Device Report: LG WH16NS40

[ScottVordem]

Version

5.3.0

Commit hash

No response

Tested debug version?

• Yes

Which operating systems have you used?

• Windows
• Linux
• macOS
• Other

What is the architectural bit size you're using?

• 32-bit
• 64-bit
• Unsure or unknown

What processor are you using?

• An Intel or AMD
• An ARM or Apple Silicon
• Unsure or unknown

Description

LG_WH16NS40 Optical disk drive is not properly being identified as "LG WH16NS40" and is instead being identified as "HL-DT-ST_BD-RE WH16NS40" in both release and debug builds of the AARU software. This drive is also in AccurateRip's list under the correct name.

I don't know if that is what you guys use but if it is, then it is showing up with an incorrect name in the AARU software than the one in that website.

Device report:
HL-DT-ST_BD-RE WH16NS40_1.05.json.txt That is the original name of the file with the exception of the "txt" extension

Exact command line used

aaru dev report G:

Expected behavior

List device information with a confirmation of it being in database

Actual behavior

Device info is listed, but not properly identified as LG WH16NS40 and is not in database.

Output of command execution with debug output enabled

aaru 5.3.2+f4fef21d
Copyright c 2011-2023 Natalia Portillo

DEBUG (Device-Report command): --debug=True
DEBUG (Device-Report command): --device=G:
DEBUG (Device-Report command): --verbose=False
DEBUG (ATA Device): IDENTIFY PACKET DEVICE took 4.245 ms.
DEBUG (SCSI Device): INQUIRY took 0.1934 ms.
DEBUG (ATA Device): IDENTIFY PACKET DEVICE took 0.594 ms.
DEBUG (SCSI Device): GET CONFIGURATION (Starting Feature Number: 264, Return Type: Single, Sense: False, Last Error: 0) took 0.4335 ms.
Querying ATAPI IDENTIFY...
DEBUG (ATA Device): IDENTIFY PACKET DEVICE took 1.9364 ms.
Is the media removable from the reading/writing elements (flash memories ARE NOT removable)? (Y/N): y
DEBUG (SCSI Device): PREVENT ALLOW MEDIUM REMOVAL (Persistent: False, Prevent: False, Sense: False, LastError: 0) took 1.7365 ms.
DEBUG (SCSI Device): START STOP UNIT (Immediate: False, FormatLayer: 0, Power Conditions: 0, Change Format Layer: False, Load/Eject: True, Start: False, Sense: False, Last Error: 0) took 1586.2321 ms.
Please remove any media from the device and press any key when it is out.
Querying SCSI INQUIRY...
DEBUG (SCSI Device): INQUIRY took 0.2391 ms.
Querying list of SCSI EVPDs...
Querying all mode pages and subpages using SCSI MODE SENSE (10)...
DEBUG (SCSI Device): MODE SENSE(10) took 0.3361 ms.
DEBUG (SCSI Device): MODE SENSE(10) took 0.385 ms.
DEBUG (SCSI Device): MODE SENSE(10) took 0.2458 ms.
Querying all mode pages and subpages using SCSI MODE SENSE (6)...
Querying MMC GET CONFIGURATION...
DEBUG (SCSI Device): GET CONFIGURATION (Starting Feature Number: 0, Return Type: All, Sense: False, Last Error: 0) took 1.0793 ms.
Do you have want to try Plextor vendor commands? THIS IS DANGEROUS AND CAN IRREVERSIBLY DESTROY YOUR DRIVE (IF IN DOUBT PRESS 'N') (Y/N): n
Do you have want to try NEC vendor commands? THIS IS DANGEROUS AND CAN IRREVERSIBLY DESTROY YOUR DRIVE (IF IN DOUBT PRESS 'N') (Y/N): n
Do you have want to try Pioneer vendor commands? THIS IS DANGEROUS AND CAN IRREVERSIBLY DESTROY YOUR DRIVE (IF IN DOUBT PRESS 'N') (Y/N): n
Do you have want to try MediaTek vendor command F1h subcommand 06h? THIS IS DANGEROUS AND CAN IRREVERSIBLY DESTROY YOUR DRIVE (IF IN DOUBT PRESS 'N') (Y/N): n
Do you have a Audio CD disc that you can insert in the drive? (Y/N): y
Please insert it in the drive and press any key when it is ready.
DEBUG (SCSI Device): TEST UNIT READY took 33.0142 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 31.3473 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 24.1028 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 0.3906 ms.

