Delinea DevOps Secrets Vault Kubernetes Secret Injector and Syncer

A Kubernetes Mutating Webhook that injects Secret data from Delinea DevOps Secrets Vault (DSV) into Kubernetes Secrets and a CronJob that subsequently periodically synchronizes them from the source, DSV. The webhook can be hosted as a pod or as a stand-alone service. Likewise, the cronjob can run inside or outside the cluster.

The webhook intercepts CREATE Secret admissions and then mutates the Secret with data from DSV. The syncer scans the cluster (or a single namespace) for Secrets that were mutated and, upon finding a mutated secret, it compares the version of the DSV Secret with the version it was mutated with and, if the version in DSV is newer, then the mutation is repeated.

The common configuration consists of one or more Client Credential Tenant mappings. The credentials are then specified in an Annotation on the Kubernetes Secret to be mutated. See below.

The webhook and syncer use the Golang SDK to communicate with the DSV API.

They were tested with Docker Desktop and Minikube. They also work on OpenShift, Microk8s and others.

Injector and Syncer Differences

Injector: This is a mutating webhook using AdmissionController. This means it operates on the CREATE of a Secret, and ensures it modified before finishing the creation of the resource in Kubernetes. This only runs on the creation action triggered by the server.
Syncer: In contrast, the syncer is a normal cronjob operating on a schedule, checking for any variance in the data between the Secret data between the resource in Kubernetes and the expected value from DSV.

Which Should I Use?

Both: If you want a secret to be injected on creation and also synced on your cron schedule then use the Injector and Syncer.
Injector: If you want the secret to be static despite the change upstream in DSV, and will recreate the secret on any need to upgrade, then the injector. This will reduce the API calls to DSV as well.
Syncer: If you want the secret value to be updated within the targeted schedule automatically. If this is run by itself without the injector, there can be a lag of up to a minute before the syncer will update the secret. Your application should be able to handle retrying the load of the credential to avoid using the cached credential value that might have been loaded on app start-up in this case.

Local Development Tooling

Make: Makefiles provide core automation.
Mage: Mage is a Go based automation alternative to Make and provides newer functionality for local Kind cluster setup, Go development tooling/linting, and more. Requires Go 17+ and is easily installed via: go install github.com/magefile/mage@latest. Run mage -l to list all available tasks, and mage init to setup developer tooling.
Pre-Commit: Requires Python3. Included in project, this allows linting and formatting automation before committing, improving the feedback loop.
Optional:
- Devcontainer configuration included for VSCode to work with Devcontainers and Codespaces in a pre-built development environment that works on all platforms, and includes nested Docker + ability to run Kind kubernetes clusters without any installing any of those on the Host OS.
- Direnv: Default test values are loaded on macOS/Linux based system using direnv. Run direnv allow in the directory to load default env configuration for testing.
- macOS/Linux: Trunk.io to provide linting and formatting on the project. Included in recommended extensions.
  - trunk install, trunk check, and trunk fmt simplifies running checks.

List of Mage Tasks

mage -l will give you a list of tasks.
mage -h init provides more help detail on a task when it's available.

Configure

The configuration requires a JSON formatted list of Client Credential and Tenant mappings.

{
  "app1": {
    "credentials": {
      "clientId": "93d866d4-635f-4d4e-9ce3-0ef7f879f319",
      "clientSecret": "xxxxxxxxxxxxxxxxxxxxxxxxx-xxxxxxxxxxx-xxxxx"
    },
    "tenant": "mytenant"
  },
  "default": {
    "credentials": {
      "clientId": "64241412-3934-4aed-af26-95b1eaba0e6a",
      "clientSecret": "xxxxxxxxxxxxxxxxxxxxxxxxx-xxxxxxxxxxx-xxxxx"
    },
    "tenant": "mytenant"
  }
}

*** note *** the injector uses the default credentials when mutating a Kubernetes Secret without a credentialAnnotation. See below

Local

Run

The injector uses the HTTPS server built-in to the Golang http package to host the Kubernetes Mutating Webhook Webservice.

$ ./dsv-injector -h
Usage of ./dsv-injector:
  -address string
        the address to listen on, e.g., 'localhost:8080' or ':8443' (default ":18543")
  -cert string
        the path of the public certificate file in PEM format (default "tls/cert.pem")
  -credentials string
        the path of JSON formatted credentials file (default "credentials/config.json")
  -key string
        the path of the private key file in PEM format (default "tls/key.pem")

Thus the injector can run "anywhere," but, typically, the injector runs as a POD in the Kubernetes cluster that uses it.

The syncer is a simple Golang executable. It typically runs as a Kubernetes CronJob, but it will run outside the cluster.

