Venus-Blue: Turtlebot Control with Footpedals with Localisation Display

Project Brief:

This project involves using the Raspberry Pi platform. A small rover chassis should be controlled, to drive a circuit in a 2m X 2m space. The speed and direction of the rover should be controlled by the Foot Pedal. The Foot Pedal should be connected via USB OTG to the nucleo board, which should then broadcast the commands via ROS. The rover should also be tracked with a motion model and the onboard LiDar, with the display on either using a web dashboard.

Project System Overview

The overview block diagram of the system is shown here. There are four main nodes:

• Nucleo Board Node: which processes data from the peripherals (foot pedals) and transmits to as raspberry Pi using serial. This process is handled in zephyr
• Raspberry Pi Node: which receives data from the Nucleo board and publishes the data to a specified MQTT topic in JSON format
• PC Dashboard Node: Receives the localisation information and peripheral information via MQTT and displays it on a web interface
• Turtlebot Node: the robot to be controlled. It receives driving information via MQTT and publishes to a ROS network. Then, publishes the localised position of the turtlebot to MQTT.

The block diagram below uses dashed lines to represent wireless network connection and solid lines for wired connections.

flowchart LR
    A[Footpedal] -->|OTG wired| B[Nucleo Board]
    B --> |UART| C[Raspberry Pi]:::blue
    C -.-> |MQTT| D[PC Dashboard]:::blue
    C -.-> |MQTT| EA
    EB -.-> |MQTT| D
    EC -.-> |MQTT| D

subgraph E[Turtlebot]
    EA[Raspberry Pi] ---|ROS| EB[Localisation Node]
    EA ---|ROS| EC[Telemetry Node]
end

%% Defining the styles
    classDef Input fill:#017d22;
    classDef Node fill:#03368a;

%% Assigning styles to nodes
    class A Input;
    class B,C,D,EB,EC Node;

Loading

User Guide

Hardware

Components required:

• Footpedal
• Nucleo board.
• USB A to micro cables.

Setup:

• Using a USB A to micro cable, plug the foot pedal into the Nucleo board.
• Using a second cable, plug the Nucleo board into the host machine.

Turtlebot Controller

Clone the repository:

git clone https://github.com/RachelChiong/Venus-Blue.git

Start the serial comms MQTT node:

cd pedal && python3 pi_serial.py

Initialise the ROS environment to point to the TurtleBot (This is for a waffle_pi with domain id 32, change these values for another turtlebot model or domain id):

export ROS_DOMAIN_ID=32
export TURTLEBOT3_MODEL=waffle_pi
export RMW_IMPLEMENTATION=rwm_cyclonedds_cpp
source /opt/ros/humble/setup.bash

Build and run the controller. The MQTT server can be selected by passing mqtt_server, mqtt_port arguments to ros2 run.

source /opt/ros/humble/setup.bash
cd turtlebot
colcon build --sylink-install --packages-select venusbluepy
source /install/setup.bash
ros2 launch venusblue venusblue.launch

Visualisation Dashboard

Pre-requisites:

• Docker
• Docker-compose
• UQ internet connection (to interact with MQTT nodes)

Tech-stack:

• React-Typescript (frontend)
• Flask-Python (backend)

Steps:

1. Ensure docker is running
2. Go to dashboard/ and run

docker-compose up

This should spin up two sub-containers.

• frontend: localhost:3000
• backend: localhost:5001

3. To close the dashboard, run

docker-compose down -v