Skip to content

Latest commit

 

History

History
286 lines (191 loc) · 13.7 KB

README.md

File metadata and controls

286 lines (191 loc) · 13.7 KB
Raw

简体中文README

PhxSQL is a high-availability and strong-consistency MySQL cluster built on Paxos and Percona.

Authors: Junchao Chen, Haochuan Cui, Duokai Huang, Ming Chen and Sifan Liu

Contact us: [email protected]

PhxSQL Build Status

#PhxSQL features:

  • high availability by automatic failovers: the cluster works well when more than half of cluster nodes work and are interconnected.
  • guarantee of data consistency among cluster nodes: replacing loss-less semi-sync between MySQL master and MySQL slaves with Paxos, PhxSQL ensures zero-loss binlogs between master and slaves and supports linearizable consistency, which is as strong as that of Zookeeper.
  • complete compliance with MySQL for and MySQL client: PhxSQL supports up to serializable isolation level of transaction.
  • easy deployment and easy maintenance: PhxSQL, powered by in-house implementation of Paxos, has only 4 components including MySQL and doesn't depend on zookeeper or etcd for anything. PhxSql supports automated cluster membership hot reconfiguration.

This project includes

  • Source codes
  • Third party submodules
  • Pre-compiled binaries for Ubuntu 64bit system.

Projects on which this project depends are also published by tencent-wechat( phxpaxos, phxrpc, libco ). You can download or clone them with --recurse-submodule.

phxpaxos： http://github.com/tencent-wechat/phxpaxos

phxrpc： http://github.com/tencent-wechat/phxrpc

libco： http://github.com/tencent-wechat/libco

Compilation of PhxSQL

If you prefer pre-compiled binaries, just skip this part.

Structure of PhxSQL Directories

  • PhxSQL
    • phxsqlproxy
    • phxbinlogsvr
    • percona
    • phx_percona
      • plugin
      • phxsync_phxrpc
      • semisync
    • third_party
      • glog
      • leveldb
      • protobuf
      • phxpaxos
      • colib
      • phxrpc
    • tools
    • phxrpc_package_config

Introduction of Directories.

Name Introduction
phxsqlproxy surrogate between MySQL client and PhxSql
phxbinlogsvr server for global binlog synchronization and storage, as well as management of mastership and membership
percona Source code of percona5.6.31-77.0
phx_percona/plugin/phxsync_phxrpc A plugin running in MySql that intercepts MySQL binlogs and forwards them to phxbinlogsvr
phx_percona/plugin/semisync A semisync compatible with our modified plugin APIs of MySQL
third_party/glog GLOG library
third_party/leveldb LevelDB library
third_party/protobuf Google Protobuf 3.0+ library
third_party/phxpaxos PhxPaxos library
third_party/colib Libco library
third_party/phxrpc Phxrpc library

Preparation

Installation of third party libs

PhxSQL needs 6 third party libs(glog, leveldb, protobuf, phxpaxos, colib, phxrpc). Please install them in phxsql/third_party directory or just link to third_party.

NOTE: Please make sure -fPIC is added while executing configure in GLOG and Protobuf as well as specifying --prefix=/the/current/absolute/path.

For example: ./configure CXXFLAGS=-fPIC --prefix=/home/root/phxsql/third_party/glog.

Then download percona-server-5.6.31-77.0.tar.gz

Move percona-server-5.6\_5.6.31-77.0 to PhxSQL directory, rename or link as 'percona' (NOTE: Only percona-server-5.6_5.6.31-77.0 is available)

Preparation of installation enviroment
  1. Execute ./autoinstall.sh && make && make install
  2. Execute 'make package' to generate a tar.gz package so you can transfer to your target hosts.

(NOTE: We put the binaries in install_package/sbin, configuration files in install_package/tools/etc_template, install scripts in install_package/tools. The 'make package' command will pack 'install_package' into 'phxsql-$version.tar.gz'. Please specify -prefix=/the/path/you/want/to/install while executing ./autoinstall.sh)

Deployment of PhxSQL

Host requirements.

PhxSQL needs to run on more than 2 hosts. We suggest N >= 3 and N is an odd number, where N means the number of hosts.