$ ./dsv-syncer -h
Usage of ./dsv-syncer:
  -credentials string
        the path of JSON formatted credentials file (default "credentials/config.json")
  -kubeConfig string
        the Kubernetes Client API configuration file; ignored when running in-cluster (default "/home/user/.kube/config")
  -namespace string
        the Kubernetes namespace containing the Secrets to sync; "" (the default) for all namespaces

Build

*** note *** Building the dsv-injector image is not required to install it as it is. It is available on multiple public registries.

Building the image requires Docker or Podman and GNU Make.

To build it, run: make.

This will build the injector and syncer as platform binaries and store them in the project root. It will also build the image (which will build and store its own copy of the binaries) using $(DOCKER).

Test

The tests expect a few environmental conditions to be met.

*** note *** For more detailed setup see collapsed section below for DSV Test Configuration Setup.

A valid DSV tenant.
A secret created with the data format below: { "data": { "password": "admin", "username": "admin" }, "version": "0" }
A configs/credentials.json to be created manually that contains the client credentials.
The configs/credentials.json credential to be structured like this:

{ "app1": { "credentials": { "clientId": "", "clientSecret": "" }, "tenant": "app1" } }

*** warning *** app1 is required and using any other will fail test conditions.

🧪 DSV Test Configuration Setup

Using dsv cli (grab from downloads and install with snippet adjusted to version: $(curl -fSSL https://dsv.secretsvaultcloud.com/downloads/cli/1.35.2/dsv-linux-x64 -o ./dsv-linux-x64 && chmod +x ./dsv-linux-x64 && sudo mv ./dsv-linux-x64 /usr/local/bin/dsv && dsv --version
Run dsv init (Use a local user)
Create the role that will allow creating a client for programmatic access: dsv role create --name 'k8s' --desc 'test profile for k8s'
dsv secret create --path 'k8s:sync:test' --data '{"password": "admin","username": "admin"}'
Create a policy that allows the local user to read the secret, modify this to the correct user/group mapping: dsv policy create -- actions 'read' --path 'secrets:k8s' --desc 'test access to secret' --resources 'secrets:k8s:<.*>' --subjects 'roles:k8s'
Create the client: dsv client create --role k8s
Use those credentials in the structure mentioned above.

To invoke the tests, run:

make test

Set $(GO_TEST_FLAGS) to -v to get DEBUG output.

They require a credentials.json as either a file or a string. They also require the path to a secret to test to use. Use environment variables to specify both:

Environment Variable	Default	Explanation
`DSV_K8S_TEST_CONFIG`	none	Contain a JSON string containing a valid `credentials.json`
`DSV_K8S_TEST_CONFIG_FILE`	`../../configs/credentials.json`	The path to a valid `credentials.json`
`DSV_K8S_TEST_SECRET_PATH`	`/test/secret`	The path to the secret to test against in the vault

ℹ️ NOTE: DSV_K8S_TEST_CONFIG takes precedence over DSV_K8S_TEST_CONFIG_FILE

For example:

DSV_K8S_TEST_CONFIG='{"app1":{"credentials":{"clientId":"93d866d4-635f-4d4e-9ce3-0ef7f879f319","clientSecret":"xxxxxxxxxxxxxxxxxxxxxxxxx-xxxxxxxxxxx-xxxxx"},"tenant":"mytenant"}}' \
DSV_K8S_TEST_SECRET_PATH=my:test:secret \
make test GO_TEST_FLAGS='-v'

To remove the binaries and Docker image so that the next build is from scratch, run:

make clean

For Go development, another option is to run gotestsum (installed automatically with mage init) with a filewatch option to get regular test output:

gotestsum --format dots-v2 --watch ./... -- -v

Install

Installation requires Helm. There are two separate charts for the injector and the syncer. The Makefile demonstrates a typical installation of both.

The dsv-injector chart imports credentials.json from the filesystem and stores it in a Kubernetes Secret. The dsv-syncer chart refers to that Secret instead of creating its own.

The Helm values.yaml file image.repository is quay.io/delinea/dsv-k8s:

image:
  repository: quay.io/delinea/dsv-k8s
  pullPolicy: IfNotPresent
  # Overrides the image tag whose default is the chart appVersion.
  tag: ""

That means, by default, make install will pull from Red Hat Quay.

make install

However, the Makefile contains an install-image target that configures Helm to use the image built with make image:

make install-image

make uninstall uninstalls the Helm Charts.

Docker Desktop

To install the locally built image into Docker Desktop, run:

make install-image

ℹ️ NOTE: Kubernetes must be enabled for this to work.

Remote Cluster

Deploying the locally built image into a remote Cluster will require a container registry. The container registry must be accessible from the build and the cluster by the same DNS name. make will run the release target, which will push the image into the container registry, install-cluster will cause the cluster to pull it from there.

make install-cluster REGISTRY=internal.example.com:5000

Minikube

Docker driver

To deploy to Minikube running on the Docker driver, run eval $(minikube docker-env) so that the environment shares Minikube's docker context, then follow the Docker Desktop instructions.

