ZuluSCSI firmware v2024.12.03

[aperezbios]

What's Changed

• Ultra SCSI (Fast-20) support, which is disabled by default. This also implements support for dynamic re0-clocking the RP2040 and RP2350 line of boards and user editable reclocking timings by @morio in Ultra SCSI (Fast20) support with reclocking the RP2040 and RP2350 line of boards and user editable reclocking timings #468
• Add Pico 2W WiFi DaynaPORT support to ZuluSCSI by @morio in Add Pico 2W WiFi DaynaPORT support to ZuluSCSI #475
• Merge the RP2350 and the RP2040 base MCU platform libraries into a common library by @morio in Merge the RP2350 and the RP2040 base MCU platform libraries into a common library #467
• Initial merge of Pico2/RP2350 support into ZuluSCSI code base by @aperezbios in Initial merge of Pico2/RP2350 support into ZuluSCSI code base #473
• Use single firmware bundle for updating all ZuluSCSI platforms by @morio in Use single firmware bundle for updating all ZuluSCSI platforms #477
• Switch activity LED blinking from delay to polling by @morio in Switch activity LED blinking from delay to polling #478
• Fixes USB serial console regression on GD32-based ZuluSCSI V1.x boards by @PetteriAimonen in Fixes for GD32F205 USB serial #476

Full Changelog: v2024.11.1...v2024.12.03

---

This discussion was created from the release ZuluSCSI firmware v2024.12.03.