From e456224cf49df7f91802a056663510a342c1e9cb Mon Sep 17 00:00:00 2001 From: Andrew <18502096+classicrocker883@users.noreply.github.com> Date: Sun, 29 Oct 2023 20:05:54 -0400 Subject: [PATCH] Update README.md --- README.md | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/README.md b/README.md index d50aea1035..bdd80b4911 100644 --- a/README.md +++ b/README.md @@ -25,20 +25,27 @@
### - Please read this: - +> [!NOTE] Many Updates have been included in the most recent MRiscoCProUI for the **2023-October** release. This release has many changes to the **UI**. New ICON's have been added, and old ones enhanced. Whoever edited them before saved directly as .*JPG* which in many editors lowers the quality of the image. I painstakingly remastered almost every single one; preserving the original quality. - -You must [REFLASH](https://github.com/classicrocker883/MRiscoCProUI/wiki/HOW-TO-UPDATE-THE-DISPLAY) the *LCD Display* with the new **DWIN_SET**; which is located in the `display assets` folder. + +> You must [REFLASH](https://github.com/classicrocker883/MRiscoCProUI/wiki/HOW-TO-UPDATE-THE-DISPLAY) the *LCD Display* with the new **DWIN_SET**; which is located in the `display assets` folder.
-H32->HC32 support is currently only in the branch **HC32-<Month>**. You can find the original repo here [@shadow578/Marlin-H32](https://github.com/shadow578/Marlin-H32)
#### Important Info regarding HC32: +* H32->HC32 support is currently only in the branch **HC32-<Month>**. You can find the original repo here [@shadow578/Marlin-H32](https://github.com/shadow578/Marlin-H32) * I have created a second build using the JyersUI as a workaround for the save/store settings issue with ProUI. However, that is also a work-in-progress. I will have both build types available. -* * **FOREWARNING**: So far everything has been working great - as normal - except there are reports of it restarting after saving with no other negative effects. So far, that is the only issue. I just wanted to give advance notice and if there is anything else to report please do so under [Issues tab](https://github.com/classicrocker883/MriscocProUI/issues). +* * > [!NOTE] + > **FOREWARNING**: So far everything has been working great - as normal - except there are reports of it restarting after saving with no other negative effects. So far, that is the only issue. I just wanted to give advance notice and if there is anything else to report please do so under [Issues tab](https://github.com/classicrocker883/MriscocProUI/issues). + * > Previous Issue of it restarting when saving/store settings has been fixed in the more recent ProUI version (October Rev.1). HOWEVER, now there is a current Issue to be addressed:
+The screen freezes and restarts when SD card is inserted. This means that everything so far seems to work correctly as it should, except for when an SD card is inserted, so printing may not be possible unless you use USB serial interface to upload the file (through a slicer or something like Pronterface). + > This issue is now the main focus to be fixed. + > If this is an inconvenience then you can use an earlier version which can allow the **SD Card** to be used.
+#### Other Information: General information about the firmware and updates is located in the _Wiki_ page [What's New In This Release](https://github.com/classicrocker883/MriscocProUI/wiki/What's-New-in-this-Release).
Other changes and updates are [addressed here](https://github.com/classicrocker883/MriscocProUI/releases/latest) and are [addressed here](https://github.com/mriscoc/Ender3V2S1/releases/latest). #### One important change to note is the `Mesh Inset` now saves upon restart -- it is working as normal.