diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h
index 51d419da0460..74ff44d9905b 100644
--- a/Marlin/src/core/boards.h
+++ b/Marlin/src/core/boards.h
@@ -425,6 +425,7 @@
#define BOARD_CREALITY_V24S1_301F4 4240 // Creality v2.4.S1_301F4 (STM32F401RC) as found in the Ender-3 S1 F4
#define BOARD_OPULO_LUMEN_REV4 4241 // Opulo Lumen PnP Controller REV4 (STM32F407VE / STM32F407VG)
#define BOARD_FYSETC_SPIDER_KING407 4242 // FYSETC Spider King407 (STM32F407ZG)
+#define BOARD_MKS_SKIPR_V1 4243 // MKS SKIPR v1.0 all-in-one board (STM32F407VE)
//
// ARM Cortex M7
diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h
index 9efafe9af566..c623b4844d20 100644
--- a/Marlin/src/pins/pins.h
+++ b/Marlin/src/pins/pins.h
@@ -709,6 +709,8 @@
#include "stm32f4/pins_OPULO_LUMEN_REV4.h" // STM32F4 env:Opulo_Lumen_REV4
#elif MB(FYSETC_SPIDER_KING407)
#include "stm32f4/pins_FYSETC_SPIDER_KING407.h" // STM32F4 env:FYSETC_SPIDER_KING407
+#elif MB(MKS_SKIPR_V1)
+ #include "stm32f4/pins_MKS_SKIPR_V1_0.h" // STM32F4 env:mks_skipr_v1 env:mks_skipr_v1_nobootloader
//
// ARM Cortex M7
diff --git a/Marlin/src/pins/stm32f4/pins_MKS_SKIPR_V1_0.h b/Marlin/src/pins/stm32f4/pins_MKS_SKIPR_V1_0.h
new file mode 100644
index 000000000000..046fbb95bf29
--- /dev/null
+++ b/Marlin/src/pins/stm32f4/pins_MKS_SKIPR_V1_0.h
@@ -0,0 +1,381 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+#include "env_validate.h"
+
+#if HOTENDS > 4 || E_STEPPERS > 4
+ #error "MKS SKIPR supports up to 4 hotends / E steppers."
+#endif
+
+#define BOARD_INFO_NAME "MKS SKIPR V1.0"
+
+// Valid SERIAL_PORT values: -1 (USB-C), 1 (direct to RK3328), 3 (USART3 header)
+
+#define USES_DIAG_JUMPERS
+
+// Onboard I2C EEPROM
+#define I2C_EEPROM
+#define MARLIN_EEPROM_SIZE 0x1000 // 4KB (AT24C32)
+#define I2C_SCL_PIN PB8
+#define I2C_SDA_PIN PB9
+
+//
+// Servos
+//
+#define SERVO0_PIN PA8
+
+//
+// Trinamic Stallguard pins // Connector labels
+#define X_DIAG_PIN PA14 // X-
+#define Y_DIAG_PIN PA15 // Y-
+#define Z_DIAG_PIN PB15 // Z-
+#define E0_DIAG_PIN PA13 // MT-DET
+#define E1_DIAG_PIN PC5 // NEOPIXEL
+#define E2_DIAG_PIN PB14 // Z+
+
+//
+// Check for additional used endstop pins
+//
+#if HAS_EXTRA_ENDSTOPS
+ #define _ENDSTOP_IS_ANY(ES) X2_USE_ENDSTOP == ES || Y2_USE_ENDSTOP == ES || Z2_USE_ENDSTOP == ES || Z3_USE_ENDSTOP == ES || Z4_USE_ENDSTOP == ES
+ #if _ENDSTOP_IS_ANY(_XMIN_) || _ENDSTOP_IS_ANY(_XMAX_)
+ #define NEEDS_X_MINMAX 1
+ #endif
+ #if _ENDSTOP_IS_ANY(_YMIN_) || _ENDSTOP_IS_ANY(_YMAX_)
+ #define NEEDS_Y_MINMAX 1
+ #endif
+ #if _ENDSTOP_IS_ANY(_ZMIN_) || _ENDSTOP_IS_ANY(_ZMAX_)
+ #define NEEDS_Z_MINMAX 1
+ #endif
+ #undef _ENDSTOP_IS_ANY
+#endif
+
+//
+// Limit Switches
+//
+#ifdef X_STALL_SENSITIVITY
+ #define X_STOP_PIN X_DIAG_PIN // X-
+#elif EITHER(DUAL_X_CARRIAGE, NEEDS_X_MINMAX)
+ #ifndef X_MIN_PIN
+ #define X_MIN_PIN X_DIAG_PIN // X-
+ #endif
+ #ifndef X_MAX_PIN
+ #define X_MAX_PIN E0_DIAG_PIN // MT-DET
+ #endif
+#else
+ #define X_STOP_PIN X_DIAG_PIN // X-
+#endif
+
+#ifdef Y_STALL_SENSITIVITY
+ #define Y_STOP_PIN Y_DIAG_PIN // Y-
+#elif NEEDS_Y_MINMAX
+ #ifndef Y_MIN_PIN
+ #define Y_MIN_PIN Y_DIAG_PIN // Y-
+ #endif
+ #ifndef Y_MAX_PIN
+ #define Y_MAX_PIN E1_DIAG_PIN // NEOPIXEL
+ #endif
+#else
+ #define Y_STOP_PIN Y_DIAG_PIN // Y-
+#endif
+
+#ifdef Z_STALL_SENSITIVITY
+ #define Z_STOP_PIN Z_DIAG_PIN // Z-
+#elif NEEDS_Z_MINMAX
+ #ifndef Z_MIN_PIN
+ #define Z_MIN_PIN Z_DIAG_PIN // Z-
+ #endif
+ #ifndef Z_MAX_PIN
+ #define Z_MAX_PIN E2_DIAG_PIN // Z+
+ #endif
+#else
+ #define Z_STOP_PIN Z_DIAG_PIN // Z-
+#endif
+
+#if DISABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) || ENABLED(USE_PROBE_FOR_Z_HOMING)
+ #ifndef Z_MIN_PROBE
+ #define Z_MIN_PROBE_PIN E2_DIAG_PIN // defaults to 'Z+' connector
+ #endif
+#endif
+
+#undef NEEDS_X_MINMAX
+#undef NEEDS_Y_MINMAX
+#undef NEEDS_Z_MINMAX
+
+//
+// Steppers
+//
+#define X_STEP_PIN PC14
+#define X_DIR_PIN PC13
+#define X_ENABLE_PIN PC15
+#ifndef X_CS_PIN
+ #define X_CS_PIN PE6
+#endif
+
+#define Y_STEP_PIN PE5
+#define Y_DIR_PIN PE4
+#define Y_ENABLE_PIN PD14
+#ifndef Y_CS_PIN
+ #define Y_CS_PIN PE3
+#endif
+
+#define Z_STEP_PIN PE1 // "Z1"
+#define Z_DIR_PIN PE0
+#define Z_ENABLE_PIN PE2
+#ifndef Z_CS_PIN
+ #define Z_CS_PIN PB7
+#endif
+
+#define E0_STEP_PIN PB5
+#define E0_DIR_PIN PB4
+#define E0_ENABLE_PIN PB6
+#ifndef E0_CS_PIN
+ #define E0_CS_PIN PB3
+#endif
+
+#define E1_STEP_PIN PD6 // "Z2"
+#define E1_DIR_PIN PD5
+#define E1_ENABLE_PIN PD7
+#ifndef E1_CS_PIN
+ #define E1_CS_PIN PD4
+#endif
+
+#define E2_STEP_PIN PD2 // "Z3"
+#define E2_DIR_PIN PD1
+#define E2_ENABLE_PIN PD3
+#ifndef E2_CS_PIN
+ #define E2_CS_PIN PD0
+#endif
+
+#define E3_STEP_PIN PC7 // "Z4"
+#define E3_DIR_PIN PC6
+#define E3_ENABLE_PIN PC8
+#ifndef E3_CS_PIN
+ #define E3_CS_PIN PD15
+#endif
+
+//
+// Temperature Sensors
+//
+#define TEMP_BED_PIN PC0 // TB
+#define TEMP_0_PIN PC1 // TH0
+#define TEMP_1_PIN PC2 // TH1
+#define TEMP_2_PIN PC3 // TH2
+
+//
+// Heaters / Fans
+//
+#define HEATER_BED_PIN PD12 // Hotbed
+#define HEATER_0_PIN PB1 // Heater0
+#define HEATER_1_PIN PB0 // Heater1
+#define HEATER_2_PIN PA3 // Heater2
+
+#define FAN_PIN PA2 // Fan0
+#define FAN1_PIN PA1 // Fan1
+#define FAN2_PIN PA0 // Fan2
+
+//
+// Software SPI pins for TMC2130 stepper drivers
+// This board doesn't support hardware SPI there
+//
+#if HAS_TMC_SPI
+ #define TMC_USE_SW_SPI
+ #define TMC_SW_MOSI PE14
+ #define TMC_SW_MISO PE13
+ #define TMC_SW_SCK PE12
+#endif
+
+//
+// TMC2208/TMC2209 stepper drivers
+// This board is routed for one-wire software serial
+//
+#if HAS_TMC_UART
+ #define X_SERIAL_TX_PIN PE6
+ #define X_SERIAL_RX_PIN X_SERIAL_TX_PIN
+
+ #define Y_SERIAL_TX_PIN PE3
+ #define Y_SERIAL_RX_PIN Y_SERIAL_TX_PIN
+
+ #define Z_SERIAL_TX_PIN PB7
+ #define Z_SERIAL_RX_PIN Z_SERIAL_TX_PIN
+
+ #define E0_SERIAL_TX_PIN PB3
+ #define E0_SERIAL_RX_PIN E0_SERIAL_TX_PIN
+
+ #define E1_SERIAL_TX_PIN PD4
+ #define E1_SERIAL_RX_PIN E1_SERIAL_TX_PIN
+
+ #define E2_SERIAL_TX_PIN PD0
+ #define E2_SERIAL_RX_PIN E2_SERIAL_TX_PIN
+
+ #define E3_SERIAL_TX_PIN PD15
+ #define E3_SERIAL_RX_PIN E3_SERIAL_TX_PIN
+
+ // Reduce baud rate to improve software serial reliability
+ #define TMC_BAUD_RATE 19200
+#endif
+
+/** ------ ------
+ * (BEEPER) PB2 | 1 2 | PE10 (BTN_ENC) (MISO) PA6 | 1 2 | PA5 (SCK)
+ * (LCD_EN) PE11 | 3 4 | PD10 (LCD_RS) (BTN_EN1) PE9 | 3 4 | PA4 (SD_SS)
+ * (LCD_D4) PD9 | 5 6 PD8 (LCD_D5) (BTN_EN2) PE8 | 5 6 PA7 (MOSI)
+ * (LCD_D6) PE15 | 7 8 | PE7 (LCD_D7) (SD_DETECT) PD13 | 7 8 | RESET
+ * GND | 9 10 | 5V GND | 9 10 | --
+ * ------ ------
+ * EXP1 EXP2
+ */
+#define EXP1_01_PIN PB2
+#define EXP1_02_PIN PE10
+#define EXP1_03_PIN PE11
+#define EXP1_04_PIN PD10
+#define EXP1_05_PIN PD9
+#define EXP1_06_PIN PD8
+#define EXP1_07_PIN PE15
+#define EXP1_08_PIN PE7
+
+#define EXP2_01_PIN PA6
