diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 53559227ad54..3408ffb1c048 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -46,12 +46,13 @@
  *
  * Example Configs:     https://github.com/MarlinFirmware/Configurations/branches/all
  *
- * Průša Calculator:    https://blog.prusaprinters.org/calculator_3416/
+ * Průša Calculator:    https://blog.prusa3d.com/calculator_3416/
  *
  * Calibration Guides:  https://reprap.org/wiki/Calibration
  *                      https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide
- *                      https://sites.google.com/site/repraplogphase/calibration-of-your-reprap
+ *                      https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap
  *                      https://youtu.be/wAL9d7FgInk
+ *                      https://teachingtechyt.github.io/calibration.html
  *
  * Calibration Objects: https://www.thingiverse.com/thing:5573
  *                      https://www.thingiverse.com/thing:1278865
@@ -1206,8 +1207,8 @@
     // Radius around the center where the arm cannot reach
     #define MIDDLE_DEAD_ZONE_R   0  // (mm)
 
-    #define THETA_HOMING_OFFSET  0  // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073
-    #define PSI_HOMING_OFFSET    0  // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073
+    #define THETA_HOMING_OFFSET  0  // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
+    #define PSI_HOMING_OFFSET    0  // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
 
   #elif ENABLED(MP_SCARA)
 
@@ -1241,7 +1242,7 @@
   // Radius around the center where the arm cannot reach
   #define MIDDLE_DEAD_ZONE_R   0  // (mm)
 
-  // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073
+  // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
   #define THETA_HOMING_OFFSET  0
   #define PSI_HOMING_OFFSET    0
 #endif
@@ -1669,7 +1670,7 @@
   #define MAG_MOUNTED_STOW_5   { PROBE_STOW_FEEDRATE,   {   0,   0,  0 } }  // Extra move if needed
 #endif
 
-// Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J
+// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector
 // When the pin is defined you can use M672 to set/reset the probe sensitivity.
 //#define DUET_SMART_EFFECTOR
 #if ENABLED(DUET_SMART_EFFECTOR)
@@ -1685,7 +1686,7 @@
 //#define SENSORLESS_PROBING
 
 /**
- * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
+ * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Autolevel_probe
  * Deploys by touching z-axis belt. Retracts by pushing the probe down.
  */
 //#define Z_PROBE_ALLEN_KEY
@@ -3086,7 +3087,7 @@
 
 //
 // Original RADDS LCD Display+Encoder+SDCardReader
-// http://doku.radds.org/dokumentation/lcd-display/
+// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/
 //
 //#define RADDS_DISPLAY
 
@@ -3116,7 +3117,6 @@
 
 //
 // RigidBot Panel V1.0
-// http://www.inventapart.com/
 //
 //#define RIGIDBOT_PANEL
 
@@ -3160,8 +3160,9 @@
 //
 // Sainsmart (YwRobot) LCD Displays
 //
-// These require F.Malpartida's LiquidCrystal_I2C library
-// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home
+// These require LiquidCrystal_I2C library:
+//   https://github.com/MarlinFirmware/New-LiquidCrystal
+//   https://github.com/fmalpartida/New-LiquidCrystal/wiki
 //
 //#define LCD_SAINSMART_I2C_1602
 //#define LCD_SAINSMART_I2C_2004
@@ -3194,7 +3195,7 @@
 //
 
 //
-// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
+// 2-wire Non-latching LCD SR from https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection
 // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD
 //
 //#define SAV_3DLCD
@@ -3266,7 +3267,7 @@
 
 //
 // MaKr3d Makr-Panel with graphic controller and SD support.
-// https://reprap.org/wiki/MaKr3d_MaKrPanel
+// https://reprap.org/wiki/MaKrPanel
 //
 //#define MAKRPANEL
 
@@ -3284,7 +3285,7 @@
 
 //
 // Cartesio UI
-// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
 //
 //#define CARTESIO_UI
 
@@ -3329,15 +3330,15 @@
 
 //
 // BigTreeTech Mini 12864 V1.0 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight.
+// https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v1.0
 //
 //#define BTT_MINI_12864_V1
 
 //
-// Factory display for Creality CR-10
+// Factory display for Creality CR-10 / CR-7 / Ender-3
 // https://www.aliexpress.com/item/32833148327.html
 //
-// This is RAMPS-compatible using a single 10-pin connector.
-// (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
+// Connect to EXP1 on RAMPS and compatible boards.
 //
 //#define CR10_STOCKDISPLAY
 
@@ -3543,6 +3544,7 @@
 //
 // 480x320, 3.5", SPI Display with Rotary Encoder from MKS
 // Usually paired with MKS Robin Nano V2 & V3
+// https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35
 //
 //#define MKS_TS35_V2_0
 
@@ -3607,12 +3609,14 @@
 //#define ANET_ET5_TFT35
 
 //
-// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU-BX
+// 1024x600, 7", RGB Stock Display with Rotary Encoder from BIQU BX
+// https://github.com/bigtreetech/BIQU-BX/tree/master/Hardware
 //
 //#define BIQU_BX_TFT70
 
 //
 // 480x320, 3.5", SPI Stock Display with Rotary Encoder from BIQU B1 SE Series
+// https://github.com/bigtreetech/TFT35-SPI/tree/master/v1
 //
 //#define BTT_TFT35_SPI_V1_0
 
diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 980b58ee1828..186a23f8537e 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -190,7 +190,7 @@
 
