From 20073e1c1df055e3a4017758ea07e443a9d49041 Mon Sep 17 00:00:00 2001 From: Marcio Teixeira Date: Wed, 21 Aug 2019 14:42:40 -0600 Subject: [PATCH 1/4] Update to USB_FLASH_DRIVE_SUPPORT - Improvements to USB state machine - Added support for UHS 3.0 (experimental) --- Marlin/Configuration_adv.h | 20 +- .../sd/usb_flashdrive/Sd2Card_FlashDrive.cpp | 294 +- .../sd/usb_flashdrive/Sd2Card_FlashDrive.h | 24 +- .../{SOURCES.txt => lib-uhs2/README.txt} | 20 +- .../usb_flashdrive/{lib => lib-uhs2}/Usb.cpp | 2 +- .../sd/usb_flashdrive/{lib => lib-uhs2}/Usb.h | 3 +- .../{lib => lib-uhs2}/UsbCore.h | 0 .../{lib => lib-uhs2}/address.h | 0 .../{lib => lib-uhs2}/confdescparser.h | 0 .../{lib => lib-uhs2}/hexdump.h | 0 .../usb_flashdrive/{lib => lib-uhs2}/macros.h | 0 .../{lib => lib-uhs2}/masstorage.cpp | 4 +- .../{lib => lib-uhs2}/masstorage.h | 0 .../{lib => lib-uhs2}/max3421e.h | 9 + .../{lib => lib-uhs2}/message.cpp | 2 +- .../{lib => lib-uhs2}/message.h | 0 .../{lib => lib-uhs2}/parsetools.cpp | 2 +- .../{lib => lib-uhs2}/parsetools.h | 0 .../{lib => lib-uhs2}/printhex.h | 0 .../{lib => lib-uhs2}/settings.h | 0 .../{lib => lib-uhs2}/usb_ch9.h | 0 .../{usb_host.cpp => lib-uhs2/usbhost.cpp} | 8 +- .../{usb_host.h => lib-uhs2/usbhost.h} | 0 .../src/sd/usb_flashdrive/lib-uhs3/README.txt | 31 + .../UHS_BULK_STORAGE/UHS_BULK_STORAGE.h | 249 ++ .../UHS_BULK_STORAGE_INLINE.h | 1210 +++++++ .../UHS_host/UHS_BULK_STORAGE/UHS_SCSI.h | 328 ++ .../lib-uhs3/UHS_host/UHS_UNOFFICIAL_IDs.h | 33 + .../lib-uhs3/UHS_host/UHS_USB_IDs.h | 2995 +++++++++++++++++ .../lib-uhs3/UHS_host/UHS_UsbCore.h | 336 ++ .../lib-uhs3/UHS_host/UHS_address.h | 248 ++ .../lib-uhs3/UHS_host/UHS_hexdump.h | 70 + .../lib-uhs3/UHS_host/UHS_host.h | 111 + .../lib-uhs3/UHS_host/UHS_host_INLINE.h | 1224 +++++++ .../lib-uhs3/UHS_host/UHS_macros.h | 393 +++ .../lib-uhs3/UHS_host/UHS_message.h | 91 + .../lib-uhs3/UHS_host/UHS_printf_HELPER.h | 201 ++ .../lib-uhs3/UHS_host/UHS_printhex.h | 96 + .../lib-uhs3/UHS_host/UHS_settings.h | 141 + .../lib-uhs3/UHS_host/UHS_usb_ch9.h | 222 ++ .../lib-uhs3/UHS_host/UHS_usbhost.h | 452 +++ .../lib-uhs3/UHS_host/UHS_util_INLINE.h | 129 + .../UHS_host/USB_HOST_SHIELD/UHS_max3421e.h | 226 ++ .../USB_HOST_SHIELD/USB_HOST_SHIELD.h | 519 +++ .../USB_HOST_SHIELD/USB_HOST_SHIELD_INLINE.h | 1003 ++++++ .../lib-uhs3/UHS_host/macro_logic.h | 153 + .../lib-uhs3/dyn_SWI/SWI_INLINE.h | 246 ++ .../usb_flashdrive/lib-uhs3/dyn_SWI/dyn_SWI.h | 172 + .../usb-2.0-host-library-changes.patch | 187 - config/default/Configuration_adv.h | 20 +- .../3DFabXYZ/Migbot/Configuration_adv.h | 20 +- .../ADIMLab/Granty/Configuration_adv.h | 20 +- .../AlephObjects/TAZ4/Configuration_adv.h | 20 +- .../examples/Alfawise/U20/Configuration_adv.h | 20 +- .../AliExpress/UM2pExt/Configuration_adv.h | 20 +- config/examples/Anet/A2/Configuration_adv.h | 20 +- .../examples/Anet/A2plus/Configuration_adv.h | 20 +- config/examples/Anet/A6/Configuration_adv.h | 20 +- config/examples/Anet/A8/Configuration_adv.h | 20 +- .../examples/Anet/A8plus/Configuration_adv.h | 20 +- config/examples/Anet/E16/Configuration_adv.h | 20 +- .../examples/AnyCubic/i3/Configuration_adv.h | 20 +- config/examples/ArmEd/Configuration_adv.h | 20 +- .../BIBO/TouchX/cyclops/Configuration_adv.h | 20 +- .../BIBO/TouchX/default/Configuration_adv.h | 20 +- .../examples/BQ/Hephestos/Configuration_adv.h | 20 +- .../BQ/Hephestos_2/Configuration_adv.h | 20 +- config/examples/BQ/WITBOX/Configuration_adv.h | 20 +- config/examples/Cartesio/Configuration_adv.h | 20 +- .../Creality/CR-10/Configuration_adv.h | 20 +- .../Creality/CR-10S/Configuration_adv.h | 20 +- .../Creality/CR-10_5S/Configuration_adv.h | 20 +- .../Creality/CR-10mini/Configuration_adv.h | 20 +- .../Creality/CR-20 Pro/Configuration_adv.h | 20 +- .../Creality/CR-20/Configuration_adv.h | 20 +- .../Creality/CR-8/Configuration_adv.h | 20 +- .../Creality/Ender-2/Configuration_adv.h | 20 +- .../Creality/Ender-3/Configuration_adv.h | 20 +- .../Creality/Ender-4/Configuration_adv.h | 20 +- .../Creality/Ender-5/Configuration_adv.h | 20 +- .../Dagoma/Disco Ultimate/Configuration_adv.h | 20 +- .../Sidewinder X1/Configuration_adv.h | 20 +- .../examples/Einstart-S/Configuration_adv.h | 20 +- .../FYSETC/AIO_II/Configuration_adv.h | 20 +- .../Cheetah 1.2/BLTouch/Configuration_adv.h | 20 +- .../Cheetah 1.2/base/Configuration_adv.h | 20 +- .../Cheetah/BLTouch/Configuration_adv.h | 20 +- .../FYSETC/Cheetah/base/Configuration_adv.h | 20 +- config/examples/Felix/Configuration_adv.h | 20 +- .../FlashForge/CreatorPro/Configuration_adv.h | 20 +- .../FolgerTech/i3-2020/Configuration_adv.h | 20 +- .../Formbot/Raptor/Configuration_adv.h | 20 +- .../Formbot/T_Rex_2+/Configuration_adv.h | 20 +- .../Formbot/T_Rex_3/Configuration_adv.h | 20 +- .../examples/Geeetech/A10/Configuration_adv.h | 20 +- .../Geeetech/A10M/Configuration_adv.h | 20 +- .../Geeetech/A20M/Configuration_adv.h | 20 +- .../Geeetech/MeCreator2/Configuration_adv.h | 20 +- .../Prusa i3 Pro C/Configuration_adv.h | 20 +- .../Prusa i3 Pro W/Configuration_adv.h | 20 +- config/examples/HMS434/Configuration_adv.h | 20 +- .../Infitary/i3-M508/Configuration_adv.h | 20 +- .../examples/JGAurora/A1/Configuration_adv.h | 20 +- .../examples/JGAurora/A5/Configuration_adv.h | 20 +- .../examples/JGAurora/A5S/Configuration_adv.h | 20 +- .../examples/MakerParts/Configuration_adv.h | 20 +- .../examples/Malyan/M150/Configuration_adv.h | 20 +- .../examples/Malyan/M200/Configuration_adv.h | 20 +- .../Micromake/C1/enhanced/Configuration_adv.h | 20 +- config/examples/Mks/Robin/Configuration_adv.h | 20 +- config/examples/Mks/Sbase/Configuration_adv.h | 20 +- .../RapideLite/RL200/Configuration_adv.h | 20 +- config/examples/RigidBot/Configuration_adv.h | 20 +- config/examples/SCARA/Configuration_adv.h | 20 +- .../Black_STM32F407VET6/Configuration_adv.h | 20 +- .../examples/Sanguinololu/Configuration_adv.h | 20 +- .../Tevo/Michelangelo/Configuration_adv.h | 20 +- .../Tevo/Tarantula Pro/Configuration_adv.h | 20 +- .../Tornado/V1 (MKS Base)/Configuration_adv.h | 20 +- .../V2 (MKS GEN-L)/Configuration_adv.h | 20 +- config/examples/TheBorg/Configuration_adv.h | 20 +- config/examples/TinyBoy2/Configuration_adv.h | 20 +- .../examples/Tronxy/X3A/Configuration_adv.h | 20 +- .../Tronxy/X5S-2E/Configuration_adv.h | 20 +- .../UltiMachine/Archim1/Configuration_adv.h | 20 +- .../UltiMachine/Archim2/Configuration_adv.h | 20 +- .../examples/VORONDesign/Configuration_adv.h | 20 +- .../Velleman/K8200/Configuration_adv.h | 20 +- .../Velleman/K8400/Configuration_adv.h | 20 +- .../WASP/PowerWASP/Configuration_adv.h | 20 +- .../Wanhao/Duplicator 6/Configuration_adv.h | 20 +- .../Duplicator i3 Mini/Configuration_adv.h | 20 +- .../delta/Anycubic/Kossel/Configuration_adv.h | 20 +- .../Dreammaker/Overlord/Configuration_adv.h | 20 +- .../Overlord_Pro/Configuration_adv.h | 20 +- .../FLSUN/auto_calibrate/Configuration_adv.h | 20 +- .../delta/FLSUN/kossel/Configuration_adv.h | 20 +- .../FLSUN/kossel_mini/Configuration_adv.h | 20 +- .../Geeetech/Rostock 301/Configuration_adv.h | 20 +- .../delta/MKS/SBASE/Configuration_adv.h | 20 +- .../Tevo Little Monster/Configuration_adv.h | 20 +- .../delta/generic/Configuration_adv.h | 20 +- .../delta/kossel_mini/Configuration_adv.h | 20 +- .../delta/kossel_xl/Configuration_adv.h | 20 +- .../gCreate/gMax1.5+/Configuration_adv.h | 20 +- config/examples/makibox/Configuration_adv.h | 20 +- .../tvrrug/Round2/Configuration_adv.h | 20 +- config/examples/wt150/Configuration_adv.h | 20 +- 148 files changed, 12942 insertions(+), 492 deletions(-) rename Marlin/src/sd/usb_flashdrive/{SOURCES.txt => lib-uhs2/README.txt} (74%) rename Marlin/src/sd/usb_flashdrive/{lib => lib-uhs2}/Usb.cpp (99%) rename Marlin/src/sd/usb_flashdrive/{lib => lib-uhs2}/Usb.h (96%) rename Marlin/src/sd/usb_flashdrive/{lib => lib-uhs2}/UsbCore.h (100%) rename Marlin/src/sd/usb_flashdrive/{lib => lib-uhs2}/address.h (100%) rename Marlin/src/sd/usb_flashdrive/{lib => lib-uhs2}/confdescparser.h (100%) rename Marlin/src/sd/usb_flashdrive/{lib => lib-uhs2}/hexdump.h (100%) rename Marlin/src/sd/usb_flashdrive/{lib => lib-uhs2}/macros.h (100%) rename Marlin/src/sd/usb_flashdrive/{lib => lib-uhs2}/masstorage.cpp (99%) rename Marlin/src/sd/usb_flashdrive/{lib => lib-uhs2}/masstorage.h (100%) rename Marlin/src/sd/usb_flashdrive/{lib => lib-uhs2}/max3421e.h (98%) rename Marlin/src/sd/usb_flashdrive/{lib => lib-uhs2}/message.cpp (98%) rename Marlin/src/sd/usb_flashdrive/{lib => lib-uhs2}/message.h (100%) rename Marlin/src/sd/usb_flashdrive/{lib => lib-uhs2}/parsetools.cpp (97%) rename Marlin/src/sd/usb_flashdrive/{lib => lib-uhs2}/parsetools.h (100%) rename Marlin/src/sd/usb_flashdrive/{lib => lib-uhs2}/printhex.h (100%) rename Marlin/src/sd/usb_flashdrive/{lib => lib-uhs2}/settings.h (100%) rename Marlin/src/sd/usb_flashdrive/{lib => lib-uhs2}/usb_ch9.h (100%) rename Marlin/src/sd/usb_flashdrive/{usb_host.cpp => lib-uhs2/usbhost.cpp} (97%) rename Marlin/src/sd/usb_flashdrive/{usb_host.h => lib-uhs2/usbhost.h} (100%) create mode 100644 Marlin/src/sd/usb_flashdrive/lib-uhs3/README.txt create mode 100644 Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_BULK_STORAGE/UHS_BULK_STORAGE.h create mode 100644 Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_BULK_STORAGE/UHS_BULK_STORAGE_INLINE.h create mode 100644 Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_BULK_STORAGE/UHS_SCSI.h create mode 100644 Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_UNOFFICIAL_IDs.h create mode 100644 Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_USB_IDs.h create mode 100644 Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_UsbCore.h create mode 100644 Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_address.h create mode 100644 Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_hexdump.h create mode 100644 Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_host.h create mode 100644 Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_host_INLINE.h create mode 100644 Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_macros.h create mode 100644 Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_message.h create mode 100644 Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_printf_HELPER.h create mode 100644 Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_printhex.h create mode 100644 Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_settings.h create mode 100644 Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_usb_ch9.h create mode 100644 Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_usbhost.h create mode 100644 Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_util_INLINE.h create mode 100644 Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/USB_HOST_SHIELD/UHS_max3421e.h create mode 100644 Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/USB_HOST_SHIELD/USB_HOST_SHIELD.h create mode 100644 Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/USB_HOST_SHIELD/USB_HOST_SHIELD_INLINE.h create mode 100644 Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/macro_logic.h create mode 100644 Marlin/src/sd/usb_flashdrive/lib-uhs3/dyn_SWI/SWI_INLINE.h create mode 100644 Marlin/src/sd/usb_flashdrive/lib-uhs3/dyn_SWI/dyn_SWI.h delete mode 100644 Marlin/src/sd/usb_flashdrive/usb-2.0-host-library-changes.patch diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index b009eb612d95..68fb51ef5785 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.cpp b/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.cpp index d63a2b9f0fd7..552b34bde6e3 100644 --- a/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.cpp +++ b/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.cpp @@ -22,12 +22,75 @@ #include "../../inc/MarlinConfigPre.h" +/** + * Adjust USB_DEBUG to select debugging verbosity. + * 0 - no debug messages + * 1 - basic insertion/removal messages + * 2 - show USB state transitions + * 3 - perform block range checking + * 4 - print each block access + */ +#define USB_DEBUG 1 +#define USB_STARTUP_DELAY 0 + +// uncomment to get 'printf' console debugging. NOT FOR UNO! +//#define HOST_DEBUG(...) {char s[255]; sprintf(s,__VA_ARGS__); SERIAL_ECHOLNPAIR("UHS:",s);} +//#define BS_HOST_DEBUG(...) {char s[255]; sprintf(s,__VA_ARGS__); SERIAL_ECHOLNPAIR("UHS:",s);} +//#define MAX_HOST_DEBUG(...) {char s[255]; sprintf(s,__VA_ARGS__); SERIAL_ECHOLNPAIR("UHS:",s);} + #if ENABLED(USB_FLASH_DRIVE_SUPPORT) +#include "../../Marlin.h" #include "../../core/serial.h" +#include "../../module/temperature.h" + +static_assert(USB_CS_PIN != -1, "USB_CS_PIN must be defined"); +static_assert(USB_INTR_PIN != -1, "USB_INTR_PIN must be defined"); + +#if ENABLED(USE_UHS3_USB) + #define NO_AUTO_SPEED + #define UHS_MAX3421E_SPD 8000000 >> SPI_SPEED + #define UHS_DEVICE_WINDOWS_USB_SPEC_VIOLATION_DESCRIPTOR_DEVICE 1 + #define UHS_HOST_MAX_INTERFACE_DRIVERS 2 + #define MASS_MAX_SUPPORTED_LUN 1 + #define USB_HOST_SERIAL MYSERIAL0 + + // Workaround for certain issues with UHS3 + #define SKIP_PAGE3F // Required for IOGEAR media adapter + #define USB_NO_TEST_UNIT_READY // Required for removable media adapter + #define USB_HOST_MANUAL_POLL // Optimization to shut off IRQ automatically + + // Workarounds for keeping Marlin's watchdog timer from barking... + void marlin_yield() { + thermalManager.manage_heater(); + } + #define SYSTEM_OR_SPECIAL_YIELD(...) marlin_yield(); + #define delay(x) safe_delay(x) + + #define LOAD_USB_HOST_SYSTEM + #define LOAD_USB_HOST_SHIELD + #define LOAD_UHS_BULK_STORAGE + + #define MARLIN_UHS_WRITE_SS(v) WRITE(USB_CS_PIN, v) + #define MARLIN_UHS_READ_IRQ() READ(USB_INTR_PIN) + + #include "lib-uhs3/UHS_host/UHS_host.h" + + MAX3421E_HOST usb(USB_CS_PIN, USB_INTR_PIN); + UHS_Bulk_Storage bulk(&usb); + + #define UHS_START (usb.Init() == 0) + #define UHS_STATE(state) UHS_USB_HOST_STATE_##state +#else + #include "lib-uhs2/Usb.h" + #include "lib-uhs2/masstorage.h" -#include "lib/Usb.h" -#include "lib/masstorage.h" + USB usb; + BulkOnly bulk(&usb); + + #define UHS_START usb.start() + #define UHS_STATE(state) USB_STATE_##state +#endif #include "Sd2Card_FlashDrive.h" @@ -35,10 +98,41 @@ #include "../../lcd/ultralcd.h" #endif -USB usb; -BulkOnly bulk(&usb); +static enum { + UNINITIALIZED, + DO_STARTUP, + WAIT_FOR_DEVICE, + WAIT_FOR_LUN, + MEDIA_READY, + MEDIA_ERROR +} state; + +#if USB_DEBUG >= 3 + uint32_t lun0_capacity; +#endif + +bool Sd2Card::usbStartup() { + if(state <= DO_STARTUP) { + SERIAL_ECHOPGM("Starting USB host..."); + if (!UHS_START) { + SERIAL_ECHOLNPGM(" failed."); + #if EITHER(ULTRA_LCD, EXTENSIBLE_UI) + LCD_MESSAGEPGM("USB start failed"); + #endif + return false; + } -Sd2Card::state_t Sd2Card::state; + // SPI quick test - check revision register + switch(usb.regRd(rREVISION)) { + case 0x01: SERIAL_ECHOLNPGM("rev.01 started"); break; + case 0x12: SERIAL_ECHOLNPGM("rev.02 started"); break; + case 0x13: SERIAL_ECHOLNPGM("rev.03 started"); break; + default: SERIAL_ECHOLNPGM("started. rev unknown."); break; + } + state = WAIT_FOR_DEVICE; + } + return true; +} // The USB library needs to be called periodically to detect USB thumbdrive // insertion and removals. Call this idle() function periodically to allow @@ -46,75 +140,149 @@ Sd2Card::state_t Sd2Card::state; // of initializing the USB library for the first time. void Sd2Card::idle() { - static uint32_t next_retry; - - switch (state) { - case USB_HOST_DELAY_INIT: - next_retry = millis() + 2000; - state = USB_HOST_WAITING; - break; - case USB_HOST_WAITING: - if (ELAPSED(millis(), next_retry)) { - next_retry = millis() + 2000; - state = USB_HOST_UNINITIALIZED; - } - break; - case USB_HOST_UNINITIALIZED: - SERIAL_ECHOPGM("Starting USB host..."); - if (!usb.start()) { - SERIAL_ECHOPGM(" Failed. Retrying in 2s."); - #if HAS_DISPLAY - LCD_MESSAGEPGM("USB start failed"); - #endif - state = USB_HOST_DELAY_INIT; + usb.Task(); + + const uint8_t task_state = usb.getUsbTaskState(); + + #if USB_DEBUG >= 2 + if(state > DO_STARTUP) { + static uint8_t laststate = 232; + if(task_state != laststate) { + laststate = task_state; + #define UHS_USB_DEBUG(x) case UHS_STATE(x): SERIAL_ECHOLNPGM(#x); break + switch(task_state) { + UHS_USB_DEBUG(IDLE); + UHS_USB_DEBUG(RESET_DEVICE); + UHS_USB_DEBUG(RESET_NOT_COMPLETE); + UHS_USB_DEBUG(DEBOUNCE); + UHS_USB_DEBUG(DEBOUNCE_NOT_COMPLETE); + UHS_USB_DEBUG(WAIT_SOF); + UHS_USB_DEBUG(ERROR); + UHS_USB_DEBUG(CONFIGURING); + UHS_USB_DEBUG(CONFIGURING_DONE); + UHS_USB_DEBUG(RUNNING); + default: + SERIAL_ECHOLNPAIR("UHS_USB_HOST_STATE: ", task_state); + break; + } } - else - state = USB_HOST_INITIALIZED; - SERIAL_EOL(); - break; - case USB_HOST_INITIALIZED: - const uint8_t lastUsbTaskState = usb.getUsbTaskState(); - usb.Task(); - const uint8_t newUsbTaskState = usb.getUsbTaskState(); - - if (lastUsbTaskState == USB_STATE_RUNNING && newUsbTaskState != USB_STATE_RUNNING) { - // the user pulled the flash drive. Make sure the bulk storage driver releases the address - #ifdef USB_DEBUG - SERIAL_ECHOLNPGM("USB drive removed"); + } + #endif + + static millis_t next_state_ms = millis(); + + #define GOTO_STATE_AFTER_DELAY(STATE, DELAY) do {state = STATE; next_state_ms = millis() + DELAY; } while(0) + + if(ELAPSED(millis(), next_state_ms)) { + GOTO_STATE_AFTER_DELAY(state, 250); // Default delay + + switch(state) { + + case UNINITIALIZED: + #ifndef MANUAL_USB_STARTUP + GOTO_STATE_AFTER_DELAY( DO_STARTUP, USB_STARTUP_DELAY ); #endif - //bulk.Release(); - } - if (lastUsbTaskState != USB_STATE_RUNNING && newUsbTaskState == USB_STATE_RUNNING) { - #ifdef USB_DEBUG - SERIAL_ECHOLNPGM("USB drive inserted"); + break; + + case DO_STARTUP: + usbStartup(); + break; + + case WAIT_FOR_DEVICE: + if(task_state == UHS_STATE(RUNNING)) { + #if USB_DEBUG >= 1 + SERIAL_ECHOLNPGM("USB device inserted"); + #endif + GOTO_STATE_AFTER_DELAY( WAIT_FOR_LUN, 250 ); + } + break; + + case WAIT_FOR_LUN: + /* USB device is inserted, but if it is an SD card, + * adapter it may not have an SD card in it yet. */ + if(bulk.LUNIsGood(0)) { + #if USB_DEBUG >= 1 + SERIAL_ECHOLNPGM("LUN is good"); + #endif + GOTO_STATE_AFTER_DELAY( MEDIA_READY, 100 ); + } else { + #ifdef USB_HOST_MANUAL_POLL + // Make sure we catch disconnect events + usb.busprobe(); + usb.VBUS_changed(); + #endif + #if USB_DEBUG >= 1 + SERIAL_ECHOLNPGM("Waiting for media"); + #endif + #if EITHER(ULTRA_LCD, EXTENSIBLE_UI) + LCD_MESSAGEPGM("Waiting for media"); + #endif + GOTO_STATE_AFTER_DELAY(state, 2000); + } + break; + + case MEDIA_READY: + break; + + case MEDIA_ERROR: + break; + } + + if(state > WAIT_FOR_DEVICE && task_state != UHS_STATE(RUNNING)) { + // Handle device removal events + #if USB_DEBUG >= 1 + SERIAL_ECHOLNPGM("USB device removed"); + #endif + #if EITHER(ULTRA_LCD, EXTENSIBLE_UI) + if(state != MEDIA_READY) + LCD_MESSAGEPGM("USB device removed"); + #endif + GOTO_STATE_AFTER_DELAY( WAIT_FOR_DEVICE, 0 ); + } + + else if(state > WAIT_FOR_LUN && !bulk.LUNIsGood(0)) { + // Handle media removal events + #if USB_DEBUG >= 1 + SERIAL_ECHOLNPGM("Media removed"); + #endif + #if EITHER(ULTRA_LCD, EXTENSIBLE_UI) + LCD_MESSAGEPGM("Media removed"); + #endif + GOTO_STATE_AFTER_DELAY( WAIT_FOR_DEVICE, 0 ); + } + + else if(task_state == UHS_STATE(ERROR)) { + #if EITHER(ULTRA_LCD, EXTENSIBLE_UI) + LCD_MESSAGEPGM("Media read error"); #endif - } - break; + GOTO_STATE_AFTER_DELAY( MEDIA_ERROR, 0 ); + } } } // Marlin calls this function to check whether an USB drive is inserted. // This is equivalent to polling the SD_DETECT when using SD cards. bool Sd2Card::isInserted() { - return usb.getUsbTaskState() == USB_STATE_RUNNING; + return state == MEDIA_READY; } -// Marlin calls this to initialize an SD card once it is inserted. -bool Sd2Card::init(const uint8_t sckRateID/*=0*/, const pin_t chipSelectPin/*=SD_CHIP_SELECT_PIN*/) { - if (!ready()) return false; +bool Sd2Card::ready() { + return state > DO_STARTUP; +} - if (!bulk.LUNIsGood(0)) { - SERIAL_ECHOLNPGM("LUN zero is not good"); - return false; - } +// Marlin calls this to initialize an SD card once it is inserted. +bool Sd2Card::init(const uint8_t, const pin_t) { + if (!isInserted()) return false; + #if USB_DEBUG >= 1 const uint32_t sectorSize = bulk.GetSectorSize(0); if (sectorSize != 512) { SERIAL_ECHOLNPAIR("Expecting sector size of 512. Got: ", sectorSize); return false; } + #endif - #ifdef USB_DEBUG + #if USB_DEBUG >= 3 lun0_capacity = bulk.GetCapacity(0); SERIAL_ECHOLNPAIR("LUN Capacity (in blocks): ", lun0_capacity); #endif @@ -123,8 +291,8 @@ bool Sd2Card::init(const uint8_t sckRateID/*=0*/, const pin_t chipSelectPin/*=SD // Returns the capacity of the card in blocks. uint32_t Sd2Card::cardSize() { - if (!ready()) return 0; - #ifndef USB_DEBUG + if (!isInserted()) return false; + #if USB_DEBUG < 3 const uint32_t #endif lun0_capacity = bulk.GetCapacity(0); @@ -132,13 +300,13 @@ uint32_t Sd2Card::cardSize() { } bool Sd2Card::readBlock(uint32_t block, uint8_t* dst) { - if (!ready()) return false; - #ifdef USB_DEBUG + if (!isInserted()) return false; + #if USB_DEBUG >= 3 if (block >= lun0_capacity) { SERIAL_ECHOLNPAIR("Attempt to read past end of LUN: ", block); return false; } - #if USB_DEBUG > 1 + #if USB_DEBUG >= 4 SERIAL_ECHOLNPAIR("Read block ", block); #endif #endif @@ -146,13 +314,13 @@ bool Sd2Card::readBlock(uint32_t block, uint8_t* dst) { } bool Sd2Card::writeBlock(uint32_t block, const uint8_t* src) { - if (!ready()) return false; - #ifdef USB_DEBUG + if (!isInserted()) return false; + #if USB_DEBUG >= 3 if (block >= lun0_capacity) { SERIAL_ECHOLNPAIR("Attempt to write past end of LUN: ", block); return false; } - #if USB_DEBUG > 1 + #if USB_DEBUG >= 4 SERIAL_ECHOLNPAIR("Write block ", block); #endif #endif diff --git a/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.h b/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.h index eafb85c3ad4b..5ab82d3af723 100644 --- a/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.h +++ b/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.h @@ -26,12 +26,6 @@ * \brief Sd2Card class for V2 SD/SDHC cards */ -/* Uncomment USB_DEBUG to enable debugging. - * 1 - basic debugging and bounds checking - * 2 - print each block access - */ -//#define USB_DEBUG 1 - #include "../SdFatConfig.h" #include "../SdInfo.h" @@ -52,24 +46,13 @@ class Sd2Card { private: - - typedef