Querying SCSI READ CAPACITY...
DEBUG (SCSI Device): READ CAPACITY took 0.3581 ms.
Querying SCSI READ CAPACITY (16)...
DEBUG (SCSI Device): READ CAPACITY(16) took 0 ms.
Querying SCSI MODE SENSE (10)...
DEBUG (SCSI Device): MODE SENSE(10) took 0.3238 ms.
Querying SCSI MODE SENSE...
Querying CD TOC...
DEBUG (SCSI Device): READ TOC/PMA/ATIP took (MSF: False, Format: 0, Track/Session Number: 0, Sense: False, LastError: 0) 0.6769 ms.
DEBUG (SCSI Report): Sense = False
Querying CD Full TOC...
DEBUG (SCSI Device): READ TOC/PMA/ATIP took (MSF: True, Format: 2, Track/Session Number: 1, Sense: False, LastError: 0) 1.2093 ms.
DEBUG (SCSI Report): Sense = False
Trying SCSI READ (6)...
DEBUG (SCSI Device): READ (6) took 0.6521 ms.
DEBUG (SCSI Report): Sense = True
Trying SCSI READ (10)...
DEBUG (SCSI Device): READ (10) took 0.7572 ms.
DEBUG (SCSI Report): Sense = True
Trying SCSI READ (12)...
DEBUG (SCSI Device): READ (12) took 0.7232 ms.
DEBUG (SCSI Report): Sense = True
Trying SCSI READ (16)...
DEBUG (SCSI Device): READ (16) took 0.6134 ms.
DEBUG (SCSI Report): Sense = True
Trying SCSI READ CD...
DEBUG (SCSI Device): READ CD (LBA: 16, Block Size: 2352, Transfer Length: 1, Expected Sector Type: Cdda, DAP: False, Relative Address: False, Sync: False, Headers: None, User Data: True, ECC/EDC: False, C2: None, Subchannel: None, Sense: False, Last Error: 0) took 70.9255 ms.
DEBUG (SCSI Report): Sense = False
Trying SCSI READ CD MSF...
DEBUG (SCSI Device): READ CD MSF (Start MSF: 528, End MSF: 529, Block Size: 2352, Expected Sector Type: Cdda, DAP: False, Sync: False, Headers: None, User Data: True, ECC/EDC: False, C2: None, Subchannel: None, Sense: False, LastError: 0) took 0.3246 ms.
DEBUG (SCSI Report): Sense = False
Trying to read CD Track 1 pre-gap...
DEBUG (SCSI Device): READ CD (LBA: 4294967286, Block Size: 2352, Transfer Length: 1, Expected Sector Type: Cdda, DAP: False, Relative Address: False, Sync: False, Headers: None, User Data: True, ECC/EDC: False, C2: None, Subchannel: None, Sense: False, Last Error: 0) took 58.817 ms.
DEBUG (SCSI Report): Sense = False
Trying to read CD Lead-In...
DEBUG (SCSI Device): READ CD (LBA: 4294962296, Block Size: 2352, Transfer Length: 1, Expected Sector Type: Cdda, DAP: False, Relative Address: False, Sync: False, Headers: None, User Data: True, ECC/EDC: False, C2: None, Subchannel: None, Sense: True, Last Error: 0) took 1.5756 ms.
DEBUG (SCSI Report): Sense = True
DEBUG (SCSI Device): READ CD (LBA: 4294963296, Block Size: 2352, Transfer Length: 1, Expected Sector Type: Cdda, DAP: False, Relative Address: False, Sync: False, Headers: None, User Data: True, ECC/EDC: False, C2: None, Subchannel: None, Sense: True, Last Error: 0) took 1.1362 ms.
DEBUG (SCSI Report): Sense = True
DEBUG (SCSI Device): READ CD (LBA: 4294964296, Block Size: 2352, Transfer Length: 1, Expected Sector Type: Cdda, DAP: False, Relative Address: False, Sync: False, Headers: None, User Data: True, ECC/EDC: False, C2: None, Subchannel: None, Sense: True, Last Error: 0) took 0.5983 ms.
DEBUG (SCSI Report): Sense = True
DEBUG (SCSI Device): READ CD (LBA: 4294965296, Block Size: 2352, Transfer Length: 1, Expected Sector Type: Cdda, DAP: False, Relative Address: False, Sync: False, Headers: None, User Data: True, ECC/EDC: False, C2: None, Subchannel: None, Sense: True, Last Error: 0) took 0.5404 ms.
DEBUG (SCSI Report): Sense = True
DEBUG (SCSI Device): READ CD (LBA: 4294966296, Block Size: 2352, Transfer Length: 1, Expected Sector Type: Cdda, DAP: False, Relative Address: False, Sync: False, Headers: None, User Data: True, ECC/EDC: False, C2: None, Subchannel: None, Sense: True, Last Error: 0) took 0.5415 ms.
DEBUG (SCSI Report): Sense = True
DEBUG (SCSI Device): READ CD (LBA: 4294966796, Block Size: 2352, Transfer Length: 1, Expected Sector Type: Cdda, DAP: False, Relative Address: False, Sync: False, Headers: None, User Data: True, ECC/EDC: False, C2: None, Subchannel: None, Sense: True, Last Error: 0) took 0.662 ms.
DEBUG (SCSI Report): Sense = True
DEBUG (SCSI Device): READ CD (LBA: 4294967046, Block Size: 2352, Transfer Length: 1, Expected Sector Type: Cdda, DAP: False, Relative Address: False, Sync: False, Headers: None, User Data: True, ECC/EDC: False, C2: None, Subchannel: None, Sense: True, Last Error: 0) took 0.5273 ms.
DEBUG (SCSI Report): Sense = True
Trying to read CD Lead-Out...
DEBUG (SCSI Device): READ CD (LBA: 204078, Block Size: 2352, Transfer Length: 1, Expected Sector Type: Cdda, DAP: False, Relative Address: False, Sync: False, Headers: None, User Data: True, ECC/EDC: False, C2: None, Subchannel: None, Sense: True, Last Error: 0) took 0.6321 ms.
DEBUG (SCSI Report): Sense = True
Trying to read C2 Pointers...
DEBUG (SCSI Device): READ CD (LBA: 11, Block Size: 2646, Transfer Length: 1, Expected Sector Type: Cdda, DAP: False, Relative Address: False, Sync: False, Headers: None, User Data: True, ECC/EDC: False, C2: C2Pointers, Subchannel: None, Sense: False, Last Error: 0) took 70.2582 ms.
DEBUG (SCSI Report): Sense = False
Trying to read subchannels...
DEBUG (SCSI Device): READ CD (LBA: 11, Block Size: 2368, Transfer Length: 1, Expected Sector Type: Cdda, DAP: False, Relative Address: False, Sync: False, Headers: None, User Data: True, ECC/EDC: False, C2: None, Subchannel: Q16, Sense: False, Last Error: 0) took 1.2026 ms.
DEBUG (SCSI Report): Sense = False
DEBUG (SCSI Device): READ CD (LBA: 11, Block Size: 2448, Transfer Length: 1, Expected Sector Type: Cdda, DAP: False, Relative Address: False, Sync: False, Headers: None, User Data: True, ECC/EDC: False, C2: None, Subchannel: Raw, Sense: False, Last Error: 0) took 0.9169 ms.
DEBUG (SCSI Report): Sense = False
DEBUG (SCSI Device): READ CD (LBA: 11, Block Size: 2448, Transfer Length: 1, Expected Sector Type: Cdda, DAP: False, Relative Address: False, Sync: False, Headers: None, User Data: True, ECC/EDC: False, C2: None, Subchannel: Rw, Sense: False, Last Error: 0) took 59.8229 ms.
DEBUG (SCSI Report): Sense = False
Trying to read subchannels with C2 Pointers...
DEBUG (SCSI Device): READ CD (LBA: 11, Block Size: 2662, Transfer Length: 1, Expected Sector Type: Cdda, DAP: False, Relative Address: False, Sync: False, Headers: None, User Data: True, ECC/EDC: False, C2: C2Pointers, Subchannel: Q16, Sense: False, Last Error: 0) took 62.4972 ms.
DEBUG (SCSI Report): Sense = False
DEBUG (SCSI Device): READ CD (LBA: 11, Block Size: 2712, Transfer Length: 1, Expected Sector Type: Cdda, DAP: False, Relative Address: False, Sync: False, Headers: None, User Data: True, ECC/EDC: False, C2: C2Pointers, Subchannel: Raw, Sense: False, Last Error: 1117) took 2.3909 ms.
DEBUG (SCSI Report): Sense = False
DEBUG (SCSI Device): READ CD (LBA: 11, Block Size: 2712, Transfer Length: 1, Expected Sector Type: Cdda, DAP: False, Relative Address: False, Sync: False, Headers: None, User Data: True, ECC/EDC: False, C2: C2Pointers, Subchannel: Rw, Sense: False, Last Error: 1117) took 92.5083 ms.
DEBUG (SCSI Report): Sense = False
Trying SCSI READ LONG (10)...
DEBUG (SCSI Device): READ LONG (10) took 12.3045 ms.
Trying HL-DT-ST (aka LG) trick to raw read DVDs...
DEBUG (SCSI Device): HL-DT-ST READ DVD (RAW) took 0.6581 ms.
DEBUG (SCSI Report): Sense = True
DEBUG (SCSI Device): PREVENT ALLOW MEDIUM REMOVAL (Persistent: False, Prevent: False, Sense: False, LastError: 0) took 0.3095 ms.
DEBUG (SCSI Device): START STOP UNIT (Immediate: False, FormatLayer: 0, Power Conditions: 0, Change Format Layer: False, Load/Eject: True, Start: False, Sense: False, Last Error: 0) took 2715.0881 ms.
Do you have a BD-R HTL (not LTH) disc that you can insert in the drive? (Y/N): n
Do you have a BD-R LTH disc that you can insert in the drive? (Y/N): n
Do you have a BD-R Quad Layer (128Gb) disc that you can insert in the drive? (Y/N): n
Do you have a BD-R Triple Layer (100Gb) disc that you can insert in the drive? (Y/N): n
Do you have a BD-RE disc that you can insert in the drive? (Y/N): n
Do you have a BD-ROM disc that you can insert in the drive? (Y/N): y
Please insert it in the drive and press any key when it is ready.
DEBUG (SCSI Device): TEST UNIT READY took 31.6477 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 34.2179 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 40.0136 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 23.5933 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 21.6805 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 1.7637 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 0.2931 ms.