 /**
  * Hephestos 2 24V heated bed upgrade kit.
- * https://store.bq.com/en/heated-bed-kit-hephestos2
+ * https://www.en3dstudios.com/product/bq-hephestos-2-heated-bed-kit/
  */
 //#define HEPHESTOS2_HEATED_BED_KIT
 #if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
@@ -3432,7 +3432,7 @@
   //#define PHOTOGRAPH_PIN 23
 
   // Canon Hack Development Kit
-  // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/
+  // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/
   //#define CHDK_PIN        4
 
   // Optional second move with delay to trigger the camera shutter
@@ -4069,7 +4069,7 @@
  * Wiki: https://wiki.aus3d.com.au/Magnetic_Encoder
  * Github: https://github.com/Aus3D/MagneticEncoder
  *
- * Supplier: https://aus3d.com.au/magnetic-encoder-module
+ * Supplier: https://aus3d.com.au/products/magnetic-encoder-module
  * Alternative Supplier: https://reliabuild3d.com/
  *
  * Reliabuild encoders have been modified to improve reliability.
@@ -4340,7 +4340,7 @@
   /**
    * Using a sensor like the MMU2S
    * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S.
-   * See https://help.prusa3d.com/en/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560, step 11
+   * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11
    */
   #if HAS_PRUSA_MMU2S
     #define MMU2_C0_RETRY   5             // Number of retries (total time = timeout*retries)
diff --git a/Marlin/Version.h b/Marlin/Version.h
index a0bd1552eb40..121d03295fdc 100644
--- a/Marlin/Version.h
+++ b/Marlin/Version.h
@@ -41,7 +41,7 @@
  * here we define this default string as the date where the latest release
  * version was tagged.
  */
-//#define STRING_DISTRIBUTION_DATE "2023-07-04"
+//#define STRING_DISTRIBUTION_DATE "2023-07-05"
 
 /**
  * Defines a generic printer name to be output to the LCD after booting Marlin.
diff --git a/Marlin/src/core/debug_section.h b/Marlin/src/core/debug_section.h
index dc4cc0143c3e..eb3d12fdf54e 100644
--- a/Marlin/src/core/debug_section.h
+++ b/Marlin/src/core/debug_section.h
@@ -41,6 +41,6 @@ class SectionLog {
     SERIAL_ECHO(fpre);
     if (the_msg) SERIAL_ECHO(AS_CHAR(' '), the_msg);
     SERIAL_CHAR(' ');
-    print_pos(current_position);
+    print_xyz(xyz_pos_t(current_position));
   }
 };
diff --git a/Marlin/src/core/macros.h b/Marlin/src/core/macros.h
index 1591eb6bd440..da17450c2b9f 100644
--- a/Marlin/src/core/macros.h
+++ b/Marlin/src/core/macros.h
@@ -375,8 +375,8 @@
     extern "C++" {
 
       // C++11 solution that is standards compliant. Return type is deduced automatically
-      template <class N> static constexpr auto _MIN(const N val) { return val; }
-      template <class N> static constexpr auto _MAX(const N val) { return val; }
+      template <class N> static constexpr N _MIN(const N val) { return val; }
+      template <class N> static constexpr N _MAX(const N val) { return val; }
       template <class L, class R> static constexpr auto _MIN(const L lhs, const R rhs) -> decltype(lhs + rhs) {
         return lhs < rhs ? lhs : rhs;
       }
diff --git a/Marlin/src/core/serial.cpp b/Marlin/src/core/serial.cpp
index bda1527545dd..2e07f3335a1d 100644
--- a/Marlin/src/core/serial.cpp
+++ b/Marlin/src/core/serial.cpp
@@ -121,12 +121,24 @@ void print_bin(uint16_t val) {
   }
 }
 
-void print_pos(NUM_AXIS_ARGS_(const_float_t) FSTR_P const prefix/*=nullptr*/, FSTR_P const suffix/*=nullptr*/) {
+void _print_xyz(NUM_AXIS_ARGS_(const_float_t) FSTR_P const prefix) {
   if (prefix) SERIAL_ECHO(prefix);
   #if NUM_AXES
     SERIAL_ECHOPGM_P(
       LIST_N(DOUBLE(NUM_AXES), SP_X_STR, x, SP_Y_STR, y, SP_Z_STR, z, SP_I_STR, i, SP_J_STR, j, SP_K_STR, k, SP_U_STR, u, SP_V_STR, v, SP_W_STR, w)
     );
   #endif
+}
+
+void print_xyz(NUM_AXIS_ARGS_(const_float_t) FSTR_P const prefix/*=nullptr*/, FSTR_P const suffix/*=nullptr*/) {
+  _print_xyz(NUM_AXIS_LIST_(x, y, z, i, j, k, u, v, w) prefix);
+  if (suffix) SERIAL_ECHO(suffix); else SERIAL_EOL();
+}
+
+void print_xyze(LOGICAL_AXIS_ARGS_(const_float_t) FSTR_P const prefix/*=nullptr*/, FSTR_P const suffix/*=nullptr*/) {
+  _print_xyz(NUM_AXIS_LIST_(x, y, z, i, j, k, u, v, w) prefix);
+  #if HAS_EXTRUDERS
+    SERIAL_ECHOPGM_P(SP_E_STR, e);
+  #endif
   if (suffix) SERIAL_ECHO(suffix); else SERIAL_EOL();
 }
diff --git a/Marlin/src/core/serial.h b/Marlin/src/core/serial.h
index fceaa0992c29..96cff02508e3 100644
--- a/Marlin/src/core/serial.h
+++ b/Marlin/src/core/serial.h
@@ -243,16 +243,18 @@ void serial_offset(const_float_t v, const uint8_t sp=0); // For v==0 draw space
 
 void print_bin(const uint16_t val);
 
