CombineExt

CombineExt provides a collection of operators, publishers and utilities for Combine, that are not provided by Apple themselves, but are common in other Reactive Frameworks and standards.

The original inspiration for many of these additions came from my journey investigating Combine after years of RxSwift and ReactiveX usage.

All operators, utilities and helpers respect Combine's publisher contract, including backpressure.

Note: This is still a relatively early version of CombineExt, with much more to be desired. I gladly accept PRs, ideas, opinions, or improvements. Thank you! :)

Installation

CocoaPods

Add the following line to your Podfile:

pod 'CombineExt'

Swift Package Manager

Add the following dependency to your Package.swift file:

.package(url: "https://github.com/CombineCommunity/CombineExt.git", from: "1.0.0")

Carthage

Carthage support is offered as a prebuilt binary.

Add the following to your Cartfile:

github "CombineCommunity/CombineExt"

Operators

This section outlines some of the custom operators CombineExt provides.

withLatestFrom

Merges up to four publishers into a single publisher by combining each value from self with the latest value from the other publishers, if any.

let taps = PassthroughSubject<Void, Never>()
let values = CurrentValueSubject<String, Never>("Hello")

taps
  .withLatestFrom(values)
  .sink(receiveValue: { print("withLatestFrom: \($0)") })

taps.send()
taps.send()
values.send("World!")
taps.send()

Output:

withLatestFrom: Hello
withLatestFrom: Hello
withLatestFrom: World!

flatMapLatest

Transforms an output value into a new publisher, and flattens the stream of events from these multiple upstream publishers to appear as if they were coming from a single stream of events.

Mapping to a new publisher will cancel the subscription to the previous one, keeping only a single subscription active along with its event emissions.

Note: flatMapLatest is a combination of map and switchToLatest.

let trigger = PassthroughSubject<Void, Never>()
trigger
    .flatMapLatest { performNetworkRequest() }

trigger.send()
trigger.send() // cancels previous request
trigger.send() // cancels previous request

assign

CombineExt provides custom overloads of assign(to:on:) that let you bind a publisher to multiple keypath targets simultaneously.

var label1: UILabel
var label2: UILabel
var text: UITextField

["hey", "there", "friend"]
    .publisher
    .assign(to: \.text, on: label1,
            and: \.text, on: label2,
            and: \.text, on: text)

CombineExt provides an additional overload — assign(to:on:ownership) — which lets you specify the kind of ownersip you want for your assign operation: strong, weak or unowned.

// Retain `self` strongly
subscription = subject.assign(to: \.value, on: self)
subscription = subject.assign(to: \.value, on: self, ownership: .strong)

// Use a `weak` reference to `self`
subscription = subject.assign(to: \.value, on: self, ownership: .weak)

// Use an `unowned` reference to `self`
subscription = subject.assign(to: \.value, on: self, ownership: .unowned)

amb

Amb takes multiple publishers and mirrors the first one to emit an event. You can think of it as a race of publishers, where the first one to emit passes its events, while the others are ignored (there’s also a Collection.amb method to ease working with multiple publishers).

The name amb comes from the Reactive Extensions operator, also known in RxJS as race.

let subject1 = PassthroughSubject<Int, Never>()
let subject2 = PassthroughSubject<Int, Never>()

subject1
  .amb(subject2)
  .sink(receiveCompletion: { print("amb: completed with \($0)") },
        receiveValue: { print("amb: \($0)") })

subject2.send(3) // Since this subject emit first, it becomes the active publisher
subject1.send(1)
subject2.send(6)
subject1.send(8)
subject1.send(7)

subject1.send(completion: .finished)
// Only when subject2 finishes, amb itself finishes as well, since it's the active publisher
subject2.send(completion: .finished)

Output:

amb: 3
amb: 6
amb: completed with .finished

materialize

Convert any publisher to a publisher of its events. Given a Publisher<Output, MyError>, this operator will return a Publisher<Event<Output, MyError>, Never>, which means your failure will actually be a regular value, which makes error handling much simpler in many use cases.

