Skip to content

Latest commit

 

History

History
59 lines (40 loc) · 1.92 KB

README.md

File metadata and controls

59 lines (40 loc) · 1.92 KB
Raw

Voron Trident Belted Z Mod

Belted Z Mod for the Voron Trident 3d printer

Adapted from the Tiny-M Belted Z mod by @quasi (https://github.com/gsl12/Tiny-M/tree/master/usermods/belted_z_mod)

This was done in Tinkercad - so there is no proper CAD for it. I have below a few 3d views views of the assembly:

3D Views

Full Assembly view alt text

The extrusions in blue are the additional ones to be added to support the z drives.

Left Z Drive Detail View alt text alt text

The front right will be a mirror of the above assembly. The back z drive is setup similarly but has a different z mount (please refer full assembly view).

Additional / Replacement Components (Per Z Drive - multiply by 3 for the trident)

Extrusions

2x 2020 Extrusion 470mm long (for 350x350 build)

Electronics

Nema 17 48mm Motors - speced similarly to the Voron 2.4 z drive motors.

Motion

  • 1x F695-2RS Bearing
  • 1x MF105-2RS Bearing
  • 1x 5mm shaft 78 mm - I recommend measuring for yourself
  • 1x 2GT Belt Loop (6mm wide) 188mm
  • 1x 2GT Open Belt LL-2GT-6 (9mm wide)
  • 1x 2GT 20T Pulley 9mm, 5mm Bore
  • 1x 2GT 16T Pulley 6mm, 5mm bore
  • 1x 2GT 80T Pulley 6mm, 5mm Bore
  • 1x 2GT 20T Toothed Idler 9mm, 5mm Bore

Hardware

  • M3x5x4 Heatset Inserts AliExpress
  • M3 roll in T-nuts AliExpress
  • M5 roll in T-nuts AliExpress
  • M3 washer
  • M5x10 BHCS
  • M5x20 BHCS (Idler pulley holder mounting to Front Idlers)
  • M5 Hex Nut
  • M3 Hex Nut (Belt Clamp Mounting)
  • M3x6 SHCS (Belt Clamp Mounting)
  • M3x8 SHCS (Belt Clamp Mounting)
  • M5x30 BHCS (Idler Pulley)

The above hardware is not a comprehensive list - i used whatever was needed at the time and did not keep track. Will catalogue this soon.