enum : uint8_t { - USB_HOST_UNINITIALIZED, - USB_HOST_INITIALIZED, - USB_HOST_DELAY_INIT, - USB_HOST_WAITING - } state_t; - - static state_t state; - uint32_t pos; - #ifdef USB_DEBUG - uint32_t lun0_capacity; - #endif - static inline bool ready() { return state == USB_HOST_INITIALIZED; } + static void usbStateDebug(); public: + static bool usbStartup(); + bool init(const uint8_t sckRateID=0, const pin_t chipSelectPin=SD_CHIP_SELECT_PIN); static void idle(); @@ -87,4 +70,5 @@ class Sd2Card { uint32_t cardSize(); static bool isInserted(); + static bool ready(); }; diff --git a/Marlin/src/sd/usb_flashdrive/SOURCES.txt b/Marlin/src/sd/usb_flashdrive/lib-uhs2/README.txt similarity index 74% rename from Marlin/src/sd/usb_flashdrive/SOURCES.txt rename to Marlin/src/sd/usb_flashdrive/lib-uhs2/README.txt index 66f170a203ac..5abcc8f2adfb 100644 --- a/Marlin/src/sd/usb_flashdrive/SOURCES.txt +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs2/README.txt @@ -1,15 +1,4 @@ -==== SUMMARY ==== - -Source Path: Repository: License: ------------- ----------- -------- -usb_flashdrive/lib github.com/felis/USB_Host_Shield_2.0 GPLv2 or later -usb_flashdrive/lib/masstorage.cpp [1] github.com/greiman/UsbFat MIT -usb_flashdrive/lib/settings.h [1] github.com/greiman/UsbFat MIT - -[1] Changes related to SKIP_WRITE_PROTECT and DELAY only - - ==== USB HOST SHIELD 2.0 LIBRARY ==== The lib/ folder contains a subset of the files from the USB Host Shield 2.0 @@ -26,6 +15,15 @@ files needed for Marlin as "GPLv2 or later", as documented in this thread. Small modifications have been made to the source. Please search for USB_FLASH_DRIVE_SUPPORT or look at the patch file to see what was changed. +==== LICENSE SUMMARY ==== + +Source Path: Repository: License: +------------ ----------- -------- +lib-uhs3/ github.com/felis/USB_Host_Shield_2.0 GPLv2 or later +lib-uhs3/lib/masstorage.cpp github.com/greiman/UsbFat [1] MIT +lib-uhs3/lib/settings.h github.com/greiman/UsbFat [1] MIT + +[1] Changes related to SKIP_WRITE_PROTECT and DELAY only ==== PERFORMANCE ENHANCEMENTS FOR USB DRIVES ==== diff --git a/Marlin/src/sd/usb_flashdrive/lib/Usb.cpp b/Marlin/src/sd/usb_flashdrive/lib-uhs2/Usb.cpp similarity index 99% rename from Marlin/src/sd/usb_flashdrive/lib/Usb.cpp rename to Marlin/src/sd/usb_flashdrive/lib-uhs2/Usb.cpp index b0a6d2943d6c..11d54b28447c 100644 --- a/Marlin/src/sd/usb_flashdrive/lib/Usb.cpp +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs2/Usb.cpp @@ -26,7 +26,7 @@ #include "../../../inc/MarlinConfigPre.h" -#if ENABLED(USB_FLASH_DRIVE_SUPPORT) +#if ENABLED(USB_FLASH_DRIVE_SUPPORT) && DISABLED(USE_UHS3_USB) #include "Usb.h" diff --git a/Marlin/src/sd/usb_flashdrive/lib/Usb.h b/Marlin/src/sd/usb_flashdrive/lib-uhs2/Usb.h similarity index 96% rename from Marlin/src/sd/usb_flashdrive/lib/Usb.h rename to Marlin/src/sd/usb_flashdrive/lib-uhs2/Usb.h index 5880f9de0015..195b26e940ca 100644 --- a/Marlin/src/sd/usb_flashdrive/lib/Usb.h +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs2/Usb.h @@ -45,8 +45,7 @@ #include "address.h" //#include "avrpins.h" #include "usb_ch9.h" -//#include "usbhost.h" -#include "../usb_host.h" +#include "usbhost.h" #include "UsbCore.h" #include "parsetools.h" #include "confdescparser.h" diff --git a/Marlin/src/sd/usb_flashdrive/lib/UsbCore.h b/Marlin/src/sd/usb_flashdrive/lib-uhs2/UsbCore.h similarity index 100% rename from Marlin/src/sd/usb_flashdrive/lib/UsbCore.h rename to Marlin/src/sd/usb_flashdrive/lib-uhs2/UsbCore.h diff --git a/Marlin/src/sd/usb_flashdrive/lib/address.h b/Marlin/src/sd/usb_flashdrive/lib-uhs2/address.h similarity index 100% rename from Marlin/src/sd/usb_flashdrive/lib/address.h rename to Marlin/src/sd/usb_flashdrive/lib-uhs2/address.h diff --git a/Marlin/src/sd/usb_flashdrive/lib/confdescparser.h b/Marlin/src/sd/usb_flashdrive/lib-uhs2/confdescparser.h similarity index 100% rename from Marlin/src/sd/usb_flashdrive/lib/confdescparser.h rename to Marlin/src/sd/usb_flashdrive/lib-uhs2/confdescparser.h diff --git a/Marlin/src/sd/usb_flashdrive/lib/hexdump.h b/Marlin/src/sd/usb_flashdrive/lib-uhs2/hexdump.h similarity index 100% rename from Marlin/src/sd/usb_flashdrive/lib/hexdump.h rename to Marlin/src/sd/usb_flashdrive/lib-uhs2/hexdump.h diff --git a/Marlin/src/sd/usb_flashdrive/lib/macros.h b/Marlin/src/sd/usb_flashdrive/lib-uhs2/macros.h similarity index 100% rename from Marlin/src/sd/usb_flashdrive/lib/macros.h rename to Marlin/src/sd/usb_flashdrive/lib-uhs2/macros.h diff --git a/Marlin/src/sd/usb_flashdrive/lib/masstorage.cpp b/Marlin/src/sd/usb_flashdrive/lib-uhs2/masstorage.cpp similarity index 99% rename from Marlin/src/sd/usb_flashdrive/lib/masstorage.cpp rename to Marlin/src/sd/usb_flashdrive/lib-uhs2/masstorage.cpp index 74a6187d56c7..5439423ee249 100644 --- a/Marlin/src/sd/usb_flashdrive/lib/masstorage.cpp +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs2/masstorage.cpp @@ -25,7 +25,7 @@ #include "../../../inc/MarlinConfigPre.h" -#if ENABLED(USB_FLASH_DRIVE_SUPPORT) +#if ENABLED(USB_FLASH_DRIVE_SUPPORT) && DISABLED(USE_UHS3_USB) #include "masstorage.h" @@ -762,7 +762,7 @@ uint8_t BulkOnly::Page3F(uint8_t lun) { buf[i] = 0x00; } WriteOk[lun] = true; - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) && defined(SKIP_WRITE_PROTECT) + #if defined(SKIP_WRITE_PROTECT) return 0; #endif uint8_t rc = ModeSense6(lun, 0, 0x3f, 0, 192, buf); diff --git a/Marlin/src/sd/usb_flashdrive/lib/masstorage.h b/Marlin/src/sd/usb_flashdrive/lib-uhs2/masstorage.h similarity index 100% rename from Marlin/src/sd/usb_flashdrive/lib/masstorage.h rename to Marlin/src/sd/usb_flashdrive/lib-uhs2/masstorage.h diff --git a/Marlin/src/sd/usb_flashdrive/lib/max3421e.h b/Marlin/src/sd/usb_flashdrive/lib-uhs2/max3421e.h similarity index 98% rename from Marlin/src/sd/usb_flashdrive/lib/max3421e.h rename to Marlin/src/sd/usb_flashdrive/lib-uhs2/max3421e.h index 35011f55f15d..39845fb730b2 100644 --- a/Marlin/src/sd/usb_flashdrive/lib/max3421e.h +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs2/max3421e.h @@ -191,6 +191,15 @@ #define bmSNDTOG1 0x80 #define rHXFR 0xf0 //30<<3 + +#undef tokSETUP +#undef tokIN +#undef tokOUT +#undef tokINHS +#undef tokOUTHS +#undef tokISOIN +#undef tokISOOUT + /* Host transfer token values for writing the HXFR register (R30) */ /* OR this bit field with the endpoint number in bits 3:0 */ #define tokSETUP 0x10 // HS=0, ISO=0, OUTNIN=0, SETUP=1 diff --git a/Marlin/src/sd/usb_flashdrive/lib/message.cpp b/Marlin/src/sd/usb_flashdrive/lib-uhs2/message.cpp similarity index 98% rename from Marlin/src/sd/usb_flashdrive/lib/message.cpp rename to Marlin/src/sd/usb_flashdrive/lib-uhs2/message.cpp index 3148afb5b983..8e2d40d3d3ac 100644 --- a/Marlin/src/sd/usb_flashdrive/lib/message.cpp +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs2/message.cpp @@ -25,7 +25,7 @@ #include "../../../inc/MarlinConfigPre.h" -#if ENABLED(USB_FLASH_DRIVE_SUPPORT) +#if ENABLED(USB_FLASH_DRIVE_SUPPORT) && DISABLED(USE_UHS3_USB) #include "Usb.h" diff --git a/Marlin/src/sd/usb_flashdrive/lib/message.h b/Marlin/src/sd/usb_flashdrive/lib-uhs2/message.h similarity index 100% rename from Marlin/src/sd/usb_flashdrive/lib/message.h rename to Marlin/src/sd/usb_flashdrive/lib-uhs2/message.h diff --git a/Marlin/src/sd/usb_flashdrive/lib/parsetools.cpp b/Marlin/src/sd/usb_flashdrive/lib-uhs2/parsetools.cpp similarity index 97% rename from Marlin/src/sd/usb_flashdrive/lib/parsetools.cpp rename to Marlin/src/sd/usb_flashdrive/lib-uhs2/parsetools.cpp index c03ce55cb31e..0c7061b77c30 100644 --- a/Marlin/src/sd/usb_flashdrive/lib/parsetools.cpp +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs2/parsetools.cpp @@ -25,7 +25,7 @@ #include "../../../inc/MarlinConfigPre.h" -#if ENABLED(USB_FLASH_DRIVE_SUPPORT) +#if ENABLED(USB_FLASH_DRIVE_SUPPORT) && DISABLED(USE_UHS3_USB) #include "Usb.h" diff --git a/Marlin/src/sd/usb_flashdrive/lib/parsetools.h b/Marlin/src/sd/usb_flashdrive/lib-uhs2/parsetools.h similarity index 100% rename from Marlin/src/sd/usb_flashdrive/lib/parsetools.h rename to Marlin/src/sd/usb_flashdrive/lib-uhs2/parsetools.h diff --git a/Marlin/src/sd/usb_flashdrive/lib/printhex.h b/Marlin/src/sd/usb_flashdrive/lib-uhs2/printhex.h similarity index 100% rename from Marlin/src/sd/usb_flashdrive/lib/printhex.h rename to Marlin/src/sd/usb_flashdrive/lib-uhs2/printhex.h diff --git a/Marlin/src/sd/usb_flashdrive/lib/settings.h b/Marlin/src/sd/usb_flashdrive/lib-uhs2/settings.h similarity index 100% rename from Marlin/src/sd/usb_flashdrive/lib/settings.h rename to Marlin/src/sd/usb_flashdrive/lib-uhs2/settings.h diff --git a/Marlin/src/sd/usb_flashdrive/lib/usb_ch9.h b/Marlin/src/sd/usb_flashdrive/lib-uhs2/usb_ch9.h similarity index 100% rename from Marlin/src/sd/usb_flashdrive/lib/usb_ch9.h rename to Marlin/src/sd/usb_flashdrive/lib-uhs2/usb_ch9.h diff --git a/Marlin/src/sd/usb_flashdrive/usb_host.cpp b/Marlin/src/sd/usb_flashdrive/lib-uhs2/usbhost.cpp similarity index 97% rename from Marlin/src/sd/usb_flashdrive/usb_host.cpp rename to Marlin/src/sd/usb_flashdrive/lib-uhs2/usbhost.cpp index 41895e86d740..e37da93ad2a5 100644 --- a/Marlin/src/sd/usb_flashdrive/usb_host.cpp +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs2/usbhost.cpp @@ -23,12 +23,12 @@ * lib/usbhost.c". This has been rewritten to use SPI routines from the * Marlin HAL */ -#include "../../inc/MarlinConfigPre.h" +#include "../../../inc/MarlinConfigPre.h" -#if ENABLED(USB_FLASH_DRIVE_SUPPORT) +#if ENABLED(USB_FLASH_DRIVE_SUPPORT) && DISABLED(USE_UHS3_USB) -#include "lib/Usb.h" -#include "usb_host.h" +#include "Usb.h" +#include "usbhost.h" uint8_t MAX3421e::vbusState = 0; diff --git a/Marlin/src/sd/usb_flashdrive/usb_host.h b/Marlin/src/sd/usb_flashdrive/lib-uhs2/usbhost.h similarity index 100% rename from Marlin/src/sd/usb_flashdrive/usb_host.h rename to Marlin/src/sd/usb_flashdrive/lib-uhs2/usbhost.h diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/README.txt b/Marlin/src/sd/usb_flashdrive/lib-uhs3/README.txt new file mode 100644 index 000000000000..710b3f20b584 --- /dev/null +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/README.txt @@ -0,0 +1,31 @@ +==== USB HOST SHIELD 3.0 LIBRARY ==== + +The lib-uhs3/ folder contains a subset of the files from the USB Host Shield +3.0 library: + + https://github.com/felis/UHS30 + + +==== LICENSE SUMMARY ==== + +Source Path: Repository: License: +------------ ----------- -------- +usb_flashdrive/lib github.com/felis/UHS30 GPLv2 or later + + +==== MARLIN INTEGRATION WORK ==== + +All additional work done to integrate USB into Marlin was performed by +AlephObjects, Inc. and is licensed under the GPLv3. + +This version of UHS3 has been modified for better compatibility with Marlin. +The upstream version of UHS 3.0 runs a frame timer interrupt every 1 ms to +handle device polling. This timer interrupt interferes with Marlin's stepper +IRQ, so the flag USB_HOST_MANUAL_POLL has been added to move the polling to +the idle task. Additional logic was added to disable and enable the frame +IRQ. + +SKIP_PAGE3F and USB_NO_TEST_UNIT_READY were added to work around bugs with +certain devices. + +-- marcio@alephobjects.com diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_BULK_STORAGE/UHS_BULK_STORAGE.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_BULK_STORAGE/UHS_BULK_STORAGE.h new file mode 100644 index 000000000000..54458d116e8c --- /dev/null +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_BULK_STORAGE/UHS_BULK_STORAGE.h @@ -0,0 +1,249 @@ +/* Copyright (C) 2015-2016 Andrew J. Kroll + and + Copyright (C) 2011 Circuits At Home, LTD. All rights reserved. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +Contact information +------------------- + +Circuits At Home, LTD +Web : http://www.circuitsathome.com +e-mail : support@circuitsathome.com + */ + +#if !defined(__UHS_BULK_STORAGE_H__) +#define __UHS_BULK_STORAGE_H__ + + +//////////////////////////////////////////////////////////////////////////////// +// Define any of these options at the top of your sketch to override +// the defaults contained herewith. Do NOT do modifications here. +// Macro | Settings and notes | Default +// -----------------------------------------+-----------------------+----------- +// | 1 to 8 | +// | Each LUN needs | +// MASS_MAX_SUPPORTED_LUN | ~13 bytes to be able | 8 +// | to track the state of | +// | each unit. | +// -----------------------------------------+-----------------------+----------- +// | Just define to use. | +// DEBUG_PRINTF_EXTRA_HUGE_UHS_BULK_STORAGE | works only if extra | +// | huge debug is on too. | +// -----------------------------------------^-----------------------^----------- + +#ifndef MASS_MAX_SUPPORTED_LUN +#define MASS_MAX_SUPPORTED_LUN 8 +#endif + +#include "UHS_SCSI.h" + +#define UHS_BULK_bmREQ_OUT USB_SETUP_HOST_TO_DEVICE|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_INTERFACE +#define UHS_BULK_bmREQ_IN USB_SETUP_DEVICE_TO_HOST|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_INTERFACE + +// Request Codes +#define UHS_BULK_REQ_ADSC 0x00U +#define UHS_BULK_REQ_GET 0xFCU +#define UHS_BULK_REQ_PUT 0xFDU +#define UHS_BULK_REQ_GET_MAX_LUN 0xFEU +#define UHS_BULK_REQ_BOMSR 0xFFU // Mass Storage Reset + +#define UHS_BULK_CBW_SIGNATURE 0x43425355LU +#define UHS_BULK_CSW_SIGNATURE 0x53425355LU + +#define UHS_BULK_CMD_DIR_OUT 0x00U +#define UHS_BULK_CMD_DIR_IN 0x80U + +/* Bulk error codes */ +#define UHS_BULK_ERR_SUCCESS UHS_HOST_ERROR_NONE +#define UHS_BULK_ERR_PHASE_ERROR 0x22U +#define UHS_BULK_ERR_UNIT_NOT_READY 0x23U +#define UHS_BULK_ERR_UNIT_BUSY 0x24U +#define UHS_BULK_ERR_STALL 0x25U +#define UHS_BULK_ERR_CMD_NOT_SUPPORTED 0x26U +#define UHS_BULK_ERR_INVALID_CSW 0x27U +#define UHS_BULK_ERR_NO_MEDIA 0x28U +#define UHS_BULK_ERR_BAD_LBA 0x29U +#define UHS_BULK_ERR_MEDIA_CHANGED 0x2AU +#define UHS_BULK_ERR_DEVICE_DISCONNECTED UHS_HOST_ERROR_UNPLUGGED +#define UHS_BULK_ERR_UNABLE_TO_RECOVER 0x32U // Reset recovery error +#define UHS_BULK_ERR_INVALID_LUN 0x33U +#define UHS_BULK_ERR_WRITE_STALL 0x34U +#define UHS_BULK_ERR_READ_NAKS 0x35U +#define UHS_BULK_ERR_WRITE_NAKS 0x36U +#define UHS_BULK_ERR_WRITE_PROTECTED 0x37U +#define UHS_BULK_ERR_NOT_IMPLEMENTED 0xFDU +#define UHS_BULK_ERR_GENERAL_SCSI_ERROR 0xF0U +#define UHS_BULK_ERR_GENERAL_USB_ERROR 0xFFU +#define UHS_BULK_ERR_USER 0xA0U // For subclasses to define their own error codes + +#define MASS_MAX_ENDPOINTS 3 + +struct UHS_BULK_CommandBlockWrapperBase { + volatile uint32_t dCBWSignature; + volatile uint32_t dCBWTag; + volatile uint32_t dCBWDataTransferLength; + volatile uint8_t bmCBWFlags; +public: + + UHS_BULK_CommandBlockWrapperBase(void) { + } + + UHS_BULK_CommandBlockWrapperBase(uint32_t tag, uint32_t xflen, uint8_t flgs) : + dCBWSignature(UHS_BULK_CBW_SIGNATURE), dCBWTag(tag), dCBWDataTransferLength(xflen), bmCBWFlags(flgs) { + } +} __attribute__((packed)); + +struct UHS_BULK_CommandBlockWrapper : public UHS_BULK_CommandBlockWrapperBase { + + struct { + uint8_t bmCBWLUN : 4; + uint8_t bmReserved1 : 4; + }; + + struct { + uint8_t bmCBWCBLength : 4; + uint8_t bmReserved2 : 4; + }; + + uint8_t CBWCB[16]; + +public: + // All zeroed. + + UHS_BULK_CommandBlockWrapper() : + UHS_BULK_CommandBlockWrapperBase(0, 0, 0), bmReserved1(0), bmReserved2(0) { + for(int i = 0; i < 16; i++) CBWCB[i] = 0; + } + + // Generic Wrap, CDB zeroed. + + UHS_BULK_CommandBlockWrapper(uint32_t tag, uint32_t xflen, uint8_t flgs, uint8_t lu, uint8_t cmdlen, uint8_t cmd) : + UHS_BULK_CommandBlockWrapperBase(tag, xflen, flgs), + bmCBWLUN(lu), bmReserved1(0), bmCBWCBLength(cmdlen), bmReserved2(0) { + for(int i = 0; i < 16; i++) CBWCB[i] = 0; + SCSI_CDB_BASE_t *x = reinterpret_cast(CBWCB); + x->LUN = cmd; + } + + // Wrap for CDB of 6 + + UHS_BULK_CommandBlockWrapper(uint32_t tag, uint32_t xflen, SCSI_CDB6_t *cdb, uint8_t dir) : + UHS_BULK_CommandBlockWrapperBase(tag, xflen, dir), + bmCBWLUN(cdb->LUN), bmReserved1(0), bmCBWCBLength(6), bmReserved2(0) { + memcpy(&CBWCB, cdb, 6); + } + // Wrap for CDB of 10 + + UHS_BULK_CommandBlockWrapper(uint32_t tag, uint32_t xflen, SCSI_CDB10_t *cdb, uint8_t dir) : + UHS_BULK_CommandBlockWrapperBase(tag, xflen, dir), + bmCBWLUN(cdb->LUN), bmReserved1(0), bmCBWCBLength(10), bmReserved2(0) { + memcpy(&CBWCB, cdb, 10); + } +} __attribute__((packed)); + +struct UHS_BULK_CommandStatusWrapper { + uint32_t dCSWSignature; + uint32_t dCSWTag; + uint32_t dCSWDataResidue; + uint8_t bCSWStatus; +} __attribute__((packed)); + +class UHS_Bulk_Storage : public UHS_USBInterface { +protected: + static const uint8_t epDataInIndex = 1; // DataIn endpoint index + static const uint8_t epDataOutIndex = 2; // DataOUT endpoint index + static const uint8_t epInterruptInIndex = 3; // InterruptIN endpoint index + + uint8_t bMaxLUN; // Max LUN + volatile uint32_t dCBWTag; // Tag + volatile uint8_t bTheLUN; // Active LUN + volatile uint32_t CurrentCapacity[MASS_MAX_SUPPORTED_LUN]; // Total sectors + volatile uint16_t CurrentSectorSize[MASS_MAX_SUPPORTED_LUN]; // Sector size, clipped to 16 bits + volatile bool LUNOk[MASS_MAX_SUPPORTED_LUN]; // use this to check for media changes. + volatile bool WriteOk[MASS_MAX_SUPPORTED_LUN]; + void PrintEndpointDescriptor(const USB_ENDPOINT_DESCRIPTOR* ep_ptr); + +public: + UHS_Bulk_Storage(UHS_USB_HOST_BASE *p); + + volatile UHS_EpInfo epInfo[MASS_MAX_ENDPOINTS]; + + uint8_t GetbMaxLUN(void) { + return bMaxLUN; // Max LUN + } + + uint8_t GetbTheLUN(void) { + return bTheLUN; // Active LUN + } + + bool WriteProtected(uint8_t lun); + uint8_t MediaCTL(uint8_t lun, uint8_t ctl); + uint8_t Read(uint8_t lun, uint32_t addr, uint16_t bsize, uint8_t blocks, uint8_t *buf); + uint8_t Write(uint8_t lun, uint32_t addr, uint16_t bsize, uint8_t blocks, const uint8_t *buf); + uint8_t LockMedia(uint8_t lun, uint8_t lock); + + bool LUNIsGood(uint8_t lun); + uint32_t GetCapacity(uint8_t lun); + uint16_t GetSectorSize(uint8_t lun); + uint8_t SCSITransaction6(SCSI_CDB6_t *cdb, uint16_t buf_size, void *buf, uint8_t dir); + uint8_t SCSITransaction10(SCSI_CDB10_t *cdb, uint16_t buf_size, void *buf, uint8_t dir); + + + // Configure and internal methods, these should never be called by a user's sketch. + uint8_t Start(void); + bool OKtoEnumerate(ENUMERATION_INFO *ei); + uint8_t SetInterface(ENUMERATION_INFO *ei); + + uint8_t GetAddress(void) { + return bAddress; + }; + + + void Poll(void); + + void DriverDefaults(void); + + +private: + void Reset(void); + void CheckMedia(void); + + bool IsValidCBW(uint8_t size, uint8_t *pcbw); + bool IsMeaningfulCBW(uint8_t size, uint8_t *pcbw); + bool IsValidCSW(UHS_BULK_CommandStatusWrapper *pcsw, UHS_BULK_CommandBlockWrapperBase *pcbw); + + bool CheckLUN(uint8_t lun); + + uint8_t Inquiry(uint8_t lun, uint16_t size, uint8_t *buf); + uint8_t TestUnitReady(uint8_t lun); + uint8_t RequestSense(uint8_t lun, uint16_t size, uint8_t *buf); + uint8_t ModeSense6(uint8_t lun, uint8_t pc, uint8_t page, uint8_t subpage, uint8_t len, uint8_t *buf); + uint8_t GetMaxLUN(uint8_t *max_lun); + uint8_t SetCurLUN(uint8_t lun); + uint8_t ResetRecovery(); + uint8_t ReadCapacity10(uint8_t lun, uint8_t *buf); + uint8_t Page3F(uint8_t lun); + uint8_t ClearEpHalt(uint8_t index); + uint8_t Transaction(UHS_BULK_CommandBlockWrapper *cbw, uint16_t bsize, void *buf); + uint8_t HandleUsbError(uint8_t error, uint8_t index); + uint8_t HandleSCSIError(uint8_t status); + +}; + +#if defined(LOAD_UHS_BULK_STORAGE) && !defined(UHS_BULK_STORAGE_LOADED) +#include "UHS_BULK_STORAGE_INLINE.h" +#endif +#endif // __MASSTORAGE_H__ diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_BULK_STORAGE/UHS_BULK_STORAGE_INLINE.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_BULK_STORAGE/UHS_BULK_STORAGE_INLINE.h new file mode 100644 index 000000000000..5cf45ce53ccf --- /dev/null +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_BULK_STORAGE/UHS_BULK_STORAGE_INLINE.h @@ -0,0 +1,1210 @@ +/* Copyright (C) 2015-2016 Andrew J. Kroll + and +Copyright (C) 2011 Circuits At Home, LTD. All rights reserved. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +Contact information +------------------- + +Circuits At Home, LTD +Web : http://www.circuitsathome.com +e-mail : support@circuitsathome.com + */ + +#if defined(LOAD_UHS_BULK_STORAGE) && defined(__UHS_BULK_STORAGE_H__) && !defined(UHS_BULK_STORAGE_LOADED) +#define UHS_BULK_STORAGE_LOADED + +// uncomment to get 'printf' console debugging. NOT FOR UNO! +//#define DEBUG_PRINTF_EXTRA_HUGE_UHS_BULK_STORAGE + +#if DEBUG_PRINTF_EXTRA_HUGE +#ifdef DEBUG_PRINTF_EXTRA_HUGE_UHS_BULK_STORAGE +#define BS_HOST_DEBUG(...) printf(__VA_ARGS__) +#else +#define BS_HOST_DEBUG(...) VOID0 +#endif +#else +#define BS_HOST_DEBUG(...) VOID0 +#endif + +//////////////////////////////////////////////////////////////////////////////// + +// Interface code + +//////////////////////////////////////////////////////////////////////////////// + +/** + * Get the capacity of the media + * + * @param lun Logical Unit Number + * @return media capacity + */ +uint32_t UHS_NI UHS_Bulk_Storage::GetCapacity(uint8_t lun) { + uint32_t v = 0LU; + pUsb->DisablePoll(); + if(LUNOk[lun]) + v = CurrentCapacity[lun]; + pUsb->EnablePoll(); + return v; +} + +/** + * Get the sector (block) size used on the media + * + * @param lun Logical Unit Number + * @return media sector size + */ +uint16_t UHS_NI UHS_Bulk_Storage::GetSectorSize(uint8_t lun) { + uint16_t v = 0U; + pUsb->DisablePoll(); + if(LUNOk[lun]) + v = CurrentSectorSize[lun]; + pUsb->EnablePoll(); + return v; +} + +/** + * Test if LUN is ready for use + * + * @param lun Logical Unit Number + * @return true if LUN is ready for use + */ +bool UHS_NI UHS_Bulk_Storage::LUNIsGood(uint8_t lun) { + bool v; + pUsb->DisablePoll(); + v = LUNOk[lun]; + pUsb->EnablePoll(); + return v; +} + +/** + * Test if LUN is write protected + * + * @param lun Logical Unit Number + * @return cached status of write protect switch + */ +bool UHS_NI UHS_Bulk_Storage::WriteProtected(uint8_t lun) { + bool v; + pUsb->DisablePoll(); + v = WriteOk[lun]; + pUsb->EnablePoll(); + return v; +} + +/** + * Wrap and execute a SCSI CDB with length of 6 + * + * @param cdb CDB to execute + * @param buf_size Size of expected transaction + * @param buf Buffer + * @param dir MASS_CMD_DIR_IN | MASS_CMD_DIR_OUT + * @return + */ +uint8_t UHS_NI UHS_Bulk_Storage::SCSITransaction6(SCSI_CDB6_t *cdb, uint16_t buf_size, void *buf, uint8_t dir) { + if(!bAddress) return UHS_BULK_ERR_DEVICE_DISCONNECTED; + pUsb->DisablePoll(); + // promote buf_size to 32bits. + UHS_BULK_CommandBlockWrapper cbw = UHS_BULK_CommandBlockWrapper(++dCBWTag, (uint32_t)buf_size, cdb, dir); + +#if 0 + // Lets check the CBW here: + printf("\r\n"); + printf("\r\n"); + uint8_t *dump = (uint8_t*)(&cbw); + + for(int i=0; i<(sizeof (UHS_BULK_CommandBlockWrapper)); i++) { + printf("%02.2x ", *dump); + dump++; + } + printf("\r\n"); + printf("\r\n"); +#endif + + uint8_t v = (HandleSCSIError(Transaction(&cbw, buf_size, buf))); + pUsb->EnablePoll(); + return v; +} + +/** + * Wrap and execute a SCSI CDB with length of 10 + * + * @param cdb CDB to execute + * @param buf_size Size of expected transaction + * @param buf Buffer + * @param dir MASS_CMD_DIR_IN | MASS_CMD_DIR_OUT + * @return + */ +uint8_t UHS_NI UHS_Bulk_Storage::SCSITransaction10(SCSI_CDB10_t *cdb, uint16_t buf_size, void *buf, uint8_t dir) { + if(!bAddress) return UHS_BULK_ERR_DEVICE_DISCONNECTED; + pUsb->DisablePoll(); + // promote buf_size to 32bits. + UHS_BULK_CommandBlockWrapper cbw = UHS_BULK_CommandBlockWrapper(++dCBWTag, (uint32_t)buf_size, cdb, dir); + //SetCurLUN(cdb->LUN); + uint8_t v = (HandleSCSIError(Transaction(&cbw, buf_size, buf))); + pUsb->EnablePoll(); + return v; +} + +/** + * Lock or Unlock the tray or door on device. + * Caution: Some devices with buggy firmware will lock up. + * + * @param lun Logical Unit Number + * @param lock 1 to lock, 0 to unlock + * @return + */ +uint8_t UHS_NI UHS_Bulk_Storage::LockMedia(uint8_t lun, uint8_t lock) { + if(!bAddress) return UHS_BULK_ERR_DEVICE_DISCONNECTED; + pUsb->DisablePoll(); + Notify(PSTR("\r\nLockMedia\r\n"), 0x80); + Notify(PSTR("---------\r\n"), 0x80); + + SCSI_CDB6_t cdb = SCSI_CDB6_t(SCSI_CMD_PREVENT_REMOVAL, lun, (uint8_t)0, lock); + + uint8_t v = SCSITransaction6(&cdb, (uint16_t)0, NULL, (uint8_t)UHS_BULK_CMD_DIR_IN); + pUsb->EnablePoll(); + return v; +} + +/** + * Media control, for spindle motor and media tray or door. + * This includes CDROM, TAPE and anything with a media loader. + * + * @param lun Logical Unit Number + * @param ctl 0x00 Stop Motor, 0x01 Start Motor, 0x02 Eject Media, 0x03 Load Media + * @return 0 on success + */ +uint8_t UHS_NI UHS_Bulk_Storage::MediaCTL(uint8_t lun, uint8_t ctl) { + if(!bAddress) return UHS_BULK_ERR_DEVICE_DISCONNECTED; + pUsb->DisablePoll(); + Notify(PSTR("\r\nMediaCTL\r\n"), 0x80); + Notify(PSTR("-----------------\r\n"), 0x80); + + uint8_t rcode = UHS_BULK_ERR_UNIT_NOT_READY; + if(bAddress) { + SCSI_CDB6_t cdb = SCSI_CDB6_t(SCSI_CMD_START_STOP_UNIT, lun, ctl & 0x03, 0); + rcode = SCSITransaction6(&cdb, (uint16_t)0, NULL, (uint8_t)UHS_BULK_CMD_DIR_OUT); + } else { + SetCurLUN(lun); + } + pUsb->EnablePoll(); + return rcode; +} + +/** + * Read data from media + * + * @param lun Logical Unit Number + * @param addr LBA address on media to read + * @param bsize size of a block (we should probably use the cached size) + * @param blocks how many blocks to read + * @param buf memory that is able to hold the requested data + * @return 0 on success + */ +uint8_t UHS_NI UHS_Bulk_Storage::Read(uint8_t lun, uint32_t addr, uint16_t bsize, uint8_t blocks, uint8_t *buf) { + if(!bAddress) return UHS_BULK_ERR_NO_MEDIA; + uint8_t er = UHS_BULK_ERR_NO_MEDIA; + pUsb->DisablePoll(); + if(LUNOk[lun]) { + Notify(PSTR("\r\nRead LUN:\t"), 0x80); + D_PrintHex (lun, 0x90); + Notify(PSTR("\r\nLBA:\t\t"), 0x90); + D_PrintHex (addr, 0x90); + Notify(PSTR("\r\nblocks:\t\t"), 0x90); + D_PrintHex (blocks, 0x90); + Notify(PSTR("\r\nblock size:\t"), 0x90); + D_PrintHex (bsize, 0x90); + Notify(PSTR("\r\n---------\r\n"), 0x80); + SCSI_CDB10_t cdb = SCSI_CDB10_t(SCSI_CMD_READ_10, lun, blocks, addr); + +again: + er = SCSITransaction10(&cdb, ((uint16_t)bsize * blocks), buf, (uint8_t)UHS_BULK_CMD_DIR_IN); + + if(er == UHS_BULK_ERR_STALL) { + MediaCTL(lun, 1); + + if(UHS_SLEEP_MS(150)) { + if(!TestUnitReady(lun)) goto again; + } + } + } + qNextPollTime = millis() + 100; + pUsb->EnablePoll(); + + return er; +} + +/** + * Write data to media + * + * @param lun Logical Unit Number + * @param addr LBA address on media to write + * @param bsize size of a block (we should probably use the cached size) + * @param blocks how many blocks to write + * @param buf memory that contains the data to write + * @return 0 on success + */ +uint8_t UHS_NI UHS_Bulk_Storage::Write(uint8_t lun, uint32_t addr, uint16_t bsize, uint8_t blocks, const uint8_t * buf) { + if(!bAddress) return UHS_BULK_ERR_NO_MEDIA; + uint8_t er = UHS_BULK_ERR_NO_MEDIA; + pUsb->DisablePoll(); + if(LUNOk[lun]) { + if(!WriteOk[lun]) { + er = UHS_BULK_ERR_WRITE_PROTECTED; + } else { + Notify(PSTR("\r\nWrite LUN:\t"), 0x80); + D_PrintHex (lun, 0x90); + Notify(PSTR("\r\nLBA:\t\t"), 0x90); + D_PrintHex (addr, 0x90); + Notify(PSTR("\r\nblocks:\t\t"), 0x90); + D_PrintHex (blocks, 0x90); + Notify(PSTR("\r\nblock size:\t"), 0x90); + D_PrintHex (bsize, 0x90); + Notify(PSTR("\r\n---------\r\n"), 0x80); + SCSI_CDB10_t cdb = SCSI_CDB10_t(SCSI_CMD_WRITE_10, lun, blocks, addr); + +again: + er = SCSITransaction10(&cdb, ((uint16_t)bsize * blocks), (void*)buf, (uint8_t)UHS_BULK_CMD_DIR_OUT); + + if(er == UHS_BULK_ERR_WRITE_STALL) { + MediaCTL(lun, 1); + + if(UHS_SLEEP_MS(150)) { + if(!TestUnitReady(lun)) goto again; + } + } + } + } + qNextPollTime = millis() + 100; + pUsb->EnablePoll(); + + return er; +} + +// End of user functions, the remaining code below is driver internals. +// Only developer serviceable parts below! + +//////////////////////////////////////////////////////////////////////////////// + +// Main driver code + +//////////////////////////////////////////////////////////////////////////////// + +UHS_NI UHS_Bulk_Storage::UHS_Bulk_Storage(UHS_USB_HOST_BASE *p) { + pUsb = p; + dCBWTag = 0; + if(pUsb) { + + DriverDefaults(); + pUsb->RegisterDeviceClass(this); + // Serial.print("Bulk Register to USB Host @ 0x"); + // Serial.println((uint32_t)pUsb, HEX); + // Serial.print("Bulk Register to USB Host Address Pool @ 0x"); + // Serial.println((uint32_t)pUsb->GetAddressPool(), HEX); + } +} + +/** + * + * @param ei Enumeration information + * @return true if this interface driver can handle this interface description + */ +bool UHS_NI UHS_Bulk_Storage::OKtoEnumerate(ENUMERATION_INFO *ei) { + BS_HOST_DEBUG("BulkOnly: checking numep %i, klass %2.2x, subklass %2.2x\r\n", ei->interface.numep, ei->klass, ei->subklass); + BS_HOST_DEBUG("BulkOnly: checking protocol %2.2x, interface.klass %2.2x, interface.subklass %2.2x\r\n", ei->protocol, ei->interface.klass, ei->interface.subklass); + BS_HOST_DEBUG("BulkOnly: checking interface.protocol %2.2x\r\n", ei->interface.protocol); + // + // TO-DO? + // Check that we have 2 bulk endpoints, and one in each direction?? + // e.g. (ei->interface.numep > 1) && // two or more endpoints AND check types + // This will work with proper hardware though. + // + + return ( + ((ei->klass == UHS_USB_CLASS_MASS_STORAGE) || (ei->interface.klass == UHS_USB_CLASS_MASS_STORAGE)) && // mass storage class AND + ((ei->subklass == UHS_BULK_SUBCLASS_SCSI) || (ei->interface.subklass == UHS_BULK_SUBCLASS_SCSI)) && // SCSI command set AND + ((ei->protocol == UHS_STOR_PROTO_BBB) || (ei->interface.protocol == UHS_STOR_PROTO_BBB)) // Bulk Only transport + ); +} + +/** + * @param ei Enumeration information + * @return 0 always + */ +uint8_t UHS_NI UHS_Bulk_Storage::SetInterface(ENUMERATION_INFO *ei) { + uint8_t index; + + bAddress = ei->address; + BS_HOST_DEBUG("BS SetInterface\r\n"); + // Fill in the endpoint info structure + for(uint8_t ep = 0; ep < ei->interface.numep; ep++) { + BS_HOST_DEBUG("ep: 0x%2.2x bmAttributes: 0x%2.2x ", ep, ei->interface.epInfo[ep].bmAttributes); + if(ei->interface.epInfo[ep].bmAttributes == USB_TRANSFER_TYPE_BULK) { + index = ((ei->interface.epInfo[ep].bEndpointAddress & USB_TRANSFER_DIRECTION_IN) == USB_TRANSFER_DIRECTION_IN) ? epDataInIndex : epDataOutIndex; + epInfo[index].epAddr = (ei->interface.epInfo[ep].bEndpointAddress & 0x0F); + epInfo[index].maxPktSize = ei->interface.epInfo[ep].wMaxPacketSize; + epInfo[index].epAttribs = 0; + epInfo[index].bmNakPower = UHS_USB_NAK_MAX_POWER; + epInfo[index].bmSndToggle = 0; + epInfo[index].bmRcvToggle = 0; + epInfo[index].bIface=ei->interface.bInterfaceNumber; + BS_HOST_DEBUG("index: %i\r\n", index); + } + BS_HOST_DEBUG("\r\n"); + } + bNumEP = 3; + epInfo[0].epAddr = 0; + epInfo[0].maxPktSize = ei->bMaxPacketSize0; + epInfo[0].bmNakPower = UHS_USB_NAK_MAX_POWER; + bIface = ei->interface.bInterfaceNumber; + + return 0; +}; + +/** + * + * @return 0 for success + */ +uint8_t UHS_NI UHS_Bulk_Storage::Start(void) { + uint8_t rcode; + // Serial.print("Bulk Start from USB Host @ 0x"); + // Serial.println((uint32_t)pUsb, HEX); + // Serial.print("Bulk Start USB Host Address Pool @ 0x"); + // Serial.println((uint32_t)pUsb->GetAddressPool(), HEX); + + BS_HOST_DEBUG("BS Start, speed: %i\r\n", pUsb->GetAddressPool()->GetUsbDevicePtr(bAddress)->speed); + BS_HOST_DEBUG("BS Start\r\n"); + rcode = pUsb->setEpInfoEntry(bAddress, bIface, 3, epInfo); + // Serial.println(rcode,HEX); + if(rcode) goto FailOnInit; + + // Do a 1 second delay before LUN query + if(!UHS_SLEEP_MS(1000)) goto FailUnPlug; + + rcode = GetMaxLUN(&bMaxLUN); + BS_HOST_DEBUG("GetMaxLUN 0x%2.2x\r\n", rcode); + if(rcode) { + goto FailGetMaxLUN; + } + if(bMaxLUN >= MASS_MAX_SUPPORTED_LUN) bMaxLUN = MASS_MAX_SUPPORTED_LUN - 1; + BS_HOST_DEBUG("MaxLUN %u\r\n", bMaxLUN); + //ErrorMessage (PSTR("MaxLUN"), bMaxLUN); + if(!UHS_SLEEP_MS(150)) goto FailUnPlug; // Delay a bit for slow firmware. (again) + + for(uint8_t lun = 0; lun <= bMaxLUN; lun++) { + if(!UHS_SLEEP_MS(3)) goto FailUnPlug; + SCSI_Inquiry_Response response; + rcode = Inquiry(lun, sizeof (SCSI_Inquiry_Response), (uint8_t*) & response); + BS_HOST_DEBUG("Inquiry 0x%2.2x 0x%2.2x\r\n", sizeof (SCSI_Inquiry_Response), rcode); + if(rcode) { + goto FailInquiry; +#if 0 + } else { + BS_HOST_DEBUG("LUN %i `", lun); + uint8_t *buf = response.VendorID; + for(int i = 0; i < 28; i++) BS_HOST_DEBUG("%c", buf[i]); + BS_HOST_DEBUG("'\r\nQualifier %1.1X ", response.PeripheralQualifier); + BS_HOST_DEBUG("Device type %2.2X ", response.DeviceType); + BS_HOST_DEBUG("RMB %1.1X ", response.Removable); + BS_HOST_DEBUG("SSCS %1.1X ", response.SCCS); + uint8_t sv = response.Version; + BS_HOST_DEBUG("SCSI version %2.2X\r\nDevice conforms to ", sv); + switch(sv) { + case 0: + BS_HOST_DEBUG("No specific"); + break; + case 1: + BS_HOST_DEBUG("ANSI X3.131-1986 (ANSI 1)"); + break; + case 2: + BS_HOST_DEBUG("ANSI X3.131-1994 (ANSI 2)"); + break; + case 3: + BS_HOST_DEBUG("ANSI INCITS 301-1997 (SPC)"); + break; + case 4: + BS_HOST_DEBUG("ANSI INCITS 351-2001 (SPC-2)"); + break; + case 5: + BS_HOST_DEBUG("ANSI INCITS 408-2005 (SPC-4)"); + break; + case 6: + BS_HOST_DEBUG("T10/1731-D (SPC-4)"); + break; + default: + BS_HOST_DEBUG("unknown"); + } + BS_HOST_DEBUG(" standards.\r\n"); +#endif + } + } + + for(uint8_t lun = 0; lun <= bMaxLUN; lun++) { + if(!UHS_SLEEP_MS(3)) goto FailUnPlug; + #ifndef USB_NO_TEST_UNIT_READY + uint8_t tries = 0xf0; + while((rcode = TestUnitReady(lun))) { + BS_HOST_DEBUG("\r\nTry %2.2x TestUnitReady %2.2x\r\n", tries - 0xf0, rcode); + if(rcode == 0x08) break; // break on no media, this is OK to do. + if(rcode == UHS_BULK_ERR_DEVICE_DISCONNECTED) goto FailUnPlug; + if(rcode == UHS_BULK_ERR_INVALID_CSW) goto Fail; + if(rcode != UHS_BULK_ERR_MEDIA_CHANGED) goto Fail; + if(!UHS_SLEEP_MS(2 * (tries + 1))) goto FailUnPlug; + tries++; + if(!tries) break; + } + #else + // Don't wait for the LUN to become ready, as this will + // trigger Marlin's watchdog timer + rcode = -1; + #endif + if(!UHS_SLEEP_MS(3)) goto FailUnPlug; + LockMedia(lun, 1); + if(rcode == 0x08) { + if(!UHS_SLEEP_MS(3)) goto FailUnPlug; + if(MediaCTL(lun, 1) == UHS_BULK_ERR_DEVICE_DISCONNECTED) goto FailUnPlug; // I actually have a USB stick that needs this! + } + BS_HOST_DEBUG("\r\nTry %2.2x TestUnitReady %2.2x\r\n", tries - 0xf0, rcode); + if(!rcode) { + if(!UHS_SLEEP_MS(3)) goto FailUnPlug; + BS_HOST_DEBUG("CheckLUN...\r\n"); + BS_HOST_DEBUG("%lu\r\n", millis()/1000); + // Stalls on ***some*** devices, ***WHY***?! Device SAID it is READY!! + LUNOk[lun] = CheckLUN(lun); + BS_HOST_DEBUG("%lu\r\n", millis()/1000); + if(!LUNOk[lun]) LUNOk[lun] = CheckLUN(lun); + if(!UHS_SLEEP_MS(1)) goto FailUnPlug; + BS_HOST_DEBUG("Checked LUN...\r\n"); + } else { + LUNOk[lun] = false; + } + } + + rcode = OnStart(); + + if(rcode) goto FailOnInit; + +#ifdef DEBUG_USB_HOST + USBTRACE("BS configured\r\n\r\n"); +#endif + qNextPollTime = millis() + 100; + bPollEnable = true; + + return 0; +FailUnPlug: + rcode = UHS_BULK_ERR_DEVICE_DISCONNECTED; + goto Fail; + +FailOnInit: +#ifdef DEBUG_USB_HOST + USBTRACE("OnStart:"); + goto Fail; +#endif + +FailGetMaxLUN: +#ifdef DEBUG_USB_HOST + USBTRACE("GetMaxLUN:"); + goto Fail; +#endif + +FailInquiry: +#ifdef DEBUG_USB_HOST + USBTRACE("Inquiry:"); +#endif + +Fail: +#ifdef DEBUG_USB_HOST + NotifyFail(rcode); +#endif + Release(); + + return rcode; +} + +// Base class definition of Release() used. See UHS_USBInterface class definition for details + +/** + * For driver use only. + * + * @return + */ +//void UHS_NI UHS_Bulk_Storage::Release(void) { +// pUsb->DisablePoll(); +// OnRelease(); +// DriverDefaults(); +// pUsb->EnablePoll(); +// return; +//} + +/** + * For driver use only. + * + * @param lun Logical Unit Number + * @return true if LUN is ready for use. + */ +bool UHS_NI UHS_Bulk_Storage::CheckLUN(uint8_t lun) { + uint8_t rcode; + SCSI_Capacity capacity; + for(uint8_t i = 0; i < 8; i++) capacity.data[i] = 0; + + rcode = ReadCapacity10(lun, (uint8_t*)capacity.data); + if(rcode) { + BS_HOST_DEBUG(">>>>>>>>>>>>>>>>ReadCapacity returned %i\r\n", rcode); + return false; + } +#ifdef DEBUG_USB_HOST + ErrorMessage (PSTR(">>>>>>>>>>>>>>>>CAPACITY OK ON LUN"), lun); + for(uint8_t i = 0; i < 8 /*sizeof (Capacity)*/; i++) + D_PrintHex (capacity.data[i], 0x80); + Notify(PSTR("\r\n\r\n"), 0x80); +#endif + // Only 512/1024/2048/4096 are valid values! + uint32_t c = UHS_BYTES_TO_UINT32(capacity.data[4], capacity.data[5], capacity.data[6], capacity.data[7]); + if(c != 0x0200LU && c != 0x0400LU && c != 0x0800LU && c != 0x1000LU) { + return false; + } + // Store capacity information. + CurrentSectorSize[lun] = (uint16_t)(c); // & 0xFFFF); + + CurrentCapacity[lun] = UHS_BYTES_TO_UINT32(capacity.data[0], capacity.data[1], capacity.data[2], capacity.data[3]) + 1; + if(CurrentCapacity[lun] == /*0xffffffffLU */ 0x01LU || CurrentCapacity[lun] == 0x00LU) { + // Buggy firmware will report 0xffffffff or 0 for no media +#ifdef DEBUG_USB_HOST + if(CurrentCapacity[lun]) + ErrorMessage (PSTR(">>>>>>>>>>>>>>>>BUGGY FIRMWARE. CAPACITY FAIL ON LUN"), lun); +#endif + return false; + } + if(!UHS_SLEEP_MS(20)) return false; + #ifndef SKIP_PAGE3F + Page3F(lun); + #endif + if(!TestUnitReady(lun)) return true; + + return false; +} + +/** + * For driver use only. + * + * Scan for media change on all LUNs + */ +void UHS_NI UHS_Bulk_Storage::CheckMedia(void) { + if(!bAddress) return; + for(uint8_t lun = 0; lun <= bMaxLUN; lun++) { + if(TestUnitReady(lun)) { + LUNOk[lun] = false; + continue; + } + if(!LUNOk[lun]) + LUNOk[lun] = CheckLUN(lun); + } +#if 0 + BS_HOST_DEBUG("}}}}}}}}}}}}}}}}STATUS "); + for(uint8_t lun = 0; lun <= bMaxLUN; lun++) { + if(LUNOk[lun]) + BS_HOST_DEBUG("#"); + + else BS_HOST_DEBUG("."); + } + BS_HOST_DEBUG("\r\n"); +#endif + OnPoll(); + qNextPollTime = millis() + 100; +} + +/** + * For driver use only. + * + */ +void UHS_NI UHS_Bulk_Storage::Poll(void) { + if((long)(millis() - qNextPollTime) >= 0L) { + + CheckMedia(); + } + + return; +} + +//////////////////////////////////////////////////////////////////////////////// + + +// SCSI code + + +//////////////////////////////////////////////////////////////////////////////// + +/** + * For driver use only. + * + * @param plun + * @return + */ +uint8_t UHS_NI UHS_Bulk_Storage::GetMaxLUN(uint8_t *plun) { + if(!bAddress) return UHS_BULK_ERR_DEVICE_DISCONNECTED; + uint8_t ret = pUsb->ctrlReq(bAddress, mkSETUP_PKT16(UHS_BULK_bmREQ_IN, UHS_BULK_REQ_GET_MAX_LUN, 0x0000U, bIface, 1), 1, plun); + + if(ret == UHS_HOST_ERROR_STALL) { + + *plun = 0; + Notify(PSTR("\r\nGetMaxLUN Stalled\r\n"), 0x80); + } + return 0; +} + +/** + * For driver use only. Used during Driver Start + * + * @param lun Logical Unit Number + * @param bsize + * @param buf + * @return + */ +uint8_t UHS_NI UHS_Bulk_Storage::Inquiry(uint8_t lun, uint16_t bsize, uint8_t *buf) { + if(!bAddress) return UHS_BULK_ERR_DEVICE_DISCONNECTED; + Notify(PSTR("\r\nInquiry\r\n"), 0x80); + Notify(PSTR("---------\r\n"), 0x80); + + SCSI_CDB6_t cdb = SCSI_CDB6_t(SCSI_CMD_INQUIRY, lun, 0LU, (uint8_t)bsize, 0); + uint8_t rc = SCSITransaction6(&cdb, bsize, buf, (uint8_t)UHS_BULK_CMD_DIR_IN); + + return rc; +} + +/** + * For driver use only. + * + * @param lun Logical Unit Number + * @return + */ +uint8_t UHS_NI UHS_Bulk_Storage::TestUnitReady(uint8_t lun) { + if(!bAddress) return UHS_BULK_ERR_DEVICE_DISCONNECTED; + //SetCurLUN(lun); + if(!bAddress) + return UHS_BULK_ERR_UNIT_NOT_READY; + + Notify(PSTR("\r\nTestUnitReady\r\n"), 0x80); + Notify(PSTR("-----------------\r\n"), 0x80); + + SCSI_CDB6_t cdb = SCSI_CDB6_t(SCSI_CMD_TEST_UNIT_READY, lun, (uint8_t)0, 0); + + return SCSITransaction6(&cdb, 0, NULL, (uint8_t)UHS_BULK_CMD_DIR_IN); + +} + +/** + * For driver use only. + * + * @param lun Logical Unit Number + * @param pc + * @param page + * @param subpage + * @param len + * @param pbuf + * @return + */ +uint8_t UHS_NI UHS_Bulk_Storage::ModeSense6(uint8_t lun, uint8_t pc, uint8_t page, uint8_t subpage, uint8_t len, uint8_t * pbuf) { + if(!bAddress) return UHS_BULK_ERR_DEVICE_DISCONNECTED; + Notify(PSTR("\r\rModeSense\r\n"), 0x80); + Notify(PSTR("------------\r\n"), 0x80); + + SCSI_CDB6_t cdb = SCSI_CDB6_t(SCSI_CMD_MODE_SENSE_6, lun, (uint32_t)((((pc << 6) | page) << 8) | subpage), len, 0); + + return SCSITransaction6(&cdb, len, pbuf, (uint8_t)UHS_BULK_CMD_DIR_IN); +} + +/** + * For driver use only. + * + * @param lun Logical Unit Number + * @param bsize + * @param buf + * @return + */ +uint8_t UHS_NI UHS_Bulk_Storage::ReadCapacity10(uint8_t lun, uint8_t *buf) { + if(!bAddress) return UHS_BULK_ERR_DEVICE_DISCONNECTED; + Notify(PSTR("\r\nReadCapacity\r\n"), 0x80); + Notify(PSTR("---------------\r\n"), 0x80); + + SCSI_CDB10_t cdb = SCSI_CDB10_t(SCSI_CMD_READ_CAPACITY_10, lun); + + return SCSITransaction10(&cdb, 8, buf, (uint8_t)UHS_BULK_CMD_DIR_IN); +} + +/** + * For driver use only. + * + * Page 3F contains write protect status. + * + * @param lun Logical Unit Number to test. + * @return Write protect switch status. + */ +uint8_t UHS_NI UHS_Bulk_Storage::Page3F(uint8_t lun) { + if(!bAddress) return UHS_BULK_ERR_DEVICE_DISCONNECTED; + uint8_t buf[192]; + for(int i = 0; i < 192; i++) { + buf[i] = 0x00; + } + WriteOk[lun] = true; + uint8_t rc = ModeSense6(lun, 0, 0x3f, 0, 192, buf); + if(!rc) { + WriteOk[lun] = ((buf[2] & 0x80) == 0); +#ifdef DEBUG_USB_HOST + Notify(PSTR("Mode Sense: "), 0x80); + for(int i = 0; i < 4; i++) { + + D_PrintHex (buf[i], 0x80); + Notify(PSTR(" "), 0x80); + } + Notify(PSTR("\r\n"), 0x80); +#endif + } + return rc; +} + +/** + * For driver use only. + * + * @param lun Logical Unit Number + * @param size + * @param buf + * @return + */ +uint8_t UHS_NI UHS_Bulk_Storage::RequestSense(uint8_t lun, uint16_t size, uint8_t *buf) { + if(!bAddress) return UHS_BULK_ERR_DEVICE_DISCONNECTED; + pUsb->DisablePoll(); + Notify(PSTR("\r\nRequestSense\r\n"), 0x80); + Notify(PSTR("----------------\r\n"), 0x80); + + SCSI_CDB6_t cdb = SCSI_CDB6_t(SCSI_CMD_REQUEST_SENSE, lun, 0LU, (uint8_t)size, 0); + UHS_BULK_CommandBlockWrapper cbw = UHS_BULK_CommandBlockWrapper(++dCBWTag, (uint32_t)size, &cdb, (uint8_t)UHS_BULK_CMD_DIR_IN); + uint8_t v = Transaction(&cbw, size, buf); + pUsb->EnablePoll(); + + return v; +} + + +//////////////////////////////////////////////////////////////////////////////// + + +// USB code + + +//////////////////////////////////////////////////////////////////////////////// + +/** + * For driver use only. + * + * @param index + * @return + */ +uint8_t UHS_NI UHS_Bulk_Storage::ClearEpHalt(uint8_t index) { + if(!bAddress) return UHS_BULK_ERR_DEVICE_DISCONNECTED; + uint8_t ret = 0; + if(index != 0) { + uint8_t ep = (index == epDataInIndex) ? (0x80 | epInfo[index].epAddr) : epInfo[index].epAddr; + do { + ret = pUsb->EPClearHalt(bAddress, ep); + if(!UHS_SLEEP_MS(6)) break; + } while(ret == 0x01); + + if(ret) { + ErrorMessage (PSTR("ClearEpHalt"), ret); + ErrorMessage (PSTR("EP"), ep); + epInfo[index].bmSndToggle = 0; + epInfo[index].bmRcvToggle = 0; + return ret; + } else { + + epInfo[index].bmSndToggle = 0; + epInfo[index].bmRcvToggle = 0; + } + } + return ret; +} + +/** + * For driver use only. + * + */ +void UHS_NI UHS_Bulk_Storage::Reset(void) { + if(!bAddress) return; + + while(pUsb->ctrlReq(bAddress, mkSETUP_PKT16(UHS_BULK_bmREQ_OUT, UHS_BULK_REQ_BOMSR, 0x0000U, bIface, 0), 0, NULL) == 0x01) { + if(!UHS_SLEEP_MS(6)) break; + } + + if(!bAddress) return; + + UHS_SLEEP_MS(2500); +} + +/** + * For driver use only. + * + * @return 0 if successful + */ +uint8_t UHS_NI UHS_Bulk_Storage::ResetRecovery(void) { + if(!bAddress) return UHS_BULK_ERR_DEVICE_DISCONNECTED; + Notify(PSTR("\r\nResetRecovery\r\n"), 0x80); + Notify(PSTR("-----------------\r\n"), 0x80); + qNextPollTime = millis() + 90000; + uint8_t bLastUsbError = UHS_HOST_ERROR_UNPLUGGED; + if(UHS_SLEEP_MS(6)) { + Reset(); + if(UHS_SLEEP_MS(6)) { + bLastUsbError = ClearEpHalt(epDataInIndex); + if(UHS_SLEEP_MS(6)) { + + bLastUsbError = ClearEpHalt(epDataOutIndex); + UHS_SLEEP_MS(6); + } + } + } + return bLastUsbError; +} + +/** + * For driver use only. + * + * Clear all EP data and clear all LUN status + */ +void UHS_NI UHS_Bulk_Storage::DriverDefaults(void) { + + pUsb->DeviceDefaults(MASS_MAX_ENDPOINTS, this); + + for(uint8_t i = 0; i < MASS_MAX_SUPPORTED_LUN; i++) { + + LUNOk[i] = false; + WriteOk[i] = false; + CurrentCapacity[i] = 0lu; + CurrentSectorSize[i] = 0; + } + + dCBWTag = 0; + bMaxLUN = 0; + bTheLUN = 0; +} + +/** + * For driver use only. + * + * @param pcsw + * @param