AltSnap.ini

; Disable and enable AltSnap to refresh configuration.
; Created for AltSnap v1.57

[General]
AutoFocus=0
; Automatically raises and focuses the windows you drag.

Aero=1
; Mimics Windows 7+ Aero Snap behavior.
; Drag windows to the left, right, top, or bottom side of the monitor.
; Corners work too! Hold Ctrl to trap the mouse cursor within the current
; monitor for easier snapping when using multiple monitors.

SmartAero=3
; If set to 1 (default), AltSnap will adjust the dimensions of
; a snapped window to other resized snapped windows.
; If set to 0, disabled, restores the old AltDrag behavior.
; If 2 is added, AltSnap will be smarter and snap to more windows.
; If 4 is added, AltSnapped windows will never be restored.

StickyResize=1
; If set to 1 or 3, other windows that are snapped to the current one
; can be resized by holding the Shift key.
; If set to 2, The above is done without the Shift key (Shift will disable it instead).
; If set to 0, sticky resizing is disabled.

MMMaximize=2
; Set the way MouseMove can maximize default is 1.
; If set to 1, to use resize/move combo (default).
; If set to 2, restores a window on a single left click instead of a drag.
; If set to 3, does both of the above (like the original AltDrag).
; If set to 0, disabled, does none of the above.

AeroHoffset=50
AeroVoffset=50
; Horizontal and vertical position (from top left in percent) where the aero
; windows will meet default is 50 50, at the center of the monitor.
; If you set AeroHoffset=33, for example, the windows snapped
; on the left will use only 33% of the monitor width, those on the right will
; have the remaining 67%. I strongly advise you to play around with this if
; you use Aero snapping...

InactiveScroll=0
; Adds the ability to scroll inactive windows. Hold shift to scroll horizontally.
; DO NOT USE under Windows 10/11, it is reserved for Win 8 and previous.

AutoSnap=2
; Makes a window automatically snap to other windows, without the need to press shift.
; List of settings:
; 0: Disabled.
; 1: Automatically snaps to the screen borders and the taskbar.
; 2: Also automatically snaps to the outside of windows.
; 3: Also automatically snaps to the inside of windows.

MDI=1
; Enables support for MDI windows (Multiple Document Interface), e.g. mIRC.
; A blacklist can be set to prevent this behavior on some windows (see below)

ResizeCenter=1
; 0: Bottom right mode will be used at the center.
; 1: Enables the center "All directions" mode for resizing (default).
; 2: The windows will be moved instead.
; 3: The closest side mode will be used at the center.

CenterFraction=24
; A fraction in a percent from 0 to 100 that defines the size of the central
; resizing region (default is 24), used to be 33% in AltDrag beta.

MoveTrans=255
; Transparency from 1-254, which is set to the window that is currently
; moved/resized. Lower values are more transparent.
; If set to 0 or 255, the feature is disabled (default is 255).

Language=en-US
SidesFraction=255
; Available languages: en-US (English), fr-FR (French), pl-PL (Polish) etc...
; Default is Auto for automatic selection based on local.

[Input]

UniKeyHoldMenu=0
; If enabled, then a long key press will popup a menu with a list of
; extended/unicode characters that can be typed.

LMB=Move
MMB=Close
RMB=Resize
MB4=AltTabList
MB5=Nothing
Scroll=Maximize
HScroll=Nothing
; Mouse actions for Left, Middle, and Right mouse buttons (MB), MB4,5 and wheel.
; List: Nothing, Move, Resize, Menu, Minimize, Maximize
; Center, AlwaysOnTop, Close, Lower, Borderless
; Kill, Pause, Resume, MaximizeHV, MinAllOther, Mute, SideSnap,
; NStacked, NStacked2, PStacked, PStacked2, StackList, StackList2, ASOnOff, MoveOnOff
; MLZone, MTZone, MRZone, MBZone XLZone, XTZone, XRZone, XBZone
; Wheel actions : Roll, AltTab, Volume, Transparency, HScroll
; Zoom, Zoom2, NPStacked,
; When moving and resizing windows, hold shift to snap to other windows.
; For Volume, Transparency and Zoom, try holding shift to adjust the speed.

LMBB=Nothing
MMBB=AltTabList
RMBB=Nothing
MB4B=Nothing
MB5B=Nothing
ScrollB=HScroll
HScrollB=Nothing
; Alternative action for each button (used when the ModKey is pressed).

