| description |
|---|
Credit to Roxana Kovaci (https://twitter.com/RoxanaKovaci) and her SteelCon IPv6 workshop |
Using IP:
# /sbin/ip -6 route add <ipv6network>/<prefixlength> dev <device>
Example:
# /sbin/ip -6 route add default dev eth0 metric 1
or
# /sbin/ip -6 route add <ipv6> via 2001:0db8:0:f101::1
Metric ”1” is used here to be compatible with the metric used by route, because the default metric on using ”ip” is ”1024”.
****
Using "route":
Usage:
# /sbin/route -A inet6 add <ipv6network>/<prefixlength> dev <device>
Example:
# /sbin/route -A inet6 add default dev eth0
Removing an IPv6 route through an interface
Not so often needed to use by hand, configuration scripts will use such on shutdown.
Using "ip"
Usage:
# /sbin/ip -6 route del <ipv6network>/<prefixlength> dev <device>
Example:
# /sbin/ip -6 route del default dev eth0
Using "route"
Usage:
# /sbin/route -A inet6 del <network>/<prefixlength> dev <device>
Example:
# /sbin/route -A inet6 del default dev eth0
socat port-forwarding
socat TCP4-LISTEN:8080,reuseaddr,fork TCP6:[fe80::20c:29ff:fe69:c4e5%eth0]:80
- you can then browse to 127.0.0.1:8080 and reach the IPv6 host on port 80
ssh -6 user@fe80::cdf3:42e1:63d8:5227 -L 80:[fe80::20c:29ff:fe69:c4e5%ens33]:80
- After this, connecting to [::1]:80 will actually connect to the service on fe80::20c:29ff:fe69:c4e5 on port 80 dynamic port-forwarding
ssh -6 -D 9010 user@fe80::cdf3:42e1:63d8:5227
- change your proxychains.conf file to point to socks5 ::1 9010
After this, prefix all your commands with proxychains:
./proxychains4 -f src/proxychains.conf nmap -sT -p21,80,445,1433,3389 -n -Pn fe80::3c0c:8c8f:6abd:93ae%ens33
quick port scanner through proxychains
while read -r line; do timeout 0.2s ./proxychains4 -f src/proxychains.conf ncat -6 -w1 -z fe80::cdf3:42e1:63d8:5227%ens33 $line 2>&1 | grep OK;done < ports.txt
where ports.txt has port numbers line by line
Accessing RDP through the proxychains:
./proxychains4 -f src/proxychains.conf rdesktop fe80::cdf3:42e1:63d8:5227%ens33