pcbw + * @return + */ +bool UHS_NI UHS_Bulk_Storage::IsValidCSW(UHS_BULK_CommandStatusWrapper *pcsw, UHS_BULK_CommandBlockWrapperBase *pcbw) { + if(!bAddress) return false; + if(pcsw->dCSWSignature != UHS_BULK_CSW_SIGNATURE) { + Notify(PSTR("CSW:Sig error\r\n"), 0x80); + return false; + } + if(pcsw->dCSWTag != pcbw->dCBWTag) { + Notify(PSTR("CSW:Wrong tag\r\n"), 0x80); + ErrorMessage (PSTR("dCSWTag"), pcsw->dCSWTag); + ErrorMessage (PSTR("dCBWTag"), pcbw->dCBWTag); + + return false; + } + return true; +} + +/** + * For driver use only. + * + * @param error + * @param index + * @return + */ +uint8_t UHS_NI UHS_Bulk_Storage::HandleUsbError(uint8_t error, uint8_t index) { + if(!bAddress) return UHS_BULK_ERR_DEVICE_DISCONNECTED; + + uint8_t count = 3; + while(error && count) { + if(error != UHS_HOST_ERROR_NONE) { + ErrorMessage (PSTR("USB Error"), error); + ErrorMessage (PSTR("Index"), index); + } + switch(error) { + // case UHS_HOST_ERROR_WRONGPID: + case UHS_HOST_ERROR_NONE: + return UHS_BULK_ERR_SUCCESS; + case UHS_HOST_ERROR_BUSY: + // SIE is busy, just hang out and try again. + return UHS_BULK_ERR_UNIT_BUSY; + case UHS_HOST_ERROR_NAK: + return UHS_BULK_ERR_UNIT_BUSY; + case UHS_HOST_ERROR_UNPLUGGED: + case UHS_HOST_ERROR_TIMEOUT: + case UHS_HOST_ERROR_JERR: + return UHS_BULK_ERR_DEVICE_DISCONNECTED; + case UHS_HOST_ERROR_STALL: + if(index == 0) return UHS_BULK_ERR_STALL; + ClearEpHalt(index); + if(index != epDataInIndex) return UHS_BULK_ERR_WRITE_STALL; + return UHS_BULK_ERR_STALL; + + + case UHS_HOST_ERROR_TOGERR: + // Handle a very super rare corner case, where toggles become de-synched. + // I have only ran into one device that has this firmware bug, and this is + // the only clean way to get back into sync with the buggy device firmware. + // --AJK + if(bAddress && bConfNum) { + error = pUsb->setConf(bAddress, bConfNum); + + if(error) break; + } + return UHS_BULK_ERR_SUCCESS; + + default: + ErrorMessage (PSTR("\r\nUSB"), error); + + return UHS_BULK_ERR_GENERAL_USB_ERROR; + } + count--; + } // while + + return ((error && !count) ? UHS_BULK_ERR_GENERAL_USB_ERROR : UHS_BULK_ERR_SUCCESS); +} + +/** + * For driver use only. + * + * @param pcbw + * @param buf_size + * @param buf + * @param flags + * @return + */ +uint8_t UHS_NI UHS_Bulk_Storage::Transaction(UHS_BULK_CommandBlockWrapper *pcbw, uint16_t buf_size, void *buf) { + if(!bAddress) return UHS_BULK_ERR_DEVICE_DISCONNECTED; + + uint16_t bytes = buf_size; + bool write = (pcbw->bmCBWFlags & UHS_BULK_CMD_DIR_IN) != UHS_BULK_CMD_DIR_IN; + uint8_t ret = 0; + uint8_t usberr; + UHS_BULK_CommandStatusWrapper csw; // up here, we allocate ahead to save cpu cycles. + SetCurLUN(pcbw->bmCBWLUN); + ErrorMessage (PSTR("CBW.dCBWTag"), pcbw->dCBWTag); + + while((usberr = pUsb->outTransfer(bAddress, epInfo[epDataOutIndex].epAddr, sizeof (UHS_BULK_CommandBlockWrapper), (uint8_t*)pcbw)) == UHS_HOST_ERROR_BUSY) { + if(!UHS_SLEEP_MS(1)) return UHS_BULK_ERR_DEVICE_DISCONNECTED; + } + ret = HandleUsbError(usberr, epDataOutIndex); + if(ret) { + ErrorMessage (PSTR("============================ CBW"), ret); + } else { + if(bytes) { + if(!write) { + while((usberr = pUsb->inTransfer(bAddress, epInfo[epDataInIndex].epAddr, &bytes, (uint8_t*)buf)) == UHS_HOST_ERROR_BUSY) { + if(!UHS_SLEEP_MS(1)) return UHS_BULK_ERR_DEVICE_DISCONNECTED; + } + ret = HandleUsbError(usberr, epDataInIndex); + } else { + while((usberr = pUsb->outTransfer(bAddress, epInfo[epDataOutIndex].epAddr, bytes, (uint8_t*)buf)) == UHS_HOST_ERROR_BUSY) { + if(!UHS_SLEEP_MS(1)) return UHS_BULK_ERR_DEVICE_DISCONNECTED; + } + ret = HandleUsbError(usberr, epDataOutIndex); + } + if(ret) { + ErrorMessage (PSTR("============================ DAT"), ret); + } + } + } + + { + bytes = sizeof (UHS_BULK_CommandStatusWrapper); + int tries = 2; + while(tries--) { + while((usberr = pUsb->inTransfer(bAddress, epInfo[epDataInIndex].epAddr, &bytes, (uint8_t*) & csw)) == UHS_HOST_ERROR_BUSY) { + if(!UHS_SLEEP_MS(1)) return UHS_BULK_ERR_DEVICE_DISCONNECTED; + } + if(!usberr) break; + if(tries) { + if(usberr == UHS_HOST_ERROR_STALL) { + ResetRecovery(); + } else { + ClearEpHalt(epDataInIndex); + } + } + } + if(!ret) { + Notify(PSTR("CBW:\t\tOK\r\n"), 0x80); + Notify(PSTR("Data Stage:\tOK\r\n"), 0x80); + } else { + // Throw away csw, IT IS NOT OF ANY USE. + ResetRecovery(); + return ret; + } + ret = HandleUsbError(usberr, epDataInIndex); + if(ret) { + ErrorMessage (PSTR("============================ CSW"), ret); + } + if(usberr == UHS_HOST_ERROR_NONE) { + if(IsValidCSW(&csw, pcbw)) { + //ErrorMessage (PSTR("CSW.dCBWTag"), csw.dCSWTag); + //ErrorMessage (PSTR("bCSWStatus"), csw.bCSWStatus); + //ErrorMessage (PSTR("dCSWDataResidue"), csw.dCSWDataResidue); + Notify(PSTR("CSW:\t\tOK\r\n\r\n"), 0x80); + return csw.bCSWStatus; + } else { + // NOTE! Sometimes this is caused by the reported residue being wrong. + // Get a different device. It isn't compliant, and should have never passed Q&A. + // I own one... 05e3:0701 Genesys Logic, Inc. USB 2.0 IDE Adapter. + // Other devices that exhibit this behavior exist in the wild too. + // Be sure to check quirks in the Linux source code before reporting a bug. --xxxajk + Notify(PSTR("Invalid CSW\r\n"), 0x80); + Reset(); + ResetRecovery(); + + return UHS_BULK_ERR_INVALID_CSW; + } + } + } + return ret; +} + +/** + * For driver use only. + * + * @param lun Logical Unit Number + * @return + */ +uint8_t UHS_NI UHS_Bulk_Storage::SetCurLUN(uint8_t lun) { + if(!bAddress) return UHS_BULK_ERR_DEVICE_DISCONNECTED; + if(lun > bMaxLUN) + return UHS_BULK_ERR_INVALID_LUN; + bTheLUN = lun; + + return UHS_BULK_ERR_SUCCESS; +}; + +/** + * For driver use only. + * + * @param status + * @return + */ +uint8_t UHS_NI UHS_Bulk_Storage::HandleSCSIError(uint8_t status) { + if(!bAddress) return UHS_BULK_ERR_DEVICE_DISCONNECTED; + uint8_t ret = 0; + switch(status) { + case 0: return UHS_BULK_ERR_SUCCESS; + + case 2: + ErrorMessage (PSTR("Phase Error"), status); + ErrorMessage (PSTR("LUN"), bTheLUN); + ResetRecovery(); + return UHS_BULK_ERR_GENERAL_SCSI_ERROR; + + case 1: + ErrorMessage (PSTR("SCSI Error"), status); + ErrorMessage (PSTR("LUN"), bTheLUN); + SCSI_Request_Sense_Response rsp; + + ret = RequestSense(bTheLUN, sizeof (SCSI_Request_Sense_Response), (uint8_t*) & rsp); + + if(ret) { + if(ret == UHS_BULK_ERR_DEVICE_DISCONNECTED) return UHS_BULK_ERR_DEVICE_DISCONNECTED; + return UHS_BULK_ERR_GENERAL_SCSI_ERROR; + } +#if ENABLE_UHS_DEBUGGING + ErrorMessage (PSTR("Response Code"), rsp.bResponseCode); + if(rsp.bResponseCode & 0x80) { + Notify(PSTR("Information field: "), 0x80); + for(int i = 0; i < 4; i++) { + D_PrintHex (rsp.CmdSpecificInformation[i], 0x80); + Notify(PSTR(" "), 0x80); + } + Notify(PSTR("\r\n"), 0x80); + } + ErrorMessage (PSTR("Sense Key"), rsp.bmSenseKey); + ErrorMessage (PSTR("Add Sense Code"), rsp.bAdditionalSenseCode); + ErrorMessage (PSTR("Add Sense Qual"), rsp.bAdditionalSenseQualifier); +#endif + // warning, this is not testing ASQ, only SK and ASC. + switch(rsp.bmSenseKey) { + case SCSI_S_UNIT_ATTENTION: + switch(rsp.bAdditionalSenseCode) { + case SCSI_ASC_MEDIA_CHANGED: + return UHS_BULK_ERR_MEDIA_CHANGED; + default: + return UHS_BULK_ERR_UNIT_NOT_READY; + } + case SCSI_S_NOT_READY: + switch(rsp.bAdditionalSenseCode) { + case SCSI_ASC_MEDIUM_NOT_PRESENT: + return UHS_BULK_ERR_NO_MEDIA; + default: + return UHS_BULK_ERR_UNIT_NOT_READY; + } + case SCSI_S_ILLEGAL_REQUEST: + switch(rsp.bAdditionalSenseCode) { + case SCSI_ASC_LBA_OUT_OF_RANGE: + return UHS_BULK_ERR_BAD_LBA; + default: + return UHS_BULK_ERR_CMD_NOT_SUPPORTED; + } + default: + return UHS_BULK_ERR_GENERAL_SCSI_ERROR; + } + + // case 4: return MASS_ERR_UNIT_BUSY; // Busy means retry later. + // case 0x05/0x14: we stalled out + // case 0x15/0x16: we naked out. + default: + ErrorMessage (PSTR("Gen SCSI Err"), status); + ErrorMessage (PSTR("LUN"), bTheLUN); + + return status; + } // switch +} + + +//////////////////////////////////////////////////////////////////////////////// + + +// Debugging code + + +//////////////////////////////////////////////////////////////////////////////// + +/** + * + * @param ep_ptr + */ +void UHS_NI UHS_Bulk_Storage::PrintEndpointDescriptor(const USB_ENDPOINT_DESCRIPTOR * ep_ptr) { + Notify(PSTR("Endpoint descriptor:"), 0x80); + Notify(PSTR("\r\nLength:\t\t"), 0x80); + D_PrintHex (ep_ptr->bLength, 0x80); + Notify(PSTR("\r\nType:\t\t"), 0x80); + D_PrintHex (ep_ptr->bDescriptorType, 0x80); + Notify(PSTR("\r\nAddress:\t"), 0x80); + D_PrintHex (ep_ptr->bEndpointAddress, 0x80); + Notify(PSTR("\r\nAttributes:\t"), 0x80); + D_PrintHex (ep_ptr->bmAttributes, 0x80); + Notify(PSTR("\r\nMaxPktSize:\t"), 0x80); + D_PrintHex (ep_ptr->wMaxPacketSize, 0x80); + Notify(PSTR("\r\nPoll Intrv:\t"), 0x80); + D_PrintHex (ep_ptr->bInterval, 0x80); + Notify(PSTR("\r\n"), 0x80); +} + +#else +#error "Never include UHS_BULK_STORAGE_INLINE.h, include UHS_host.h instead" +#endif diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_BULK_STORAGE/UHS_SCSI.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_BULK_STORAGE/UHS_SCSI.h new file mode 100644 index 000000000000..3655d8183f0a --- /dev/null +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_BULK_STORAGE/UHS_SCSI.h @@ -0,0 +1,328 @@ +/* Copyright (C) 2015-2016 Andrew J. Kroll + and +Copyright (C) 2011 Circuits At Home, LTD. All rights reserved. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +Contact information +------------------- + +Circuits At Home, LTD +Web : http://www.circuitsathome.com +e-mail : support@circuitsathome.com + */ + +#ifndef UHS_SCSI_H +#define UHS_SCSI_H + +/* + * Reference documents from T10 (http://www.t10.org) + * SCSI Primary Commands - 3 (SPC-3) + * SCSI Block Commands - 2 (SBC-2) + * Multi-Media Commands - 5 (MMC-5) + */ + +/* Group 1 commands (CDB's here are should all be 6-bytes) */ +#define SCSI_CMD_TEST_UNIT_READY 0x00U +#define SCSI_CMD_REQUEST_SENSE 0x03U +#define SCSI_CMD_FORMAT_UNIT 0x04U +#define SCSI_CMD_READ_6 0x08U +#define SCSI_CMD_WRITE_6 0x0AU +#define SCSI_CMD_INQUIRY 0x12U +#define SCSI_CMD_MODE_SELECT_6 0x15U +#define SCSI_CMD_MODE_SENSE_6 0x1AU +#define SCSI_CMD_START_STOP_UNIT 0x1BU +#define SCSI_CMD_PREVENT_REMOVAL 0x1EU +/* Group 2 Commands (CDB's here are 10-bytes) */ +#define SCSI_CMD_READ_FORMAT_CAPACITIES 0x23U +#define SCSI_CMD_READ_CAPACITY_10 0x25U +#define SCSI_CMD_READ_10 0x28U +#define SCSI_CMD_WRITE_10 0x2AU +#define SCSI_CMD_SEEK_10 0x2BU +#define SCSI_CMD_ERASE_10 0x2CU +#define SCSI_CMD_WRITE_AND_VERIFY_10 0x2EU +#define SCSI_CMD_VERIFY_10 0x2FU +#define SCSI_CMD_SYNCHRONIZE_CACHE 0x35U +#define SCSI_CMD_WRITE_BUFFER 0x3BU +#define SCSI_CMD_READ_BUFFER 0x3CU +#define SCSI_CMD_READ_SUBCHANNEL 0x42U +#define SCSI_CMD_READ_TOC 0x43U +#define SCSI_CMD_READ_HEADER 0x44U +#define SCSI_CMD_PLAY_AUDIO_10 0x45U +#define SCSI_CMD_GET_CONFIGURATION 0x46U +#define SCSI_CMD_PLAY_AUDIO_MSF 0x47U +#define SCSI_CMD_PLAY_AUDIO_TI 0x48U +#define SCSI_CMD_PLAY_TRACK_REL_10 0x49U +#define SCSI_CMD_GET_EVENT_STATUS 0x4AU +#define SCSI_CMD_PAUSE_RESUME 0x4BU +#define SCSI_CMD_READ_DISC_INFORMATION 0x51U +#define SCSI_CMD_READ_TRACK_INFORMATION 0x52U +#define SCSI_CMD_RESERVE_TRACK 0x53U +#define SCSI_CMD_SEND_OPC_INFORMATION 0x54U +#define SCSI_CMD_MODE_SELECT_10 0x55U +#define SCSI_CMD_REPAIR_TRACK 0x58U +#define SCSI_CMD_MODE_SENSE_10 0x5AU +#define SCSI_CMD_CLOSE_TRACK_SESSION 0x5BU +#define SCSI_CMD_READ_BUFFER_CAPACITY 0x5CU +#define SCSI_CMD_SEND_CUE_SHEET 0x5DU +/* Group 5 Commands (CDB's here are 12-bytes) */ +#define SCSI_CMD_REPORT_LUNS 0xA0U +#define SCSI_CMD_BLANK 0xA1U +#define SCSI_CMD_SECURITY_PROTOCOL_IN 0xA2U +#define SCSI_CMD_SEND_KEY 0xA3U +#define SCSI_CMD_REPORT_KEY 0xA4U +#define SCSI_CMD_PLAY_AUDIO_12 0xA5U +#define SCSI_CMD_LOAD_UNLOAD 0xA6U +#define SCSI_CMD_SET_READ_AHEAD 0xA7U +#define SCSI_CMD_READ_12 0xA8U +#define SCSI_CMD_PLAY_TRACK_REL_12 0xA9U +#define SCSI_CMD_WRITE_12 0xAAU +#define SCSI_CMD_READ_MEDIA_SERIAL_12 0xABU +#define SCSI_CMD_GET_PERFORMANCE 0xACU +#define SCSI_CMD_READ_DVD_STRUCTURE 0xADU +#define SCSI_CMD_SECURITY_PROTOCOL_OUT 0xB5U +#define SCSI_CMD_SET_STREAMING 0xB6U +#define SCSI_CMD_READ_MSF 0xB9U +#define SCSI_CMD_SET_SPEED 0xBBU +#define SCSI_CMD_MECHANISM_STATUS 0xBDU +#define SCSI_CMD_READ_CD 0xBEU +#define SCSI_CMD_SEND_DISC_STRUCTURE 0xBFU +/* Vendor-unique Commands, included for completeness */ +#define SCSI_CMD_CD_PLAYBACK_STATUS 0xC4U /* SONY unique */ +#define SCSI_CMD_PLAYBACK_CONTROL 0xC9U /* SONY unique */ +#define SCSI_CMD_READ_CDDA 0xD8U /* Vendor unique */ +#define SCSI_CMD_READ_CDXA 0xDBU /* Vendor unique */ +#define SCSI_CMD_READ_ALL_SUBCODES 0xDFU /* Vendor unique */ + +/* SCSI error codes */ +#define SCSI_S_NOT_READY 0x02U +#define SCSI_S_MEDIUM_ERROR 0x03U +#define SCSI_S_ILLEGAL_REQUEST 0x05U +#define SCSI_S_UNIT_ATTENTION 0x06U +#define SCSI_ASC_LBA_OUT_OF_RANGE 0x21U +#define SCSI_ASC_MEDIA_CHANGED 0x28U +#define SCSI_ASC_MEDIUM_NOT_PRESENT 0x3AU + +struct SCSI_Capacity { + uint8_t data[8]; + //uint32_t dwBlockAddress; + //uint32_t dwBlockLength; +} __attribute__((packed)); + +struct SCSI_CDB_BASE { + uint8_t Opcode; + + unsigned unused : 5; + unsigned LUN : 3; + + uint8_t info[12]; +} __attribute__((packed)); + +typedef SCSI_CDB_BASE SCSI_CDB_BASE_t; + +struct SCSI_CDB6 { + uint8_t Opcode; + + unsigned LBAMSB : 5; + unsigned LUN : 3; + + uint8_t LBAHB; + uint8_t LBALB; + uint8_t AllocationLength; + uint8_t Control; + +public: + + SCSI_CDB6(uint8_t _Opcode, uint8_t _LUN, uint32_t LBA, uint8_t _AllocationLength, uint8_t _Control) : + Opcode(_Opcode), LBAMSB(UHS_UINT8_BYTE2(LBA) & 0x1f), LUN(_LUN), LBAHB(UHS_UINT8_BYTE1(LBA)), LBALB(UHS_UINT8_BYTE0(LBA)), + AllocationLength(_AllocationLength), Control(_Control) { + } + + SCSI_CDB6(uint8_t _Opcode, uint8_t _LUN, uint8_t _AllocationLength, uint8_t _Control) : + Opcode(_Opcode), LBAMSB(0), LUN(_LUN), LBAHB(0), LBALB(0), + AllocationLength(_AllocationLength), Control(_Control) { + } +} __attribute__((packed)); + +typedef SCSI_CDB6 SCSI_CDB6_t; + +struct SCSI_CDB10 { + uint8_t Opcode; + + unsigned Service_Action : 5; + unsigned LUN : 3; + + uint8_t LBA_L_M_MB; + uint8_t LBA_L_M_LB; + uint8_t LBA_L_L_MB; + uint8_t LBA_L_L_LB; + + uint8_t Misc2; + + uint8_t ALC_MB; + uint8_t ALC_LB; + + uint8_t Control; +public: + + SCSI_CDB10(uint8_t _Opcode, uint8_t _LUN) : + Opcode(_Opcode), Service_Action(0), LUN(_LUN), + LBA_L_M_MB(0), LBA_L_M_LB(0), LBA_L_L_MB(0), LBA_L_L_LB(0), + Misc2(0), ALC_MB(0), ALC_LB(0), Control(0) { + } + + SCSI_CDB10(uint8_t _Opcode, uint8_t _LUN, uint16_t xflen, uint32_t _LBA) : + Opcode(_Opcode), Service_Action(0), LUN(_LUN), + LBA_L_M_MB(UHS_UINT8_BYTE3(_LBA)), LBA_L_M_LB(UHS_UINT8_BYTE2(_LBA)), LBA_L_L_MB(UHS_UINT8_BYTE1(_LBA)), LBA_L_L_LB(UHS_UINT8_BYTE0(_LBA)), + Misc2(0), ALC_MB(UHS_UINT8_BYTE1(xflen)), ALC_LB(UHS_UINT8_BYTE0(xflen)), Control(0) { + } +} __attribute__((packed)); + +typedef SCSI_CDB10 SCSI_CDB10_t; + +struct SCSI_CDB12 { + uint8_t Opcode; + + unsigned Service_Action : 5; + unsigned Misc : 3; + + uint8_t LBA_L_M_LB; + uint8_t LBA_L_L_MB; + uint8_t LBA_L_L_LB; + + uint8_t ALC_M_LB; + uint8_t ALC_L_MB; + uint8_t ALC_L_LB; + uint8_t Control; +} __attribute__((packed)); + +typedef SCSI_CDB12 SCSI_CDB12_t; + +struct SCSI_CDB_LBA32_16 { + uint8_t Opcode; + + unsigned Service_Action : 5; + unsigned Misc : 3; + + uint8_t LBA_L_M_MB; + uint8_t LBA_L_M_LB; + uint8_t LBA_L_L_MB; + uint8_t LBA_L_L_LB; + + uint8_t A_M_M_MB; + uint8_t A_M_M_LB; + uint8_t A_M_L_MB; + uint8_t A_M_L_LB; + + uint8_t ALC_M_MB; + uint8_t ALC_M_LB; + uint8_t ALC_L_MB; + uint8_t ALC_L_LB; + + uint8_t Misc2; + uint8_t Control; +} __attribute__((packed)); + +struct SCSI_CDB_LBA64_16 { + uint8_t Opcode; + uint8_t Misc; + + uint8_t LBA_M_M_MB; + uint8_t LBA_M_M_LB; + uint8_t LBA_M_L_MB; + uint8_t LBA_M_L_LB; + + uint8_t LBA_L_M_MB; + uint8_t LBA_L_M_LB; + uint8_t LBA_L_L_MB; + uint8_t LBA_L_L_LB; + + uint8_t ALC_M_MB; + uint8_t ALC_M_LB; + uint8_t ALC_L_MB; + uint8_t ALC_L_LB; + + uint8_t Misc2; + uint8_t Control; +} __attribute__((packed)); + +struct SCSI_Inquiry_Response { + uint8_t DeviceType : 5; + uint8_t PeripheralQualifier : 3; + + unsigned Reserved : 7; + unsigned Removable : 1; + + uint8_t Version; + + unsigned ResponseDataFormat : 4; + unsigned HISUP : 1; + unsigned NormACA : 1; + unsigned TrmTsk : 1; + unsigned AERC : 1; + + uint8_t AdditionalLength; + + unsigned PROTECT : 1; + unsigned Res : 2; + unsigned ThreePC : 1; + unsigned TPGS : 2; + unsigned ACC : 1; + unsigned SCCS : 1; + + unsigned ADDR16 : 1; + unsigned R1 : 1; + unsigned R2 : 1; + unsigned MCHNGR : 1; + unsigned MULTIP : 1; + unsigned VS : 1; + unsigned ENCSERV : 1; + unsigned BQUE : 1; + + unsigned SoftReset : 1; + unsigned CmdQue : 1; + unsigned Reserved4 : 1; + unsigned Linked : 1; + unsigned Sync : 1; + unsigned WideBus16Bit : 1; + unsigned WideBus32Bit : 1; + unsigned RelAddr : 1; + + uint8_t VendorID[8]; + uint8_t ProductID[16]; + uint8_t RevisionID[4]; +} __attribute__((packed)); + +struct SCSI_Request_Sense_Response { + uint8_t bResponseCode; + uint8_t bSegmentNumber; + + uint8_t bmSenseKey : 4; + uint8_t bmReserved : 1; + uint8_t bmILI : 1; + uint8_t bmEOM : 1; + uint8_t bmFileMark : 1; + + uint8_t Information[4]; + uint8_t bAdditionalLength; + uint8_t CmdSpecificInformation[4]; + uint8_t bAdditionalSenseCode; + uint8_t bAdditionalSenseQualifier; + uint8_t bFieldReplaceableUnitCode; + uint8_t SenseKeySpecific[3]; +} __attribute__((packed)); + +#endif /* UHS_SCSI_H */ + diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_UNOFFICIAL_IDs.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_UNOFFICIAL_IDs.h new file mode 100644 index 000000000000..5c60f2d1839a --- /dev/null +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_UNOFFICIAL_IDs.h @@ -0,0 +1,33 @@ +/* Copyright (C) 2015-2016 Andrew J. Kroll + and +Copyright (C) 2011 Circuits At Home, LTD. All rights reserved. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +Contact information +------------------- + +Circuits At Home, LTD +Web : http://www.circuitsathome.com +e-mail : support@circuitsathome.com + */ +#ifndef _UHS_UNOFFICIAL_IDs_h +#define _UHS_UNOFFICIAL_IDs_h + +// Bogus unofficial and unregistered VIDs from cloners to be listed here. + +#define UHS_VID_UNOFFICIAL_JOYTECH 0x162EU // For unofficial Joytech controllers + +#endif diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_USB_IDs.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_USB_IDs.h new file mode 100644 index 000000000000..68d7885c6ba8 --- /dev/null +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_USB_IDs.h @@ -0,0 +1,2995 @@ +/* + * USB vendor ids + * This file was generated by running python ./make-USB_IDs.py > UHS_USB_IDs.h + * Don't change it directly. + * + * Copyright 2014, Andrew J. Kroll for Circuits At Home, LTD. All rights reserved. + * + * Copyright 2012, Michal Labedzki for Tieto Corporation + * Other values imported from libghoto2/camlibs/ptp2/library.c, music-players.h + * Copyright (C) 2001-2005 Mariusz Woloszyn + * Copyright (C) 2003-2013 Marcus Meissner + * Copyright (C) 2005 Hubert Figuiere + * Copyright (C) 2009 Axel Waggershauser + * Copyright (C) 2005-2007 Richard A. Low + * Copyright (C) 2005-2012 Linus Walleij + * Copyright (C) 2007 Ted Bullock + * Copyright (C) 2012 Sony Mobile Communications AB + * + * Wireshark - Network traffic analyzer + * By Gerald Combs + * Copyright 1998 Gerald Combs + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ +#ifndef _UHS_USB_IDs_h_ +#define _UHS_USB_IDs_h_ +#include "UHS_UNOFFICIAL_IDs.h" + +#define UHS_VID_FRYS_ELECTRONICS 0x0001U // Fry's Electronics +#define UHS_VID_INGRAM 0x0002U // Ingram +#define UHS_VID_CLUB_MAC 0x0003U // Club Mac +#define UHS_VID_NEBRASKA_FURNITURE_MART 0x0004U // Nebraska Furniture Mart +#define UHS_VID_UNKNOWN 0x0011U // Unknown +#define UHS_VID_PLANEX 0x0053U // Planex +#define UHS_VID_DRAGONRISE 0x0079U // DragonRise Inc. +#define UHS_VID_TRUST_INTERNATIONAL_BV 0x0105U // Trust International B.V. +#define UHS_VID_IBP 0x0127U // IBP +#define UHS_VID_UNKNOWN_1 0x0145U // Unknown +#define UHS_VID_MLK 0x017cU // MLK +#define UHS_VID_TP_LINK 0x0200U // TP-Link +#define UHS_VID_CHIPSBANK_MICROELECTRONICS 0x0204U // Chipsbank Microelectronics Co., Ltd +#define UHS_VID_HANGZHOU_WORLDE 0x0218U // Hangzhou Worlde +#define UHS_VID_HUMAX 0x02adU // HUMAX Co., Ltd. +#define UHS_VID_MM300_EBOOK_READER 0x0300U // MM300 eBook Reader +#define UHS_VID_OCZ_TECHNOLOGY 0x0324U // OCZ Technology Inc +#define UHS_VID_OCZ_TECHNOLOGY_1 0x0325U // OCZ Technology Inc +#define UHS_VID_LTS 0x0386U // LTS +#define UHS_VID_SHENZHEN_SINOTE_TECH_ELECTRON 0x03d9U // Shenzhen Sinote Tech-Electron Co., Ltd +#define UHS_VID_BERND_WALTER_COMPUTER_TECHNOLOGY 0x03daU // Bernd Walter Computer Technology +#define UHS_VID_ENDPOINTS 0x03e8U // EndPoints, Inc. +#define UHS_VID_THESYS_MICROELECTRONICS 0x03e9U // Thesys Microelectronics +#define UHS_VID_DATA_BROADCASTING 0x03eaU // Data Broadcasting Corp. +#define UHS_VID_ATMEL 0x03ebU // Atmel Corp. +#define UHS_VID_IWATSU_AMERICA 0x03ecU // Iwatsu America, Inc. +#define UHS_VID_MITEL 0x03edU // Mitel Corp. +#define UHS_VID_MITSUMI 0x03eeU // Mitsumi +#define UHS_VID_HEWLETT_PACKARD 0x03f0U // Hewlett-Packard +#define UHS_VID_GENOA_TECHNOLOGY 0x03f1U // Genoa Technology +#define UHS_VID_OAK_TECHNOLOGY 0x03f2U // Oak Technology, Inc. +#define UHS_VID_ADAPTEC 0x03f3U // Adaptec, Inc. +#define UHS_VID_DIEBOLD 0x03f4U // Diebold, Inc. +#define UHS_VID_SIEMENS_ELECTROMECHANICAL 0x03f5U // Siemens Electromechanical +#define UHS_VID_EPSON_IMAGING_TECHNOLOGY_CENTER 0x03f8U // Epson Imaging Technology Center +#define UHS_VID_KEYTRONIC 0x03f9U // KeyTronic Corp. +#define UHS_VID_OPTI 0x03fbU // OPTi, Inc. +#define UHS_VID_ELITEGROUP_COMPUTER_SYSTEMS 0x03fcU // Elitegroup Computer Systems +#define UHS_VID_XILINX 0x03fdU // Xilinx, Inc. +#define UHS_VID_FARALLON_COMUNICATIONS 0x03feU // Farallon Comunications +#define UHS_VID_NATIONAL_SEMICONDUCTOR 0x0400U // National Semiconductor Corp. +#define UHS_VID_NATIONAL_REGISTRY 0x0401U // National Registry, Inc. +#define UHS_VID_ALI 0x0402U // ALi Corp. +#define UHS_VID_FUTURE_TECHNOLOGY_DEVICES_INTERNATIONAL 0x0403U // Future Technology Devices International, Ltd +#define UHS_VID_NCR 0x0404U // NCR Corp. +#define UHS_VID_SYNOPSYS 0x0405U // Synopsys, Inc. +#define UHS_VID_FUJITSU_ICL_COMPUTERS 0x0406U // Fujitsu-ICL Computers +#define UHS_VID_FUJITSU_PERSONAL_SYSTEMS 0x0407U // Fujitsu Personal Systems, Inc. +#define UHS_VID_QUANTA_COMPUTER 0x0408U // Quanta Computer, Inc. +#define UHS_VID_NEC 0x0409U // NEC Corp. +#define UHS_VID_KODAK 0x040aU // Kodak Co. +#define UHS_VID_WELTREND_SEMICONDUCTOR 0x040bU // Weltrend Semiconductor +#define UHS_VID_VTECH_COMPUTERS 0x040cU // VTech Computers, Ltd +#define UHS_VID_VIA_TECHNOLOGIES 0x040dU // VIA Technologies, Inc. +#define UHS_VID_MCCI 0x040eU // MCCI +#define UHS_VID_ECHO_SPEECH 0x040fU // Echo Speech Corp. +#define UHS_VID_BUFFALO_INC_FORMERLY_MELCO 0x0411U // BUFFALO INC. (formerly MelCo., Inc.) +#define UHS_VID_AWARD_SOFTWARE_INTERNATIONAL 0x0412U // Award Software International +#define UHS_VID_LEADTEK_RESEARCH 0x0413U // Leadtek Research, Inc. +#define UHS_VID_GIGA_BYTE_TECHNOLOGY 0x0414U // Giga-Byte Technology Co., Ltd +#define UHS_VID_WINBOND_ELECTRONICS 0x0416U // Winbond Electronics Corp. +#define UHS_VID_SYMBIOS_LOGIC 0x0417U // Symbios Logic +#define UHS_VID_AST_RESEARCH 0x0418U // AST Research +#define UHS_VID_SAMSUNG_INFO_SYSTEMS_AMERICA 0x0419U // Samsung Info. Systems America, Inc. +#define UHS_VID_PHOENIX_TECHNOLOGIES 0x041aU // Phoenix Technologies, Ltd +#define UHS_VID_DTV 0x041bU // d'TV +#define UHS_VID_S3 0x041dU // S3, Inc. +#define UHS_VID_CREATIVE_TECHNOLOGY 0x041eU // Creative Technology, Ltd +#define UHS_VID_LCS_TELEGRAPHICS 0x041fU // LCS Telegraphics +#define UHS_VID_CHIPS_AND_TECHNOLOGIES 0x0420U // Chips and Technologies +#define UHS_VID_NOKIA_MOBILE_PHONES 0x0421U // Nokia Mobile Phones +#define UHS_VID_ADI_SYSTEMS 0x0422U // ADI Systems, Inc. +#define UHS_VID_COMPUTER_ACCESS_TECHNOLOGY 0x0423U // Computer Access Technology Corp. +#define UHS_VID_STANDARD_MICROSYSTEMS 0x0424U // Standard Microsystems Corp. +#define UHS_VID_MOTOROLA_SEMICONDUCTORS_HK 0x0425U // Motorola Semiconductors HK, Ltd +#define UHS_VID_INTEGRATED_DEVICE_TECHNOLOGY 0x0426U // Integrated Device Technology, Inc. +#define UHS_VID_MOTOROLA_ELECTRONICS_TAIWAN 0x0427U // Motorola Electronics Taiwan, Ltd +#define UHS_VID_ADVANCED_GRAVIS_COMPUTER_TECH 0x0428U // Advanced Gravis Computer Tech, Ltd +#define UHS_VID_CIRRUS_LOGIC 0x0429U // Cirrus Logic +#define UHS_VID_ERICSSON_AUSTRIAN_AG 0x042aU // Ericsson Austrian, AG +#define UHS_VID_INTEL 0x042bU // Intel Corp. +#define UHS_VID_INNOVATIVE_SEMICONDUCTORS 0x042cU // Innovative Semiconductors, Inc. +#define UHS_VID_MICRONICS 0x042dU // Micronics +#define UHS_VID_ACER 0x042eU // Acer, Inc. +#define UHS_VID_MOLEX 0x042fU // Molex, Inc. +#define UHS_VID_SUN_MICROSYSTEMS 0x0430U // Sun Microsystems, Inc. +#define UHS_VID_ITAC_SYSTEMS 0x0431U // Itac Systems, Inc. +#define UHS_VID_UNISYS 0x0432U // Unisys Corp. +#define UHS_VID_ALPS_ELECTRIC 0x0433U // Alps Electric, Inc. +#define UHS_VID_SAMSUNG_INFO_SYSTEMS_AMERICA_1 0x0434U // Samsung Info. Systems America, Inc. +#define UHS_VID_HYUNDAI_ELECTRONICS_AMERICA 0x0435U // Hyundai Electronics America +#define UHS_VID_TAUGAGREINING_HF 0x0436U // Taugagreining HF +#define UHS_VID_FRAMATOME_CONNECTORS_USA 0x0437U // Framatome Connectors USA +#define UHS_VID_ADVANCED_MICRO_DEVICES 0x0438U // Advanced Micro Devices, Inc. +#define UHS_VID_VOICE_TECHNOLOGIES_GROUP 0x0439U // Voice Technologies Group +#define UHS_VID_LEXMARK_INTERNATIONAL 0x043dU // Lexmark International, Inc. +#define UHS_VID_LG_ELECTRONICS_USA 0x043eU // LG Electronics USA, Inc. +#define UHS_VID_RADISYS 0x043fU // RadiSys Corp. +#define UHS_VID_EIZO_NANAO 0x0440U // Eizo Nanao Corp. +#define UHS_VID_WINBOND_SYSTEMS_LAB 0x0441U // Winbond Systems Lab. +#define UHS_VID_ERICSSON 0x0442U // Ericsson, Inc. +#define UHS_VID_GATEWAY 0x0443U // Gateway, Inc. +#define UHS_VID_LUCENT_TECHNOLOGIES 0x0445U // Lucent Technologies, Inc. +#define UHS_VID_NMB_TECHNOLOGIES 0x0446U // NMB Technologies Corp. +#define UHS_VID_MOMENTUM_MICROSYSTEMS 0x0447U // Momentum Microsystems +#define UHS_VID_SHAMROCK_TECH 0x044aU // Shamrock Tech. Co., Ltd +#define UHS_VID_WSI 0x044bU // WSI +#define UHS_VID_CCLITRI 0x044cU // CCL/ITRI +#define UHS_VID_SIEMENS_NIXDORF_AG 0x044dU // Siemens Nixdorf AG +#define UHS_VID_ALPS_ELECTRIC_1 0x044eU // Alps Electric Co., Ltd +#define UHS_VID_THRUSTMASTER 0x044fU // ThrustMaster, Inc. +#define UHS_VID_DFI 0x0450U // DFI, Inc. +#define UHS_VID_TEXAS_INSTRUMENTS 0x0451U // Texas Instruments, Inc. +#define UHS_VID_MITSUBISHI_ELECTRONICS_AMERICA 0x0452U // Mitsubishi Electronics America, Inc. +#define UHS_VID_CMD_TECHNOLOGY 0x0453U // CMD Technology +#define UHS_VID_VOBIS_MICROCOMPUTER_AG 0x0454U // Vobis Microcomputer AG +#define UHS_VID_TELEMATICS_INTERNATIONAL 0x0455U // Telematics International, Inc. +#define UHS_VID_ANALOG_DEVICES 0x0456U // Analog Devices, Inc. +#define UHS_VID_SILICON_INTEGRATED_SYSTEMS 0x0457U // Silicon Integrated Systems Corp. +#define UHS_VID_KYE_SYSTEMS_CORP_MOUSE_SYSTEMS 0x0458U // KYE Systems Corp. (Mouse Systems) +#define UHS_VID_ADOBE_SYSTEMS 0x0459U // Adobe Systems, Inc. +#define UHS_VID_SONICBLUE 0x045aU // SONICblue, Inc. +#define UHS_VID_HITACHI 0x045bU // Hitachi, Ltd +#define UHS_VID_NORTEL_NETWORKS 0x045dU // Nortel Networks, Ltd +#define UHS_VID_MICROSOFT 0x045eU // Microsoft Corp. +#define UHS_VID_ACE_CAD_ENTERPRISE 0x0460U // Ace Cad Enterprise Co., Ltd +#define UHS_VID_PRIMAX_ELECTRONICS 0x0461U // Primax Electronics, Ltd +#define UHS_VID_MGE_UPS_SYSTEMS 0x0463U // MGE UPS Systems +#define UHS_VID_AMPTYCOELECTRONICS 0x0464U // AMP/Tycoelectronics Corp. +#define UHS_VID_ATANDT_PARADYNE 0x0467U // AT&T Paradyne +#define UHS_VID_WIESON_TECHNOLOGIES 0x0468U // Wieson Technologies Co., Ltd +#define UHS_VID_CHERRY 0x046aU // Cherry GmbH +#define UHS_VID_AMERICAN_MEGATRENDS 0x046bU // American Megatrends, Inc. +#define UHS_VID_TOSHIBA_CORP_DIGITAL_MEDIA_EQUIPMENT 0x046cU // Toshiba Corp., Digital Media Equipment +#define UHS_VID_LOGITECH 0x046dU // Logitech, Inc. +#define UHS_VID_BEHAVIOR_TECH_COMPUTER 0x046eU // Behavior Tech. Computer Corp. +#define UHS_VID_CRYSTAL_SEMICONDUCTOR 0x046fU // Crystal Semiconductor +#define UHS_VID_PHILIPS_OR_NXP 0x0471U // Philips (or NXP) +#define UHS_VID_CHICONY_ELECTRONICS 0x0472U // Chicony Electronics Co., Ltd +#define UHS_VID_SANYO_INFORMATION_BUSINESS 0x0473U // Sanyo Information Business Co., Ltd +#define UHS_VID_SANYO_ELECTRIC 0x0474U // Sanyo Electric Co., Ltd +#define UHS_VID_RELISYSTECO_INFORMATION_SYSTEM 0x0475U // Relisys/Teco Information System +#define UHS_VID_AESP 0x0476U // AESP +#define UHS_VID_SEAGATE_TECHNOLOGY 0x0477U // Seagate Technology, Inc. +#define UHS_VID_CONNECTIX 0x0478U // Connectix Corp. +#define UHS_VID_ADVANCED_PERIPHERAL_LABORATORIES 0x0479U // Advanced Peripheral Laboratories +#define UHS_VID_SEMTECH 0x047aU // Semtech Corp. +#define UHS_VID_SILITEK 0x047bU // Silitek Corp. +#define UHS_VID_DELL_COMPUTER 0x047cU // Dell Computer Corp. +#define UHS_VID_KENSINGTON 0x047dU // Kensington +#define UHS_VID_AGERE_SYSTEMS_INC_LUCENT 0x047eU // Agere Systems, Inc. (Lucent) +#define UHS_VID_PLANTRONICS 0x047fU // Plantronics, Inc. +#define UHS_VID_TOSHIBA_AMERICA 0x0480U // Toshiba America Inc +#define UHS_VID_ZENITH_DATA_SYSTEMS 0x0481U // Zenith Data Systems +#define UHS_VID_KYOCERA 0x0482U // Kyocera Corp. +#define UHS_VID_STMICROELECTRONICS 0x0483U // STMicroelectronics +#define UHS_VID_SPECIALIX 0x0484U // Specialix +#define UHS_VID_NOKIA_MONITORS 0x0485U // Nokia Monitors +#define UHS_VID_ASUS_COMPUTERS 0x0486U // ASUS Computers, Inc. +#define UHS_VID_STEWART_CONNECTOR 0x0487U // Stewart Connector +#define UHS_VID_CIRQUE 0x0488U // Cirque Corp. +#define UHS_VID_FOXCONN_HON_HAI 0x0489U // Foxconn / Hon Hai +#define UHS_VID_S_MOS_SYSTEMS 0x048aU // S-MOS Systems, Inc. +#define UHS_VID_ALPS_ELECTRIC_IRELAND 0x048cU // Alps Electric Ireland, Ltd +#define UHS_VID_INTEGRATED_TECHNOLOGY_EXPRESS 0x048dU // Integrated Technology Express, Inc. +#define UHS_VID_EICON_TECH 0x048fU // Eicon Tech. +#define UHS_VID_UNITED_MICROELECTRONICS 0x0490U // United Microelectronics Corp. +#define UHS_VID_CAPETRONIC 0x0491U // Capetronic +#define UHS_VID_SAMSUNG_SEMICONDUCTOR 0x0492U // Samsung SemiConductor, Inc. +#define UHS_VID_MAG_TECHNOLOGY 0x0493U // MAG Technology Co., Ltd +#define UHS_VID_ESS_TECHNOLOGY 0x0495U // ESS Technology, Inc. +#define UHS_VID_MICRON_ELECTRONICS 0x0496U // Micron Electronics +#define UHS_VID_SMILE_INTERNATIONAL 0x0497U // Smile International +#define UHS_VID_CAPETRONIC_KAOHSIUNG 0x0498U // Capetronic (Kaohsiung) Corp. +#define UHS_VID_YAMAHA 0x0499U // Yamaha Corp. +#define UHS_VID_GANDALF_TECHNOLOGIES 0x049aU // Gandalf Technologies, Ltd +#define UHS_VID_CURTIS_COMPUTER_PRODUCTS 0x049bU // Curtis Computer Products +#define UHS_VID_ACER_ADVANCED_LABS 0x049cU // Acer Advanced Labs, Inc. +#define UHS_VID_VLSI_TECHNOLOGY 0x049dU // VLSI Technology +#define UHS_VID_COMPAQ_COMPUTER 0x049fU // Compaq Computer Corp. +#define UHS_VID_DIGITAL_EQUIPMENT 0x04a0U // Digital Equipment Corp. +#define UHS_VID_SYSTEMSOFT 0x04a1U // SystemSoft Corp. +#define UHS_VID_FIREPOWER_SYSTEMS 0x04a2U // FirePower Systems +#define UHS_VID_TRIDENT_MICROSYSTEMS 0x04a3U // Trident Microsystems, Inc. +#define UHS_VID_HITACHI_1 0x04a4U // Hitachi, Ltd +#define UHS_VID_ACER_PERIPHERALS_INC_NOW_BENQ 0x04a5U // Acer Peripherals Inc. (now BenQ Corp.) +#define UHS_VID_NOKIA_DISPLAY_PRODUCTS 0x04a6U // Nokia Display Products +#define UHS_VID_VISIONEER 0x04a7U // Visioneer +#define UHS_VID_MULTIVIDEO_LABS 0x04a8U // Multivideo Labs, Inc. +#define UHS_VID_CANON 0x04a9U // Canon, Inc. +#define UHS_VID_DAEWOO_TELECOM 0x04aaU // DaeWoo Telecom, Ltd +#define UHS_VID_CHROMATIC_RESEARCH 0x04abU // Chromatic Research +#define UHS_VID_MICRO_AUDIOMETRICS 0x04acU // Micro Audiometrics Corp. +#define UHS_VID_DOOIN_ELECTRONICS 0x04adU // Dooin Electronics +#define UHS_VID_WINNOV_LP 0x04afU // Winnov L.P. +#define UHS_VID_NIKON 0x04b0U // Nikon Corp. +#define UHS_VID_PAN_INTERNATIONAL 0x04b1U // Pan International +#define UHS_VID_IBM 0x04b3U // IBM Corp. +#define UHS_VID_CYPRESS_SEMICONDUCTOR 0x04b4U // Cypress Semiconductor Corp. +#define UHS_VID_ROHM_LSI_SYSTEMS_USA 0x04b5U // ROHM LSI Systems USA, LLC +#define UHS_VID_HINT 0x04b6U // Hint Corp. +#define UHS_VID_COMPAL_ELECTRONICS 0x04b7U // Compal Electronics, Inc. +#define UHS_VID_SEIKO_EPSON 0x04b8U // Seiko Epson Corp. +#define UHS_VID_RAINBOW_TECHNOLOGIES 0x04b9U // Rainbow Technologies, Inc. +#define UHS_VID_TOUCAN_SYSTEMS 0x04baU // Toucan Systems, Ltd +#define UHS_VID_I_O_DATA_DEVICE 0x04bbU // I-O Data Device, Inc. +#define UHS_VID_TOSHIBA_ELECTRONICS_TAIWAN 0x04bdU // Toshiba Electronics Taiwan Corp. +#define UHS_VID_TELIA_RESEARCH 0x04beU // Telia Research AB +#define UHS_VID_TDK 0x04bfU // TDK Corp. +#define UHS_VID_US_ROBOTICS_3COM 0x04c1U // U.S. Robotics (3Com) +#define UHS_VID_METHODE_ELECTRONICS_FAR_EAST_PTE 0x04c2U // Methode Electronics Far East PTE, Ltd +#define UHS_VID_MAXI_SWITCH 0x04c3U // Maxi Switch, Inc. +#define UHS_VID_LOCKHEED_MARTIN_ENERGY_RESEARCH 0x04c4U // Lockheed Martin Energy Research +#define UHS_VID_FUJITSU 0x04c5U // Fujitsu, Ltd +#define UHS_VID_TOSHIBA_AMERICA_ELECTRONIC_COMPONENTS 0x04c6U // Toshiba America Electronic Components +#define UHS_VID_MICRO_MACRO_TECHNOLOGIES 0x04c7U // Micro Macro Technologies +#define UHS_VID_KONICA 0x04c8U // Konica Corp. +#define UHS_VID_LITE_ON_TECHNOLOGY 0x04caU // Lite-On Technology Corp. +#define UHS_VID_FUJI_PHOTO_FILM 0x04cbU // Fuji Photo Film Co., Ltd +#define UHS_VID_ST_ERICSSON 0x04ccU // ST-Ericsson +#define UHS_VID_TATUNG_CO_OF_AMERICA 0x04cdU // Tatung Co. Of America +#define UHS_VID_SCANLOGIC 0x04ceU // ScanLogic Corp. +#define UHS_VID_MYSON_CENTURY 0x04cfU // Myson Century, Inc. +#define UHS_VID_DIGI_INTERNATIONAL 0x04d0U // Digi International +#define UHS_VID_ITT_CANON 0x04d1U // ITT Canon +#define UHS_VID_ALTEC_LANSING_TECHNOLOGIES 0x04d2U // Altec Lansing Technologies +#define UHS_VID_VIDUS 0x04d3U // VidUS, Inc. +#define UHS_VID_LSI_LOGIC 0x04d4U // LSI Logic, Inc. +#define UHS_VID_FORTE_TECHNOLOGIES 0x04d5U // Forte Technologies, Inc. +#define UHS_VID_MENTOR_GRAPHICS 0x04d6U // Mentor Graphics +#define UHS_VID_OKI_SEMICONDUCTOR 0x04d7U // Oki Semiconductor +#define UHS_VID_MICROCHIP_TECHNOLOGY 0x04d8U // Microchip Technology, Inc. +#define UHS_VID_HOLTEK_SEMICONDUCTOR 0x04d9U // Holtek Semiconductor, Inc. +#define UHS_VID_PANASONIC_MATSUSHITA 0x04daU // Panasonic (Matsushita) +#define UHS_VID_HYPERTEC_PTY 0x04dbU // Hypertec Pty, Ltd +#define UHS_VID_HUAN_HSIN_HOLDINGS 0x04dcU // Huan Hsin Holdings, Ltd +#define UHS_VID_SHARP 0x04ddU // Sharp Corp. +#define UHS_VID_MINDSHARE 0x04deU // MindShare, Inc. +#define UHS_VID_INTERLINK_ELECTRONICS 0x04dfU // Interlink Electronics +#define UHS_VID_IIYAMA_NORTH_AMERICA 0x04e1U // Iiyama North America, Inc. +#define UHS_VID_EXAR 0x04e2U // Exar Corp. +#define UHS_VID_ZILOG 0x04e3U // Zilog, Inc. +#define UHS_VID_ACC_MICROELECTRONICS 0x04e4U // ACC Microelectronics +#define UHS_VID_PROMISE_TECHNOLOGY 0x04e5U // Promise Technology +#define UHS_VID_SCM_MICROSYSTEMS 0x04e6U // SCM Microsystems, Inc. +#define UHS_VID_ELO_TOUCHSYSTEMS 0x04e7U // Elo TouchSystems +#define UHS_VID_SAMSUNG_ELECTRONICS 0x04e8U // Samsung Electronics Co., Ltd +#define UHS_VID_PC_TEL 0x04e9U // PC-Tel, Inc. +#define UHS_VID_BROOKTREE 0x04eaU // Brooktree Corp. +#define UHS_VID_NORTHSTAR_SYSTEMS 0x04ebU // Northstar Systems, Inc. +#define UHS_VID_TOKYO_ELECTRON_DEVICE 0x04ecU // Tokyo Electron Device, Ltd +#define UHS_VID_ANNABOOKS 0x04edU // Annabooks +#define UHS_VID_PACIFIC_ELECTRONIC_INTERNATIONAL 0x04efU // Pacific Electronic International, Inc. +#define UHS_VID_DAEWOO_ELECTRONICS 0x04f0U // Daewoo Electronics Co., Ltd +#define UHS_VID_VICTOR_COMPANY_OF_JAPAN 0x04f1U // Victor Company of Japan, Ltd +#define UHS_VID_CHICONY_ELECTRONICS_1 0x04f2U // Chicony Electronics Co., Ltd +#define UHS_VID_ELAN_MICROELECTRONICS 0x04f3U // Elan Microelectronics Corp. +#define UHS_VID_HARTING_ELEKTRONIK 0x04f4U // Harting Elektronik, Inc. +#define UHS_VID_FUJITSU_ICL_SYSTEMS 0x04f5U // Fujitsu-ICL Systems, Inc. +#define UHS_VID_NORAND 0x04f6U // Norand Corp. +#define UHS_VID_NEWNEX_TECHNOLOGY 0x04f7U // Newnex Technology Corp. +#define UHS_VID_FUTUREPLUS_SYSTEMS 0x04f8U // FuturePlus Systems +#define UHS_VID_BROTHER_INDUSTRIES 0x04f9U // Brother Industries, Ltd +#define UHS_VID_DALLAS_SEMICONDUCTOR 0x04faU // Dallas Semiconductor +#define UHS_VID_BIOSTAR_MICROTECH_INTERNATIONAL 0x04fbU // Biostar Microtech International Corp. +#define UHS_VID_SUNPLUS_TECHNOLOGY 0x04fcU // Sunplus Technology Co., Ltd +#define UHS_VID_SOLITON_SYSTEMS_KK 0x04fdU // Soliton Systems, K.K. +#define UHS_VID_PFU 0x04feU // PFU, Ltd +#define UHS_VID_E_CMOS 0x04ffU // E-CMOS Corp. +#define UHS_VID_SIAM_UNITED_HI_TECH 0x0500U // Siam United Hi-Tech +#define UHS_VID_FUJIKURA_DDK 0x0501U // Fujikura DDK, Ltd +#define UHS_VID_ACER_1 0x0502U // Acer, Inc. +#define UHS_VID_HITACHI_AMERICA 0x0503U // Hitachi America, Ltd +#define UHS_VID_HAYES_MICROCOMPUTER_PRODUCTS 0x0504U // Hayes Microcomputer Products +#define UHS_VID_3COM 0x0506U // 3Com Corp. +#define UHS_VID_HOSIDEN 0x0507U // Hosiden Corp. +#define UHS_VID_CLARION 0x0508U // Clarion Co., Ltd +#define UHS_VID_AZTECH_SYSTEMS 0x0509U // Aztech Systems, Ltd +#define UHS_VID_CINCH_CONNECTORS 0x050aU // Cinch Connectors +#define UHS_VID_CABLE_SYSTEM_INTERNATIONAL 0x050bU // Cable System International +#define UHS_VID_INNOMEDIA 0x050cU // InnoMedia, Inc. +#define UHS_VID_BELKIN_COMPONENTS 0x050dU // Belkin Components +#define UHS_VID_NEON_TECHNOLOGY 0x050eU // Neon Technology, Inc. +#define UHS_VID_KC_TECHNOLOGY 0x050fU // KC Technology, Inc. +#define UHS_VID_SEJIN_ELECTRON 0x0510U // Sejin Electron, Inc. +#define UHS_VID_NABLE_DATABOOK_TECHNOLOGIES 0x0511U // N'Able (DataBook) Technologies, Inc. +#define UHS_VID_HUALON_MICROELECTRONICS 0x0512U // Hualon Microelectronics Corp. +#define UHS_VID_DIGITAL_X 0x0513U // digital-X, Inc. +#define UHS_VID_FCI_ELECTRONICS 0x0514U // FCI Electronics +#define UHS_VID_ACTC 0x0515U // ACTC +#define UHS_VID_LONGWELL_ELECTRONICS 0x0516U // Longwell Electronics +#define UHS_VID_BUTTERFLY_COMMUNICATIONS 0x0517U // Butterfly Communications +#define UHS_VID_EZKEY 0x0518U // EzKEY Corp. +#define UHS_VID_STAR_MICRONICS 0x0519U // Star Micronics Co., Ltd +#define UHS_VID_WYSE_TECHNOLOGY 0x051aU // WYSE Technology +#define UHS_VID_SILICON_GRAPHICS 0x051bU // Silicon Graphics +#define UHS_VID_SHUTTLE 0x051cU // Shuttle, Inc. +#define UHS_VID_AMERICAN_POWER_CONVERSION 0x051dU // American Power Conversion +#define UHS_VID_SCIENTIFIC_ATLANTA 0x051eU // Scientific Atlanta, Inc. +#define UHS_VID_IO_SYSTEMS_ELITE_ELECTRONICS 0x051fU // IO Systems (Elite Electronics), Inc. +#define UHS_VID_TAIWAN_SEMICONDUCTOR_MANUFACTURING 0x0520U // Taiwan Semiconductor Manufacturing Co. +#define UHS_VID_AIRBORN_CONNECTORS 0x0521U // Airborn Connectors +#define UHS_VID_ADVANCED_CONNECTEK 0x0522U // Advanced Connectek, Inc. +#define UHS_VID_ATEN 0x0523U // ATEN GmbH +#define UHS_VID_SOLA_ELECTRONICS 0x0524U // Sola Electronics +#define UHS_VID_NETCHIP_TECHNOLOGY 0x0525U // Netchip Technology, Inc. +#define UHS_VID_TEMIC_MHS 0x0526U // Temic MHS S.A. +#define UHS_VID_ALTRA 0x0527U // ALTRA +#define UHS_VID_ATI_TECHNOLOGIES 0x0528U // ATI Technologies, Inc. +#define UHS_VID_ALADDIN_KNOWLEDGE_SYSTEMS 0x0529U // Aladdin Knowledge Systems +#define UHS_VID_CRESCENT_HEART_SOFTWARE 0x052aU // Crescent Heart Software +#define UHS_VID_TEKOM_TECHNOLOGIES 0x052bU // Tekom Technologies, Inc. +#define UHS_VID_CANON_INFORMATION_SYSTEMS 0x052cU // Canon Information Systems, Inc. +#define UHS_VID_AVID_ELECTRONICS 0x052dU // Avid Electronics Corp. +#define UHS_VID_STANDARD_MICROSYSTEMS_1 0x052eU // Standard Microsystems Corp. +#define UHS_VID_UNICORE_SOFTWARE 0x052fU // Unicore Software, Inc. +#define UHS_VID_AMERICAN_MICROSYSTEMS 0x0530U // American Microsystems, Inc. +#define UHS_VID_WACOM_TECHNOLOGY 0x0531U // Wacom Technology Corp. +#define UHS_VID_SYSTECH 0x0532U // Systech Corp. +#define UHS_VID_ALCATEL_MOBILE_PHONES 0x0533U // Alcatel Mobile Phones +#define UHS_VID_MOTOROLA 0x0534U // Motorola, Inc. +#define UHS_VID_LIH_TZU_ELECTRIC 0x0535U // LIH TZU Electric Co., Ltd +#define UHS_VID_HAND_HELD_PRODUCTS_WELCH_ALLYN 0x0536U // Hand Held Products (Welch Allyn, Inc.) +#define UHS_VID_INVENTEC 0x0537U // Inventec Corp. +#define UHS_VID_CALDERA_INTERNATIONAL_INC_SCO 0x0538U // Caldera International, Inc. (SCO) +#define UHS_VID_SHYH_SHIUN_TERMINALS 0x0539U // Shyh Shiun Terminals Co., Ltd +#define UHS_VID_PREHKEYTEC 0x053aU // PrehKeyTec GmbH +#define UHS_VID_GLOBAL_VILLAGE_COMMUNICATION 0x053bU // Global Village Communication +#define UHS_VID_INSTITUT_OF_MICROELECTRONIC_AND_MECHATRONIC_SYSTEMS 0x053cU // Institut of Microelectronic & Mechatronic Systems +#define UHS_VID_SILICON_ARCHITECT 0x053dU // Silicon Architect +#define UHS_VID_MOBILITY_ELECTRONICS 0x053eU // Mobility Electronics +#define UHS_VID_SYNOPSYS_1 0x053fU // Synopsys, Inc. +#define UHS_VID_UNIACCESS 0x0540U // UniAccess AB +#define UHS_VID_SIRF_TECHNOLOGY 0x0541U // Sirf Technology, Inc. +#define UHS_VID_VIEWSONIC 0x0543U // ViewSonic Corp. +#define UHS_VID_CRISTIE_ELECTRONICS 0x0544U // Cristie Electronics, Ltd +#define UHS_VID_XIRLINK 0x0545U // Xirlink, Inc. +#define UHS_VID_POLAROID 0x0546U // Polaroid Corp. +#define UHS_VID_ANCHOR_CHIPS 0x0547U // Anchor Chips, Inc. +#define UHS_VID_TYAN_COMPUTER 0x0548U // Tyan Computer Corp. +#define UHS_VID_PIXERA 0x0549U // Pixera Corp. +#define UHS_VID_FUJITSU_MICROELECTRONICS 0x054aU // Fujitsu Microelectronics, Inc. +#define UHS_VID_NEW_MEDIA 0x054bU // New Media Corp. +#define UHS_VID_SONY 0x054cU // Sony Corp. +#define UHS_VID_TRY 0x054dU // Try Corp. +#define UHS_VID_PROSIDE 0x054eU // Proside Corp. +#define UHS_VID_WYSE_TECHNOLOGY_TAIWAN 0x054fU // WYSE Technology Taiwan +#define UHS_VID_FUJI_XEROX 0x0550U // Fuji Xerox Co., Ltd +#define UHS_VID_COMPUTREND_SYSTEMS 0x0551U // CompuTrend Systems, Inc. +#define UHS_VID_PHILIPS_MONITORS 0x0552U // Philips Monitors +#define UHS_VID_STMICROELECTRONICS_IMAGING_DIVISION_VLSI_VISION 0x0553U // STMicroelectronics Imaging Division (VLSI Vision) +#define UHS_VID_DICTAPHONE 0x0554U // Dictaphone Corp. +#define UHS_VID_ANAM_SANDT 0x0555U // ANAM S&T Co., Ltd +#define UHS_VID_ASAHI_KASEI_MICROSYSTEMS 0x0556U // Asahi Kasei Microsystems Co., Ltd +#define UHS_VID_ATEN_INTERNATIONAL 0x0557U // ATEN International Co., Ltd +#define UHS_VID_TRUEVISION 0x0558U // Truevision, Inc. +#define UHS_VID_CADENCE_DESIGN_SYSTEMS 0x0559U // Cadence Design Systems, Inc. +#define UHS_VID_KENWOOD_USA 0x055aU // Kenwood USA +#define UHS_VID_KNOWLEDGETEK 0x055bU // KnowledgeTek, Inc. +#define UHS_VID_PROTON_ELECTRONIC_IND 0x055cU // Proton Electronic Ind. +#define UHS_VID_SAMSUNG_ELECTRO_MECHANICS 0x055dU // Samsung Electro-Mechanics Co. +#define UHS_VID_CTX_OPTO_ELECTRONICS 0x055eU // CTX Opto-Electronics Corp. +#define UHS_VID_MUSTEK_SYSTEMS 0x055fU // Mustek Systems, Inc. +#define UHS_VID_INTERFACE 0x0560U // Interface Corp. +#define UHS_VID_OASIS_DESIGN 0x0561U // Oasis Design, Inc. +#define UHS_VID_TELEX_COMMUNICATIONS 0x0562U // Telex Communications, Inc. +#define UHS_VID_IMMERSION 0x0563U // Immersion Corp. +#define UHS_VID_KODAK_DIGITAL_PRODUCT_CENTER_JAPAN_LTD_FORMERLY_CHINON_INDUSTRIES 0x0564U // Kodak Digital Product Center, Japan Ltd. (formerly Chinon Industries Inc.) +#define UHS_VID_PERACOM_NETWORKS 0x0565U // Peracom Networks, Inc. +#define UHS_VID_MONTEREY_INTERNATIONAL 0x0566U // Monterey International Corp. +#define UHS_VID_XYRATEX_INTERNATIONAL 0x0567U // Xyratex International, Ltd +#define UHS_VID_QUARTZ_INGENIERIE 0x0568U // Quartz Ingenierie +#define UHS_VID_SEGASOFT 0x0569U // SegaSoft +#define UHS_VID_WACOM 0x056aU // Wacom Co., Ltd +#define UHS_VID_DECICON 0x056bU // Decicon, Inc. +#define UHS_VID_ETEK_LABS 0x056cU // eTEK Labs +#define UHS_VID_EIZO 0x056dU // EIZO Corp. +#define UHS_VID_ELECOM 0x056eU // Elecom Co., Ltd +#define UHS_VID_KOREA_DATA_SYSTEMS 0x056fU // Korea Data Systems Co., Ltd +#define UHS_VID_EPSON_AMERICA 0x0570U // Epson America +#define