+#define EXP2_02_PIN PA5
+#define EXP2_03_PIN PE9
+#define EXP2_04_PIN PA4
+#define EXP2_05_PIN PE8
+#define EXP2_06_PIN PA7
+#define EXP2_07_PIN PD13
+#define EXP2_08_PIN -1 // connected to MCU reset
+
+//
+// SD Support
+// Onboard SD card use hardware SPI3 (defined in variant), LCD SD card use hardware SPI1
+//
+#if ENABLED(SDSUPPORT)
+ #ifndef SDCARD_CONNECTION
+ #define SDCARD_CONNECTION LCD
+ #endif
+ #if SD_CONNECTION_IS(ONBOARD)
+ //#define SOFTWARE_SPI
+ //#define SD_SPI_SPEED SPI_HALF_SPEED
+ #undef SD_DETECT_STATE
+ #define SD_DETECT_STATE LOW
+ #define SD_DETECT_PIN PC4
+ #elif SD_CONNECTION_IS(LCD)
+ //#define SOFTWARE_SPI
+ //#define SD_SPI_SPEED SPI_QUARTER_SPEED
+ #define SD_SS_PIN EXP2_04_PIN
+ #define SD_SCK_PIN EXP2_02_PIN
+ #define SD_MISO_PIN EXP2_01_PIN
+ #define SD_MOSI_PIN EXP2_06_PIN
+ #define SD_DETECT_PIN EXP2_07_PIN
+ #elif SD_CONNECTION_IS(CUSTOM_CABLE)
+ #error "CUSTOM_CABLE is not a supported SDCARD_CONNECTION for this board"
+ #endif
+ #define SDSS SD_SS_PIN
+#endif
+
+//
+// LCDs and Controllers
+//
+#if IS_TFTGLCD_PANEL
+
+ #if ENABLED(TFTGLCD_PANEL_SPI)
+ #define TFTGLCD_CS EXP2_03_PIN
+ #endif
+
+#elif HAS_WIRED_LCD
+
+ #define BEEPER_PIN EXP1_01_PIN
+ #define BTN_ENC EXP1_02_PIN
+
+ #if ENABLED(CR10_STOCKDISPLAY)
+
+ #define LCD_PINS_RS EXP1_07_PIN
+
+ #define BTN_EN1 EXP1_03_PIN
+ #define BTN_EN2 EXP1_05_PIN
+
+ #define LCD_PINS_ENABLE EXP1_08_PIN
+ #define LCD_PINS_D4 EXP1_06_PIN
+
+ #else
+
+ #define LCD_PINS_RS EXP1_04_PIN
+
+ #define BTN_EN1 EXP2_03_PIN
+ #define BTN_EN2 EXP2_05_PIN
+
+ #define LCD_PINS_ENABLE EXP1_03_PIN
+ #define LCD_PINS_D4 EXP1_05_PIN
+
+ #if ENABLED(FYSETC_MINI_12864)
+ #define DOGLCD_CS EXP1_03_PIN
+ #define DOGLCD_A0 EXP1_04_PIN
+ //#define LCD_BACKLIGHT_PIN -1
+ #define LCD_RESET_PIN EXP1_05_PIN // Must be high or open for LCD to operate normally.
+ #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
+ #ifndef RGB_LED_R_PIN
+ #define RGB_LED_R_PIN EXP1_06_PIN
+ #endif
+ #ifndef RGB_LED_G_PIN
+ #define RGB_LED_G_PIN EXP1_07_PIN
+ #endif
+ #ifndef RGB_LED_B_PIN
+ #define RGB_LED_B_PIN EXP1_08_PIN
+ #endif
+ #elif ENABLED(FYSETC_MINI_12864_2_1)
+ #define NEOPIXEL_PIN EXP1_06_PIN
+ #endif
+ #endif // !FYSETC_MINI_12864
+
+ #if IS_ULTIPANEL
+ #define LCD_PINS_D5 EXP1_06_PIN
+ #define LCD_PINS_D6 EXP1_07_PIN
+ #define LCD_PINS_D7 EXP1_08_PIN
+ #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
+ #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
+ #endif
+ #endif
+
+ #endif
+#endif // HAS_WIRED_LCD
+
+// Alter timing for graphical display
+#if IS_U8GLIB_ST7920
+ #define BOARD_ST7920_DELAY_1 120
+ #define BOARD_ST7920_DELAY_2 80
+ #define BOARD_ST7920_DELAY_3 580
+#endif
+
+//
+// NeoPixel LED
+//
+#ifndef NEOPIXEL_PIN
+ #define NEOPIXEL_PIN PC5
+#endif
+
+//
+// MAX31865
+//
+#if HAS_MAX31865
+ #define TEMP_0_CS_PIN PD11
+ #define TEMP_0_SCK_PIN PE12
+ #define TEMP_0_MISO_PIN PE13
+ #define TEMP_0_MOSI_PIN PE14
+#endif
diff --git a/buildroot/share/PlatformIO/boards/marlin_MKS_SKIPR_V1.json b/buildroot/share/PlatformIO/boards/marlin_MKS_SKIPR_V1.json
new file mode 100644
index 000000000000..7ca62db00531
--- /dev/null
+++ b/buildroot/share/PlatformIO/boards/marlin_MKS_SKIPR_V1.json
@@ -0,0 +1,55 @@
+{
+ "build": {
+ "core": "stm32",
+ "cpu": "cortex-m4",
+ "extra_flags": "-DSTM32F4 -DSTM32F407xx",
+ "f_cpu": "168000000L",
+ "offset": "0xC000",
+ "hwids": [
+ [
+ "0x1EAF",
+ "0x0003"
+ ],
+ [
+ "0x0483",
+ "0x3748"
+ ]
+ ],
+ "mcu": "stm32f407vet6",
+ "product_line": "STM32F407xx",
+ "variant": "MARLIN_MKS_SKIPR_V1"
+ },
+ "debug": {
+ "default_tools": [
+ "stlink"
+ ],
+ "jlink_device": "STM32F407VE",
+ "openocd_extra_args": [
+ "-c",
+ "reset_config none"
+ ],
+ "openocd_target": "stm32f4x",
+ "svd_path": "STM32F40x.svd"
+ },
+ "frameworks": [
+ "arduino"
+ ],
+ "name": "STM32F407VE (128k RAM, 64k CCM RAM, 512k Flash",
+ "upload": {
+ "disable_flushing": false,
+ "maximum_ram_size": 131072,
+ "maximum_size": 524288,
+ "protocol": "stlink",
+ "protocols": [
+ "stlink",
+ "dfu",
+ "jlink"
+ ],
+ "offset_address": "0x0800C000",
+ "require_upload_port": false,
+ "use_1200bps_touch": false,
+ "wait_for_upload_port": false
+ },
+ "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f407ve.html",
+ "vendor": "ST"
+}
diff --git a/buildroot/share/PlatformIO/variants/MARLIN_F4x7Vx/variant.h b/buildroot/share/PlatformIO/variants/MARLIN_F4x7Vx/variant.h
index ba145d058cb3..0b78be627fc5 100644
--- a/buildroot/share/PlatformIO/variants/MARLIN_F4x7Vx/variant.h
+++ b/buildroot/share/PlatformIO/variants/MARLIN_F4x7Vx/variant.h
@@ -27,98 +27,98 @@ extern "C" {
* Pins
*----------------------------------------------------------------------------*/
-// | DIGITAL | ANALOG IN | ANALOG OUT | UART/USART | TWI | SPI | SPECIAL |
-// |---------|------------|------------|-----------------------|----------------------|-----------------------------------|-----------|
-#define PA0 PIN_A0 // | 0 | A0 (ADC1) | | UART4_TX | | | |
-#define PA1 PIN_A1 // | 1 | A1 (ADC1) | | UART4_RX | | | |
-#define PA2 PIN_A2 // | 2 | A2 (ADC1) | | USART2_TX | | | |
-#define PA3 PIN_A3 // | 3 | A3 (ADC1) | | USART2_RX | | | |
-#define PA4 PIN_A4 // | 4 | A4 (ADC1) | DAC_OUT1 | | | SPI1_SS, (SPI3_SS) | |
-#define PA5 PIN_A5 // | 5 | A5 (ADC1) | DAC_OUT2 | | | SPI1_SCK | |
-#define PA6 PIN_A6 // | 6 | A6 (ADC1) | | | | SPI1_MISO | |
-#define PA7 PIN_A7 // | 7 | A7 (ADC1) | | | | SPI1_MOSI | |
-#define PA8 8 // | 8 | | | | TWI3_SCL | | |
-#define PA9 9 // | 9 | | | USART1_TX | | | |
-#define PA10 10 // | 10 | | | USART1_RX | | | |
-#define PA11 11 // | 11 | | | | | | |
-#define PA12 12 // | 12 | | | | | | |
-#define PA13 13 // | 13 | | | | | | SWD_SWDIO |
-#define PA14 14 // | 14 | | | | | | SWD_SWCLK |
-#define PA15 15 // | 15 | | | | | SPI3_SS, (SPI1_SS) | |
-// |---------|------------|------------|-----------------------|----------------------|-----------------------------------|-----------|
-#define PB0 PIN_A8 // | 16 | A8 (ADC1) | | | | | |
-#define PB1 PIN_A9 // | 17 | A9 (ADC1) | | | | | |
-#define PB2 18 // | 18 | | | | | | BOOT1 |
-#define PB3 19 // | 19 | | | | | SPI3_SCK, (SPI1_SCK) | |
-#define PB4 20 // | 20 | | | | | SPI3_MISO, (SPI1_MISO) | |
-#define PB5 21 // | 21 | | | | | SPI3_MOSI, (SPI1_MOSI) | |
-#define PB6 22 // | 22 | | | USART1_TX | TWI1_SCL | | |
-#define PB7 23 // | 23 | | | USART1_RX | TWI1_SDA | | |
-#define PB8 24 // | 24 | | | | TWI1_SCL | | |
-#define PB9 25 // | 25 | | | | TWI1_SDA | SPI2_SS | |
-#define PB10 26 // | 26 | | | USART3_TX, (UART4_TX) | TWI2_SCL | SPI2_SCK | |
-#define PB11 27 // | 27 | | | USART3_RX | TWI2_SDA | | |
-#define PB12 28 // | 28 | | | | | SPI2_SS | |
-#define PB13 29 // | 29 | | | | | SPI2_SCK | |
-#define PB14 30 // | 30 | | | | | SPI2_MISO | |
-#define PB15 31 // | 31 | | | | | SPI2_MOSI | |