Querying SCSI READ CAPACITY...
DEBUG (SCSI Device): READ CAPACITY took 0.2477 ms.
Querying SCSI READ CAPACITY (16)...
DEBUG (SCSI Device): READ CAPACITY(16) took 0 ms.
Querying SCSI MODE SENSE (10)...
DEBUG (SCSI Device): MODE SENSE(10) took 0.4019 ms.
Querying SCSI MODE SENSE...
Querying BD BCA...
DEBUG (SCSI Report): Sense = True
Querying BD Disc Information...
DEBUG (SCSI Device): READ DISC STRUCTURE (Media Type: Bd, Address: 0, Layer Number: 0, Format: DiscInformation, AGID: 0, Sense: False, Last Error: 0) took 0.213 ms.
DEBUG (SCSI Report): Sense = False
Querying BD PAC...
DEBUG (SCSI Device): READ DISC STRUCTURE (Media Type: Bd, Address: 0, Layer Number: 0, Format: Pac, AGID: 0, Sense: False, Last Error: 0) took 0.2473 ms.
DEBUG (SCSI Report): Sense = False
Trying SCSI READ (6)...
DEBUG (SCSI Device): READ (6) took 0.6884 ms.
DEBUG (SCSI Report): Sense = True
Trying SCSI READ (10)...
DEBUG (SCSI Device): READ (10) took 125.4279 ms.
DEBUG (SCSI Report): Sense = False
Trying SCSI READ (12)...
DEBUG (SCSI Device): READ (12) took 56.6536 ms.
DEBUG (SCSI Report): Sense = False
Trying SCSI READ (16)...
DEBUG (SCSI Device): READ (16) took 1.2631 ms.
DEBUG (SCSI Report): Sense = True
Trying SCSI READ LONG (10)...
DEBUG (SCSI Device): READ LONG (10) took 0.6421 ms.
Trying HL-DT-ST (aka LG) trick to raw read DVDs...
DEBUG (SCSI Device): HL-DT-ST READ DVD (RAW) took 0.6571 ms.
DEBUG (SCSI Report): Sense = True
DEBUG (SCSI Device): PREVENT ALLOW MEDIUM REMOVAL (Persistent: False, Prevent: False, Sense: False, LastError: 0) took 0.3042 ms.
DEBUG (SCSI Device): START STOP UNIT (Immediate: False, FormatLayer: 0, Power Conditions: 0, Change Format Layer: False, Load/Eject: True, Start: False, Sense: False, Last Error: 0) took 2976.2046 ms.
Do you have a CD-R disc that you can insert in the drive? (Y/N): y
Please insert it in the drive and press any key when it is ready.
DEBUG (SCSI Device): TEST UNIT READY took 24.189 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 36.4044 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 21.2779 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 1.924 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 0.3624 ms.