UHS_VID_INTEREX 0x0571U // Interex, Inc. +#define UHS_VID_CONEXANT_SYSTEMS_ROCKWELL 0x0572U // Conexant Systems (Rockwell), Inc. +#define UHS_VID_ZORAN_CO_PERSONAL_MEDIA_DIVISION_NOGATECH 0x0573U // Zoran Co. Personal Media Division (Nogatech) +#define UHS_VID_CITY_UNIVERSITY_OF_HONG_KONG 0x0574U // City University of Hong Kong +#define UHS_VID_PHILIPS_CREATIVE_DISPLAY_SOLUTIONS 0x0575U // Philips Creative Display Solutions +#define UHS_VID_BAFOQUALITY_COMPUTER_ACCESSORIES 0x0576U // BAFO/Quality Computer Accessories +#define UHS_VID_ELSA 0x0577U // ELSA +#define UHS_VID_INTRINSIX 0x0578U // Intrinsix Corp. +#define UHS_VID_GVC 0x0579U // GVC Corp. +#define UHS_VID_SAMSUNG_ELECTRONICS_AMERICA 0x057aU // Samsung Electronics America +#define UHS_VID_Y_E_DATA 0x057bU // Y-E Data, Inc. +#define UHS_VID_AVM 0x057cU // AVM GmbH +#define UHS_VID_SHARK_MULTIMEDIA 0x057dU // Shark Multimedia, Inc. +#define UHS_VID_NINTENDO 0x057eU // Nintendo Co., Ltd +#define UHS_VID_QUICKSHOT 0x057fU // QuickShot, Ltd +#define UHS_VID_DENRON 0x0580U // Denron, Inc. +#define UHS_VID_RACAL_DATA_GROUP 0x0581U // Racal Data Group +#define UHS_VID_ROLAND 0x0582U // Roland Corp. +#define UHS_VID_PADIX_CO_LTD_ROCKFIRE 0x0583U // Padix Co., Ltd (Rockfire) +#define UHS_VID_RATOC_SYSTEM 0x0584U // RATOC System, Inc. +#define UHS_VID_FLASHPOINT_TECHNOLOGY 0x0585U // FlashPoint Technology, Inc. +#define UHS_VID_ZYXEL_COMMUNICATIONS 0x0586U // ZyXEL Communications Corp. +#define UHS_VID_AMERICA_KOTOBUKI_ELECTRONICS_INDUSTRIES 0x0587U // America Kotobuki Electronics Industries, Inc. +#define UHS_VID_SAPIEN_DESIGN 0x0588U // Sapien Design +#define UHS_VID_VICTRON 0x0589U // Victron +#define UHS_VID_NOHAU 0x058aU // Nohau Corp. +#define UHS_VID_INFINEON_TECHNOLOGIES 0x058bU // Infineon Technologies +#define UHS_VID_IN_FOCUS_SYSTEMS 0x058cU // In Focus Systems +#define UHS_VID_MICREL_SEMICONDUCTOR 0x058dU // Micrel Semiconductor +#define UHS_VID_TRIPATH_TECHNOLOGY 0x058eU // Tripath Technology, Inc. +#define UHS_VID_ALCOR_MICRO 0x058fU // Alcor Micro Corp. +#define UHS_VID_OMRON 0x0590U // Omron Corp. +#define UHS_VID_QUESTRA_CONSULTING 0x0591U // Questra Consulting +#define UHS_VID_POWERWARE 0x0592U // Powerware Corp. +#define UHS_VID_INCITE 0x0593U // Incite +#define UHS_VID_PRINCETON_GRAPHIC_SYSTEMS 0x0594U // Princeton Graphic Systems +#define UHS_VID_ZORAN_MICROELECTRONICS 0x0595U // Zoran Microelectronics, Ltd +#define UHS_VID_MICROTOUCH_SYSTEMS 0x0596U // MicroTouch Systems, Inc. +#define UHS_VID_TRISIGNAL_COMMUNICATIONS 0x0597U // Trisignal Communications +#define UHS_VID_NIIGATA_CANOTEC 0x0598U // Niigata Canotec Co., Inc. +#define UHS_VID_BRILLIANCE_SEMICONDUCTOR 0x0599U // Brilliance Semiconductor, Inc. +#define UHS_VID_SPECTRUM_SIGNAL_PROCESSING 0x059aU // Spectrum Signal Processing, Inc. +#define UHS_VID_IOMEGA 0x059bU // Iomega Corp. +#define UHS_VID_A_TREND_TECHNOLOGY 0x059cU // A-Trend Technology Co., Ltd +#define UHS_VID_ADVANCED_INPUT_DEVICES 0x059dU // Advanced Input Devices +#define UHS_VID_INTELLIGENT_INSTRUMENTATION 0x059eU // Intelligent Instrumentation +#define UHS_VID_LACIE 0x059fU // LaCie, Ltd +#define UHS_VID_VETRONIX 0x05a0U // Vetronix Corp. +#define UHS_VID_USC 0x05a1U // USC Corp. +#define UHS_VID_FUJI_FILM_MICRODEVICES 0x05a2U // Fuji Film Microdevices Co., Ltd +#define UHS_VID_ARC_INTERNATIONAL 0x05a3U // ARC International +#define UHS_VID_ORTEK_TECHNOLOGY 0x05a4U // Ortek Technology, Inc. +#define UHS_VID_SAMPO_TECHNOLOGY 0x05a5U // Sampo Technology Corp. +#define UHS_VID_CISCO_SYSTEMS 0x05a6U // Cisco Systems, Inc. +#define UHS_VID_BOSE 0x05a7U // Bose Corp. +#define UHS_VID_SPACETEC_IMC 0x05a8U // Spacetec IMC Corp. +#define UHS_VID_OMNIVISION_TECHNOLOGIES 0x05a9U // OmniVision Technologies, Inc. +#define UHS_VID_UTILUX_SOUTH_CHINA 0x05aaU // Utilux South China, Ltd +#define UHS_VID_IN_SYSTEM_DESIGN 0x05abU // In-System Design +#define UHS_VID_APPLE 0x05acU // Apple, Inc. +#define UHS_VID_YC_CABLE_USA 0x05adU // Y.C. Cable U.S.A., Inc. +#define UHS_VID_SYNOPSYS_2 0x05aeU // Synopsys, Inc. +#define UHS_VID_JING_MOLD_ENTERPRISE 0x05afU // Jing-Mold Enterprise Co., Ltd +#define UHS_VID_FOUNTAIN_TECHNOLOGIES 0x05b0U // Fountain Technologies, Inc. +#define UHS_VID_FIRST_INTERNATIONAL_COMPUTER 0x05b1U // First International Computer, Inc. +#define UHS_VID_LG_SEMICON 0x05b4U // LG Semicon Co., Ltd +#define UHS_VID_DIALOGIC 0x05b5U // Dialogic Corp. +#define UHS_VID_PROXIMA 0x05b6U // Proxima Corp. +#define UHS_VID_MEDIANIX_SEMICONDUCTOR 0x05b7U // Medianix Semiconductor, Inc. +#define UHS_VID_AGILER 0x05b8U // Agiler, Inc. +#define UHS_VID_PHILIPS_RESEARCH_LABORATORIES 0x05b9U // Philips Research Laboratories +#define UHS_VID_DIGITALPERSONA 0x05baU // DigitalPersona, Inc. +#define UHS_VID_GREY_CELL_SYSTEMS 0x05bbU // Grey Cell Systems +#define UHS_VID_3G_GREEN_GREEN_GLOBE 0x05bcU // 3G Green Green Globe Co., Ltd +#define UHS_VID_RAFI_GMBH_AND_CO_KG 0x05bdU // RAFI GmbH & Co. KG +#define UHS_VID_TYCO_ELECTRONICS_RAYCHEM 0x05beU // Tyco Electronics (Raychem) +#define UHS_VID_S_AND_S_RESEARCH 0x05bfU // S & S Research +#define UHS_VID_KEIL_SOFTWARE 0x05c0U // Keil Software +#define UHS_VID_KAWASAKI_MICROELECTRONICS 0x05c1U // Kawasaki Microelectronics, Inc. +#define UHS_VID_MEDIA_PHONICS_SUISSE 0x05c2U // Media Phonics (Suisse) S.A. +#define UHS_VID_DIGI_INTERNATIONAL_1 0x05c5U // Digi International, Inc. +#define UHS_VID_QUALCOMM 0x05c6U // Qualcomm, Inc. +#define UHS_VID_QTRONIX 0x05c7U // Qtronix Corp. +#define UHS_VID_CHENG_UEI_PRECISION_INDUSTRY_CO_LTD_FOXLINK 0x05c8U // Cheng Uei Precision Industry Co., Ltd (Foxlink) +#define UHS_VID_SEMTECH_1 0x05c9U // Semtech Corp. +#define UHS_VID_RICOH 0x05caU // Ricoh Co., Ltd +#define UHS_VID_POWERVISION_TECHNOLOGIES 0x05cbU // PowerVision Technologies, Inc. +#define UHS_VID_ELSA_AG 0x05ccU // ELSA AG +#define UHS_VID_SILICOM 0x05cdU // Silicom, Ltd +#define UHS_VID_SCI_WORX 0x05ceU // sci-worx GmbH +#define UHS_VID_SUNG_FORN 0x05cfU // Sung Forn Co., Ltd +#define UHS_VID_GE_MEDICAL_SYSTEMS_LUNAR 0x05d0U // GE Medical Systems Lunar +#define UHS_VID_BRAINBOXES 0x05d1U // Brainboxes, Ltd +#define UHS_VID_WAVE_SYSTEMS 0x05d2U // Wave Systems Corp. +#define UHS_VID_TOHOKU_RICOH 0x05d3U // Tohoku Ricoh Co., Ltd +#define UHS_VID_SUPER_GATE_TECHNOLOGY 0x05d5U // Super Gate Technology Co., Ltd +#define UHS_VID_PHILIPS_SEMICONDUCTORS_CICT 0x05d6U // Philips Semiconductors, CICT +#define UHS_VID_THOMAS_AND_BETTS 0x05d7U // Thomas & Betts Corp. +#define UHS_VID_ULTIMA_ELECTRONICS 0x05d8U // Ultima Electronics Corp. +#define UHS_VID_AXIOHM_TRANSACTION_SOLUTIONS 0x05d9U // Axiohm Transaction Solutions +#define UHS_VID_MICROTEK_INTERNATIONAL 0x05daU // Microtek International, Inc. +#define UHS_VID_SUN_CORP_SUNTAC_UNKNOWN 0x05dbU // Sun Corp. (Suntac?) +#define UHS_VID_LEXAR_MEDIA 0x05dcU // Lexar Media, Inc. +#define UHS_VID_DELTA_ELECTRONICS 0x05ddU // Delta Electronics, Inc. +#define UHS_VID_SILICON_VISION 0x05dfU // Silicon Vision, Inc. +#define UHS_VID_SYMBOL_TECHNOLOGIES 0x05e0U // Symbol Technologies +#define UHS_VID_SYNTEK_SEMICONDUCTOR 0x05e1U // Syntek Semiconductor Co., Ltd +#define UHS_VID_ELECVISION 0x05e2U // ElecVision, Inc. +#define UHS_VID_GENESYS_LOGIC 0x05e3U // Genesys Logic, Inc. +#define UHS_VID_RED_WING 0x05e4U // Red Wing Corp. +#define UHS_VID_FUJI_ELECTRIC 0x05e5U // Fuji Electric Co., Ltd +#define UHS_VID_KEITHLEY_INSTRUMENTS 0x05e6U // Keithley Instruments +#define UHS_VID_ICC 0x05e8U // ICC, Inc. +#define UHS_VID_KAWASAKI_LSI 0x05e9U // Kawasaki LSI +#define UHS_VID_FFC 0x05ebU // FFC, Ltd +#define UHS_VID_COM21 0x05ecU // COM21, Inc. +#define UHS_VID_CYTECHINFO 0x05eeU // Cytechinfo Inc. +#define UHS_VID_AVB_INC_ANKO_UNKNOWN_ 0x05efU // AVB, Inc. [anko?] +#define UHS_VID_CANOPUS 0x05f0U // Canopus Co., Ltd +#define UHS_VID_COMPASS_COMMUNICATIONS 0x05f1U // Compass Communications +#define UHS_VID_DEXIN 0x05f2U // Dexin Corp., Ltd +#define UHS_VID_PI_ENGINEERING 0x05f3U // PI Engineering, Inc. +#define UHS_VID_UNIXTAR_TECHNOLOGY 0x05f5U // Unixtar Technology, Inc. +#define UHS_VID_AOC_INTERNATIONAL 0x05f6U // AOC International +#define UHS_VID_RFC_DISTRIBUTIONS_PTE 0x05f7U // RFC Distribution(s) PTE, Ltd +#define UHS_VID_PSC_SCANNING 0x05f9U // PSC Scanning, Inc. +#define UHS_VID_SIEMENS_TELECOMMUNICATIONS_SYSTEMS 0x05faU // Siemens Telecommunications Systems, Ltd +#define UHS_VID_HARMAN 0x05fcU // Harman +#define UHS_VID_INTERACT 0x05fdU // InterAct, Inc. +#define UHS_VID_CHIC_TECHNOLOGY 0x05feU // Chic Technology Corp. +#define UHS_VID_LECROY 0x05ffU // LeCroy Corp. +#define UHS_VID_BARCO_DISPLAY_SYSTEMS 0x0600U // Barco Display Systems +#define UHS_VID_JAZZ_HIPSTER 0x0601U // Jazz Hipster Corp. +#define UHS_VID_VISTA_IMAGING 0x0602U // Vista Imaging, Inc. +#define UHS_VID_NOVATEK_MICROELECTRONICS 0x0603U // Novatek Microelectronics Corp. +#define UHS_VID_JEAN 0x0604U // Jean Co., Ltd +#define UHS_VID_ANCHOR_CANDC 0x0605U // Anchor C&C Co., Ltd +#define UHS_VID_ROYAL_INFORMATION_ELECTRONICS 0x0606U // Royal Information Electronics Co., Ltd +#define UHS_VID_BRIDGE_INFORMATION 0x0607U // Bridge Information Co., Ltd +#define UHS_VID_GENRAD_ADS 0x0608U // Genrad Ads +#define UHS_VID_SMK_MANUFACTURING 0x0609U // SMK Manufacturing, Inc. +#define UHS_VID_WORTHINGTON_DATA_SOLUTIONS 0x060aU // Worthington Data Solutions, Inc. +#define UHS_VID_SOLID_YEAR 0x060bU // Solid Year +#define UHS_VID_EEH_DATALINK 0x060cU // EEH Datalink GmbH +#define UHS_VID_AUCTOR 0x060dU // Auctor Corp. +#define UHS_VID_TRANSMONDE_TECHNOLOGIES 0x060eU // Transmonde Technologies, Inc. +#define UHS_VID_JOINSOON_ELECTRONICS_MFG 0x060fU // Joinsoon Electronics Mfg. Co., Ltd +#define UHS_VID_COSTAR_ELECTRONICS 0x0610U // Costar Electronics, Inc. +#define UHS_VID_TOTOKU_ELECTRIC 0x0611U // Totoku Electric Co., Ltd +#define UHS_VID_TRANSACT_TECHNOLOGIES 0x0613U // TransAct Technologies, Inc. +#define UHS_VID_BIO_RAD_LABORATORIES 0x0614U // Bio-Rad Laboratories +#define UHS_VID_QUABBIN_WIRE_AND_CABLE 0x0615U // Quabbin Wire & Cable Co., Inc. +#define UHS_VID_FUTURE_TECHNO_DESIGNS_PVT 0x0616U // Future Techno Designs PVT, Ltd +#define UHS_VID_SWISS_FEDERAL_INSITUTE_OF_TECHNOLOGY 0x0617U // Swiss Federal Insitute of Technology +#define UHS_VID_MACALLY 0x0618U // MacAlly +#define UHS_VID_SEIKO_INSTRUMENTS 0x0619U // Seiko Instruments, Inc. +#define UHS_VID_VERIDICOM_INTERNATIONAL 0x061aU // Veridicom International, Inc. +#define UHS_VID_PROMPTUS_COMMUNICATIONS 0x061bU // Promptus Communications, Inc. +#define UHS_VID_ACT_LABS 0x061cU // Act Labs, Ltd +#define UHS_VID_QUATECH 0x061dU // Quatech, Inc. +#define UHS_VID_NISSEI_ELECTRIC 0x061eU // Nissei Electric Co. +#define UHS_VID_ALARIS 0x0620U // Alaris, Inc. +#define UHS_VID_ODU_STECKVERBINDUNGSSYSTEME_GMBH_AND_CO_KG 0x0621U // ODU-Steckverbindungssysteme GmbH & Co. KG +#define UHS_VID_IOTECH 0x0622U // Iotech, Inc. +#define UHS_VID_LITTELFUSE 0x0623U // Littelfuse, Inc. +#define UHS_VID_AVOCENT 0x0624U // Avocent Corp. +#define UHS_VID_TIMEDIA_TECHNOLOGY 0x0625U // TiMedia Technology Co., Ltd +#define UHS_VID_NIPPON_SYSTEMS_DEVELOPMENT 0x0626U // Nippon Systems Development Co., Ltd +#define UHS_VID_ADOMAX_TECHNOLOGY 0x0627U // Adomax Technology Co., Ltd +#define UHS_VID_TASKING_SOFTWARE 0x0628U // Tasking Software, Inc. +#define UHS_VID_ZIDA_TECHNOLOGIES 0x0629U // Zida Technologies, Ltd +#define UHS_VID_CREATIVE_LABS 0x062aU // Creative Labs +#define UHS_VID_GREATLINK_ELECTRONICS_TAIWAN 0x062bU // Greatlink Electronics Taiwan, Ltd +#define UHS_VID_INSTITUTE_FOR_INFORMATION_INDUSTRY 0x062cU // Institute for Information Industry +#define UHS_VID_TAIWAN_TAI_HAO_ENTERPRISES 0x062dU // Taiwan Tai-Hao Enterprises Co., Ltd +#define UHS_VID_MAINSUPER_ENTERPRISES 0x062eU // Mainsuper Enterprises Co., Ltd +#define UHS_VID_SIN_SHENG_TERMINAL_AND_MACHINE 0x062fU // Sin Sheng Terminal & Machine, Inc. +#define UHS_VID_JUJO_ELECTRONICS 0x0631U // JUJO Electronics Corp. +#define UHS_VID_CYRIX 0x0633U // Cyrix Corp. +#define UHS_VID_MICRON_TECHNOLOGY 0x0634U // Micron Technology, Inc. +#define UHS_VID_METHODE_ELECTRONICS 0x0635U // Methode Electronics, Inc. +#define UHS_VID_SIERRA_IMAGING 0x0636U // Sierra Imaging, Inc. +#define UHS_VID_AVISION 0x0638U // Avision, Inc. +#define UHS_VID_CHRONTEL 0x0639U // Chrontel, Inc. +#define UHS_VID_TECHWIN 0x063aU // Techwin Corp. +#define UHS_VID_TAUGAGREINING_HF_1 0x063bU // Taugagreining HF +#define UHS_VID_YAMAICHI_ELECTRONICS_CO_LTD_SAKURA 0x063cU // Yamaichi Electronics Co., Ltd (Sakura) +#define UHS_VID_FONG_KAI_INDUSTRIAL 0x063dU // Fong Kai Industrial Co., Ltd +#define UHS_VID_REALMEDIA_TECHNOLOGY 0x063eU // RealMedia Technology, Inc. +#define UHS_VID_NEW_TECHNOLOGY_CABLE 0x063fU // New Technology Cable, Ltd +#define UHS_VID_HITEX_DEVELOPMENT_TOOLS 0x0640U // Hitex Development Tools +#define UHS_VID_WOODS_INDUSTRIES 0x0641U // Woods Industries, Inc. +#define UHS_VID_VIA_MEDICAL 0x0642U // VIA Medical Corp. +#define UHS_VID_TEAC 0x0644U // TEAC Corp. +#define UHS_VID_WHO_UNKNOWN_VISION_SYSTEMS 0x0645U // Who? Vision Systems, Inc. +#define UHS_VID_UMAX 0x0646U // UMAX +#define UHS_VID_ACTON_RESEARCH 0x0647U // Acton Research Corp. +#define UHS_VID_INSIDE_OUT_NETWORKS 0x0648U // Inside Out Networks +#define UHS_VID_WELI_SCIENCE 0x0649U // Weli Science Co., Ltd +#define UHS_VID_ANALOG_DEVICES_INC_WHITE_MOUNTAIN_DSP 0x064bU // Analog Devices, Inc. (White Mountain DSP) +#define UHS_VID_JI_HAW_INDUSTRIAL 0x064cU // Ji-Haw Industrial Co., Ltd +#define UHS_VID_TRITECH_MICROELECTRONICS 0x064dU // TriTech Microelectronics, Ltd +#define UHS_VID_SUYIN 0x064eU // Suyin Corp. +#define UHS_VID_WIBU_SYSTEMS_AG 0x064fU // WIBU-Systems AG +#define UHS_VID_DYNAPRO_SYSTEMS 0x0650U // Dynapro Systems +#define UHS_VID_LIKOM_TECHNOLOGY_SDN_BHD 0x0651U // Likom Technology Sdn. Bhd. +#define UHS_VID_STARGATE_SOLUTIONS 0x0652U // Stargate Solutions, Inc. +#define UHS_VID_CNF 0x0653U // CNF, Inc. +#define UHS_VID_GRANITE_MICROSYSTEMS 0x0654U // Granite Microsystems, Inc. +#define UHS_VID_SPACE_SHUTTLE_HI_TECH 0x0655U // Space Shuttle Hi-Tech Co., Ltd +#define UHS_VID_GLORY_MARK_ELECTRONIC 0x0656U // Glory Mark Electronic, Ltd +#define UHS_VID_TEKCON_ELECTRONICS 0x0657U // Tekcon Electronics Corp. +#define UHS_VID_SIGMA_DESIGNS 0x0658U // Sigma Designs, Inc. +#define UHS_VID_AETHRA 0x0659U // Aethra +#define UHS_VID_OPTOELECTRONICS 0x065aU // Optoelectronics Co., Ltd +#define UHS_VID_TRACEWELL_SYSTEMS 0x065bU // Tracewell Systems +#define UHS_VID_SILICON_GRAPHICS_1 0x065eU // Silicon Graphics +#define UHS_VID_GOOD_WAY_TECHNOLOGY_CO_LTD_AND_GWC_TECHNOLOGY 0x065fU // Good Way Technology Co., Ltd & GWC technology Inc. +#define UHS_VID_TSAY_E_BVI_INTERNATIONAL 0x0660U // TSAY-E (BVI) International, Inc. +#define UHS_VID_HAMAMATSU_PHOTONICS_KK 0x0661U // Hamamatsu Photonics K.K. +#define UHS_VID_KANSAI_ELECTRIC 0x0662U // Kansai Electric Co., Ltd +#define UHS_VID_TOPMAX_ELECTRONIC 0x0663U // Topmax Electronic Co., Ltd +#define UHS_VID_ETANDT_TECHNOLOGY 0x0664U // ET&T Technology Co., Ltd. +#define UHS_VID_CYPRESS_SEMICONDUCTOR_1 0x0665U // Cypress Semiconductor +#define UHS_VID_AIWA 0x0667U // Aiwa Co., Ltd +#define UHS_VID_WORDWAND 0x0668U // WordWand +#define UHS_VID_OCE_PRINTING_SYSTEMS 0x0669U // Oce' Printing Systems GmbH +#define UHS_VID_TOTAL_TECHNOLOGIES 0x066aU // Total Technologies, Ltd +#define UHS_VID_LINKSYS 0x066bU // Linksys, Inc. +#define UHS_VID_ENTREGA 0x066dU // Entrega, Inc. +#define UHS_VID_ACER_SEMICONDUCTOR_AMERICA 0x066eU // Acer Semiconductor America, Inc. +#define UHS_VID_SIGMATEL 0x066fU // SigmaTel, Inc. +#define UHS_VID_SEQUEL_IMAGING 0x0670U // Sequel Imaging +#define UHS_VID_LABTEC 0x0672U // Labtec, Inc. +#define UHS_VID_HCL 0x0673U // HCL +#define UHS_VID_KEY_MOUSE_ELECTRONIC_ENTERPRISE 0x0674U // Key Mouse Electronic Enterprise Co., Ltd +#define UHS_VID_DRAYTEK 0x0675U // DrayTek Corp. +#define UHS_VID_TELES_AG 0x0676U // Teles AG +#define UHS_VID_AIWA_1 0x0677U // Aiwa Co., Ltd +#define UHS_VID_ACARD_TECHNOLOGY 0x0678U // ACard Technology Corp. +#define UHS_VID_PROLIFIC_TECHNOLOGY 0x067bU // Prolific Technology, Inc. +#define UHS_VID_EFFICIENT_NETWORKS 0x067cU // Efficient Networks, Inc. +#define UHS_VID_HOHNER 0x067dU // Hohner Corp. +#define UHS_VID_INTERMEC_TECHNOLOGIES 0x067eU // Intermec Technologies Corp. +#define UHS_VID_VIRATA 0x067fU // Virata, Ltd +#define UHS_VID_REALTEK_SEMICONDUCTOR_CORP_CPP_DIV_AVANCE_LOGIC 0x0680U // Realtek Semiconductor Corp., CPP Div. (Avance Logic) +#define UHS_VID_SIEMENS_INFORMATION_AND_COMMUNICATION_PRODUCTS 0x0681U // Siemens Information and Communication Products +#define UHS_VID_VICTOR_COMPANY_OF_JAPAN_1 0x0682U // Victor Company of Japan, Ltd +#define UHS_VID_ACTIONTEC_ELECTRONICS 0x0684U // Actiontec Electronics, Inc. +#define UHS_VID_ZD_INCORPORATED 0x0685U // ZD Incorporated +#define UHS_VID_MINOLTA 0x0686U // Minolta Co., Ltd +#define UHS_VID_PERTECH 0x068aU // Pertech, Inc. +#define UHS_VID_POTRANS_INTERNATIONAL 0x068bU // Potrans International, Inc. +#define UHS_VID_CH_PRODUCTS 0x068eU // CH Products, Inc. +#define UHS_VID_GOLDEN_BRIDGE_ELECTECH 0x0690U // Golden Bridge Electech, Inc. +#define UHS_VID_HAGIWARA_SYS_COM 0x0693U // Hagiwara Sys-Com Co., Ltd +#define UHS_VID_LEGO_GROUP 0x0694U // Lego Group +#define UHS_VID_CHUNTEX_CTX 0x0698U // Chuntex (CTX) +#define UHS_VID_TEKTRONIX 0x0699U // Tektronix, Inc. +#define UHS_VID_ASKEY_COMPUTER 0x069aU // Askey Computer Corp. +#define UHS_VID_THOMSON 0x069bU // Thomson, Inc. +#define UHS_VID_HUGHES_NETWORK_SYSTEMS_HNS 0x069dU // Hughes Network Systems (HNS) +#define UHS_VID_WELCAT 0x069eU // Welcat Inc. +#define UHS_VID_ALLIED_DATA_TECHNOLOGIES_BV 0x069fU // Allied Data Technologies BV +#define UHS_VID_TOPRO_TECHNOLOGY 0x06a2U // Topro Technology, Inc. +#define UHS_VID_SAITEK_PLC 0x06a3U // Saitek PLC +#define UHS_VID_XIAMEN_DOOWELL_ELECTRON 0x06a4U // Xiamen Doowell Electron Co., Ltd +#define UHS_VID_DIVIO 0x06a5U // Divio +#define UHS_VID_MICROSTORE 0x06a7U // MicroStore, Inc. +#define UHS_VID_TOPAZ_SYSTEMS 0x06a8U // Topaz Systems, Inc. +#define UHS_VID_WESTELL 0x06a9U // Westell +#define UHS_VID_SYSGRATION 0x06aaU // Sysgration, Ltd +#define UHS_VID_FUJITSU_LABORATORIES_OF_AMERICA 0x06acU // Fujitsu Laboratories of America, Inc. +#define UHS_VID_GREATLAND_ELECTRONICS_TAIWAN 0x06adU // Greatland Electronics Taiwan, Ltd +#define UHS_VID_PROFESSIONAL_MULTIMEDIA_TESTING_CENTRE 0x06aeU // Professional Multimedia Testing Centre +#define UHS_VID_HARTING_INC_OF_NORTH_AMERICA 0x06afU // Harting, Inc. of North America +#define UHS_VID_PIXELA 0x06b8U // Pixela Corp. +#define UHS_VID_ALCATEL_TELECOM 0x06b9U // Alcatel Telecom +#define UHS_VID_SMOOTH_CORD_AND_CONNECTOR 0x06baU // Smooth Cord & Connector Co., Ltd +#define UHS_VID_EDA 0x06bbU // EDA, Inc. +#define UHS_VID_OKI_DATA 0x06bcU // Oki Data Corp. +#define UHS_VID_AGFA_GEVAERT_NV 0x06bdU // AGFA-Gevaert NV +#define UHS_VID_AME_OPTIMEDIA_TECHNOLOGY 0x06beU // AME Optimedia Technology Co., Ltd +#define UHS_VID_LEOCO 0x06bfU // Leoco Corp. +#define UHS_VID_PHIDGETS_INC_FORMERLY_GLAB 0x06c2U // Phidgets Inc. (formerly GLAB) +#define UHS_VID_BIZLINK_INTERNATIONAL 0x06c4U // Bizlink International Corp. +#define UHS_VID_HAGENUK 0x06c5U // Hagenuk, GmbH +#define UHS_VID_INFOWAVE_SOFTWARE 0x06c6U // Infowave Software, Inc. +#define UHS_VID_SIIG 0x06c8U // SIIG, Inc. +#define UHS_VID_TAXAN_EUROPE 0x06c9U // Taxan (Europe), Ltd +#define UHS_VID_NEWER_TECHNOLOGY 0x06caU // Newer Technology, Inc. +#define UHS_VID_SYNAPTICS 0x06cbU // Synaptics, Inc. +#define UHS_VID_TERAYON_COMMUNICATION_SYSTEMS 0x06ccU // Terayon Communication Systems +#define UHS_VID_KEYSPAN 0x06cdU // Keyspan +#define UHS_VID_CONTEC 0x06ceU // Contec +#define UHS_VID_SPHERONVR_AG 0x06cfU // SpheronVR AG +#define UHS_VID_LAPLINK 0x06d0U // LapLink, Inc. +#define UHS_VID_DAEWOO_ELECTRONICS_1 0x06d1U // Daewoo Electronics Co., Ltd +#define UHS_VID_MITSUBISHI_ELECTRIC 0x06d3U // Mitsubishi Electric Corp. +#define UHS_VID_CISCO_SYSTEMS_1 0x06d4U // Cisco Systems +#define UHS_VID_TOSHIBA 0x06d5U // Toshiba +#define UHS_VID_AASHIMA_TECHNOLOGY_BV 0x06d6U // Aashima Technology B.V. +#define UHS_VID_NETWORK_COMPUTING_DEVICES_NCD 0x06d7U // Network Computing Devices (NCD) +#define UHS_VID_TECHNICAL_MARKETING_RESEARCH 0x06d8U // Technical Marketing Research, Inc. +#define UHS_VID_PHOENIXTEC_POWER 0x06daU // Phoenixtec Power Co., Ltd +#define UHS_VID_PARADYNE 0x06dbU // Paradyne +#define UHS_VID_FOXLINK_IMAGE_TECHNOLOGY 0x06dcU // Foxlink Image Technology Co., Ltd +#define UHS_VID_HEISEI_ELECTRONICS 0x06deU // Heisei Electronics Co., Ltd +#define UHS_VID_MULTI_TECH_SYSTEMS 0x06e0U // Multi-Tech Systems, Inc. +#define UHS_VID_ADS_TECHNOLOGIES 0x06e1U // ADS Technologies, Inc. +#define UHS_VID_ALCATEL_MICROELECTRONICS 0x06e4U // Alcatel Microelectronics +#define UHS_VID_TIGER_JET_NETWORK 0x06e6U // Tiger Jet Network, Inc. +#define UHS_VID_SIRIUS_TECHNOLOGIES 0x06eaU // Sirius Technologies +#define UHS_VID_PC_EXPERT_TECH 0x06ebU // PC Expert Tech. Co., Ltd +#define UHS_VID_IAC_GEOMETRISCHE_INGENIEURS_BV 0x06efU // I.A.C. Geometrische Ingenieurs B.V. +#define UHS_VID_TNC_INDUSTRIAL 0x06f0U // T.N.C Industrial Co., Ltd +#define UHS_VID_OPCODE_SYSTEMS 0x06f1U // Opcode Systems, Inc. +#define UHS_VID_EMINE_TECHNOLOGY 0x06f2U // Emine Technology Co. +#define UHS_VID_WINTREND_TECHNOLOGY 0x06f6U // Wintrend Technology Co., Ltd +#define UHS_VID_WAILLY_TECHNOLOGY 0x06f7U // Wailly Technology Ltd +#define UHS_VID_GUILLEMOT 0x06f8U // Guillemot Corp. +#define UHS_VID_ASYST_ELECTRONIC_DOO 0x06f9U // ASYST electronic d.o.o. +#define UHS_VID_HSD_SRL 0x06faU // HSD S.r.L +#define UHS_VID_MOTOROLA_SEMICONDUCTOR_PRODUCTS_SECTOR 0x06fcU // Motorola Semiconductor Products Sector +#define UHS_VID_BOSTON_ACOUSTICS 0x06fdU // Boston Acoustics +#define UHS_VID_GALLANT_COMPUTER 0x06feU // Gallant Computer, Inc. +#define UHS_VID_SUPERCOMAL_WIRE_AND_CABLE_SDN_BHD 0x0701U // Supercomal Wire & Cable SDN. BHD. +#define UHS_VID_BVTECH_INDUSTRY 0x0703U // Bvtech Industry, Inc. +#define UHS_VID_NKK 0x0705U // NKK Corp. +#define UHS_VID_ARIEL 0x0706U // Ariel Corp. +#define UHS_VID_STANDARD_MICROSYSTEMS_2 0x0707U // Standard Microsystems Corp. +#define UHS_VID_PUTERCOM 0x0708U // Putercom Co., Ltd +#define UHS_VID_SILICON_SYSTEMS_LTD_SSL 0x0709U // Silicon Systems, Ltd (SSL) +#define UHS_VID_OKI_ELECTRIC_INDUSTRY 0x070aU // Oki Electric Industry Co., Ltd +#define UHS_VID_COMOSS_ELECTRONIC 0x070dU // Comoss Electronic Co., Ltd +#define UHS_VID_EXCEL_CELL_ELECTRONIC 0x070eU // Excel Cell Electronic Co., Ltd +#define UHS_VID_CONNECT_TECH 0x0710U // Connect Tech, Inc. +#define UHS_VID_MAGIC_CONTROL_TECHNOLOGY 0x0711U // Magic Control Technology Corp. +#define UHS_VID_INTERVAL_RESEARCH 0x0713U // Interval Research Corp. +#define UHS_VID_NEWMOTION 0x0714U // NewMotion, Inc. +#define UHS_VID_ZNK 0x0717U // ZNK Corp. +#define UHS_VID_IMATION 0x0718U // Imation Corp. +#define UHS_VID_TREMON_ENTERPRISES 0x0719U // Tremon Enterprises Co., Ltd +#define UHS_VID_DOMAIN_TECHNOLOGIES 0x071bU // Domain Technologies, Inc. +#define UHS_VID_XIONICS_DOCUMENT_TECHNOLOGIES 0x071cU // Xionics Document Technologies, Inc. +#define UHS_VID_EICON_NETWORKS 0x071dU // Eicon Networks Corp. +#define UHS_VID_ARISTON_TECHNOLOGIES 0x071eU // Ariston Technologies +#define UHS_VID_CENTILLIUM_COMMUNICATIONS 0x0723U // Centillium Communications Corp. +#define UHS_VID_VANGUARD_INTERNATIONAL_SEMICONDUCTOR_AMERICA 0x0726U // Vanguard International Semiconductor-America +#define UHS_VID_AMITM 0x0729U // Amitm +#define UHS_VID_SUNIX 0x072eU // Sunix Co., Ltd +#define UHS_VID_ADVANCED_CARD_SYSTEMS 0x072fU // Advanced Card Systems, Ltd +#define UHS_VID_SUSTEEN 0x0731U // Susteen, Inc. +#define UHS_VID_GOLDFULL_ELECTRONICS_AND_TELECOMMUNICATIONS 0x0732U // Goldfull Electronics & Telecommunications Corp. +#define UHS_VID_VIEWQUEST_TECHNOLOGIES 0x0733U // ViewQuest Technologies, Inc. +#define UHS_VID_LASAT_COMMUNICATIONS_AS 0x0734U // Lasat Communications A/S +#define UHS_VID_ASUSCOM_NETWORK 0x0735U // Asuscom Network +#define UHS_VID_LOROM_INDUSTRIAL 0x0736U // Lorom Industrial Co., Ltd +#define UHS_VID_MAD_CATZ 0x0738U // Mad Catz, Inc. +#define UHS_VID_CHAPLET_SYSTEMS 0x073aU // Chaplet Systems, Inc. +#define UHS_VID_SUNCOM_TECHNOLOGIES 0x073bU // Suncom Technologies +#define UHS_VID_INDUSTRIAL_ELECTRONIC_ENGINEERS 0x073cU // Industrial Electronic Engineers, Inc. +#define UHS_VID_EUTRON_SPA 0x073dU // Eutron S.p.a. +#define UHS_VID_NEC_1 0x073eU // NEC, Inc. +#define UHS_VID_STOLLMANN 0x0742U // Stollmann +#define UHS_VID_SYNTECH_INFORMATION 0x0745U // Syntech Information Co., Ltd +#define UHS_VID_ONKYO 0x0746U // Onkyo Corp. +#define UHS_VID_LABWAY 0x0747U // Labway Corp. +#define UHS_VID_STRONG_MAN_ENTERPRISE 0x0748U // Strong Man Enterprise Co., Ltd +#define UHS_VID_EVER_ELECTRONICS 0x0749U // EVer Electronics Corp. +#define UHS_VID_MING_FORTUNE_INDUSTRY 0x074aU // Ming Fortune Industry Co., Ltd +#define UHS_VID_POLESTAR_TECH 0x074bU // Polestar Tech. Corp. +#define UHS_VID_C_C_C_GROUP_PLC 0x074cU // C-C-C Group PLC +#define UHS_VID_MICRONAS 0x074dU // Micronas GmbH +#define UHS_VID_DIGITAL_STREAM 0x074eU // Digital Stream Corp. +#define UHS_VID_AUREAL_SEMICONDUCTOR 0x0755U // Aureal Semiconductor +#define UHS_VID_NETWORK_TECHNOLOGIES 0x0757U // Network Technologies, Inc. +#define UHS_VID_SOPHISTICATED_CIRCUITS 0x075bU // Sophisticated Circuits, Inc. +#define UHS_VID_MIDIMAN 0x0763U // Midiman +#define UHS_VID_CYBER_POWER_SYSTEM 0x0764U // Cyber Power System, Inc. +#define UHS_VID_X_RITE 0x0765U // X-Rite, Inc. +#define UHS_VID_JESS_LINK_PRODUCTS 0x0766U // Jess-Link Products Co., Ltd +#define UHS_VID_TOKHEIM 0x0767U // Tokheim Corp. +#define UHS_VID_CAMTEL_TECHNOLOGY 0x0768U // Camtel Technology Corp. +#define UHS_VID_SURECOM_TECHNOLOGY 0x0769U // Surecom Technology Corp. +#define UHS_VID_SMART_TECHNOLOGY_ENABLERS 0x076aU // Smart Technology Enablers, Inc. +#define UHS_VID_OMNIKEY_AG 0x076bU // OmniKey AG +#define UHS_VID_PARTNER_TECH 0x076cU // Partner Tech +#define UHS_VID_DENSO 0x076dU // Denso Corp. +#define UHS_VID_KUAN_TECH_ENTERPRISE 0x076eU // Kuan Tech Enterprise Co., Ltd +#define UHS_VID_JHEN_VEI_ELECTRONIC 0x076fU // Jhen Vei Electronic Co., Ltd +#define UHS_VID_WELCH_ALLYN_INC__MEDICAL_DIVISION 0x0770U // Welch Allyn, Inc - Medical Division +#define UHS_VID_OBSERVATOR_INSTRUMENTS_BV 0x0771U // Observator Instruments BV +#define UHS_VID_YOUR_DATA_OUR_CARE 0x0772U // Your data Our Care +#define UHS_VID_AMTRAN_TECHNOLOGY 0x0774U // AmTRAN Technology Co., Ltd +#define UHS_VID_LONGSHINE_ELECTRONICS 0x0775U // Longshine Electronics Corp. +#define UHS_VID_INALWAYS 0x0776U // Inalways Corp. +#define UHS_VID_COMDA_ENTERPRISE 0x0777U // Comda Enterprise Corp. +#define UHS_VID_VOLEX 0x0778U // Volex, Inc. +#define UHS_VID_FAIRCHILD_SEMICONDUCTOR 0x0779U // Fairchild Semiconductor +#define UHS_VID_SANKYO_SEIKI_MFG 0x077aU // Sankyo Seiki Mfg. Co., Ltd +#define UHS_VID_LINKSYS_1 0x077bU // Linksys +#define UHS_VID_FORWARD_ELECTRONICS 0x077cU // Forward Electronics Co., Ltd +#define UHS_VID_GRIFFIN_TECHNOLOGY 0x077dU // Griffin Technology +#define UHS_VID_WELL_EXCELLENT_AND_MOST 0x077fU // Well Excellent & Most Corp. +#define UHS_VID_SAGEM_MONETEL 0x0780U // Sagem Monetel GmbH +#define UHS_VID_SANDISK 0x0781U // SanDisk Corp. +#define UHS_VID_TRACKERBALL 0x0782U // Trackerball +#define UHS_VID_C3PO 0x0783U // C3PO +#define UHS_VID_VIVITAR 0x0784U // Vivitar, Inc. +#define UHS_VID_NTT_ME 0x0785U // NTT-ME +#define UHS_VID_LOGITEC 0x0789U // Logitec Corp. +#define UHS_VID_HAPP_CONTROLS 0x078bU // Happ Controls, Inc. +#define UHS_VID_GTCOCALCOMP 0x078cU // GTCO/CalComp +#define UHS_VID_BRINCOM 0x078eU // Brincom, Inc. +#define UHS_VID_PRO_IMAGE_MANUFACTURING 0x0790U // Pro-Image Manufacturing Co., Ltd +#define UHS_VID_COPARTNER_WIRE_AND_CABLE_MFG 0x0791U // Copartner Wire and Cable Mfg. Corp. +#define UHS_VID_AXIS_COMMUNICATIONS 0x0792U // Axis Communications AB +#define UHS_VID_WHA_YU_INDUSTRIAL 0x0793U // Wha Yu Industrial Co., Ltd +#define UHS_VID_ABL_ELECTRONICS 0x0794U // ABL Electronics Corp. +#define UHS_VID_REALCHIP 0x0795U // RealChip, Inc. +#define UHS_VID_CERTICOM 0x0796U // Certicom Corp. +#define UHS_VID_GRANDTECH_SEMICONDUCTOR 0x0797U // Grandtech Semiconductor Corp. +#define UHS_VID_OPTELEC 0x0798U // Optelec +#define UHS_VID_ALTERA 0x0799U // Altera +#define UHS_VID_SAGEM 0x079bU // Sagem +#define UHS_VID_ALFADATA_COMPUTER 0x079dU // Alfadata Computer Corp. +#define UHS_VID_DIGICOM_SPA 0x07a1U // Digicom S.p.A. +#define UHS_VID_NATIONAL_TECHNICAL_SYSTEMS 0x07a2U // National Technical Systems +#define UHS_VID_ONNTO 0x07a3U // Onnto Corp. +#define UHS_VID_BE 0x07a4U // Be, Inc. +#define UHS_VID_ADMTEK 0x07a6U // ADMtek, Inc. +#define UHS_VID_COREGA_KK 0x07aaU // Corega K.K. +#define UHS_VID_FREECOM_TECHNOLOGIES 0x07abU // Freecom Technologies +#define UHS_VID_MICROTECH 0x07afU // Microtech +#define UHS_VID_TRUST_TECHNOLOGIES 0x07b0U // Trust Technologies +#define UHS_VID_IMP 0x07b1U // IMP, Inc. +#define UHS_VID_MOTOROLA_BCS 0x07b2U // Motorola BCS, Inc. +#define UHS_VID_PLUSTEK 0x07b3U // Plustek, Inc. +#define UHS_VID_OLYMPUS_OPTICAL 0x07b4U // Olympus Optical Co., Ltd +#define UHS_VID_MEGA_WORLD_INTERNATIONAL 0x07b5U // Mega World International, Ltd +#define UHS_VID_MARUBUN 0x07b6U // Marubun Corp. +#define UHS_VID_TIME_INTERCONNECT 0x07b7U // TIME Interconnect, Ltd +#define UHS_VID_ABOCOM_SYSTEMS 0x07b8U // AboCom Systems Inc +#define UHS_VID_CANON_COMPUTER_SYSTEMS 0x07bcU // Canon Computer Systems, Inc. +#define UHS_VID_WEBGEAR 0x07bdU // Webgear, Inc. +#define UHS_VID_VERIDICOM 0x07beU // Veridicom +#define UHS_VID_CODE_MERCENARIES_HARD_UND_SOFTWARE 0x07c0U // Code Mercenaries Hard- und Software GmbH +#define UHS_VID_KEISOKUGIKEN 0x07c1U // Keisokugiken +#define UHS_VID_DATAFAB_SYSTEMS 0x07c4U // Datafab Systems, Inc. +#define UHS_VID_APG_CASH_DRAWER 0x07c5U // APG Cash Drawer +#define UHS_VID_SHAREWAVE 0x07c6U // ShareWave, Inc. +#define UHS_VID_POWERTECH_INDUSTRIAL 0x07c7U // Powertech Industrial Co., Ltd +#define UHS_VID_BUG 0x07c8U // B.U.G., Inc. +#define UHS_VID_ALLIED_TELESYN_INTERNATIONAL 0x07c9U // Allied Telesyn International +#define UHS_VID_AVERMEDIA_TECHNOLOGIES 0x07caU // AVerMedia Technologies, Inc. +#define UHS_VID_KINGMAX_TECHNOLOGY 0x07cbU // Kingmax Technology, Inc. +#define UHS_VID_CARRY_COMPUTER_ENG 0x07ccU // Carry Computer Eng., Co., Ltd +#define UHS_VID_ELEKTOR 0x07cdU // Elektor +#define UHS_VID_CASIO_COMPUTER 0x07cfU // Casio Computer Co., Ltd +#define UHS_VID_DAZZLE 0x07d0U // Dazzle +#define UHS_VID_D_LINK_SYSTEM 0x07d1U // D-Link System +#define UHS_VID_APTIO_PRODUCTS 0x07d2U // Aptio Products, Inc. +#define UHS_VID_CYBERDATA 0x07d3U // Cyberdata Corp. +#define UHS_VID_RADIANT_SYSTEMS 0x07d5U // Radiant Systems +#define UHS_VID_GCC_TECHNOLOGIES 0x07d7U // GCC Technologies, Inc. +#define UHS_VID_ARASAN_CHIP_SYSTEMS 0x07daU // Arasan Chip Systems +#define UHS_VID_DIAMOND_MULTIMEDIA 0x07deU // Diamond Multimedia +#define UHS_VID_DAVID_ELECTRONICS 0x07dfU // David Electronics Co., Ltd +#define UHS_VID_AMBIENT_TECHNOLOGIES 0x07e1U // Ambient Technologies, Inc. +#define UHS_VID_ELMEG_GMBH_AND 0x07e2U // Elmeg GmbH & Co., Ltd +#define UHS_VID_PLANEX_COMMUNICATIONS 0x07e3U // Planex Communications, Inc. +#define UHS_VID_MOVADO_ENTERPRISE 0x07e4U // Movado Enterprise Co., Ltd +#define UHS_VID_QPS 0x07e5U // QPS, Inc. +#define UHS_VID_ALLIED_CABLE 0x07e6U // Allied Cable Corp. +#define UHS_VID_MIRVO_TOYS 0x07e7U // Mirvo Toys, Inc. +#define UHS_VID_LABSYSTEMS 0x07e8U // Labsystems +#define UHS_VID_IWATSU_ELECTRIC 0x07eaU // Iwatsu Electric Co., Ltd +#define UHS_VID_DOUBLE_H_TECHNOLOGY 0x07ebU // Double-H Technology Co., Ltd +#define UHS_VID_TAIYO_ELECTRIC_WIRE_AND_CABLE 0x07ecU // Taiyo Electric Wire & Cable Co., Ltd +#define UHS_VID_TOREX_RETAIL_FORMERLY_LOGWARE 0x07eeU // Torex Retail (formerly Logware) +#define UHS_VID_STSN 0x07efU // STSN +#define UHS_VID_MICROCOMPUTER_APPLICATIONS 0x07f2U // Microcomputer Applications, Inc. +#define UHS_VID_CIRCUIT_ASSEMBLY 0x07f6U // Circuit Assembly Corp. +#define UHS_VID_CENTURY 0x07f7U // Century Corp. +#define UHS_VID_DOTOP_TECHNOLOGY 0x07f9U // Dotop Technology, Inc. +#define UHS_VID_DRAYTEK_1 0x07faU // DrayTek Corp. +#define UHS_VID_MARK_OF_THE_UNICORN 0x07fdU // Mark of the Unicorn +#define UHS_VID_UNKNOWN_2 0x07ffU // Unknown +#define UHS_VID_MAGTEK 0x0801U // MagTek +#define UHS_VID_MAKO_TECHNOLOGIES 0x0802U // Mako Technologies, LLC +#define UHS_VID_ZOOM_TELEPHONICS 0x0803U // Zoom Telephonics, Inc. +#define UHS_VID_GENICOM_TECHNOLOGY 0x0809U // Genicom Technology, Inc. +#define UHS_VID_EVERMUCH_TECHNOLOGY 0x080aU // Evermuch Technology Co., Ltd +#define UHS_VID_CROSS_MATCH_TECHNOLOGIES 0x080bU // Cross Match Technologies +#define UHS_VID_DATALOGIC_SPA 0x080cU // Datalogic S.p.A. +#define UHS_VID_TECO_IMAGE_SYSTEMS 0x080dU // Teco Image Systems Co., Ltd +#define UHS_VID_PERSONAL_COMMUNICATION_SYSTEMS 0x0810U // Personal Communication Systems, Inc. +#define UHS_VID_MATTEL 0x0813U // Mattel, Inc. +#define UHS_VID_ELICENSER 0x0819U // eLicenser +#define UHS_VID_MG_LOGIC 0x081aU // MG Logic +#define UHS_VID_INDIGITA 0x081bU // Indigita Corp. +#define UHS_VID_MIPSYS 0x081cU // Mipsys +#define UHS_VID_ALPHASMART 0x081eU // AlphaSmart, Inc. +#define UHS_VID_REUDO 0x0822U // Reudo Corp. +#define UHS_VID_GC_PROTRONICS 0x0825U // GC Protronics +#define UHS_VID_DATA_TRANSIT 0x0826U // Data Transit +#define UHS_VID_BROADLOGIC 0x0827U // BroadLogic, Inc. +#define UHS_VID_SATO 0x0828U // Sato Corp. +#define UHS_VID_DIRECTV_BROADBAND_INC_TELOCITY 0x0829U // DirecTV Broadband, Inc. (Telocity) +#define UHS_VID_HANDSPRING 0x082dU // Handspring +#define UHS_VID_PALM 0x0830U // Palm, Inc. +#define UHS_VID_KOUWELL_ELECTRONICS 0x0832U // Kouwell Electronics Corp. +#define UHS_VID_SOURCENEXT 0x0833U // Sourcenext Corp. +#define UHS_VID_ACTION_STAR_ENTERPRISE 0x0835U // Action Star Enterprise Co., Ltd +#define UHS_VID_TREKSTOR 0x0836U // TrekStor +#define UHS_VID_SAMSUNG_TECHWIN 0x0839U // Samsung Techwin Co., Ltd +#define UHS_VID_ACCTON_TECHNOLOGY 0x083aU // Accton Technology Corp. +#define UHS_VID_GLOBAL_VILLAGE 0x083fU // Global Village +#define UHS_VID_ARGOSY_RESEARCH 0x0840U // Argosy Research, Inc. +#define UHS_VID_RIOPORTCOM 0x0841U // Rioport.com, Inc. +#define UHS_VID_WELLAND_INDUSTRIAL 0x0844U // Welland Industrial Co., Ltd +#define UHS_VID_NETGEAR 0x0846U // NetGear, Inc. +#define UHS_VID_MINTON_OPTIC_INDUSTRY 0x084dU // Minton Optic Industry Co., Inc. +#define UHS_VID_KB_GEAR 0x084eU // KB Gear +#define UHS_VID_EMPEG 0x084fU // Empeg +#define UHS_VID_FAST_POINT_TECHNOLOGIES 0x0850U // Fast Point Technologies, Inc. +#define UHS_VID_MACRONIX_INTERNATIONAL 0x0851U // Macronix International Co., Ltd +#define UHS_VID_CSEM 0x0852U // CSEM +#define UHS_VID_TOPRE_CORPORATION 0x0853U // Topre Corporation +#define UHS_VID_ACTIVEWIRE 0x0854U // ActiveWire, Inc. +#define UHS_VID_BANDB_ELECTRONICS 0x0856U // B&B Electronics +#define UHS_VID_HITACHI_MAXELL 0x0858U // Hitachi Maxell, Ltd +#define UHS_VID_MINOLTA_SYSTEMS_LABORATORY 0x0859U // Minolta Systems Laboratory, Inc. +#define UHS_VID_XIRCOM 0x085aU // Xircom +#define UHS_VID_COLORVISION 0x085cU // ColorVision, Inc. +#define UHS_VID_TELETROL_SYSTEMS 0x0862U // Teletrol Systems, Inc. +#define UHS_VID_FILANET 0x0863U // Filanet Corp. +#define UHS_VID_NETGEAR_1 0x0864U // NetGear, Inc. +#define UHS_VID_DATA_TRANSLATION 0x0867U // Data Translation, Inc. +#define UHS_VID_EMAGIC_SOFT_UND_HARDWARE 0x086aU // Emagic Soft- und Hardware GmbH +#define UHS_VID_DETEWE__DEUTSCHE_TELEPHONWERKE_AG_AND 0x086cU // DeTeWe - Deutsche Telephonwerke AG & Co. +#define UHS_VID_SYSTEM_TALKS 0x086eU // System TALKS, Inc. +#define UHS_VID_MEC_IMEX 0x086fU // MEC IMEX, Inc. +#define UHS_VID_METRICOM 0x0870U // Metricom +#define UHS_VID_SANDISK_1 0x0871U // SanDisk, Inc. +#define UHS_VID_XPEED 0x0873U // Xpeed, Inc. +#define UHS_VID_A_TEC_SUBSYSTEM 0x0874U // A-Tec Subsystem, Inc. +#define UHS_VID_COMTROL 0x0879U // Comtrol Corp. +#define UHS_VID_ADESSOKBTEK_AMERICA 0x087cU // Adesso/Kbtek America, Inc. +#define UHS_VID_JATON 0x087dU // Jaton Corp. +#define UHS_VID_FUJITSU_COMPUTER_PRODUCTS_OF_AMERICA 0x087eU // Fujitsu Computer Products of America +#define UHS_VID_QUALCORE_LOGIC 0x087fU // QualCore Logic Inc. +#define UHS_VID_APT_TECHNOLOGIES 0x0880U // APT Technologies, Inc. +#define UHS_VID_RECORDING_INDUSTRY_ASSOCIATION_OF_AMERICA_RIAA 0x0883U // Recording Industry Association of America (RIAA) +#define UHS_VID_BOCA_RESEARCH 0x0885U // Boca Research, Inc. +#define UHS_VID_XAC_AUTOMATION 0x0886U // XAC Automation Corp. +#define UHS_VID_HANNSTAR_ELECTRONICS 0x0887U // Hannstar Electronics Corp. +#define UHS_VID_TECHTOOLS 0x088aU // TechTools +#define UHS_VID_MASSWORKS 0x088bU // MassWorks, Inc. +#define UHS_VID_SWECOIN 0x088cU // Swecoin AB +#define UHS_VID_ILOK 0x088eU // iLok +#define UHS_VID_DIOGRAPHY 0x0892U // DioGraphy, Inc. +#define UHS_VID_TSI_INCORPORATED 0x0894U // TSI Incorporated +#define UHS_VID_LAUTERBACH 0x0897U // Lauterbach +#define UHS_VID_UNITED_TECHNOLOGIES_RESEARCH_CNTR 0x089cU // United Technologies Research Cntr. +#define UHS_VID_ICRON_TECHNOLOGIES 0x089dU // Icron Technologies Corp. +#define UHS_VID_NST 0x089eU // NST Co., Ltd +#define UHS_VID_PRIMEX_AEROSPACE 0x089fU // Primex Aerospace Co. +#define UHS_VID_E9 0x08a5U // e9, Inc. +#define UHS_VID_TOSHIBA_TEC 0x08a6U // Toshiba TEC +#define UHS_VID_ANDREA_ELECTRONICS 0x08a8U // Andrea Electronics +#define UHS_VID_CWAV 0x08a9U // CWAV Inc. +#define UHS_VID_MACRAIGOR_SYSTEMS 0x08acU // Macraigor Systems LLC +#define UHS_VID_MACALLY_MACE_GROUP 0x08aeU // Macally (Mace Group, Inc.) +#define UHS_VID_METROHM 0x08b0U // Metrohm +#define UHS_VID_SORENSON_VISION 0x08b4U // Sorenson Vision, Inc. +#define UHS_VID_NATSU 0x08b7U // NATSU +#define UHS_VID_J_GORDON_ELECTRONIC_DESIGN 0x08b8U // J. Gordon Electronic Design, Inc. +#define UHS_VID_RADIOSHACK_CORP_TANDY 0x08b9U // RadioShack Corp. (Tandy) +#define UHS_VID_TEXAS_INSTRUMENTS_1 0x08bbU // Texas Instruments +#define UHS_VID_CITIZEN_WATCH 0x08bdU // Citizen Watch Co., Ltd +#define UHS_VID_PRECISE_BIOMETRICS 0x08c3U // Precise Biometrics +#define UHS_VID_PROXIM 0x08c4U // Proxim, Inc. +#define UHS_VID_KEY_NICE_ENTERPRISE 0x08c7U // Key Nice Enterprise Co., Ltd +#define UHS_VID_2WIRE 0x08c8U // 2Wire, Inc. +#define UHS_VID_NIPPON_TELEGRAPH_AND_TELEPHONE 0x08c9U // Nippon Telegraph and Telephone Corp. +#define UHS_VID_AIPTEK_INTERNATIONAL 0x08caU // Aiptek International, Inc. +#define UHS_VID_JUE_HSUN_IND 0x08cdU // Jue Hsun Ind. Corp. +#define UHS_VID_LONG_WELL_ELECTRONICS 0x08ceU // Long Well Electronics Corp. +#define UHS_VID_PRODUCTIVITY_ENHANCEMENT_PRODUCTS 0x08cfU // Productivity Enhancement Products +#define UHS_VID_SMARTBRIDGES 0x08d1U // smartBridges, Inc. +#define UHS_VID_VIRTUAL_INK 0x08d3U // Virtual Ink +#define UHS_VID_FUJITSU_SIEMENS_COMPUTERS 0x08d4U // Fujitsu Siemens Computers +#define UHS_VID_IXXAT_AUTOMATION 0x08d8U // IXXAT Automation GmbH +#define UHS_VID_INCREMENT_P 0x08d9U // Increment P Corp. +#define UHS_VID_BILLIONTON_SYSTEMS 0x08ddU // Billionton Systems, Inc. +#define UHS_VID__UNKNOWN 0x08deU // ? +#define UHS_VID_SPYRUS 0x08dfU // Spyrus, Inc. +#define UHS_VID_OLITEC 0x08e3U // Olitec, Inc. +#define UHS_VID_PIONEER 0x08e4U // Pioneer Corp. +#define UHS_VID_LITRONIC 0x08e5U // Litronic +#define UHS_VID_GEMALTO_WAS_GEMPLUS 0x08e6U // Gemalto (was Gemplus) +#define UHS_VID_PAN_INTERNATIONAL_WIRE_AND_CABLE 0x08e7U // Pan-International Wire & Cable +#define UHS_VID_INTEGRATED_MEMORY_LOGIC 0x08e8U // Integrated Memory Logic +#define UHS_VID_EXTENDED_SYSTEMS 0x08e9U // Extended Systems, Inc. +#define UHS_VID_ERICSSON_INC_BLUE_RIDGE_LABS 0x08eaU // Ericsson, Inc., Blue Ridge Labs +#define UHS_VID_M_SYSTEMS_FLASH_DISK_PIONEERS 0x08ecU // M-Systems Flash Disk Pioneers +#define UHS_VID_MEDIATEK 0x08edU // MediaTek Inc. +#define UHS_VID_CCSIHESSO 0x08eeU // CCSI/Hesso +#define UHS_VID_COREX_TECHNOLOGIES 0x08f0U // Corex Technologies +#define UHS_VID_CTI_ELECTRONICS 0x08f1U // CTI Electronics Corp. +#define UHS_VID_GOTOP_INFORMATION 0x08f2U // Gotop Information Inc. +#define UHS_VID_SYSTEC 0x08f5U // SysTec Co., Ltd +#define UHS_VID_LOGIC_3_INTERNATIONAL 0x08f6U // Logic 3 International, Ltd +#define UHS_VID_VERNIER 0x08f7U // Vernier +#define UHS_VID_KEEN_TOP_INTERNATIONAL_ENTERPRISE 0x08f8U // Keen Top International Enterprise Co., Ltd +#define UHS_VID_WIPRO_TECHNOLOGIES 0x08f9U // Wipro Technologies +#define UHS_VID_CAERE 0x08faU // Caere +#define UHS_VID_SOCKET_COMMUNICATIONS 0x08fbU // Socket Communications +#define UHS_VID_SICON_CABLE_TECHNOLOGY 0x08fcU // Sicon Cable Technology Co., Ltd +#define UHS_VID_DIGIANSWER_AS 0x08fdU // Digianswer A/S +#define UHS_VID_AUTHENTEC 0x08ffU // AuthenTec, Inc. +#define UHS_VID_PINNACLE_SYSTEMS 0x0900U // Pinnacle Systems, Inc. +#define UHS_VID_VST_TECHNOLOGIES 0x0901U // VST Technologies +#define UHS_VID_FARADAY_TECHNOLOGY 0x0906U // Faraday Technology Corp. +#define UHS_VID_SIEMENS_AG 0x0908U // Siemens AG +#define UHS_VID_AUDIO_TECHNICA 0x0909U // Audio-Technica Corp. +#define UHS_VID_TRUMPION_MICROELECTRONICS 0x090aU // Trumpion Microelectronics, Inc. +#define UHS_VID_NEUROSMITH 0x090bU // Neurosmith +#define UHS_VID_SILICON_MOTION_INC__TAIWAN_FORMERLY_FEIYA_TECHNOLOGY 0x090cU // Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) +#define UHS_VID_MULTIPORT_COMPUTER_VERTRIEBS 0x090dU // Multiport Computer Vertriebs GmbH +#define UHS_VID_SHINING_TECHNOLOGY 0x090eU // Shining Technology, Inc. +#define UHS_VID_FUJITSU_DEVICES 0x090fU // Fujitsu Devices, Inc. +#define UHS_VID_ALATION_SYSTEMS 0x0910U // Alation Systems, Inc. +#define UHS_VID_PHILIPS_SPEECH_PROCESSING 0x0911U // Philips Speech Processing +#define UHS_VID_VOQUETTE 0x0912U // Voquette, Inc. +#define UHS_VID_GLOBESPAN 0x0915U // GlobeSpan, Inc. +#define UHS_VID_SMARTDISK 0x0917U // SmartDisk Corp. +#define UHS_VID_TIGER_ELECTRONICS 0x0919U // Tiger Electronics +#define UHS_VID_GARMIN_INTERNATIONAL 0x091eU // Garmin International +#define UHS_VID_ECHELON 0x0920U // Echelon Co. +#define UHS_VID_GOHUBS 0x0921U // GoHubs, Inc. +#define UHS_VID_DYMO_COSTAR 0x0922U // Dymo-CoStar Corp. +#define UHS_VID_IC_MEDIA 0x0923U // IC Media Corp. +#define UHS_VID_XEROX 0x0924U // Xerox +#define UHS_VID_LAKEVIEW_RESEARCH 0x0925U // Lakeview Research +#define UHS_VID_SUMMUS 0x0927U // Summus, Ltd +#define UHS_VID_PLX_TECHNOLOGY_INC_FORMERLY_OXFORD_SEMICONDUCTOR 0x0928U // PLX Technology, Inc. (formerly Oxford Semiconductor, Ltd) +#define UHS_VID_AMERICAN_BIOMETRIC 0x0929U // American Biometric Co. +#define UHS_VID_TOSHIBA_INFORMATION_AND_INDUSTRIAL_SYS_AND_SERVICES 0x092aU // Toshiba Information & Industrial Sys. And Services +#define UHS_VID_SENA_TECHNOLOGIES 0x092bU // Sena Technologies, Inc. +#define UHS_VID_NORTHERN_EMBEDDED_SCIENCECAVNEX 0x092fU // Northern Embedded Science/CAVNEX +#define UHS_VID_TOSHIBA_1 0x0930U // Toshiba Corp. +#define UHS_VID_HARMONIC_DATA_SYSTEMS 0x0931U // Harmonic Data Systems, Ltd +#define UHS_VID_CRESCENTEC 0x0932U // Crescentec Corp. +#define UHS_VID_QUANTUM 0x0933U // Quantum Corp. +#define UHS_VID_SPIRENT_COMMUNICATIONS 0x0934U // Spirent Communications +#define UHS_VID_NUTESLA 0x0936U // NuTesla +#define UHS_VID_LUMBERG 0x0939U // Lumberg, Inc. +#define UHS_VID_PIXART_IMAGING 0x093aU // Pixart Imaging, Inc. +#define UHS_VID_PLEXTOR 0x093bU // Plextor Corp. +#define UHS_VID_INTREPID_CONTROL_SYSTEMS 0x093cU // Intrepid Control Systems, Inc. +#define UHS_VID_INNOSYNC 0x093dU // InnoSync, Inc. +#define UHS_VID_JST_MFG 0x093eU // J.S.T. Mfg. Co., Ltd +#define UHS_VID_OLYMPIA_TELECOM_VERTRIEBS 0x093fU // Olympia Telecom Vertriebs GmbH +#define UHS_VID_JAPAN_STORAGE_BATTERY 0x0940U // Japan Storage Battery Co., Ltd +#define UHS_VID_PHOTOBIT 0x0941U // Photobit Corp. +#define UHS_VID_I2GOCOM 0x0942U // i2Go.com, LLC +#define UHS_VID_HCL_TECHNOLOGIES_INDIA_PRIVATE 0x0943U // HCL Technologies India Private, Ltd +#define UHS_VID_KORG 0x0944U // KORG, Inc. +#define UHS_VID_PASCO_SCIENTIFIC 0x0945U // Pasco Scientific +#define UHS_VID_KRONAUER_MUSIC_IN_DIGITAL 0x0948U // Kronauer music in digital +#define UHS_VID_LINKUP_SYSTEMS 0x094bU // Linkup Systems Corp. +#define UHS_VID_CABLE_TELEVISION_LABORATORIES 0x094dU // Cable Television Laboratories +#define UHS_VID_YANO 0x094fU // Yano +#define UHS_VID_KINGSTON_TECHNOLOGY 0x0951U // Kingston