Manual §6 Vim Mode

[ 日本語 | English ] ≫ Manual [§1 Intro | §2 Color | §3 Bind | §4 Edit | §5 Emacs | §6 Vim | §7 Comp | §8 Misc

6. Vim editing mode

In Vim editing mode, the base keymap is insert mode vi_imap, and other modes such as normal mode vi_nmap, operator-pending mode vi_omap, visual mode vi_xmap, select mode vi_smap and command-line mode vi_cmap can be entered through various key operations. Most of the operations available in vi_imap are described in §4 Edit.

6.1 Common commands

6.1.1 Count

In vi_nmap, vi_omap and vi_xmap, an integer argument called count can be specified for the succeeding command.

Key combination	Widget
0	vi-command/append-arg
1	vi-command/append-arg
2	vi-command/append-arg
3	vi-command/append-arg
4	vi-command/append-arg
5	vi-command/append-arg
6	vi-command/append-arg
7	vi-command/append-arg
8	vi-command/append-arg
9	vi-command/append-arg

When no count has been specified, 0 behaves as a motion to the beginning of the line. The key from 1 to 9 specifies a new count. When count is specified, the key from 0 to 9 adds a new digit to the existing count. The interpretation of count depends on the succeeding command.

6.1.2 Register

In vi_nmap and vi_xmap, a register for the succeeding command can be set.

Key combination	Widget	Description
" {char}	vi-command/register	Set register

6.1.3 Operator

In vi_nmap, vi_omap and vi_xmap, various operators are available. When the operator is called in vi_nmap, it enters vi_omap after recording the operator. When the operator is called in vi_xmap, the operator is applied to the selected region. When the operator is called in vi_omap, the operator is applied to the current line if the operator matches with the recorded one.

Key combination	Widget	Description
y	vi-command/operator y	Copy
d x, delete (vi_xmap)	vi-command/operator d	Cut
c s (vi_xmap)	vi-command/operator c	Cut and enter insert mode
<	vi-command/operator indent-left	Increase indentation
>	vi-command/operator indent-right	Decrease indentation
!	vi-command/operator filter	Filter by specified command
g ~ ~ (vi_omap/vi_xmap)	vi-command/operator toggle_case	Toggle cases
g u u (vi_omap/vi_xmap)	vi-command/operator u	Convert to lowercase
g U U (vi_omap/vi_xmap)	vi-command/operator U	Convert to uppercase
g ? ? (vi_omap)	vi-command/operator rot13	Encrypt by rot13
g q q (vi_omap)	vi-command/operator fold	Fold lines to fit into some width
g w	vi-command/operator fold-preserve-point	Fold lines to fit into some width and go to the original position in the text
g @	vi-command/operator map	See bleopt keymap_vi_operatorfunc

6.1.4 Motion

Motion is a type of command that moves the cursor position which may be combined with operators. Motion can be used in vi_nmap, vi_omap and vi_xmap. When a motion is called in vi_nmap and vi_xmap, the cursor is moved to the corresponding position. When a motion is called in vi_omap, the recorded operator is applied to the region between the current position and the target position, and then it turns back to vi_nmap.

Motion to the beginning or end of the line

Key combination	Widget	type
home	vi-command/beginning-of-line	exclusive
$, end	vi-command/forward-eol	inclusive
^	vi-command/first-non-space	exclusive
_	vi-command/first-non-space-forward	linewise
+, C-m, RET	vi-command/forward-first-non-space	linewise
-	vi-command/backward-first-non-space	linewise
g 0, g home	vi-command/beginning-of-graphical-line	exclusive
g ^	vi-command/graphical-first-non-space	exclusive
g $, g end	vi-command/graphical-forward-eol	inclusive
g m	vi-command/middle-of-graphical-line	exclusive
g _	vi-command/last-non-space	inclusive