Querying SCSI READ CAPACITY...
DEBUG (SCSI Device): READ CAPACITY took 0.2721 ms.
Querying SCSI READ CAPACITY (16)...
DEBUG (SCSI Device): READ CAPACITY(16) took 0 ms.
Querying SCSI MODE SENSE (10)...
DEBUG (SCSI Device): MODE SENSE(10) took 0.4511 ms.
Querying SCSI MODE SENSE...
Querying CD TOC...
DEBUG (SCSI Device): READ TOC/PMA/ATIP took (MSF: False, Format: 0, Track/Session Number: 0, Sense: True, LastError: 0) 0.5741 ms.
DEBUG (SCSI Report): Sense = True
Querying CD Full TOC...
DEBUG (SCSI Device): READ TOC/PMA/ATIP took (MSF: True, Format: 2, Track/Session Number: 1, Sense: True, LastError: 0) 0.5602 ms.
DEBUG (SCSI Report): Sense = True
Querying CD ATIP...
DEBUG (SCSI Device): READ TOC/PMA/ATIP took (MSF: True, Format: 4, Track/Session Number: 0, Sense: False, LastError: 0) 0.2419 ms.
DEBUG (SCSI Report): Sense = False
Querying CD PMA...
DEBUG (SCSI Device): READ TOC/PMA/ATIP took (MSF: True, Format: 3, Track/Session Number: 0, Sense: False, LastError: 0) 0.2044 ms.
DEBUG (SCSI Report): Sense = False
Trying SCSI READ CD scrambled...
DEBUG (SCSI Device): READ CD (LBA: 16, Block Size: 2352, Transfer Length: 1, Expected Sector Type: Cdda, DAP: False, Relative Address: False, Sync: False, Headers: None, User Data: True, ECC/EDC: False, C2: None, Subchannel: None, Sense: True, Last Error: 0) took 0.8214 ms.
Trying SCSI READ (6)...
DEBUG (SCSI Device): READ (6) took 0.6152 ms.
DEBUG (SCSI Report): Sense = True
Trying SCSI READ (10)...
DEBUG (SCSI Device): READ (10) took 0.6557 ms.
DEBUG (SCSI Report): Sense = True
Trying SCSI READ (12)...
DEBUG (SCSI Device): READ (12) took 1.6923 ms.
DEBUG (SCSI Report): Sense = True
Trying SCSI READ (16)...
DEBUG (SCSI Device): READ (16) took 0.6424 ms.
DEBUG (SCSI Report): Sense = True
Trying SCSI READ CD...
DEBUG (SCSI Device): READ CD (LBA: 16, Block Size: 2048, Transfer Length: 1, Expected Sector Type: AllTypes, DAP: False, Relative Address: False, Sync: False, Headers: None, User Data: True, ECC/EDC: False, C2: None, Subchannel: None, Sense: True, Last Error: 0) took 0.8013 ms.
DEBUG (SCSI Report): Sense = True
Trying SCSI READ CD MSF...
DEBUG (SCSI Device): READ CD MSF (Start MSF: 528, End MSF: 529, Block Size: 2048, Expected Sector Type: AllTypes, DAP: False, Sync: False, Headers: None, User Data: True, ECC/EDC: False, C2: None, Subchannel: None, Sense: True, LastError: 0) took 0.6098 ms.
DEBUG (SCSI Report): Sense = True
Trying SCSI READ CD full sector...
DEBUG (SCSI Device): READ CD (LBA: 16, Block Size: 2352, Transfer Length: 1, Expected Sector Type: AllTypes, DAP: False, Relative Address: False, Sync: True, Headers: AllHeaders, User Data: True, ECC/EDC: True, C2: None, Subchannel: None, Sense: True, Last Error: 0) took 0.6999 ms.
DEBUG (SCSI Report): Sense = True
Trying SCSI READ CD MSF full sector...
DEBUG (SCSI Device): READ CD MSF (Start MSF: 528, End MSF: 529, Block Size: 2352, Expected Sector Type: AllTypes, DAP: False, Sync: False, Headers: AllHeaders, User Data: True, ECC/EDC: True, C2: None, Subchannel: None, Sense: True, LastError: 0) took 0.5959 ms.
DEBUG (SCSI Report): Sense = True
Trying to read C2 Pointers...
DEBUG (SCSI Device): READ CD (LBA: 16, Block Size: 2342, Transfer Length: 1, Expected Sector Type: AllTypes, DAP: False, Relative Address: False, Sync: False, Headers: None, User Data: True, ECC/EDC: False, C2: C2Pointers, Subchannel: None, Sense: True, Last Error: 0) took 0.6558 ms.
DEBUG (SCSI Device): READ CD (LBA: 16, Block Size: 2344, Transfer Length: 1, Expected Sector Type: AllTypes, DAP: False, Relative Address: False, Sync: False, Headers: None, User Data: True, ECC/EDC: False, C2: C2PointersAndBlock, Subchannel: None, Sense: True, Last Error: 0) took 0.6686 ms.
DEBUG (SCSI Report): Sense = True
Trying to read subchannels...
DEBUG (SCSI Device): READ CD (LBA: 16, Block Size: 2064, Transfer Length: 1, Expected Sector Type: AllTypes, DAP: False, Relative Address: False, Sync: False, Headers: None, User Data: True, ECC/EDC: False, C2: None, Subchannel: Q16, Sense: True, Last Error: 0) took 0.6994 ms.
DEBUG (SCSI Report): Sense = True
DEBUG (SCSI Device): READ CD (LBA: 16, Block Size: 2144, Transfer Length: 1, Expected Sector Type: AllTypes, DAP: False, Relative Address: False, Sync: False, Headers: None, User Data: True, ECC/EDC: False, C2: None, Subchannel: Raw, Sense: True, Last Error: 0) took 0.6287 ms.
DEBUG (SCSI Report): Sense = True
DEBUG (SCSI Device): READ CD (LBA: 16, Block Size: 2144, Transfer Length: 1, Expected Sector Type: AllTypes, DAP: False, Relative Address: False, Sync: False, Headers: None, User Data: True, ECC/EDC: False, C2: None, Subchannel: Rw, Sense: True, Last Error: 0) took 0.6376 ms.
DEBUG (SCSI Report): Sense = True
Trying to read subchannels with C2 Pointers...
DEBUG (SCSI Device): READ CD (LBA: 16, Block Size: 2358, Transfer Length: 1, Expected Sector Type: AllTypes, DAP: False, Relative Address: False, Sync: False, Headers: None, User Data: True, ECC/EDC: False, C2: C2Pointers, Subchannel: Q16, Sense: True, Last Error: 0) took 0.6984 ms.
DEBUG (SCSI Device): READ CD (LBA: 16, Block Size: 2360, Transfer Length: 1, Expected Sector Type: AllTypes, DAP: False, Relative Address: False, Sync: False, Headers: None, User Data: True, ECC/EDC: False, C2: C2PointersAndBlock, Subchannel: Q16, Sense: True, Last Error: 0) took 0.668 ms.
DEBUG (SCSI Report): Sense = True
DEBUG (SCSI Device): READ CD (LBA: 16, Block Size: 2438, Transfer Length: 1, Expected Sector Type: AllTypes, DAP: False, Relative Address: False, Sync: False, Headers: None, User Data: True, ECC/EDC: False, C2: C2Pointers, Subchannel: Raw, Sense: True, Last Error: 0) took 0.6657 ms.
DEBUG (SCSI Device): READ CD (LBA: 16, Block Size: 2440, Transfer Length: 1, Expected Sector Type: AllTypes, DAP: False, Relative Address: False, Sync: False, Headers: None, User Data: True, ECC/EDC: False, C2: C2PointersAndBlock, Subchannel: Raw, Sense: True, Last Error: 0) took 0.7892 ms.
DEBUG (SCSI Report): Sense = True
DEBUG (SCSI Device): READ CD (LBA: 16, Block Size: 2438, Transfer Length: 1, Expected Sector Type: AllTypes, DAP: False, Relative Address: False, Sync: False, Headers: None, User Data: True, ECC/EDC: False, C2: C2Pointers, Subchannel: Rw, Sense: True, Last Error: 0) took 0.6349 ms.
DEBUG (SCSI Device): READ CD (LBA: 16, Block Size: 2440, Transfer Length: 1, Expected Sector Type: AllTypes, DAP: False, Relative Address: False, Sync: False, Headers: None, User Data: True, ECC/EDC: False, C2: C2PointersAndBlock, Subchannel: Rw, Sense: True, Last Error: 0) took 0.7009 ms.
DEBUG (SCSI Report): Sense = True
Trying SCSI READ LONG (10)...
DEBUG (SCSI Device): READ LONG (10) took 0.6149 ms.
Trying HL-DT-ST (aka LG) trick to raw read DVDs...
DEBUG (SCSI Device): HL-DT-ST READ DVD (RAW) took 0.6182 ms.
DEBUG (SCSI Report): Sense = True
DEBUG (SCSI Device): PREVENT ALLOW MEDIUM REMOVAL (Persistent: False, Prevent: False, Sense: False, LastError: 0) took 0.2939 ms.
DEBUG (SCSI Device): START STOP UNIT (Immediate: False, FormatLayer: 0, Power Conditions: 0, Change Format Layer: False, Load/Eject: True, Start: False, Sense: False, Last Error: 0) took 2826.8558 ms.
Do you have a CD-ROM disc that you can insert in the drive? (Y/N): y
Please insert it in the drive and press any key when it is ready.
DEBUG (SCSI Device): TEST UNIT READY took 233.8645 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 30.6857 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 25.539 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 31.4069 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 0.3483 ms.

