From 65ff80a687c6451d3db3242b0647ce488183eee4 Mon Sep 17 00:00:00 2001 From: Thomas Date: Sat, 27 Jan 2024 04:56:14 +0100 Subject: [PATCH] Fixes 3833 ("Miss spelling") (#3840) --- localization/i18n/OrcaSlicer.pot | 2 +- localization/i18n/cs/OrcaSlicer_cs.po | 2 +- localization/i18n/de/OrcaSlicer_de.po | 2 +- localization/i18n/en/OrcaSlicer_en.po | 2 +- localization/i18n/es/OrcaSlicer_es.po | 2 +- localization/i18n/fr/OrcaSlicer_fr.po | 2 +- localization/i18n/hu/OrcaSlicer_hu.po | 2 +- localization/i18n/it/OrcaSlicer_it.po | 2 +- localization/i18n/ja/OrcaSlicer_ja.po | 2 +- localization/i18n/ko/OrcaSlicer_ko.po | 2 +- localization/i18n/nl/OrcaSlicer_nl.po | 2 +- localization/i18n/ru/OrcaSlicer_ru.po | 2 +- localization/i18n/sv/OrcaSlicer_sv.po | 2 +- localization/i18n/tr/OrcaSlicer_tr.po | 2 +- localization/i18n/uk/OrcaSlicer_uk.po | 2 +- localization/i18n/zh_CN/OrcaSlicer_zh_CN.po | 2 +- localization/i18n/zh_TW/OrcaSlicer_zh_TW.po | 2 +- src/libslic3r/PrintConfig.cpp | 2 +- 18 files changed, 18 insertions(+), 18 deletions(-) diff --git a/localization/i18n/OrcaSlicer.pot b/localization/i18n/OrcaSlicer.pot index 46d08da724d..d15c368abc4 100644 --- a/localization/i18n/OrcaSlicer.pot +++ b/localization/i18n/OrcaSlicer.pot @@ -8261,7 +8261,7 @@ msgid "" "value. This can be useful to not let the 'one perimeter on top' trigger on " "surface that should be covered only by perimeters. This value can be a mm or " "a % of the perimeter extrusion width.\n" -"Warning: If enabled, artifacts can be created is you have some thin features " +"Warning: If enabled, artifacts can be created if you have some thin features " "on the next layer, like letters. Set this setting to 0 to remove these " "artifacts." msgstr "" diff --git a/localization/i18n/cs/OrcaSlicer_cs.po b/localization/i18n/cs/OrcaSlicer_cs.po index 92dd1685319..ed675a6f58a 100644 --- a/localization/i18n/cs/OrcaSlicer_cs.po +++ b/localization/i18n/cs/OrcaSlicer_cs.po @@ -8829,7 +8829,7 @@ msgid "" "value. This can be useful to not let the 'one perimeter on top' trigger on " "surface that should be covered only by perimeters. This value can be a mm or " "a % of the perimeter extrusion width.\n" -"Warning: If enabled, artifacts can be created is you have some thin features " +"Warning: If enabled, artifacts can be created if you have some thin features " "on the next layer, like letters. Set this setting to 0 to remove these " "artifacts." msgstr "" diff --git a/localization/i18n/de/OrcaSlicer_de.po b/localization/i18n/de/OrcaSlicer_de.po index 203a0cbdd2d..126be15362c 100644 --- a/localization/i18n/de/OrcaSlicer_de.po +++ b/localization/i18n/de/OrcaSlicer_de.po @@ -9145,7 +9145,7 @@ msgid "" "value. This can be useful to not let the 'one perimeter on top' trigger on " "surface that should be covered only by perimeters. This value can be a mm or " "a % of the perimeter extrusion width.\n" -"Warning: If enabled, artifacts can be created is you have some thin features " +"Warning: If enabled, artifacts can be created if you have some thin features " "on the next layer, like letters. Set this setting to 0 to remove these " "artifacts." msgstr "" diff --git a/localization/i18n/en/OrcaSlicer_en.po b/localization/i18n/en/OrcaSlicer_en.po index d3cbac6f5ec..c9b57ecdf27 100644 --- a/localization/i18n/en/OrcaSlicer_en.po +++ b/localization/i18n/en/OrcaSlicer_en.po @@ -8670,7 +8670,7 @@ msgid "" "value. This can be useful to not let the 'one perimeter on top' trigger on " "surface that should be covered only by perimeters. This value can be a mm or " "a % of the perimeter extrusion width.\n" -"Warning: If enabled, artifacts can be created is you have some thin features " +"Warning: If enabled, artifacts can be created if you have some thin features " "on the next layer, like letters. Set this setting to 0 to remove these " "artifacts." msgstr "" diff --git a/localization/i18n/es/OrcaSlicer_es.po b/localization/i18n/es/OrcaSlicer_es.po index db584e4c6f3..b6984db7da5 100644 --- a/localization/i18n/es/OrcaSlicer_es.po +++ b/localization/i18n/es/OrcaSlicer_es.po @@ -9042,7 +9042,7 @@ msgid "" "value. This can be useful to not let the 'one perimeter on top' trigger on " "surface that should be covered only by perimeters. This value can be a mm or " "a % of the perimeter extrusion width.\n" -"Warning: If enabled, artifacts can be created is you have some thin features " +"Warning: If enabled, artifacts can be created if you have some thin features " "on the next layer, like letters. Set this setting to 0 to remove these " "artifacts." msgstr "" diff --git a/localization/i18n/fr/OrcaSlicer_fr.po b/localization/i18n/fr/OrcaSlicer_fr.po index 3467e433d20..a1253d97ced 100644 --- a/localization/i18n/fr/OrcaSlicer_fr.po +++ b/localization/i18n/fr/OrcaSlicer_fr.po @@ -9191,7 +9191,7 @@ msgid "" "value. This can be useful to not let the 'one perimeter on top' trigger on " "surface that should be covered only by perimeters. This value can be a mm or " "a % of the perimeter extrusion width.