Dissasambly, Teardown and Repair. A look inside at least, maybe this is of help.
The Top-cove with the Ubiquiti logo hides a screw beneeth it that holds the AP assambly inside the plastic enclosure.
This screw has to be removed before the AP can be slid out of its enclosure.
With the Screw in the middle in place, and the top screw removed, the latches on either side of the cutout for the LAN-cable, hold the assambly locked into the enclosure.
If they hurt your fingers tweezing, you are doing something wrong. Sliding it out is pretty easy.
Removal will damagae the AP when sliding it out of the enclosure.
My shoddy solder-job is usually replaced with a nice latched connector that can now be un-latched for removal.
Mine came half disassambled already and with a ripped connector.
