Maintenance Tasks

A Rails engine for queuing and managing maintenance tasks.

By ”maintenance task”, this project means a data migration, i.e. code that changes data in the database, often to support schema migrations. For example, in order to introduce a new NOT NULL column, it has to be added as nullable first, backfilled with values, before finally being changed to NOT NULL. This engine helps with the second part of this process, backfilling.

Maintenance tasks are collection-based tasks, usually using Active Record, that update the data in your database. They can be paused or interrupted. Maintenance tasks can operate in batches and use throttling to control the load on your database.

Maintenance tasks aren't meant to happen on a regular basis. They're used as needed, or as one-offs. Normally maintenance tasks are ephemeral, so they are used briefly and then deleted.

The Rails engine has a web-based UI for listing maintenance tasks, seeing their status, and starting, pausing and restarting them.

Should I Use Maintenance Tasks?

Maintenance tasks have a limited, specific job UI. While the engine can be used to provide a user interface for other data changes, such as data changes for support requests, we recommend you use regular application code for those use cases instead. These inevitably require more flexibility than this engine will be able to provide.

If your task shouldn't run as an Active Job, it probably isn't a good match for this gem. If your task doesn't need to run in the background, consider a runner script instead. If your task doesn't need to be interruptible, consider a normal Active Job.

Maintenance tasks can be interrupted between iterations. If your task isn't collection-based (no CSV file or database table) or has very large batches, it will get limited benefit from throttling (pausing between iterations) or interrupting. This might be fine, or the added complexity of maintenance Tasks over normal Active Jobs may not be worthwhile.

If your task updates your database schema instead of data, use a migration instead of a maintenance task.

If your task happens regularly, consider Active Jobs with a scheduler or cron, job-iteration jobs and/or custom rails_admin UIs instead of the Maintenance Tasks gem. Maintenance tasks should be ephemeral, to suit their intentionally limited UI. They should not repeat.

To create seed data for a new application, use the provided Rails db/seeds.rb file instead.

If your application can't handle a half-completed migration, maintenance tasks are probably the wrong tool. Remember that maintenance tasks are intentionally pausable and can be cancelled halfway.

Installation

To install the gem and run the install generator, execute:

bundle add maintenance_tasks
bin/rails generate maintenance_tasks:install

The generator creates and runs a migration to add the necessary table to your database. It also mounts Maintenance Tasks in your config/routes.rb. By default the web UI can be accessed in the new /maintenance_tasks path.

In case you use an exception reporting service (e.g. Bugsnag) you might want to define an error handler. See Customizing the error handler for more information.

Active Job Dependency

The Maintenance Tasks framework relies on Active Job behind the scenes to run Tasks. The default queuing backend for Active Job is asynchronous. It is strongly recommended to change this to a persistent backend so that Task progress is not lost during code or infrastructure changes. For more information on configuring a queuing backend, take a look at the Active Job documentation.

Action Controller & Action View Dependency

The Maintenance Tasks framework relies on Action Controller and Action View to render the UI. If you're using Rails in API-only mode, see Using Maintenance Tasks in API-only applications.

Autoloading

The Maintenance Tasks framework does not support autoloading in :classic mode. Please ensure your application is using Zeitwerk to load your code. For more information, please consult the Rails guides on autoloading and reloading constants.

Usage

The typical Maintenance Tasks workflow is as follows:

Generate a class describing the Task and the work to be done.
Run the Task
- either by using the included web UI,
- or by using the command line,
- or by using Ruby.
Monitor the Task
- either by using the included web UI,
- or by manually checking your task’s run’s status in your database.
Optionally, delete the Task code if you no longer need it.

Creating a Task

A generator is provided to create tasks. Generate a new task by running:

bin/rails generate maintenance_tasks:task update_posts

This creates the task file app/tasks/maintenance/update_posts_task.rb.

The generated task is a subclass of MaintenanceTasks::Task that implements:

collection: return an Active Record Relation or an Array to be iterated over.
process: do the work of your maintenance task on a single record

Optionally, tasks can also implement a custom #count method, defining the number of elements that will be iterated over. Your task’s tick_total will be calculated automatically based on the collection size, but this value may be overridden if desired using the #count method (this might be done, for example, to avoid the query that would be produced to determine the size of your collection).