-void print_pos(NUM_AXIS_ARGS_(const_float_t) FSTR_P const prefix=nullptr, FSTR_P const suffix=nullptr);
-
-#if LOGICAL_AXES > 1
-  inline void print_pos(const xyze_pos_t &xyze, FSTR_P const prefix=nullptr, FSTR_P const suffix=nullptr) {
-    print_pos(NUM_AXIS_ELEM_(xyze) prefix, suffix);
-  }
-#endif
-
-#define SERIAL_POS(SUFFIX,VAR) do { print_pos(VAR, F("  " STRINGIFY(VAR) "="), F(" : " SUFFIX "\n")); }while(0)
-#define SERIAL_XYZ(PREFIX,V...) do { print_pos(V, F(PREFIX)); }while(0)
+void print_xyz(NUM_AXIS_ARGS_(const_float_t) FSTR_P const prefix=nullptr, FSTR_P const suffix=nullptr);
+inline void print_xyz(const xyz_pos_t &xyz, FSTR_P const prefix=nullptr, FSTR_P const suffix=nullptr) {
+  print_xyz(NUM_AXIS_ELEM_(xyz) prefix, suffix);
+}
+
+void print_xyze(LOGICAL_AXIS_ARGS_(const_float_t) FSTR_P const prefix=nullptr, FSTR_P const suffix=nullptr);
+inline void print_xyze(const xyze_pos_t &xyze, FSTR_P const prefix=nullptr, FSTR_P const suffix=nullptr) {
+  print_xyze(LOGICAL_AXIS_ELEM_(xyze) prefix, suffix);
+}
+
+#define SERIAL_POS(SUFFIX,VAR) do { print_xyz(VAR, F("  " STRINGIFY(VAR) "="), F(" : " SUFFIX "\n")); }while(0)
+#define SERIAL_XYZ(PREFIX,V...) do { print_xyz(V, F(PREFIX)); }while(0)
 
 /**
  * Extended string that can echo itself to serial
diff --git a/Marlin/src/core/types.h b/Marlin/src/core/types.h
index 6c0983694ce6..679cb2ce13e7 100644
--- a/Marlin/src/core/types.h
+++ b/Marlin/src/core/types.h
@@ -48,6 +48,19 @@ template <class L, class R> struct IF<true, L, R> { typedef L type; };
 #define MAIN_AXIS_NAMES       NUM_AXIS_LIST(X, Y, Z, I, J, K, U, V, W)
 #define STR_AXES_MAIN         NUM_AXIS_GANG("X", "Y", "Z", STR_I, STR_J, STR_K, STR_U, STR_V, STR_W)
 
+#define LOGICAL_AXIS_GANG(E,V...)  NUM_AXIS_GANG(V) GANG_ITEM_E(E)
+#define LOGICAL_AXIS_CODE(E,V...)  NUM_AXIS_CODE(V) CODE_ITEM_E(E)
+#define LOGICAL_AXIS_LIST(E,V...)  NUM_AXIS_LIST(V) LIST_ITEM_E(E)
+#define LOGICAL_AXIS_LIST_1(V)     NUM_AXIS_LIST_1(V) LIST_ITEM_E(V)
+#define LOGICAL_AXIS_ARRAY(E,V...) { LOGICAL_AXIS_LIST(E,V) }
+#define LOGICAL_AXIS_ARRAY_1(V)    { LOGICAL_AXIS_LIST_1(V) }
+#define LOGICAL_AXIS_ARGS(T)       LOGICAL_AXIS_LIST(T e, T x, T y, T z, T i, T j, T k, T u, T v, T w)
+#define LOGICAL_AXIS_ELEM(O)       LOGICAL_AXIS_LIST(O.e, O.x, O.y, O.z, O.i, O.j, O.k, O.u, O.v, O.w)
+#define LOGICAL_AXIS_DECL(T,V)     LOGICAL_AXIS_LIST(T e=V, T x=V, T y=V, T z=V, T i=V, T j=V, T k=V, T u=V, T v=V, T w=V)
+#define LOGICAL_AXIS_NAMES         LOGICAL_AXIS_LIST(E, X, Y, Z, I, J, K, U, V, W)
+#define LOGICAL_AXIS_MAP(F)        MAP(F, LOGICAL_AXIS_NAMES)
+#define STR_AXES_LOGICAL           LOGICAL_AXIS_GANG("E", "X", "Y", "Z", STR_I, STR_J, STR_K, STR_U, STR_V, STR_W)
+
 #if NUM_AXES
   #define NUM_AXES_SEP ,
   #define MAIN_AXIS_MAP(F)    MAP(F, MAIN_AXIS_NAMES)
@@ -67,18 +80,18 @@ template <class L, class R> struct IF<true, L, R> { typedef L type; };
 #define NUM_AXIS_ELEM_(T)       NUM_AXIS_ELEM(T) NUM_AXES_SEP
 #define MAIN_AXIS_NAMES_        MAIN_AXIS_NAMES NUM_AXES_SEP
 
