Skip to content

Latest commit

 

History

History
90 lines (79 loc) · 3.96 KB

README.md

File metadata and controls

90 lines (79 loc) · 3.96 KB
Raw

Lazytainer - Lazy Load Containers

Putting your containers to sleep Docker

Quick Explanation

Monitors network traffic to containers. If there is traffic, the container runs, otherwise the container is stopped/paused. for more details check out the Configuration section.

Want to test it?

  1. Clone the project 
    git clone https://github.com/vmorganp/Lazytainer
cd Lazytainer
  2. Start the stack 
    docker-compose up
    This will create 2 containers that you can reach through a third "lazytainer" container
  3. View the running container by navigating to its web ui at http://localhost:81. You should see some information about the container
  4. Close the tab and wait until the logs say "stopped container"
  5. Navigate again to http://localhost:81, it should be a dead page
  6. Navigate to http://localhost:81 several times, enough to generate some network traffic, and it should start
  7. To clean up, run 
    docker-compose down

Configuration

Note:

Lazytainer does not "automatically" start and stop all of your containers. You must apply a label to them and proxy their traffic through the Lazytainer container.

Examples

For examples of lazytainer in action, check out the Examples

Groups

Lazytainer starts and stops other containers in "groups" of one or more other containers. To assign a container to a lazytainer group, a label must be added. The label will look like this.

yourContainerThatWillSleep:
  # ... configuration omitted for brevity
  labels:
    - "lazytainer.group=<yourGroupName>"

To configure a group, add labels to the lazytainer container like this. Note that each is required to have a port(s) specified. These ports must also be forwarded on the lazytainer container

  lazytainer:
    # ... configuration omitted for brevity
    ports: 
      - 81:81 # used by group1 and group2
      - 82:82 # used by group2
    labels:
      # Configuration items are formatted like this
      - "lazytainer.group.<yourGroupName>.<property>=value"
      # configuration for group 1
      - "lazytainer.group.group1.ports=81"
      # configuration for group 2
      - "lazytainer.group.group2.ports=81,82"

Group properties that can be changed include:

Name description required default
ports Network ports associated with a group, can be comma separated Yes n/a
inactiveTimeout Time (seconds) before container is stopped when there is insufficient network activity No 30
minPacketThreshold Minimum count of network packets for container to be on No 30
pollRate How frequently (seconds) to check network activity No 30
sleepMethod How to put the container to sleep. Can be stop or pause No stop
netInterface Network interface to listen on No eth0

Additional Configuration

Verbose Logging

If you would like more verbose logging, you can apply the environment variable VERBOSE=true to lazytainer like so

  lazytainer:
    # ... configuration omitted for brevity
    environment:
      - VERBOSE=true

Volumes

If using lazytainer, you MUST provide the following volume to lazytainer

  lazytainer:
    # ... configuration omitted for brevity
    volumes:
      - /var/run/docker.sock:/var/run/docker.sock:ro