VM driver

To deploy to Minikube set-up with the VM driver, e.g., Linux kvm2 or Microsoft Hyper-V, enable the Minikube built-in registry and use it to make the image available to the Minikube VM:

minikube addons enable registry

❗NOTE: run Minikube tunnel in a separate terminal to make the registry service available to the host.

minikube tunnel

It will run continuously, and stopping it will render the registry inaccessible.

Next, get the host:port of the registry:

kubectl get -n kube-system service registry -o jsonpath="{.spec.clusterIP}{':'}{.spec.ports[0].port}"

Finally, follow the Remote Cluster instructions using it as $(REGISTRY)

Kind

For local development, Mage tasks have been created to automate most of the setup and usage for local testing.

Run mage init to setup dev tooling.
Ensure your local configs/credentials.json exists.
run mage kind:init k8s:init helm:init to setup a local kind cluster, initial local copies of the helm chart and kubernetes manifest files.
Modify the .cache/dsv-injector/values.yaml with the embedded credentials.json contents matching your configs/credentials.json.
Modify the .cache/manifests/*.yaml files to match the credentials you want to test against.
To deploy (or redeploy after changes) all the helm charts and kuberenetes manifests run mage job:redeploy.

Host (for debugging)

Per above, typically, the injector runs as a POD in the cluster but running it on the host makes debugging easier.

make install-host EXTERNAL_NAME=laptop.mywifi.net CA_BUNDLE=$(cat /path/to/ca.crt | base64 -w0 -)

For it to work:

The certificate that the injector presents must validate against the $(CA_BUNDLE).
The certificate must also have a Subject Alternative Name for $(INJECTOR_NAME).$(NAMESPACE).svc. By default that's dsv-injector.dsv.svc.
The $(EXTERNAL_NAME) is a required argument, and the name itself must be resolvable inside the cluster. localhost will not work.

If the $(CA_BUNDLE) is argument is omitted, make will attempt to extract it from kubectl config:

install-host: CA_BUNDLE_KUBE_CONFIG_INDEX = 0
install-host: CA_BUNDLE_JSON_PATH = {.clusters[$(CA_BUNDLE_KUBE_CONFIG_INDEX)].cluster.certificate-authority-data}
install-host: CA_BUNDLE=$(shell $(KUBECTL) config view --raw -o jsonpath='$(CA_BUNDLE_JSON_PATH)' | tr -d '"')

which will make:

kubectl config view --raw -o jsonpath='{.clusters[0].cluster.certificate-authority-data}' | tr -d '"'

Optionally set $(CA_BUNDLE_KUBE_CONFIG_INDEX) to use 1, to use the second cluster in your configuration, 2 for the third and so on.

ℹ️ All this assumes that the injector uses a certificate signed by the cluster CA. There are several options like cert-manager for getting cluster-signed certs, however, this simple bash script will request and grant a suitable certificate from the cluster using cURL and OpenSSL. To use it:

get_k8s_cert.sh -n dsv-injector -N dsv

Now run it:

./dsv-injector -cert ./dsv-injector.pem -key ./dsv-injector.key -credentials ./configs/credentials.json -address :8543

Use

Once the injector is available in the Kubernetes cluster, and the webhook is in place, any correctly annotated Kubernetes Secrets are modified on create and update.

The four annotations that affect the behavior of the webhook are:

const(
    credentialsAnnotation = "dsv.delinea.com/credentials"
    setAnnotation         = "dsv.delinea.com/set-secret"
    addAnnotation         = "dsv.delinea.com/add-to-secret"
    updateAnnotation      = "dsv.delinea.com/update-secret"
)

credentialsAnnotation selects the credentials that the injector uses to retrieve the DSV Secret. If the credentials are present, it must map to Client Credential and Tenant mapping. The injector will use the default Credential and Tenant mapping unless the credentialsAnnotation is declared.

The setAnnotation, addAnnotation and updateAnnotation, must contain the path to the DSV Secret that the injector will use to mutate the Kubernetes Secret.

addAnnotation adds missing fields without overwriting or removing existing fields.
updateAnnotation adds and overwrites existing fields but does not remove fields.
setAnnotation overwrites fields and removes fields that do not exist in the DSV Secret.

NOTE: A Kubernetes Secret should specify only one of the "add," "update," or "set" annotations. The order of precedence is setAnnotation, then addAnnotation, then updateAnnotation when multiple are present.