let values = PassthroughSubject<String, MyError>()
enum MyError: Swift.Error {
  case ohNo
}

values
  .materialize()
  .sink(receiveCompletion: { print("materialized: completed with \($0)") },
        receiveValue: { print("materialized: \($0)") })

values.send("Hello")
values.send("World")
values.send("What's up?")
values.send(completion: .failure(.ohNo))

Output:

materialize: .value("Hello")
materialize: .value("World")
materialize: .value("What's up?")
materialize: .failure(.ohNo)
materialize: completed with .finished

values

Given a materialized publisher, publish only the emitted upstream values, omitting failures. Given a Publisher<Event<String, MyError>, Never>, this operator will return a Publisher<String, Never>.

Note: This operator only works on publishers that were materialized with the materialize() operator.

let values = PassthroughSubject<String, MyError>()
enum MyError: Swift.Error {
  case ohNo
}

values
  .materialize()
  .values()
  .sink(receiveValue: { print("values: \($0)") })

values.send("Hello")
values.send("World")
values.send("What's up?")
values.send(completion: .failure(.ohNo))

Output:

values: "Hello"
values: "World"
values: "What's up?"

failures

Given a materialized publisher, publish only the emitted upstream failure, omitting values. Given a Publisher<Event<String, MyError>, Never>, this operator will return a Publisher<MyError, Never>.

Note: This operator only works on publishers that were materialized with the materialize() operator.

let values = PassthroughSubject<String, MyError>()
enum MyError: Swift.Error {
  case ohNo
}

values
  .materialize()
  .failures()
  .sink(receiveValue: { print("failures: \($0)") })

values.send("Hello")
values.send("World")
values.send("What's up?")
values.send(completion: .failure(.ohNo))

Output:

failure: MyError.ohNo

dematerialize

Converts a previously-materialized publisher into its original form. Given a Publisher<Event<String, MyError>, Never>, this operator will return a Publisher<String, MyError>

Note: This operator only works on publishers that were materialized with the materialize() operator.

partition

Partition a publisher's values into two separate publishers of values that match, and don't match, the provided predicate.

let source = PassthroughSubject<Int, Never>()

let (even, odd) = source.partition { $0 % 2 == 0 }

even.sink(receiveValue: { print("even: \($0)") })
odd.sink(receiveValue: { print("odd: \($0)") })

source.send(1)
source.send(2)
source.send(3)
source.send(4)
source.send(5)

Output:

odd: 1
even: 2
odd: 3
even: 4
odd: 5

ZipMany

This repo includes two overloads on Combine’s Publisher.zip methods (which, at the time of writing only go up to arity three).

This lets you arbitrarily zip many publishers and receive an array of inner publisher outputs back.

let first = PassthroughSubject<Int, Never>()
let second = PassthroughSubject<Int, Never>()
let third = PassthroughSubject<Int, Never>()
let fourth = PassthroughSubject<Int, Never>()

subscription = first
  .zip(with: second, third, fourth)
  .map { $0.reduce(0, +) }
  .sink(receiveValue: { print("zipped: \($0)") })

first.send(1)
second.send(2)
third.send(3)
fourth.send(4)

You may also use .zip() directly on a collection of publishers with the same output and failure types, e.g.

[first, second, third, fourth]
  .zip()
  .map { $0.reduce(0, +) }
  .sink(receiveValue: { print("zipped: \($0)") })

Output:

zipped: 10

MergeMany

This repo includes an extension for Collection that allows you to call .merge() directly on a collection of publishers with the same output and failure types.

This lets you arbitrarily merge many publishers and receive inner publisher outputs back from a single publisher.

let first = PassthroughSubject<Int, Never>()
let second = PassthroughSubject<Int, Never>()
let third = PassthroughSubject<Int, Never>()
let fourth = PassthroughSubject<Int, Never>()

subscription = [first, second, third, fourth]
  .merge()
  .sink(receiveValue: { print("output: \($0)") })

first.send(1)
second.send(2)
third.send(3)
fourth.send(4)

Output:

output: 1
output: 2
output: 3
output: 4

CombineLatestMany

This repo includes two overloads on Combine’s Publisher.combineLatest methods (which, at the time of writing only go up to arity three) and an Collection.combineLatest constrained extension.