Example:

# app/tasks/maintenance/update_posts_task.rb

module Maintenance
  class UpdatePostsTask < MaintenanceTasks::Task
    def collection
      Post.all
    end

    def process(post)
      post.update!(content: "New content!")
    end
  end
end

Customizing the Batch Size

When processing records from an Active Record Relation, records are fetched in batches internally, and then each record is passed to the #process method. Maintenance Tasks will query the database to fetch records in batches of 100 by default, but the batch size can be modified using the collection_batch_size macro:

# app/tasks/maintenance/update_posts_task.rb

module Maintenance
  class UpdatePostsTask < MaintenanceTasks::Task
    # Fetch records in batches of 1000
    collection_batch_size(1000)

    def collection
      Post.all
    end

    def process(post)
      post.update!(content: "New content!")
    end
  end
end

Creating a CSV Task

You can also write a Task that iterates on a CSV file. Note that writing CSV Tasks requires Active Storage to be configured. Ensure that the dependency is specified in your application’s Gemfile, and that you’ve followed the setup instructions. See also Customizing which Active Storage service to use.

Generate a CSV Task by running:

bin/rails generate maintenance_tasks:task import_posts --csv

The generated task is a subclass of MaintenanceTasks::Task that implements:

process: do the work of your maintenance task on a CSV::Row

# app/tasks/maintenance/import_posts_task.rb

module Maintenance
  class ImportPostsTask < MaintenanceTasks::Task
    csv_collection

    def process(row)
      Post.create!(title: row["title"], content: row["content"])
    end
  end
end

posts.csv:

title,content
My Title,Hello World!

The files uploaded to your Active Storage service provider will be renamed to include an ISO 8601 timestamp and the Task name in snake case format.

The implicit #count method loads and parses the entire file to determine the accurate number of rows. With files with millions of rows, it takes several seconds to process. Consider skipping the count (defining a count that returns nil) or use an approximation, eg: count the number of new lines:

def count(task)
  task.csv_content.count("\n") - 1
end

CSV options

Tasks can pass options for Ruby's CSV parser by adding keyword arguments to csv_collection:

# app/tasks/maintenance/import_posts_task.rb

module Maintenance
  class ImportPosts
    csv_collection(skip_lines: /^#/, converters: ->(field) { field.strip })

    def process(row)
      Post.create!(title: row["title"], content: row["content"])
    end
  end
end

These options instruct Ruby's CSV parser to skip lines that start with a #, and removes the leading and trailing spaces from any field, so that the following file will be processed identically as the previous example:

posts.csv:

# A comment
title,content
 My Title ,Hello World!

Batch CSV Tasks

Tasks can process CSVs in batches. Add the in_batches option to your task’s csv_collection macro:

# app/tasks/maintenance/batch_import_posts_task.rb

module Maintenance
  class BatchImportPostsTask < MaintenanceTasks::Task
    csv_collection(in_batches: 50)

    def process(batch_of_rows)
      Post.insert_all(post_rows.map(&:to_h))
    end
  end
end

As with a regular CSV task, ensure you’ve implemented the following method:

process: do the work of your Task on a batch (array of CSV::Row objects).

Note that #count is calculated automatically based on the number of batches in your collection, and your Task’s progress will be displayed in terms of batches (not the total number of rows in your CSV).

Non-batched CSV tasks will have an effective batch size of 1, which can reduce the efficiency of your database operations.

Processing Batch Collections

The Maintenance Tasks gem supports processing Active Records in batches. This can reduce the number of calls your Task makes to the database. Use ActiveRecord::Batches#in_batches on the relation returned by your collection to specify that your Task should process batches instead of records. Active Record defaults to 1000 records by batch, but a custom size can be specified.

# app/tasks/maintenance/update_posts_in_batches_task.rb

module Maintenance
  class UpdatePostsInBatchesTask < MaintenanceTasks::Task
    def collection
      Post.in_batches
    end

    def process(batch_of_posts)
      batch_of_posts.update_all(content: "New content added on #{Time.now.utc}")
    end
  end
end

Ensure that you’ve implemented the following methods:

collection: return an ActiveRecord::Batches::BatchEnumerator.
process: do the work of your Task on a batch (ActiveRecord::Relation).

Note that #count is calculated automatically based on the number of batches in your collection, and your Task’s progress will be displayed in terms of batches (not the number of records in the relation).