Characterwise motion

Key combination	Widget	type
h, left	vi-command/backward-char	exclusive
l, right	vi-command/forward-char	exclusive
C-?, DEL, C-h, BS	vi-command/backward-char wrap	exclusive
SP	vi-command/forward-char wrap	exclusive

Linewise motion

Key combination	Widget	type
j, down, C-n, C-j	vi-command/forward-line	linewise
k, up, C-p	vi-command/backward-line	linewise
g j, g down	vi-command/graphical-forward-line	exclusive
g k, g up	vi-command/graphical-backward-line	exclusive

Wordwise motion

Key combination	Widget	type
w	vi-command/forward-vword	exclusive
W	vi-command/forward-uword	exclusive
b	vi-command/backward-vword	exclusive
B	vi-command/backward-uword	exclusive
e	vi-command/forward-vword-end	inclusive
E	vi-command/forward-uword-end	inclusive
g e	vi-command/backward-vword-end	inclusive
g E	vi-command/backward-uword-end	inclusive
C-right	vi-command/forward-vword	exclusive
S-right	vi-command/forward-vword	exclusive
C-left	vi-command/backward-vword	exclusive
S-left	vi-command/backward-vword	exclusive

Other motion

Key combination	Widget	Type	Description
g o	vi-command/nth-byte	exclusive	Move before the character that includes N[1]th byte
|	vi-command/nth-column	exclusive	Move to the N[1]th column
H	vi-command/nth-line	linewise/jump	Go to the non-space beginning of the N[1]th line counting from the top
L	vi-command/nth-last-line	linewise/jump	Go to the non-space beginning of the N[1]th line counting from the bottom
g g	vi-command/history-beginning	linewise	Load the N[1]th history entry (nmap) / Operate until the non-space beginning of the N[1]th line (omap)
G	vi-command/history-end	linewise	Load the Nth[last] history entry (nmap) / Operate until the non-space beginning of the Nth[last] line (omap)
C-home	vi-command/first-nol	linewise	Go to the non-space beginning of the N[1]th line
C-end	vi-command/last-eol	inclusive	Go to the end of the Nth[last] line

Motion to corresponding brackets

Key combination	Widget	Type
%	vi-command/search-matchpair-or vi-command/percentage-line	inclusive or linewise

When count is not specified, it moves to the corresponding bracket. When count is specified, it moves to the line at the position in the document specified by count as percentile.

Character search

Key combination	Widget	Type
f	vi-command/search-forward-char	inclusive
F	vi-command/search-backward-char	exclusive
t	vi-command/search-forward-char-prev	inclusive
T	vi-command/search-backward-char-prev	exclusive
;	vi-command/search-char-repeat	exclusive
,	vi-command/search-char-reverse-repeat	exclusive

String search

Key combination	Widget	Type
/	vi-command/search-forward	exclusive
?	vi-command/search-backward	exclusive
n	vi-command/search-repeat	exclusive
N	vi-command/search-reverse-repeat	exclusive
*	vi-command/search-word-forward	exclusive
#	vi-command/search-word-backward	exclusive

Motion to marks

Key combination	Widget	Type
` {char}	vi-command/goto-mark	exclusive
' {char}	vi-command/goto-mark line	exclusive

6.1.5 Text objects (txtobj)

The text objects are available in vi_omap and vi_xmap. When text objects are used in vi_omap, the recorded operator is applied to the specified target. When text objects are used in vi_xmap, the selection is extended to include the specified target.

Key combination	Widget
i {char}	vi-command/text-object
a {char}	vi-command/text-object

{char}	Description
w	Word (characters of the same kind)
W	Word (non-space characters)
"	Range enclosed by double quotations
'	Range enclosed by single quotations
`	Range enclosed by back quotations
(, ), b	Range enclosed by parentheses (..)
{, }, B	Range enclosed by braces {..}
<, >	Range enclosed by angle brackets <..>
[, ]	Range enclosed by brackets [..]
t	Range enclosed by HTML tags
s	Sentence (separated by periods)
p	Paragraph (separated by double new lines)

6.1.6 Miscellaneous commands

The following commands are available in vi_nmap, vi_omap and vi_xmap.

