RWTH-EBC · larissakuehn · Jul 18, 2023 · Nov 29, 2022 · Nov 29, 2022 · Nov 29, 2022
diff --git a/AixLib/.copiedFiles.txt b/AixLib/.copiedFiles.txt
diff --git a/AixLib/DataBase/Pools/IndoorSwimmingPoolBaseRecord.mo b/AixLib/DataBase/Pools/IndoorSwimmingPoolBaseRecord.mo
@@ -0,0 +1,77 @@
+within AixLib.DataBase.Pools;
+record IndoorSwimmingPoolBaseRecord
+  extends Modelica.Icons.Record;
+
+  parameter Modelica.Units.SI.Temperature TPool
+    "Set water temperature of swimming pool";
+  parameter Modelica.Units.SI.Volume VPool "Volume of pool water";
+  parameter Modelica.Units.SI.Area APool(min=0)
+    "Area of water surface of swimming pool";
+  parameter Modelica.Units.SI.Length depthPool(min=0)
+    "Average depth of swimming pool";
+  parameter Modelica.Units.SI.Volume VStorage
+    "Usable Volume of water storage, DIN 19643-1";
+
+  // parameter for pool water circulation
+  parameter Modelica.Units.SI.VolumeFlowRate V_flow_nominal(min=0.001)
+    "Circulation volume flow rate";
+  parameter Modelica.Units.SI.VolumeFlowRate V_flow_partial(min=0)
+    "In the case of partial load: circulation volume flow rate during non-opening hours, DIN 19643-1";
+  parameter Boolean use_partialLoad=false  "Partial load operation implemented for non opening hours?";
+  parameter Modelica.Units.SI.PressureDifference dpHeaExcPool
+    "Pressure drop of heat exchanger, should be zero for an indeal heated pool";
+  parameter Boolean use_idealHeater=true "Include an ideal heat exchanger into the circulation system";
+  parameter Real KHeat "Gain of controller for ideal heater";
+  parameter Modelica.Units.SI.Time THeat "Time constant of Integrator block for ideal heater";
+  parameter Real QMaxHeat "Upper limit of output for ideal heater";
+  parameter Real QMinHeat "Lower limit of output for ideal heater";
+
+  // parameter for evaporation
+  parameter Real betaInUse(unit="m/s") "Water transfer coefficient during opening hours if pool is used, VDI 2089";
+  parameter Boolean use_poolCover=false "Pool covered during non opening hours";
+
+  // parameter for fresh water
+  parameter Boolean use_waterRecycling= false "Recycled water used for refilling pool water?";
+  parameter Real x_recycling(min=0) "Percentage of refilling water provided by recycled  pool water, DIN 19643-1: <= 0,8";
+  parameter Modelica.Units.SI.MassFlowRate m_flow_out(min=0.0001)
+    "Waterexchange due to people in the pool, DIN 19643-1";
+  parameter Boolean use_HRS=false "Is a heat recovery system physically integrated?";
+  parameter Modelica.Units.SI.Efficiency etaHRS
+    "Effieciency of heat recovery system";
+
+ // Wave mode
+  parameter Boolean use_wavePool=false "Is there a wave machine installed?";
+  parameter Modelica.Units.SI.Length heightWave "Height of generated wave";
+  parameter Modelica.Units.SI.Length widthWave
+    "Width of generated wave/ width of wave machineoutlet";
+  parameter Modelica.Units.SI.Time timeWavePul_start
+    "Start time of first wave cycle";
+  parameter Modelica.Units.SI.Time periodeWavePul "Time of cycling period";
+  parameter Real widthWavePul "Fraction of time of wave generation within cycling period";
+
+ // Pool Walls
+  parameter Modelica.Units.SI.Area AWalInt "Area of pool walls which is connected to inner rooms (inner pool walls)";
+  parameter Modelica.Units.SI.Area AWalExt "Area of pool walls which is connected to the ground (pool wall with earth contact)";
+  parameter Modelica.Units.SI.Area AFloInt "Area of pool floors which is connected to inner rooms (inner pool floor)";
+  parameter Modelica.Units.SI.Area AFloExt "Area of pool floors which is connected to teh ground (pool floor with earth contact)";
+  parameter Modelica.Units.SI.CoefficientOfHeatTransfer hConWaterHorizontal "Mean value for the heat transfer coefficient of free convection on horizontal pool floors";
+  parameter Modelica.Units.SI.CoefficientOfHeatTransfer hConWaterVertical "Mean value for the heat transfer coefficient of free convection on vertical pool walls";
+  //replaceable parameter AixLib.DataBase.Walls.WallBaseDataDefinition PoolWallParam;
+  parameter AixLib.DataBase.Walls.WallBaseDataDefinition PoolWallParam
+    annotation (choicesAllMatching=true);
+
+  annotation (Documentation(info="<html>
+
+  This is the base definition of indoor swimming pool records used in <a href=
+  \"AixLib.Fluid.Pools.IndoorSwimmingPool\">AixLib.Fluid.Pools.IndoorSwimmingPool</a>.
