BoardConfig.mk

# Copyright (C) 2016 The CyanogenMod Project
# Copyright (C) 2017 The LineageOS Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

#
# This file sets variables that control the way modules are built
# thorughout the system. It should not be used to conditionally
# disable makefiles (the proper mechanism to control what gets
# included in a build is to use PRODUCT_PACKAGES in a product
# definition file).
#

# Inherit from oppo-common
-include device/oppo/common/BoardConfigCommon.mk

PLATFORM_PATH := device/oneplus/oneplus3

TARGET_SPECIFIC_HEADER_PATH := $(PLATFORM_PATH)/include

BOARD_VENDOR := oneplus

# Assertions
TARGET_BOARD_INFO_FILE ?= $(PLATFORM_PATH)/board-info.txt
TARGET_OTA_ASSERT_DEVICE := OnePlus3,oneplus3,OnePlus3T,oneplus3t

# Use Snapdragon LLVM, if available
TARGET_USE_SDCLANG := true

# Bootloader
TARGET_BOOTLOADER_BOARD_NAME := msm8996
TARGET_NO_BOOTLOADER := true

# Platform
TARGET_BOARD_PLATFORM := msm8996
TARGET_BOARD_PLATFORM_GPU := qcom-adreno530

# Architecture
TARGET_ARCH := arm64
TARGET_ARCH_VARIANT := armv8-a
TARGET_CPU_ABI := arm64-v8a
TARGET_CPU_ABI2 :=
TARGET_CPU_VARIANT := kryo

TARGET_2ND_ARCH := arm
TARGET_2ND_ARCH_VARIANT := armv7-a-neon
TARGET_2ND_CPU_ABI := armeabi-v7a
TARGET_2ND_CPU_ABI2 := armeabi
TARGET_2ND_CPU_VARIANT := kryo

TARGET_USES_64_BIT_BINDER := true

# Kernel
BOARD_KERNEL_CMDLINE := androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 cma=32M@0-0xffffffff
BOARD_KERNEL_CMDLINE += androidboot.selinux=permissive
BOARD_KERNEL_BASE := 0x80000000
BOARD_KERNEL_PAGESIZE := 4096
BOARD_KERNEL_TAGS_OFFSET := 0x02000000
BOARD_RAMDISK_OFFSET     := 0x02200000
BOARD_KERNEL_IMAGE_NAME := Image.gz-dtb
TARGET_KERNEL_ARCH := arm64
TARGET_KERNEL_HEADER_ARCH := arm64
TARGET_KERNEL_SOURCE := kernel/oneplus/msm8996
TARGET_KERNEL_CONFIG := caesium_defconfig
TARGET_KERNEL_CROSS_COMPILE_PREFIX := aarch64-linux-android-

# QCOM hardware
BOARD_USES_QCOM_HARDWARE := true

# ANT+
BOARD_ANT_WIRELESS_DEVICE := "qualcomm-uart"

# Audio
#AUDIO_FEATURE_ENABLED_AAC_ADTS_OFFLOAD := true
AUDIO_FEATURE_ENABLED_ACDB_LICENSE := true
#AUDIO_FEATURE_ENABLED_APE_OFFLOAD := true
AUDIO_FEATURE_ENABLED_ALAC_OFFLOAD := true
AUDIO_FEATURE_ENABLED_ANC_HEADSET := true
AUDIO_FEATURE_ENABLED_AUDIOSPHERE := true
AUDIO_FEATURE_ENABLED_COMPRESS_VOIP := true
AUDIO_FEATURE_ENABLED_DEV_ARBI := true
#AUDIO_FEATURE_ENABLED_DYNAMIC_LOG := true
AUDIO_FEATURE_ENABLED_EXTN_FORMATS := true
AUDIO_FEATURE_ENABLED_FLAC_OFFLOAD := true
AUDIO_FEATURE_ENABLED_FLUENCE := true
AUDIO_FEATURE_ENABLED_HFP := true
AUDIO_FEATURE_ENABLED_KPI_OPTIMIZE := true
AUDIO_FEATURE_ENABLED_MULTI_VOICE_SESSIONS := true
AUDIO_FEATURE_ENABLED_NT_PAUSE_TIMEOUT := true
AUDIO_FEATURE_ENABLED_PCM_OFFLOAD := true
AUDIO_FEATURE_ENABLED_PCM_OFFLOAD_24 := true
AUDIO_FEATURE_ENABLED_PROXY_DEVICE := true
#AUDIO_FEATURE_ENABLED_VORBIS_OFFLOAD := true
#AUDIO_FEATURE_ENABLED_WMA_OFFLOAD := true
AUDIO_USE_LL_AS_PRIMARY_OUTPUT := true
BOARD_SUPPORTS_SOUND_TRIGGER := true
BOARD_USES_ALSA_AUDIO := true
USE_CUSTOM_AUDIO_POLICY := 1
USE_XML_AUDIO_POLICY_CONF := 1

# Bluetooth
BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR := $(PLATFORM_PATH)/bluetooth
BOARD_HAS_QCA_BT_ROME := true
BOARD_HAVE_BLUETOOTH := true
BOARD_HAVE_BLUETOOTH_QCOM := true
QCOM_BT_USE_BTNV := true
QCOM_BT_USE_SMD_TTY := true