Key combination	Widget	Description
:	vi-command/commandline	Enter command-line mode

The following commands are available in any of vi_nmap, vi_omap, vi_xmap and vi_smap.

Key combination	Widget	Description
C-z	(shell command) fg	Run fg command
paste_begin	vi-command/bracketed-paste	(Internal use)

6.2 Commands specific to each mode

6.2.1 Insert mode (vi_imap)

Insert mode can be categorized into three minor modes, (usual) insert mode, replace mode and virtual replace mode. The key bindings of insert mode is the same as the one described in §4 Edit except for the following ones.

Switch mode

Key combination	Widget	Description
insert	vi_imap/overwrite-mode	Switch to replace mode
ESC, C-[	vi_imap/normal-mode	Switch to normal mode
C-c	vi_imap/normal-mode-without-insert-leave	Switch to normal mode (without special operation)
C-o	vi_imap/single-command-mode	Enter to insert-normal mode

Edit

Key combination	Widget	Description
C-w	vi_imap/delete-backward-word	Remove a word
SP	magic-space	Insert space after some expansions

Shell operations

Key combination	Widget	Description
C-j, C-RET	accept-line	Run command
C-m, RET	vi_imap/accept-single-line-or vi_imap/newline	Run command or insert a new line
C-g, C-\, C-^	bell	Ring bell and cancel the current operation
C-l	clear-screen	Clear screen and redraw the line
f1	command-help	Show help of the current command
C-x C-v	display-shell-version	Show the shell version
C-x C-e	edit-and-execute-command	Edit command in the editor and run

Internal use

Key combination	Widget
__attach__	vi_imap/__attach__
__default__	vi_imap/__default__
__before_widget__	vi_imap/__before_widget__

6.2.2 Normal mode (vi_nmap)

Normal mode can be categorized into two modes, (usual) normal mode and insert-normal mode. In insert-normal mode, the mode switches to insert mode after one command is applied.

Cancel

Key combination	Widget	Description
ESC, C-[	vi-command/bell	Ring bell and cancel
C-c	vi-command/cancel	Cancel

Switch mode

Key combination	Widget	Description
C-\ C-n	nop	vi_nmap (Do nothing)
a	vi_nmap/append-mode	vi_imap Enter insert mode after the current character
A	vi_nmap/append-mode-at-end-of-line	vi_imap Enter insert mode at the end of the line
i, insert	vi_nmap/insert-mode	vi_imap Enter insert mode before the current character
I	vi_nmap/insert-mode-at-first-non-space	vi_imap Enter insert mode at the non-space beginning of the line
g I	vi_nmap/insert-mode-at-beginning-of-line	vi_imap Enter insert mode at the beginning of the line
o	vi_nmap/insert-mode-at-forward-line	vi_imap Enter insert mode at a new line after the current line
O	vi_nmap/insert-mode-at-backward-line	vi_imap Enter insert mode at a new line before the current line
R	vi_nmap/replace-mode	vi_imap Enter replace mode
g R	vi_nmap/virtual-replace-mode	vi_imap Enter virtual replace mode
g i	vi_nmap/insert-mode-at-previous-point	vi_imap Enter insert mode at the previous position
v	vi_nmap/charwise-visual-mode	vi_xmap Enter characterwise visual mode
V	vi_nmap/linewise-visual-mode	vi_xmap Enter linewise visual mode
C-v, C-q	vi_nmap/blockwise-visual-mode	vi_xmap Enter blockwise visual mode
g v	vi-command/previous-visual-area	vi_xmap Enter previous visual mode with the previous range
g h	vi_nmap/charwise-select-mode	vi_smap Enter characterwise select mode
g H	vi_nmap/linewise-select-mode	vi_smap Enter linewise select mode
g C-h	vi_nmap/blockwise-select-mode	vi_smap Enter blockwise select mode