Querying SCSI READ CAPACITY...
DEBUG (SCSI Device): READ CAPACITY took 0.3111 ms.
Querying SCSI READ CAPACITY (16)...
DEBUG (SCSI Device): READ CAPACITY(16) took 0 ms.
Querying SCSI MODE SENSE (10)...
DEBUG (SCSI Device): MODE SENSE(10) took 0.3171 ms.
Querying SCSI MODE SENSE...
Querying CD TOC...
DEBUG (SCSI Device): READ TOC/PMA/ATIP took (MSF: False, Format: 0, Track/Session Number: 0, Sense: False, LastError: 0) 1.0159 ms.
DEBUG (SCSI Report): Sense = False
Querying CD Full TOC...
DEBUG (SCSI Device): READ TOC/PMA/ATIP took (MSF: True, Format: 2, Track/Session Number: 1, Sense: False, LastError: 0) 0.6971 ms.
DEBUG (SCSI Report): Sense = False
Querying CD ATIP...
DEBUG (SCSI Device): READ TOC/PMA/ATIP took (MSF: True, Format: 4, Track/Session Number: 0, Sense: True, LastError: 0) 0.6802 ms.
DEBUG (SCSI Report): Sense = True
Querying CD PMA...
DEBUG (SCSI Device): READ TOC/PMA/ATIP took (MSF: True, Format: 3, Track/Session Number: 0, Sense: True, LastError: 0) 0.6304 ms.
DEBUG (SCSI Report): Sense = True
Trying SCSI READ CD scrambled...
DEBUG (SCSI Device): READ CD (LBA: 16, Block Size: 2352, Transfer Length: 1, Expected Sector Type: Cdda, DAP: False, Relative Address: False, Sync: False, Headers: None, User Data: True, ECC/EDC: False, C2: None, Subchannel: None, Sense: False, Last Error: 0) took 0.5062 ms.
Trying SCSI READ (6)...
DEBUG (SCSI Device): READ (6) took 0.881 ms.
DEBUG (SCSI Report): Sense = True
Trying SCSI READ (10)...
DEBUG (SCSI Device): READ (10) took 39.82 ms.
DEBUG (SCSI Report): Sense = False
Trying SCSI READ (12)...
DEBUG (SCSI Device): READ (12) took 62.9312 ms.
DEBUG (SCSI Report): Sense = False
Trying SCSI READ (16)...
DEBUG (SCSI Device): READ (16) took 1.3465 ms.
DEBUG (SCSI Report): Sense = True
Trying SCSI READ CD...
DEBUG (SCSI Device): READ CD (LBA: 16, Block Size: 2048, Transfer Length: 1, Expected Sector Type: AllTypes, DAP: False, Relative Address: False, Sync: False, Headers: None, User Data: True, ECC/EDC: False, C2: None, Subchannel: None, Sense: False, Last Error: 0) took 61.1938 ms.
DEBUG (SCSI Report): Sense = False
Trying SCSI READ CD MSF...
DEBUG (SCSI Device): READ CD MSF (Start MSF: 528, End MSF: 529, Block Size: 2048, Expected Sector Type: AllTypes, DAP: False, Sync: False, Headers: None, User Data: True, ECC/EDC: False, C2: None, Subchannel: None, Sense: False, LastError: 0) took 0.3339 ms.
DEBUG (SCSI Report): Sense = False
Trying SCSI READ CD full sector...
DEBUG (SCSI Device): READ CD (LBA: 16, Block Size: 2352, Transfer Length: 1, Expected Sector Type: AllTypes, DAP: False, Relative Address: False, Sync: True, Headers: AllHeaders, User Data: True, ECC/EDC: True, C2: None, Subchannel: None, Sense: False, Last Error: 0) took 1.5758 ms.
DEBUG (SCSI Report): Sense = False
Trying SCSI READ CD MSF full sector...
DEBUG (SCSI Device): READ CD MSF (Start MSF: 528, End MSF: 529, Block Size: 2352, Expected Sector Type: AllTypes, DAP: False, Sync: False, Headers: AllHeaders, User Data: True, ECC/EDC: True, C2: None, Subchannel: None, Sense: False, LastError: 0) took 0.9062 ms.
DEBUG (SCSI Report): Sense = False
Trying to read CD Track 1 pre-gap...
DEBUG (SCSI Device): READ CD (LBA: 4294967286, Block Size: 2352, Transfer Length: 1, Expected Sector Type: AllTypes, DAP: False, Relative Address: False, Sync: True, Headers: AllHeaders, User Data: True, ECC/EDC: True, C2: None, Subchannel: None, Sense: False, Last Error: 0) took 63.5864 ms.
DEBUG (SCSI Report): Sense = False
Trying to read CD Lead-In...
DEBUG (SCSI Device): READ CD (LBA: 4294962296, Block Size: 2352, Transfer Length: 1, Expected Sector Type: AllTypes, DAP: False, Relative Address: False, Sync: True, Headers: AllHeaders, User Data: True, ECC/EDC: True, C2: None, Subchannel: None, Sense: True, Last Error: 0) took 1.5204 ms.
DEBUG (SCSI Report): Sense = True
DEBUG (SCSI Device): READ CD (LBA: 4294963296, Block Size: 2352, Transfer Length: 1, Expected Sector Type: AllTypes, DAP: False, Relative Address: False, Sync: True, Headers: AllHeaders, User Data: True, ECC/EDC: True, C2: None, Subchannel: None, Sense: True, Last Error: 0) took 0.6737 ms.
DEBUG (SCSI Report): Sense = True
DEBUG (SCSI Device): READ CD (LBA: 4294964296, Block Size: 2352, Transfer Length: 1, Expected Sector Type: AllTypes, DAP: False, Relative Address: False, Sync: True, Headers: AllHeaders, User Data: True, ECC/EDC: True, C2: None, Subchannel: None, Sense: True, Last Error: 0) took 0.5713 ms.
DEBUG (SCSI Report): Sense = True
DEBUG (SCSI Device): READ CD (LBA: 4294965296, Block Size: 2352, Transfer Length: 1, Expected Sector Type: AllTypes, DAP: False, Relative Address: False, Sync: True, Headers: AllHeaders, User Data: True, ECC/EDC: True, C2: None, Subchannel: None, Sense: True, Last Error: 0) took 0.521 ms.
DEBUG (SCSI Report): Sense = True
DEBUG (SCSI Device): READ CD (LBA: 4294966296, Block Size: 2352, Transfer Length: 1, Expected Sector Type: AllTypes, DAP: False, Relative Address: False, Sync: True, Headers: AllHeaders, User Data: True, ECC/EDC: True, C2: None, Subchannel: None, Sense: True, Last Error: 0) took 0.5851 ms.
DEBUG (SCSI Report): Sense = True
DEBUG (SCSI Device): READ CD (LBA: 4294966796, Block Size: 2352, Transfer Length: 1, Expected Sector Type: AllTypes, DAP: False, Relative Address: False, Sync: True, Headers: AllHeaders, User Data: True, ECC/EDC: True, C2: None, Subchannel: None, Sense: True, Last Error: 0) took 0.6058 ms.
DEBUG (SCSI Report): Sense = True
DEBUG (SCSI Device): READ CD (LBA: 4294967046, Block Size: 2352, Transfer Length: 1, Expected Sector Type: AllTypes, DAP: False, Relative Address: False, Sync: True, Headers: AllHeaders, User Data: True, ECC/EDC: True, C2: None, Subchannel: None, Sense: True, Last Error: 0) took 0.5491 ms.
DEBUG (SCSI Report): Sense = True
Trying to read CD Lead-Out...
DEBUG (SCSI Device): READ CD (LBA: 309925, Block Size: 2352, Transfer Length: 1, Expected Sector Type: AllTypes, DAP: False, Relative Address: False, Sync: True, Headers: AllHeaders, User Data: True, ECC/EDC: True, C2: None, Subchannel: None, Sense: True, Last Error: 0) took 0.6225 ms.
DEBUG (SCSI Report): Sense = True
Trying to read C2 Pointers...
DEBUG (SCSI Device): READ CD (LBA: 16, Block Size: 2646, Transfer Length: 1, Expected Sector Type: AllTypes, DAP: False, Relative Address: False, Sync: True, Headers: AllHeaders, User Data: True, ECC/EDC: True, C2: C2Pointers, Subchannel: None, Sense: False, Last Error: 0) took 839.2832 ms.
DEBUG (SCSI Report): Sense = False
Trying to read subchannels...
DEBUG (SCSI Device): READ CD (LBA: 16, Block Size: 2368, Transfer Length: 1, Expected Sector Type: AllTypes, DAP: False, Relative Address: False, Sync: True, Headers: AllHeaders, User Data: True, ECC/EDC: True, C2: None, Subchannel: Q16, Sense: False, Last Error: 0) took 1.2683 ms.
DEBUG (SCSI Report): Sense = False
DEBUG (SCSI Device): READ CD (LBA: 16, Block Size: 2448, Transfer Length: 1, Expected Sector Type: AllTypes, DAP: False, Relative Address: False, Sync: True, Headers: AllHeaders, User Data: True, ECC/EDC: True, C2: None, Subchannel: Raw, Sense: False, Last Error: 0) took 0.8807 ms.
DEBUG (SCSI Report): Sense = False
DEBUG (SCSI Device): READ CD (LBA: 16, Block Size: 2448, Transfer Length: 1, Expected Sector Type: AllTypes, DAP: False, Relative Address: False, Sync: True, Headers: AllHeaders, User Data: True, ECC/EDC: True, C2: None, Subchannel: Rw, Sense: False, Last Error: 0) took 60.3071 ms.
DEBUG (SCSI Report): Sense = False
Trying to read subchannels with C2 Pointers...
DEBUG (SCSI Device): READ CD (LBA: 16, Block Size: 2662, Transfer Length: 1, Expected Sector Type: AllTypes, DAP: False, Relative Address: False, Sync: True, Headers: AllHeaders, User Data: True, ECC/EDC: True, C2: C2Pointers, Subchannel: Q16, Sense: False, Last Error: 0) took 62.6767 ms.
DEBUG (SCSI Report): Sense = False
DEBUG (SCSI Device): READ CD (LBA: 16, Block Size: 2712, Transfer Length: 1, Expected Sector Type: AllTypes, DAP: False, Relative Address: False, Sync: True, Headers: AllHeaders, User Data: True, ECC/EDC: True, C2: C2Pointers, Subchannel: Raw, Sense: False, Last Error: 1117) took 2.5015 ms.
DEBUG (SCSI Report): Sense = False
DEBUG (SCSI Device): READ CD (LBA: 16, Block Size: 2712, Transfer Length: 1, Expected Sector Type: AllTypes, DAP: False, Relative Address: False, Sync: True, Headers: AllHeaders, User Data: True, ECC/EDC: True, C2: C2Pointers, Subchannel: Rw, Sense: False, Last Error: 1117) took 92.7799 ms.
DEBUG (SCSI Report): Sense = False
Trying SCSI READ LONG (10)...
DEBUG (SCSI Device): READ LONG (10) took 23.2813 ms.
Trying HL-DT-ST (aka LG) trick to raw read DVDs...
DEBUG (SCSI Device): HL-DT-ST READ DVD (RAW) took 0.6884 ms.
DEBUG (SCSI Report): Sense = True
DEBUG (SCSI Device): PREVENT ALLOW MEDIUM REMOVAL (Persistent: False, Prevent: False, Sense: False, LastError: 0) took 0.2965 ms.
DEBUG (SCSI Device): START STOP UNIT (Immediate: False, FormatLayer: 0, Power Conditions: 0, Change Format Layer: False, Load/Eject: True, Start: False, Sense: False, Last Error: 0) took 2825.3362 ms.
Do you have a CD-RW (marked 4x or lower) disc that you can insert in the drive? (Y/N): n
Do you have a CD-RW High Speed (marked between 8x and 12x) disc that you can insert in the drive? (Y/N): n
Do you have a CD-RW Ultra Speed (marked 16x or higher) disc that you can insert in the drive? (Y/N): n
Do you have a DVD+R disc that you can insert in the drive? (Y/N): n
Do you have a DVD+R DL disc that you can insert in the drive? (Y/N): n
Do you have a DVD+RW disc that you can insert in the drive? (Y/N): n
Do you have a DVD-R disc that you can insert in the drive? (Y/N): y
Please insert it in the drive and press any key when it is ready.
DEBUG (SCSI Device): TEST UNIT READY took 37.0215 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 31.1083 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 23.5145 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 20.5329 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 5.4175 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 0.3675 ms.

