From 2372f61ca0799f748665553b922977ae42818992 Mon Sep 17 00:00:00 2001 From: Andras Lasso Date: Mon, 25 Nov 2024 12:43:48 -0500 Subject: [PATCH] Specify "tier" for each extension By default, Tier 3 is assigned to all extensions. See exceptions and rationale is below. ## Tier 5: Extensions of high importance: - DCMQI - DebuggingTools - DeveloperToolsForExtensions - DICOMwebBrowser - LanguagePacks - MarkupsToModel - MONAIAuto3DSeg - NNUNet - ParallelProcessing - PyTorch - QuantitativeReporting - SegmentEditorExtraEffects - SegmentMesher - SequenceRegistration - SlicerDcm2nii - SlicerDMRI - SlicerElastix - SlicerFreeSurfer - SlicerHeart - SlicerIGSIO - SlicerIGT - SlicerMorph - SlicerNeuro - SlicerOpenAnatomy - SlicerOpenIGTLink - SlicerRT - SlicerVirtualReality - SlicerVMTK - SurfaceWrapSolidify - TotalSegmentator - UKFTractography ## Tier 1: ### No maintainer/no response to issues in issue tracker: - ABLTemporalBoneSegmentation - AirwaySegmentation - BoneThicknessMapping - Breast_DCEMRI_FTV (https://github.com/radiology-research/SlicerBreast_DCEMRI_FTV/issues/7 without response) - DRRGenerator - CarreraSlice - CleverSeg - ModelClip (upstream did not respond to a PR with a minor update to fix an extension icon issue) - NeedleFinder - NvidiaAIAssistedAnnotation - RegularizedFastMarching - ResectionPlanner - Scoliosis - SegmentationAidedRegistration - SlicerITKUltrasound (failing to build across all platforms) - SlicerToKiwiExporter - TOMAAT - ChangeTracker (Andrey Fedorov confirmed that he no longer provides support) ### Experimental: - BigImage - SlicerAIGT ### Functionality is no longer needed or useful for very few users: - AnglePlanesExtension (tool in Q3DC now) - DatabaseInteractor - ErodeDilateLabel - MeshToLabelMap - CurveMaker (built-in markups feature now) - SlicerConda ### Commercial license is needed for meaningful use: - ConnectToSupervisely - flywheel_connect - FlywheelCaseIterator ### Too broad name that would mislead users - IntensitySegmenter - TissueSegmentation ### Build errors - SlicerLookingGlass - SlicerRadiomics - SlicerDentalModelSeg (only works on linux) --- .github/PULL_REQUEST_TEMPLATE.md | 49 ++++++++++++++++++++++++------ .pre-commit-config.yaml | 2 +- ABLTemporalBoneSegmentation.json | 5 +-- AblationPlanner.json | 5 +-- AirwaySegmentation.json | 5 +-- AnglePlanesExtension.json | 5 +-- AnomalousFiltersExtension.json | 5 +-- ArduinoController.json | 5 +-- AstmPhantomTest.json | 5 +-- Auto3dgm.json | 5 +-- AutomatedDentalTools.json | 5 +-- Autoscroll.json | 5 +-- BigImage.json | 5 +-- BoneReconstructionPlanner.json | 5 +-- BoneTextureExtension.json | 5 +-- BoneThicknessMapping.json | 5 +-- BrainVolumeRefinement.json | 5 +-- BreastImplantAnalyzer.json | 5 +-- BreastUltrasoundAnalysis.json | 5 +-- Breast_DCEMRI_FTV.json | 5 +-- CBCTToothSegmentation.json | 5 +-- CMFreg.json | 5 +-- CarreraSlice.json | 5 +-- ChangeTracker.json | 5 +-- Chest_Imaging_Platform.json | 5 +-- CleverSeg.json | 5 +-- ColocZStats.json | 5 +-- ConnectToSupervisely.json | 5 +-- CurveMaker.json | 5 +-- DCMQI.json | 5 +-- DICOMwebBrowser.json | 5 +-- DRRGenerator.json | 5 +-- DSCMRIAnalysis.json | 5 +-- DatabaseInteractor.json | 5 +-- DebuggingTools.json | 5 +-- DensityLungSegmentation.json | 5 +-- DentalSegmentator.json | 5 +-- DeveloperToolsForExtensions.json | 5 +-- DiffusionQC.json | 5 +-- EasyClip.json | 5 +-- ErodeDilateLabel.json | 5 +-- ExtraMarkups.json | 5 +-- FiducialsToModelDistance.json | 5 +-- FilmDosimetryAnalysis.json | 5 +-- FlywheelCaseIterator.json | 5 +-- GelDosimetryAnalysis.json | 5 +-- GeodesicSlicer.json | 5 +-- GyroGuide.json | 5 +-- HDBrainExtraction.json | 5 +-- IDCBrowser.json | 5 +-- ImageAugmenter.json | 5 +-- ImageCompare.json | 5 +-- ImageMaker.json | 5 +-- IntensitySegmenter.json | 5 +-- KidneyStoneCalculator.json | 5 +-- LanguagePacks.json | 5 +-- LesionSimulator.json | 5 +-- LesionSpotlight.json | 5 +-- LungCTAnalyzer.json | 5 +-- MEMOS.json | 5 +-- MHubRunner.json | 5 +-- MONAIAuto3DSeg.json | 5 +-- MONAILabel.json | 5 +-- MONAIViz.json | 5 +-- MRUSLandmarking.json | 5 +-- MarkupsToModel.json | 5 +-- MassVision.json | 5 +-- MatlabBridge.json | 5 +-- MedialSkeleton.json | 5 +-- MeshStatisticsExtension.json | 5 +-- MeshToLabelMap.json | 5 +-- ModelClip.json | 5 +-- ModelCropper.json | 5 +-- ModelToModelDistance.json | 5 +-- NNUNet.json | 5 +-- NeedleFinder.json | 5 +-- NvidiaAIAssistedAnnotation.json | 5 +-- OpenDose3D.json | 5 +-- OrthodonticAnalysis.json | 5 +-- OsteotomyPlanner.json | 5 +-- PBNRR.json | 5 +-- PET-IndiC.json | 5 +-- PET-MUST-Segmenter.json | 5 +-- PETCPhantom.json | 5 +-- PETDICOMExtension.json | 5 +-- PETLiverUptakeMeasurement.json | 5 +-- PETTumorSegmentation.json | 5 +-- ParallelProcessing.json | 5 +-- PathReconstruction.json | 5 +-- PedicleScrewSimulator.json | 5 +-- PercutaneousApproachAnalysis.json | 5 +-- PerkTutor.json | 5 +-- PetSpectAnalysis.json | 5 +-- PickAndPaintExtension.json | 5 +-- Pipelines.json | 5 +-- PkModeling.json | 5 +-- PortPlacement.json | 5 +-- PyTorch.json | 5 +-- Q3DC.json | 5 +-- QuantitativeReporting.json | 5 +-- README.md | 26 +++++++++------- RVXLiverSegmentation.json | 5 +-- RVXVesselnessFilters.json | 5 +-- RawImageGuess.json | 5 +-- RegistrationQA.json | 5 +-- RegularizedFastMarching.json | 5 +-- ResectionPlanner.json | 5 +-- SNRMeasurement.json | 5 +-- SPHARM-PDM.json | 5 +-- Sandbox.json | 5 +-- ScatteredTransform.json | 5 +-- Scoliosis.json | 5 +-- ScriptEditor.json | 5 +-- SegmentEditorExtraEffects.json | 5 +-- SegmentMesher.json | 5 +-- SegmentRegistration.json | 5 +-- SegmentWithSAM.json | 5 +-- SegmentationAidedRegistration.json | 5 +-- SegmentationReview.json | 5 +-- SegmentationVerification.json | 5 +-- SequenceRegistration.json | 5 +-- ShapePopulationViewer.json | 5 +-- ShapeRegressionExtension.json | 5 +-- ShapeVariationAnalyzer.json | 5 +-- SkeletalRepresentation.json | 5 +-- SkinMouldGenerator.json | 5 +-- SkullStripper.json | 5 +-- SlicerAIGT.json | 5 +-- SlicerANTs.json | 5 +-- SlicerAutoscoperM.json | 5 +-- SlicerBatchAnonymize.json | 5 +-- SlicerBiomech.json | 5 +-- SlicerCMF.json | 5 +-- SlicerCaseIterator.json | 5 +-- SlicerCervicalSpine.json | 5 +-- SlicerCineTrack.json | 5 +-- SlicerCochlea.json | 5 +-- SlicerConda.json | 5 +-- SlicerDMRI.json | 5 +-- SlicerDTIALPS.json | 5 +-- SlicerDcm2nii.json | 5 +-- SlicerDentalModelSeg.json | 5 +-- SlicerDevelopmentToolbox.json | 5 +-- SlicerDiffusionComplexityMap.json | 5 +-- SlicerElastix.json | 5 +-- SlicerFab.json | 5 +-- SlicerFreeSurfer.json | 5 +-- SlicerHeart.json | 5 +-- SlicerIGSIO.json | 5 +-- SlicerIGT.json | 5 +-- SlicerITKUltrasound.json | 5 +-- SlicerJupyter.json | 5 +-- SlicerLayoutButtons.json | 5 +-- SlicerLiver.json | 5 +-- SlicerLookingGlass.json | 5 +-- SlicerMarkupConstraints.json | 5 +-- SlicerMorph.json | 5 +-- SlicerNetstim.json | 5 +-- SlicerNeuro.json | 5 +-- SlicerNeuroSegmentation.json | 5 +-- SlicerOpenAnatomy.json | 5 +-- SlicerOpenIGTLink.json | 5 +-- SlicerPRISMRendering.json | 5 +-- SlicerProstate.json | 5 +-- SlicerProstateAblation.json | 5 +-- SlicerPythonTestRunner.json | 5 +-- SlicerRT.json | 5 +-- SlicerRadiomics.json | 5 +-- SlicerThemes.json | 5 +-- SlicerToKiwiExporter.json | 5 +-- SlicerVMTK.json | 5 +-- SlicerVirtualMouseCursor.json | 5 +-- SlicerVirtualReality.json | 5 +-- SlicerWMA.json | 5 +-- SoundControl.json | 5 +-- Stereotaxia.json | 5 +-- SurfaceFragmentsRegistration.json | 5 +-- SurfaceLearner.json | 5 +-- SurfaceMarkup.json | 5 +-- SurfaceWrapSolidify.json | 5 +-- SwissSkullStripper.json | 5 +-- T1Mapping.json | 5 +-- T1_ECVMapping.json | 5 +-- T2mapping.json | 5 +-- TCIABrowser.json | 5 +-- TITAN.json | 5 +-- TOMAAT.json | 5 +-- TissueSegmentation.json | 5 +-- TomoSAM.json | 5 +-- TorchIO.json | 5 +-- TotalSegmentator.json | 5 +-- TrackingErrorInspector.json | 5 +-- UHFMRTools.json | 5 +-- UKFTractography.json | 5 +-- Ultrasound.json | 5 +-- VASSTAlgorithms.json | 5 +-- VolumeClip.json | 5 +-- XNATSlicer.json | 5 +-- ZFrameRegistration.json | 5 +-- flywheel_connect.json | 5 +-- mpReview.json | 5 +-- 201 files changed, 649 insertions(+), 418 deletions(-) diff --git a/.github/PULL_REQUEST_TEMPLATE.md b/.github/PULL_REQUEST_TEMPLATE.md index ce8067fb5..45472bbf6 100644 --- a/.github/PULL_REQUEST_TEMPLATE.md +++ b/.github/PULL_REQUEST_TEMPLATE.md @@ -6,27 +6,56 @@ Thank you for contributing to 3D Slicer! # New extension - + + + +## Tier 1 + +Any extension that is listed in the Extensions Catalog must fulfill these requirements. - [ ] Extension has a reasonable name (not too general, not too narrow, suggests what the extension is for) -- [ ] Repository name is Slicer+ExtensionName +- [ ] Repository name is Slicer+ExtensionName (except if the repository that hosts the extension can be also used without Slicer) - [ ] Repository is associated with `3d-slicer-extension` GitHub topic so that it is listed [here](https://github.com/topics/3d-slicer-extension). To edit topics, click the settings icon in the right side of "About" section header and enter `3d-slicer-extension` in "Topics" and click "Save changes". To learn more about topics, read https://help.github.com/en/articles/about-topics - [ ] Extension description summarizes in 1-2 sentences what the extension is usable (should be understandable for non-experts) - [ ] Any known related patents must be mentioned in the extension description. -- [ ] LICENSE.txt is present in the repository root. MIT (https://choosealicense.com/licenses/mit/) or Apache (https://choosealicense.com/licenses/apache-2.0/) license is recommended. If source code license is more restrictive for users than MIT, BSD, Apache, or 3D Slicer license then the name of the used license must be mentioned in the extension description. +- [ ] LICENSE.txt is present in the repository root and the name of the license is mentioned in extension homepage. We suggest you use a permissive license that includes patent and contribution clauses. This will help protect developers and ensure the code remains freely available. MIT (https://choosealicense.com/licenses/mit/) or Apache (https://choosealicense.com/licenses/apache-2.0/) license is recommended. Read [here](https://opensource.guide/legal/#which-open-source-license-is-appropriate-for-my-project) to learn more about licenses. If source code license is more restrictive for users than MIT, BSD, Apache, or 3D Slicer license then describe the reason for the license choice and include the name of the used license in the extension description. - [ ] Extension URL and revision (scmurl, scmrevision) is correct, consider using a branch name (main, release, ...) instead of a specific git hash to avoid re-submitting pull request whenever the extension is updated - [ ] Extension icon URL is correct (do not use the icon's webpage but the raw data download URL that you get from the download button - it should look something like this: https://raw.githubusercontent.com/user/repo/main/SomeIcon.png) - [ ] Screenshot URLs (screenshoturls) are correct, contains at least one -- [ ] Homepage URL points to valid webpage containing the following: +- [ ] Content of submitted json file is consistent with the top-level CMakeLists.txt file in the repository (dependencies, etc. are the same) +- Homepage URL points to valid webpage containing the following: - [ ] Extension name - [ ] Short description: 1-2 sentences, which summarizes what the extension is usable for - [ ] At least one nice, informative image, that illustrates what the extension can do. It may be a screenshot. - [ ] Description of contained modules: at one sentence for each module - - [ ] Tutorial: step-by-step description of at least the most typical use case, include a few screenshots, provide download links to sample input data set - [ ] Publication: link to publication and/or to PubMed reference (if available) - - [ ] License: We suggest you use a permissive license that includes patent and contribution clauses. This will help protect developers and ensure the code remains freely available. We suggest you use the [Slicer License](https://github.com/Slicer/Slicer/blob/main/License.txt) or the [Apache 2.0](https://www.apache.org/licenses/LICENSE-2.0). Always mention in your README file the license you have chosen. If you choose a different license, explain why to the extension maintainers. Depending on the license we may not be able to host your