\n" -"Warning: If enabled, artifacts can be created is you have some thin features " +"Warning: If enabled, artifacts can be created if you have some thin features " "on the next layer, like letters. Set this setting to 0 to remove these " "artifacts." msgstr "" diff --git a/localization/i18n/hu/OrcaSlicer_hu.po b/localization/i18n/hu/OrcaSlicer_hu.po index d6ab001e412..02c180a1d13 100644 --- a/localization/i18n/hu/OrcaSlicer_hu.po +++ b/localization/i18n/hu/OrcaSlicer_hu.po @@ -8741,7 +8741,7 @@ msgid "" "value. This can be useful to not let the 'one perimeter on top' trigger on " "surface that should be covered only by perimeters. This value can be a mm or " "a % of the perimeter extrusion width.\n" -"Warning: If enabled, artifacts can be created is you have some thin features " +"Warning: If enabled, artifacts can be created if you have some thin features " "on the next layer, like letters. Set this setting to 0 to remove these " "artifacts." msgstr "" diff --git a/localization/i18n/it/OrcaSlicer_it.po b/localization/i18n/it/OrcaSlicer_it.po index 7555b3dd678..988df8e5911 100644 --- a/localization/i18n/it/OrcaSlicer_it.po +++ b/localization/i18n/it/OrcaSlicer_it.po @@ -9048,7 +9048,7 @@ msgid "" "value. This can be useful to not let the 'one perimeter on top' trigger on " "surface that should be covered only by perimeters. This value can be a mm or " "a % of the perimeter extrusion width.\n" -"Warning: If enabled, artifacts can be created is you have some thin features " +"Warning: If enabled, artifacts can be created if you have some thin features " "on the next layer, like letters. Set this setting to 0 to remove these " "artifacts." msgstr "" diff --git a/localization/i18n/ja/OrcaSlicer_ja.po b/localization/i18n/ja/OrcaSlicer_ja.po index a1baa54ec08..d3568b03619 100644 --- a/localization/i18n/ja/OrcaSlicer_ja.po +++ b/localization/i18n/ja/OrcaSlicer_ja.po @@ -8493,7 +8493,7 @@ msgid "" "value. This can be useful to not let the 'one perimeter on top' trigger on " "surface that should be covered only by perimeters. This value can be a mm or " "a % of the perimeter extrusion width.\n" -"Warning: If enabled, artifacts can be created is you have some thin features " +"Warning: If enabled, artifacts can be created if you have some thin features " "on the next layer, like letters. Set this setting to 0 to remove these " "artifacts." msgstr "" diff --git a/localization/i18n/ko/OrcaSlicer_ko.po b/localization/i18n/ko/OrcaSlicer_ko.po index f3e48debd06..c14f7a07396 100644 --- a/localization/i18n/ko/OrcaSlicer_ko.po +++ b/localization/i18n/ko/OrcaSlicer_ko.po @@ -8735,7 +8735,7 @@ msgid "" "value. This can be useful to not let the 'one perimeter on top' trigger on " "surface that should be covered only by perimeters. This value can be a mm or " "a % of the perimeter extrusion width.\n" -"Warning: If enabled, artifacts can be created is you have some thin features " +"Warning: If enabled, artifacts can be created if you have some thin features " "on the next layer, like letters. Set this setting to 0 to remove these " "artifacts." msgstr "" diff --git a/localization/i18n/nl/OrcaSlicer_nl.po b/localization/i18n/nl/OrcaSlicer_nl.po index 9a5da3997f9..f45c1e8fe52 100644 --- a/localization/i18n/nl/OrcaSlicer_nl.po +++ b/localization/i18n/nl/OrcaSlicer_nl.po @@ -8823,7 +8823,7 @@ msgid "" "value. This can be useful to not let the 'one perimeter on top' trigger on " "surface that should be covered only by perimeters. This value can be a mm or " "a % of the perimeter extrusion width.\n" -"Warning: If enabled, artifacts can be created is you have some thin features " +"Warning: If enabled, artifacts can be created if you have some thin features " "on the next layer, like letters. Set this setting to 0 to remove these " "artifacts." msgstr "" diff --git a/localization/i18n/ru/OrcaSlicer_ru.po b/localization/i18n/ru/OrcaSlicer_ru.po index 496ef2ade21..7736ba2533c 100644 --- a/localization/i18n/ru/OrcaSlicer_ru.po +++ b/localization/i18n/ru/OrcaSlicer_ru.po @@ -8974,7 +8974,7 @@ msgid "" "value. This can be useful to not let the 'one perimeter on top' trigger on " "surface that should be covered only by perimeters. This value can be a mm or " "a % of the perimeter extrusion width.