Querying SCSI READ CAPACITY...
DEBUG (SCSI Device): READ CAPACITY took 0.2632 ms.
Querying SCSI READ CAPACITY (16)...
DEBUG (SCSI Device): READ CAPACITY(16) took 0 ms.
Querying SCSI MODE SENSE (10)...
DEBUG (SCSI Device): MODE SENSE(10) took 0.5154 ms.
Querying SCSI MODE SENSE...
Querying DVD PFI...
DEBUG (SCSI Device): READ DISC STRUCTURE (Media Type: Dvd, Address: 0, Layer Number: 0, Format: DiscInformation, AGID: 0, Sense: False, Last Error: 0) took 0.4898 ms.
DEBUG (SCSI Report): Sense = False
Querying DVD DMI...
DEBUG (SCSI Device): READ DISC STRUCTURE (Media Type: Dvd, Address: 0, Layer Number: 0, Format: DiscManufacturingInformation, AGID: 0, Sense: False, Last Error: 0) took 0.2094 ms.
DEBUG (SCSI Report): Sense = False
Querying DVD PRI...
DEBUG (SCSI Device): READ DISC STRUCTURE (Media Type: Dvd, Address: 0, Layer Number: 0, Format: PreRecordedInfo, AGID: 0, Sense: False, Last Error: 0) took 0.1779 ms.
DEBUG (SCSI Report): Sense = False
Querying DVD Media ID...
DEBUG (SCSI Report): Sense = True
Querying DVD Embossed PFI...
DEBUG (SCSI Device): READ DISC STRUCTURE (Media Type: Dvd, Address: 0, Layer Number: 0, Format: DvdrPhysicalInformation, AGID: 0, Sense: False, Last Error: 0) took 33.0719 ms.
DEBUG (SCSI Report): Sense = False
Trying SCSI READ (6)...
DEBUG (SCSI Device): READ (6) took 1.3501 ms.
DEBUG (SCSI Report): Sense = True
Trying SCSI READ (10)...
DEBUG (SCSI Device): READ (10) took 1.0053 ms.
DEBUG (SCSI Report): Sense = True
Trying SCSI READ (12)...
DEBUG (SCSI Device): READ (12) took 0.8978 ms.
DEBUG (SCSI Report): Sense = True
Trying SCSI READ (16)...
DEBUG (SCSI Device): READ (16) took 0.6545 ms.
DEBUG (SCSI Report): Sense = True
Trying SCSI READ LONG (10)...
DEBUG (SCSI Device): READ LONG (10) took 0.6761 ms.
Trying HL-DT-ST (aka LG) trick to raw read DVDs...
DEBUG (SCSI Device): HL-DT-ST READ DVD (RAW) took 0.6141 ms.
DEBUG (SCSI Report): Sense = True
DEBUG (SCSI Device): PREVENT ALLOW MEDIUM REMOVAL (Persistent: False, Prevent: False, Sense: False, LastError: 0) took 0.3443 ms.
DEBUG (SCSI Device): START STOP UNIT (Immediate: False, FormatLayer: 0, Power Conditions: 0, Change Format Layer: False, Load/Eject: True, Start: False, Sense: False, Last Error: 0) took 3472.8168 ms.
Do you have a DVD-R DL disc that you can insert in the drive? (Y/N): n
Do you have a DVD-RAM (1st gen, marked 2.6Gb or 5.2Gb) disc that you can insert in the drive? (Y/N): n
Do you have a DVD-RAM (2nd gen, marked 4.7Gb or 9.4Gb) disc that you can insert in the drive? (Y/N): n
Do you have a DVD-ROM disc that you can insert in the drive? (Y/N): y
Please insert it in the drive and press any key when it is ready.
DEBUG (SCSI Device): TEST UNIT READY took 40.3957 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 36.0957 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 30.6298 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 0.7969 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 0.3171 ms.