work. Read [here](https://opensource.guide/legal/#which-open-source-license-is-appropriate-for-my-project) to learn more about licenses. - - [ ] Content of submitted json file is consistent with the top-level CMakeLists.txt file in the repository (dependencies, etc. are the same) -- Hide unused features in the repository to reduce noise/irrelevant information: - - [ ] Click `Settings` and in repository settings uncheck `Wiki`, `Projects`, and `Discussions` (if they are currently not used) +- Hide unused github features (such as Wiki, Projects, and Discussions, Releases, Packages) in the repository to reduce noise/irrelevant information: + - [ ] Click `Settings` and in repository settings uncheck `Wiki`, `Projects`, and `Discussions` (if they are currently not used). - [ ] Click the settings icon next to `About` in the top-right corner of the repository main page and uncheck `Releases` and `Packages` (if they are currently not used) - +- The extension is safe: + - [ ] Does not include or download binaries from unreliable sources + - [ ] Does not send any information anywhere without user consent (explicit opt-in is required) + +## Tier 3 + +Community-supported extensions. + +- [ ] Documentation, tutorial, and test data are provided for most modules. A tutorial provides step-by-step description of at least the most typical use case, include a few screenshots. Any sample data sets that is used in tutorials must be registered with the Sample Data module to provide easy access to the user. +- [ ] Follows programming and user interface conventions of 3D Slicer (e.g., GUI and logic are separated, usage of popups is minimized, no unnecessary custom GUI styling, etc.) +- [ ] The extension can be successfully built and packaged on all supported platforms (Windows, macOS, Linux) +- [ ] Maintainers respond to issues and pull request submitted to the extension's repository. +- [ ] Maintainers respond to questions directly addressed to him/her via @mention on the [Slicer Forum](https://discourse.slicer.org). +- [ ] Permissive license is used for the main functions of the extension (recommended Apache or MIT). The extension can provide additional functionality in optional components that are distributed with non-permissive license, but the user has to explicitly approve those before using them (e.g., a pop-up can be displayed that explains the licensing terms and the user has to acknowledge them to proceed). +- All requirements of tiers < 3. + +## Tier 5 + +Critically important extensions, supported by Slicer core developers. New Slicer Stable Release is released only if all Tier 5 extension packages are successfully created on all supported platforms. + +- [ ] Slicer core developers accept the responsibility of fixing any issues caused by Slicer core changes; at least one Slicer core developer (anyone who has commit right to Slicer core) must be granted commit right to the extension's repository. +- [ ] Automated tests for all critical features. +- [ ] Maintainers respond to questions related to the extension on the [Slicer Forum](https://discourse.slicer.org). +- All requirements of tiers < 5. + + diff --git a/.pre-commit-config.yaml b/.pre-commit-config.yaml index 3d90dd2bf..2ca0dbe00 100644 --- a/.pre-commit-config.yaml +++ b/.pre-commit-config.yaml @@ -33,7 +33,7 @@ repos: args: [ "--schemafile", - "http://cdn.jsdelivr.net/gh/Slicer/Slicer@main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json", + "http://cdn.jsdelivr.net/gh/Slicer/Slicer@main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json", ] - id: check-dependabot - id: check-github-workflows diff --git a/ABLTemporalBoneSegmentation.json b/ABLTemporalBoneSegmentation.json index afcb161d0..f431ad4ed 100644 --- a/ABLTemporalBoneSegmentation.json +++ b/ABLTemporalBoneSegmentation.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["SlicerElastix"], "build_subdirectory": "inner-build", "category": "Otolaryngology", "scm_revision": "master", - "scm_url": "https://github.com/Auditory-Biophysics-Lab/Slicer-ABLTemporalBoneSegmentation" + "scm_url": "https://github.com/Auditory-Biophysics-Lab/Slicer-ABLTemporalBoneSegmentation", + "tier": 1 } diff --git a/AblationPlanner.json b/AblationPlanner.json index 8c15118a7..dde25f697 100644 --- a/AblationPlanner.json +++ b/AblationPlanner.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["ModelToModelDistance"], "build_subdirectory": ".", "category": "Quantification", "scm_revision": "main", - "scm_url": "https://github.com/naterex23/SlicerAblationPlanner" + "scm_url": "https://github.com/naterex23/SlicerAblationPlanner", + "tier": 3 } diff --git a/AirwaySegmentation.json b/AirwaySegmentation.json index a0fa7993b..9c73f5239 100644 --- a/AirwaySegmentation.json +++ b/AirwaySegmentation.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Segmentation", "scm_revision": "master", - "scm_url": "https://github.com/Slicer/SlicerAirwaySegmentation" + "scm_url": "https://github.com/Slicer/SlicerAirwaySegmentation", + "tier": 1 } diff --git a/AnglePlanesExtension.json b/AnglePlanesExtension.json index 80577d261..600772ef8 100644 --- a/AnglePlanesExtension.json +++ b/AnglePlanesExtension.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Shape Analysis", "scm_revision": "master", - "scm_url": "https://github.com/DCBIA-OrthoLab/AnglePlanes-Extension.git" + "scm_url": "https://github.com/DCBIA-OrthoLab/AnglePlanes-Extension.git", + "tier": 1 } diff --git a/AnomalousFiltersExtension.json b/AnomalousFiltersExtension.json index ec0664cb9..54387c2b6 100644 --- a/AnomalousFiltersExtension.json +++ b/AnomalousFiltersExtension.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Filtering", "scm_revision": "main", - "scm_url": "https://github.com/CSIM-Toolkits/AnomalousFiltersExtension.git" + "scm_url": "https://github.com/CSIM-Toolkits/AnomalousFiltersExtension.git", + "tier": 3 } diff --git a/ArduinoController.json b/ArduinoController.json index e958c9ad0..9f64310e7 100644 --- a/ArduinoController.json +++ b/ArduinoController.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Developer Tools", "scm_revision": "master", - "scm_url": "https://github.com/pzaffino/SlicerArduinoController.git" + "scm_url": "https://github.com/pzaffino/SlicerArduinoController.git", + "tier": 3 } diff --git a/AstmPhantomTest.json b/AstmPhantomTest.json index faa059cd5..d7eeb61e1 100644 --- a/AstmPhantomTest.json +++ b/AstmPhantomTest.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["SlicerOpenIGTLink"], "build_subdirectory": ".", "category": "IGT", "scm_revision": "master", - "scm_url": "https://github.com/Atracsys/SlicerAstmPhantomTest.git" + "scm_url": "https://github.com/Atracsys/SlicerAstmPhantomTest.git", + "tier": 3 } diff --git a/Auto3dgm.json b/Auto3dgm.json index 29986316d..c53e5bfe1 100644 --- a/Auto3dgm.json +++ b/Auto3dgm.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Auto3dgm", "scm_revision": "master", - "scm_url": "https://github.com/ToothAndClaw/SlicerAuto3dgm" + "scm_url": "https://github.com/ToothAndClaw/SlicerAuto3dgm", + "tier": 3 } diff --git a/AutomatedDentalTools.json b/AutomatedDentalTools.json index 6d24fbb47..5a866857b 100644 --- a/AutomatedDentalTools.json +++ b/AutomatedDentalTools.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["SlicerDentalModelSeg", "SlicerConda"], "build_subdirectory": ".", "category": "Segmentation", "scm_revision": "main", - "scm_url": "https://github.com/DCBIA-OrthoLab/SlicerAutomatedDentalTools.git" + "scm_url": "https://github.com/DCBIA-OrthoLab/SlicerAutomatedDentalTools.git", + "tier": 3 } diff --git a/Autoscroll.json b/Autoscroll.json index 29a58de30..86a9e384e 100644 --- a/Autoscroll.json +++ b/Autoscroll.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Segmentation", "scm_revision": "master", - "scm_url": "https://github.com/lassoan/SlicerAutoscroll" + "scm_url": "https://github.com/lassoan/SlicerAutoscroll", + "tier": 3 } diff --git a/BigImage.json b/BigImage.json index 025d2fc42..abbe45b87 100644 --- a/BigImage.json +++ b/BigImage.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "BigImage", "scm_revision": "main", - "scm_url": "https://github.com/gaoyi/SlicerBigImage.git" + "scm_url": "https://github.com/gaoyi/SlicerBigImage.git", + "tier": 1 } diff --git a/BoneReconstructionPlanner.json b/BoneReconstructionPlanner.json index 5dbea2d97..9f3dc84c2 100644 --- a/BoneReconstructionPlanner.json +++ b/BoneReconstructionPlanner.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["SurfaceWrapSolidify", "MarkupsToModel", "Sandbox"], "build_subdirectory": ".", "category": "Planning", "scm_revision": "main", - "scm_url": "https://github.com/SlicerIGT/SlicerBoneReconstructionPlanner.git" + "scm_url": "https://github.com/SlicerIGT/SlicerBoneReconstructionPlanner.git", + "tier": 3 } diff --git a/BoneTextureExtension.json b/BoneTextureExtension.json index 096ecf735..07e7f0b6a 100644 --- a/BoneTextureExtension.json +++ b/BoneTextureExtension.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": "inner-build", "category": "Quantification", "scm_revision": "master", - "scm_url": "https://github.com/Kitware/BoneTextureExtension.git" + "scm_url": "https://github.com/Kitware/BoneTextureExtension.git", + "tier": 3 } diff --git a/BoneThicknessMapping.json b/BoneThicknessMapping.json index dc49ad06b..76a4b0a24 100644 --- a/BoneThicknessMapping.json +++ b/BoneThicknessMapping.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Shape Analysis", "scm_revision": "master", - "scm_url": "https://github.com/Auditory-Biophysics-Lab/SlicerBoneThicknessMappingExtension" + "scm_url": "https://github.com/Auditory-Biophysics-Lab/SlicerBoneThicknessMappingExtension", + "tier": 1 } diff --git a/BrainVolumeRefinement.json b/BrainVolumeRefinement.json index bf3982ebe..672768871 100644 --- a/BrainVolumeRefinement.json +++ b/BrainVolumeRefinement.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Segmentation", "scm_revision": "main", - "scm_url": "https://github.com/CSIM-Toolkits/SlicerBrainVolumeRefinement.git" + "scm_url": "https://github.com/CSIM-Toolkits/SlicerBrainVolumeRefinement.git", + "tier": 3 } diff --git a/BreastImplantAnalyzer.json b/BreastImplantAnalyzer.json index c459c0a3b..92c4d6383 100644 --- a/BreastImplantAnalyzer.json +++ b/BreastImplantAnalyzer.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Quantification", "scm_revision": "master", - "scm_url": "https://github.com/lassoan/SlicerBreastImplantAnalyzer.git" + "scm_url": "https://github.com/lassoan/SlicerBreastImplantAnalyzer.git", + "tier": 3 } diff --git a/BreastUltrasoundAnalysis.json b/BreastUltrasoundAnalysis.json index 518faa877..8bd7ecfda 100644 --- a/BreastUltrasoundAnalysis.json +++ b/BreastUltrasoundAnalysis.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["PyTorch"], "build_subdirectory": ".", "category": "Utilities", "scm_revision": "master", - "scm_url": "https://github.com/ZhyBrian/SlicerBreastUltrasoundAnalysis.git" + "scm_url": "https://github.com/ZhyBrian/SlicerBreastUltrasoundAnalysis.git", + "tier": 3 } diff --git a/Breast_DCEMRI_FTV.json b/Breast_DCEMRI_FTV.json index edffcf224..17d398725 100644 --- a/Breast_DCEMRI_FTV.json +++ b/Breast_DCEMRI_FTV.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "FTV Segmentation", "scm_revision": "master", - "scm_url": "https://github.com/radiology-research/SlicerBreast_DCEMRI_FTV" + "scm_url": "https://github.com/radiology-research/SlicerBreast_DCEMRI_FTV", + "tier": 1 } diff --git a/CBCTToothSegmentation.json b/CBCTToothSegmentation.json index b131221a1..fb5905b02 100644 --- a/CBCTToothSegmentation.json +++ b/CBCTToothSegmentation.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Segmentation", "scm_revision": "master", - "scm_url": "https://github.com/KitwareMedical/SlicerCBCTToothSegmentation.git" + "scm_url": "https://github.com/KitwareMedical/SlicerCBCTToothSegmentation.git", + "tier": 3 } diff --git a/CMFreg.json b/CMFreg.json index c99ef8a32..1baead13a 100644 --- a/CMFreg.json +++ b/CMFreg.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Registration", "scm_revision": "master", - "scm_url": "https://github.com/DCBIA-OrthoLab/CMFreg.git" + "scm_url": "https://github.com/DCBIA-OrthoLab/CMFreg.git", + "tier": 3 } diff --git a/CarreraSlice.json b/CarreraSlice.json index cdcd12737..010462243 100644 --- a/CarreraSlice.json +++ b/CarreraSlice.