Initialization of PhxSQL

  1. Transfer phxsql.tar.gz to all of the hosts you want to install. Then do as the following steps:

    1. Execute tar -xvf phxsq.tar.gz .

    2. Enter phxsql/tools, Execute python install.py --help to get the help of installation.

      (For example:python2.7 install.py -i"your_inner_ip" -p 54321 -g 6000 -y 11111 -P 17000 -a 8001 -f/tmp/data/)

  2. After executing 'install.py' on all the hosts, Execute './phxbinlogsvr_tools_phxrpc -f InitBinlogSvrMaster -h"ip1,ip2,ip3" -p 17000' in any one hosts. 17000 should be replaced with the port on which phxbinlogsvr is listening.

  3. The cluster is active while a message shows master initialization is finished.

  4. You can execute some SQLs to check the status of cluster through mysql -uroot -h"your_inner_ip" -P$phxsqlproxy_port

Simple tests.

  1. Enter phxsql/tools/
  2. Execute test_phxsql.sh phxsqlproxy_port ip1 ip2 ip3

Description of Configuration Files

PhxSQL have 3 configuration files in total.

1. my.cnf： The configuration of MySQL. Please modify it accroding to your own needs.

NOTE:Modify tools/etc_temlate/my.cnf before installation, Modify etc/my.cnf after installation

2. phxbinlogsvr.conf
Section name Key name comment
AgentOption AgentPort Port for the connection of binlogsvr and MySQL
EventDataDir　 　Directory where to store the binlogsvr data
MaxFileSize　 File size per data of phxbinlogsvr, the unit is B
MasterLease Lease length of master, the unit is second
CheckPointTime The data before CheckPointTime will be deleted by phxbinlogsvr, but it will not be deleted if some other PhxSQL nodes have not learned yet, the unit is minute
MaxDeleteCheckPointFileNum　 The maximum number of files deleted each time by phxbinlogsvr
FollowIP Enabled if it is a follower node and will learn binlog from this FollowIP, this node will not vote
PaxosOption PaxosLogPath Directory where to store paxos data
PaxosPort Port for paxos to connect each other
PacketMode The maximum size of paxos log for PhxPaxos,1 means 100M, but the network timeout will be 1 minute, 0 means 50M and network timeout is 2s(changed in dynamic).
Server IP IP for phxbinlogsvr to listen
Port Port for phxbinlogsvr to listen
LogFilePath Directory to store log
LogLevel Log level of phxbinlogsvr
3. phxsqlproxy.conf
Section name Key name comment
Server IP IP for phxsqlproxy to listen
Port Port for phxsqlproxy to listen
LogFilePath Directory to store log
LogLevel Log level of phxbinlogsvr
MasterEnableReadPort Enable readonly-port in master node

PhxSQL Usasge

phxsqlproxy is the surrogate of PhxSQL, all requests will be sent to phxsqlproxy and then be forwarded to MySQL.

phxsqlproxy provides 2 different types of port for user.

Master Port( also called Read-Write Port )

It is the port configured in phxsqlproxy.conf. Every requests sent to this port will be forwarded to the master node to excute.

Slave Port( also called Read-Only Port )

It is (MasterPort + 1). You can also specify it by setting SlavePort = xxxxx in phxsqlproxy.conf.
Every requests will be executed on the local MySQL. A master node will make a redirection to another slave nodes if MasterEnableReadPort = 0 (this will save the CPU/IO resource for write requests)

SQL Command Execution

  1. Using mysql -u$user -h$phxsqlproxyip -P$phxsqlproxyport -p$pwd to connect to phxsqlproxy
  2. Execute SQL command.

$phxsqlproxyip can be any one IP of hosts in a clusters and $phxsqlproxyport can be MasterPort or SlavePort.

PhxSQL Management

PhxSQL provides a tool phxbinlogsvr_tools_phxrpc to help the mangerment of PhxSQL.

PhxSQL cluster needs 1 MySQL admin accounts and 1 synchronization account. The default admin account is (root, "" ), the default synchronization account is ( replica, replica123 ), They can be modified( and only be modifyed ) via phxbinlogsvr_tools_phxrpc. DON'T DO THIS MANUALLY.