Linewise operation

Key combination	Widget	Description
Y	vi_nmap/copy-current-line	Copy current line
S	vi_nmap/kill-current-line-and-insert	Cut current line and enter insert mode
D	vi_nmap/kill-forward-line	Cut the range between current position and the end of line
C	vi_nmap/kill-forward-line-and-insert	Cut the range between current position and the end of line and enter insert mode
J	vi_nmap/connect-line-with-space	Join lines by spaces
g J	vi_nmap/connect-line	Join lines

Scroll

Key combination	Widget	Description
C-d	vi-command/forward-line-scroll	Move N lines [a half page] forward and scroll
C-e	vi-command/forward-scroll	Scroll forward by N lines [a half page]
C-u	vi-command/backward-line-scroll	Move N lines [a half page] backward and scroll
C-y	vi-command/backward-scroll	Scroll backward by N lines [a half page]
C-f, next	vi-command/pagedown	Move N[1] pages forward and scroll
C-b, prior	vi-command/pageup	Move N[1] pages backward and scroll

Characterwise operation

Key combination	Widget	Description
~	vi_nmap/forward-char-toggle-case	Move N[1] characters forward toggling the cases
x, delete	vi_nmap/kill-forward-char	Delete the current character
s	vi_nmap/kill-forward-char-and-insert	Delete the current character and enter insert mode
X	vi_nmap/kill-backward-char	Delete the previous character
r	vi_nmap/replace-char	Replace the current character
g r	vi_nmap/virtual-replace-char	Replace the current character considering visual width

Operation to numbers

Key combination	Widget	Description
C-a	vi_nmap/increment	Increase the number by N[1]
C-x	vi_nmap/decrement	Decrease the number by N[1]

Paste/Record/Replay registers

Key combination	Widget	Description
p	vi_nmap/paste-after	Paste after the current character
P	vi_nmap/paste-before	Paste before the current character
q {char}	vi_nmap/record-register	Start/End recording a macro
@ {char}	vi_nmap/play-register	Replay a macro

Undo and redo

Key combination	Widget	Description
.	vi_nmap/repeat	Repeat the previous command
u	vi_nmap/undo	Undo
C-r	vi_nmap/redo	Redo
U	vi_nmap/revert	Undo all

Mark

Key combination	Widget	Description
m {char}	vi-command/set-mark	Mark the current position

Redraw and show information

Key combination	Widget
z t	vi_nmap/scroll-to-top-and-redraw
z z	vi_nmap/scroll-to-center-and-redraw
z b	vi_nmap/scroll-to-bottom-and-redraw
z RET, z C-m	vi_nmap/scroll-to-top-non-space-and-redraw
z +	vi_nmap/scroll-or-pagedown-and-redraw
z -	vi_nmap/scroll-to-bottom-non-space-and-redraw
z .	vi_nmap/scroll-to-center-non-space-and-redraw
C-g	vi-command/show-line-info

Shell operations

Key combination	Widget	Description
C-j, C-RET	vi-command/accept-line	Run the command
C-m, RET	vi-command/accept-single-line-or vi-command/forward-first-non-space	Run the command or insert a new line
C-l	clear-screen	Clear screen and redraw the line
C-d	vi-command/exit-on-empty-line	Exit the shell for empty line, or the same as C-e
K, f1	vi_nmap/command-help	Show help of the current command
Z Z, Z Q	vi-command:q	Exit the shell

Internal use

Key combination	Widget
__default__	vi-command/decompose-meta
auto_complete_enter	auto-complete-enter

6.2.3 Operator-pending mode (vi_omap)

Key combination	Widget	Description
C-\ C-n	nop	(Do nothing)
ESC, C-[, C-c	vi_omap/cancel	Cancel
v	vi_omap/switch-to-charwise	Force operand to be characterwise and toggle inclusive/exclusive
V	vi_omap/switch-to-linewise	Force operand to be linewise
C-v, C-q	vi_omap/switch-to-blockwise	Force operand to be blockwise
__default__	vi_omap/__default__	(Internal use)

6.2.4 Visual mode (vi_xmap)

Visual mode can be categorized into three minor modes, characterwise visual mode, linewise visual mode and blockwise visual mode.