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Segmentation", "scm_revision": "master", - "scm_url": "https://github.com/ikolesov/CarreraSlice.git" + "scm_url": "https://github.com/ikolesov/CarreraSlice.git", + "tier": 1 } diff --git a/ChangeTracker.json b/ChangeTracker.json index 2ac2d7201..f0f42d38e 100644 --- a/ChangeTracker.json +++ b/ChangeTracker.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Wizards", "scm_revision": "master", - "scm_url": "https://github.com/fedorov/ChangeTrackerPy.git" + "scm_url": "https://github.com/fedorov/ChangeTrackerPy.git", + "tier": 1 } diff --git a/Chest_Imaging_Platform.json b/Chest_Imaging_Platform.json index 4de35d84f..414af2f83 100644 --- a/Chest_Imaging_Platform.json +++ b/Chest_Imaging_Platform.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": "inner-build", "category": "Chest Imaging Platform", "scm_revision": "develop", - "scm_url": "https://github.com/acil-bwh/SlicerCIP" + "scm_url": "https://github.com/acil-bwh/SlicerCIP", + "tier": 3 } diff --git a/CleverSeg.json b/CleverSeg.json index 952532ee8..694eed973 100644 --- a/CleverSeg.json +++ b/CleverSeg.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Segmentation", "scm_revision": "master", - "scm_url": "https://github.com/lassoan/SlicerCleverSegmentation.git" + "scm_url": "https://github.com/lassoan/SlicerCleverSegmentation.git", + "tier": 1 } diff --git a/ColocZStats.json b/ColocZStats.json index e8d9a1e15..c640dd30d 100644 --- a/ColocZStats.json +++ b/ColocZStats.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Quantification", "scm_revision": "main", - "scm_url": "https://github.com/ChenXiang96/SlicerColoc-Z-Stats.git" + "scm_url": "https://github.com/ChenXiang96/SlicerColoc-Z-Stats.git", + "tier": 3 } diff --git a/ConnectToSupervisely.json b/ConnectToSupervisely.json index 40fba96f3..48425e3fd 100644 --- a/ConnectToSupervisely.json +++ b/ConnectToSupervisely.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Supervisely", "scm_revision": "master", - "scm_url": "https://github.com/supervisely-ecosystem/SlicerConnectToSupervisely" + "scm_url": "https://github.com/supervisely-ecosystem/SlicerConnectToSupervisely", + "tier": 1 } diff --git a/CurveMaker.json b/CurveMaker.json index 7dfb74098..6e9396641 100644 --- a/CurveMaker.json +++ b/CurveMaker.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Informatics", "scm_revision": "master", - "scm_url": "https://github.com/tokjun/CurveMaker" + "scm_url": "https://github.com/tokjun/CurveMaker", + "tier": 1 } diff --git a/DCMQI.json b/DCMQI.json index 514b4a34e..82651ff5d 100644 --- a/DCMQI.json +++ b/DCMQI.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": "dcmqi-build", "category": "DICOM", "scm_revision": "master", - "scm_url": "https://github.com/QIICR/dcmqi.git" + "scm_url": "https://github.com/QIICR/dcmqi.git", + "tier": 5 } diff --git a/DICOMwebBrowser.json b/DICOMwebBrowser.json index 610d4d2a2..2580518df 100644 --- a/DICOMwebBrowser.json +++ b/DICOMwebBrowser.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Informatics", "scm_revision": "main", - "scm_url": "https://github.com/lassoan/SlicerDICOMwebBrowser" + "scm_url": "https://github.com/lassoan/SlicerDICOMwebBrowser", + "tier": 5 } diff --git a/DRRGenerator.json b/DRRGenerator.json index 1ed566e3f..9246232b8 100644 --- a/DRRGenerator.json +++ b/DRRGenerator.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Filtering", "scm_revision": "master", - "scm_url": "https://github.com/lassoan/SlicerDRRGenerator.git" + "scm_url": "https://github.com/lassoan/SlicerDRRGenerator.git", + "tier": 1 } diff --git a/DSCMRIAnalysis.json b/DSCMRIAnalysis.json index 6f55c6632..39579d3f2 100644 --- a/DSCMRIAnalysis.json +++ b/DSCMRIAnalysis.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Quantification", "scm_revision": "master", - "scm_url": "https://github.com/QIICR/DSC_Analysis.git" + "scm_url": "https://github.com/QIICR/DSC_Analysis.git", + "tier": 3 } diff --git a/DatabaseInteractor.json b/DatabaseInteractor.json index db8e73897..28f73e1ad 100644 --- a/DatabaseInteractor.json +++ b/DatabaseInteractor.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Web System Tools", "scm_revision": "master", - "scm_url": "https://github.com/DCBIA-OrthoLab/DatabaseInteractorExtension.git" + "scm_url": "https://github.com/DCBIA-OrthoLab/DatabaseInteractorExtension.git", + "tier": 1 } diff --git a/DebuggingTools.json b/DebuggingTools.json index cc9cf66d8..a48639242 100644 --- a/DebuggingTools.json +++ b/DebuggingTools.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Developer Tools", "scm_revision": "master", - "scm_url": "https://github.com/SlicerRt/SlicerDebuggingTools.git" + "scm_url": "https://github.com/SlicerRt/SlicerDebuggingTools.git", + "tier": 5 } diff --git a/DensityLungSegmentation.json b/DensityLungSegmentation.json index 5a6568942..53d61253a 100644 --- a/DensityLungSegmentation.json +++ b/DensityLungSegmentation.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Segmentation", "scm_revision": "main", - "scm_url": "https://github.com/pzaffino/SlicerDensityLungSegmentation.git" + "scm_url": "https://github.com/pzaffino/SlicerDensityLungSegmentation.git", + "tier": 3 } diff --git a/DentalSegmentator.json b/DentalSegmentator.json index eb8d13e91..fbfb1c125 100644 --- a/DentalSegmentator.json +++ b/DentalSegmentator.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["NNUNet"], "build_subdirectory": ".", "category": "Segmentation", "scm_revision": "main", - "scm_url": "https://github.com/gaudot/SlicerDentalSegmentator" + "scm_url": "https://github.com/gaudot/SlicerDentalSegmentator", + "tier": 3 } diff --git a/DeveloperToolsForExtensions.json b/DeveloperToolsForExtensions.json index 88c8a71fb..84f74e1db 100644 --- a/DeveloperToolsForExtensions.json +++ b/DeveloperToolsForExtensions.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Developer Tools", "scm_revision": "master", - "scm_url": "https://github.com/Slicer/SlicerDeveloperToolsForExtensions.git" + "scm_url": "https://github.com/Slicer/SlicerDeveloperToolsForExtensions.git", + "tier": 5 } diff --git a/DiffusionQC.json b/DiffusionQC.json index 12b356d76..fdb37be0c 100644 --- a/DiffusionQC.json +++ b/DiffusionQC.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["SlicerDMRI"], "build_subdirectory": ".", "category": "Diffusion", "scm_revision": "master", - "scm_url": "https://github.com/pnlbwh/SlicerDiffusionQC" + "scm_url": "https://github.com/pnlbwh/SlicerDiffusionQC", + "tier": 3 } diff --git a/EasyClip.json b/EasyClip.json index d44d0394e..fbdc60ed3 100644 --- a/EasyClip.json +++ b/EasyClip.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Shape Analysis", "scm_revision": "master", - "scm_url": "https://github.com/DCBIA-OrthoLab/EasyClip-Extension.git" + "scm_url": "https://github.com/DCBIA-OrthoLab/EasyClip-Extension.git", + "tier": 3 } diff --git a/ErodeDilateLabel.json b/ErodeDilateLabel.json index 0d7f8e1f2..e76d843c7 100644 --- a/ErodeDilateLabel.json +++ b/ErodeDilateLabel.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Filtering.Morphology", "scm_revision": "master", - "scm_url": "https://github.com/tokjun/ErodeDilateLabel.git" + "scm_url": "https://github.com/tokjun/ErodeDilateLabel.git", + "tier": 1 } diff --git a/ExtraMarkups.json b/ExtraMarkups.json index a5b7e235c..74e66ebd7 100644 --- a/ExtraMarkups.json +++ b/ExtraMarkups.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Utilities", "scm_revision": "main", - "scm_url": "https://github.com/chir-set/SlicerExtraMarkups.git" + "scm_url": "https://github.com/chir-set/SlicerExtraMarkups.git", + "tier": 3 } diff --git a/FiducialsToModelDistance.json b/FiducialsToModelDistance.json index fe8ed3a98..3a16255c1 100644 --- a/FiducialsToModelDistance.json +++ b/FiducialsToModelDistance.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Quantification", "scm_revision": "master", - "scm_url": "https://github.com/ReynoldsJ20/SlicerFiducialsToModelDistance" + "scm_url": "https://github.com/ReynoldsJ20/SlicerFiducialsToModelDistance", + "tier": 3 } diff --git a/FilmDosimetryAnalysis.json b/FilmDosimetryAnalysis.json index 11ae2401e..c0bccc91a 100644 --- a/FilmDosimetryAnalysis.json +++ b/FilmDosimetryAnalysis.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["SlicerRT"], "build_subdirectory": ".", "category": "Radiotherapy", "scm_revision": "master", - "scm_url": "https://github.com/SlicerRt/FilmDosimetryAnalysis.git" + "scm_url": "https://github.com/SlicerRt/FilmDosimetryAnalysis.git", + "tier": 3 } diff --git a/FlywheelCaseIterator.json b/FlywheelCaseIterator.json index cd8a404b8..8ed5cab1c 100644 --- a/FlywheelCaseIterator.json +++ b/FlywheelCaseIterator.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["SlicerDevelopmentToolbox"], "build_subdirectory": ".", "category": "Informatics", "scm_revision": "main", - "scm_url": "https://gitlab.com/flywheel-io/scientific-solutions/app/Slicerflywheelcaseiterator.git" + "scm_url": "https://gitlab.com/flywheel-io/scientific-solutions/app/Slicerflywheelcaseiterator.git", + "tier": 1 } diff --git a/GelDosimetryAnalysis.json b/GelDosimetryAnalysis.json index defb4cba8..a54063488 100644 --- a/GelDosimetryAnalysis.json +++ b/GelDosimetryAnalysis.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["SlicerRT"], "build_subdirectory": ".", "category": "Radiotherapy", "scm_revision": "master", - "scm_url": "https://github.com/SlicerRt/GelDosimetryAnalysis.git" + "scm_url": "https://github.com/SlicerRt/GelDosimetryAnalysis.git", + "tier": 3 } diff --git a/GeodesicSlicer.json b/GeodesicSlicer.json index 71a34b97a..fee906306 100644 --- a/GeodesicSlicer.json +++ b/GeodesicSlicer.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Informatics", "scm_revision": "master", - "scm_url": "https://github.com/FredericBr/SlicerGeodesic" + "scm_url": "https://github.com/FredericBr/SlicerGeodesic", + "tier": 3 } diff --git a/GyroGuide.json b/GyroGuide.json index 27ee0e05d..9e3243361 100644 --- a/GyroGuide.json +++ b/GyroGuide.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "IGT", "scm_revision": "master", - "scm_url": "https://github.com/lpfang/GyroGuide.git" + "scm_url": "https://github.com/lpfang/GyroGuide.git", + "tier": 3 } diff --git a/HDBrainExtraction.json b/HDBrainExtraction.json index c1492cabe..d7c7eb0dc 100644 --- a/HDBrainExtraction.json +++ b/HDBrainExtraction.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["PyTorch"], "build_subdirectory": ".", "category": "Segmentation", "scm_revision": "main", - "scm_url": "https://github.com/lassoan/SlicerHDBrainExtraction.git" + "scm_url": "https://github.com/lassoan/SlicerHDBrainExtraction.git", + "tier": 3 } diff --git a/IDCBrowser.json b/IDCBrowser.json index ca48349ec..30fd24ed3 100644 --- a/IDCBrowser.json +++ b/IDCBrowser.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["QuantitativeReporting"], "build_subdirectory": ".", "category": "Informatics", "scm_revision": "main", - "scm_url": "https://github.com/ImagingDataCommons/SlicerIDCBrowser.git" + "scm_url": "https://github.com/ImagingDataCommons/SlicerIDCBrowser.git", + "tier": 3 } diff --git a/ImageAugmenter.json b/ImageAugmenter.json index 1256ec1fd..fdce863ee 100644 --- a/ImageAugmenter.json +++ b/ImageAugmenter.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Utilities", "scm_revision": "main", - "scm_url": "https://github.com/ciroraggio/SlicerImageAugmenter.git" + "scm_url": "https://github.com/ciroraggio/SlicerImageAugmenter.git", + "tier": 3 } diff --git a/ImageCompare.json b/ImageCompare.json index 3d27222aa..0f5e08605 100644 --- a/ImageCompare.json +++ b/ImageCompare.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Quantification", "scm_revision": "master", - "scm_url": "https://github.com/pzaffino/SlicerImageCompare.git" + "scm_url": "https://github.com/pzaffino/SlicerImageCompare.git", + "tier": 3 } diff --git a/ImageMaker.json b/ImageMaker.json index cbed2ed66..e262bc798 100644 --- a/ImageMaker.json +++ b/ImageMaker.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Developer Tools", "scm_revision": "master", - "scm_url": "https://github.com/finetjul/ImageMaker" + "scm_url": "https://github.com/finetjul/ImageMaker", + "tier": 3 } diff --git a/IntensitySegmenter.json b/IntensitySegmenter.json index ba29b7782..847cb185b 100644 --- a/IntensitySegmenter.json +++ b/IntensitySegmenter.