-// |---------|------------|------------|-----------------------|----------------------|-----------------------------------|-----------|
-#define PC0 PIN_A10 // | 32 | A10 (ADC1) | | | | | |
-#define PC1 PIN_A11 // | 33 | A11 (ADC1) | | | | | |
-#define PC2 PIN_A12 // | 34 | A12 (ADC1) | | | | SPI2_MISO | |
-#define PC3 PIN_A13 // | 35 | A13 (ADC1) | | | | SPI2_MOSI | |
-#define PC4 PIN_A14 // | 36 | A14 (ADC1) | | | | | |
-#define PC5 PIN_A15 // | 37 | A15 (ADC1) | | USART3_RX | | | |
-#define PC6 38 // | 38 | | | USART6_TX | | | |
-#define PC7 39 // | 39 | | | USART6_RX | | | |
-#define PC8 40 // | 40 | | | | | | |
-#define PC9 41 // | 41 | | | USART3_TX | TWI3_SDA | | |
-#define PC10 42 // | 42 | | | | | SPI3_SCK | |
-#define PC11 43 // | 43 | | | USART3_RX, (UART4_RX) | | SPI3_MISO | |
-#define PC12 44 // | 44 | | | UART5_TX | | SPI3_MOSI | |
-#define PC13 45 // | 45 | | | | | | |
-#define PC14 46 // | 46 | | | | | | OSC32_IN |
-#define PC15 47 // | 47 | | | | | | OSC32_OUT |
-// |---------|------------|------------|-----------------------|----------------------|-----------------------------------|-----------|
-#define PD0 48 // | 48 | | | | | | |
-#define PD1 49 // | 49 | | | | | | |
-#define PD2 50 // | 50 | | | UART5_RX | | | |
-#define PD3 51 // | 51 | | | | | | |
-#define PD4 52 // | 52 | | | | | | |
-#define PD5 53 // | 53 | | | USART2_TX | | | |
-#define PD6 54 // | 54 | | | USART2_RX | | | |
-#define PD7 55 // | 55 | | | | | | |
-#define PD8 56 // | 56 | | | USART3_TX | | | |
-#define PD9 57 // | 57 | | | USART3_RX | | | |
-#define PD10 58 // | 58 | | | | | | |
-#define PD11 59 // | 59 | | | | | | |
-#define PD12 60 // | 60 | | | | | | |
-#define PD13 61 // | 61 | | | | | | |
-#define PD14 62 // | 62 | | | | | | |
-#define PD15 63 // | 63 | | | | | | |
-// |---------|------------|------------|-----------------------|----------------------|-----------------------------------|-----------|
-#define PE0 64 // | 64 | | | | | | |
-#define PE1 65 // | 65 | | | | | | |
-#define PE2 66 // | 66 | | | | | | |
-#define PE3 67 // | 67 | | | | | | |
-#define PE4 68 // | 68 | | | | | | |
-#define PE5 69 // | 69 | | | | | | |
-#define PE6 70 // | 70 | | | | | | |
-#define PE7 71 // | 71 | | | | | | |
-#define PE8 72 // | 72 | | | | | | |
-#define PE9 73 // | 73 | | | | | | |
-#define PE10 74 // | 74 | | | | | | |
-#define PE11 75 // | 75 | | | | | | |
-#define PE12 76 // | 76 | | | | | | |
-#define PE13 77 // | 77 | | | | | | |
-#define PE14 78 // | 78 | | | | | | |
-#define PE15 79 // | 79 | | | | | | |
-// |---------|------------|------------|-----------------------|----------------------|-----------------------------------|-----------|
-#define PH0 80 // | 80 | | | | | | OSC_IN |
-#define PH1 81 // | 81 | | | | | | OSC_OUT |
-// |---------|------------|------------|-----------------------|----------------------|-----------------------------------|-----------|
-
-/// This must be a literal
+ // | DIGITAL | ANALOG IN | ANALOG OUT | UART/USART | TWI | SPI | SPECIAL |
+ // |---------|------------|------------|-----------------------|----------------------|-----------------------------------|-----------|
+#define PA0 PIN_A0 // | 0 | A0 (ADC1) | | UART4_TX | | | |
+#define PA1 PIN_A1 // | 1 | A1 (ADC1) | | UART4_RX | | | |
+#define PA2 PIN_A2 // | 2 | A2 (ADC1) | | USART2_TX | | | |
+#define PA3 PIN_A3 // | 3 | A3 (ADC1) | | USART2_RX | | | |
+#define PA4 PIN_A4 // | 4 | A4 (ADC1) | DAC_OUT1 | | | SPI1_SS, (SPI3_SS) | |
+#define PA5 PIN_A5 // | 5 | A5 (ADC1) | DAC_OUT2 | | | SPI1_SCK | |
+#define PA6 PIN_A6 // | 6 | A6 (ADC1) | | | | SPI1_MISO | |
+#define PA7 PIN_A7 // | 7 | A7 (ADC1) | | | | SPI1_MOSI | |
+#define PA8 8 // | 8 | | | | TWI3_SCL | | |
+#define PA9 9 // | 9 | | | USART1_TX | | | |
+#define PA10 10 // | 10 | | | USART1_RX | | | |
+#define PA11 11 // | 11 | | | | | | |
+#define PA12 12 // | 12 | | | | | | |
+#define PA13 13 // | 13 | | | | | | SWD_SWDIO |
+#define PA14 14 // | 14 | | | | | | SWD_SWCLK |
+#define PA15 15 // | 15 | | | | | SPI3_SS, (SPI1_SS) | |
+ // |---------|------------|------------|-----------------------|----------------------|-----------------------------------|-----------|
+#define PB0 PIN_A8 // | 16 | A8 (ADC1) | | | | | |
+#define PB1 PIN_A9 // | 17 | A9 (ADC1) | | | | | |
+#define PB2 18 // | 18 | | | | | | BOOT1 |
+#define PB3 19 // | 19 | | | | | SPI3_SCK, (SPI1_SCK) | |
+#define PB4 20 // | 20 | | | | | SPI3_MISO, (SPI1_MISO) | |
+#define PB5 21 // | 21 | | | | | SPI3_MOSI, (SPI1_MOSI) | |
+#define PB6 22 // | 22 | | | USART1_TX | TWI1_SCL | | |
+#define PB7 23 // | 23 | | | USART1_RX | TWI1_SDA | | |
+#define PB8 24 // | 24 | | | | TWI1_SCL | | |
+#define PB9 25 // | 25 | | | | TWI1_SDA | SPI2_SS | |
+#define PB10 26 // | 26 | | | USART3_TX, (UART4_TX) | TWI2_SCL | SPI2_SCK | |
+#define PB11 27 // | 27 | | | USART3_RX | TWI2_SDA | | |
+#define PB12 28 // | 28 | | | | | SPI2_SS | |
+#define PB13 29 // | 29 | | | | | SPI2_SCK | |
+#define PB14 30 // | 30 | | | | | SPI2_MISO | |
+#define PB15 31 // | 31 | | | | | SPI2_MOSI | |
+ // |---------|------------|------------|-----------------------|----------------------|-----------------------------------|-----------|
+#define PC0 PIN_A10 // | 32 | A10 (ADC1) | | | | | |
+#define PC1 PIN_A11 // | 33 | A11 (ADC1) | | | | | |
+#define PC2 PIN_A12 // | 34 | A12 (ADC1) | | | | SPI2_MISO | |
+#define PC3 PIN_A13 // | 35 | A13 (ADC1) | | | | SPI2_MOSI | |
+#define PC4 PIN_A14 // | 36 | A14 (ADC1) | | | | | |
+#define PC5 PIN_A15 // | 37 | A15 (ADC1) | | USART3_RX | | | |
+#define PC6 38 // | 38 | | | USART6_TX | | | |
+#define PC7 39 // | 39 | | | USART6_RX | | | |
+#define PC8 40 // | 40 | | | | | | |
+#define PC9 41 // | 41 | | | USART3_TX | TWI3_SDA | | |
+#define PC10 42 // | 42 | | | | | SPI3_SCK | |
+#define PC11 43 // | 43 | | | USART3_RX, (UART4_RX) | | SPI3_MISO | |
+#define PC12 44 // | 44 | | | UART5_TX | | SPI3_MOSI | |
+#define PC13 45 // | 45 | | | | | | |
+#define PC14 46 // | 46 | | | | | | OSC32_IN |
+#define PC15 47 // | 47 | | | | | | OSC32_OUT |
+ // |---------|------------|------------|-----------------------|----------------------|-----------------------------------|-----------|
+#define PD0 48 // | 48 | | | | | | |
+#define PD1 49 // | 49 | | | | | | |
+#define PD2 50 // | 50 | | | UART5_RX | | | |
+#define PD3 51 // | 51 | | | | | | |
+#define PD4 52 // | 52 | | | | | | |
+#define PD5 53 // | 53 | | | USART2_TX | | | |
+#define PD6 54 // | 54 | | | USART2_RX | | | |
+#define PD7 55 // | 55 | | | | | | |
+#define PD8 56 // | 56 | | | USART3_TX | | | |
+#define PD9 57 // | 57 | | | USART3_RX | | | |
+#define PD10 58 // | 58 | | | | | | |
+#define PD11 59 // | 59 | | | | | | |
+#define PD12 60 // | 60 | | | | | | |
+#define PD13 61 // | 61 | | | | | | |
+#define PD14 62 // | 62 | | | | | | |