This lets you arbitrarily combine many publishers and receive an array of inner publisher outputs back.

let first = PassthroughSubject<Bool, Never>()
let second = PassthroughSubject<Bool, Never>()
let third = PassthroughSubject<Bool, Never>()
let fourth = PassthroughSubject<Bool, Never>()

subscription = [first, second, third, fourth]
  .combineLatest()
  .sink(receiveValue: { print("combineLatest: \($0)") })

first.send(true)
second.send(true)
third.send(true)
fourth.send(true)

first.send(false)

Output:

combineLatest: [true, true, true, true]
combineLatest: [false, true, true, true]

FilterMany

Filters element of a publisher collection into a new publisher collection.

let intArrayPublisher = PassthroughSubject<[Int], Never>()

intArrayPublisher
  .filterMany { $0.isMultiple(of: 2) }
  .sink(receiveValue: { print($0) })

intArrayPublisher.send([10, 2, 4, 3, 8])

Output:

none
[10, 2, 4, 8]

MapMany

Projects each element of a publisher collection into a new publisher collection form.

let intArrayPublisher = PassthroughSubject<[Int], Never>()
    
intArrayPublisher
  .mapMany(String.init)
  .sink(receiveValue: { print($0) })
    
intArrayPublisher.send([10, 2, 2, 4, 3, 8])

Output:

["10", "2", "2", "4", "3", "8"]

setOutputType

Publisher.setOutputType(to:) is an analog to .setFailureType(to:) for when Output is constrained to Never. This is especially helpful when chaining operators after an .ignoreOutput() call.

removeAllDuplicates

Publisher.removeAllDuplicates and .removeAllDuplicates(by:) are stricter forms of Apple’s Publisher.removeDuplicates and .removeDuplicates(by:)—the operators de-duplicate across all previous value events, instead of pairwise.

If your Output doesn‘t conform to Hashable or Equatable, you may instead use the comparator-based version of this operator to decide whether two elements are equal.

subscription = [1, 1, 2, 1, 3, 3, 4].publisher
  .removeAllDuplicates()
  .sink(receiveValue: { print("removeAllDuplicates: \($0)") })

Output:

removeAllDuplicates: 1
removeAllDuplicates: 2
removeAllDuplicates: 3
removeAllDuplicates: 4

share(replay:)

Similar to Publisher.share, .share(replay:) can be used to create a publisher instance with reference semantics which replays a pre-defined amount of value events to further subscribers.

let subject = PassthroughSubject<Int, Never>()

let replayedPublisher = subject
  .share(replay: 3)

subscription1 = replayedPublisher
  .sink(receiveValue: { print("first subscriber: \($0)") })
  
subject.send(1)
subject.send(2)
subject.send(3)
subject.send(4)

subscription2 = replayedPublisher
  .sink(receiveValue: { print("second subscriber: \($0)") })

Output:

first subscriber: 1
first subscriber: 2
first subscriber: 3
first subscriber: 4
second subscriber: 2
second subscriber: 3
second subscriber: 4

prefix(duration:)

An overload on Publisher.prefix that republishes values for a provided duration (in seconds), and then completes.

let subject = PassthroughSubject<Int, Never>()

subscription = subject
  .prefix(duration: 0.5, on: DispatchQueue.main)
  .sink(receiveValue: { print($0) })
  
subject.send(1)
subject.send(2)
subject.send(3)

DispatchQueue.main.asyncAfter(deadline: .now() + 1) {
  subject.send(4)
}

Output:

1
2
3

prefix(while:behavior:)

An overload on Publisher.prefix(while:) that allows for inclusion of the first element that doesn’t pass the while predicate.

