Refresh interval causes Automation failure

[SGXander]

Describe the bug

I have the refresh interval set to 10s. When setting up an automation to run if I have it run exactly on a minute or 10s gap it fails with:
Error: Connection to inverter ID 1 failed.

Expected behavior

The automation action should potentially queue behind the refresh so it takes effect immediately after.

Screenshots

Broken on the minute, 10s past etc

Working at 5s interval (also at 15, 25 etc)

Diagnostic File

No diagnostic file taken

Debug logs

No response

Home Assistant Version

2024.11.3

solaredge-modbus-multi Version

3.0.2

Installation Type

HAOS

Read the Instructions

• My configuration follows https://github.com/WillCodeForCats/solaredge-modbus-multi/wiki/Configuration
• I have read the Known Issues https://github.com/WillCodeForCats/solaredge-modbus-multi/wiki/Known-Issues
• This issue is not about a template error (do not report template errors, read https://github.com/WillCodeForCats/solaredge-modbus-multi/wiki/Template-Design-Notes)

Additional Context

No response

[WillCodeForCats]

Home Assistant core decides when refreshes are executed, not the integration.

[WillCodeForCats]

Someone else mentioned they use a retry service, you can try that:

solaredge-modbus-multi/discussions/697

https://github.com/amitfin/retry