+#define PD15 63 // | 63 | | | | | | |
+ // |---------|------------|------------|-----------------------|----------------------|-----------------------------------|-----------|
+#define PE0 64 // | 64 | | | | | | |
+#define PE1 65 // | 65 | | | | | | |
+#define PE2 66 // | 66 | | | | | | |
+#define PE3 67 // | 67 | | | | | | |
+#define PE4 68 // | 68 | | | | | | |
+#define PE5 69 // | 69 | | | | | | |
+#define PE6 70 // | 70 | | | | | | |
+#define PE7 71 // | 71 | | | | | | |
+#define PE8 72 // | 72 | | | | | | |
+#define PE9 73 // | 73 | | | | | | |
+#define PE10 74 // | 74 | | | | | | |
+#define PE11 75 // | 75 | | | | | | |
+#define PE12 76 // | 76 | | | | | | |
+#define PE13 77 // | 77 | | | | | | |
+#define PE14 78 // | 78 | | | | | | |
+#define PE15 79 // | 79 | | | | | | |
+ // |---------|------------|------------|-----------------------|----------------------|-----------------------------------|-----------|
+#define PH0 80 // | 80 | | | | | | OSC_IN |
+#define PH1 81 // | 81 | | | | | | OSC_OUT |
+ // |---------|------------|------------|-----------------------|----------------------|-----------------------------------|-----------|
+
+// This must be a literal
#define NUM_DIGITAL_PINS 82
#define NUM_ANALOG_INPUTS 16
diff --git a/buildroot/share/PlatformIO/variants/MARLIN_MKS_SKIPR_V1/PeripheralPins.c b/buildroot/share/PlatformIO/variants/MARLIN_MKS_SKIPR_V1/PeripheralPins.c
new file mode 100644
index 000000000000..640fbdbe13c0
--- /dev/null
+++ b/buildroot/share/PlatformIO/variants/MARLIN_MKS_SKIPR_V1/PeripheralPins.c
@@ -0,0 +1,169 @@
+/*
+ *******************************************************************************
+ * Copyright (c) 2016, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "Arduino.h"
+#include "PeripheralPins.h"
+
+// =====
+// Note: Commented lines are alternative possibilities which are not used per default.
+// If you change them, you will have to know what you do
+// =====
+
+//*** ADC ***
+
+#ifdef HAL_ADC_MODULE_ENABLED
+WEAK const PinMap PinMap_ADC[] = {
+ {PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10 THBED
+ {PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11 TH0
+ {PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12 TH1
+ {PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13 TH2
+ {NC, NP, 0}
+};
+#endif
+
+//*** I2C ***
+
+#ifdef HAL_I2C_MODULE_ENABLED
+WEAK const PinMap PinMap_I2C_SDA[] = {
+ {PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {NC, NP, 0}
+};
+
+WEAK const PinMap PinMap_I2C_SCL[] = {
+ {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {NC, NP, 0}
+};
+#endif
+
+//*** PWM ***
+
+#ifdef HAL_TIM_MODULE_ENABLED
+// Some pins can perform PWM from more than one timer. These were selected to utilize as many channels as
+// possible from timers which were already dedicated to PWM output.
+
+// TIM1 = HEATER0, HEATER1, [SERVO]
+// TIM2 = FAN1, FAN2, [BEEPER]
+// TIM4 = HEATER_BED
+// TIM5 = HEATER2, FAN0
+
+WEAK const PinMap PinMap_PWM[] = {
+ {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 Fan2
+ {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 Fan1
+ {PA_2, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3 Fan0
+ {PA_3, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4 HE2
+ {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1 Servo
+ {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N HE1
+ {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N HE0
+ {PB_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 BEEPER
+ {PD_12, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 HOTBED
+ {NC, NP, 0}
+};
+#endif
+
+//*** SERIAL ***
+
+#ifdef HAL_UART_MODULE_ENABLED
+WEAK const PinMap PinMap_UART_TX[] = {
+ {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ {NC, NP, 0}
+};
+
+WEAK const PinMap PinMap_UART_RX[] = {
+ {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ {PB_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ {NC, NP, 0}
+};
+
+WEAK const PinMap PinMap_UART_RTS[] = {
+ {NC, NP, 0}
+};
+
+WEAK const PinMap PinMap_UART_CTS[] = {
+ {NC, NP, 0}
+};
+#endif
+
+//*** SPI ***
+
+#ifdef HAL_SPI_MODULE_ENABLED
+WEAK const PinMap PinMap_SPI_MOSI[] = {
+ {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PC_12, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NP, 0}
+};
+
+WEAK const PinMap PinMap_SPI_MISO[] = {
+ {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PC_11, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NP, 0}
+};
+
+WEAK const PinMap PinMap_SPI_SCLK[] = {
+ {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {PC_10, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ {NC, NP, 0}
+};
+
+WEAK const PinMap PinMap_SPI_SSEL[] = {
+ {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {NC, NP, 0}
+};
+#endif
+
+//*** CAN ***
+
+#ifdef HAL_CAN_MODULE_ENABLED
+WEAK const PinMap PinMap_CAN_RD[] = {
+ {PB_12, CAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)},
+ {NC, NP, 0}
+};
+
+const PinMap PinMap_CAN_TD[] = {
+ {PB_13, CAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)},
+ {NC, NP, 0}
+};
+#endif
+
+//*** USB ***
+
+// If anyone for some unfathomable reason want to run gcode from Marlin's USB-C drive at 12Mbps - you can
+#ifdef HAL_PCD_MODULE_ENABLED
+WEAK const PinMap PinMap_USB_OTG_FS[] = {
+ {PA_11, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DM
+ {PA_12, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DP
+ {NC, NP, 0}
+};
+
+WEAK const PinMap PinMap_USB_OTG_HS[] = {
+ {NC, NP, 0}
+};
+#endif
+
+
diff --git a/buildroot/share/PlatformIO/variants/MARLIN_MKS_SKIPR_V1/PinNamesVar.h b/buildroot/share/PlatformIO/variants/MARLIN_MKS_SKIPR_V1/PinNamesVar.h
new file mode 100644
index 000000000000..bff3f2134987
--- /dev/null
+++ b/buildroot/share/PlatformIO/variants/MARLIN_MKS_SKIPR_V1/PinNamesVar.h
@@ -0,0 +1,30 @@
+/* SYS_WKUP */
+#ifdef PWR_WAKEUP_PIN1
+ SYS_WKUP1 = PA_0, /* SYS_WKUP0 */
+#endif
+#ifdef PWR_WAKEUP_PIN2
+ SYS_WKUP2 = NC,
+#endif
+#ifdef PWR_WAKEUP_PIN3
+ SYS_WKUP3 = NC,
+#endif
+#ifdef PWR_WAKEUP_PIN4
+ SYS_WKUP4 = NC,
+#endif
+#ifdef PWR_WAKEUP_PIN5
+ SYS_WKUP5 = NC,
+#endif
+#ifdef PWR_WAKEUP_PIN6
+ SYS_WKUP6 = NC,
+#endif
+#ifdef PWR_WAKEUP_PIN7
+ SYS_WKUP7 = NC,
+#endif
+#ifdef PWR_WAKEUP_PIN8
+ SYS_WKUP8 = NC,
+#endif
+/* USB */
+#ifdef USBCON
+ USB_OTG_FS_DM = PA_11,
+ USB_OTG_FS_DP = PA_12,
+#endif
diff --git a/buildroot/share/PlatformIO/variants/MARLIN_MKS_SKIPR_V1/hal_conf_extra.h b/buildroot/share/PlatformIO/variants/MARLIN_MKS_SKIPR_V1/hal_conf_extra.h
new file mode 100644
index 000000000000..599c78ce5c49
--- /dev/null
+++ b/buildroot/share/PlatformIO/variants/MARLIN_MKS_SKIPR_V1/hal_conf_extra.h
@@ -0,0 +1,496 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_conf_template.h
+ * @author MCD Application Team
+ * @brief HAL configuration template file.