+  It aggregates all parameters at one record to enhance usability,
+  exchanging entire datasets and automatic generation of these
+  datasets.
+<h4>References </h4>
+<ul>
+<li>German Association of Engineers: Guideline VDI 2089-1, January 2010: Building Services in swimming baths - Indoor Pools</li>
+<li>German Institute for Standardization DIN 19643-1, November 2012: Treatment of water of swimming pools and baths - Part 1 General Requirements</li>
+<li>Chroistoph Saunus, 2005: Schwimmb&auml;der Planung - Ausf&uuml;hrung - Betrieb</li>
+</ul>
+</html>"));
+end IndoorSwimmingPoolBaseRecord;
diff --git a/AixLib/DataBase/Pools/IndoorSwimmingPoolDummy.mo b/AixLib/DataBase/Pools/IndoorSwimmingPoolDummy.mo
@@ -0,0 +1,42 @@
+within AixLib.DataBase.Pools;
+record IndoorSwimmingPoolDummy
+  "This is a dummy record with non-physical parameter values."
+  extends IndoorSwimmingPoolBaseRecord(
+    TPool=Modelica.Constants.eps,
+    VPool=Modelica.Constants.inf,
+    APool=Modelica.Constants.inf,
+    depthPool=Modelica.Constants.inf,
+    VStorage=Modelica.Constants.inf,
+    V_flow_nominal=Modelica.Constants.inf,
+    V_flow_partial=Modelica.Constants.inf,
+    use_partialLoad=false,
+    dpHeaExcPool=Modelica.Constants.inf,
+    use_idealHeater=true,
+    KHeat=Modelica.Constants.inf,
+    THeat=Modelica.Constants.inf,
+    QMaxHeat=Modelica.Constants.inf,
+    QMinHeat=Modelica.Constants.inf,
+    betaInUse=Modelica.Constants.inf,
+    use_poolCover=false,
+    use_waterRecycling=false,
+    x_recycling=Modelica.Constants.inf,
+    m_flow_out=Modelica.Constants.inf,
+    use_HRS=false,
+    etaHRS=Modelica.Constants.eps,
+    use_wavePool=false,
+    heightWave=Modelica.Constants.inf,
+    widthWave=Modelica.Constants.inf,
+    periodeWavePul=Modelica.Constants.eps,
+    timeWavePul_start=Modelica.Constants.eps,
+    widthWavePul=Modelica.Constants.eps,
+    AWalInt=Modelica.Constants.inf,
+    AWalExt=Modelica.Constants.inf,
+    AFloExt=Modelica.Constants.inf,
+    AFloInt=Modelica.Constants.inf,
+    hConWaterHorizontal=Modelica.Constants.inf,
+    hConWaterVertical=Modelica.Constants.inf,
+    PoolWallParam=AixLib.DataBase.Pools.SwimmingPoolWalls.WallDummy());
+  annotation (Documentation(info="<html>
+<p>This record is a place holder for zones without swimming pools to avoid error messages.</p>
+</html>"));
+end IndoorSwimmingPoolDummy;
diff --git a/AixLib/DataBase/Pools/SwimmingPoolWalls/ConcreteInsulationConstruction.mo b/AixLib/DataBase/Pools/SwimmingPoolWalls/ConcreteInsulationConstruction.mo
@@ -0,0 +1,13 @@
+within AixLib.DataBase.Pools.SwimmingPoolWalls;
+record ConcreteInsulationConstruction
+  "Concrete pool construction with insulation"
+  extends AixLib.DataBase.Walls.WallBaseDataDefinition(
+    n(min=1) = 3 "Number of wall layers",
+    d={0.05,0.2,0.1} "Thickness of wall layers",
+    rho={1940,2330,30} "Density of wall layers",
+    lambda={1.4,2.1,0.035} "Thermal conductivity of wall layers",
+    c={0.0001,0.001,0.00138} "Specific heat capacity of wall layers",