Important! Batches should only be used if #process is performing a batch operation such as #update_all or #delete_all. If you need to iterate over individual records, you should define a collection that returns an ActiveRecord::Relation. This uses batching internally, but loads the records with one SQL query. Conversely, batch collections load the primary keys of the records of the batch first, and then perform an additional query to load the records when calling each (or any Enumerable method) inside #process.

Tasks that don’t need a Collection

Sometimes, you might want to run a Task that performs a single operation, such as enqueuing another background job or querying an external API. The gem supports collection-less tasks.

Generate a collection-less Task by running:

bin/rails generate maintenance_tasks:task no_collection_task --no-collection

The generated task is a subclass of MaintenanceTasks::Task that implements:

process: do the work of your maintenance task

# app/tasks/maintenance/no_collection_task.rb

module Maintenance
  class NoCollectionTask < MaintenanceTasks::Task
    no_collection

    def process
      SomeAsyncJob.perform_later
    end
  end
end

Tasks with Custom Enumerators

If you have a special use case requiring iteration over an unsupported collection type, such as external resources fetched from some API, you can implement the enumerator_builder(cursor:) method in your task.

This method should return an Enumerator, yielding pairs of [item, cursor]. Maintenance Tasks takes care of persisting the current cursor position and will provide it as the cursor argument if your task is interrupted or resumed. The cursor is stored as a String, so your custom enumerator should handle serializing/deserializing the value if required.

# app/tasks/maintenance/custom_enumerator_task.rb

module Maintenance
  class CustomEnumeratorTask < MaintenanceTasks::Task
    def enumerator_builder(cursor:)
      after_id = cursor&.to_i
      PostAPI.index(after_id: after_id).map { |post| [post, post.id] }.to_enum
    end

    def process(post)
      Post.create!(post)
    end
  end
end

Throttling

Maintenance tasks often modify a lot of data and can be taxing on your database. The gem provides a throttling mechanism that can be used to throttle a Task when a given condition is met. If a Task is throttled (the throttle block returns true), it will be interrupted and retried after a backoff period has passed. The default backoff is 30 seconds.

Specify the throttle condition as a block:

# app/tasks/maintenance/update_posts_throttled_task.rb

module Maintenance
  class UpdatePostsThrottledTask < MaintenanceTasks::Task
    throttle_on(backoff: 1.minute) do
      DatabaseStatus.unhealthy?
    end

    def collection
      Post.all
    end

    def process(post)
      post.update!(content: "New content added on #{Time.now.utc}")
    end
  end
end

Note that it’s up to you to define a throttling condition that makes sense for your app. Shopify implements DatabaseStatus.healthy? to check various MySQL metrics such as replication lag, DB threads, whether DB writes are available, etc.

Tasks can define multiple throttle conditions. Throttle conditions are inherited by descendants, and new conditions will be appended without impacting existing conditions.

The backoff can also be specified as a Proc that receives no arguments:

# app/tasks/maintenance/update_posts_throttled_task.rb

module Maintenance
  class UpdatePostsThrottledTask < MaintenanceTasks::Task
    throttle_on(backoff: -> { RandomBackoffGenerator.generate_duration } ) do
      DatabaseStatus.unhealthy?
    end
    # ...
  end
end

Custom Task Parameters

Tasks may need additional information, supplied via parameters, to run. Parameters can be defined as Active Model Attributes in a Task, and then become accessible to any of Task’s methods: #collection, #count, or #process.

# app/tasks/maintenance/update_posts_via_params_task.rb

module Maintenance
  class UpdatePostsViaParamsTask < MaintenanceTasks::Task
    attribute :updated_content, :string
    validates :updated_content, presence: true

    def collection
      Post.all
    end

    def process(post)
      post.update!(content: updated_content)
    end
  end
end

Tasks can leverage Active Model Validations when defining parameters. Arguments supplied to a Task accepting parameters will be validated before the Task starts to run. Since arguments are specified in the user interface via text area inputs, it’s important to check that they conform to the format your Task expects, and to sanitize any inputs if necessary.

Validating Task Parameters

Task attributes can be validated using Active Model Validations. Attributes are validated before a Task is enqueued.

If an attribute uses an inclusion validator with a supported in: option, the set of values will be used to populate a dropdown in the user interface. The following types are supported:

Arrays
Procs and lambdas that optionally accept the Task instance, and return an Array.
Callable objects that receive one argument, the Task instance, and return an Array.
Methods that return an Array, called on the Task instance.

For enumerables that don't match the supported types, a text field will be rendered instead.