-#define LOGICAL_AXIS_GANG(E,V...)  NUM_AXIS_GANG(V) GANG_ITEM_E(E)
-#define LOGICAL_AXIS_CODE(E,V...)  NUM_AXIS_CODE(V) CODE_ITEM_E(E)
-#define LOGICAL_AXIS_LIST(E,V...)  NUM_AXIS_LIST(V) LIST_ITEM_E(E)
-#define LOGICAL_AXIS_LIST_1(V)     NUM_AXIS_LIST_1(V) LIST_ITEM_E(V)
-#define LOGICAL_AXIS_ARRAY(E,V...) { LOGICAL_AXIS_LIST(E,V) }
-#define LOGICAL_AXIS_ARRAY_1(V)    { LOGICAL_AXIS_LIST_1(V) }
-#define LOGICAL_AXIS_ARGS(T)       LOGICAL_AXIS_LIST(T e, T x, T y, T z, T i, T j, T k, T u, T v, T w)
-#define LOGICAL_AXIS_ELEM(O)       LOGICAL_AXIS_LIST(O.e, O.x, O.y, O.z, O.i, O.j, O.k, O.u, O.v, O.w)
-#define LOGICAL_AXIS_DECL(T,V)     LOGICAL_AXIS_LIST(T e=V, T x=V, T y=V, T z=V, T i=V, T j=V, T k=V, T u=V, T v=V, T w=V)
-#define LOGICAL_AXIS_NAMES         LOGICAL_AXIS_LIST(E, X, Y, Z, I, J, K, U, V, W)
-#define LOGICAL_AXIS_MAP(F)        MAP(F, LOGICAL_AXIS_NAMES)
-#define STR_AXES_LOGICAL           LOGICAL_AXIS_GANG("E", "X", "Y", "Z", STR_I, STR_J, STR_K, STR_U, STR_V, STR_W)
+#if LOGICAL_AXES
+  #define LOGICAL_AXES_SEP ,
+#else
+  #define LOGICAL_AXES_SEP
+#endif
+
+#define LOGICAL_AXIS_GANG_(V...)    LOGICAL_AXIS_GANG(V) LOGICAL_AXES_SEP
+#define LOGICAL_AXIS_LIST_(V...)    LOGICAL_AXIS_LIST(V) LOGICAL_AXES_SEP
+#define LOGICAL_AXIS_LIST_1_(V...)  LOGICAL_AXIS_LIST_1(V) LOGICAL_AXES_SEP
+#define LOGICAL_AXIS_ARGS_(T)       LOGICAL_AXIS_ARGS(T) LOGICAL_AXES_SEP
+#define LOGICAL_AXIS_ELEM_(T)       LOGICAL_AXIS_ELEM(T) LOGICAL_AXES_SEP
+#define LOGICAL_AXIS_NAMES_         LOGICAL_AXIS_NAMES LOGICAL_AXES_SEP
 
 #define SECONDARY_AXIS_GANG(V...) GANG_N(SECONDARY_AXES, V)
 #define SECONDARY_AXIS_CODE(V...) CODE_N(SECONDARY_AXES, V)
diff --git a/Marlin/src/gcode/control/M211.cpp b/Marlin/src/gcode/control/M211.cpp
index 95ae052a7bd4..8e7d10ce65b9 100644
--- a/Marlin/src/gcode/control/M211.cpp
+++ b/Marlin/src/gcode/control/M211.cpp
@@ -47,8 +47,8 @@ void GcodeSuite::M211_report(const bool forReplay/*=true*/) {
   report_echo_start(forReplay);
   const xyz_pos_t l_soft_min = soft_endstop.min.asLogical(),
                   l_soft_max = soft_endstop.max.asLogical();
-  print_pos(l_soft_min, F(STR_SOFT_MIN), F(" "));
-  print_pos(l_soft_max, F(STR_SOFT_MAX));
+  print_xyz(l_soft_min, F(STR_SOFT_MIN), F(" "));
+  print_xyz(l_soft_max, F(STR_SOFT_MAX));
 }
 
 #endif // HAS_SOFTWARE_ENDSTOPS
diff --git a/Marlin/src/inc/Conditionals_LCD.h b/Marlin/src/inc/Conditionals_LCD.h
index df6aeae4e5f0..d36063b73651 100644
--- a/Marlin/src/inc/Conditionals_LCD.h
+++ b/Marlin/src/inc/Conditionals_LCD.h
@@ -454,7 +454,7 @@
 // Shift register panels
 // ---------------------
 // 2 wire Non-latching LCD SR from:
-// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
+// https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection
 #if ENABLED(FF_INTERFACEBOARD)
   #define SR_LCD_3W_NL    // Non latching 3 wire shift register
   #define IS_ULTIPANEL 1
diff --git a/Marlin/src/inc/Version.h b/Marlin/src/inc/Version.h
index c2c0cab98995..18388e7eaad0 100644
--- a/Marlin/src/inc/Version.h
+++ b/Marlin/src/inc/Version.h
@@ -42,7 +42,7 @@
  * version was tagged.
  */
 #ifndef STRING_DISTRIBUTION_DATE
-  #define STRING_DISTRIBUTION_DATE "2023-07-04"
+  #define STRING_DISTRIBUTION_DATE "2023-07-05"
 #endif
 
 /**
diff --git a/Marlin/src/lcd/HD44780/marlinui_HD44780.cpp b/Marlin/src/lcd/HD44780/marlinui_HD44780.cpp
index c5b4df46f28c..148d0877cf57 100644
--- a/Marlin/src/lcd/HD44780/marlinui_HD44780.cpp
+++ b/Marlin/src/lcd/HD44780/marlinui_HD44780.cpp
@@ -81,7 +81,7 @@
 #elif ENABLED(SR_LCD_2W_NL)
 
   // 2 wire Non-latching LCD SR from:
-  // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
+  // https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection
 