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Segmentation", "scm_revision": "release", - "scm_url": "https://github.com/DCBIA-OrthoLab/IntensitySegmenter.git" + "scm_url": "https://github.com/DCBIA-OrthoLab/IntensitySegmenter.git", + "tier": 1 } diff --git a/KidneyStoneCalculator.json b/KidneyStoneCalculator.json index f935a91dc..7ad043812 100644 --- a/KidneyStoneCalculator.json +++ b/KidneyStoneCalculator.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Segmentation", "scm_revision": "master", - "scm_url": "https://github.com/fredericpanthier/SlicerKidneyStoneCalculator.git" + "scm_url": "https://github.com/fredericpanthier/SlicerKidneyStoneCalculator.git", + "tier": 3 } diff --git a/LanguagePacks.json b/LanguagePacks.json index d7c5db12c..9fb85c9ef 100644 --- a/LanguagePacks.json +++ b/LanguagePacks.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Utilities", "scm_revision": "main", - "scm_url": "https://github.com/Slicer/SlicerLanguagePacks" + "scm_url": "https://github.com/Slicer/SlicerLanguagePacks", + "tier": 5 } diff --git a/LesionSimulator.json b/LesionSimulator.json index 7749bc389..1cf5baa00 100644 --- a/LesionSimulator.json +++ b/LesionSimulator.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Simulation", "scm_revision": "main", - "scm_url": "https://github.com/CSIM-Toolkits/Slicer-LesionSimulatorExtension.git" + "scm_url": "https://github.com/CSIM-Toolkits/Slicer-LesionSimulatorExtension.git", + "tier": 3 } diff --git a/LesionSpotlight.json b/LesionSpotlight.json index 4bd36d39d..f5a7c5407 100644 --- a/LesionSpotlight.json +++ b/LesionSpotlight.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["AnomalousFiltersExtension"], "build_subdirectory": ".", "category": "Segmentation", "scm_revision": "main", - "scm_url": "https://github.com/CSIM-Toolkits/Slicer-LesionSpotlightExtension.git" + "scm_url": "https://github.com/CSIM-Toolkits/Slicer-LesionSpotlightExtension.git", + "tier": 3 } diff --git a/LungCTAnalyzer.json b/LungCTAnalyzer.json index 8035e2411..9ee9927f2 100644 --- a/LungCTAnalyzer.json +++ b/LungCTAnalyzer.json @@ -1,5 +1,5 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [ "PyTorch", "SegmentEditorExtraEffects", @@ -8,5 +8,6 @@ "build_subdirectory": ".", "category": "Chest Imaging Platform", "scm_revision": "master", - "scm_url": "https://github.com/Slicer/SlicerLungCTAnalyzer" + "scm_url": "https://github.com/Slicer/SlicerLungCTAnalyzer", + "tier": 3 } diff --git a/MEMOS.json b/MEMOS.json index 156a718d0..1f936ead8 100644 --- a/MEMOS.json +++ b/MEMOS.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["PyTorch"], "build_subdirectory": ".", "category": "Segmentation", "scm_revision": "main", - "scm_url": "https://github.com/SlicerMorph/SlicerMEMOS" + "scm_url": "https://github.com/SlicerMorph/SlicerMEMOS", + "tier": 3 } diff --git a/MHubRunner.json b/MHubRunner.json index f76033c82..5cfc631d1 100644 --- a/MHubRunner.json +++ b/MHubRunner.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Examples", "scm_revision": "main", - "scm_url": "https://github.com/MHubAI/SlicerMRunner" + "scm_url": "https://github.com/MHubAI/SlicerMRunner", + "tier": 3 } diff --git a/MONAIAuto3DSeg.json b/MONAIAuto3DSeg.json index 3960b83fe..d6ff2d750 100644 --- a/MONAIAuto3DSeg.json +++ b/MONAIAuto3DSeg.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["PyTorch"], "build_subdirectory": ".", "category": "Segmentation", "scm_revision": "main", - "scm_url": "https://github.com/lassoan/SlicerMONAIAuto3DSeg" + "scm_url": "https://github.com/lassoan/SlicerMONAIAuto3DSeg", + "tier": 5 } diff --git a/MONAILabel.json b/MONAILabel.json index 93f72cc0e..b2a6dd3b8 100644 --- a/MONAILabel.json +++ b/MONAILabel.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Active Learning", "scm_revision": "main", - "scm_url": "https://github.com/Project-MONAI/MONAILabel.git" + "scm_url": "https://github.com/Project-MONAI/MONAILabel.git", + "tier": 3 } diff --git a/MONAIViz.json b/MONAIViz.json index ec3294c33..3f69d3acb 100644 --- a/MONAIViz.json +++ b/MONAIViz.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["PyTorch"], "build_subdirectory": ".", "category": "Developer Tools", "scm_revision": "main", - "scm_url": "https://github.com/Project-MONAI/SlicerMONAIViz" + "scm_url": "https://github.com/Project-MONAI/SlicerMONAIViz", + "tier": 3 } diff --git a/MRUSLandmarking.json b/MRUSLandmarking.json index a303c0730..d216fcd54 100644 --- a/MRUSLandmarking.json +++ b/MRUSLandmarking.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Informatics", "scm_revision": "main", - "scm_url": "https://github.com/koegl/SlicerMRUSLandmarking.git" + "scm_url": "https://github.com/koegl/SlicerMRUSLandmarking.git", + "tier": 3 } diff --git a/MarkupsToModel.json b/MarkupsToModel.json index c417adde5..a9607a9cb 100644 --- a/MarkupsToModel.json +++ b/MarkupsToModel.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Informatics", "scm_revision": "master", - "scm_url": "https://github.com/SlicerIGT/SlicerMarkupsToModel" + "scm_url": "https://github.com/SlicerIGT/SlicerMarkupsToModel", + "tier": 5 } diff --git a/MassVision.json b/MassVision.json index 1bf1ebbc0..128831a41 100644 --- a/MassVision.json +++ b/MassVision.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Spectral Imaging", "scm_revision": "main", - "scm_url": "https://github.com/jamzad/SlicerMassVision" + "scm_url": "https://github.com/jamzad/SlicerMassVision", + "tier": 3 } diff --git a/MatlabBridge.json b/MatlabBridge.json index c9d27da07..6487cd756 100644 --- a/MatlabBridge.json +++ b/MatlabBridge.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["SlicerOpenIGTLink"], "build_subdirectory": ".", "category": "Developer Tools", "scm_revision": "master", - "scm_url": "https://github.com/PerkLab/SlicerMatlabBridge.git" + "scm_url": "https://github.com/PerkLab/SlicerMatlabBridge.git", + "tier": 3 } diff --git a/MedialSkeleton.json b/MedialSkeleton.json index a0d03b33e..2caa5e28a 100644 --- a/MedialSkeleton.json +++ b/MedialSkeleton.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": "inner-build", "category": "Shape Analysis", "scm_revision": "main", - "scm_url": "https://github.com/JolleyLab/SlicerMedialSkeleton.git" + "scm_url": "https://github.com/JolleyLab/SlicerMedialSkeleton.git", + "tier": 3 } diff --git a/MeshStatisticsExtension.json b/MeshStatisticsExtension.json index ea120c24c..821a213f2 100644 --- a/MeshStatisticsExtension.json +++ b/MeshStatisticsExtension.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["ModelToModelDistance"], "build_subdirectory": ".", "category": "Shape Analysis", "scm_revision": "master", - "scm_url": "https://github.com/DCBIA-OrthoLab/MeshStatisticsExtension.git" + "scm_url": "https://github.com/DCBIA-OrthoLab/MeshStatisticsExtension.git", + "tier": 3 } diff --git a/MeshToLabelMap.json b/MeshToLabelMap.json index bb5af6b51..aebd68f61 100644 --- a/MeshToLabelMap.json +++ b/MeshToLabelMap.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Shape Analysis", "scm_revision": "master", - "scm_url": "https://github.com/NIRALUser/MeshToLabelMap.git" + "scm_url": "https://github.com/NIRALUser/MeshToLabelMap.git", + "tier": 1 } diff --git a/ModelClip.json b/ModelClip.json index f21ec2ebc..9817ed896 100644 --- a/ModelClip.json +++ b/ModelClip.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Surface Models", "scm_revision": "main", - "scm_url": "https://github.com/jamesobutler/ModelClip.git" + "scm_url": "https://github.com/jamesobutler/ModelClip.git", + "tier": 1 } diff --git a/ModelCropper.json b/ModelCropper.json index a606718d3..ec6f93ca2 100644 --- a/ModelCropper.json +++ b/ModelCropper.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Surface Models", "scm_revision": "master", - "scm_url": "https://github.com/sebastianandress/Slicer-ModelCropper.git" + "scm_url": "https://github.com/sebastianandress/Slicer-ModelCropper.git", + "tier": 3 } diff --git a/ModelToModelDistance.json b/ModelToModelDistance.json index 1b24ff226..9a61be5e9 100644 --- a/ModelToModelDistance.json +++ b/ModelToModelDistance.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Quantification", "scm_revision": "master", - "scm_url": "https://github.com/NIRALUser/3DMetricTools.git" + "scm_url": "https://github.com/NIRALUser/3DMetricTools.git", + "tier": 3 } diff --git a/NNUNet.json b/NNUNet.json index e042cac46..26f09f823 100644 --- a/NNUNet.json +++ b/NNUNet.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["PyTorch", "SlicerPythonTestRunner"], "build_subdirectory": ".", "category": "Segmentation", "scm_revision": "main", - "scm_url": "https://github.com/KitwareMedical/SlicerNNUnet" + "scm_url": "https://github.com/KitwareMedical/SlicerNNUnet", + "tier": 5 } diff --git a/NeedleFinder.json b/NeedleFinder.json index e3538ecc9..fb5c048ac 100644 --- a/NeedleFinder.json +++ b/NeedleFinder.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "IGT", "scm_revision": "master", - "scm_url": "https://github.com/needlefinder/NeedleFinder.git" + "scm_url": "https://github.com/needlefinder/NeedleFinder.git", + "tier": 1 } diff --git a/NvidiaAIAssistedAnnotation.json b/NvidiaAIAssistedAnnotation.json index e4803100f..10f7b5c40 100644 --- a/NvidiaAIAssistedAnnotation.json +++ b/NvidiaAIAssistedAnnotation.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Segmentation", "scm_revision": "master", - "scm_url": "https://github.com/NVIDIA/ai-assisted-annotation-client.git" + "scm_url": "https://github.com/NVIDIA/ai-assisted-annotation-client.git", + "tier": 1 } diff --git a/OpenDose3D.json b/OpenDose3D.json index 762788c62..753b6b446 100644 --- a/OpenDose3D.json +++ b/OpenDose3D.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["SlicerElastix"], "build_subdirectory": ".", "category": "Radiotherapy", "scm_revision": "master-stable", - "scm_url": "https://gitlab.com/opendose/opendose3d.git" + "scm_url": "https://gitlab.com/opendose/opendose3d.git", + "tier": 3 } diff --git a/OrthodonticAnalysis.json b/OrthodonticAnalysis.json index b4f7a5407..6c7bdfd67 100644 --- a/OrthodonticAnalysis.json +++ b/OrthodonticAnalysis.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Orthodontics", "scm_revision": "master", - "scm_url": "https://github.com/OrthodonticAnalysis/SlicerOrthodonticAnalysis" + "scm_url": "https://github.com/OrthodonticAnalysis/SlicerOrthodonticAnalysis", + "tier": 3 } diff --git a/OsteotomyPlanner.json b/OsteotomyPlanner.json index f4f9edd6a..22c06666c 100644 --- a/OsteotomyPlanner.json +++ b/OsteotomyPlanner.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Osteotomy Planning", "scm_revision": "master", - "scm_url": "https://github.com/KitwareMedical/OsteotomyPlanner.git" + "scm_url": "https://github.com/KitwareMedical/OsteotomyPlanner.git", + "tier": 3 } diff --git a/PBNRR.json b/PBNRR.json index 5da418ca9..18c5d4a63 100644 --- a/PBNRR.json +++ b/PBNRR.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": "inner-build", "category": "Registration", "scm_revision": "master", - "scm_url": "https://github.com/aangelos28/PBNRR.git" + "scm_url": "https://github.com/aangelos28/PBNRR.git", + "tier": 3 } diff --git a/PET-IndiC.json b/PET-IndiC.json index 4814d687c..bed2ffea6 100644 --- a/PET-IndiC.json +++ b/PET-IndiC.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Quantification", "scm_revision": "master", - "scm_url": "https://github.com/QIICR/PET-IndiC.git" + "scm_url": "https://github.com/QIICR/PET-IndiC.git", + "tier": 3 } diff --git a/PET-MUST-Segmenter.json b/PET-MUST-Segmenter.json index 704894d20..8de2db652 100644 --- a/PET-MUST-Segmenter.json +++ b/PET-MUST-Segmenter.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["SlicerRadiomics"], "build_subdirectory": ".", "category": "Segmentation", "scm_revision": "master", - "scm_url": "https://github.com/kyliekeijzer/Slicer-PET-MUST-segmenter.git" + "scm_url": "https://github.com/kyliekeijzer/Slicer-PET-MUST-segmenter.git", + "tier": 3 } diff --git a/PETCPhantom.json b/PETCPhantom.json index 72bc508c7..3ba95cfc1 100644 --- a/PETCPhantom.json +++ b/PETCPhantom.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Quantification", "scm_revision": "master", - "scm_url": "https://github.com/QIICR/SlicerPETPhantomAnalysis.git" + "scm_url": "https://github.com/QIICR/SlicerPETPhantomAnalysis.git", + "tier": 3 } diff --git a/PETDICOMExtension.json b/PETDICOMExtension.json index 0c26089ac..dd4bc99b4 100644 --- a/PETDICOMExtension.json +++ b/PETDICOMExtension.