+    eps=0.9 "Emissivity of inner wall surface");
+  annotation (Icon(coordinateSystem(preserveAspectRatio=false)), Diagram(
+        coordinateSystem(preserveAspectRatio=false)));
+end ConcreteInsulationConstruction;
diff --git a/AixLib/DataBase/Pools/SwimmingPoolWalls/StainlessSteelConstruction.mo b/AixLib/DataBase/Pools/SwimmingPoolWalls/StainlessSteelConstruction.mo
@@ -0,0 +1,12 @@
+within AixLib.DataBase.Pools.SwimmingPoolWalls;
+record StainlessSteelConstruction
+  extends AixLib.DataBase.Walls.WallBaseDataDefinition(
+    n(min=1) = 1 "Number of wall layers",
+    d={0.05} "Thickness of wall layers",
+    rho={7900} "Density of wall layers",
+    lambda={15} "Thermal conductivity of wall layers",
+    c={500} "Specific heat capacity of wall layers",
+    eps=0.9 "Emissivity of inner wall surface");
+  annotation (Icon(coordinateSystem(preserveAspectRatio=false)), Diagram(
+        coordinateSystem(preserveAspectRatio=false)));
+end StainlessSteelConstruction;
diff --git a/AixLib/DataBase/Pools/SwimmingPoolWalls/WallDummy.mo b/AixLib/DataBase/Pools/SwimmingPoolWalls/WallDummy.mo
@@ -0,0 +1,12 @@
+within AixLib.DataBase.Pools.SwimmingPoolWalls;
+record WallDummy
+  extends AixLib.DataBase.Walls.WallBaseDataDefinition(
+    n(min=1) = 1 "Number of wall layers",
+    d={1} "Thickness of wall layers",
+    rho={1} "Density of wall layers",
+    lambda={1} "Thermal conductivity of wall layers",
+    c={1} "Specific heat capacity of wall layers",
+    eps=1 "Emissivity of inner wall surface");
+  annotation (Icon(coordinateSystem(preserveAspectRatio=false)), Diagram(
+        coordinateSystem(preserveAspectRatio=false)));
+end WallDummy;
diff --git a/AixLib/DataBase/Pools/SwimmingPoolWalls/package.mo b/AixLib/DataBase/Pools/SwimmingPoolWalls/package.mo
@@ -0,0 +1,3 @@
+within AixLib.DataBase.Pools;
+package SwimmingPoolWalls
+end SwimmingPoolWalls;
diff --git a/AixLib/DataBase/Pools/SwimmingPoolWalls/package.order b/AixLib/DataBase/Pools/SwimmingPoolWalls/package.order
@@ -0,0 +1,3 @@
+WallDummy
+ConcreteInsulationConstruction
+StainlessSteelConstruction
diff --git a/AixLib/DataBase/Pools/TypesOfIndoorSwimmingPools/ChildrensPool.mo b/AixLib/DataBase/Pools/TypesOfIndoorSwimmingPools/ChildrensPool.mo
@@ -0,0 +1,42 @@
+within AixLib.DataBase.Pools.TypesOfIndoorSwimmingPools;
+record ChildrensPool "Pool which is mainly used by children"
+  extends IndoorSwimmingPoolBaseRecord(
+    TPool=303.15,
+    VPool=126.8,
+    APool=125.0,
+    depthPool=0.9303008070432868,
+    VStorage=69.333925940005700,
+    V_flow_nominal=0.028045267489711933,
+    V_flow_partial=0.0125,
+    use_partialLoad=true,
+    dpHeaExcPool=0,
+    use_idealHeater=true,
+    KHeat=1000,
+    THeat=1,
+    QMaxHeat=1000000,
+    QMinHeat=0,
+    betaInUse=0.011111111111111112,
+    use_poolCover=false,
+    use_waterRecycling=false,
+    x_recycling=0.0,
+    m_flow_out=0.055645372003397,
+    use_HRS=true,
+    etaHRS=0.8,
+    use_wavePool=false,