   LCD_CLASS lcd(SR_DATA_PIN, SR_CLK_PIN
     #if PIN_EXISTS(SR_STROBE)
diff --git a/Marlin/src/lcd/HD44780/marlinui_HD44780.h b/Marlin/src/lcd/HD44780/marlinui_HD44780.h
index 719514fb11df..6f6f5a6855b6 100644
--- a/Marlin/src/lcd/HD44780/marlinui_HD44780.h
+++ b/Marlin/src/lcd/HD44780/marlinui_HD44780.h
@@ -70,7 +70,7 @@
 #elif ENABLED(SR_LCD_2W_NL)
 
   // 2 wire Non-latching LCD SR from:
-  // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
+  // https://github.com/fmalpartida/New-LiquidCrystal/wiki/schematics#user-content-ShiftRegister_connection
   #include <LCD.h>
   #include <LiquidCrystal_SR.h>
   #define LCD_CLASS LiquidCrystal_SR
diff --git a/Marlin/src/lcd/dogm/u8g_dev_tft_upscale_from_128x64.cpp b/Marlin/src/lcd/dogm/u8g_dev_tft_upscale_from_128x64.cpp
index 160ee4412208..48c49b5c3312 100644
--- a/Marlin/src/lcd/dogm/u8g_dev_tft_upscale_from_128x64.cpp
+++ b/Marlin/src/lcd/dogm/u8g_dev_tft_upscale_from_128x64.cpp
@@ -88,8 +88,8 @@ TFT_IO tftio;
 #define X_HI (UPSCALE(TFT_PIXEL_OFFSET_X, WIDTH) - 1)
 #define Y_HI (UPSCALE(TFT_PIXEL_OFFSET_Y, HEIGHT) - 1)
 
-// 16 bit color generator: https://ee-programming-notepad.blogspot.com/2016/10/16-bit-color-generator-picker.html
-// RGB565 color picker:  https://trolsoft.ru/en/articles/rgb565-color-picker
+// RGB565 color picker: https://embeddednotepad.com/page/rgb565-color-picker
+// Hex code to color name: https://www.color-name.com/
 
 #define COLOR_BLACK       0x0000  // #000000
 #define COLOR_WHITE       0xFFFF  // #FFFFFF
@@ -104,9 +104,7 @@ TFT_IO tftio;
 #define COLOR_BLUE        0x001F  // #0000FF
 #define COLOR_YELLOW      0xFFE0  // #FFFF00
 #define COLOR_MAGENTA     0xF81F  // #FF00FF
-#define COLOR_FUCHSIA     0xF81F  // #FF00FF
 #define COLOR_CYAN        0x07FF  // #00FFFF
-#define COLOR_AQUA        0x07FF  // #00FFFF
 
 #define COLOR_MAROON      0x7800  // #800000
 #define COLOR_GREEN       0x03E0  // #008000
diff --git a/Marlin/src/lcd/e3v2/proui/dwin.cpp b/Marlin/src/lcd/e3v2/proui/dwin.cpp
index 34a37da45f64..5ea8c71be0e1 100644
--- a/Marlin/src/lcd/e3v2/proui/dwin.cpp
+++ b/Marlin/src/lcd/e3v2/proui/dwin.cpp
@@ -2357,7 +2357,7 @@ void setFlow() { setPIntOnClick(MIN_PRINT_FLOW, MAX_PRINT_FLOW, []{ planner.refr
         if (isnan(zval))
           LCD_MESSAGE(MSG_ZPROBE_OUT);
         else
-          ui.set_status(TS(F("X:"), p_float_t(xpos, 1), F(" Y:"), p_float_t(ypos, 1), F(" Z:")));
+          ui.set_status(TS(F("X:"), p_float_t(xpos, 1), F(" Y:"), p_float_t(ypos, 1), F(" Z:"), p_float_t(zval, 2)));
         inLev = false;
       }
       return zval;
@@ -2375,14 +2375,6 @@ void setFlow() { setPIntOnClick(MIN_PRINT_FLOW, MAX_PRINT_FLOW, []{ planner.refr
 
   #endif
 
-  inline void tramFL() { tram(0); }
-  inline void tramFR() { tram(1); }
-  inline void tramBR() { tram(2); }
-  inline void tramBL() { tram(3); }
-  #if ENABLED(BED_TRAMMING_INCLUDE_CENTER)
-    inline void tramC() { tram(4); }
-  #endif
-
   #if HAS_BED_PROBE && HAS_MESH
 
     void trammingwizard() {
@@ -2391,14 +2383,14 @@ void setFlow() { setPIntOnClick(MIN_PRINT_FLOW, MAX_PRINT_FLOW, []{ planner.refr
         return;
       }
       bed_mesh_t zval = {0};
-      zval[0][0] = tramFL();
+      zval[0][0] = tram(0);
       checkkey = ID_NothingToDo;
       meshViewer.drawMesh(zval, 2, 2);
-      zval[1][0] = tramFR();
+      zval[1][0] = tram(1);
       meshViewer.drawMesh(zval, 2, 2);
-      zval[1][1] = tramBR();
+      zval[1][1] = tram(2);
       meshViewer.drawMesh(zval, 2, 2);
-      zval[0][1] = tramBL();
+      zval[0][1] = tram(3);
       meshViewer.drawMesh(zval, 2, 2);
 