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Converters", "scm_revision": "master", - "scm_url": "https://github.com/QIICR/Slicer-PETDICOMExtension.git" + "scm_url": "https://github.com/QIICR/Slicer-PETDICOMExtension.git", + "tier": 3 } diff --git a/PETLiverUptakeMeasurement.json b/PETLiverUptakeMeasurement.json index c6fbba1c8..e845b51bd 100644 --- a/PETLiverUptakeMeasurement.json +++ b/PETLiverUptakeMeasurement.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["DCMQI"], "build_subdirectory": ".", "category": "Quantification", "scm_revision": "master", - "scm_url": "https://github.com/QIICR/PETLiverUptakeMeasurement" + "scm_url": "https://github.com/QIICR/PETLiverUptakeMeasurement", + "tier": 3 } diff --git a/PETTumorSegmentation.json b/PETTumorSegmentation.json index 9cc4d12b3..51f61debf 100644 --- a/PETTumorSegmentation.json +++ b/PETTumorSegmentation.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Segmentation", "scm_revision": "master", - "scm_url": "https://github.com/QIICR/PETTumorSegmentation.git" + "scm_url": "https://github.com/QIICR/PETTumorSegmentation.git", + "tier": 3 } diff --git a/ParallelProcessing.json b/ParallelProcessing.json index 7d728d9b0..1b5af415a 100644 --- a/ParallelProcessing.json +++ b/ParallelProcessing.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Utilities", "scm_revision": "master", - "scm_url": "https://github.com/pieper/SlicerParallelProcessing" + "scm_url": "https://github.com/pieper/SlicerParallelProcessing", + "tier": 5 } diff --git a/PathReconstruction.json b/PathReconstruction.json index 7b836c57e..5f439b7d7 100644 --- a/PathReconstruction.json +++ b/PathReconstruction.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["MarkupsToModel", "SlicerIGT", "SlicerRT"], "build_subdirectory": ".", "category": "IGT", "scm_revision": "master", - "scm_url": "https://github.com/SlicerIGT/SlicerPathReconstruction.git" + "scm_url": "https://github.com/SlicerIGT/SlicerPathReconstruction.git", + "tier": 3 } diff --git a/PedicleScrewSimulator.json b/PedicleScrewSimulator.json index 8ae5d29f5..be9657e71 100644 --- a/PedicleScrewSimulator.json +++ b/PedicleScrewSimulator.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Training", "scm_revision": "master", - "scm_url": "https://github.com/lassoan/PedicleScrewSimulator" + "scm_url": "https://github.com/lassoan/PedicleScrewSimulator", + "tier": 3 } diff --git a/PercutaneousApproachAnalysis.json b/PercutaneousApproachAnalysis.json index 4ccd4beef..f38b99a5a 100644 --- a/PercutaneousApproachAnalysis.json +++ b/PercutaneousApproachAnalysis.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "IGT", "scm_revision": "master", - "scm_url": "https://github.com/SlicerIGT/PercutaneousApproachAnalysis" + "scm_url": "https://github.com/SlicerIGT/PercutaneousApproachAnalysis", + "tier": 3 } diff --git a/PerkTutor.json b/PerkTutor.json index a61ea6cba..1827d97a7 100644 --- a/PerkTutor.json +++ b/PerkTutor.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Training", "scm_revision": "master", - "scm_url": "https://github.com/PerkTutor/PerkTutor.git" + "scm_url": "https://github.com/PerkTutor/PerkTutor.git", + "tier": 3 } diff --git a/PetSpectAnalysis.json b/PetSpectAnalysis.json index 759cfccc6..9e0436c08 100644 --- a/PetSpectAnalysis.json +++ b/PetSpectAnalysis.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Nuclear Medicine", "scm_revision": "master", - "scm_url": "https://github.com/gti-fing/SlicerPetSpectAnalysis.git" + "scm_url": "https://github.com/gti-fing/SlicerPetSpectAnalysis.git", + "tier": 3 } diff --git a/PickAndPaintExtension.json b/PickAndPaintExtension.json index 38fd4d56e..cbf71ff8c 100644 --- a/PickAndPaintExtension.json +++ b/PickAndPaintExtension.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Shape Analysis", "scm_revision": "master", - "scm_url": "https://github.com/DCBIA-OrthoLab/PickAndPaintExtension.git" + "scm_url": "https://github.com/DCBIA-OrthoLab/PickAndPaintExtension.git", + "tier": 3 } diff --git a/Pipelines.json b/Pipelines.json index 2e6b46823..6129f51c5 100644 --- a/Pipelines.json +++ b/Pipelines.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Pipelines", "scm_revision": "main", - "scm_url": "https://github.com/KitwareMedical/SlicerPipelines.git" + "scm_url": "https://github.com/KitwareMedical/SlicerPipelines.git", + "tier": 3 } diff --git a/PkModeling.json b/PkModeling.json index 5be04c101..059f8c2af 100644 --- a/PkModeling.json +++ b/PkModeling.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": "pkmodeling-build", "category": "Quantification", "scm_revision": "master", - "scm_url": "https://github.com/QIICR/PkModeling.git" + "scm_url": "https://github.com/QIICR/PkModeling.git", + "tier": 3 } diff --git a/PortPlacement.json b/PortPlacement.json index bfc3e0ff5..dd973c4b7 100644 --- a/PortPlacement.json +++ b/PortPlacement.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": "inner-build", "category": "IGT", "scm_revision": "master", - "scm_url": "https://github.com/SlicerIGT/PortPlacement.git" + "scm_url": "https://github.com/SlicerIGT/PortPlacement.git", + "tier": 3 } diff --git a/PyTorch.json b/PyTorch.json index f3ffebc9e..805232520 100644 --- a/PyTorch.json +++ b/PyTorch.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Utilities", "scm_revision": "main", - "scm_url": "https://github.com/fepegar/SlicerPyTorch.git" + "scm_url": "https://github.com/fepegar/SlicerPyTorch.git", + "tier": 5 } diff --git a/Q3DC.json b/Q3DC.json index 1a8fa3d59..2b77dc9a9 100644 --- a/Q3DC.json +++ b/Q3DC.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["SlicerMarkupConstraints"], "build_subdirectory": ".", "category": "Shape Analysis", "scm_revision": "master", - "scm_url": "https://github.com/DCBIA-OrthoLab/Q3DCExtension.git" + "scm_url": "https://github.com/DCBIA-OrthoLab/Q3DCExtension.git", + "tier": 3 } diff --git a/QuantitativeReporting.json b/QuantitativeReporting.json index 7f44fbcc2..6c1577c68 100644 --- a/QuantitativeReporting.json +++ b/QuantitativeReporting.json @@ -1,5 +1,5 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [ "SlicerDevelopmentToolbox", "DCMQI", @@ -8,5 +8,6 @@ "build_subdirectory": ".", "category": "Informatics", "scm_revision": "master", - "scm_url": "https://github.com/QIICR/QuantitativeReporting.git" + "scm_url": "https://github.com/QIICR/QuantitativeReporting.git", + "tier": 5 } diff --git a/README.md b/README.md index 4af2b709b..2db6032f4 100644 --- a/README.md +++ b/README.md @@ -1,8 +1,6 @@ -Slicer Extensions Index -======================= +# Slicer Extensions Index -Overview --------- +## Overview Think of the ExtensionsIndex as a repository containing a list of [extension description file][]s (*.s4ext) used by the Slicer extensions build system to build, test, package and upload @@ -17,22 +15,28 @@ slicer factory interact. -Build instructions ------------------- +## Extension tiers + +We accept extensions to 3D Slicer at various quality and maturity levels. To make it clear for users what they can expect from a particular extension, 3D Slicer maintainers assign each extension to a "tier": + +- Tier 1: Experimental extensions. +- Tier 3: Community-supported extensions. +- Tier 5: Critically important extensions, supported by Slicer core developers. + +Extension tier 2 and 4 are reserved for future use, to allow defining intermediate steps between the initially defined tiers without reclassifying every extension. + +## Build instructions See https://slicer.readthedocs.io/en/latest/developer_guide/extensions.html#extensions-build-system -Contact -------- +## Contact Questions regarding this project should be posted on 3D Slicer forum: https://discourse.slicer.org -License -------- +## License * [3D Slicer license](https://github.com/Slicer/Slicer/blob/main/License.txt) - [CDash]: https://slicer.cdash.org/index.php?project=SlicerPreview [extensions manager]: https://slicer.readthedocs.io/en/latest/user_guide/extensions_manager.html [extension description file]: https://slicer.readthedocs.io/en/latest/developer_guide/extensions.html#extension-description-file diff --git a/RVXLiverSegmentation.json b/RVXLiverSegmentation.json index 25d6a6088..2758030fb 100644 --- a/RVXLiverSegmentation.json +++ b/RVXLiverSegmentation.json @@ -1,5 +1,5 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [ "SlicerVMTK", "MarkupsToModel", @@ -9,5 +9,6 @@ "build_subdirectory": ".", "category": "Segmentation", "scm_revision": "main", - "scm_url": "https://github.com/R-Vessel-X/SlicerRVXLiverSegmentation" + "scm_url": "https://github.com/R-Vessel-X/SlicerRVXLiverSegmentation", + "tier": 3 } diff --git a/RVXVesselnessFilters.json b/RVXVesselnessFilters.json index 0c21067de..bb67baf4e 100644 --- a/RVXVesselnessFilters.json +++ b/RVXVesselnessFilters.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Filtering.Vesselness", "scm_revision": "main", - "scm_url": "https://github.com/R-Vessel-X/SlicerRVXVesselnessFilters" + "scm_url": "https://github.com/R-Vessel-X/SlicerRVXVesselnessFilters", + "tier": 3 } diff --git a/RawImageGuess.json b/RawImageGuess.json index 953651cf1..c9890a031 100644 --- a/RawImageGuess.json +++ b/RawImageGuess.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Informatics", "scm_revision": "master", - "scm_url": "https://github.com/acetylsalicyl/SlicerRawImageGuess" + "scm_url": "https://github.com/acetylsalicyl/SlicerRawImageGuess", + "tier": 3 } diff --git a/RegistrationQA.json b/RegistrationQA.json index 61c7939bd..acab3a28e 100644 --- a/RegistrationQA.json +++ b/RegistrationQA.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["SlicerRT"], "build_subdirectory": ".", "category": "Registration", "scm_revision": "master", - "scm_url": "https://github.com/gsi-biomotion/SlicerRegistrationQA.git" + "scm_url": "https://github.com/gsi-biomotion/SlicerRegistrationQA.git", + "tier": 3 } diff --git a/RegularizedFastMarching.json b/RegularizedFastMarching.json index c0cca7864..a09f36cba 100644 --- a/RegularizedFastMarching.json +++ b/RegularizedFastMarching.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Segmentation", "scm_revision": "main", - "scm_url": "https://github.com/jamesobutler/SlicerRegularizedFastMarching" + "scm_url": "https://github.com/jamesobutler/SlicerRegularizedFastMarching", + "tier": 1 } diff --git a/ResectionPlanner.json b/ResectionPlanner.json index f98ebb355..a5120e93b 100644 --- a/ResectionPlanner.json +++ b/ResectionPlanner.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["SlicerRT"], "build_subdirectory": ".", "category": "IGT", "scm_revision": "master", - "scm_url": "https://github.com/SlicerIGT/ResectionPlanner.git" + "scm_url": "https://github.com/SlicerIGT/ResectionPlanner.git", + "tier": 1 } diff --git a/SNRMeasurement.json b/SNRMeasurement.json index 6044eea41..c6e37fa16 100644 --- a/SNRMeasurement.json +++ b/SNRMeasurement.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "IGT", "scm_revision": "master", - "scm_url": "https://github.com/SNRLab/SNRMeasurement" + "scm_url": "https://github.com/SNRLab/SNRMeasurement", + "tier": 3 } diff --git a/SPHARM-PDM.json b/SPHARM-PDM.json index d662c83bd..c096be5ba 100644 --- a/SPHARM-PDM.json +++ b/SPHARM-PDM.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["MeshToLabelMap"], "build_subdirectory": "SPHARM-PDM-build", "category": "SPHARM", "scm_revision": "master", - "scm_url": "https://github.com/NIRALUser/SPHARM-PDM.git" + "scm_url": "https://github.com/NIRALUser/SPHARM-PDM.git", + "tier": 3 } diff --git a/Sandbox.json b/Sandbox.json index 38fd10c11..944c371dc 100644 --- a/Sandbox.json +++ b/Sandbox.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Examples", "scm_revision": "master", - "scm_url": "https://github.com/PerkLab/SlicerSandbox.git" + "scm_url": "https://github.com/PerkLab/SlicerSandbox.git", + "tier": 3 } diff --git a/ScatteredTransform.json b/ScatteredTransform.json index bb4584a53..2f960b32c 100644 --- a/ScatteredTransform.json +++ b/ScatteredTransform.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Registration", "scm_revision": "master", - "scm_url": "https://github.com/Sunderlandkyl/ScatteredTransform" + "scm_url": "https://github.com/Sunderlandkyl/ScatteredTransform", + "tier": 3 } diff --git a/Scoliosis.json b/Scoliosis.json index cbec9e674..fc72c175f 100644 --- a/Scoliosis.json +++ b/Scoliosis.