Skip to content

Latest commit

 

History

History
94 lines (70 loc) · 3.35 KB

README.md

File metadata and controls

94 lines (70 loc) · 3.35 KB
Raw

mm2

To download ModeSMixer2, ModeSDeco2, and AcarSDeco2 packages for varios OS and architures, click link below:
https://github.com/abcd567a/mm2/releases/tag/v1

ModeSMixer2 installation script for RPi 2/3/4, and PC x86_64 amd64:

Copy-paste following command in SSH console and press Enter key. The script will install and configure modesmixer2.

(1) For 32-bit (armhf) and 64-bit (arm64)

  • Raspberry Pi OS
  • Ubuntu24 OS for RPi
  • Armbian OS for Rpi & OrangePi
  • DietPi OS for RPi
  • Kali Linux Arm OS for RPi

sudo bash -c "$(wget -O - https://raw.githubusercontent.com/abcd567a/mm2/master/install-mm2.sh)"

(2) For Ubuntu 20, 22 & 24 (x86_64), Kali Linux 2020, 2022, & 2024 amd64 :
sudo bash -c "$(wget -O - https://raw.githubusercontent.com/abcd567a/mm2/master/install-mm2-ubuntu.sh)"

(4) For Debian 10, 11, 12, & 13 (x86_64):
sudo bash -c "$(wget -O - https://raw.githubusercontent.com/abcd567a/mm2/master/install-mm2-debian.sh)"

After script finishes, it displays following message

=======================
INSTALLATION COMPLETED
=======================
PLEASE DO FOLLOWING:

(1) If installed on RPi, in your browser, go to web interface at http://ip-of-pi:8787. 
(2) If installed on Ubuntu20, in browser of Ubuntu go to web interface at http://localhost:8787 or http://127.0.0.1:8787


(3) Open file mm2.sh for editing by following command:

sudo nano /usr/share/mm2/mm2.conf

Add following line: 

--location xx.xxxx:yy.yyyy 

(Replace xx.xxxx and yy.yyyy by your 
actual latitude and longitude) 
After entering location, Save (Ctrl+o) and Close (Ctrl+x) file md2.conf 
then restart mm2 by following command: 

sudo systemctl restart mm2



To see status sudo systemctl status mm2
To restart    sudo systemctl restart mm2
To stop       sudo systemctl stop mm2

CONFIGURATION

The configuration file can be edited by following command;
sudo nano /usr/share/mm2/mm2.conf

Default contents of config file
Default setting are for a decoder like dump1090-mutability or dump1090-fa running on the RPi.
This can be changed by editing config file
You can add extra arguments, one per line starting with -- 

--inConnectId 127.0.0.1:30005:ADSB
--inConnectId 127.0.0.1:30105:MLAT
--web 8787

To see all config parameters 

modesmixer2 --help

CLERING MAXIMUM COVERAGE CURVE ON THE MAP

The maximum coverage curve data is stored in file distances.json. If you want to clear the coverage plot and start a fresh plot, stop mm2, delete this file and start mm2. Upon start, when mm2 does not find file distances.json, it creates it's new blank copy, and start populating it with fresh data.
IMPORTANT: Stop mm2 before deleting the file distances.json.

sudo systemctl stop mm2
sudo rm /distances.json (For installation made before February 23, 2021)
sudo rm /usr/share/mm2/distances.json (For installation made on or after February 23, 2021)
sudo systemctl start mm2

UNINSTALL

To completely remove configuration and all files, give following 6 commands:

sudo systemctl stop mm2 
sudo systemctl disable mm2 
sudo rm /lib/systemd/system/mm2.service 
sudo rm -rf /usr/share/mm2 
sudo rm /usr/bin/modesmixer2 
sudo userdel mm2