       DWINUI::drawCenteredString(140, F("Calculating average"));
@@ -3031,12 +3023,12 @@ void drawPrepareMenu() {
       #elif !HAS_BED_PROBE && HAS_ZOFFSET_ITEM
         MENU_ITEM_F(ICON_MoveZ0, "Home Z and disable", onDrawMenuItem, homeZAndDisable);
       #endif
-      MENU_ITEM(ICON_Axis, MSG_TRAM_FL, onDrawMenuItem, tramFL);
-      MENU_ITEM(ICON_Axis, MSG_TRAM_FR, onDrawMenuItem, tramFR);
-      MENU_ITEM(ICON_Axis, MSG_TRAM_BR, onDrawMenuItem, tramBR);
-      MENU_ITEM(ICON_Axis, MSG_TRAM_BL, onDrawMenuItem, tramBL);
+      MENU_ITEM(ICON_Axis, MSG_TRAM_FL, onDrawMenuItem, []{ (void)tram(0); });
+      MENU_ITEM(ICON_Axis, MSG_TRAM_FR, onDrawMenuItem, []{ (void)tram(1); });
+      MENU_ITEM(ICON_Axis, MSG_TRAM_BR, onDrawMenuItem, []{ (void)tram(2); });
+      MENU_ITEM(ICON_Axis, MSG_TRAM_BL, onDrawMenuItem, []{ (void)tram(3); });
       #if ENABLED(BED_TRAMMING_INCLUDE_CENTER)
-        MENU_ITEM(ICON_Axis, MSG_TRAM_C, onDrawMenuItem, tramC);
+        MENU_ITEM(ICON_Axis, MSG_TRAM_C, onDrawMenuItem, []{ (void)tram(4); });
       #endif
     }
     updateMenu(trammingMenu);
diff --git a/Marlin/src/lcd/marlinui.cpp b/Marlin/src/lcd/marlinui.cpp
index cbab4676c222..69a8e2336365 100644
--- a/Marlin/src/lcd/marlinui.cpp
+++ b/Marlin/src/lcd/marlinui.cpp
@@ -1431,9 +1431,6 @@ void MarlinUI::host_notify_P(PGM_P const pstr) {
 void MarlinUI::host_notify(const char * const cstr) {
   TERN_(HOST_STATUS_NOTIFICATIONS, hostui.notify(cstr));
 }
-void MarlinUI::host_status() {
-  TERN_(HOST_STATUS_NOTIFICATIONS, hostui.notify(status_message));
-}
 
 #include <stdarg.h>
 
@@ -1562,7 +1559,7 @@ void MarlinUI::host_status() {
     vsnprintf_P(status_message, MAX_MESSAGE_LENGTH, fmt, args);
     va_end(args);
 
-    host_status();
+    host_notify(status_message);
 
     finish_status(level > 0);
   }
@@ -1644,7 +1641,7 @@ void MarlinUI::host_status() {
     vsnprintf_P(&msg, 30, fmt, args);
     va_end(args);
 
-    host_status();
+    host_notify(msg);
   }
 
 #endif // !HAS_STATUS_MESSAGE
diff --git a/Marlin/src/lcd/marlinui.h b/Marlin/src/lcd/marlinui.h
index 3a39d840e293..9c301e03f639 100644
--- a/Marlin/src/lcd/marlinui.h
+++ b/Marlin/src/lcd/marlinui.h
@@ -361,7 +361,6 @@ class MarlinUI {
   static void host_notify_P(PGM_P const fstr);
   static void host_notify(FSTR_P const fstr) { host_notify_P(FTOP(fstr)); }
   static void host_notify(const char * const cstr);
-  static void host_status();
 
   #if HAS_STATUS_MESSAGE
 
diff --git a/Marlin/src/lcd/tft/tft_color.h b/Marlin/src/lcd/tft/tft_color.h
index 07518028aa80..66ec41e71143 100644
--- a/Marlin/src/lcd/tft/tft_color.h
+++ b/Marlin/src/lcd/tft/tft_color.h
@@ -30,8 +30,8 @@
 #define COLOR(color)          RGB(((color >> 16) & 0xFF), ((color >> 8) & 0xFF), (color & 0xFF))
 #define HALF(color)           RGB(RED(color) >> 1, GREEN(color) >> 1, BLUE(color) >> 1)
 
-// 16 bit color generator: https://ee-programming-notepad.blogspot.com/2016/10/16-bit-color-generator-picker.html
-// RGB565 color picker:  https://trolsoft.ru/en/articles/rgb565-color-picker
+// RGB565 color picker: https://embeddednotepad.com/page/rgb565-color-picker
+// Hex code to color name: https://www.color-name.com/
 
 #define COLOR_BLACK           0x0000  // #000000
 #define COLOR_WHITE           0xFFFF  // #FFFFFF
@@ -44,13 +44,13 @@
 #define COLOR_RED             0xF800  // #FF0000
 #define COLOR_SCARLET         0xF904  // #FF2020
 #define COLOR_LIME            0x7E00  // #00FF00
+#define COLOR_MIDNIGHT_BLUE   0x20AC  // #1E156E
 #define COLOR_BLUE            0x001F  // #0000FF
+#define COLOR_OCEAN_BOAT_BLUE 0x03B7  // #0075BD
 #define COLOR_LIGHT_BLUE      0x061F  // #00C3FF
 #define COLOR_YELLOW          0xFFE0  // #FFFF00
 #define COLOR_MAGENTA         0xF81F  // #FF00FF
-#define COLOR_FUCHSIA         0xF81F  // #FF00FF
 #define COLOR_CYAN            0x07FF  // #00FFFF
-#define COLOR_AQUA            0x07FF  // #00FFFF
 #define COLOR_DODGER_BLUE     0x041F  // #0080FF
 #define COLOR_VIVID_VIOLET    0x7933  // #772399
 