Custom cursor columns to improve performance

The job-iteration gem, on which this gem depends, adds an order by clause to the relation returned by the collection method, in order to iterate through records. It defaults to order on the id column.

The job-iteration gem supports configuring which columns are used to order the cursor, as documented in build_active_record_enumerator_on_records.

The maintenance-tasks gem exposes the ability that job-iteration provides to control the cursor columns, through the cursor_columns method in the MaintenanceTasks::Task class. If the cursor_columns method returns nil, the query is ordered by the primary key. If cursor columns values change during an iteration, records may be skipped or yielded multiple times.

module Maintenance
  class UpdatePostsTask < MaintenanceTasks::Task
    def cursor_columns
      [:created_at, :id]
    end

    def collection
      Post.where(created_at: 2.days.ago...1.hour.ago)
    end

    def process(post)
      post.update!(content: "updated content")
    end
  end
end

Subscribing to instrumentation events

If you are interested in actioning a specific task event, please refer to the Using Task Callbacks section below. However, if you want to subscribe to all events, irrespective of the task, you can use the following Active Support notifications:

enqueued.maintenance_tasks    # This event is published when a task has been enqueued by the user.
succeeded.maintenance_tasks   # This event is published when a task has finished without any errors.
cancelled.maintenance_tasks   # This event is published when the user explicitly halts the execution of a task.
paused.maintenance_tasks      # This event is published when a task is paused by the user in the middle of its run.
errored.maintenance_tasks     # This event is published when the task's code produces an unhandled exception.

These notifications offer a way to monitor the lifecycle of maintenance tasks in your application.

Usage example:

ActiveSupport::Notifications.subscribe("succeeded.maintenance_tasks") do |*, payload|
  task_name = payload[:task_name]
  arguments = payload[:arguments]
  metadata = payload[:metadata]
  job_id = payload[:job_id]
  run_id = payload[:run_id]
  time_running = payload[:time_running]
  started_at = payload[:started_at]
  ended_at = payload[:ended_at]
rescue => e
  Rails.logger.error(e)
end

ActiveSupport::Notifications.subscribe("errored.maintenance_tasks") do |*, payload|
  task_name = payload[:task_name]
  error = payload[:error]
  error_message = error[:message]
  error_class = error[:class]
  error_backtrace = error[:backtrace]
rescue => e
  Rails.logger.error(e)
end

# or

class MaintenanceTasksInstrumenter < ActiveSupport::Subscriber
  attach_to :maintenance_tasks

  def enqueued(event)
    task_name = event.payload[:task_name]
    arguments = event.payload[:arguments]
    metadata = event.payload[:metadata]

    SlackNotifier.broadcast(SLACK_CHANNEL,
      "Job #{task_name} was started by #{metadata[:user_email]}} with arguments #{arguments.to_s.truncate(255)}")
  rescue => e
    Rails.logger.error(e)
  end
end

Using Task Callbacks

The Task provides callbacks that hook into its life cycle.

Available callbacks are:

after_start
after_pause
after_interrupt
after_cancel
after_complete
after_error

module Maintenance
  class UpdatePostsTask < MaintenanceTasks::Task
    after_start :notify

    def notify
      NotifyJob.perform_later(self.class.name)
    end

    # ...
  end
end

Note: The after_error callback is guaranteed to complete, so any exceptions raised in your callback code are ignored. If your after_error callback code can raise an exception, you’ll need to rescue it and handle it appropriately within the callback.

module Maintenance
  class UpdatePostsTask < MaintenanceTasks::Task
    after_error :dangerous_notify

    def dangerous_notify
      # This error is rescued and ignored in favour of the original error causing the error flow.
      raise NotDeliveredError
    end

    # ...
  end
end

If any of the other callbacks cause an exception, it will be handled by the error handler, and will cause the task to stop running.

Considerations when writing Tasks

Maintenance Tasks relies on the queue adapter configured for your application to run the job which is processing your Task. The guidelines for writing Task may depend on the queue adapter but in general, you should follow these rules:

Duration of Task#process: processing a single element of the collection should take less than 25 seconds, or the duration set as a timeout for Sidekiq or the queue adapter configured in your application. Short batches allow the Task to be safely interrupted and resumed.
Idempotency of Task#process: it should be safe to run process multiple times for the same element of the collection. Read more in this Sidekiq best practice. It’s important if the Task errors and you run it again, because the same element that caused the Task to give an error may well be processed again. It especially matters in the situation described above, when the iteration duration exceeds the timeout: if the job is re-enqueued, multiple elements may be processed again.