LMBT=Nothing
MMBT=Close
RMBT=Nothing
MB4T=Nothing
MB5T=Nothing
ScrollT=Roll
HScrollT=Nothing
; Actions to be performed in the titlebar,
; with or without Alt, see TTBActions.
LMBTB=Nothing
MMBTB=Nothing
RMBTB=Nothing
MB4TB=Nothing
MB5TB=Nothing
ScrollTB=Nothing
HScrollTB=Nothing
; Alternate titlebar actions (.ini only)

GrabWithAlt=Nothing
GrabWithAltB=Nothing
; Substitute Nothing with a hotkey, so you can perform the action
; without needing to click. This is useful for touchpads.
; Try with GrabWithAlt=Resize and set ResizeCenter=2 and CenterFraction=60

MoveUp=Nothing
MoveUpT=Nothing
ResizeUp=Nothing
ResizeUpT=Nothing
MoveUpB=Nothing
ResizeUpB=Nothing
; Actions that will be performed on the click UP even of a Move/Resize
; IF no drag occured AND the click was long or PiercingClick=1.
; The B sufixed version apply if the ModKey is down, as usual.
; /!\ Those actions are not associated with buttons but with Move/Resize.

TTBActions=3
; Perform specific actions when clicking in the titlebar
; If set to 1, to perform the action without Alt
; If set to 2, to perform the action with Alt.
; If set to 3, does both of the above.

ScrollLockState=0
; If set to 1, AltSnap will be disabled when Scroll Lock is OFF.
; If set to 3, AltSnap will be disabled when Scroll Lock is ON.

HScrollKey=10
; List of keys used to transform a vertical scroll into a Horizontal scroll,
; applies only when the InactiveScroll option is used (Old windows versions).
; Default value is 10 ie VK_SHIFT.

Hotkeys=5B 06
; Space-separated hexadecimal values.
; Quick reminder:
; A4 A5 => Left (A4) and right (A5) ALT
; 5B 5C => Left (5B) and right (5C) WIN
; A0 A1 => Left (A0) and right (A1) SHIFT
; A2 A3 => Left (A2) and right (A3) CTRL
; 70 to 87 => F1 to F24 keys
; Values at: https://docs.microsoft.com/en-us/windows/win32/inputdev/virtual-key-codes
; You can specify up to 7 keys.

ModKey=A4
; Modifier keys to use the B action of each button.

Killkeys=09 2E
; Keys that will disable AltSnap when pressed down!
; Space-separated hexadecimal values.
; All keys from A-Z always disable AltSnap, so do not add them here.
; Default is TAB: 09 (for DisplayFusion's Alt+Tab).
; 2E for the DEL key (for Ctrl+Alt+DEL).

Shiftkeys=A0 A1
; Key that is used to snap windows and modify actions
; defaut sis A0 A1 for left and right shift.

EndSendKey=0E
; Key sent at the end of a movement to avoid menu selecting because of Alt
; or to avoid poping up the Windows menu when using WinKey as a hotkey.
; Since the original AltDrag the default value is 11 (VK_CONTROL).
; You can try sending other keys or set to 00 to disable key sending.
; You can try WinKey(5C) if you use Alt(12) as a hotkey or vice-versa.
; You can try using some of the undefined VK-codes such as 0E.

Hotclicks=
; Mouse clicks that can be used to trigger AltSnap.
; This can be used together with the Hotkeys or as a replacement.
; Space-separated hexadecimal values.
; Values: MMB=04, MB4=05, MB5=06, MB6=07, MB7=08, MB8=09, MB9=0A,
; MB10=0B, MB11=0C, MB12=0D, MB13=0E, MB14=0F, MB15=10,
; MB16=11, MB17=12
; Just do not try this with LMB and RMB, please....
; For example, I would suggest using MB4 and MB5 ie: Hotclicks=05 06
; And using MB4=Move and MB5=Resize.
; To use MB6-MB9 see the XXButtons section.
XXButtons=
; List of keys that are actually mapped to extra mouse button (6-17)
; You can specify up to 15 values in the button order you prefer.
; Any key specified here will behave like a mouse button for AltSnap.
; Also the key will ALWAYS be unusable outside of AltSnap
; This is intended for mouse buttons that that are mapped by a
; driver to keyboard keys, If possible use keys that does not exist
; on your keyboard ie: F13-F24.
; The extra buttons defined like this are mapped to MB6/7/8/9(B)(T)
; If you set for example XXButtons=7C 7D 7E 7F, then:
; the F13 key will be mapped to MB6, F14 to MB7 etc.
; MB20 is the maximum button. Those buttons can be added to the Hotclicks

KeyCombo=0
; If set to 1, you will actually need to press two hotkeys
; to enable AltSnap (any combination of two hotkeys).
; You need at least TWO hotkeys!
; Does not apply to Hotclicks!

LongClickMove=0
; Turns a long click in a move.
; This is a way to use AltSnap without keyboard.
; Set to 0 to disable (default)
; Set to 1 to enable and long click delay will be double click delay.

FrameColor=80 00 88
; Hexadecimal color of the hollow rectangle that is used when you disabled
; the FullWin option/Show window content while dragging.
; You need to put spaces between each pair of characters (RR GG BB)
; eg: 00 00 00 for black, FF 00 00 for red, 80 00 80 dark violet...

PinColor=FF FF 00 54
; Like FrameColor but concerns the color of the always on top indicator
; The last byte represents the hex ASCII of the letter to be drawn.
; Default is FF FF 00 54 for Yellow with a T (54).

[Blacklist]
; For all blacklists, items must be separated with a comma and without spaces.
; Spaces can be present in the item itself. eg: "Virtual PC.exe"
; Unicode is fully supported for blacklist items in Windows 2000+
; UCS-2 only in Windows NT4.

Processes=Virtual PC.exe,StartMenuExperienceHost.exe,SearchApp.exe,osk.exe
; List of processes (comma separated) that AltSnap will not interfere with

Windows=Program Manager|Progman*|MultitaskingViewFrame,Volume Control|Tray Volume,Volume Control|Windows.UI.Core.CoreWindow,*|TaskSwitcherWnd,*|TaskSwitcherOverlayWnd,|WorkerW,|Shell_TrayWnd,|BaseBar,|#32768,*|XamlExplorerHostIslandWindow,*|TSSHELLWND,|MozillaDropShadowWindowClass,*|RAIL_WINDOW,VistaSwitcher|VistaSwitcher_SwitcherWnd
; List of windows for which AltSnap is completely disabled

Scroll=
; List of windows that should just ignore the scroll action
; eg: *|Photoshop

MDIs=*|PPTFrameClass,*|MMCMainFrame,*|classFoxitReader
; List of windows for which AltSnap ignores MDI option
; Default is Powerpoint, Microsoft Management Console and Foxit.

Pause=taskmgr.exe,explorer.exe,dwm.exe,Virtual PC.exe,AltSnap.exe
; List of processes that will not be paused or killed
; when using the Pause/resume and Kill keyboard actions.

Snaplist=*|BaseWindow_RootWnd,*|SkinWnd,*|ChatSkinWnd,*|SpotifyMainWindow,*|USurface_*,*|Winamp*,*|M4W_MainWindow,*|SunAwtDialog
; List of windows that should be snapped to, even though they have no caption.
; Use Snaplist=*|* if you want to enable snapping to all border-less windows.

MMBLower=*|CASCADIA_HOSTING_WINDOW_CLASS,*|MozillaDialogClass
; List of windows for which the Titlebar action should not be performed.
; default is MS-WindowTerminal and some popup windows of Firefox.

; For Windows, Snaplist and MDIs:
; Three options are offered to you in this case:
; 1) Set the whole title|class windows info.
; 2) Set all windows from this class with ,*|class.
; 3) Set the window title only with ,title|*.
; Use the "Identify window" option in AltSnap Config.

AResize=*|SunAwtDialog
; List of windows that AltSnap should consider as resizeable
; Only applies when ResizeAll=0
; eg: *|SunAwtDialog for MATLAB's help.

SSizeMove=*|iTunes
; List of windows to which the WM_ENTERSIZEMOVE / WM_EXITSIZEMOVE will not
; be sent. Keep the default value unless you know what you are doing.

NCHittest=*|ApplicationFrameWindow
; List of windows for which AltSnap should try directly to question the
; ancestor window for the Hittest, in order to know where the title bar is.
; Default is *|ApplicationFrameWindow for all METRO apps on Win10+

Bottommost=*|RainmeterMeterWindow
; List of windows that should be kept below other Windows that are lowered
; by AltSnap. Default is *|RainmeterMeterWindow for Rainmaker skin windows.

[Advanced]

TopmostIndicator=1
; Show an indicator on the always on top windows

NumberMenuItems=0
; Use numbers instead of a-z for shortcuts in windows list menu.

AutoRemaximize=1
; Automatically re-maximize windows when you move them between monitors.

SnapThreshold=20
; The distance, in number of pixels, when snapping starts (default 20).

AeroThreshold=5
; Distance in pixels, when Aero snapping to monitor sides (default 5).

SnapGap=0
; Gap in pixels from -128 to +127 between two snapped windows.
; Use negative values if you want an overlap, default is 0
; I suggest -1 under Win10.

KBMoveStep=100
KBMoveSStep=20
; Value in pixels from 1-255.
; To change the steps in pixels
; when moving windows with the keyboard

AeroMaxSpeed=65535
AeroSpeedTau=64
; Speed beyond which AeroSnaps will not occur while Moving.
; AeroMaxSpeed is in pixels/Tau (from 0-65535).
; AeroSpeedTau to specifies Tau time in milliseconds (default 64).
; (i) Set AeroMaxSpeed to a "high" value (like 100) and try to move fast
; a window between two monitors, if it gets aero-snapped, decrease the value
; until it no longer snaps, and check that the window still snaps when you
; want it to.

MultipleInstances=0
; If set to 1, allows running multiple instances of AltSnap.

AlwaysElevate=0
; If set to 1, AltSnap will always request elevation.

ResizeAll=0
; If set to 1, all windows are resizable, even those without borders.
; Note that windows that are in the AResize list will still be resizable.
; Also windows that were made borderless by AltSnap will be resizable.

FullScreen=0
; If set to 1, all fullscreen windows are moveable.
; If set to 0, blacklists all fullscreen windows.
; A fullscreen window is set to your monitor size and has no title bar.
; It is not exactly the same than a Maximized window (see below)

BLMaximized=0
; Set to 1 to disable AltSnap on all Maximized windows.
; If set to 0 (default) maximized windows will be restored by AltSnap.
; Not the same thing than "fullscreen" window but looks quite similar.

AeroTopMaximizes=1
; If set to 1, windows get maximized when snapped at the top
; of the monitor instead of being resized to fill its top half.
; If set to 2, Shift behavior will be inverted for double-right-click:
; Aero Snap <-> Extend border to monitor.
; If set to 3, both of the above work.
; You can always hold Shift to invert the behavior.

UseCursor=1
; If set to 0, disables any cursor handling (not recommended).
; If set to 1, enables all cursor sets (default)
; If set to 2, disables the Hand cursor when moving
; If set to 3, normal cursor is always used, even when resizing.
; If set to 4, uses the ResizeAll cursor for movement instead of the Hand.

MinAlpha=32
; Minimum alpha for the transparency action, from 1-255 (default 32).
AlphaDelta=64
AlphaDeltaShift=8
; Alpha step for the transparency action, from -128 to +127 (default 64).
; The other value is applied when Shift is pressed (default 8).

ZoomFrac=16
ZoomFracShift=64
; By which fraction (2-255) the Zoom action should increase/decrease the size
; of the pointed window. ZoomFrac is without shift and ZoomFracShift
; is with shift. Default is 16th/64th (ZoomFrac=16, ZoomFracShift=64).
; Formula: New Window Size = OldSize + OldSize/ZoomFrac

ShiftSnaps=1
; Set to 0 if you do not want border-to-border windows snapping to be
; Enabled by the shift key (default is 1: enabled).

PiercingClick=1
; Set to 1 to enable, in this case, if you press Alt+Click without moving,
; the click will be transmitted to the pointed program.
; Enabling this option will disable doubleclicking actions!
; If you keep it disabled (default) you still will have the click
; transmission if you hold the click down more than a double click delay.

DragSendsAltCtrl=0
; If set to 1, then Alt_Down, Ctrl_Down, Ctrl_Up, Alt_Up will be sent.
; at the begining of a move/resize action, unless Alt is already down.
; This can help to pop down context menu when the drag starts.

BLCapButtons=3
; Mouse Buttons for which the caption buttons will not be considered
; by AltSnap for the Titlebar action.
; Use 0 to include all mouse buttons.
; Use 1 to exclude the left mouse button only.
; Use 3 (1+2) to exclude the left and right mouse buttons (default).
; Use -1 to exclude all mouse buttons and wheel.
; You can specify any value in decimal converted from a bit mask in the order
; of mouse buttons ie: LMB RMB MMB MB4 MB5...MB20 VWHEEL HWHEEL.
; use BLCapButtons=0 if you always want titlebar actions to be applied
; when clicking caption buttons and use -1 if you never want this.
; For a custom value add the numbers corresponding to each mouse button:
; LMB: 1, RMB: 2, MMB: 4, MB4: 8 MB5: 16 MBX: 2^(X-2)
; VWheel: 1048576, HWheel: 2097152 (buttons 21 and 22)
BLUpperBorder=3
; Same than BLCapButtons except that it concerns the top resizing borders
; instead of only the caption buttons. Default value is 3.