@@ -68,23 +68,21 @@
 #define COLOR_DARK_ORANGE     0xFC40  // #FF8C00
 #define COLOR_CORAL_RED       0xF9E7  // #FF3F3F
 
-#define COLOR_DARK_PURPLE     0x9930  // #992380
-
 #ifndef COLOR_BACKGROUND
-  #define COLOR_BACKGROUND    0x20AC  // #1E156E
+  #define COLOR_BACKGROUND        COLOR_MIDNIGHT_BLUE
 #endif
 #ifndef COLOR_SELECTION_BG
-  #define COLOR_SELECTION_BG  0x9930  // #992380
+  #define COLOR_SELECTION_BG      COLOR_DARK_PURPLE
 #endif
 #ifndef COLOR_WEBSITE_URL
-  #define COLOR_WEBSITE_URL   0x03B7  // #0075BD
+  #define COLOR_WEBSITE_URL       COLOR_OCEAN_BOAT_BLUE
 #endif
 
 #ifndef COLOR_INACTIVE
   #define COLOR_INACTIVE          COLOR_GREY
 #endif
 #ifndef COLOR_COLD
-  #define COLOR_COLD              COLOR_AQUA
+  #define COLOR_COLD              COLOR_CYAN
 #endif
 #ifndef COLOR_HOTEND
   #define COLOR_HOTEND            COLOR_SCARLET
@@ -99,7 +97,7 @@
   #define COLOR_COOLER            COLOR_DARK_ORANGE
 #endif
 #ifndef COLOR_FAN
-  #define COLOR_FAN               COLOR_AQUA
+  #define COLOR_FAN               COLOR_CYAN
 #endif
 
 #ifndef COLOR_AXIS_HOMED
@@ -117,7 +115,7 @@
 #endif
 
 #ifndef COLOR_PRINT_TIME
-  #define COLOR_PRINT_TIME        COLOR_AQUA
+  #define COLOR_PRINT_TIME        COLOR_CYAN
 #endif
 
 #ifndef COLOR_PROGRESS_FRAME
diff --git a/Marlin/src/module/motion.cpp b/Marlin/src/module/motion.cpp
index 24627cd49e23..3a6d98238858 100644
--- a/Marlin/src/module/motion.cpp
+++ b/Marlin/src/module/motion.cpp
@@ -577,7 +577,9 @@ void _internal_move_to_destination(const_feedRate_t fr_mm_s/*=0.0f*/
  */
 void do_blocking_move_to(NUM_AXIS_ARGS_(const_float_t) const_feedRate_t fr_mm_s/*=0.0f*/) {
   DEBUG_SECTION(log_move, "do_blocking_move_to", DEBUGGING(LEVELING));
-  if (DEBUGGING(LEVELING)) DEBUG_XYZ("> ", NUM_AXIS_ARGS());
+  #if NUM_AXES
+    if (DEBUGGING(LEVELING)) DEBUG_XYZ("> ", NUM_AXIS_ARGS());
+  #endif
 
   const feedRate_t xy_feedrate = fr_mm_s ?: feedRate_t(XY_PROBE_FEEDRATE_MM_S);
 
diff --git a/buildroot/tests/LPC1768 b/buildroot/tests/LPC1768
index 52769d2967e1..53fc6f6d7fdc 100755
--- a/buildroot/tests/LPC1768
+++ b/buildroot/tests/LPC1768
@@ -47,7 +47,7 @@ opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER ADAPTIVE_FAN_SLOWING TE
            BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET EP_BABYSTEPPING BABYSTEP_GFX_OVERLAY \
            PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT \
            Z_SAFE_HOMING ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE \
-           HOST_KEEPALIVE_FEATURE HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT \
+           HOST_KEEPALIVE_FEATURE HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT HOST_STATUS_NOTIFICATIONS \
            LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES \
            SDSUPPORT SDCARD_SORT_ALPHA AUTO_REPORT_SD_STATUS EMERGENCY_PARSER SOFT_RESET_ON_KILL SOFT_RESET_VIA_SERIAL
 exec_test $1 $2 "Re-ARM with NOZZLE_AS_PROBE and many features." "$3"
diff --git a/buildroot/tests/STM32F103RE_creality b/buildroot/tests/STM32F103RE_creality
index bf56e12d7de6..9115d62d1b61 100755
--- a/buildroot/tests/STM32F103RE_creality
+++ b/buildroot/tests/STM32F103RE_creality
@@ -27,7 +27,7 @@ use_example_configs "Creality/Ender-3 S1/STM32F1"
 opt_disable DWIN_CREALITY_LCD Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN AUTO_BED_LEVELING_BILINEAR CANCEL_OBJECTS FWRETRACT
 opt_enable DWIN_LCD_PROUI INDIVIDUAL_AXIS_HOMING_SUBMENU SET_PROGRESS_MANUALLY SET_PROGRESS_PERCENT STATUS_MESSAGE_SCROLLING \
            SOUND_MENU_ITEM PRINTCOUNTER NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE FILAMENT_RUNOUT_SENSOR \
-           BLTOUCH Z_SAFE_HOMING AUTO_BED_LEVELING_UBL MESH_EDIT_MENU \
+           BLTOUCH Z_SAFE_HOMING AUTO_BED_LEVELING_UBL MESH_EDIT_MENU LCD_BED_TRAMMING \
            LIMITED_MAX_FR_EDITING LIMITED_MAX_ACCEL_EDITING LIMITED_JERK_EDITING BAUD_RATE_GCODE
 opt_set PREHEAT_3_LABEL '"CUSTOM"' PREHEAT_3_TEMP_HOTEND 240 PREHEAT_3_TEMP_BED 60 PREHEAT_3_FAN_SPEED 128 BOOTSCREEN_TIMEOUT 1100
 exec_test $1 $2 "Ender-3 S1 - ProUI (PIDTEMP)" "$3"
diff --git a/buildroot/tests/rambo b/buildroot/tests/rambo
index c0784b95a055..d977fe1b429f 100755
--- a/buildroot/tests/rambo
+++ b/buildroot/tests/rambo
@@ -35,7 +35,7 @@ opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER LCD_PROGRESS_BAR LCD_PROGRESS_BAR_TE
            PSU_CONTROL LED_POWEROFF_TIMEOUT PS_OFF_CONFIRM PS_OFF_SOUND POWER_OFF_WAIT_FOR_COOLDOWN \
            POWER_LOSS_RECOVERY POWER_LOSS_PIN POWER_LOSS_STATE POWER_LOSS_RECOVER_ZHOME POWER_LOSS_ZHOME_POS \
            SLOW_PWM_HEATERS THERMAL_PROTECTION_CHAMBER LIN_ADVANCE ADVANCE_K_EXTRA \
-           HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT PINS_DEBUGGING MAX7219_DEBUG M114_DETAIL
+           HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT HOST_STATUS_NOTIFICATIONS PINS_DEBUGGING MAX7219_DEBUG M114_DETAIL
 opt_add DEBUG_POWER_LOSS_RECOVERY
 exec_test $1 $2 "RAMBO | EXTRUDERS 2 | CHAR LCD + SD | FIX Probe | ABL-Linear | Advanced Pause | PLR | LEDs ..." "$3"
 
