diff --git a/ports/espressif/boards/unexpectedmaker_omgs3/board.cmake b/ports/espressif/boards/unexpectedmaker_omgs3/board.cmake new file mode 100644 index 000000000..c1426c950 --- /dev/null +++ b/ports/espressif/boards/unexpectedmaker_omgs3/board.cmake @@ -0,0 +1,2 @@ +# Apply board specific content here +set(IDF_TARGET "esp32s3") diff --git a/ports/espressif/boards/unexpectedmaker_omgs3/board.h b/ports/espressif/boards/unexpectedmaker_omgs3/board.h new file mode 100644 index 000000000..5e2286984 --- /dev/null +++ b/ports/espressif/boards/unexpectedmaker_omgs3/board.h @@ -0,0 +1,71 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020 Ha Thach (tinyusb.org) for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef UNEXPECTEDMAKER_OMGS3_H_ +#define UNEXPECTEDMAKER_OMGS3_H_ + +//--------------------------------------------------------------------+ +// Button +//--------------------------------------------------------------------+ + +// Enter UF2 mode if GPIO is pressed while 2nd stage bootloader indicator +// is on e.g RGB = Purple. If it is GPIO0, user should not hold this while +// reset since that will instead run the 1st stage ROM bootloader +#define PIN_BUTTON_UF2 0 + +// GPIO that implement 1-bit memory with RC components which hold the +// pin value long enough for double reset detection. +// #define PIN_DOUBLE_RESET_RC 47 + +//--------------------------------------------------------------------+ +// LED +//--------------------------------------------------------------------+ + +// GPIO connected to Neopixel data +#define NEOPIXEL_PIN 35 + +#define NEOPIXEL_POWER_PIN 34 +#define NEOPIXEL_POWER_STATE 1 + +// Brightness percentage from 1 to 255 +#define NEOPIXEL_BRIGHTNESS 0x64 + +// Number of neopixels +#define NEOPIXEL_NUMBER 1 + +//--------------------------------------------------------------------+ +// USB UF2 +//--------------------------------------------------------------------+ + +#define USB_VID 0x303A +#define USB_PID 0x8226 +#define USB_MANUFACTURER "Unexpected Maker" +#define USB_PRODUCT "OMGS3" + +#define UF2_PRODUCT_NAME USB_MANUFACTURER " " USB_PRODUCT +#define UF2_BOARD_ID "ESP32S3-OMGS3-01" +#define UF2_VOLUME_LABEL "OMGS3BOOT" +#define UF2_INDEX_URL "https://circuitpython.org/board/unexpectedmaker_omgs3/" + +#endif diff --git a/ports/espressif/boards/unexpectedmaker_omgs3/sdkconfig b/ports/espressif/boards/unexpectedmaker_omgs3/sdkconfig new file mode 100644 index 000000000..329b9a9f2 --- /dev/null +++ b/ports/espressif/boards/unexpectedmaker_omgs3/sdkconfig @@ -0,0 +1,7 @@ +# Board Specific Config + +# Partition Table +CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-8MB.csv" + +# Serial flasher config +CONFIG_ESPTOOLPY_FLASHSIZE_8MB=y diff --git a/ports/espressif/boards/unexpectedmaker_rgbtouch_mini/board.cmake b/ports/espressif/boards/unexpectedmaker_rgbtouch_mini/board.cmake new file mode 100644 index 000000000..c1426c950 --- /dev/null +++ b/ports/espressif/boards/unexpectedmaker_rgbtouch_mini/board.cmake @@ -0,0 +1,2 @@ +# Apply board specific content here +set(IDF_TARGET "esp32s3") diff --git a/ports/espressif/boards/unexpectedmaker_rgbtouch_mini/board.h b/ports/espressif/boards/unexpectedmaker_rgbtouch_mini/board.h new file mode 100644 index 000000000..b0267aa1f --- /dev/null +++ b/ports/espressif/boards/unexpectedmaker_rgbtouch_mini/board.h @@ -0,0 +1,72 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020 Ha Thach (tinyusb.org) for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef UNEXPECTEDMAKER_RGBTOUCHMINI_H_ +#define UNEXPECTEDMAKER_RGBTOUCHMINI_H_ + +//--------------------------------------------------------------------+ +// Button +//--------------------------------------------------------------------+ + +// Enter UF2 mode if GPIO is pressed while 2nd stage bootloader indicator +// is on e.g RGB = Purple. If it is GPIO0, user should not hold this while +// reset since that will instead run the 1st stage ROM bootloader +#define PIN_BUTTON_UF2 0 + +// GPIO that implement 1-bit memory with RC components which hold the +// pin value long enough for double reset detection. +// #define PIN_DOUBLE_RESET_RC 47 + +//--------------------------------------------------------------------+ +// LED +//--------------------------------------------------------------------+ + +// GPIO connected to Neopixel data +#define NEOPIXEL_PIN 39 + +#define NEOPIXEL_POWER_PIN 38 +#define NEOPIXEL_POWER_STATE 1 + +// Brightness percentage from 1 to 255 +#define NEOPIXEL_BRIGHTNESS 0x64 + +// Number of neopixels +#define NEOPIXEL_NUMBER 1 + +//--------------------------------------------------------------------+ +// USB UF2 +//--------------------------------------------------------------------+ + +#define USB_VID 0x303A +#define USB_PID 0x8200 +#define USB_MANUFACTURER "Unexpected Maker" +#define USB_PRODUCT "RGB Touch Mini" + +#define UF2_PRODUCT_NAME USB_MANUFACTURER " " USB_PRODUCT +#define UF2_BOARD_ID "ESP32S3-RGBTouch-01" +#define UF2_VOLUME_LABEL "RGBTMBOOT" +#define UF2_INDEX_URL \ + "https://circuitpython.org/board/unexpectedmaker_rgbtouch_mini/" + +#endif diff --git a/ports/espressif/boards/unexpectedmaker_rgbtouch_mini/sdkconfig b/ports/espressif/boards/unexpectedmaker_rgbtouch_mini/sdkconfig new file mode 100644 index 000000000..329b9a9f2 --- /dev/null +++ b/ports/espressif/boards/unexpectedmaker_rgbtouch_mini/sdkconfig @@ -0,0 +1,7 @@ +# Board Specific Config + +# Partition Table +CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-8MB.csv" + +# Serial flasher config +CONFIG_ESPTOOLPY_FLASHSIZE_8MB=y diff --git a/ports/espressif/boards/unexpectedmaker_tinywatchs3/board.cmake b/ports/espressif/boards/unexpectedmaker_tinywatchs3/board.cmake new file mode 100644 index 000000000..c1426c950 --- /dev/null +++ b/ports/espressif/boards/unexpectedmaker_tinywatchs3/board.cmake @@ -0,0 +1,2 @@ +# Apply board specific content here +set(IDF_TARGET "esp32s3") diff --git a/ports/espressif/boards/unexpectedmaker_tinywatchs3/board.h b/ports/espressif/boards/unexpectedmaker_tinywatchs3/board.h new file mode 100644 index 000000000..10d48d64b --- /dev/null +++ b/ports/espressif/boards/unexpectedmaker_tinywatchs3/board.h @@ -0,0 +1,72 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020 Ha Thach (tinyusb.org) for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef UNEXPECTEDMAKER_TINYWATCHS3_H_ +#define UNEXPECTEDMAKER_TINYWATCHS3_H_ + +//--------------------------------------------------------------------+ +// Button +//--------------------------------------------------------------------+ + +// Enter UF2 mode if GPIO is pressed while 2nd stage bootloader indicator +// is on e.g RGB = Purple. If it is GPIO0, user should not hold this while +// reset since that will instead run the 1st stage ROM bootloader +#define PIN_BUTTON_UF2 0 + +// GPIO that implement 1-bit memory with RC components which hold the +// pin value long enough for double reset detection. +// #define PIN_DOUBLE_RESET_RC 47 + +//--------------------------------------------------------------------+ +// LED +//--------------------------------------------------------------------+ + +// GPIO connected to Neopixel data +// #define NEOPIXEL_PIN 18 + +// #define NEOPIXEL_POWER_PIN 17 +// #define NEOPIXEL_POWER_STATE 1 + +// Brightness percentage from 1 to 255 +#define NEOPIXEL_BRIGHTNESS 0x64 + +// Number of neopixels +#define NEOPIXEL_NUMBER 0 + +//--------------------------------------------------------------------+ +// USB UF2 +//--------------------------------------------------------------------+ + +#define USB_VID 0x303A +#define USB_PID 0x81B2 +#define USB_MANUFACTURER "Unexpected Maker" +#define USB_PRODUCT "TinyWATCHS3" + +#define UF2_PRODUCT_NAME USB_MANUFACTURER " " USB_PRODUCT +#define UF2_BOARD_ID "ESP32S3-TinyWATCHS3-01" +#define UF2_VOLUME_LABEL "TWS3BOOT" +#define UF2_INDEX_URL \ + "https://circuitpython.org/board/unexpectedmaker_tinyswatchs3/" + +#endif diff --git a/ports/espressif/boards/unexpectedmaker_tinywatchs3/sdkconfig b/ports/espressif/boards/unexpectedmaker_tinywatchs3/sdkconfig new file mode 100644 index 000000000..329b9a9f2 --- /dev/null +++ b/ports/espressif/boards/unexpectedmaker_tinywatchs3/sdkconfig @@ -0,0 +1,7 @@ +# Board Specific Config + +# Partition Table +CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-8MB.csv" + +# Serial flasher config +CONFIG_ESPTOOLPY_FLASHSIZE_8MB=y