This site can’t be reached - http://ipkg.nslu2-linux.org/

[cyoussef8]

Cannot access ipkg. Site is down and unreachable as of approximately 2 hours prior to this writing.

[cyoussef8]

13 * * * Request timed out.
14 166 ms 185 ms 166 ms 100ge12-1.core1.sjc2.he.net [184.104.193.49]
15 206 ms 172 ms 182 ms 100ge4-2.core3.fmt2.he.net [72.52.92.245]
16 168 ms 171 ms 166 ms transit.fmt2.rackaloha.net [216.218.185.34]
17 transit.fmt2.rackaloha.net [216.218.185.34] reports: Destination host unreachable.

[ChristiaanWillemsen]

Same issue here

[Nightfall41]

Installing optware-ng/ipkg is also not possible. Please create mirrors. No route to ipkg.nslu2-linux.org as of 29 september 2020

[MFPS-4tech]

Hello, Same issue here. I can't Installing optware-ng/ipkg is also not possible. Day 15 and 16 october 2020

[cyoussef8]

Hey guys, just letting you know I ended up using the Java version of BubbleServer and then using a startup script to run it when the Raspberry Pi 4 turns on.

sudo nano /etc/systemd/system/bubbleserver.service
#startup scripts are stored here

#Then write your script; as follows:

[Unit]

Description= BubbleUPnP Server Background Service Management (Runs launch.sh)

[Service]

ExecStart=/opt/share/bubbleupnpserver/launch.sh

[Install]

WantedBy=multi-user.target

Ctrl + X to save.

Make sure you give folder/file permissions so it can run.

sudo chmod 755 /etc/init.d/BubbleUPnPServer

[gits68]

archive is here https://web.archive.org/web/20211018235104/http://ipkg.nslu2-linux.org/optware-ng