From 39210d6daba91e1b97c12cc541eb4604cb000031 Mon Sep 17 00:00:00 2001 From: espr14 Date: Thu, 10 Feb 2022 20:28:38 +0100 Subject: [PATCH] =?UTF-8?q?=F0=9F=A9=B9=20Simplify=20quick=20homing=20feed?= =?UTF-8?q?rate=20(#23714)?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Co-authored-by: Scott Lahteine --- Marlin/src/gcode/calibrate/G28.cpp | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/Marlin/src/gcode/calibrate/G28.cpp b/Marlin/src/gcode/calibrate/G28.cpp index 0cb9bb12ed32..df58992519e4 100644 --- a/Marlin/src/gcode/calibrate/G28.cpp +++ b/Marlin/src/gcode/calibrate/G28.cpp @@ -76,10 +76,9 @@ const int x_axis_home_dir = TOOL_X_HOME_DIR(active_extruder); - const float mlx = max_length(X_AXIS), - mly = max_length(Y_AXIS), - mlratio = mlx > mly ? mly / mlx : mlx / mly, - fr_mm_s = _MIN(homing_feedrate(X_AXIS), homing_feedrate(Y_AXIS)) * SQRT(sq(mlratio) + 1.0); + // Use a higher diagonal feedrate so axes move at homing speed + const float minfr = _MIN(homing_feedrate(X_AXIS), homing_feedrate(Y_AXIS)), + fr_mm_s = HYPOT(minfr, minfr); #if ENABLED(SENSORLESS_HOMING) sensorless_t stealth_states { @@ -95,7 +94,7 @@ }; #endif - do_blocking_move_to_xy(1.5 * mlx * x_axis_home_dir, 1.5 * mly * Y_HOME_DIR, fr_mm_s); + do_blocking_move_to_xy(1.5 * max_length(X_AXIS) * x_axis_home_dir, 1.5 * max_length(Y_AXIS) * Y_HOME_DIR, fr_mm_s); endstops.validate_homing_move();