Switch mode

Key combination	Widget	Description
ESC, C-[	vi_xmap/exit	Exit visual mode
C-c, C-\ C-n, C-\ C-g	vi_xmap/cancel	Cancel visual mode
v	vi_xmap/switch-to-charwise	Switch to characterwise visual mode
V	vi_xmap/switch-to-linewise	Switch to linewise visual mode
C-v, C-q	vi_xmap/switch-to-blockwise	Switch to blockwise visual mode
g v	vi-command/previous-visual-area	Restore the state of the previous visual mode
C-g	vi_xmap/switch-to-select	Switch to select mode

Move

Key combination	Widget	Description
o	vi_xmap/exchange-points	Exchange the current position and the starting position
O	vi_xmap/exchange-boundaries	Exchange the left and right boundaries in blockwise mode, or otherwise the same with above

Copy, Paste, Insert block

Key combination	Widget	Description
C	vi_xmap/replace-block-lines	Delete the forward text until the end of line and insert (characterwise mode is treated as linewise)
D, X	vi_xmap/delete-block-lines	Delete the forward text until the end of line (characterwise mode is treated as linewise)
S, R	vi_xmap/delete-lines	Delete linewise
Y	vi_xmap/copy-block-or-lines	Copy the forward text until the end of line (characterwise mode is treated as linewise)
I	vi_xmap/insert-mode	Insert before the selection
A	vi_xmap/append-mode	Insert after the selection
p	vi_xmap/paste-after	Insert after the selection and cut the content of the selection
P	vi_xmap/paste-before	Insert before the selection and cut the content of the selection

Conversion

Key combination	Widget	Description
r {char}	vi_xmap/visual-replace-char	Replace characters in the selection
J	vi_xmap/connect-line-with-space	Connect lines with spaces
g J	vi_xmap/connect-line	Connect lines
C-a	vi_xmap/increment	Increase numbers in the selection by N[1]
C-x	vi_xmap/decrement	Decrease numbers in the selection by N[1]
g C-a	vi_xmap/progressive-increment	Increase k'th number in the selection by N[1]*k
g C-x	vi_xmap/progressive-decrement	Decrease k'th number in the selection by N[1]*k

Shell operation

Key combination	Widget	Description
f1, K	vi_xmap/command-help	Show help of the current command

Internal use

Key combination	Widget
__default__	vi-command/decompose-meta

6.2.5 Select mode (vi_smap)

Select mode has three minor modes, characterwise select mode, linewise select mode and blockwise select mode.

Switch mode

Key combination	Widget	Description
ESC, C-[	vi_xmap/exit	Exit select mode
C-c, C-\ C-n, C-\ C-g	vi_xmap/cancel	Cancel select mode
C-\ C-n	nop	(Do nothing)
C-v, C-q	vi_xmap/switch-to-visual-blockwise	Switch to blockwise visual mode
C-g	vi_xmap/switch-to-visual	Switch to character wise visual mode

Characterwise motion

Key combination	Widget
left	vi_smap/@nomarked vi-command/backward-char
right	vi_smap/@nomarked vi-command/forward-char
C-?, DEL, C-h, BS	vi_smap/@nomarked vi-command/backward-char wrap
SP	vi_smap/@nomarked vi-command/forward-char wrap
S-left	vi-command/backward-char
S-right	vi-command/forward-char
S-C-?, S-DEL, S-C-h, S-BS	vi-command/backward-char wrap
S-SP	vi-command/forward-char wrap

Wordwise motion

Key combination	Widget
C-right	vi_smap/@nomarked vi-command/forward-vword
C-left	vi_smap/@nomarked vi-command/backward-vword
S-C-right	vi-command/forward-vword
S-C-left	vi-command/backward-vword

