1080 Gaming Z LED Issue

[MrDexter]

Bug issue

Expected Behaviour

All lights change when changed in the program including color and effect

Actual Behaviour

The LEDs on the bottom change with the effect but not color. Backplate stays the same.

Step to reproduce

Changed colors, effects

Hardware

MSI GTX 1080 Gaming Z

[ggr18]

What light mode/s?

[MrDexter]

All, Normally lower LEDs will change with effect and if you try a couple times LED will change but out of sink. Light color never changes and backplate always stays the same.

[ggr18]

I will test it.

[MinDBreaK]

Hey !
Can you copy/paste the content of the debug window please ? That would help :)

[MrDexter]

Vendor Code : N/A
Device Code : N/A
Subvendor Code : N/A
Manufacturer : Nvidia

[MinDBreaK]

Ok then, not very helpful xD
I'll have to review this ><

[ggr18]

Do you have the latest drivers installed? PnP card sounds like you have not installed any drivers.

Also, what windows version are you running?

[MinDBreaK]

Do you have Integrated graphics ? I've seen this sort of thing when I was running it on a computer with IG.

I'll improve the debug when I'll have time

[ggr18]

A copy-paste or a GPU-Z screenshot of the main window would be nice too.

[MrDexter]

https://gyazo.com/8a264f26c15149f3802a035b74de29d2

[MrDexter]

Latest drivers on Geforce experience are installed. I do have integrated but no drivers are installed for it. (CPU I7 4790K)

[MinDBreaK]

Ok !
Well the good news is I that I know why there is nothing in debug.

The bad news is that I won’t have much time any soon

[MinDBreaK]

Can you try the latest commit I added a controller missing. This might fix your issue

[MrDexter]

Downloaded the latest release and tried again. Still the same

PnP Card :
Vendor Code : N/A
Device Code : N/A
Subvendor Code : N/A
Manufacturer : Nvidia

[MinDBreaK]

No I didn't updated the release. You would have to compile on your own. I'll make a release once I fixed the debug

[MrDexter]

Sorry for the late reply, How would I go about compiling it myself? Thanks

[MinDBreaK]

You need to clone the repo and open the solution (.sln) in Visual Studio 2017/2016.

Then you just need to clic Run in All CPU mode (by default) and Debug mode (by default)

[MrDexter]

https://gyazo.com/4843a81fcdfed22e0253cc0b8581741a

[MinDBreaK]

I’m working on a fix, but I’m facing some issues when changing color mode.

I’ll try to fix it to make a release as soon as possible.

[MinDBreaK]

I have published a new realease so you should be able to see the debug window