Skip to content

Latest commit

 

History

History
147 lines (113 loc) · 5.91 KB

README.md

File metadata and controls

147 lines (113 loc) · 5.91 KB

SeisSplit

SeisSplit is a package for measuring shear wave splitting using the minimum eigenvalue method of Silver & Chan (1991), as modified by Walsh et al. (2013).

It uses the Seis.jl package which provides fast, flexible seismic analysis.

Computation of splitting using the rotation-correlation method (e.g., Bowman & Ando, 1987) is also possible. This is computed automatically by the main splitting function for quality control purposes.

Installing

julia> ] # Press ']' to get to package mode

(@v1.5) pkg> add https://github.com/anowacki/Geodesics.jl https://github.com/anowacki/Seis.jl https://github.com/anowacki/SeisSplit.jl

Using

The splitting function performs shear wave splitting analysis and returns a SeisSplit.Result type containing information about the analysis. Provide two Seis.Traces, and optionally specify the maximum delay time and number of fast orientation and delay time analysis points.

We can show an example of using SeisSplit on some synthetic test data, where the signal has had splitting of 1.4 s applied with a fast shear wave orientation of 40°. Looking at the result s, the values of s.phi_best and s.dt_best show have recovered the expected splitting parameters:

julia> using Seis, SeisSplit

julia> data_dir = joinpath(dirname(pathof(SeisSplit)), "..", "test", "data");

julia> n, e = Seis.read_sac.(joinpath(data_dir, "wave.BH") .* ("N", "E"))
(Seis.Trace(.SWAV..BHN: delta=0.05, b=0.0, nsamples=1999), Seis.Trace(.SWAV..BHE: delta=0.05, b=0.0, nsamples=1999))

julia> s = splitting(n, e, 15, 35)
SeisSplit.Result{Float32,Array{Float32,1}}:
           phi: -90.0:1.0:90.0
            dt: 0.0:0.1:4.0
          lam1: 181×41 Array{Float32,2}: [68.06532, ..., 68.06532]
          lam2: 181×41 Array{Float32,2}: [40.643196, ..., 40.643196]
      phi_best: 40.0 °
          dphi: 0.5 °
       dt_best: 1.4 s
           ddt: 0.025 s
          spol: 10.00806 °
         dspol: 0.22093524 °
        trace1: Seis.Trace(.SWAV..BHN: delta=0.05, b=0.0, nsamples=1999)
        trace2: Seis.Trace(.SWAV..BHE: delta=0.05, b=0.0, nsamples=1999)
  window_start: 15 s
    window_end: 35 s
           ndf: 302
     xcorr_phi: 90 Array{Float64,1}: [-90.0, ..., -88.0]
      xcorr_dt: 81 Array{Float32,1}: [0.0, ..., 0.05]
     xcorr_map: 81×90 Array{Float32,2}: [0.48693663, ..., 0.5155819]
xcorr_phi_best: 42.0 °
 xcorr_dt_best: 1.35 s

The following is the docstring for the splitting function:

    splitting(t1, t2, window_start=starttime(t1), window_end=endtime(t1); nphi=181, ndt=41, dt_max=4, xcorr=true) -> results

Perform a search over a pair of Seis traces, `t1` and `t2`, for the smallest value of the
minimum eigenvalue of the covariance matrix between the traces, for a set of `nphi`×`ndt`
shear wave splitting operators, up to `dt_max` s.

 ## Output

`results` is a `SeisSplit.Result` containing:

- `phi`: The set of fast shear wave orientations in °
- `dt`: The set of delays times in s
- `lam1`: The larger eigenvalues at each [phi,dt] point
- `lam2`: The smaller eigenvalues at each point
- `phi_best` and `dphi`: The best ϕ and its 1σ uncertainty.  ϕ is measured
  clockwise from local north (towards east) in °.
- `dt_best` and `ddt`: The best δt and its 1σ uncertainty, in s
- `spol` and `dspol`: The source polarisation and an estimate of its uncertainty for the
  best-fitting ϕ and δt.  `spol` is given in ° clockwise of local north.
- `trace1` and `trace2`, the original input traces, where `trace2` is clockwise of `trace1`
- `window_start`, `window_end`, the analysis time window end points.
- `ndf`, the number of degrees of freedom in the signal.

If `xcorr` is `true`, then the rotation correlation map for the pair
of traces is also computed and the following additional fields are
present in `results`:

- `xcorr_phi`: Angles over which rotation correlation was calculated (°)
- `xcorr_dt`: Delay times over which rotation correlation was calculated (s)
- `xcorr_map`: Cross correlation at each [phi,dt] point
- `xcorr_phi_best`: Fast orientation of maximum cross correlation (°)
- `xcorr_dt_best`: Delay time of maximum cross correlation (s)

Plotting results

You can create a diagnostic plot of a SeisSplit.Result by loading Plots.jl and calling plot() on the result:

julia> using Plots

julia> plot(s)

Example of a SeisSplit diagnostic plot

(Note that Plots.jl must be included in the current environment; if it is not, then simply do import Pkg; Pkg.add("Plots") first.)

Contributing

To report a bug, please open an issue and provide as much detail as possible to reproduce the bug. Ideally this should be in the form of some code representing a minimal non-working example (MWE), but all reports are welcome. I will try and fix any bugs that are reported, but please note that this may not be very quickly, depending on my other commitments.

Pull requests (especially if they implement bug fixes) are very welcome. Feature requests will be seriously considered. Please make sure that new code comes with tests, and that all tests pass with your addition.

References

  • Bowman, J. R., Ando, M., 1987. Shear-wave splitting in the upper-mantle wedge above the Tonga subduction zone. Geophys J R Astr Soc 88, 25–41. doi:10.1111/j.1365-246X.1987.tb01367.x
  • Silver, P.G., Chan, W.W., 1991. Shear-wave splitting and subcontinental mantle deformation. J Geophys Res-Sol Ea 96, 16429–16454. doi:10.1029/91JB00899
  • Walsh, E., Arnold, R., Savage, M.K., 2013. Silver and Chan revisited. Journal of Geophysical Research: Solid Earth 118, 5500–5515. doi:10.1002/jgrb.50386