+ * This file should be copied to the application folder and renamed
+ * to stm32f4xx_hal_conf.h.
+ ******************************************************************************
+ * @attention
+ *
+ * © Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CONF_H
+#define __STM32F4xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+ * @brief This is the list of modules to be used in the HAL driver
+ */
+#define HAL_MODULE_ENABLED
+#define HAL_ADC_MODULE_ENABLED
+#define HAL_CAN_LEGACY_MODULE_ENABLED
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_DAC_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED // Needed for Endstop (and other external) Interrupts
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+// #define HAL_UART_MODULE_ENABLED
+// #define HAL_PCD_MODULE_ENABLED
+
+// #define HAL_CAN_MODULE_ENABLED
+//#define HAL_CEC_MODULE_ENABLED
+//#define HAL_CRYP_MODULE_ENABLED
+//#define HAL_DCMI_MODULE_ENABLED
+//#define HAL_DMA2D_MODULE_ENABLED
+//#define HAL_ETH_MODULE_ENABLED
+//#define HAL_FLASH_MODULE_ENABLED
+//#define HAL_NAND_MODULE_ENABLED
+//#define HAL_NOR_MODULE_ENABLED
+//#define HAL_PCCARD_MODULE_ENABLED
+//#define HAL_SRAM_MODULE_ENABLED
+//#define HAL_SDRAM_MODULE_ENABLED
+//#define HAL_HASH_MODULE_ENABLED
+//#define HAL_SMBUS_MODULE_ENABLED
+//#define HAL_I2S_MODULE_ENABLED
+//#define HAL_IWDG_MODULE_ENABLED
+//#define HAL_LTDC_MODULE_ENABLED
+//#define HAL_DSI_MODULE_ENABLED
+//#define HAL_QSPI_MODULE_ENABLED
+//#define HAL_RNG_MODULE_ENABLED
+//#define HAL_RTC_MODULE_ENABLED
+//#define HAL_SAI_MODULE_ENABLED
+//#define HAL_SD_MODULE_ENABLED
+//#define HAL_IRDA_MODULE_ENABLED
+//#define HAL_SMARTCARD_MODULE_ENABLED
+//#define HAL_WWDG_MODULE_ENABLED
+//#define HAL_HCD_MODULE_ENABLED
+//#define HAL_FMPI2C_MODULE_ENABLED
+//#define HAL_SPDIFRX_MODULE_ENABLED
+//#define HAL_DFSDM_MODULE_ENABLED
+//#define HAL_LPTIM_MODULE_ENABLED
+//#define HAL_MMC_MODULE_ENABLED
+
+/* ########################## HSE/HSI Values adaptation ##################### */
+/**
+ * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSE is used as system clock source, directly or through the PLL).
+ */
+#ifndef HSE_VALUE
+ #define HSE_VALUE 25000000U /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#ifndef HSE_STARTUP_TIMEOUT
+ #define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief Internal High Speed oscillator (HSI) value.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSI is used as system clock source, directly or through the PLL).
+ */
+#ifndef HSI_VALUE
+ #define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz */
+#endif /* HSI_VALUE */
+
+/**
+ * @brief Internal Low Speed oscillator (LSI) value.
+ */
+#ifndef LSI_VALUE
+ #define LSI_VALUE 32000U /*!< LSI Typical Value in Hz */
+#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
+ The real value may vary depending on the variations
+ in voltage and temperature. */
+/**
+ * @brief External Low Speed oscillator (LSE) value.
+ */
+#ifndef LSE_VALUE
+ #define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+#ifndef LSE_STARTUP_TIMEOUT
+ #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief External clock source for I2S peripheral
+ * This value is used by the I2S HAL module to compute the I2S clock source
+ * frequency, this source is inserted directly through I2S_CKIN pad.
+ */
+#ifndef EXTERNAL_CLOCK_VALUE
+ #define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the External oscillator in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+ === you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+ * @brief This is the HAL system configuration section
+ */
+#define VDD_VALUE 3300U /*!< Value of VDD in mv */
+#define TICK_INT_PRIORITY 0x0FU /*!< tick interrupt priority */
+#define USE_RTOS 0U
+#define PREFETCH_ENABLE 1U
+#define INSTRUCTION_CACHE_ENABLE 1U
+#define DATA_CACHE_ENABLE 1U
+
+#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */
+#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */
+#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */
+#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */
+#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */
+#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */
+#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */
+#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */
+#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */
+#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */
+#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */
+#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */
+#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */
+#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */
+#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */
+#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */
+#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */
+#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */
+#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */
+#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */
+#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */
+#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */
+#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */
+#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */
+#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */
+#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */
+#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */
+#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */
+#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */
+#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */
+#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */
+#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */
+#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */
+#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */
+#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */
+#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */
+#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */
+#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */
+
+/* ########################## Assert Selection ############################## */
+/**
+ * @brief Uncomment the line below to expanse the "assert_param" macro in the
+ * HAL drivers code
+ */
+// #define USE_FULL_ASSERT 1U
+
+/* ################## Ethernet peripheral configuration ##################### */
+
+/* Section 1 : Ethernet peripheral configuration */
+
+/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
+#define MAC_ADDR0 2U
+#define MAC_ADDR1 0U
+#define MAC_ADDR2 0U
+#define MAC_ADDR3 0U
+#define MAC_ADDR4 0U
+#define MAC_ADDR5 0U
+
+/* Definition of the Ethernet driver buffers size and count */
+#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
+#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
+#define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
+#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
+
+/* Section 2: PHY configuration section */
+
+/* DP83848 PHY Address*/
+#define DP83848_PHY_ADDRESS 0x01U
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
+#define PHY_RESET_DELAY 0x000000FFU
+/* PHY Configuration delay */
+#define PHY_CONFIG_DELAY 0x00000FFFU
+
+#define PHY_READ_TO 0x0000FFFFU
+#define PHY_WRITE_TO 0x0000FFFFU
+
+/* Section 3: Common PHY Registers */
+
+#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */
+#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */
+
+#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */
+#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */
+#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */
+#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */
+#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */
+#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */
+#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */
+#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */
+#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */
+#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */
+
+#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */
+#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */
+#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */
+
+/* Section 4: Extended PHY Registers */
+
+#define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */
+#define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */
+#define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */
+
+#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */
+#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */
+#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */
+
+#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */
+#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */
+
+#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */
+#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */
+
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+* Activated: CRC code is present inside driver
+* Deactivated: CRC code cleaned from driver
+*/
+
+#define USE_SPI_CRC 0U
+
+/* Includes ------------------------------------------------------------------*/
+/**
+ * @brief Include module's header file
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+ #include "stm32f4xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+ #include "stm32f4xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+ #include "stm32f4xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+ #include "stm32f4xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+ #include "stm32f4xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+ #include "stm32f4xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+ #include "stm32f4xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
+ #include "stm32f4xx_hal_can_legacy.h"
+#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+ #include "stm32f4xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+ #include "stm32f4xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DMA2D_MODULE_ENABLED
+ #include "stm32f4xx_hal_dma2d.h"
+#endif /* HAL_DMA2D_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+ #include "stm32f4xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+ #include "stm32f4xx_hal_dcmi.h"
+#endif /* HAL_DCMI_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+ #include "stm32f4xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+ #include "stm32f4xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+ #include "stm32f4xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+ #include "stm32f4xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+ #include "stm32f4xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_PCCARD_MODULE_ENABLED
+ #include "stm32f4xx_hal_pccard.h"
+#endif /* HAL_PCCARD_MODULE_ENABLED */
+
+#ifdef HAL_SDRAM_MODULE_ENABLED
+ #include "stm32f4xx_hal_sdram.h"
+#endif /* HAL_SDRAM_MODULE_ENABLED */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+ #include "stm32f4xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32f4xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32f4xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32f4xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32f4xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+ #include "stm32f4xx_hal_ltdc.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32f4xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+ #include "stm32f4xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32f4xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+ #include "stm32f4xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+ #include "stm32f4xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32f4xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32f4xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32f4xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32f4xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32f4xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32f4xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32f4xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f4xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+ #include "stm32f4xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
+#ifdef HAL_DSI_MODULE_ENABLED
+ #include "stm32f4xx_hal_dsi.h"
+#endif /* HAL_DSI_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+ #include "stm32f4xx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+ #include "stm32f4xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_FMPI2C_MODULE_ENABLED
+ #include "stm32f4xx_hal_fmpi2c.h"
+#endif /* HAL_FMPI2C_MODULE_ENABLED */
+
+#ifdef HAL_SPDIFRX_MODULE_ENABLED
+ #include "stm32f4xx_hal_spdifrx.h"
+#endif /* HAL_SPDIFRX_MODULE_ENABLED */
+
+#ifdef HAL_DFSDM_MODULE_ENABLED
+ #include "stm32f4xx_hal_dfsdm.h"
+#endif /* HAL_DFSDM_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+ #include "stm32f4xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_MMC_MODULE_ENABLED
+ #include "stm32f4xx_hal_mmc.h"
+#endif /* HAL_MMC_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef USE_FULL_ASSERT
+/**
+ * @brief The assert_param macro is used for function's parameters check.