Querying SCSI READ CAPACITY...
DEBUG (SCSI Device): READ CAPACITY took 0.2175 ms.
Querying SCSI READ CAPACITY (16)...
DEBUG (SCSI Device): READ CAPACITY(16) took 0 ms.
Querying SCSI MODE SENSE (10)...
DEBUG (SCSI Device): MODE SENSE(10) took 0.3491 ms.
Querying SCSI MODE SENSE...
Querying DVD PFI...
DEBUG (SCSI Device): READ DISC STRUCTURE (Media Type: Dvd, Address: 0, Layer Number: 0, Format: DiscInformation, AGID: 0, Sense: False, Last Error: 0) took 0.2142 ms.
DEBUG (SCSI Report): Sense = False
Querying DVD DMI...
DEBUG (SCSI Device): READ DISC STRUCTURE (Media Type: Dvd, Address: 0, Layer Number: 0, Format: DiscManufacturingInformation, AGID: 0, Sense: False, Last Error: 0) took 0.2027 ms.
DEBUG (SCSI Report): Sense = False
Querying DVD CMI...
DEBUG (SCSI Device): READ DISC STRUCTURE (Media Type: Dvd, Address: 0, Layer Number: 0, Format: CopyrightInformation, AGID: 0, Sense: False, Last Error: 0) took 0.1861 ms.
DEBUG (SCSI Report): Sense = False
Querying DVD BCA...
DEBUG (SCSI Report): Sense = True
Querying DVD AACS...
DEBUG (SCSI Report): Sense = True
Trying SCSI READ (6)...
DEBUG (SCSI Device): READ (6) took 0.6275 ms.
DEBUG (SCSI Report): Sense = True
Trying SCSI READ (10)...
DEBUG (SCSI Device): READ (10) took 31.3661 ms.
DEBUG (SCSI Report): Sense = False
Trying SCSI READ (12)...
DEBUG (SCSI Device): READ (12) took 29.599 ms.
DEBUG (SCSI Report): Sense = False
Trying SCSI READ (16)...
DEBUG (SCSI Device): READ (16) took 1.2121 ms.
DEBUG (SCSI Report): Sense = True
Trying SCSI READ LONG (10)...
DEBUG (SCSI Device): READ LONG (10) took 0.6696 ms.
Trying HL-DT-ST (aka LG) trick to raw read DVDs...
DEBUG (SCSI Device): HL-DT-ST READ DVD (RAW) took 0.62 ms.
DEBUG (SCSI Report): Sense = True
DEBUG (SCSI Device): PREVENT ALLOW MEDIUM REMOVAL (Persistent: False, Prevent: False, Sense: False, LastError: 0) took 0.2939 ms.
DEBUG (SCSI Device): START STOP UNIT (Immediate: False, FormatLayer: 0, Power Conditions: 0, Change Format Layer: False, Load/Eject: True, Start: False, Sense: False, Last Error: 0) took 3543.1288 ms.
Do you have a DVD-RW disc that you can insert in the drive? (Y/N): n
Do you have a Enhanced CD (aka E-CD, CD-Plus or CD+) disc that you can insert in the drive? (Y/N): n
Do you have a Nintendo GameCube game disc that you can insert in the drive? (Y/N): n
Do you have a Nintendo Wii game disc that you can insert in the drive? (Y/N): y
Please insert it in the drive and press any key when it is ready.
DEBUG (SCSI Device): TEST UNIT READY took 30.0708 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 33.1227 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 90.9566 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 38.7379 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 3.9581 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 3.8657 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 3.8315 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 3.8229 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 3.8837 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 3.8339 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 3.8186 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 4.1282 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 3.8111 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 3.8318 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 3.8306 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 30.3901 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 3.8456 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 23.005 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 115.6374 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 39.4504 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 23.3245 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 33.7373 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 22.5635 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 3.9498 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 3.8526 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 3.8344 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 3.8347 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 3.832 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 1247.6972 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 3.8333 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 3.815 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 3.78 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 3.8018 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 3.8603 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 3.8077 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 3.8015 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 3.8122 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 3.7811 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 3.7936 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 3.8424 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 3.7938 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 3.7905 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 3.7984 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 4.0847 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 3.7857 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 3.7976 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 3.9551 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 3.873 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 3.7973 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 4.1843 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 43.8545 ms.