Examples

---
apiVersion: v1
kind: Secret
metadata:
  name: example-secret
  annotations:
    dsv.delinea.com/credentials: app1
    dsv.delinea.com/set-secret: /test/secret
type: Opaque
data:
  username: dW5tb2RpZmllZC11c2VybmFtZQ==
  domain: dW5tb2RpZmllZC1kb21haW4=
  password: dW5tb2RpZmllZC1wYXNzd29yZA==

The above example specifies credentials, so a mapping for those credentials must exist in the current webhook configuration. It uses the setAnnotation, so the data in the injector will overwrite the existing contents of the Kubernetes Secret; if /test/secret contains a username and password but no domain, then the Kubernetes Secret would get the username and password from the DSV Secret Data but, the injector will remove the domain field.

There are more examples in the examples directory. They show how the different annotations work.

Other Dev Tools

Use Stern to easily stream cross namespace logs with the dsv-filter-selector by running:

To grab Stern binary, you can run $(curl -fSSl https://github.com/wercker/stern/releases/download/1.11.0/stern_linux_amd64 -o ./stern) && sudo chmod +x ./stern && sudo mv ./stern /usr/local/bin. (Modify version as you need)
For all pods in the namespace run stern --kubeconfig .cache/config --namespace dsv --timestamps .
For pods with the selector run stern --kubeconfig .cache/config --namespace dsv --timestamps --selector 'dsv-filter-name in (dsv-syncer, dsv-injector)'

Reference Mage Tasks

Manually updated, for most recent Mage tasks, run mage -l.

Target	Description
clean	up after yourself.
gittools:init	⚙️ Init runs all required steps to use this package.
go:doctor	🏥 Doctor will provide config details.
go:fix	🔎 Run golangci-lint and apply any auto-fix.
go:fmt	✨ Fmt runs gofumpt.
go:init	⚙️ Init runs all required steps to use this package.
go:lint	🔎 Run golangci-lint without fixing.
go:lintConfig	🏥 LintConfig will return output of golangci-lint config.
go:test	🧪 Run go test.
go:testSum	🧪 Run gotestsum (Params: Path just like you pass to go test, ie ./..., pkg/, etc ).
go:tidy	🧹 Tidy tidies.
go:wrap	✨ Wrap runs golines powered by gofumpt.
helm:docs	generates helm documentation using `helm-doc` tool.
helm:init	⚙️ Init sets up the required files to allow for local editing/overriding from CacheDirectory.
helm:install	🚀 Install uses Helm to install the chart.
helm:lint	🔍 Lint uses Helm to lint the chart for issues.
helm:render	💾 Render uses Helm to output rendered yaml for testing helm integration.
helm:uninstall	🚀 Uninstall uses Helm to uninstall the chart.
init	runs multiple tasks to initialize all the requirements for running a project for a new contributor.
job:redeploy	removes kubernetes resources and helm charts and then redeploys with log streaming by default.
job:setup	initializes all the required steps for the cluster creation, initial helm chart copies, and kubeconfig copies.
k8s:apply	applies a kubernetes manifest.
k8s:delete	Apply applies a kubernetes manifest.
k8s:init	copies the k8 yaml manifest files from the examples directory to the cache directory for editing and linking in integration testing.
k8s:logs	streams logs until canceled for the dsv syncing jobs, based on the label `dsv.delinea.com: syncer`.
kind:destroy	🗑️ Destroy tears down the Kind cluster.
kind:init	➕ Create creates a new Kind cluster and populates a kubeconfig in cachedirectory.
precommit:commit	🧪 Commit runs pre-commit checks using pre-commit.
precommit:init	⚙️ Init configures precommit hooks.
precommit:prepush	🧪 Push runs pre-push checks using pre-commit.
precommit:uninstall	✖ Uninstall removes the pre-commit hooks.
secrets:detect	🔐 Detect scans for secret violations with gitleaks without git consideration.
secrets:protect	🔐 Protect scans the staged artifacts for violations.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

README.md

README.md

Delinea DevOps Secrets Vault Kubernetes Secret Injector and Syncer

Injector and Syncer Differences

Which Should I Use?

Local Development Tooling

List of Mage Tasks

Configure

Local

Run

Build

Test

Install

Docker Desktop

Remote Cluster

Minikube

Docker driver

VM driver

Kind

Host (for debugging)

Use

Examples

Other Dev Tools

Reference Mage Tasks

Files

README.md

Latest commit

History

README.md

File metadata and controls

Delinea DevOps Secrets Vault Kubernetes Secret Injector and Syncer

Injector and Syncer Differences

Which Should I Use?

Local Development Tooling

List of Mage Tasks

Configure

Local

Run

Build

Test

Install

Docker Desktop

Remote Cluster

Minikube

Docker driver

VM driver

Kind

Host (for debugging)

Use

Examples

Other Dev Tools

Reference Mage Tasks