let subject = PassthroughSubject<Int, Never>()

subscription = subject
  .prefix(
    while: { $0 % 2 == 0 },
    behavior: .inclusive
  )
  .sink(
    receivecompletion: { print($0) },
    receiveValue: { print($0) }
  )
  
subject.send(0)
subject.send(2)
subject.send(4)
subject.send(5)

0
2
4
5
finished

toggle()

Toggle each boolean element of a publisher collection.

let subject = PassthroughSubject<Bool, Never>()

subscription = subject
  .toggle()
  .sink(receiveValue: { print($0) })
  
subject.send(true)
subject.send(false)
subject.send(true)

Output:

false
true
false

nwise

Groups the elements of the source publisher into arrays of N consecutive elements.

let subject = PassthroughSubject<Int, Never>()

subscription = subject
  .nwise(3)
  .sink(receiveValue: { print($0) })
  
subject.send(1)
subject.send(2)
subject.send(3)
subject.send(4)
subject.send(5)

Output:

[1, 2, 3]
[2, 3, 4]
[3, 4, 5]

pairwise

Groups the elements of the source publisher into tuples of the previous and current elements

let subject = PassthroughSubject<Int, Never>()

subscription = subject
  .pairwise()
  .sink(receiveValue: { print("\($0.0) -> \($0.1)") })

subject.send(1)
subject.send(2)
subject.send(3)
subject.send(4)
subject.send(5)

Output:

1 -> 2
2 -> 3
3 -> 4
4 -> 5

ignoreOutput(setOutputType:)

Shorthand for both ignoring a publisher’s value events and re-writing its Output generic.

let onlyAFour = ["1", "2", "3"].publisher
  .ignoreOutput(setOutputType: Int.self)
  .append(4)

ignoreFailure

CombineExt provides a couple of overloads to ignore errors and optionally specify a new error type and whether to trigger completions in such cases.

ignoreFailure(completeImmediately:)
ignoreFailure(setFailureType:completeImmediately:)

enum AnError {
  case someError 
}

let subject = PassthroughSubject<Int, AnError>()

subscription = subject
  .ignoreFailure() // The `completeImmediately` parameter defaults to `true`.
  .sink(receiveValue: { print($0) }, receiveCompletion: { print($0) })

subject.send(1)
subject.send(2)
subject.send(3)
subject.send(completion: .failure(.someError))

Output:

1
2
3
.finished

mapToResult

Transforms a publisher of type AnyPublisher<Output, Failure> to AnyPublisher<Result<Output, Failure>, Never>

enum AnError: Error {
    case someError
}

let subject = PassthroughSubject<Int, AnError>()

let subscription = subject
    .mapToResult()
    .sink(receiveCompletion: { print("completion: \($0)") },
          receiveValue: { print("value: \($0)") })

subject.send(1)
subject.send(2)
subject.send(3)
subject.send(completion: .failure(.someError))

Output

value: success(1)
value: success(2)
value: success(3)
value: failure(AnError.someError)
completion: finished

flatMapBatches(of:)

Collection.flatMapBatches(of:) subscribes to the receiver’s contained publishers in batches and returns their outputs in batches, too (while maintaining order). Subsequent batches of publishers are only subscribed to when prior batches successfully complete — any one failure is forwarded downstream.

let ints = (1...6).map(Just.init)

subscription = ints
  .flatMapBatches(of: 2)
  .sink(receiveCompletion: { print($0) }, receiveValue: { print($0) })

Output:

[1, 2]
[3, 4]
[5, 6]
.finished

Publishers

This section outlines some of the custom Combine publishers CombineExt provides

AnyPublisher.create

A publisher which accepts a closure with a subscriber argument, to which you can dynamically send value or completion events.

This lets you easily create custom publishers to wrap any non-publisher asynchronous work, while still respecting the downstream consumer's backpressure demand.

You should return a Cancellable-conforming object from the closure in which you can define any cleanup actions to execute when the pubilsher completes or the subscription to the publisher is canceled.