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Quantification", "scm_revision": "master", - "scm_url": "https://github.com/SlicerIGT/Scoliosis.git" + "scm_url": "https://github.com/SlicerIGT/Scoliosis.git", + "tier": 1 } diff --git a/ScriptEditor.json b/ScriptEditor.json index c765f419d..859c62030 100644 --- a/ScriptEditor.json +++ b/ScriptEditor.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Developer Tools", "scm_revision": "main", - "scm_url": "https://github.com/SlicerMorph/SlicerScriptEditor" + "scm_url": "https://github.com/SlicerMorph/SlicerScriptEditor", + "tier": 3 } diff --git a/SegmentEditorExtraEffects.json b/SegmentEditorExtraEffects.json index 21baf7002..9ef7826f8 100644 --- a/SegmentEditorExtraEffects.json +++ b/SegmentEditorExtraEffects.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["MarkupsToModel"], "build_subdirectory": ".", "category": "Segmentation", "scm_revision": "master", - "scm_url": "https://github.com/lassoan/SlicerSegmentEditorExtraEffects" + "scm_url": "https://github.com/lassoan/SlicerSegmentEditorExtraEffects", + "tier": 5 } diff --git a/SegmentMesher.json b/SegmentMesher.json index 52a73f370..2efd10277 100644 --- a/SegmentMesher.json +++ b/SegmentMesher.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": "inner-build", "category": "Segmentation", "scm_revision": "master", - "scm_url": "https://github.com/lassoan/SlicerSegmentMesher.git" + "scm_url": "https://github.com/lassoan/SlicerSegmentMesher.git", + "tier": 5 } diff --git a/SegmentRegistration.json b/SegmentRegistration.json index 7b012d99f..28b7f3734 100644 --- a/SegmentRegistration.json +++ b/SegmentRegistration.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["SlicerProstate", "SlicerRT"], "build_subdirectory": ".", "category": "Registration", "scm_revision": "master", - "scm_url": "https://github.com/SlicerRt/SegmentRegistration.git" + "scm_url": "https://github.com/SlicerRt/SegmentRegistration.git", + "tier": 3 } diff --git a/SegmentWithSAM.json b/SegmentWithSAM.json index e1be836e7..b96b9c69f 100644 --- a/SegmentWithSAM.json +++ b/SegmentWithSAM.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["PyTorch"], "build_subdirectory": ".", "category": "Segmentation", "scm_revision": "main", - "scm_url": "https://github.com/mazurowski-lab/SlicerSegmentWithSAM" + "scm_url": "https://github.com/mazurowski-lab/SlicerSegmentWithSAM", + "tier": 3 } diff --git a/SegmentationAidedRegistration.json b/SegmentationAidedRegistration.json index 6447456d6..94c2b2709 100644 --- a/SegmentationAidedRegistration.json +++ b/SegmentationAidedRegistration.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Registration", "scm_revision": "master", - "scm_url": "https://github.com/gaoyi/SegmentationAidedRegistration.git" + "scm_url": "https://github.com/gaoyi/SegmentationAidedRegistration.git", + "tier": 1 } diff --git a/SegmentationReview.json b/SegmentationReview.json index ba21127c8..e87d34287 100644 --- a/SegmentationReview.json +++ b/SegmentationReview.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Segmentation", "scm_revision": "main", - "scm_url": "https://github.com/zapaishchykova/SegmentationReview" + "scm_url": "https://github.com/zapaishchykova/SegmentationReview", + "tier": 3 } diff --git a/SegmentationVerification.json b/SegmentationVerification.json index 7e30f6a71..468091dca 100644 --- a/SegmentationVerification.json +++ b/SegmentationVerification.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Segmentation", "scm_revision": "main", - "scm_url": "https://github.com/cpinter/SlicerSegmentationVerification.git" + "scm_url": "https://github.com/cpinter/SlicerSegmentationVerification.git", + "tier": 3 } diff --git a/SequenceRegistration.json b/SequenceRegistration.json index 911d15155..2305ddc9f 100644 --- a/SequenceRegistration.json +++ b/SequenceRegistration.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["SlicerElastix"], "build_subdirectory": ".", "category": "Sequences", "scm_revision": "master", - "scm_url": "https://github.com/moselhy/SlicerSequenceRegistration" + "scm_url": "https://github.com/moselhy/SlicerSequenceRegistration", + "tier": 5 } diff --git a/ShapePopulationViewer.json b/ShapePopulationViewer.json index 5f4acee82..ed170f8a8 100644 --- a/ShapePopulationViewer.json +++ b/ShapePopulationViewer.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Shape Visualization", "scm_revision": "master", - "scm_url": "https://github.com/NIRALUser/ShapePopulationViewer.git" + "scm_url": "https://github.com/NIRALUser/ShapePopulationViewer.git", + "tier": 3 } diff --git a/ShapeRegressionExtension.json b/ShapeRegressionExtension.json index 2f3e9d155..2fd48cb67 100644 --- a/ShapeRegressionExtension.json +++ b/ShapeRegressionExtension.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": "ShapeRegressionExtension-build", "category": "Shape Regression", "scm_revision": "master", - "scm_url": "https://github.com/KitwareMedical/ShapeRegressionExtension.git" + "scm_url": "https://github.com/KitwareMedical/ShapeRegressionExtension.git", + "tier": 3 } diff --git a/ShapeVariationAnalyzer.json b/ShapeVariationAnalyzer.json index d9059fd9b..064d8fcb7 100644 --- a/ShapeVariationAnalyzer.json +++ b/ShapeVariationAnalyzer.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["ShapePopulationViewer"], "build_subdirectory": "inner-build", "category": "Quantification", "scm_revision": "master", - "scm_url": "https://github.com/DCBIA-OrthoLab/ShapeVariationAnalyzer.git" + "scm_url": "https://github.com/DCBIA-OrthoLab/ShapeVariationAnalyzer.git", + "tier": 3 } diff --git a/SkeletalRepresentation.json b/SkeletalRepresentation.json index 7a3b712b1..362dc4d58 100644 --- a/SkeletalRepresentation.json +++ b/SkeletalRepresentation.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": "inner-build", "category": "Shape Analysis", "scm_revision": "master", - "scm_url": "https://github.com/KitwareMedical/SlicerSkeletalRepresentation.git" + "scm_url": "https://github.com/KitwareMedical/SlicerSkeletalRepresentation.git", + "tier": 3 } diff --git a/SkinMouldGenerator.json b/SkinMouldGenerator.json index 3b86c87c4..6296f0b52 100644 --- a/SkinMouldGenerator.json +++ b/SkinMouldGenerator.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Radiotherapy", "scm_revision": "master", - "scm_url": "https://github.com/PerkLab/SlicerSkinMouldGenerator.git" + "scm_url": "https://github.com/PerkLab/SlicerSkinMouldGenerator.git", + "tier": 3 } diff --git a/SkullStripper.json b/SkullStripper.json index 82a72cbd8..4f57a882d 100644 --- a/SkullStripper.json +++ b/SkullStripper.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Segmentation", "scm_revision": "master", - "scm_url": "https://github.com/Slicer/SkullStripper.git" + "scm_url": "https://github.com/Slicer/SkullStripper.git", + "tier": 3 } diff --git a/SlicerAIGT.json b/SlicerAIGT.json index 99d1b66d4..28b9f7c66 100644 --- a/SlicerAIGT.json +++ b/SlicerAIGT.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["SlicerOpenIGTLink", "SlicerIGT"], "build_subdirectory": ".", "category": "IGT", "scm_revision": "master", - "scm_url": "https://github.com/SlicerIGT/aigt.git" + "scm_url": "https://github.com/SlicerIGT/aigt.git", + "tier": 1 } diff --git a/SlicerANTs.json b/SlicerANTs.json index 4b69c45f9..8910042be 100644 --- a/SlicerANTs.json +++ b/SlicerANTs.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": "inner-build", "category": "Registration", "scm_revision": "master", - "scm_url": "https://github.com/netstim/SlicerANTs.git" + "scm_url": "https://github.com/netstim/SlicerANTs.git", + "tier": 3 } diff --git a/SlicerAutoscoperM.json b/SlicerAutoscoperM.json index 9dd18e272..d3dccefa1 100644 --- a/SlicerAutoscoperM.json +++ b/SlicerAutoscoperM.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["Sandbox", "SegmentEditorExtraEffects"], "build_subdirectory": "inner-build", "category": "Tracking", "scm_revision": "main", - "scm_url": "https://github.com/BrownBiomechanics/SlicerAutoscoperM.git" + "scm_url": "https://github.com/BrownBiomechanics/SlicerAutoscoperM.git", + "tier": 3 } diff --git a/SlicerBatchAnonymize.json b/SlicerBatchAnonymize.json index 525b31321..75aebc975 100644 --- a/SlicerBatchAnonymize.json +++ b/SlicerBatchAnonymize.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "DSCI", "scm_revision": "main", - "scm_url": "https://github.com/hina-shah/SlicerBatchAnonymize.git" + "scm_url": "https://github.com/hina-shah/SlicerBatchAnonymize.git", + "tier": 3 } diff --git a/SlicerBiomech.json b/SlicerBiomech.json index bd7635439..dff42626f 100644 --- a/SlicerBiomech.json +++ b/SlicerBiomech.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["SlicerMorph"], "build_subdirectory": ".", "category": "Quantification", "scm_revision": "main", - "scm_url": "https://github.com/jmhuie/SlicerBiomech.git" + "scm_url": "https://github.com/jmhuie/SlicerBiomech.git", + "tier": 3 } diff --git a/SlicerCMF.json b/SlicerCMF.json index 1f463d876..b3d1ebe89 100644 --- a/SlicerCMF.json +++ b/SlicerCMF.json @@ -1,5 +1,5 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [ "AnglePlanesExtension", "BoneTextureExtension", @@ -18,5 +18,6 @@ "build_subdirectory": ".", "category": "SlicerCMF", "scm_revision": "master", - "scm_url": "https://github.com/DCBIA-OrthoLab/SlicerCMF.git" + "scm_url": "https://github.com/DCBIA-OrthoLab/SlicerCMF.git", + "tier": 3 } diff --git a/SlicerCaseIterator.json b/SlicerCaseIterator.json index 1ba756605..251cfd27e 100644 --- a/SlicerCaseIterator.json +++ b/SlicerCaseIterator.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["SlicerDevelopmentToolbox"], "build_subdirectory": ".", "category": "Utilities", "scm_revision": "master", - "scm_url": "https://github.com/JoostJM/SlicerCaseIterator.git" + "scm_url": "https://github.com/JoostJM/SlicerCaseIterator.git", + "tier": 3 } diff --git a/SlicerCervicalSpine.json b/SlicerCervicalSpine.json index a2ac5148d..b16db041c 100644 --- a/SlicerCervicalSpine.json +++ b/SlicerCervicalSpine.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["SlicerCochlea"], "build_subdirectory": ".", "category": "VisSimTools", "scm_revision": "master", - "scm_url": "https://github.com/MedicalImageAnalysisTutorials/SlicerCervicalSpine" + "scm_url": "https://github.com/MedicalImageAnalysisTutorials/SlicerCervicalSpine", + "tier": 3 } diff --git a/SlicerCineTrack.json b/SlicerCineTrack.json index 8fcbc680e..90042fab6 100644 --- a/SlicerCineTrack.json +++ b/SlicerCineTrack.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Sequences", "scm_revision": "main", - "scm_url": "https://github.com/laboratory-for-translational-medicine/SlicerCineTrack" + "scm_url": "https://github.com/laboratory-for-translational-medicine/SlicerCineTrack", + "tier": 3 } diff --git a/SlicerCochlea.json b/SlicerCochlea.json index 07ad3cd9c..d08661815 100644 --- a/SlicerCochlea.json +++ b/SlicerCochlea.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["SlicerElastix"], "build_subdirectory": ".", "category": "VisSimTools", "scm_revision": "master", - "scm_url": "https://github.com/MedicalImageAnalysisTutorials/SlicerCochlea" + "scm_url": "https://github.com/MedicalImageAnalysisTutorials/SlicerCochlea", + "tier": 3 } diff --git a/SlicerConda.json b/SlicerConda.json index 4cd914583..6c879af3a 100644 --- a/SlicerConda.json +++ b/SlicerConda.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Conda", "scm_revision": "main", - "scm_url": "https://github.com/DCBIA-OrthoLab/SlicerConda.git" + "scm_url": "https://github.com/DCBIA-OrthoLab/SlicerConda.git", + "tier": 1 } diff --git a/SlicerDMRI.json b/SlicerDMRI.json index 94c9bcef3..5c144e38a 100644 --- a/SlicerDMRI.json +++ b/SlicerDMRI.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["UKFTractography"], "build_subdirectory": "inner-build", "category": "Diffusion", "scm_revision": "master", - "scm_url": "https://github.com/SlicerDMRI/SlicerDMRI.git" + "scm_url": "https://github.com/SlicerDMRI/SlicerDMRI.git", + "tier": 5 } diff --git a/SlicerDTIALPS.json b/SlicerDTIALPS.json index ea385c87b..667e35c9a 100644 --- a/SlicerDTIALPS.json +++ b/SlicerDTIALPS.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Diffusion", "scm_revision": "main", - "scm_url": "https://github.com/LOAMRI/Slicer-DTI-ALPS.git" + "scm_url": "https://github.com/LOAMRI/Slicer-DTI-ALPS.git", + "tier": 3 } diff --git a/SlicerDcm2nii.json b/SlicerDcm2nii.json index 0c9f62b0c..c1630847f 100644 --- a/SlicerDcm2nii.json +++ b/SlicerDcm2nii.