Following is some commands you may used frequently.

phxbinlogsvr_tools -f GetMasterInfoFromGlobal -h <host> -p <port>

**Function:**Get the current master info from quorum nodes( IP and timeout ).

Arguments:

  • Host: Any one IP of clusters nodes
  • Port: Port which phxbinlogsvr is listening. like 17000

phxbinlogsvr_tools -f SetMySqlAdminInfo -h <host> -p <port> -u <admin username> -d <admin pwd> -U <new admin username> -D <new admin pwd>

Function: Set the user and password of admin account.

Arguments:

  • Host: Any one IP of clusters nodes
  • Port: Port which phxbinlogsvr is listening. like 17000
  • Admin username: Current account user( default is root )
  • Admin pwd: Current account password( default is "" )
  • New admin username: New user
  • New admin pwd: New password

phxbinlogsvr_tools -f SetMySqlReplicaInfo -h <host> -p <port> -u <admin username> -d <admin pwd> -U <new replica username> -D <new replica pwd>

Function: Set the user and password of synchronization account.

Arguments：

  • Host: Any one IP of clusters nodes
  • Port: Port which phxbinlogsvr is listening. like 17000
  • Admin username: Current account user( default is root )
  • Admin pwd: Current account password( default is "" )
  • New replica username: New user
  • New replica pwd: New password

phxbinlogsvr_tools_phxrpc -f GetMemberList -h <host> -p <port>

Function: Membership of this cluster, all IPs and Ports included.

Arguments:

  • Host: Any one IP of clusters nodes
  • Port: Port which phxbinlogsvr is listening. like 17000

Phxbinlogsvr Membership Managerment

Member Deletion

Execute phxbinlogsvr_tools_phxrpc -f RemoveMember -h<host> -p<port> -m <ip_of_nodeA> to delete node A. Once it is succesfully executed, A will not learn binlog after a small period.

Member Involvement

  1. Execute phxbinlogsvr_tools -f AddMember -h<host> -p<port> -m <ip_of_nodeA> to add node A into the membership.
  2. Install PhxSQL on A.
  3. A will begin to learn data after installation is finished.
  4. Copy a snapshot of MySQL from any other nodes to A.
  5. Kill phxbinlogsvr and access MySQL through the local port( or socket ). then execute set super_read_only = 0; set read_only = 0;
  6. Dump the snapshot into MySQL.
  7. A will begin to work after a while.

Phxbinlogsvr fault Handling.

You can choose to reinstall PhxSQL if PhxSQL meets an unrecovery failure.

Phxbinlogsvr will pull the checkpoint in another node to reboot during reinstallation. It will self-kill after pulling is over(to make sure the consistency). You can reboot phxbinlogsvr after a message like "All sm load state ok, start to exit" appears.

phxbinlogsvr will stop working if a data problem arise in MySQL. We suggest you to check the status of MySQL.
You can observe logs with red "err" to check the abnormaly.

Performance Testing

Hosts Infomation

CPU : Intel(R) Xeon(R) CPU E5-2420 0 @ 1.90GHz * 24

Memory : 32G

Disk : SSD Raid10

Ping Costs

Master -> Slave : 3 ~ 4ms

Client -> Master : 4ms

Tools and Arguments

sysbench --oltp-tables-count=10 --oltp-table-size=1000000 --num-threads=500 --max-requests=100000 --report-interval=1 --max-time=200

Results

Client Threads Clusters Test sets
insert.lua (100% write) select.lua (0% write) OLTP.lua (20% write)
QPS Response time(MS) QPS Response time(MS) QPS Response time(MS)
200 PhxSQL 5076 39.34/56.93 46334 4.21/5.12 25657 140.16/186.39
200 MySQL semi-sync 4055 49.27/66.64 47528 4.10/5.00 20391 176.39/226.76
500 PhxSQL 8260 60.41/83.14 105928 4.58/5.81 46543 192.93/242.85
500 MySQL semi-sync 7072 70.60/91.72 121535 4.17/5.08 33229 270.38/345.84

NOTE:The 2 Response times means average and 95% percentile