AnyPublisher<String, MyError>.create { subscriber in
  // Values
  subscriber.send("Hello")
  subscriber.send("World!")
  
  // Complete with error
  subscriber.send(completion: .failure(MyError.someError))
  
  // Or, complete successfully
  subscriber.send(completion: .finished)

  return AnyCancellable { 
    // Perform cleanup
  }
}

You can also use an AnyPublisher initializer with the same signature:

AnyPublisher<String, MyError> { subscriber in 
    /// ...
    return AnyCancellable { }

CurrentValueRelay

A CurrentValueRelay is identical to a CurrentValueSubject with two main differences:

It only accepts values, but not completion events, which means it cannot fail.
It only publishes a .finished event upon deallocation.

let relay = CurrentValueRelay<String>("well...")

relay.sink(receiveValue: { print($0) }) // replays current value, e.g. "well..."

relay.accept("values")
relay.accept("only")
relay.accept("provide")
relay.accept("great")
relay.accept("guarantees")

Output:

well...
values
only
provide
great
guarantees

PassthroughRelay

A PassthroughRelay is identical to a PassthroughSubject with two main differences:

It only accepts values, but not completion events, which means it cannot fail.
It only publishes a .finished event upon deallocation.

let relay = PassthroughRelay<String>()
relay.accept("well...")

relay.sink(receiveValue: { print($0) }) // does not replay past value(s)

relay.accept("values")
relay.accept("only")
relay.accept("provide")
relay.accept("great")
relay.accept("guarantees")

Output:

values
only
provide
great
guarantees

Subjects

ReplaySubject

A Combine analog to Rx’s ReplaySubject type. It’s similar to a CurrentValueSubject in that it buffers values, but, it takes it a step further in allowing consumers to specify the number of values to buffer and replay to future subscribers. Also, it will handle forwarding any completion events after the buffer is cleared upon subscription.

let subject = ReplaySubject<Int, Never>(bufferSize: 3)

subject.send(1)
subject.send(2)
subject.send(3)
subject.send(4)

subject
  .sink(receiveValue: { print($0) })

subject.send(5)

Output:

License

MIT, of course ;-) See the LICENSE file.

The Apple logo and the Combine framework are property of Apple Inc.

Name		Name	Last commit message	Last commit date
Latest commit History 103 Commits
.github/workflows		.github/workflows
.swiftpm/xcode/package.xcworkspace		.swiftpm/xcode/package.xcworkspace
CombineExt.xcodeproj		CombineExt.xcodeproj
Resources		Resources
Sources		Sources
Tests		Tests
scripts		scripts
.gitignore		.gitignore
.swiftlint.yml		.swiftlint.yml
CombineExt.podspec		CombineExt.podspec
LICENSE		LICENSE
Makefile		Makefile
Package.resolved		Package.resolved
Package.swift		Package.swift
README.md		README.md
codecov.yml		codecov.yml

License

aleksanderlorenc-lw/CombineExt

Folders and files

Latest commit

History

Repository files navigation

CombineExt

Operators

Publishers

Subjects

Installation

CocoaPods

Swift Package Manager

Carthage

Operators

withLatestFrom

Output:

flatMapLatest

assign

amb

Output:

materialize

Output:

values

Output:

failures

Output:

dematerialize

partition

Output:

ZipMany

Output:

MergeMany

Output:

CombineLatestMany

Output:

FilterMany

Output:

MapMany

Output:

setOutputType

removeAllDuplicates

Output:

share(replay:)

Output:

prefix(duration:)

Output:

prefix(while:behavior:)

toggle()

Output:

nwise

Output:

pairwise

Output:

ignoreOutput(setOutputType:)

ignoreFailure

Output:

mapToResult

Output

flatMapBatches(of:)

Output:

Publishers

AnyPublisher.create

CurrentValueRelay

Output:

PassthroughRelay

Output:

Subjects

ReplaySubject

Output:

License

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages