Constant.py

# 可修改的参数
# Reduce displayed waveforms to avoid display freezes
CSI_VAID_SUBCARRIER_INTERVAL = 1 # interval越大，有效载波数越少

# 默认参数
# Remove invalid subcarriers
# secondary channel : below, HT, 40 MHz, non STBC, v, HT-LFT: 0~63, -64~-1, 384
csi_vaid_subcarrier_index = []
csi_vaid_subcarrier_color = []
color_step = 255 // (28 // CSI_VAID_SUBCARRIER_INTERVAL + 1)

# LLTF: 52
csi_vaid_subcarrier_index += [i for i in range(6, 32, CSI_VAID_SUBCARRIER_INTERVAL)]     # 26  red
csi_vaid_subcarrier_color += [(i * color_step, 0, 0) for i in range(1,  26 // CSI_VAID_SUBCARRIER_INTERVAL + 2)]
csi_vaid_subcarrier_index += [i for i in range(33, 59, CSI_VAID_SUBCARRIER_INTERVAL)]    # 26  green
csi_vaid_subcarrier_color += [(0, i * color_step, 0) for i in range(1,  26 // CSI_VAID_SUBCARRIER_INTERVAL + 2)]
CSI_DATA_LLFT_COLUMNS = len(csi_vaid_subcarrier_index)
# HT-LFT: 56 + 56
csi_vaid_subcarrier_index += [i for i in range(66, 94, CSI_VAID_SUBCARRIER_INTERVAL)]    # 28  blue
csi_vaid_subcarrier_color += [(0, 0, i * color_step) for i in range(1,  28 // CSI_VAID_SUBCARRIER_INTERVAL + 2)]
csi_vaid_subcarrier_index += [i for i in range(95, 123, CSI_VAID_SUBCARRIER_INTERVAL)]   # 28  White
csi_vaid_subcarrier_color += [(i * color_step, i * color_step, i * color_step) for i in range(1,  28 // CSI_VAID_SUBCARRIER_INTERVAL + 2)]
# csi_vaid_subcarrier_index += [i for i in range(124, 162)]  # 28  White
# csi_vaid_subcarrier_index += [i for i in range(163, 191)]  # 28  White

CSI_DATA_COLUMNS = len(csi_vaid_subcarrier_index)

DATA_COLUMNS_NAMES = ["type", "id", "mac", "rssi", "rate", "sig_mode", "mcs", "bandwidth", "smoothing", "not_sounding", "aggregation", "stbc", "fec_coding",
                      "sgi", "noise_floor", "ampdu_cnt", "channel", "secondary_channel", "local_timestamp", "ant", "sig_len", "rx_state", "len", "first_word", "data"]