+ * @param expr If expr is false, it calls assert_failed function
+ * which reports the name of the source file and the source
+ * line number of the call that failed.
+ * If expr is true, it returns no value.
+ * @retval None
+ */
+ #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+ void assert_failed(uint8_t *file, uint32_t line);
+#else
+ #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CONF_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
\ No newline at end of file
diff --git a/buildroot/share/PlatformIO/variants/MARLIN_MKS_SKIPR_V1/ldscript.ld b/buildroot/share/PlatformIO/variants/MARLIN_MKS_SKIPR_V1/ldscript.ld
new file mode 100644
index 000000000000..8b38135a2a51
--- /dev/null
+++ b/buildroot/share/PlatformIO/variants/MARLIN_MKS_SKIPR_V1/ldscript.ld
@@ -0,0 +1,203 @@
+/*
+******************************************************************************
+**
+** File : LinkerScript.ld
+**
+** Abstract : Linker script for STM32F4x7Vx Device with
+** 512/1024KByte FLASH, 192KByte RAM
+**
+** Set heap size, stack size and stack location according
+** to application requirements.
+**
+** Set memory bank area and size if external memory is used.
+**
+** Target : STMicroelectronics STM32
+**
+** Distribution: The file is distributed “as is,” without any warranty
+** of any kind.
+**
+*****************************************************************************
+** @attention
+**
+** © COPYRIGHT(c) 2019 STMicroelectronics
+**
+** Redistribution and use in source and binary forms, with or without modification,
+** are permitted provided that the following conditions are met:
+** 1. Redistributions of source code must retain the above copyright notice,
+** this list of conditions and the following disclaimer.
+** 2. Redistributions in binary form must reproduce the above copyright notice,
+** this list of conditions and the following disclaimer in the documentation
+** and/or other materials provided with the distribution.
+** 3. Neither the name of STMicroelectronics nor the names of its contributors
+** may be used to endorse or promote products derived from this software
+** without specific prior written permission.
+**
+** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+**
+*****************************************************************************
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = 0x20000000 + LD_MAX_DATA_SIZE; /* end of RAM */
+/* Generate a link error if heap and stack don't fit into RAM */
+_Min_Heap_Size = 0x200; /* required amount of heap */
+_Min_Stack_Size = 0x400; /* required amount of stack */
+
+/* Specify the memory areas */
+MEMORY
+{
+RAM (xrw) : ORIGIN = 0x20000000, LENGTH = LD_MAX_DATA_SIZE
+CCMRAM (rw) : ORIGIN = 0x10000000, LENGTH = 64K
+FLASH (rx) : ORIGIN = 0x08000000 + LD_FLASH_OFFSET, LENGTH = LD_MAX_SIZE - LD_FLASH_OFFSET
+}
+
+/* Define output sections */
+SECTIONS
+{
+ /* The startup code goes first into FLASH */
+ .isr_vector :
+ {
+ . = ALIGN(4);
+ KEEP(*(.isr_vector)) /* Startup code */
+ . = ALIGN(4);
+ } >FLASH
+
+ /* The program code and other data goes into FLASH */
+ .text :
+ {
+ . = ALIGN(4);
+ *(.text) /* .text sections (code) */
+ *(.text*) /* .text* sections (code) */
+ *(.glue_7) /* glue arm to thumb code */
+ *(.glue_7t) /* glue thumb to arm code */
+ *(.eh_frame)
+
+ KEEP (*(.init))
+ KEEP (*(.fini))
+
+ . = ALIGN(4);
+ _etext = .; /* define a global symbols at end of code */
+ } >FLASH
+
+ /* Constant data goes into FLASH */
+ .rodata :
+ {
+ . = ALIGN(4);
+ *(.rodata) /* .rodata sections (constants, strings, etc.) */
+ *(.rodata*) /* .rodata* sections (constants, strings, etc.) */
+ . = ALIGN(4);
+ } >FLASH
+
+ .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
+ .ARM : {
+ __exidx_start = .;
+ *(.ARM.exidx*)
+ __exidx_end = .;
+ } >FLASH
+
+ .preinit_array :
+ {
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP (*(.preinit_array*))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+ } >FLASH
+ .init_array :
+ {
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP (*(SORT(.init_array.*)))
+ KEEP (*(.init_array*))
+ PROVIDE_HIDDEN (__init_array_end = .);
+ } >FLASH
+ .fini_array :
+ {
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP (*(SORT(.fini_array.*)))
+ KEEP (*(.fini_array*))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+ } >FLASH
+
+ /* used by the startup to initialize data */
+ _sidata = LOADADDR(.data);
+
+ /* Initialized data sections goes into RAM, load LMA copy after code */
+ .data :
+ {
+ . = ALIGN(4);
+ _sdata = .; /* create a global symbol at data start */
+ *(.data) /* .data sections */
+ *(.data*) /* .data* sections */
+
+ . = ALIGN(4);
+ _edata = .; /* define a global symbol at data end */
+ } >RAM AT> FLASH
+
+ _siccmram = LOADADDR(.ccmram);
+
+ /* CCM-RAM section
+ *
+ * IMPORTANT NOTE!
+ * If initialized variables will be placed in this section,
+ * the startup code needs to be modified to copy the init-values.
+ */
+ .ccmram :
+ {
+ . = ALIGN(4);
+ _sccmram = .; /* create a global symbol at ccmram start */
+ *(.ccmram)
+ *(.ccmram*)
+
+ . = ALIGN(4);
+ _eccmram = .; /* create a global symbol at ccmram end */
+ } >CCMRAM AT> FLASH
+
+
+ /* Uninitialized data section */
+ . = ALIGN(4);
+ .bss :
+ {
+ /* This is used by the startup in order to initialize the .bss section */
+ _sbss = .; /* define a global symbol at bss start */
+ __bss_start__ = _sbss;
+ *(.bss)
+ *(.bss*)
+ *(COMMON)
+
+ . = ALIGN(4);
+ _ebss = .; /* define a global symbol at bss end */
+ __bss_end__ = _ebss;
+ } >RAM
+
+ /* User_heap_stack section, used to check that there is enough RAM left */
+ ._user_heap_stack :
+ {
+ . = ALIGN(8);
+ PROVIDE ( end = . );
+ PROVIDE ( _end = . );
+ . = . + _Min_Heap_Size;
+ . = . + _Min_Stack_Size;
+ . = ALIGN(8);
+ } >RAM
+
+
+ /* Remove information from the standard libraries */
+ /DISCARD/ :
+ {
+ libc.a ( * )
+ libm.a ( * )
+ libgcc.a ( * )
+ }
+
+ .ARM.attributes 0 : { *(.ARM.attributes) }
+}
diff --git a/buildroot/share/PlatformIO/variants/MARLIN_MKS_SKIPR_V1/variant.cpp b/buildroot/share/PlatformIO/variants/MARLIN_MKS_SKIPR_V1/variant.cpp
new file mode 100644
index 000000000000..00c7a90db313
--- /dev/null
+++ b/buildroot/share/PlatformIO/variants/MARLIN_MKS_SKIPR_V1/variant.cpp
@@ -0,0 +1,288 @@
+/*
+ *******************************************************************************
+ * Copyright (c) 2017, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#include "pins_arduino.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+// Digital PinName array
+const PinName digitalPin[] = {
+ PA_0, // Digital pin 0
+ PA_1, // Digital pin 1
+ PA_2, // Digital pin 2
+ PA_3, // Digital pin 3
+ PA_4, // Digital pin 4
+ PA_5, // Digital pin 5
+ PA_6, // Digital pin 6
+ PA_7, // Digital pin 7
+ PA_8, // Digital pin 8
+ PA_9, // Digital pin 9
+ PA_10, // Digital pin 10
+ PA_11, // Digital pin 11
+ PA_12, // Digital pin 12
+ PA_13, // Digital pin 13
+ PA_14, // Digital pin 14
+ PA_15, // Digital pin 15
+
+ PB_0, // Digital pin 16
+ PB_1, // Digital pin 17
+ PB_2, // Digital pin 18
+ PB_3, // Digital pin 19
+ PB_4, // Digital pin 20
+ PB_5, // Digital pin 21
+ PB_6, // Digital pin 22
+ PB_7, // Digital pin 23
+ PB_8, // Digital pin 24
+ PB_9, // Digital pin 25
+ PB_10, // Digital pin 26
+ PB_11, // Digital pin 27
+ PB_12, // Digital pin 28
+ PB_13, // Digital pin 29
+ PB_14, // Digital pin 30
+ PB_15, // Digital pin 31
+
+ PC_0, // Digital pin 32
+ PC_1, // Digital pin 33
+ PC_2, // Digital pin 34
+ PC_3, // Digital pin 35
+ PC_4, // Digital pin 36
+ PC_5, // Digital pin 37
+ PC_6, // Digital pin 38
+ PC_7, // Digital pin 39
+ PC_8, // Digital pin 40
+ PC_9, // Digital pin 41
+ PC_10, // Digital pin 42
+ PC_11, // Digital pin 43
+ PC_12, // Digital pin 44
+ PC_13, // Digital pin 45
+ PC_14, // Digital pin 46