DEBUG (SCSI Device): PREVENT ALLOW MEDIUM REMOVAL (Persistent: False, Prevent: False, Sense: False, LastError: 0) took 19.9202 ms.
DEBUG (SCSI Device): START STOP UNIT (Immediate: False, FormatLayer: 0, Power Conditions: 0, Change Format Layer: False, Load/Eject: True, Start: False, Sense: False, Last Error: 0) took 747.8183 ms.
Do you have a Nintendo Wii U game disc that you can insert in the drive? (Y/N):
Do you have a Nintendo Wii U game disc that you can insert in the drive? (Y/N):
Do you have a Nintendo Wii U game disc that you can insert in the drive? (Y/N):
Do you have a Nintendo Wii U game disc that you can insert in the drive? (Y/N):
Do you have a Nintendo Wii U game disc that you can insert in the drive? (Y/N):
Do you have a Nintendo Wii U game disc that you can insert in the drive? (Y/N): n
Do you have a PlayStation 3 game disc that you can insert in the drive? (Y/N): y
Please insert it in the drive and press any key when it is ready.
DEBUG (SCSI Device): TEST UNIT READY took 33.2975 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 25.6145 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 20.6507 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 33.7871 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 22.5321 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 0.7555 ms.
Waiting for drive to become readyDEBUG (SCSI Device): TEST UNIT READY took 0.3279 ms.

Querying SCSI READ CAPACITY...
DEBUG (SCSI Device): READ CAPACITY took 0.2318 ms.
Querying SCSI READ CAPACITY (16)...
DEBUG (SCSI Device): READ CAPACITY(16) took 0 ms.
Querying SCSI MODE SENSE (10)...
DEBUG (SCSI Device): MODE SENSE(10) took 0.3168 ms.
Querying SCSI MODE SENSE...
Querying BD BCA...
DEBUG (SCSI Report): Sense = True
Querying BD Disc Information...
DEBUG (SCSI Device): READ DISC STRUCTURE (Media Type: Bd, Address: 0, Layer Number: 0, Format: DiscInformation, AGID: 0, Sense: False, Last Error: 0) took 0.1986 ms.
DEBUG (SCSI Report): Sense = False
Querying BD PAC...
DEBUG (SCSI Device): READ DISC STRUCTURE (Media Type: Bd, Address: 0, Layer Number: 0, Format: Pac, AGID: 0, Sense: False, Last Error: 0) took 0.2321 ms.
DEBUG (SCSI Report): Sense = False
Trying SCSI READ (6)...
DEBUG (SCSI Device): READ (6) took 0.6262 ms.
DEBUG (SCSI Report): Sense = True
Trying SCSI READ (10)...
DEBUG (SCSI Device): READ (10) took 149.4053 ms.
DEBUG (SCSI Report): Sense = False
Trying SCSI READ (12)...
DEBUG (SCSI Device): READ (12) took 56.7144 ms.
DEBUG (SCSI Report): Sense = False
Trying SCSI READ (16)...
DEBUG (SCSI Device): READ (16) took 1.1946 ms.
DEBUG (SCSI Report): Sense = True
Trying SCSI READ LONG (10)...
DEBUG (SCSI Device): READ LONG (10) took 0.6177 ms.
Trying HL-DT-ST (aka LG) trick to raw read DVDs...
DEBUG (SCSI Device): HL-DT-ST READ DVD (RAW) took 0.5972 ms.
DEBUG (SCSI Report): Sense = True
DEBUG (SCSI Device): PREVENT ALLOW MEDIUM REMOVAL (Persistent: False, Prevent: False, Sense: False, LastError: 0) took 0.2861 ms.
DEBUG (SCSI Device): START STOP UNIT (Immediate: False, FormatLayer: 0, Power Conditions: 0, Change Format Layer: False, Load/Eject: True, Start: False, Sense: False, Last Error: 0) took 2998.138 ms.
Do you have a PlayStation 4 game disc that you can insert in the drive? (Y/N): n
Do you have a PlayStation 5 game disc that you can insert in the drive? (Y/N): n
Do you have a Ultra HD Blu-ray movie disc that you can insert in the drive? (Y/N): n
Do you have a Xbox One game disc that you can insert in the drive? (Y/N): n