ACMenuItems=-1
; Menu items that will be displayed in the action menu (bit-mask).
; Default is -1 for all menu items.
; If you want only a selection of the menu items, pick them up in the list
; below, sum up the associated numbers and assign the value to `ACMenuItems`
; 1      Toggle Always on top
; 2      Toggle Borderless
; 4      Center window on screen
; 8      Roll/Unroll window
; 16     Lower Window
; 32     Maximize vertically
; 64     Minimize other windows
; 128    Snap To side/corner
; 256    ------------------
; 512    Maximize window
; 1024   Minimize window
; 2048   Close window
; 4096   ----------------
; 8192   Kill program
; 16384  -----------------
; 32768  Movement disabled
; 65536  -----------------
; 131072 Send original click
; 262144 Nothing
; Example: 131072+1+2+8=131083 Nothing+Topmost+Borderless+Roll


[Performance]
FullWin=2
; Set to 1 to force the Drag Full Windows option (old default)
; Set to 0 to force off
; Default is 2: autodetect based on Windows setting

TransWinOpacity=0
; Set opacity from 1-255 of the transparent window used when FullWin=0
; default is 0 which mean no transparency is used (best for performance).
; also 255 has good performance but there is zero opacity.
; If you are using desktop composition or Windows 8+ then there will be
; no significant performance impact to any value.

PinRate=32
; Rate in miliseconds from 1-255 at which the always on top indicator
; will be refreshed. Default is 32. Smaller values will make the
; indicator more reactive but will decrease the performances.

RezTimer=0
; Set to 1 to move the window only when the timestamp of
; a mouse event is different from the previous one, every 16ms
; more or less. MoveRate and ResizeRate and RefreshRate
; will have no effect if the option is enabled.
; This is overall the option that gives the best performances.
; It can be combined with FullWin=0 mode for ~0% CPU usage.

RefreshRate=0
; Minimum delay, in milliseconds, between two refreshes of a window.
; For minimum CPU usage use a value around your monitor's rate:
; 75Hz monitor => RefreshRate=13
; Max value is 255 (4 Hz), sane values are below 100 (10 Hz).
; If set to 0 (default), you get the most reactivity.

MoveRate=2
ResizeRate=4
; The number of pixels to wait before actually moving the window.
; If set to 1, updates will be instant. You will have better perf with
; higher values but you will lose precision in moving/resizing.
; Sane values are below 10. Recommended is 1 to 5

[Zones]
UseZones=1
; If set to 1, enables Snap Layouts (Zones)
; If set to 3, enables Grid mode (configure below)
; If 4 is added window is extended without Ctrl.
; If 8 is added snapping will occur without Shift ie: 1+8 => UseZones=9.
; Shift will disable Zones instead.
; recomended is UseZones=1 or 9 for normal snap Layout with or w/o shift
; and 3+4 => UseZones=7 for grid mode.

; If you set UseZones to 3 or 7 then you enabled the
; GRID MODE that simply cuts each screen into 'parts'.
; You can set the number of parts below:
GridNx=3
; Number of grid columns
GridNy=2
; Number of grid lines

InterZone=32
; Size in pixels between zones from -128 to +127 (default 32)
; where the window will be snapped to the union of zones.
; If set to 0, you cannot cover more than one zone.

FancyZone=1
; If set to 1, enables better FancyZones integration (x64 builds only!).
; Windows snapped by FancyZones will be restored by AltDrag.

Zone0=-957,-1080,-317,0,
Zone1=-317,-1080,323,0,
Zone2=323,-1080,963,0,
Zone3=2243,-1080,2883,0,
Zone4=1603,-1080,2243,0,
Zone5=963,-1080,1603,0,
Zone6=1280,50,1920,1080,
Zone7=640,50,1280,1080,
Zone8=0,50,640,1080,
; List of zones coordinates LEFT,TOP,RIGHT,BOTTOM,
; Up to 2048 zones and all zones end with a comma
; You can use the "Identify Window" option to get the RECT of any window
; You can save a "Snap Layout" from test windows using the tray menu
; This is the preferred way to configure your snap layout.


[KBShortcuts]
UsePtWindow=0
; Set UsePtWindow=1 if you want the pointed window to be used
; instead of the foreground window.
;
; Formula: add the folowing:
; One VK_NUMBER (decimal)
; +256  Alt
; +512  Control
; +1024 Shift
; +2048 Winkey
;
; 883  => Ctrl+Alt+F4
; 1299 => Shift+Alt+Pause, 275 => Alt+Pause
; 2644 => Ctrl+Win+T
; 2336 => Alt+Win+SPACE