+ PC_15, // Digital pin 47
+
+ PD_0, // Digital pin 48
+ PD_1, // Digital pin 49
+ PD_2, // Digital pin 50
+ PD_3, // Digital pin 51
+ PD_4, // Digital pin 52
+ PD_5, // Digital pin 53
+ PD_6, // Digital pin 54
+ PD_7, // Digital pin 55
+ PD_8, // Digital pin 56
+ PD_9, // Digital pin 57
+ PD_10, // Digital pin 58
+ PD_11, // Digital pin 59
+ PD_12, // Digital pin 60
+ PD_13, // Digital pin 61
+ PD_14, // Digital pin 62
+ PD_15, // Digital pin 63
+
+ PE_0, // Digital pin 64
+ PE_1, // Digital pin 65
+ PE_2, // Digital pin 66
+ PE_3, // Digital pin 67
+ PE_4, // Digital pin 68
+ PE_5, // Digital pin 69
+ PE_6, // Digital pin 70
+ PE_7, // Digital pin 71
+ PE_8, // Digital pin 72
+ PE_9, // Digital pin 73
+ PE_10, // Digital pin 74
+ PE_11, // Digital pin 75
+ PE_12, // Digital pin 76
+ PE_13, // Digital pin 77
+ PE_14, // Digital pin 78
+ PE_15, // Digital pin 79
+
+ PH_0, // Digital pin 80, used by the external oscillator
+ PH_1 // Digital pin 81, used by the external oscillator
+};
+
+// Analog (Ax) pin number array
+const uint32_t analogInputPin[] = {
+ 0, // A0, PA0
+ 1, // A1, PA1
+ 2, // A2, PA2
+ 3, // A3, PA3
+ 4, // A4, PA4
+ 5, // A5, PA5
+ 6, // A6, PA6
+ 7, // A7, PA7
+ 16, // A8, PB0
+ 17, // A9, PB1
+ 32, // A10, PC0
+ 33, // A11, PC1
+ 34, // A12, PC2
+ 35, // A13, PC3
+ 36, // A14, PC4
+ 37 // A15, PC5
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+// ----------------------------------------------------------------------------
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * @brief Configures the System clock source, PLL Multiplier and Divider factors,
+ * AHB/APBx prescalers and Flash settings
+ * @note This function should be called only once the RCC clock configuration
+ * is reset to the default reset state (done in SystemInit() function).
+ * @param None
+ * @retval None
+ */
+
+/******************************************************************************/
+/* PLL (clocked by HSE) used as System clock source */
+/******************************************************************************/
+static uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
+{
+ RCC_OscInitTypeDef RCC_OscInitStruct;
+ RCC_ClkInitTypeDef RCC_ClkInitStruct;
+
+ /* The voltage scaling allows optimizing the power consumption when the device is
+ clocked below the maximum system frequency, to update the voltage scaling value
+ regarding system frequency refer to product datasheet. */
+ __HAL_RCC_PWR_CLK_ENABLE();
+ __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
+
+ // Enable HSE oscillator and activate PLL with HSE as source
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
+ if (bypass == 0) {
+ RCC_OscInitStruct.HSEState = RCC_HSE_ON; // External 8 MHz xtal on OSC_IN/OSC_OUT
+ } else {
+ RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; // External 8 MHz clock on OSC_IN
+ }
+
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+ RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+ RCC_OscInitStruct.PLL.PLLM = HSE_VALUE / 1000000L; // Expects an 8 MHz external clock by default. Redefine HSE_VALUE if not
+ RCC_OscInitStruct.PLL.PLLN = 336; // VCO output clock = 336 MHz (1 MHz * 336)
+ RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; // PLLCLK = 168 MHz (336 MHz / 2)
+ RCC_OscInitStruct.PLL.PLLQ = 7;
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
+ return 0; // FAIL
+ }
+
+ // Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers
+ RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
+ RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+ RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 168 MHz
+ RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; // 42 MHz
+ RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; // 84 MHz
+ if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK) {
+ return 0; // FAIL
+ }
+
+ /* Output clock on MCO1 pin(PA8) for debugging purpose */
+ /*
+ if (bypass == 0)
+ HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_2); // 4 MHz
+ else
+ HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_1); // 8 MHz
+ */
+
+ return 1; // OK
+}
+
+/******************************************************************************/
+/* PLL (clocked by HSI) used as System clock source */
+/******************************************************************************/
+uint8_t SetSysClock_PLL_HSI(void)
+{
+ RCC_OscInitTypeDef RCC_OscInitStruct;
+ RCC_ClkInitTypeDef RCC_ClkInitStruct;
+
+ /* The voltage scaling allows optimizing the power consumption when the device is
+ clocked below the maximum system frequency, to update the voltage scaling value
+ regarding system frequency refer to product datasheet. */
+ __HAL_RCC_PWR_CLK_ENABLE();
+ __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
+
+ // Enable HSI oscillator and activate PLL with HSI as source
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
+ RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+ RCC_OscInitStruct.HSEState = RCC_HSE_OFF;
+ RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+ RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
+ RCC_OscInitStruct.PLL.PLLM = 16; // VCO input clock = 1 MHz (16 MHz / 16)
+ RCC_OscInitStruct.PLL.PLLN = 336; // VCO output clock = 336 MHz (1 MHz * 336)
+ RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; // PLLCLK = 168 MHz (336 MHz / 2)
+ RCC_OscInitStruct.PLL.PLLQ = 7;
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
+ return 0; // FAIL
+ }
+
+ /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */
+ RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
+ RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+ RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 168 MHz
+ RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; // 42 MHz
+ RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; // 84 MHz
+ if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK) {
+ return 0; // FAIL
+ }
+
+ /* Output clock on MCO1 pin(PA8) for debugging purpose */
+ //HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSI, RCC_MCODIV_1); // 16 MHz
+
+ return 1; // OK
+}
+
+WEAK void SystemClock_Config(void)
+{
+ /* 1- If fail try to start with HSE and external xtal */
+ if (SetSysClock_PLL_HSE(0) == 0) {
+ /* 2- Try to start with HSE and external clock */
+ if (SetSysClock_PLL_HSE(1) == 0) {
+ /* 3- If fail start with HSI clock */
+ if (SetSysClock_PLL_HSI() == 0) {
+ Error_Handler();
+ }
+ }
+ }
+
+ /* Ensure CCM RAM clock is enabled */
+ __HAL_RCC_CCMDATARAMEN_CLK_ENABLE();
+
+ /* Output clock on MCO2 pin(PC9) for debugging purpose */
+ //HAL_RCC_MCOConfig(RCC_MCO2, RCC_MCO2SOURCE_SYSCLK, RCC_MCODIV_4);
+}
+
+#ifdef __cplusplus
+}
+#endif
diff --git a/buildroot/share/PlatformIO/variants/MARLIN_MKS_SKIPR_V1/variant.h b/buildroot/share/PlatformIO/variants/MARLIN_MKS_SKIPR_V1/variant.h
new file mode 100644
index 000000000000..dcc8c493956c
--- /dev/null
+++ b/buildroot/share/PlatformIO/variants/MARLIN_MKS_SKIPR_V1/variant.h
@@ -0,0 +1,196 @@
+/*
+ *******************************************************************************
+ * Copyright (c) 2017, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#pragma once
+
+#ifdef __cplusplus
+extern "C" {
+#endif // __cplusplus
+//
+/*----------------------------------------------------------------------------
+ * Pins
+ *----------------------------------------------------------------------------*/
+ // | DIGITAL | ANALOG IN | ANALOG OUT | UART/USART | TWI | SPI | SPECIAL |
+ // |---------|------------|------------|-----------------------|----------------------|-----------------------------------|-----------|
+#define PA0 PIN_A0 // | 0 | A0 (ADC1) | | UART4_TX | | | |
+#define PA1 PIN_A1 // | 1 | A1 (ADC1) | | UART4_RX | | | |
+#define PA2 PIN_A2 // | 2 | A2 (ADC1) | | USART2_TX | | | |