\n" -"Warning: If enabled, artifacts can be created is you have some thin features " +"Warning: If enabled, artifacts can be created if you have some thin features " "on the next layer, like letters. Set this setting to 0 to remove these " "artifacts." msgstr "" diff --git a/localization/i18n/sv/OrcaSlicer_sv.po b/localization/i18n/sv/OrcaSlicer_sv.po index 70bbf52d3b4..86134d17612 100644 --- a/localization/i18n/sv/OrcaSlicer_sv.po +++ b/localization/i18n/sv/OrcaSlicer_sv.po @@ -8686,7 +8686,7 @@ msgid "" "value. This can be useful to not let the 'one perimeter on top' trigger on " "surface that should be covered only by perimeters. This value can be a mm or " "a % of the perimeter extrusion width.\n" -"Warning: If enabled, artifacts can be created is you have some thin features " +"Warning: If enabled, artifacts can be created if you have some thin features " "on the next layer, like letters. Set this setting to 0 to remove these " "artifacts." msgstr "" diff --git a/localization/i18n/tr/OrcaSlicer_tr.po b/localization/i18n/tr/OrcaSlicer_tr.po index c96a526e7fd..709b3d717db 100644 --- a/localization/i18n/tr/OrcaSlicer_tr.po +++ b/localization/i18n/tr/OrcaSlicer_tr.po @@ -8916,7 +8916,7 @@ msgid "" "value. This can be useful to not let the 'one perimeter on top' trigger on " "surface that should be covered only by perimeters. This value can be a mm or " "a % of the perimeter extrusion width.\n" -"Warning: If enabled, artifacts can be created is you have some thin features " +"Warning: If enabled, artifacts can be created if you have some thin features " "on the next layer, like letters. Set this setting to 0 to remove these " "artifacts." msgstr "" diff --git a/localization/i18n/uk/OrcaSlicer_uk.po b/localization/i18n/uk/OrcaSlicer_uk.po index 01d4f7e134d..a625c4e570b 100644 --- a/localization/i18n/uk/OrcaSlicer_uk.po +++ b/localization/i18n/uk/OrcaSlicer_uk.po @@ -8752,7 +8752,7 @@ msgid "" "value. This can be useful to not let the 'one perimeter on top' trigger on " "surface that should be covered only by perimeters. This value can be a mm or " "a % of the perimeter extrusion width.\n" -"Warning: If enabled, artifacts can be created is you have some thin features " +"Warning: If enabled, artifacts can be created if you have some thin features " "on the next layer, like letters. Set this setting to 0 to remove these " "artifacts." msgstr "" diff --git a/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po b/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po index 9d5c7c671b0..f68244f8469 100644 --- a/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po +++ b/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po @@ -8444,7 +8444,7 @@ msgid "" "value. This can be useful to not let the 'one perimeter on top' trigger on " "surface that should be covered only by perimeters. This value can be a mm or " "a % of the perimeter extrusion width.\n" -"Warning: If enabled, artifacts can be created is you have some thin features " +"Warning: If enabled, artifacts can be created if you have some thin features " "on the next layer, like letters. Set this setting to 0 to remove these " "artifacts." msgstr "" diff --git a/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po b/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po index 94d5e45eb79..bc6238f7967 100644 --- a/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po +++ b/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po @@ -8898,7 +8898,7 @@ msgid "" "value. This can be useful to not let the 'one perimeter on top' trigger on " "surface that should be covered only by perimeters. This value can be a mm or " "a % of the perimeter extrusion width.\n" -"Warning: If enabled, artifacts can be created is you have some thin features " +"Warning: If enabled, artifacts can be created if you have some thin features " "on the next layer, like letters. Set this setting to 0 to remove these " "artifacts." msgstr "" diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp index 9843e1e83c8..5bff9c7285e 100644 --- a/src/libslic3r/PrintConfig.cpp +++ b/src/libslic3r/PrintConfig.cpp @@ -905,7 +905,7 @@ void PrintConfigDef::init_fff_params() def->tooltip = L("If a top surface has to be printed and it's partially covered by another layer, it won't be considered at a top layer where its width is below this value." " This can be useful to not let the 'one perimeter on top' trigger on surface that should be covered only by perimeters." " This value can be a mm or a % of the perimeter extrusion width." - "\nWarning: If enabled, artifacts can be created is you have some thin features on the next layer, like letters. Set this setting to 0 to remove these artifacts."); + "\nWarning: If enabled, artifacts can be created if you have some thin features on the next layer, like letters. Set this setting to 0 to remove these artifacts."); def->sidetext = L("mm or %"); def->ratio_over = "inner_wall_line_width"; def->min = 0;