Task object life cycle and memoization

When the Task runs or resumes, the Runner enqueues a job, which processes the Task. That job will instantiate a Task object which will live for the duration of the job. The first time the job runs, it will call count. Every time a job runs, it will call collection on the Task object, and then process for each item in the collection, until the job stops. The job stops when either the collection is finished processing or after the maximum job runtime has expired.

This means memoization can be misleading within process, since the memoized values will be available for subsequent calls to process within the same job. Still, memoization can be used for throttling or reporting, and you can use Task callbacks to persist or log a report for example.

Writing tests for a Task

The task generator will also create a test file for your task in the folder test/tasks/maintenance/. At a minimum, it’s recommended that the #process method in your task be tested. You may also want to test the #collection and #count methods for your task if they are sufficiently complex.

Example:

# test/tasks/maintenance/update_posts_task_test.rb

require "test_helper"

module Maintenance
  class UpdatePostsTaskTest < ActiveSupport::TestCase
    test "#process performs a task iteration" do
      post = Post.new

      Maintenance::UpdatePostsTask.process(post)

      assert_equal "New content!", post.content
    end
  end
end

Writing tests for a CSV Task

You should write tests for your #process method in a CSV Task as well. It takes a CSV::Row as an argument. You can pass a row, or a hash with string keys to #process from your test.

# test/tasks/maintenance/import_posts_task_test.rb

require "test_helper"

module Maintenance
  class ImportPostsTaskTest < ActiveSupport::TestCase
    test "#process performs a task iteration" do
      assert_difference -> { Post.count } do
        Maintenance::UpdatePostsTask.process({
          "title" => "My Title",
          "content" => "Hello World!",
        })
      end

      post = Post.last
      assert_equal "My Title", post.title
      assert_equal "Hello World!", post.content
    end
  end
end

Writing tests for a Task with parameters

Tests for tasks with parameters need to instantiate the task class in order to assign attributes. Once the task instance is setup, you may test #process normally.

# test/tasks/maintenance/update_posts_via_params_task_test.rb

require "test_helper"

module Maintenance
  class UpdatePostsViaParamsTaskTest < ActiveSupport::TestCase
    setup do
      @task = UpdatePostsViaParamsTask.new
      @task.updated_content = "Testing"
    end

    test "#process performs a task iteration" do
      assert_difference -> { Post.first.content } do
        @task.process(Post.first)
      end
    end
  end
end

Writing tests for a Task that uses a custom enumerator

Tests for tasks that use custom enumerators need to instantiate the task class in order to call #enumerator_builder. Once the task instance is set up, validate that #enumerator_builder returns an enumerator yielding pairs of [item, cursor] as expected.

# test/tasks/maintenance/custom_enumerating_task.rb

require "test_helper"

module Maintenance
  class CustomEnumeratingTaskTest < ActiveSupport::TestCase
    setup do
      @task = CustomEnumeratingTask.new
    end

    test "#enumerator_builder returns enumerator yielding pairs of [item, cursor]" do
      enum = @task.enumerator_builder(cursor: 0)
      expected_items = [:b, :c]

      assert_equal 2, enum.size

      enum.each_with_index do |item, cursor|
        assert_equal expected_items[cursor], item
      end
    end

    test "#process performs a task iteration" do
      # ...
    end
  end
end

Running a Task

Running a Task from the Web UI

You can run your new Task by accessing the Web UI and clicking on "Run".

Running a Task from the command line

Alternatively, you can run your Task in the command line:

bundle exec maintenance_tasks perform Maintenance::UpdatePostsTask

To run a Task that processes CSVs from the command line, use the --csv option:

bundle exec maintenance_tasks perform Maintenance::ImportPostsTask --csv "path/to/my_csv.csv"

The --csv option also works with CSV content coming from the standard input:

curl "some/remote/csv" |
  bundle exec maintenance_tasks perform Maintenance::ImportPostsTask --csv

To run a Task that takes arguments from the command line, use the --arguments option, passing arguments as a set of <key>:<value> pairs:

bundle exec maintenance_tasks perform Maintenance::ParamsTask \
  --arguments post_ids:1,2,3 content:"Hello, World!"

