DO NOT USE THIS ANYMORE!

This is only here for refference. please use:

Socket version

---

dwc2-for-klipper

A translator between DWC2 and Klipper

What works

• printing from Klipper's virtual sdcard
• pause / cancel prints (resume?)
• babystepping feature using Klipper's SET_GCODE_OFFSET Z_ADJUST
• editing Klipper's configuration. Its displayed as config.g in system section. So the web interface restarts Klipper after saving.
• Klipper macros are imported as virtual files and can be accesed from the dashboard
• uploads and downloads of gcodes
• gcode analysis using regex to determine duration / layerhight / firstlayer / filamentusage and others
• the math for printtime left based on whatever, showing layerhistory, detecting layerchanges etc. (needs working slicer regex)
• settings of web interface are saved and loaded correctly
• homing / extruding / moving
• heater control
• setting fanspeed / extrusionmultiplier / speedfactor during print in status window
• heightmap is working (needs manual BED_MESH_CALIBATE). It is kept only for displaying, even after BED_MESH_CLEAR
• webcam integration works now
  • with mjpeg-streamer add the streaming URL to settings; example: http://192.168.2.20:8080/?action=stream
  • With YouTube Live; example: https://webcam.io/support/howto-embed-youtube-live/
• pause/resume/cancel macros are working now - see Things You Should Know below
• plugin for Cura 4.0 does work, just enter URL; for example: http://192.168.2.188:4750/

What is not working

• webcam integration
• heightmap
• printsimulation
• actual machinespeed, only displaying the requested values
  • klipper does not have this feedback (yet)? due to its lookahead feature
  • can we calc this? movelength/junction/acceleration is there
• cancel/pause/resume macros. I will do this soon
• rrf/dwc cura plugin
• ...

Things you should know

• Klipper messages are marked as warnings (yellow).
  • Normaly Klipper knows ok and error
• Klipper's printer.cfg is displayed as a virtual file (config.g) in system section
  • restart after configuration edits works
• The macros you define in printer.cfg are displayed as virtual files wthin DWC's macros
• For pause and resume macros you can use:
  • Klipper gcode macros pause_print, resume_print, cancel_print (not case sensitive)
  • DWC macros pause.g, resume.g, cancel.g - this is in line with RRF
  • DWC macros are overriding Klipper's macros
• ...

Installation

Prerequisites

Python 2, Tornado, gunzip, unzip and wget.

On ArchLinux:

sudo pacman -Syu python2 python2-tornado wget gzip

Maybe you´ll need to change the startup system for Klipper to access ~/klipper/klippy/klippy.py.

On Debian-based systems such as Octopi or Ubuntu:

I asume here that you used the Octopi install script from Kevin's GitHub repository.

sudo apt install wget gzip tar

Then switch to your klipper user and:

sudo systemctl stop klipper
cd ~
mv klipper klipper_backup 
PYTHONDIR="${HOME}/klippy-env"
virtualenv ${PYTHONDIR}
${PYTHONDIR}/bin/pip install tornado==5.1.1

git clone https://github.com/KevinOConnor/klipper.git
git clone https://github.com/Stephan3/dwc2-for-klipper.git
ln -s ~/dwc2-for-klipper/web_dwc2.py ~/klipper/klippy/extras/web_dwc2.py

mkdir -p ~/sdcard/dwc2/web
mkdir -p ~/sdcard/sys
cd ~/sdcard/dwc2/web 
wget https://github.com/Duet3D/DuetWebControl/releases/download/3.1.1/DuetWebControl-SD.zip
unzip *.zip && for f_ in $(find . | grep '.gz');do gunzip ${f_};done
sudo systemctl start klipper

If you want backwards compatibility to DWC1:

cd ~/sdcard/dwc2/web 
wget https://github.com/chrishamm/DuetWebControl/releases/download/1.22.5/DuetWebControl-1.22.5.zip
unzip DuetWebContro*.zip
for f_ in $(find . | grep '.gz');do gunzip ${f_};done

Klipper config example:

[virtual_sdcard]
path: /home/pi/sdcard

[web_dwc2]
# optional - defaulting to Klipper
printer_name: Reiner Calmund
# optional - defaulting to 127.0.0.1
listen_adress: 0.0.0.0
# needed - use above 1024 as nonroot
listen_port: 4750
#	optional defaulting to dwc2/web. Its a folder relative to your virtual sdcard.
web_path: dwc2/web