Skip to content

ZuluSCSI firmware ver. 1.0.7
Compare
Choose a tag to compare
@aperezbios aperezbios released this 25 Aug 19:50
· 899 commits to main since this release
v1.0.7
dc30e55
This commit was created on GitHub.com and signed with GitHub’s verified signature. The key has expired.
GPG key ID: 4AEE18F83AFDEB23
Expired
Learn about vigilant mode.

Changes in v1.0.7:

  • Disable raw fallback when image is specified through .ini (04ab950)
  • Only print warning about unevenly-divisible image sizes when host queries disk with relevant SCSI commands (2a0f42a)
  • Fix pauses during transfer in PIO mode / Avoid SysTick interrupts during transfers, including with the Akai MPC60 and Kurzweil K2000R, when running firmware version 3.87J (bf78bfd) and (d2ec620)

Previous changes in v1.0.6:

  • Fix timing violation in 10MB/s synchronous mode (eefc24a)
  • Perform reads in whole sector blocks by default (6217841) - this addresses a significant issue with reliable operation on classic Macintosh computers.

Previous changes in v1.0.5:

  • Added easier-to-use SCSI floppy emulation support (c723051). File names beginning with FDxx will be automatically configured as a removable floppy device.
  • Added EXPERIMENTAL raw pass-through (8a47a01) mode (without FAT filesystem), commit . If no image files are detected on the SD card, the whole SD card is presented as a single SCSI drive, the size of which will be the entirety of the SD card. Raw pass-through can also be manually specified in config file.

IMPORTANT:

For boards marked "ZuluSCSI V1.1", you must download and place ZuluSCSIv1_1_.bin on your SD card.
For boards marked "ZuluSCSI V1.0", you must download and place ZuluSCSIv1_0_.bin on your SD card.

The ZuluSCSI Mini is revision V1.0 hardware.

Accidentally applying the incorrect firmware will result in your ZuluSCSI being unable to read SD cards after the firmware flash completes (five LED blinks), which will then require you to re-flash the correct firmware via USB, using DFU.

Assets 6
Loading