Running a Task from Ruby

You can also run a Task in Ruby by sending run with a Task name to Runner:

MaintenanceTasks::Runner.run(name: "Maintenance::UpdatePostsTask")

To run a Task that processes CSVs using the Runner, provide a Hash containing an open IO object and a filename to run:

MaintenanceTasks::Runner.run(
  name: "Maintenance::ImportPostsTask",
  csv_file: { io: File.open("path/to/my_csv.csv"), filename: "my_csv.csv" }
)

To run a Task that takes arguments using the Runner, provide a Hash containing the set of arguments ({ parameter_name: argument_value }) to run:

MaintenanceTasks::Runner.run(
  name: "Maintenance::ParamsTask",
  arguments: { post_ids: "1,2,3" }
)

Monitoring your Task’s status

The web UI will provide updates on the status of your Task. Here are the states a Task can be in:

new: A Task that has not yet been run.
enqueued: A Task that is waiting to be performed after a user has instructed it to run.
running: A Task that is currently being performed by a job worker.
pausing: A Task that was paused by a user, but needs to finish work before stopping.
paused: A Task that was paused by a user and is not performing. It can be resumed.
interrupted: A Task that has been momentarily interrupted by the job infrastructure.
cancelling: A Task that was cancelled by a user, but needs to finish work before stopping.
cancelled: A Task that was cancelled by a user and is not performing. It cannot be resumed.
succeeded: A Task that finished successfully.
errored: A Task that encountered an unhandled exception while performing.

Using Maintenance Tasks in API-only applications

The Maintenance Tasks engine uses Rails sessions for flash messages and storing the CSRF token. For the engine to work in an API-only Rails application, you need to add a session middleware and the ActionDispatch::Flash middleware. The engine also defines a strict Content Security Policy, make sure to include ActionDispatch::ContentSecurityPolicy::Middleware in your app's middleware stack to ensure the CSP is delivered to the user's browser.

Configuring Rails applications is beyond the scope of this documentation, but one way to do this is to add these lines to your application configuration:

# config/application.rb
module YourApplication
  class Application < Rails::Application
    # ...
    config.api_only = true

    config.middleware.insert_before ::Rack::Head, ::ActionDispatch::Flash
    config.middleware.insert_before ::Rack::Head, ::ActionDispatch::ContentSecurityPolicy::Middleware
    config.session_store :cookie_store, key: "_#{railtie_name.chomp("_application")}_session", secure: true
    config.middleware.insert_before ::ActionDispatch::Flash, config.session_store, config.session_options
    config.middleware.insert_before config.session_store, ActionDispatch::Cookies
  end
end

You can read more in the Using Rails for API-only Applications Rails guide.

How Maintenance Tasks runs a Task

Maintenance tasks can be running for a long time, and the purpose of the gem is to make it easy to continue running tasks through deploys, Kubernetes Pod scheduling, Heroku dyno restarts or other infrastructure or code changes.

This means a Task can safely be interrupted, re-enqueued and resumed without any intervention at the end of an iteration, after the process method returns.

By default, a running Task will be interrupted after running for more 5 minutes. This is configured in the job-iteration gem and can be tweaked in an initializer if necessary.

Running tasks will also be interrupted and re-enqueued when needed. For example when Sidekiq workers shut down for a deploy:

When Sidekiq receives a TSTP or TERM signal, it will consider itself to be stopping.
When Sidekiq is stopping, JobIteration stops iterating over the enumerator. The position in the iteration is saved, a new job is enqueued to resume work, and the Task is marked as interrupted.

When Sidekiq is stopping, it will give workers 25 seconds to finish before forcefully terminating them (this is the default but can be configured with the --timeout option). Before the worker threads are terminated, Sidekiq will try to re-enqueue the job so your Task will be resumed. However, the position in the collection won’t be persisted so at least one iteration may run again.

Job queues other than Sidekiq may handle this in different ways.

Help! My Task is stuck

If the queue adapter configured for your application doesn’t have this property, or if Sidekiq crashes, is forcefully terminated, or is unable to re-enqueue the jobs that were in progress, the Task may be in a seemingly stuck situation where it appears to be running but is not. In that situation, pausing or cancelling it will not result in the Task being paused or cancelled, as the Task will get stuck in a state of pausing or cancelling. As a work-around, if a Task is cancelling for more than 5 minutes, you can cancel it again. It will then be marked as fully cancelled, allowing you to run it again.