@@ -129,7 +129,7 @@ opt_enable COREYX MIXING_EXTRUDER GRADIENT_MIX \
            FIX_MOUNTED_PROBE PROBING_ESTEPPERS_OFF PROBE_OFFSET_WIZARD \
            AUTO_BED_LEVELING_BILINEAR X_AXIS_TWIST_COMPENSATION MESH_EDIT_MENU DEBUG_LEVELING_FEATURE G26_MESH_VALIDATION \
            Z_SAFE_HOMING SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER \
-           SD_ABORT_ON_ENDSTOP_HIT HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT HOST_PAUSE_M76 ADVANCED_OK M114_DETAIL \
+           SD_ABORT_ON_ENDSTOP_HIT HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT HOST_STATUS_NOTIFICATIONS HOST_PAUSE_M76 ADVANCED_OK M114_DETAIL \
            VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS EXTRA_FAN_SPEED FWRETRACT \
            USE_CONTROLLER_FAN CONTROLLER_FAN_EDITABLE CONTROLLER_FAN_USE_Z_ONLY
 opt_disable DISABLE_OTHER_EXTRUDERS
diff --git a/buildroot/tests/teensy31 b/buildroot/tests/teensy31
index 5f5b84e0c4d1..5043bb9644de 100755
--- a/buildroot/tests/teensy31
+++ b/buildroot/tests/teensy31
@@ -32,5 +32,5 @@ opt_enable EEPROM_SETTINGS FILAMENT_WIDTH_SENSOR CALIBRATION_GCODE BAUD_RATE_GCO
            NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE PARK_HEAD_ON_PAUSE \
            ARC_SUPPORT BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES \
            PHOTO_GCODE PHOTO_POSITION PHOTO_SWITCH_POSITION PHOTO_SWITCH_MS PHOTO_DELAY_MS PHOTO_RETRACT_MM \
-           HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT
+           HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT HOST_STATUS_NOTIFICATIONS
 exec_test $1 $2 "Teensy3.1 with many features" "$3"
diff --git a/buildroot/tests/teensy35 b/buildroot/tests/teensy35
index 38da97c25b11..959a207aeeae 100755
--- a/buildroot/tests/teensy35
+++ b/buildroot/tests/teensy35
@@ -28,7 +28,7 @@ opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT SDCARD_SORT_A
            PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT M100_FREE_MEMORY_WATCHER \
            ADVANCED_PAUSE_FEATURE ARC_SUPPORT BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES PARK_HEAD_ON_PAUSE \
            PHOTO_GCODE PHOTO_POSITION PHOTO_SWITCH_POSITION PHOTO_SWITCH_MS PHOTO_DELAY_MS PHOTO_RETRACT_MM \
-           HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT
+           HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT HOST_STATUS_NOTIFICATIONS
 exec_test $1 $2 "Teensy3.5 with many features" "$3"
 
 #
diff --git a/buildroot/tests/teensy41 b/buildroot/tests/teensy41
index e6a769c28273..894abc15b97d 100755
--- a/buildroot/tests/teensy41
+++ b/buildroot/tests/teensy41
@@ -28,7 +28,7 @@ opt_enable MAX31865_SENSOR_OHMS_0 MAX31865_CALIBRATION_OHMS_0 \
            PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT \
            ADVANCED_PAUSE_FEATURE ARC_SUPPORT BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES PARK_HEAD_ON_PAUSE \
            PHOTO_GCODE PHOTO_POSITION PHOTO_SWITCH_POSITION PHOTO_SWITCH_MS PHOTO_DELAY_MS PHOTO_RETRACT_MM \
-           HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT
+           HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT HOST_STATUS_NOTIFICATIONS
 opt_add EXTUI_EXAMPLE
 exec_test $1 $2 "Teensy4.1 with many features" "$3"