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": "inner-build", "category": "Diffusion", "scm_revision": "master", - "scm_url": "https://github.com/SlicerDMRI/SlicerDcm2nii.git" + "scm_url": "https://github.com/SlicerDMRI/SlicerDcm2nii.git", + "tier": 5 } diff --git a/SlicerDentalModelSeg.json b/SlicerDentalModelSeg.json index 61ea025b5..afc95a1fa 100644 --- a/SlicerDentalModelSeg.json +++ b/SlicerDentalModelSeg.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Segmentation", "scm_revision": "main", - "scm_url": "https://github.com/DCBIA-OrthoLab/SlicerDentalModelSeg.git" + "scm_url": "https://github.com/DCBIA-OrthoLab/SlicerDentalModelSeg.git", + "tier": 1 } diff --git a/SlicerDevelopmentToolbox.json b/SlicerDevelopmentToolbox.json index 2f00be82f..58e1c53ab 100644 --- a/SlicerDevelopmentToolbox.json +++ b/SlicerDevelopmentToolbox.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Developer Tools", "scm_revision": "master", - "scm_url": "https://github.com/QIICR/SlicerDevelopmentToolbox.git" + "scm_url": "https://github.com/QIICR/SlicerDevelopmentToolbox.git", + "tier": 3 } diff --git a/SlicerDiffusionComplexityMap.json b/SlicerDiffusionComplexityMap.json index 66f1238cf..5a5e194c1 100644 --- a/SlicerDiffusionComplexityMap.json +++ b/SlicerDiffusionComplexityMap.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Diffusion", "scm_revision": "main", - "scm_url": "https://github.com/CSIM-Toolkits/SlicerDiffusionComplexityMap.git" + "scm_url": "https://github.com/CSIM-Toolkits/SlicerDiffusionComplexityMap.git", + "tier": 3 } diff --git a/SlicerElastix.json b/SlicerElastix.json index 7713663a3..f13babe39 100644 --- a/SlicerElastix.json +++ b/SlicerElastix.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": "inner-build", "category": "Registration", "scm_revision": "master", - "scm_url": "https://github.com/lassoan/SlicerElastix.git" + "scm_url": "https://github.com/lassoan/SlicerElastix.git", + "tier": 5 } diff --git a/SlicerFab.json b/SlicerFab.json index 33b834f82..4b79c3ac0 100644 --- a/SlicerFab.json +++ b/SlicerFab.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Printing", "scm_revision": "master", - "scm_url": "https://github.com/SlicerFab/SlicerFab" + "scm_url": "https://github.com/SlicerFab/SlicerFab", + "tier": 3 } diff --git a/SlicerFreeSurfer.json b/SlicerFreeSurfer.json index f61ee62b4..b3d0846b4 100644 --- a/SlicerFreeSurfer.json +++ b/SlicerFreeSurfer.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Neuroimaging", "scm_revision": "master", - "scm_url": "https://github.com/PerkLab/SlicerFreeSurfer.git" + "scm_url": "https://github.com/PerkLab/SlicerFreeSurfer.git", + "tier": 5 } diff --git a/SlicerHeart.json b/SlicerHeart.json index d7a15c242..dee00232c 100644 --- a/SlicerHeart.json +++ b/SlicerHeart.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["SlicerIGT"], "build_subdirectory": "inner-build", "category": "Cardiac", "scm_revision": "master", - "scm_url": "https://github.com/SlicerHeart/SlicerHeart.git" + "scm_url": "https://github.com/SlicerHeart/SlicerHeart.git", + "tier": 5 } diff --git a/SlicerIGSIO.json b/SlicerIGSIO.json index aad2000d3..95dc5687d 100644 --- a/SlicerIGSIO.json +++ b/SlicerIGSIO.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": "inner-build", "category": "IGT", "scm_revision": "master", - "scm_url": "https://github.com/IGSIO/SlicerIGSIO.git" + "scm_url": "https://github.com/IGSIO/SlicerIGSIO.git", + "tier": 5 } diff --git a/SlicerIGT.json b/SlicerIGT.json index 664974115..40ba8f54a 100644 --- a/SlicerIGT.json +++ b/SlicerIGT.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["SlicerIGSIO"], "build_subdirectory": ".", "category": "IGT", "scm_revision": "master", - "scm_url": "https://github.com/SlicerIGT/SlicerIGT.git" + "scm_url": "https://github.com/SlicerIGT/SlicerIGT.git", + "tier": 5 } diff --git a/SlicerITKUltrasound.json b/SlicerITKUltrasound.json index d3cea522d..2c1b66192 100644 --- a/SlicerITKUltrasound.json +++ b/SlicerITKUltrasound.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": "SlicerITKUltrasound-build", "category": "Filtering", "scm_revision": "master", - "scm_url": "https://github.com/KitwareMedical/SlicerITKUltrasound" + "scm_url": "https://github.com/KitwareMedical/SlicerITKUltrasound", + "tier": 1 } diff --git a/SlicerJupyter.json b/SlicerJupyter.json index 159bf0b3e..07f97d2b3 100644 --- a/SlicerJupyter.json +++ b/SlicerJupyter.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": "inner-build", "category": "Developer Tools", "scm_revision": "master", - "scm_url": "https://github.com/Slicer/SlicerJupyter.git" + "scm_url": "https://github.com/Slicer/SlicerJupyter.git", + "tier": 3 } diff --git a/SlicerLayoutButtons.json b/SlicerLayoutButtons.json index 770aef467..ebbfffabd 100644 --- a/SlicerLayoutButtons.json +++ b/SlicerLayoutButtons.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["SlicerDevelopmentToolbox"], "build_subdirectory": ".", "category": "Informatics", "scm_revision": "master", - "scm_url": "https://github.com/QIICR/SlicerLayoutButtons.git" + "scm_url": "https://github.com/QIICR/SlicerLayoutButtons.git", + "tier": 3 } diff --git a/SlicerLiver.json b/SlicerLiver.json index 1d216a961..e1a1758b2 100644 --- a/SlicerLiver.json +++ b/SlicerLiver.json @@ -1,5 +1,5 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [ "SlicerVMTK", "SegmentEditorExtraEffects", @@ -8,5 +8,6 @@ "build_subdirectory": ".", "category": "IGT", "scm_revision": "master", - "scm_url": "https://github.com/ALive-research/Slicer-Liver" + "scm_url": "https://github.com/ALive-research/Slicer-Liver", + "tier": 3 } diff --git a/SlicerLookingGlass.json b/SlicerLookingGlass.json index e92cfdfaa..d0c39ce6b 100644 --- a/SlicerLookingGlass.json +++ b/SlicerLookingGlass.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": "inner-build", "category": "Holographic Display", "scm_revision": "master", - "scm_url": "https://github.com/KitwareMedical/SlicerLookingGlass.git" + "scm_url": "https://github.com/KitwareMedical/SlicerLookingGlass.git", + "tier": 1 } diff --git a/SlicerMarkupConstraints.json b/SlicerMarkupConstraints.json index 265e58e77..e026777b6 100644 --- a/SlicerMarkupConstraints.json +++ b/SlicerMarkupConstraints.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Developer Tools", "scm_revision": "main", - "scm_url": "https://github.com/KitwareMedical/SlicerMarkupConstraints.git" + "scm_url": "https://github.com/KitwareMedical/SlicerMarkupConstraints.git", + "tier": 3 } diff --git a/SlicerMorph.json b/SlicerMorph.json index cff6e0358..16dec181c 100644 --- a/SlicerMorph.json +++ b/SlicerMorph.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["SegmentEditorExtraEffects", "SurfaceMarkup"], "build_subdirectory": ".", "category": "SlicerMorph", "scm_revision": "master", - "scm_url": "https://github.com/SlicerMorph/SlicerMorph.git" + "scm_url": "https://github.com/SlicerMorph/SlicerMorph.git", + "tier": 5 } diff --git a/SlicerNetstim.json b/SlicerNetstim.json index 57dcf7c13..4ad6e3227 100644 --- a/SlicerNetstim.json +++ b/SlicerNetstim.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["SlicerRT", "MarkupsToModel"], "build_subdirectory": ".", "category": "Netstim", "scm_revision": "master", - "scm_url": "https://github.com/netstim/SlicerNetstim.git" + "scm_url": "https://github.com/netstim/SlicerNetstim.git", + "tier": 3 } diff --git a/SlicerNeuro.json b/SlicerNeuro.json index 1b6fa56cd..06eed658b 100644 --- a/SlicerNeuro.json +++ b/SlicerNeuro.json @@ -1,5 +1,5 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [ "UKFTractography", "SwissSkullStripper", @@ -12,5 +12,6 @@ "build_subdirectory": ".", "category": "Neuroimaging", "scm_revision": "main", - "scm_url": "https://github.com/Slicer/SlicerNeuro" + "scm_url": "https://github.com/Slicer/SlicerNeuro", + "tier": 5 } diff --git a/SlicerNeuroSegmentation.json b/SlicerNeuroSegmentation.json index e86fc7419..84c91aeb1 100644 --- a/SlicerNeuroSegmentation.json +++ b/SlicerNeuroSegmentation.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["SlicerFreeSurfer"], "build_subdirectory": ".", "category": "Neuroimaging", "scm_revision": "main", - "scm_url": "https://github.com/HOA-2/SlicerNeuroSegmentation.git" + "scm_url": "https://github.com/HOA-2/SlicerNeuroSegmentation.git", + "tier": 3 } diff --git a/SlicerOpenAnatomy.json b/SlicerOpenAnatomy.json index 0f3603d86..12beb41b1 100644 --- a/SlicerOpenAnatomy.json +++ b/SlicerOpenAnatomy.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Segmentation", "scm_revision": "master", - "scm_url": "https://github.com/PerkLab/SlicerOpenAnatomy" + "scm_url": "https://github.com/PerkLab/SlicerOpenAnatomy", + "tier": 5 } diff --git a/SlicerOpenIGTLink.json b/SlicerOpenIGTLink.json index f1abdc239..89893045c 100644 --- a/SlicerOpenIGTLink.json +++ b/SlicerOpenIGTLink.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": "inner-build", "category": "IGT", "scm_revision": "master", - "scm_url": "https://github.com/openigtlink/SlicerOpenIGTLink.git" + "scm_url": "https://github.com/openigtlink/SlicerOpenIGTLink.git", + "tier": 5 } diff --git a/SlicerPRISMRendering.json b/SlicerPRISMRendering.json index f47570534..e07647594 100644 --- a/SlicerPRISMRendering.json +++ b/SlicerPRISMRendering.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Rendering", "scm_revision": "master", - "scm_url": "https://github.com/ETS-vis-interactive/SlicerPRISMRendering" + "scm_url": "https://github.com/ETS-vis-interactive/SlicerPRISMRendering", + "tier": 3 } diff --git a/SlicerProstate.json b/SlicerProstate.json index 00679512c..56297666b 100644 --- a/SlicerProstate.json +++ b/SlicerProstate.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Informatics", "scm_revision": "master", - "scm_url": "https://github.com/SlicerProstate/SlicerProstate.git" + "scm_url": "https://github.com/SlicerProstate/SlicerProstate.git", + "tier": 3 } diff --git a/SlicerProstateAblation.json b/SlicerProstateAblation.json index 00b490379..cfd329498 100644 --- a/SlicerProstateAblation.json +++ b/SlicerProstateAblation.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["SlicerDevelopmentToolbox", "ZFrameRegistration"], "build_subdirectory": ".", "category": "IGT", "scm_revision": "master", - "scm_url": "https://github.com/SlicerProstate/SlicerProstateAblation.git" + "scm_url": "https://github.com/SlicerProstate/SlicerProstateAblation.git", + "tier": 3 } diff --git a/SlicerPythonTestRunner.json b/SlicerPythonTestRunner.json index 33fd10f66..682a67783 100644 --- a/SlicerPythonTestRunner.json +++ b/SlicerPythonTestRunner.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Developer Tools", "scm_revision": "main", - "scm_url": "https://github.com/KitwareMedical/SlicerPythonTestRunner" + "scm_url": "https://github.com/KitwareMedical/SlicerPythonTestRunner", + "tier": 3 } diff --git a/SlicerRT.json b/SlicerRT.json index 1d724c7ef..b4ae4236e 100644 --- a/SlicerRT.json +++ b/SlicerRT.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": "inner-build", "category": "Radiotherapy", "scm_revision": "master", - "scm_url": "https://github.com/SlicerRt/SlicerRT.git" + "scm_url": "https://github.com/SlicerRt/SlicerRT.git", + "tier": 5 } diff --git a/SlicerRadiomics.json b/SlicerRadiomics.json index 87a9784aa..1c8c5a512 100644 --- a/SlicerRadiomics.json +++ b/SlicerRadiomics.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": "inner-build", "category": "Informatics", "scm_revision": "master", - "scm_url": "https://github.com/AIM-Harvard/SlicerRadiomics.git" + "scm_url": "https://github.com/AIM-Harvard/SlicerRadiomics.git", + "tier": 1 } diff --git a/SlicerThemes.json b/SlicerThemes.json index 9ef035c06..e5e160138 100644 --- a/SlicerThemes.json +++ b/SlicerThemes.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Developer Tools", "scm_revision": "main", - "scm_url": "https://github.com/sjh26/SlicerThemes.git" + "scm_url": "https://github.com/sjh26/SlicerThemes.git", + "tier": 3 } diff --git a/SlicerToKiwiExporter.json b/SlicerToKiwiExporter.json index 074f28c0e..65cbf04bc 100644 --- a/SlicerToKiwiExporter.json +++ b/SlicerToKiwiExporter.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Exporter", "scm_revision": "master", - "scm_url": "https://github.com/jcfr/SlicerToKiwiExporter.git" + "scm_url": "https://github.com/jcfr/SlicerToKiwiExporter.git", + "tier": 1 } diff --git a/SlicerVMTK.json b/SlicerVMTK.json index 0b8b4323d..8a60cee2b 100644 --- a/SlicerVMTK.json +++ b/SlicerVMTK.