+#define PA3 PIN_A3 // | 3 | A3 (ADC1) | | USART2_RX | | | |
+#define PA4 PIN_A4 // | 4 | A4 (ADC1) | DAC_OUT1 | | | SPI1_SS, (SPI3_SS) | |
+#define PA5 PIN_A5 // | 5 | A5 (ADC1) | DAC_OUT2 | | | SPI1_SCK | |
+#define PA6 PIN_A6 // | 6 | A6 (ADC1) | | | | SPI1_MISO | |
+#define PA7 PIN_A7 // | 7 | A7 (ADC1) | | | | SPI1_MOSI | |
+#define PA8 8 // | 8 | | | | TWI3_SCL | | |
+#define PA9 9 // | 9 | | | USART1_TX | | | |
+#define PA10 10 // | 10 | | | USART1_RX | | | |
+#define PA11 11 // | 11 | | | | | | |
+#define PA12 12 // | 12 | | | | | | |
+#define PA13 13 // | 13 | | | | | | SWD_SWDIO |
+#define PA14 14 // | 14 | | | | | | SWD_SWCLK |
+#define PA15 15 // | 15 | | | | | SPI3_SS, (SPI1_SS) | |
+ // |---------|------------|------------|-----------------------|----------------------|-----------------------------------|-----------|
+#define PB0 PIN_A8 // | 16 | A8 (ADC1) | | | | | |
+#define PB1 PIN_A9 // | 17 | A9 (ADC1) | | | | | |
+#define PB2 18 // | 18 | | | | | | BOOT1 |
+#define PB3 19 // | 19 | | | | | SPI3_SCK, (SPI1_SCK) | |
+#define PB4 20 // | 20 | | | | | SPI3_MISO, (SPI1_MISO) | |
+#define PB5 21 // | 21 | | | | | SPI3_MOSI, (SPI1_MOSI) | |
+#define PB6 22 // | 22 | | | USART1_TX | TWI1_SCL | | |
+#define PB7 23 // | 23 | | | USART1_RX | TWI1_SDA | | |
+#define PB8 24 // | 24 | | | | TWI1_SCL | | |
+#define PB9 25 // | 25 | | | | TWI1_SDA | SPI2_SS | |
+#define PB10 26 // | 26 | | | USART3_TX, (UART4_TX) | TWI2_SCL | SPI2_SCK | |
+#define PB11 27 // | 27 | | | USART3_RX | TWI2_SDA | | |
+#define PB12 28 // | 28 | | | | | SPI2_SS | |
+#define PB13 29 // | 29 | | | | | SPI2_SCK | |
+#define PB14 30 // | 30 | | | | | SPI2_MISO | |
+#define PB15 31 // | 31 | | | | | SPI2_MOSI | |
+ // |---------|------------|------------|-----------------------|----------------------|-----------------------------------|-----------|
+#define PC0 PIN_A10 // | 32 | A10 (ADC1) | | | | | |
+#define PC1 PIN_A11 // | 33 | A11 (ADC1) | | | | | |
+#define PC2 PIN_A12 // | 34 | A12 (ADC1) | | | | SPI2_MISO | |
+#define PC3 PIN_A13 // | 35 | A13 (ADC1) | | | | SPI2_MOSI | |
+#define PC4 PIN_A14 // | 36 | A14 (ADC1) | | | | | |
+#define PC5 PIN_A15 // | 37 | A15 (ADC1) | | USART3_RX | | | |
+#define PC6 38 // | 38 | | | USART6_TX | | | |
+#define PC7 39 // | 39 | | | USART6_RX | | | |
+#define PC8 40 // | 40 | | | | | | |
+#define PC9 41 // | 41 | | | USART3_TX | TWI3_SDA | | |
+#define PC10 42 // | 42 | | | | | SPI3_SCK | |
+#define PC11 43 // | 43 | | | USART3_RX, (UART4_RX) | | SPI3_MISO | |
+#define PC12 44 // | 44 | | | UART5_TX | | SPI3_MOSI | |
+#define PC13 45 // | 45 | | | | | | |
+#define PC14 46 // | 46 | | | | | | OSC32_IN |
+#define PC15 47 // | 47 | | | | | | OSC32_OUT |
+ // |---------|------------|------------|-----------------------|----------------------|-----------------------------------|-----------|
+#define PD0 48 // | 48 | | | | | | |
+#define PD1 49 // | 49 | | | | | | |
+#define PD2 50 // | 50 | | | UART5_RX | | | |
+#define PD3 51 // | 51 | | | | | | |
+#define PD4 52 // | 52 | | | | | | |
+#define PD5 53 // | 53 | | | USART2_TX | | | |
+#define PD6 54 // | 54 | | | USART2_RX | | | |
+#define PD7 55 // | 55 | | | | | | |
+#define PD8 56 // | 56 | | | USART3_TX | | | |
+#define PD9 57 // | 57 | | | USART3_RX | | | |
+#define PD10 58 // | 58 | | | | | | |
+#define PD11 59 // | 59 | | | | | | |
+#define PD12 60 // | 60 | | | | | | |
+#define PD13 61 // | 61 | | | | | | |
+#define PD14 62 // | 62 | | | | | | |
+#define PD15 63 // | 63 | | | | | | |
+ // |---------|------------|------------|-----------------------|----------------------|-----------------------------------|-----------|
+#define PE0 64 // | 64 | | | | | | |
+#define PE1 65 // | 65 | | | | | | |
+#define PE2 66 // | 66 | | | | | | |
+#define PE3 67 // | 67 | | | | | | |
+#define PE4 68 // | 68 | | | | | | |
+#define PE5 69 // | 69 | | | | | | |
+#define PE6 70 // | 70 | | | | | | |
+#define PE7 71 // | 71 | | | | | | |
+#define PE8 72 // | 72 | | | | | | |
+#define PE9 73 // | 73 | | | | | | |
+#define PE10 74 // | 74 | | | | | | |
+#define PE11 75 // | 75 | | | | | | |
+#define PE12 76 // | 76 | | | | | | |
+#define PE13 77 // | 77 | | | | | | |
+#define PE14 78 // | 78 | | | | | | |
+#define PE15 79 // | 79 | | | | | | |
+ // |---------|------------|------------|-----------------------|----------------------|-----------------------------------|-----------|
+#define PH0 80 // | 80 | | | | | | OSC_IN |
+#define PH1 81 // | 81 | | | | | | OSC_OUT |
+ // |---------|------------|------------|-----------------------|----------------------|-----------------------------------|-----------|
+
+// This must be a literal
+#define NUM_DIGITAL_PINS 82
+#define NUM_ANALOG_INPUTS 16
+
+// Below SPI and I2C definitions already done in the core
+// Could be redefined here if differs from the default one
+// SPI Definitions
+#define PIN_SPI_SS PC9
+#define PIN_SPI_SCK PC10
+#define PIN_SPI_MISO PC11
+#define PIN_SPI_MOSI PC12
+
+// I2C Definitions
+#define PIN_WIRE_SCL PB8
+#define PIN_WIRE_SDA PB9
+
+// Timer Definitions
+// Do not use timer used by PWM pins when possible. See PinMap_PWM in PeripheralPins.c
+// TIM1 = HEATER0, HEATER1, [SERVO]
+// TIM2 = FAN1, FAN2, [BEEPER]
+// TIM4 = HEATER_BED
+// TIM5 = HEATER2, FAN0
+// Uses default for STM32F4xx STEP_TIMER 6 and TEMP_TIMER 14
+#define TIMER_SERVO TIM1 // TIMER_SERVO must be defined in this file
+#define TIMER_TONE TIM2 // TIMER_TONE must be defined in this file
+#define TIMER_SERIAL TIM3 // TIMER_SERIAL must be defined in this file
+
+// USART1 (direct to RK3328 SoC)
+#define ENABLE_HWSERIAL1
+#define PIN_SERIAL1_TX PA9
+#define PIN_SERIAL1_RX PA10
+
+// USART3 connector
+#define ENABLE_HWSERIAL3
+#define PIN_SERIAL3_TX PB10
+#define PIN_SERIAL3_RX PB11
+
+#ifdef __cplusplus
+} // extern "C"
+#endif
+/*----------------------------------------------------------------------------
+ * Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+
+#ifdef __cplusplus
+// These serial port names are intended to allow libraries and architecture-neutral
+// sketches to automatically default to the correct port name for a particular type
+// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
+// the first hardware serial port whose RX/TX pins are not dedicated to another use.
+//
+// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
+//
+// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
+//
+// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
+//
+// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
+//
+// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
+// pins are NOT connected to anything by default.
+#define SERIAL_PORT_MONITOR Serial1
+#define SERIAL_PORT_USBVIRTUAL SerialUSB
+#define SERIAL_PORT_HARDWARE Serial1
+#define SERIAL_PORT_HARDWARE1 Serial3
+#define SERIAL_PORT_HARDWARE_OPEN Serial1
+#define SERIAL_PORT_HARDWARE_OPEN1 Serial3
+#endif
diff --git a/ini/stm32f4.ini b/ini/stm32f4.ini
index b0d2a5600c3d..471e9e7fb496 100644
--- a/ini/stm32f4.ini
+++ b/ini/stm32f4.ini
@@ -47,7 +47,6 @@ board = marlin_STM32F407ZGT6
board_build.variant = MARLIN_FLY_F407ZG
board_build.offset = 0x8000
upload_protocol = dfu
-
#
# FYSETC S6 (STM32F446RET6 ARM Cortex-M4)
#
@@ -684,3 +683,19 @@ build_flags = ${stm32_variant.build_flags}
-DSTEP_TIMER_IRQ_PRIO=0
upload_protocol = stlink
debug_tool = stlink
+
+#
+# MKS SKIPR v1.0 all-in-one board (STM32F407VE)
+#
+[env:mks_skipr_v1]
+extends = stm32_variant
+board = marlin_MKS_SKIPR_V1
+board_build.rename = mks_skipr.bin
+
+[env:mks_skipr_v1_nobootloader]
+extends = env:mks_skipr_v1
+board_build.rename = firmware.bin
+board_build.offset = 0x0000
+board_upload.offset_address = 0x08000000
+upload_protocol = dfu
+upload_command = dfu-util -a 0 -s 0x08000000:leave -D "$SOURCE"