If you are stuck in pausing and wish to preserve your tasks's position (instead of cancelling and rerunning), you may click "Force pause".

Configuring the gem

There are a few configurable options for the gem. Custom configurations should be placed in a maintenance_tasks.rb initializer.

Customizing the error handler

Exceptions raised while a Task is performing are rescued and information about the error is persisted and visible in the UI.

If you want to integrate with an exception monitoring service (e.g. Bugsnag), you can define an error handler:

# config/initializers/maintenance_tasks.rb

MaintenanceTasks.error_handler = ->(error, task_context, _errored_element) do
  Bugsnag.notify(error) do |notification|
    notification.add_metadata(:task, task_context)
  end
end

The error handler should be a lambda that accepts three arguments:

error: The exception that was raised.
task_context: A hash with additional information about the Task and the error:
- task_name: The name of the Task that errored
- started_at: The time the Task started
- ended_at: The time the Task errored
Note that task_context may be empty if the Task produced an error before any context could be gathered (for example, if deserializing the job to process your Task failed).
errored_element: The element, if any, that was being processed when the Task raised an exception. If you would like to pass this object to your exception monitoring service, make sure you sanitize the object to avoid leaking sensitive data and convert it to a format that is compatible with your bug tracker. For example, Bugsnag only sends the id and class name of Active Record objects in order to protect sensitive data. CSV rows, on the other hand, are converted to strings and passed raw to Bugsnag, so make sure to filter any personal data from these objects before adding them to a report.

Customizing the maintenance tasks module

MaintenanceTasks.tasks_module can be configured to define the module in which tasks will be placed.

# config/initializers/maintenance_tasks.rb

MaintenanceTasks.tasks_module = "TaskModule"

If no value is specified, it will default to Maintenance.

Organizing tasks using namespaces

Tasks may be nested arbitrarily deeply under app/tasks/maintenance, for example given a task file app/tasks/maintenance/team_name/service_name/update_posts_task.rb we can define the task as:

module Maintenance
  module TeamName
    module ServiceName
      class UpdatePostsTask < MaintenanceTasks::Task
        def process(rows)
          # ...
        end
      end
    end
  end
end

Customizing the underlying job class

MaintenanceTasks.job can be configured to define a Job class for your tasks to use. This is a global configuration, so this Job class will be used across all maintenance tasks in your application.

# config/initializers/maintenance_tasks.rb

MaintenanceTasks.job = "CustomTaskJob"

# app/jobs/custom_task_job.rb

class CustomTaskJob < MaintenanceTasks::TaskJob
  queue_as :low_priority
end

The Job class must inherit from MaintenanceTasks::TaskJob.

Note that retry_on is not supported for custom Job classes, so failed jobs cannot be retried.

Customizing the rate at which task progress gets updated

MaintenanceTasks.ticker_delay can be configured to customize how frequently task progress gets persisted to the database. It can be a Numeric value or an ActiveSupport::Duration value.

# config/initializers/maintenance_tasks.rb

MaintenanceTasks.ticker_delay = 2.seconds

If no value is specified, it will default to 1 second.

Customizing which Active Storage service to use

The Active Storage framework in Rails 6.1 and up supports multiple storage services. To specify which service to use, MaintenanceTasks.active_storage_service can be configured with the service’s key, as specified in your application’s config/storage.yml:

# config/storage.yml

user_data:
  service: GCS
  credentials: <%= Rails.root.join("path/to/user/data/keyfile.json") %>
  project: "my-project"
  bucket: "user-data-bucket"

internal:
  service: GCS
  credentials: <%= Rails.root.join("path/to/internal/keyfile.json") %>
  project: "my-project"
  bucket: "internal-bucket"

# config/initializers/maintenance_tasks.rb

MaintenanceTasks.active_storage_service = :internal

There is no need to configure this option if your application uses only one storage service. Rails.configuration.active_storage.service is used by default.

Customizing the backtrace cleaner

MaintenanceTasks.backtrace_cleaner can be configured to specify a backtrace cleaner to use when a Task errors and the backtrace is cleaned and persisted. An ActiveSupport::BacktraceCleaner should be used.

# config/initializers/maintenance_tasks.rb

cleaner = ActiveSupport::BacktraceCleaner.new
cleaner.add_silencer { |line| line =~ /ignore_this_dir/ }

MaintenanceTasks.backtrace_cleaner = cleaner

If none is specified, the default Rails.backtrace_cleaner will be used to clean backtraces.