Motion to beginning/end of line

Key combination	Widget
home	vi_smap/@nomarked vi-command/beginning-of-line
end	vi_smap/@nomarked vi-command/forward-eol
C-m, RET	vi_smap/@nomarked vi-command/forward-first-non-space
S-home	vi-command/beginning-of-line
S-end	vi-command/forward-eol
S-C-m, S-RET	vi-command/forward-first-non-space

Linewise motion

Key combination	Widget
down, C-n, C-j	vi_smap/@nomarked vi-command/forward-line
up, C-p	vi_smap/@nomarked vi-command/backward-line
C-home	vi_smap/@nomarked vi-command/nth-line
C-end	vi_smap/@nomarked vi-command/last-line
S-down, S-C-n, S-C-j	vi-command/forward-line
S-up, S-C-p	vi-command/backward-line
S-C-home	vi-command/nth-line
S-C-end	vi-command/last-line

Edit

Key combination	Widget	Description
__defchar__	vi_smap/self-insert	Delete the selection and insert the character
delete, C-?, DEL, C-h, BS	vi-command/operator d	Delete the selection
C-a	vi_xmap/increment	Increment number in the selection
C-x	vi_xmap/decrement	Decrement number in the selection

Shell operation

Key combination	Widget	Description
f1	vi_xmap/command-help	Show help of the current command

Internal use

Key combination	Widget
__default__	vi-command/decompose-meta

6.3 Setting Vim editing mode

The settings for Vim editing mode need to be performed through the hook keymap_vi_load.

# blerc (Example)

function my/vim-load-hook {
  bleopt keymap_vi_nmap_name:=$'\e[1m-- NORMAL --\e[m'
  source "$_ble_base/lib/vim-surround.sh"
}

blehook/eval-after-load keymap_vi my/vim-load-hook
# ble-0.3 and before
# ble/array#push _ble_keymap_vi_load_hook my/vim-load-hook

6.3.1 Bleopt keymap_vi_?map_cursor (Empty/Integer) (v0.2)

# hook:keymap_vi_load

# default
bleopt keymap_vi_cmap_cursor=
bleopt keymap_vi_imap_cursor=
bleopt keymap_vi_nmap_cursor=
bleopt keymap_vi_omap_cursor=
bleopt keymap_vi_smap_cursor=
bleopt keymap_vi_xmap_cursor=

# Example
bleopt keymap_vi_cmap_cursor=0
bleopt keymap_vi_imap_cursor=5
bleopt keymap_vi_nmap_cursor=2
bleopt keymap_vi_omap_cursor=4
bleopt keymap_vi_smap_cursor=2
bleopt keymap_vi_xmap_cursor=2

These options control the cursor shapes for the corresponding modes. The value has the same meaning with the bleopt variable term_cursor_external.

6.3.2 Bleopt term_vi_?map (v0.2)

# hook:keymap_vi_load

# default
bleopt term_vi_cmap=
bleopt term_vi_imap=
bleopt term_vi_nmap=
bleopt term_vi_omap=
bleopt term_vi_smap=
bleopt term_vi_xmap=

These options specify the escape sequences which should be sent to the terminal when ble.sh enters the corresponding mode

6.3.3 Bleopt keymap_vi_keymodel (v0.2)

# hook:keymap_vi_load

# default
bleopt keymap_vi_keymodel=

This option controls the behavior of motion in select mode. The value is a list of words separated by commas. When the word stopsel is contained in this option, ble.sh exits the select mode with a motion in select mode.

6.3.4 Bleopt keymap_vi_macro_depth (v0.2)

# hook:keymap_vi_load

# default
bleopt keymap_vi_macro_depth=64

This option sets the upper limit of the maximal depth of recurrence of replaying keyboard macros.