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["ExtraMarkups"], "build_subdirectory": "inner-build", "category": "Vascular Modeling Toolkit", "scm_revision": "master", - "scm_url": "https://github.com/vmtk/SlicerExtension-VMTK" + "scm_url": "https://github.com/vmtk/SlicerExtension-VMTK", + "tier": 5 } diff --git a/SlicerVirtualMouseCursor.json b/SlicerVirtualMouseCursor.json index 409870ff1..9770036ff 100644 --- a/SlicerVirtualMouseCursor.json +++ b/SlicerVirtualMouseCursor.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Utilities", "scm_revision": "main", - "scm_url": "https://github.com/KitwareMedical/SlicerVirtualMouseCursor" + "scm_url": "https://github.com/KitwareMedical/SlicerVirtualMouseCursor", + "tier": 3 } diff --git a/SlicerVirtualReality.json b/SlicerVirtualReality.json index 5caec940f..05d1aa738 100644 --- a/SlicerVirtualReality.json +++ b/SlicerVirtualReality.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": "inner-build", "category": "Virtual Reality", "scm_revision": "master", - "scm_url": "https://github.com/KitwareMedical/SlicerVirtualReality.git" + "scm_url": "https://github.com/KitwareMedical/SlicerVirtualReality.git", + "tier": 5 } diff --git a/SlicerWMA.json b/SlicerWMA.json index a9ee81b95..eb0e0dff7 100644 --- a/SlicerWMA.json +++ b/SlicerWMA.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": "inner-build", "category": "Libraries", "scm_revision": "master", - "scm_url": "https://github.com/SlicerDMRI/SlicerWMA" + "scm_url": "https://github.com/SlicerDMRI/SlicerWMA", + "tier": 3 } diff --git a/SoundControl.json b/SoundControl.json index efc085f66..0f1f68353 100644 --- a/SoundControl.json +++ b/SoundControl.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "IGT", "scm_revision": "master", - "scm_url": "https://github.com/SlicerIGT/SlicerSoundControl" + "scm_url": "https://github.com/SlicerIGT/SlicerSoundControl", + "tier": 3 } diff --git a/Stereotaxia.json b/Stereotaxia.json index be1a99671..2bc118a99 100644 --- a/Stereotaxia.json +++ b/Stereotaxia.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "IGT", "scm_revision": "main", - "scm_url": "https://github.com/JBeninca/SlicerStereotaxia" + "scm_url": "https://github.com/JBeninca/SlicerStereotaxia", + "tier": 3 } diff --git a/SurfaceFragmentsRegistration.json b/SurfaceFragmentsRegistration.json index 3420a8758..3623d3631 100644 --- a/SurfaceFragmentsRegistration.json +++ b/SurfaceFragmentsRegistration.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Registration", "scm_revision": "master", - "scm_url": "https://github.com/sebastianandress/Slicer-SurfaceFragmentsRegistration.git" + "scm_url": "https://github.com/sebastianandress/Slicer-SurfaceFragmentsRegistration.git", + "tier": 3 } diff --git a/SurfaceLearner.json b/SurfaceLearner.json index 0b57ec832..edda71904 100644 --- a/SurfaceLearner.json +++ b/SurfaceLearner.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "SurfaceLearner", "scm_revision": "main", - "scm_url": "https://github.com/mturja-vf-ic-bd/SlicerSurfaceLearner" + "scm_url": "https://github.com/mturja-vf-ic-bd/SlicerSurfaceLearner", + "tier": 3 } diff --git a/SurfaceMarkup.json b/SurfaceMarkup.json index 80ea933a9..8da997c23 100644 --- a/SurfaceMarkup.json +++ b/SurfaceMarkup.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Informatics", "scm_revision": "master", - "scm_url": "https://github.com/SlicerHeart/SlicerSurfaceMarkup.git" + "scm_url": "https://github.com/SlicerHeart/SlicerSurfaceMarkup.git", + "tier": 3 } diff --git a/SurfaceWrapSolidify.json b/SurfaceWrapSolidify.json index aa26c0823..536cd86b9 100644 --- a/SurfaceWrapSolidify.json +++ b/SurfaceWrapSolidify.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Segmentation", "scm_revision": "master", - "scm_url": "https://github.com/sebastianandress/Slicer-SurfaceWrapSolidify.git" + "scm_url": "https://github.com/sebastianandress/Slicer-SurfaceWrapSolidify.git", + "tier": 5 } diff --git a/SwissSkullStripper.json b/SwissSkullStripper.json index a94f001f3..8e7df175e 100644 --- a/SwissSkullStripper.json +++ b/SwissSkullStripper.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Segmentation", "scm_revision": "master", - "scm_url": "https://github.com/lassoan/SlicerSwissSkullStripper" + "scm_url": "https://github.com/lassoan/SlicerSwissSkullStripper", + "tier": 3 } diff --git a/T1Mapping.json b/T1Mapping.json index 11945ba40..1aa1a5ed8 100644 --- a/T1Mapping.json +++ b/T1Mapping.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Quantification", "scm_revision": "master", - "scm_url": "https://github.com/QIICR/T1Mapping.git" + "scm_url": "https://github.com/QIICR/T1Mapping.git", + "tier": 3 } diff --git a/T1_ECVMapping.json b/T1_ECVMapping.json index 69e596e99..793b1ba6e 100644 --- a/T1_ECVMapping.json +++ b/T1_ECVMapping.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Cardiac", "scm_revision": "master", - "scm_url": "https://github.com/RivettiLuciano/SlicerT1_ECVMapping.git" + "scm_url": "https://github.com/RivettiLuciano/SlicerT1_ECVMapping.git", + "tier": 3 } diff --git a/T2mapping.json b/T2mapping.json index e5db67329..f31b9f905 100644 --- a/T2mapping.json +++ b/T2mapping.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Quantification", "scm_revision": "master", - "scm_url": "https://github.com/gattia/Slicer-T2mapping" + "scm_url": "https://github.com/gattia/Slicer-T2mapping", + "tier": 3 } diff --git a/TCIABrowser.json b/TCIABrowser.json index bc1e1d4ec..3ebc050e0 100644 --- a/TCIABrowser.json +++ b/TCIABrowser.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["QuantitativeReporting", "SlicerRT"], "build_subdirectory": ".", "category": "Informatics", "scm_revision": "master", - "scm_url": "https://github.com/QIICR/TCIABrowser.git" + "scm_url": "https://github.com/QIICR/TCIABrowser.git", + "tier": 3 } diff --git a/TITAN.json b/TITAN.json index 5a32354aa..8afcc64f2 100644 --- a/TITAN.json +++ b/TITAN.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Analysis", "scm_revision": "master", - "scm_url": "https://github.com/SlicerMicro/Slicer-TITAN" + "scm_url": "https://github.com/SlicerMicro/Slicer-TITAN", + "tier": 3 } diff --git a/TOMAAT.json b/TOMAAT.json index 3e54c941e..ade6dd738 100644 --- a/TOMAAT.json +++ b/TOMAAT.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Segmentation", "scm_revision": "master", - "scm_url": "https://github.com/faustomilletari/TOMAAT-Slicer.git" + "scm_url": "https://github.com/faustomilletari/TOMAAT-Slicer.git", + "tier": 1 } diff --git a/TissueSegmentation.json b/TissueSegmentation.json index 8d7c128cd..d0ad9cff5 100644 --- a/TissueSegmentation.json +++ b/TissueSegmentation.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Segmentation", "scm_revision": "main", - "scm_url": "https://github.com/MarinaSandonis/SlicerTissueSegmentation" + "scm_url": "https://github.com/MarinaSandonis/SlicerTissueSegmentation", + "tier": 1 } diff --git a/TomoSAM.json b/TomoSAM.json index 57b19d623..a1d299352 100644 --- a/TomoSAM.json +++ b/TomoSAM.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["PyTorch"], "build_subdirectory": ".", "category": "Segmentation", "scm_revision": "main", - "scm_url": "https://github.com/fsemerar/SlicerTomoSAM.git" + "scm_url": "https://github.com/fsemerar/SlicerTomoSAM.git", + "tier": 3 } diff --git a/TorchIO.json b/TorchIO.json index 987335b04..6bd591c4c 100644 --- a/TorchIO.json +++ b/TorchIO.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["PyTorch"], "build_subdirectory": ".", "category": "Utilities", "scm_revision": "main", - "scm_url": "https://github.com/fepegar/SlicerTorchIO.git" + "scm_url": "https://github.com/fepegar/SlicerTorchIO.git", + "tier": 3 } diff --git a/TotalSegmentator.json b/TotalSegmentator.json index 916c608d6..6696fdda5 100644 --- a/TotalSegmentator.json +++ b/TotalSegmentator.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["PyTorch"], "build_subdirectory": ".", "category": "Segmentation", "scm_revision": "main", - "scm_url": "https://github.com/lassoan/SlicerTotalSegmentator" + "scm_url": "https://github.com/lassoan/SlicerTotalSegmentator", + "tier": 5 } diff --git a/TrackingErrorInspector.json b/TrackingErrorInspector.json index a8d20e58b..b7d1e32ac 100644 --- a/TrackingErrorInspector.json +++ b/TrackingErrorInspector.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "IGT", "scm_revision": "master", - "scm_url": "https://github.com/SlicerIGT/SlicerTrackingErrorInspector" + "scm_url": "https://github.com/SlicerIGT/SlicerTrackingErrorInspector", + "tier": 3 } diff --git a/UHFMRTools.json b/UHFMRTools.json index b7b8f1503..70c97f94f 100644 --- a/UHFMRTools.json +++ b/UHFMRTools.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Filtering", "scm_revision": "trunk", - "scm_url": "https://github.com/harellab/SlicerUHFMRTools" + "scm_url": "https://github.com/harellab/SlicerUHFMRTools", + "tier": 3 } diff --git a/UKFTractography.json b/UKFTractography.json index 9c94413ac..887ee10ba 100644 --- a/UKFTractography.json +++ b/UKFTractography.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Tractography", "scm_revision": "master", - "scm_url": "https://github.com/pnlbwh/ukftractography.git" + "scm_url": "https://github.com/pnlbwh/ukftractography.git", + "tier": 5 } diff --git a/Ultrasound.json b/Ultrasound.json index 442b06fac..5b1c935d2 100644 --- a/Ultrasound.json +++ b/Ultrasound.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Ultrasound", "scm_revision": "main", - "scm_url": "https://github.com/SlicerUltrasound/SlicerUltrasound.git" + "scm_url": "https://github.com/SlicerUltrasound/SlicerUltrasound.git", + "tier": 3 } diff --git a/VASSTAlgorithms.json b/VASSTAlgorithms.json index 3e1f91d1a..64d5222a1 100644 --- a/VASSTAlgorithms.json +++ b/VASSTAlgorithms.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Registration", "scm_revision": "4.11", - "scm_url": "https://github.com/VASST/VASSTAlgorithms.git" + "scm_url": "https://github.com/VASST/VASSTAlgorithms.git", + "tier": 3 } diff --git a/VolumeClip.json b/VolumeClip.json index 844608941..0c22203a8 100644 --- a/VolumeClip.json +++ b/VolumeClip.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Segmentation", "scm_revision": "master", - "scm_url": "https://github.com/PerkLab/SlicerVolumeClip.git" + "scm_url": "https://github.com/PerkLab/SlicerVolumeClip.git", + "tier": 3 } diff --git a/XNATSlicer.json b/XNATSlicer.json index a921e3885..48193a905 100644 --- a/XNATSlicer.json +++ b/XNATSlicer.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Remote", "scm_revision": "master", - "scm_url": "https://github.com/NrgXnat/XNATSlicer.git" + "scm_url": "https://github.com/NrgXnat/XNATSlicer.git", + "tier": 3 } diff --git a/ZFrameRegistration.json b/ZFrameRegistration.json index f9fdede2f..9e0233a45 100644 --- a/ZFrameRegistration.json +++ b/ZFrameRegistration.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": ["SlicerDevelopmentToolbox"], "build_subdirectory": ".", "category": "IGT", "scm_revision": "master", - "scm_url": "https://github.com/SlicerProstate/SlicerZFrameRegistration.git" + "scm_url": "https://github.com/SlicerProstate/SlicerZFrameRegistration.git", + "tier": 3 } diff --git a/flywheel_connect.json b/flywheel_connect.json index 09c5f220b..0489bf47b 100644 --- a/flywheel_connect.json +++ b/flywheel_connect.json @@ -1,8 +1,9 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [], "build_subdirectory": ".", "category": "Informatics", "scm_revision": "main", - "scm_url": "https://gitlab.com/flywheel-io/scientific-solutions/app/slicer_flywheel_connect.git" + "scm_url": "https://gitlab.com/flywheel-io/scientific-solutions/app/slicer_flywheel_connect.git", + "tier": 1 } diff --git a/mpReview.json b/mpReview.json index 3432ed44f..1fa27433f 100644 --- a/mpReview.json +++ b/mpReview.json @@ -1,5 +1,5 @@ { - "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.0.json#", + "$schema": "https://raw.githubusercontent.com/Slicer/Slicer/main/Schemas/slicer-extension-catalog-entry-schema-v1.0.1.json#", "build_dependencies": [ "SlicerDevelopmentToolbox", "QuantitativeReporting", @@ -8,5 +8,6 @@ "build_subdirectory": ".", "category": "Informatics", "scm_revision": "master", - "scm_url": "https://github.com/SlicerProstate/mpReview.git" + "scm_url": "https://github.com/SlicerProstate/mpReview.git", + "tier": 3 }