Customizing the parent controller for the web UI

MaintenanceTasks.parent_controller can be configured to specify a controller class for all of the web UI engine's controllers to inherit from.

This allows applications with common logic in their ApplicationController (or any other controller) to optionally configure the web UI to inherit that logic with a simple assignment in the initializer.

# config/initializers/maintenance_tasks.rb

MaintenanceTasks.parent_controller = "Services::CustomController"

# app/controllers/services/custom_controller.rb

class Services::CustomController < ActionController::Base
  include CustomSecurityThings
  include CustomLoggingThings
  # ...
end

The parent controller value must be a string corresponding to an existing controller class which must inherit from ActionController::Base.

If no value is specified, it will default to "ActionController::Base".

Configure time after which the task will be considered stuck

To specify a time duration after which a task is considered stuck if it has not been updated, you can configure MaintenanceTasks.stuck_task_duration. This duration should account for job infrastructure events that may prevent the maintenance tasks job from being executed and cancelling the task.

The value for MaintenanceTasks.stuck_task_duration must be an ActiveSupport::Duration. If no value is specified, it will default to 5 minutes.

Metadata

MaintenanceTasks.metadata can be configured to specify a proc from which to get extra information about the run. Since this proc will be ran in the context of the MaintenanceTasks.parent_controller, it can be used to keep the id or email of the user who performed the maintenance task.

# config/initializers/maintenance_tasks.rb
MaintenanceTasks.metadata = ->() do
  { user_email: current_user.email }
end

Upgrading

Use bundler to check for and upgrade to newer versions. After installing a new version, re-run the install command:

bin/rails generate maintenance_tasks:install

This ensures that new migrations are installed and run as well.

What if I’ve deleted my previous Maintenance Task migrations?

The install command will attempt to reinstall these old migrations and migrating the database will cause problems. Use bin/rails maintenance_tasks:install:migrations to copy the gem’s migrations to your db/migrate folder. Check the release notes to see if any new migrations were added since your last gem upgrade. Ensure that these are kept, but remove any migrations that already ran.

Run the migrations using bin/rails db:migrate.

Contributing

Would you like to report an issue or contribute with code? We accept issues and pull requests. You can find the contribution guidelines on CONTRIBUTING.md.

Releasing new versions

Updates should be added to the latest draft release on GitHub as Pull Requests are merged.

Once a release is ready, follow these steps:

Update spec.version in maintenance_tasks.gemspec.
Run bundle install to bump the Gemfile.lock version of the gem.
Open a PR and merge on approval.
Deploy via Shipit and see the new version on https://rubygems.org/gems/maintenance_tasks.
Ensure the release has documented all changes and publish it.
Create a new draft release on GitHub with the title “Upcoming Release”. The tag version can be left blank. This will be the starting point for documenting changes related to the next release.

Files

README.md

Latest commit

History

README.md

File metadata and controls

Maintenance Tasks

Should I Use Maintenance Tasks?

Installation

Active Job Dependency

Action Controller & Action View Dependency

Autoloading

Usage

Creating a Task

Customizing the Batch Size

Creating a CSV Task

CSV options

Batch CSV Tasks

Processing Batch Collections

Tasks that don’t need a Collection

Tasks with Custom Enumerators

Throttling

Custom Task Parameters

Validating Task Parameters

Custom cursor columns to improve performance

Subscribing to instrumentation events

Using Task Callbacks

Considerations when writing Tasks

Task object life cycle and memoization

Writing tests for a Task

Writing tests for a CSV Task

Writing tests for a Task with parameters

Writing tests for a Task that uses a custom enumerator

Running a Task

Running a Task from the Web UI

Running a Task from the command line

Running a Task from Ruby

Monitoring your Task’s status

Using Maintenance Tasks in API-only applications

How Maintenance Tasks runs a Task

Help! My Task is stuck

Configuring the gem

Customizing the error handler

Customizing the maintenance tasks module

Organizing tasks using namespaces

Customizing the underlying job class

Customizing the rate at which task progress gets updated

Customizing which Active Storage service to use

Customizing the backtrace cleaner

Customizing the parent controller for the web UI

Configure time after which the task will be considered stuck

Metadata

Upgrading

What if I’ve deleted my previous Maintenance Task migrations?

Contributing

Releasing new versions