| 1.0.0 |
Initial upload version |
| 1.0.1 |
Change heart beat to reduce API calls |
| 1.1.0 |
Add Heater (Power, read and set temperature) |
| 1.2.0 |
Add Thermostats, T&H devices, Covers/Blinds, multi switches and optimization code (Thanks for the testers!) |
| 1.2.1 |
Fixed value scaling problem and mode detection and some other stuff |
| 1.2.2 |
Add Doorbel |
| 1.2.3 |
Fix for incorrect 'temp_set' selection |
| 1.2.4 |
Fix Heater function |
| 1.2.5 |
Add 'Window check' and 'child lock' to Heater function |
| 1.2.6 |
Add Power readings to Switch, repair Dimmer devices and Light detection v2 fixed |
| 1.2.7 |
Add 'battery percentage' and 'battery_state' to battery power devices |
| 1.2.8 |
Fix for filament lamps |
| 1.2.9 |
Fix bug in video doorbell |
| 1.3.0 |
Add On/Off for Fan |
| 1.3.1 |
Change temperature scaling get value from tuya defined from function |
| 1.3.2 |
Add kWh logging for switch with powerreader, fix failed login detection |
| 1.3.3 |
Add on/off and other functions Siren |
| 1.3.4 |
Changed local network detection to prevend 'thread seems to have ended unexpectedly' and speedup hardware detection |
| 1.3.5 |
Add Fan's with lights |
| 1.3.6 |
Add Smart IR T&H readouts not IR Devices to complex to recreate |
| 1.3.7 |
Add 3 phase Power meter |
| 1.3.8 |
Changed scaling for result |
| 1.3.9 |
Add Gateway and CO2 Sensor |
| 1.4.0 |
Add Ledstrip with deviating config |
| 1.4.1 |
Add Doorsensor, Motionsensor with light and moddifed the subscription has expired detection |
| 1.4.2 |
Add Tempsensor, Compatible with T&H standard and DP mode |
| 1.4.3 |
Add Heatpump |
| 1.4.4 |
Fix changed lights control |
| 1.4.5 |
Add Zigbee Gateway (no reporting from device), Garage door opener, Fix changed temp control |
| 1.4.6 |
Update for Tinytuya 1.11.0 and higher no need for search ID |
| 1.4.7 |
Sub device added for Powermesument if mA is detectect, small bug fix and update install info to work with Docker |
| 1.4.8 |
Added a new config for Thermostats and bug fix restart of the plugin see 'Updating' |
| 1.4.9 |
Added a new configuration for power reading |
| 1.5.0 |
Bug fix for tinytuya 1.12.3 |
| 1.5.1 |
Added feeder |
| 1.5.2 |
Changed the detection of a faulty login credentials or expired subscription |
| 1.5.3 |
Some optimize, cleanup, turn down chattiness |
| 1.5.4 |
Add new Curtain, heater control and custom scale for thermostat with deviant behavior |
| 1.5.5 |
Add min/max for set devices |
| 1.5.6 |
Fixed colour control and added Energy breaker switch |
| 1.5.7 |
Add water leak sensor and presence sensors |
| 1.5.8 |
Add Irrigation Control and smokesensor |
| 1.5.9 |
Add new switch device |
| 1.6.0 |
Add Starlight and Smart Wireless Switch M4 device |
| 1.6.1 |
Add PJ2101A 1P WiFi Smart Meter device |
| 1.6.2 |
Add Smart Siren and boiler device |
| 1.6.3 |
Add Smart lock |
| 1.6.4 |
Add Dehumidifier |
| 1.6.5 |
Add Robot vacuum cleaner |
| 1.6.6 |
Add WIFI Dual Meter |
| 1.6.7 |
Add Air quality sensor multifunction alarm by fratton |
| 1.6.8 |
Add Air purifier and unsupported circuit breaker (DIN rail switch) |
| 1.6.9 |
Add Smartheatpump by doucha2 |
| 1.7.0 |
Add Scene remote |
| 1.7.1 |
Add Switch Robot and lux meter |
| 1.7.2 |
Add Smart Kettle and update Thermostat to 2024.1+ |
| 1.7.3 |
Add SETTI+ weather station |
| 1.7.4 |
Bug fixing |
| 1.7.5 |
Make compatible with Bookworm |
| 1.7.6 |
Add WiFi Din Rail Switch with power metering |
| 1.7.7 |
Add Airconditioner |
| 1.7.8 |
Add Intelligent triple heat pump |
| 1.7.9 |
Add Illumination sensor |
| 1.8.0 |
Modify Intelligent triple heat pump |
| 1.8.1 |
Modify Irrigation device with six areas |
| 1.8.2 |
Add Micro Inverter SP Series 800 by romaint2b |
| 1.8.3 |
Add LSC smart outdoor lamp with camera (Light only!) |
| 1.8.4 |
Bugfix multi-switch device |
| 1.8.5 |
Add Lawn Mower |
| 1.8.6 |
Fix scaling issue with some values |
| 1.8.7 |
Changed energy calculation by DKTigra |
| 1.8.8 |
Fix for waterleak sensor |
| 1.8.9 |
Fix for devices with no ip |
| 1.9.0 |
Add Smart Soil Sensor |
| 1.9.1 |
Add Pool temperature Sensor |
| 1.9.2 |
Add WiFi Digital Meter |
| 1.9.3 |
Add unsupported airconditioner |
| 1.9.4 |
Add unsupported dehumidifier |
| 1.9.5 |
Update for Python >3.11 |
| 1.9.6 |
Add unsupported roller shutter |
| 1.9.7 |
Fix category tdq to switch |
| 1.9.8 |
Add unsupported roller shutter |
| 1.9.9 |
Add extra control powermeter |
| 2.0.0 |
Add support for AV-TTW5-W/RH Ventilator |
| 2.0.1 |
Add support for Caravan and Home Air Conditioner AC3501 |
| 2.0.2 |
Add support for 8ch Tuya Wireless Switch |
| 2.0.3 |
Add a second channel cover control |
| 2.0.4 |
Add Power meter with dual channel by romaint2b |
| 2.0.5 |
Update for Smart Scene Switch 4 Gang support #133 |
| 2.0.6 |
Add Presence sensor with switch support #132 |
| 2.0.7 |
Fix issue #137, #138 |
| 2.0.8 |
Polling interval issue #141 |