# Camera
BOARD_QTI_CAMERA_32BIT_ONLY := true
USE_DEVICE_SPECIFIC_CAMERA := true

# Charger
BOARD_CHARGER_ENABLE_SUSPEND := true
BOARD_CHARGER_DISABLE_INIT_BLANK := true
WITH_LINEAGE_CHARGER := false

# CNE and DPM
BOARD_USES_QCNE := true

# Crypto
TARGET_HW_DISK_ENCRYPTION := true

# Display
BOARD_USES_ADRENO := true
TARGET_CONTINUOUS_SPLASH_ENABLED := true
TARGET_USES_C2D_COMPOSITION := true
TARGET_USES_ION := true
TARGET_USES_OVERLAY := true
USE_OPENGL_RENDERER := true
MAX_EGL_CACHE_KEY_SIZE := 12*1024
MAX_EGL_CACHE_SIZE := 2048*1024
OVERRIDE_RS_DRIVER:= libRSDriver_adreno.so
MAX_VIRTUAL_DISPLAY_DIMENSION := 4096
TARGET_FORCE_HWC_FOR_VIRTUAL_DISPLAYS := true
VSYNC_EVENT_PHASE_OFFSET_NS := 2000000
SF_VSYNC_EVENT_PHASE_OFFSET_NS := 6000000
TARGET_USES_HWC2 := true
TARGET_USES_GRALLOC1 := true
TARGET_USES_QCOM_DISPLAY_BSP := true

# Enable dexpreopt to speed boot time
ifeq ($(HOST_OS),linux)
  ifneq ($(TARGET_BUILD_VARIANT),eng)
    ifeq ($(WITH_DEXPREOPT),)
      WITH_DEXPREOPT := true
      WITH_DEXPREOPT_BOOT_IMG_AND_SYSTEM_SERVER_ONLY := true
    endif
  endif
endif

# Filesystem
TARGET_FS_CONFIG_GEN := $(PLATFORM_PATH)/config.fs

# GPS
USE_DEVICE_SPECIFIC_GPS := true
BOARD_VENDOR_QCOM_GPS_LOC_API_HARDWARE := default

# Init
TARGET_INIT_VENDOR_LIB := libinit_oneplus3
TARGET_RECOVERY_DEVICE_MODULES := libinit_oneplus3
TARGET_PLATFORM_DEVICE_BASE := /devices/soc/

# Keystore
TARGET_PROVIDES_KEYMASTER := true

# Lights
TARGET_PROVIDES_LIBLIGHT := true

# Lineage Hardware
BOARD_HARDWARE_CLASS += $(PLATFORM_PATH)/lineagehw

# Mainfest
DEVICE_MANIFEST_FILE := $(PLATFORM_PATH)/configs/manifest.xml
DEVICE_MATRIX_FILE   := $(PLATFORM_PATH)/configs/compatibility_matrix.xml

# Media
BOARD_SECCOMP_POLICY := $(PLATFORM_PATH)/seccomp
TARGET_USES_MEDIA_EXTENSIONS := true

# NFC
BOARD_NFC_CHIPSET := pn548
BOARD_NFC_HAL_SUFFIX := $(TARGET_BOARD_PLATFORM)

# Partitions
BOARD_BOOTIMAGE_PARTITION_SIZE := 67108864
BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE := f2fs
BOARD_CACHEIMAGE_PARTITION_SIZE := 268435456
BOARD_RECOVERYIMAGE_PARTITION_SIZE := 67108864
BOARD_SYSTEMIMAGE_PARTITION_SIZE := 3154116608
BOARD_USERDATAIMAGE_PARTITION_SIZE := 57436708864
BOARD_FLASH_BLOCK_SIZE := 262144

# Power
TARGET_HAS_NO_WIFI_STATS := true
TARGET_TAP_TO_WAKE_NODE := "/proc/touchpanel/double_tap_enable"

# RIL
TARGET_RIL_VARIANT := caf

# Recovery
TARGET_RECOVERY_FSTAB := $(PLATFORM_PATH)/recovery/recovery.fstab
BOARD_HAS_LARGE_FILESYSTEM := true
TARGET_USERIMAGES_USE_EXT4 := true
TARGET_USERIMAGES_USE_F2FS := true

# Releasetools
TARGET_RECOVERY_UPDATER_LIBS := librecovery_updater_op3
TARGET_RELEASETOOLS_EXTENSIONS := $(PLATFORM_PATH)

# SELinux
include device/qcom/sepolicy/sepolicy.mk

#BOARD_SEPOLICY_DIRS += $(PLATFORM_PATH)/sepolicy

# Treble
#PRODUCT_FULL_TREBLE_OVERRIDE := true
PRODUCT_VENDOR_MOVE_ENABLED := true

# Wifi
BOARD_HAS_QCOM_WLAN := true
BOARD_HAS_QCOM_WLAN_SDK := true
BOARD_WLAN_DEVICE := qcwcn
BOARD_HOSTAPD_DRIVER := NL80211
BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_$(BOARD_WLAN_DEVICE)
BOARD_WPA_SUPPLICANT_DRIVER := NL80211
BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_$(BOARD_WLAN_DEVICE)
WIFI_DRIVER_FW_PATH_AP := "ap"
WIFI_DRIVER_FW_PATH_STA := "sta"
WIFI_DRIVER_FW_PATH_P2P := "p2p"
WPA_SUPPLICANT_VERSION := VER_0_8_X

# inherit from the proprietary version
-include vendor/oneplus/oneplus3/BoardConfigVendor.mk