6.3.5 Bleopt keymap_vi_nmap_name (v0.2)

# hook:keymap_vi_load

# default
bleopt keymap_vi_nmap_name=$'\e[1m~\e[m'

This option specifies the string shown below the edited line in normal mode. For example, if you want to show an explicit name of the mode like in other modes, please use the following setting:

# hook:keymap_vi_load

bleopt keymap_vi_nmap_name=$'\e[1m-- NORMAL --\e[m'

If you do not want to show anything in normal mode, please use the following setting:

# hook:keymap_vi_load

bleopt keymap_vi_nmap_name=

6.3.6 Bleopt keymap_vi_operatorfunc (v0.2)

# hook:keymap_vi_load

# default
bleopt keymap_vi_operatorfunc=

This option specifies the operator name when the user input g@ in normal mode. The function ble/keymap:vi/operator:$value, where $value is the value of this setting, is used as the implementation of the operator.

6.3.7 Bleopt keymap_vi_search_match_current (Empty/Non-empty) (v0.2)

# hook:keymap_vi_load

# default
bleopt keymap_vi_search_match_current=

When this option has a non-empty value, /, ?, n, N search the word on the current position. When this option has the empty value, these keys follows the behavior of vim.

6.3.8 Bleopt keymap_vi_imap_undo (v0.3)

This option controls the frequency of recording undo. When the value more is specified, undo will be recorded for various operations in vi_imap.

# default
bleopt keymap_vi_imap_undo=

# Example
bleopt keymap_vi_imap_undo=more

6.4 Setting lib/vim-surround.sh

# hook:keymap_vi_load

source "$_ble_base/lib/vim-surround.sh"

6.4.1 Bleopt vim_surround_omap_bind (Empty/Non-empty)

# hook:keymap_vi_load after source of "vim-surround.sh"

# default
bleopt vim_surround_omap_bind=1

When this option has the empty value, it registers bindings for vim-surround directly to vi_nmap. When this option has a non-empty value, first it enters operator-pending mode by y, d and c, and s and S in operator-pending mode perform vim-surround operations.

6.4.2 Bleopt vim_surround_$INTEGER, vim_surround_? (v0.2)

This option sets up the enclosing strings corresponding to the specified character. The form vim_surround_$INTEGER sets up the enclosing strings for the character specified by Unicode $INTEGER. The other form vim_surround_? sets up the enclosing strings for the character ? directly. When the value contains CR ($'\r'), the left hand side of the first CR is regarded as the left enclosing string, and the right hand side is regarded as the right enclosing string. When the value does not contain CR, the value is used as a common string for the left and right enclosing string.

# hook:keymap_vi_load after source of "vim-surround.sh"

# default
bleopt vim_surround_45:=$'$(\r)'
bleopt vim_surround_61:=$'$((\r))'
bleopt vim_surround_Q:=\"
bleopt vim_surround_q:=\'

6.5 Setting lib/vim-arpeggio.sh

# hook:keymap_vi_load

source "$_ble_base/lib/vim-arpeggio.sh"

6.5.1 Bleopt vim_arpeggio_timeoutlen (Integer)

# hook:keymap_vi_load after source of "vim-arpeggio.sh"

# default
bleopt vim_arpeggio_timeoutlen=40

This option specifies the timeout which are used for ble/lib/vim-arpeggio.sh/bind in the unit of millisecond.

6.5.2 Function ble/lib/vim-arpeggio.sh/bind

# hook:keymap_vi_load after source of "vim-arpeggio.sh"

# Usage
ble/lib/vim-arpeggio.sh/bind [-m KEYMAP] -[fxcs@] KEYS COMMAND

KEYS specifies the key combination: two characters followed by zero or modifiers such as C-S-M-A-s-H-. For example, when jk is specified for KEYS, it sets up the binding for the keys j and k pressed simultaneously. For another example, when C-df is specified for KEYS, it sets up the binding for the keys C-d and C-f pressed simultaneously.

---

[ 日本語 | English ] ≫ Manual [§1 Intro | §2 Color | §3 Bind | §4 Edit | §5 Emacs | §6 Vim | §7 Comp | §8 Misc