+    heightWave=0,
+    widthWave=0,
+    periodeWavePul=1800,
+    timeWavePul_start=0,
+    widthWavePul=0,
+    AWalInt=0.001,
+    AWalExt=156.5,
+    AFloInt=0.001,
+    AFloExt=156.5,
+    hConWaterHorizontal=50.0,
+    hConWaterVertical=5200.0,
+    PoolWallParam=
+        AixLib.DataBase.Pools.SwimmingPoolWalls.ConcreteInsulationConstruction());
+annotation (Documentation(info="<html>
+<p>The swimming pool &quot;ChildrensPool&quot; describes a typical indoor swimming pool, which is mainly used by children and to teach children swimming. </p>
+</html>"));
+end ChildrensPool;
diff --git a/AixLib/DataBase/Pools/TypesOfIndoorSwimmingPools/SportPool.mo b/AixLib/DataBase/Pools/TypesOfIndoorSwimmingPools/SportPool.mo
@@ -0,0 +1,42 @@
+within AixLib.DataBase.Pools.TypesOfIndoorSwimmingPools;
+record SportPool "Pool which is mainly used by sport swimmers"
+  extends IndoorSwimmingPoolBaseRecord(
+    TPool=301.15,
+    VPool=942.956,
+    APool=416.5,
+    depthPool=2.2640000000000002,
+    VStorage=69.333925940005700,
+    V_flow_nominal=0.0856995884773662,
+    V_flow_partial=0.023144444444444443,
+    use_partialLoad=true,
+    dpHeaExcPool=0,
+    use_idealHeater=true,
+    KHeat=1000,
+    THeat=1,
+    QMaxHeat=1000000,
+    QMinHeat=0,
+    betaInUse=0.011111111111111112,
+    use_poolCover=false,
+    use_waterRecycling=false,
+    x_recycling=0.0,
+    m_flow_out=0.170038866026520,
+    use_HRS=true,
+    etaHRS=0.8,
+    use_wavePool=false,
+    heightWave=0,
+    widthWave=0,
+    periodeWavePul=1800,
+    timeWavePul_start=0,
+    widthWavePul=10/30*100,
+    AWalInt=21.658,
+    AWalExt=143.32,
+    AFloInt=0.001,
+    AFloExt=559.82,
+    hConWaterHorizontal=50.0,
+    hConWaterVertical=5200.0,
+    PoolWallParam=
+        AixLib.DataBase.Pools.SwimmingPoolWalls.ConcreteInsulationConstruction());
+  annotation (Documentation(info="<html>
+<p>The swimming pool &quot;SportPool&quot; describes a typical indoor swimming pool, which is mainly used for sport swimming. </p>
+</html>"));
+end SportPool;
diff --git a/AixLib/DataBase/Pools/TypesOfIndoorSwimmingPools/package.mo b/AixLib/DataBase/Pools/TypesOfIndoorSwimmingPools/package.mo
@@ -0,0 +1,3 @@
+within AixLib.DataBase.Pools;
+package TypesOfIndoorSwimmingPools
+end TypesOfIndoorSwimmingPools;
diff --git a/AixLib/DataBase/Pools/TypesOfIndoorSwimmingPools/package.order b/AixLib/DataBase/Pools/TypesOfIndoorSwimmingPools/package.order
@@ -0,0 +1,2 @@
+SportPool
+ChildrensPool
diff --git a/AixLib/DataBase/Pools/package.mo b/AixLib/DataBase/Pools/package.mo
@@ -0,0 +1,3 @@
+within AixLib.DataBase;
+package Pools
+end Pools;
diff --git a/AixLib/DataBase/Pools/package.order b/AixLib/DataBase/Pools/package.order
@@ -0,0 +1,4 @@
+IndoorSwimmingPoolBaseRecord
+IndoorSwimmingPoolDummy
+TypesOfIndoorSwimmingPools
+SwimmingPoolWalls
diff --git a/AixLib/DataBase/package.order b/AixLib/DataBase/package.order
@@ -5,6 +5,7 @@ Chiller
 HeatPump
 Media
 Pipes
+Pools
 Profiles
 Pumps
 Radiators