Technology +#define UHS_VID_RPM_SYSTEMS 0x0954U // RPM Systems Corp. +#define UHS_VID_NVIDIA 0x0955U // NVidia Corp. +#define UHS_VID_BSQUARE 0x0956U // BSquare Corp. +#define UHS_VID_AGILENT_TECHNOLOGIES 0x0957U // Agilent Technologies, Inc. +#define UHS_VID_COMPULINK_RESEARCH 0x0958U // CompuLink Research, Inc. +#define UHS_VID_COLOGNE_CHIP_AG 0x0959U // Cologne Chip AG +#define UHS_VID_PORTSMITH 0x095aU // Portsmith +#define UHS_VID_MEDIALOGIC 0x095bU // Medialogic Corp. +#define UHS_VID_K_TEC_ELECTRONICS 0x095cU // K-Tec Electronics +#define UHS_VID_POLYCOM 0x095dU // Polycom, Inc. +#define UHS_VID_ACER_NEWEB 0x0967U // Acer NeWeb Corp. +#define UHS_VID_CATALYST_ENTERPRISES 0x0968U // Catalyst Enterprises, Inc. +#define UHS_VID_FEITIAN_TECHNOLOGIES 0x096eU // Feitian Technologies, Inc. +#define UHS_VID_GRETAG_MACBETH_AG 0x0971U // Gretag-Macbeth AG +#define UHS_VID_SCHLUMBERGER 0x0973U // Schlumberger +#define UHS_VID_DATAGRAPHIX_A_BUSINESS_UNIT_OF_ANACOMP 0x0974U // Datagraphix, a business unit of Anacomp +#define UHS_VID_OLE_COMMUNICATIONS 0x0975U // OL'E Communications, Inc. +#define UHS_VID_ADIRONDACK_WIRE_AND_CABLE 0x0976U // Adirondack Wire & Cable +#define UHS_VID_LIGHTSURF_TECHNOLOGIES 0x0977U // Lightsurf Technologies +#define UHS_VID_BECKHOFF 0x0978U // Beckhoff GmbH +#define UHS_VID_JEILIN_TECHNOLOGY 0x0979U // Jeilin Technology Corp., Ltd +#define UHS_VID_MINDS_AT_WORK 0x097aU // Minds At Work LLC +#define UHS_VID_KNUDSEN_ENGINEERING 0x097bU // Knudsen Engineering, Ltd +#define UHS_VID_MARUNIX 0x097cU // Marunix Co., Ltd +#define UHS_VID_ROSUN_TECHNOLOGIES 0x097dU // Rosun Technologies, Inc. +#define UHS_VID_BIOPAC_SYSTEMS 0x097eU // Biopac Systems Inc. +#define UHS_VID_BARUN_ELECTRONICS 0x097fU // Barun Electronics Co., Ltd +#define UHS_VID_OAK_TECHNOLOGY_1 0x0981U // Oak Technology, Ltd +#define UHS_VID_APRICORN 0x0984U // Apricorn +#define UHS_VID_CAB_PRODUKTTECHNIK_GMBH_AND_CO_KG 0x0985U // cab Produkttechnik GmbH & Co KG +#define UHS_VID_MATSUSHITA_ELECTRIC_WORKS 0x0986U // Matsushita Electric Works, Ltd. +#define UHS_VID_VITANA 0x098cU // Vitana Corp. +#define UHS_VID_INDESIGN 0x098dU // INDesign +#define UHS_VID_INTEGRATED_INTELLECTUAL_PROPERTY 0x098eU // Integrated Intellectual Property, Inc. +#define UHS_VID_KENWOOD_TMI 0x098fU // Kenwood TMI Corp. +#define UHS_VID_GEMSTAR_EBOOK_GROUP 0x0993U // Gemstar eBook Group, Ltd +#define UHS_VID_INTEGRATED_TELECOM_EXPRESS 0x0996U // Integrated Telecom Express, Inc. +#define UHS_VID_ZIPPY_TECHNOLOGY 0x099aU // Zippy Technology Corp. +#define UHS_VID_PAIRGAIN_TECHNOLOGIES 0x09a3U // PairGain Technologies +#define UHS_VID_CONTECH_RESEARCH 0x09a4U // Contech Research, Inc. +#define UHS_VID_VCON_TELECOMMUNICATIONS 0x09a5U // VCON Telecommunications +#define UHS_VID_POINCHIPS 0x09a6U // Poinchips +#define UHS_VID_DATA_TRANSMISSION_NETWORK 0x09a7U // Data Transmission Network Corp. +#define UHS_VID_LIN_SHIUNG_ENTERPRISE 0x09a8U // Lin Shiung Enterprise Co., Ltd +#define UHS_VID_SMART_CARD_TECHNOLOGIES 0x09a9U // Smart Card Technologies Co., Ltd +#define UHS_VID_INTERSIL 0x09aaU // Intersil Corp. +#define UHS_VID_JAPAN_CASH_MACHINE 0x09abU // Japan Cash Machine Co., Ltd. +#define UHS_VID_TRIPP_LITE 0x09aeU // Tripp Lite +#define UHS_VID_FRANKLIN_ELECTRONIC_PUBLISHERS 0x09b2U // Franklin Electronic Publishers, Inc. +#define UHS_VID_ALTIUS_SOLUTIONS 0x09b3U // Altius Solutions, Inc. +#define UHS_VID_MDS_TELEPHONE_SYSTEMS 0x09b4U // MDS Telephone Systems +#define UHS_VID_CELLTRIX_TECHNOLOGY 0x09b5U // Celltrix Technology Co., Ltd +#define UHS_VID_GRUNDIG 0x09bcU // Grundig +#define UHS_VID_MYSMARTCOM 0x09beU // MySmart.Com +#define UHS_VID_AUERSWALD_GMBH_AND_CO_KG 0x09bfU // Auerswald GmbH & Co. KG +#define UHS_VID_GENPIX_ELECTRONICS 0x09c0U // Genpix Electronics, LLC +#define UHS_VID_ARRIS_INTERACTIVE 0x09c1U // Arris Interactive LLC +#define UHS_VID_NISCA 0x09c2U // Nisca Corp. +#define UHS_VID_ACTIVCARD 0x09c3U // ActivCard, Inc. +#define UHS_VID_ACTISYS 0x09c4U // ACTiSYS Corp. +#define UHS_VID_MEMORY 0x09c5U // Memory Corp. +#define UHS_VID_BMC_MESSSYSTEME 0x09caU // BMC Messsysteme GmbH +#define UHS_VID_WORKBIT 0x09ccU // Workbit Corp. +#define UHS_VID_PSION_DACOM_HOME_NETWORKS 0x09cdU // Psion Dacom Home Networks, Ltd +#define UHS_VID_CITY_ELECTRONICS 0x09ceU // City Electronics, Ltd +#define UHS_VID_ELECTRONICS_TESTING_CENTER_TAIWAN 0x09cfU // Electronics Testing Center, Taiwan +#define UHS_VID_NEOMAGIC 0x09d1U // NeoMagic, Inc. +#define UHS_VID_VREELIN_ENGINEERING 0x09d2U // Vreelin Engineering, Inc. +#define UHS_VID_COM_ONE 0x09d3U // Com One +#define UHS_VID_NOVATEL_WIRELESS 0x09d7U // Novatel Wireless +#define UHS_VID_KRF_TECH 0x09d9U // KRF Tech, Ltd +#define UHS_VID_A4TECH 0x09daU // A4Tech Co., Ltd. +#define UHS_VID_MEASUREMENT_COMPUTING 0x09dbU // Measurement Computing Corp. +#define UHS_VID_AIMEX 0x09dcU // Aimex Corp. +#define UHS_VID_FELLOWES 0x09ddU // Fellowes, Inc. +#define UHS_VID_ADDONICS_TECHNOLOGIES 0x09dfU // Addonics Technologies Corp. +#define UHS_VID_INTELLON 0x09e1U // Intellon Corp. +#define UHS_VID_JO_DAN_INTERNATIONAL 0x09e5U // Jo-Dan International, Inc. +#define UHS_VID_SILUTIA 0x09e6U // Silutia, Inc. +#define UHS_VID_REAL_3D 0x09e7U // Real 3D, Inc. +#define UHS_VID_AKAI_PROFESSIONAL_MI 0x09e8U // AKAI Professional M.I. Corp. +#define UHS_VID_CHEN_SOURCE 0x09e9U // Chen-Source, Inc. +#define UHS_VID_IM_NETWORKS 0x09ebU // IM Networks, Inc. +#define UHS_VID_XITEL 0x09efU // Xitel +#define UHS_VID_GOFLIGHT 0x09f3U // GoFlight, Inc. +#define UHS_VID_ARESCOM 0x09f5U // AresCom +#define UHS_VID_ROCKETCHIPS 0x09f6U // RocketChips, Inc. +#define UHS_VID_EDU_SCIENCE_HK 0x09f7U // Edu-Science (H.K.), Ltd +#define UHS_VID_SOFTCONNEX_TECHNOLOGIES 0x09f8U // SoftConnex Technologies, Inc. +#define UHS_VID_BAY_ASSOCIATES 0x09f9U // Bay Associates +#define UHS_VID_MTEK_VISION 0x09faU // Mtek Vision +#define UHS_VID_ALTERA_1 0x09fbU // Altera +#define UHS_VID_GAIN_TECHNOLOGY 0x09ffU // Gain Technology Corp. +#define UHS_VID_LIQUID_AUDIO 0x0a00U // Liquid Audio +#define UHS_VID_VIA 0x0a01U // ViA, Inc. +#define UHS_VID_UNKNOWN_MANUFACTURER 0x0a05U // Unknown Manufacturer +#define UHS_VID_ONTRAK_CONTROL_SYSTEMS 0x0a07U // Ontrak Control Systems Inc. +#define UHS_VID_CYBEX_COMPUTER_PRODUCTS 0x0a0bU // Cybex Computer Products Co. +#define UHS_VID_SERVERGY 0x0a0dU // Servergy, Inc +#define UHS_VID_XENTEC 0x0a11U // Xentec, Inc. +#define UHS_VID_CAMBRIDGE_SILICON_RADIO 0x0a12U // Cambridge Silicon Radio, Ltd +#define UHS_VID_TELEBYTE 0x0a13U // Telebyte, Inc. +#define UHS_VID_SPACELABS_MEDICAL 0x0a14U // Spacelabs Medical, Inc. +#define UHS_VID_SCALAR 0x0a15U // Scalar Corp. +#define UHS_VID_TREK_TECHNOLOGY_S_PTE 0x0a16U // Trek Technology (S) PTE, Ltd +#define UHS_VID_PENTAX 0x0a17U // Pentax Corp. +#define UHS_VID_HEIDELBERGER_DRUCKMASCHINEN_AG 0x0a18U // Heidelberger Druckmaschinen AG +#define UHS_VID_HUA_GENG_TECHNOLOGIES 0x0a19U // Hua Geng Technologies, Inc. +#define UHS_VID_MEDTRONIC_PHYSIO_CONTROL 0x0a21U // Medtronic Physio Control Corp. +#define UHS_VID_CENTURY_SEMICONDUCTOR_USA 0x0a22U // Century Semiconductor USA, Inc. +#define UHS_VID_DATACARD_GROUP 0x0a27U // Datacard Group +#define UHS_VID_AK_MODUL_BUS_COMPUTER 0x0a2cU // AK-Modul-Bus Computer GmbH +#define UHS_VID_TG3_ELECTRONICS 0x0a34U // TG3 Electronics, Inc. +#define UHS_VID_RADIKAL_TECHNOLOGIES 0x0a35U // Radikal Technologies +#define UHS_VID_GILAT_SATELLITE_NETWORKS 0x0a39U // Gilat Satellite Networks, Ltd +#define UHS_VID_PENTAMEDIA 0x0a3aU // PentaMedia Co., Ltd +#define UHS_VID_NTT_DOCOMO 0x0a3cU // NTT DoCoMo, Inc. +#define UHS_VID_VARO_VISION 0x0a3dU // Varo Vision +#define UHS_VID_SWISSONIC_AG 0x0a3fU // Swissonic AG +#define UHS_VID_BOCA_SYSTEMS 0x0a43U // Boca Systems, Inc. +#define UHS_VID_DAVICOM_SEMICONDUCTOR 0x0a46U // Davicom Semiconductor, Inc. +#define UHS_VID_HIROSE_ELECTRIC 0x0a47U // Hirose Electric +#define UHS_VID_IO_INTERCONNECT 0x0a48U // I/O Interconnect +#define UHS_VID_PLOYTEC 0x0a4aU // Ploytec GmbH +#define UHS_VID_FUJITSU_MEDIA_DEVICES 0x0a4bU // Fujitsu Media Devices, Ltd +#define UHS_VID_COMPUTEX 0x0a4cU // Computex Co., Ltd +#define UHS_VID_EVOLUTION_ELECTRONICS 0x0a4dU // Evolution Electronics, Ltd +#define UHS_VID_STEINBERG_SOFT_UND_HARDWARE 0x0a4eU // Steinberg Soft-und Hardware GmbH +#define UHS_VID_LITTON_SYSTEMS 0x0a4fU // Litton Systems, Inc. +#define UHS_VID_MIMAKI_ENGINEERING 0x0a50U // Mimaki Engineering Co., Ltd +#define UHS_VID_SONY_ELECTRONICS 0x0a51U // Sony Electronics, Inc. +#define UHS_VID_JEBSEE_ELECTRONICS 0x0a52U // Jebsee Electronics Co., Ltd +#define UHS_VID_PORTABLE_PERIPHERAL 0x0a53U // Portable Peripheral Co., Ltd +#define UHS_VID_ELECTRONICS_FOR_IMAGING 0x0a5aU // Electronics For Imaging, Inc. +#define UHS_VID_EASICS_NV 0x0a5bU // EAsics NV +#define UHS_VID_BROADCOM 0x0a5cU // Broadcom Corp. +#define UHS_VID_DIATREND 0x0a5dU // Diatrend Corp. +#define UHS_VID_ZEBRA 0x0a5fU // Zebra +#define UHS_VID_MPMAN 0x0a62U // MPMan +#define UHS_VID_CLEARCUBE_TECHNOLOGY 0x0a66U // ClearCube Technology +#define UHS_VID_MEDELI_ELECTRONICS 0x0a67U // Medeli Electronics Co., Ltd +#define UHS_VID_COMAIDE 0x0a68U // Comaide Corp. +#define UHS_VID_CHROMA_ATE 0x0a69U // Chroma ate, Inc. +#define UHS_VID_GREEN_HOUSE 0x0a6bU // Green House Co., Ltd +#define UHS_VID_INTEGRATED_CIRCUIT_SYSTEMS 0x0a6cU // Integrated Circuit Systems, Inc. +#define UHS_VID_UPS_MANUFACTURING 0x0a6dU // UPS Manufacturing +#define UHS_VID_BENWIN 0x0a6eU // Benwin +#define UHS_VID_CORE_TECHNOLOGY 0x0a6fU // Core Technology, Inc. +#define UHS_VID_INTERNATIONAL_GAME_TECHNOLOGY 0x0a70U // International Game Technology +#define UHS_VID_VIPCOLOR_TECHNOLOGIES_USA 0x0a71U // VIPColor Technologies USA, Inc. +#define UHS_VID_SANWA_DENSHI 0x0a72U // Sanwa Denshi +#define UHS_VID_MACKIE_DESIGNS 0x0a73U // Mackie Designs +#define UHS_VID_NSTL 0x0a7dU // NSTL, Inc. +#define UHS_VID_OCTAGON_SYSTEMS 0x0a7eU // Octagon Systems Corp. +#define UHS_VID_REXON_TECHNOLOGY 0x0a80U // Rexon Technology Corp., Ltd +#define UHS_VID_CHESEN_ELECTRONICS 0x0a81U // Chesen Electronics Corp. +#define UHS_VID_SYSCAN 0x0a82U // Syscan +#define UHS_VID_NEXTCOMM 0x0a83U // NextComm, Inc. +#define UHS_VID_MAUI_INNOVATIVE_PERIPHERALS 0x0a84U // Maui Innovative Peripherals +#define UHS_VID_IDEXX_LABS 0x0a85U // Idexx Labs +#define UHS_VID_NITGEN 0x0a86U // NITGen Co., Ltd +#define UHS_VID_AKTIV 0x0a89U // Aktiv +#define UHS_VID_PICTURETEL 0x0a8dU // Picturetel +#define UHS_VID_JAPAN_AVIATION_ELECTRONICS_INDUSTRY 0x0a8eU // Japan Aviation Electronics Industry, Ltd +#define UHS_VID_CANDY_TECHNOLOGY 0x0a90U // Candy Technology Co., Ltd +#define UHS_VID_GLOBLINK_TECHNOLOGY 0x0a91U // Globlink Technology, Inc. +#define UHS_VID_EGO_SYSTEMS 0x0a92U // EGO SYStems, Inc. +#define UHS_VID_C_TECHNOLOGIES 0x0a93U // C Technologies AB +#define UHS_VID_INTERSENSE 0x0a94U // Intersense +#define UHS_VID_LAVA_COMPUTER_MFG 0x0aa3U // Lava Computer Mfg., Inc. +#define UHS_VID_DEVELCO_ELEKTRONIK 0x0aa4U // Develco Elektronik +#define UHS_VID_FIRST_INTERNATIONAL_DIGITAL 0x0aa5U // First International Digital +#define UHS_VID_PERCEPTION_DIGITAL 0x0aa6U // Perception Digital, Ltd +#define UHS_VID_WINCOR_NIXDORF_INTERNATIONAL 0x0aa7U // Wincor Nixdorf International GmbH +#define UHS_VID_TRIGEM_COMPUTER 0x0aa8U // TriGem Computer, Inc. +#define UHS_VID_BAROMTEC 0x0aa9U // Baromtec Co. +#define UHS_VID_JAPAN_CBM 0x0aaaU // Japan CBM Corp. +#define UHS_VID_VISION_SHAPE_EUROPE 0x0aabU // Vision Shape Europe SA +#define UHS_VID_ICOMPRESSION 0x0aacU // iCompression, Inc. +#define UHS_VID_ROHDE_AND_SCHWARZ_GMBH_AND_CO_KG 0x0aadU // Rohde & Schwarz GmbH & Co. KG +#define UHS_VID_NEC_INFRONTIA_CORP_NITSUKO 0x0aaeU // NEC infrontia Corp. (Nitsuko) +#define UHS_VID_DIGITALWAY 0x0aafU // Digitalway Co., Ltd +#define UHS_VID_ARROW_STRONG_ELECTRONICS 0x0ab0U // Arrow Strong Electronics Co., Ltd +#define UHS_VID_FEIG_ELECTRONIC 0x0ab1U // FEIG ELECTRONIC GmbH +#define UHS_VID_ELLISYS 0x0abaU // Ellisys +#define UHS_VID_STEREO_LINK 0x0abeU // Stereo-Link +#define UHS_VID_DIOLAN 0x0abfU // Diolan +#define UHS_VID_SANYO_SEMICONDUCTOR_COMPANY_MICRO 0x0ac3U // Sanyo Semiconductor Company Micro +#define UHS_VID_LECO 0x0ac4U // Leco Corp. +#define UHS_VID_I_AND_C 0x0ac5U // I & C Corp. +#define UHS_VID_SINGING_ELECTRONS 0x0ac6U // Singing Electrons, Inc. +#define UHS_VID_PANWEST 0x0ac7U // Panwest Corp. +#define UHS_VID_Z_STAR_MICROELECTRONICS 0x0ac8U // Z-Star Microelectronics Corp. +#define UHS_VID_MICRO_SOLUTIONS 0x0ac9U // Micro Solutions, Inc. +#define UHS_VID_OPEN_NETWORKS 0x0acaU // OPEN Networks Ltd +#define UHS_VID_KOGA_ELECTRONICS 0x0accU // Koga Electronics Co. +#define UHS_VID_ID_TECH 0x0acdU // ID Tech +#define UHS_VID_ZYDAS 0x0aceU // ZyDAS +#define UHS_VID_INTOTO 0x0acfU // Intoto, Inc. +#define UHS_VID_INTELLIX 0x0ad0U // Intellix Corp. +#define UHS_VID_REMOTEC_TECHNOLOGY 0x0ad1U // Remotec Technology, Ltd +#define UHS_VID_SERVICE_AND_QUALITY_TECHNOLOGY 0x0ad2U // Service & Quality Technology Co., Ltd +#define UHS_VID_DATA_ENCRYPTION_SYSTEMS 0x0adaU // Data Encryption Systems Ltd. +#define UHS_VID_ALLION_COMPUTER 0x0ae3U // Allion Computer, Inc. +#define UHS_VID_TAITO 0x0ae4U // Taito Corp. +#define UHS_VID_NEODYM_SYSTEMS 0x0ae7U // Neodym Systems, Inc. +#define UHS_VID_SYSTEM_SUPPORT 0x0ae8U // System Support Co., Ltd +#define UHS_VID_NORTH_SHORE_CIRCUIT_DESIGN_LLP 0x0ae9U // North Shore Circuit Design L.L.P. +#define UHS_VID_SCIESSENCE 0x0aeaU // SciEssence, LLC +#define UHS_VID_TTP_COMMUNICATIONS 0x0aebU // TTP Communications, Ltd +#define UHS_VID_NEODIO_TECHNOLOGIES 0x0aecU // Neodio Technologies Corp. +#define UHS_VID_OPTION 0x0af0U // Option +#define UHS_VID_SILVER_I 0x0af6U // Silver I Co., Ltd +#define UHS_VID_B2C2 0x0af7U // B2C2, Inc. +#define UHS_VID_HAMA 0x0af9U // Hama, Inc. +#define UHS_VID_DMC 0x0afaU // DMC Co., Ltd. +#define UHS_VID_ZAPTRONIX 0x0afcU // Zaptronix Ltd +#define UHS_VID_TATENO_DENNOU 0x0afdU // Tateno Dennou, Inc. +#define UHS_VID_CUMMINS_ENGINE 0x0afeU // Cummins Engine Co. +#define UHS_VID_JUMP_ZONE_NETWORK_PRODUCTS 0x0affU // Jump Zone Network Products, Inc. +#define UHS_VID_INGENICO 0x0b00U // INGENICO +#define UHS_VID_ASUSTEK_COMPUTER 0x0b05U // ASUSTek Computer, Inc. +#define UHS_VID_DATAMAX_ONEIL 0x0b0bU // Datamax-O'Neil +#define UHS_VID_TODOS 0x0b0cU // Todos AB +#define UHS_VID_PROJECTLAB 0x0b0dU // ProjectLab +#define UHS_VID_GN_NETCOM 0x0b0eU // GN Netcom +#define UHS_VID_AVID_TECHNOLOGY 0x0b0fU // AVID Technology +#define UHS_VID_PCALLY 0x0b10U // Pcally +#define UHS_VID_I_TECH_SOLUTIONS 0x0b11U // I Tech Solutions Co., Ltd +#define UHS_VID_ELECTRONIC_WARFARE_ASSOC_INC_EWA 0x0b1eU // Electronic Warfare Assoc., Inc. (EWA) +#define UHS_VID_INSYDE_SOFTWARE 0x0b1fU // Insyde Software Corp. +#define UHS_VID_TRANSDIMENSION 0x0b20U // TransDimension, Inc. +#define UHS_VID_YOKOGAWA_ELECTRIC 0x0b21U // Yokogawa Electric Corp. +#define UHS_VID_JAPAN_SYSTEM_DEVELOPMENT 0x0b22U // Japan System Development Co., Ltd +#define UHS_VID_PAN_ASIA_ELECTRONICS 0x0b23U // Pan-Asia Electronics Co., Ltd +#define UHS_VID_LINK_EVOLUTION 0x0b24U // Link Evolution Corp. +#define UHS_VID_RITEK 0x0b27U // Ritek Corp. +#define UHS_VID_KENWOOD 0x0b28U // Kenwood Corp. +#define UHS_VID_VILLAGE_CENTER 0x0b2cU // Village Center, Inc. +#define UHS_VID_PNY_TECHNOLOGIES 0x0b30U // PNY Technologies, Inc. +#define UHS_VID_CONTOUR_DESIGN 0x0b33U // Contour Design, Inc. +#define UHS_VID_HITACHI_ULSI_SYSTEMS 0x0b37U // Hitachi ULSI Systems Co., Ltd +#define UHS_VID_GEAR_HEAD 0x0b38U // Gear Head +#define UHS_VID_OMNIDIRECTIONAL_CONTROL_TECHNOLOGY 0x0b39U // Omnidirectional Control Technology, Inc. +#define UHS_VID_IPAXESS 0x0b3aU // IPaxess +#define UHS_VID_TEKRAM_TECHNOLOGY 0x0b3bU // Tekram Technology Co., Ltd +#define UHS_VID_OLIVETTI_TECHCENTER 0x0b3cU // Olivetti Techcenter +#define UHS_VID_KIKUSUI_ELECTRONICS 0x0b3eU // Kikusui Electronics Corp. +#define UHS_VID_HAL 0x0b41U // Hal Corp. +#define UHS_VID_PLAYCOM 0x0b43U // Play.com, Inc. +#define UHS_VID_SPORTBUGCOM 0x0b47U // Sportbug.com, Inc. +#define UHS_VID_TECHNOTREND_AG 0x0b48U // TechnoTrend AG +#define UHS_VID_ASCII 0x0b49U // ASCII Corp. +#define UHS_VID_PINE 0x0b4bU // Pine Corp. Ltd. +#define UHS_VID_GRAPHTEC_AMERICA 0x0b4dU // Graphtec America, Inc. +#define UHS_VID_MUSICAL_ELECTRONICS 0x0b4eU // Musical Electronics, Ltd +#define UHS_VID_DUMPRIES 0x0b50U // Dumpries Co., Ltd +#define UHS_VID_COMFORT_KEYBOARD 0x0b51U // Comfort Keyboard Co. +#define UHS_VID_COLORADO_MICRODISPLAY 0x0b52U // Colorado MicroDisplay, Inc. +#define UHS_VID_SINBON_ELECTRONICS 0x0b54U // Sinbon Electronics Co., Ltd +#define UHS_VID_TYI_SYSTEMS 0x0b56U // TYI Systems, Ltd +#define UHS_VID_BEIJING_HANWANGTECHNOLOGY 0x0b57U // Beijing HanwangTechnology Co., Ltd +#define UHS_VID_LAKE_COMMUNICATIONS 0x0b59U // Lake Communications, Ltd +#define UHS_VID_COREL 0x0b5aU // Corel Corp. +#define UHS_VID_GREEN_ELECTRONICS 0x0b5fU // Green Electronics Co., Ltd +#define UHS_VID_NSINE 0x0b60U // Nsine, Ltd +#define UHS_VID_NEC_VIEWTECHNOLOGY 0x0b61U // NEC Viewtechnology, Ltd +#define UHS_VID_ORANGE_MICRO 0x0b62U // Orange Micro, Inc. +#define UHS_VID_ADLINK_TECHNOLOGY 0x0b63U // ADLink Technology, Inc. +#define UHS_VID_WONDERFUL_WIRE_CABLE 0x0b64U // Wonderful Wire Cable Co., Ltd +#define UHS_VID_EXPERT_MAGNETICS 0x0b65U // Expert Magnetics Corp. +#define UHS_VID_CYBIKO 0x0b66U // Cybiko Inc. +#define UHS_VID_FAIRBANKS_SCALES 0x0b67U // Fairbanks Scales +#define UHS_VID_CACHEVISION 0x0b69U // CacheVision +#define UHS_VID_MAXIM_INTEGRATED_PRODUCTS 0x0b6aU // Maxim Integrated Products +#define UHS_VID_NAGANO_JAPAN_RADIO 0x0b6fU // Nagano Japan Radio Co., Ltd +#define UHS_VID_PORTALPLAYER 0x0b70U // PortalPlayer, Inc. +#define UHS_VID_SHIN_EI_SANGYO 0x0b71U // SHIN-EI Sangyo Co., Ltd +#define UHS_VID_EMBEDDED_WIRELESS_TECHNOLOGY 0x0b72U // Embedded Wireless Technology Co., Ltd +#define UHS_VID_COMPUTONE 0x0b73U // Computone Corp. +#define UHS_VID_ROLAND_DG 0x0b75U // Roland DG Corp. +#define UHS_VID_SUNRISE_TELECOM 0x0b79U // Sunrise Telecom, Inc. +#define UHS_VID_ZEEVO 0x0b7aU // Zeevo, Inc. +#define UHS_VID_TAIKO_DENKI 0x0b7bU // Taiko Denki Co., Ltd +#define UHS_VID_ITRAN_COMMUNICATIONS 0x0b7cU // ITRAN Communications, Ltd +#define UHS_VID_ASTRODESIGN 0x0b7dU // Astrodesign, Inc. +#define UHS_VID_ID3_TECHNOLOGIES 0x0b81U // id3 Technologies +#define UHS_VID_REXTRON_TECHNOLOGY 0x0b84U // Rextron Technology, Inc. +#define UHS_VID_ELKAT_ELECTRONICS_SDN_BHD 0x0b85U // Elkat Electronics, Sdn., Bhd. +#define UHS_VID_EXPUTER_SYSTEMS 0x0b86U // Exputer Systems, Inc. +#define UHS_VID_PLUS_ONE_I_AND_T 0x0b87U // Plus-One I & T, Inc. +#define UHS_VID_SIGMA_KOKI_CO_LTD_TECHNOLOGY_CENTER 0x0b88U // Sigma Koki Co., Ltd, Technology Center +#define UHS_VID_ADVANCED_DIGITAL_BROADCAST 0x0b89U // Advanced Digital Broadcast, Ltd +#define UHS_VID_SMART_TECHNOLOGIES 0x0b8cU // SMART Technologies Inc. +#define UHS_VID_ASIX_ELECTRONICS 0x0b95U // ASIX Electronics Corp. +#define UHS_VID_SEWON_TELECOM 0x0b96U // Sewon Telecom +#define UHS_VID_O2_MICRO 0x0b97U // O2 Micro, Inc. +#define UHS_VID_PLAYMATES_TOYS 0x0b98U // Playmates Toys, Inc. +#define UHS_VID_AUDIO_INTERNATIONAL 0x0b99U // Audio International, Inc. +#define UHS_VID_DIPL_ING_STEFAN_KUNDE 0x0b9bU // Dipl.-Ing. Stefan Kunde +#define UHS_VID_SOFTPROTEC 0x0b9dU // Softprotec Co. +#define UHS_VID_CHIPPO_TECHNOLOGIES 0x0b9fU // Chippo Technologies +#define UHS_VID_US_ROBOTICS 0x0bafU // U.S. Robotics +#define UHS_VID_CONCORD_CAMERA 0x0bb0U // Concord Camera Corp. +#define UHS_VID_INFINILINK 0x0bb1U // Infinilink Corp. +#define UHS_VID_AMBIT_MICROSYSTEMS 0x0bb2U // Ambit Microsystems Corp. +#define UHS_VID_OFUJI_TECHNOLOGY 0x0bb3U // Ofuji Technology +#define UHS_VID_HTC_HIGH_TECH_COMPUTER 0x0bb4U // HTC (High Tech Computer Corp.) +#define UHS_VID_MURATA_MANUFACTURING 0x0bb5U // Murata Manufacturing Co., Ltd +#define UHS_VID_NETWORK_ALCHEMY 0x0bb6U // Network Alchemy +#define UHS_VID_JOYTECH_COMPUTER 0x0bb7U // Joytech Computer Co., Ltd +#define UHS_VID_HITACHI_SEMICONDUCTOR_AND_DEVICES_SALES 0x0bb8U // Hitachi Semiconductor and Devices Sales Co., Ltd +#define UHS_VID_EIGER_MANDC 0x0bb9U // Eiger M&C Co., Ltd +#define UHS_VID_ZACCESS_SYSTEMS 0x0bbaU // ZAccess Systems +#define UHS_VID_GENERAL_METERS 0x0bbbU // General Meters Corp. +#define UHS_VID_ASSISTIVE_TECHNOLOGY 0x0bbcU // Assistive Technology, Inc. +#define UHS_VID_SYSTEM_CONNECTION 0x0bbdU // System Connection, Inc. +#define UHS_VID_KNILINK_TECHNOLOGY 0x0bc0U // Knilink Technology, Inc. +#define UHS_VID_FUW_YNG_ELECTRONICS 0x0bc1U // Fuw Yng Electronics Co., Ltd +#define UHS_VID_SEAGATE_RSS 0x0bc2U // Seagate RSS LLC +#define UHS_VID_IPWIRELESS 0x0bc3U // IPWireless, Inc. +#define UHS_VID_MICROCUBE 0x0bc4U // Microcube Corp. +#define UHS_VID_JCN 0x0bc5U // JCN Co., Ltd +#define UHS_VID_EXWAY 0x0bc6U // ExWAY, Inc. +#define UHS_VID_X10_WIRELESS_TECHNOLOGY 0x0bc7U // X10 Wireless Technology, Inc. +#define UHS_VID_TELMAX_COMMUNICATIONS 0x0bc8U // Telmax Communications +#define UHS_VID_ECI_TELECOM 0x0bc9U // ECI Telecom, Ltd +#define UHS_VID_STARTEK_ENGINEERING 0x0bcaU // Startek Engineering, Inc. +#define UHS_VID_PERFECT_TECHNIC_ENTERPRISE 0x0bcbU // Perfect Technic Enterprise Co., Ltd +#define UHS_VID_ANDREW_PARGETER_AND_ASSOCIATES 0x0bd7U // Andrew Pargeter & Associates +#define UHS_VID_REALTEK_SEMICONDUCTOR 0x0bdaU // Realtek Semiconductor Corp. +#define UHS_VID_ERICSSON_BUSINESS_MOBILE_NETWORKS_BV 0x0bdbU // Ericsson Business Mobile Networks BV +#define UHS_VID_Y_MEDIA 0x0bdcU // Y Media Corp. +#define UHS_VID_ORANGE_PCS 0x0bddU // Orange PCS +#define UHS_VID_KANDA_TSUSHIN_KOGYO 0x0be2U // Kanda Tsushin Kogyo Co., Ltd +#define UHS_VID_TOYO 0x0be3U // TOYO Corp. +#define UHS_VID_ELKA_INTERNATIONAL 0x0be4U // Elka International, Ltd +#define UHS_VID_DOME_IMAGING_SYSTEMS 0x0be5U // DOME imaging systems, Inc. +#define UHS_VID_DONG_GUAN_HUMEN_WONDERFUL_WIRE_CABLE_FACTORY 0x0be6U // Dong Guan Humen Wonderful Wire Cable Factory +#define UHS_VID_MEI 0x0bedU // MEI +#define UHS_VID_LTK_INDUSTRIES 0x0beeU // LTK Industries, Ltd +#define UHS_VID_WAY2CALL_COMMUNICATIONS 0x0befU // Way2Call Communications +#define UHS_VID_PACE_MICRO_TECHNOLOGY_PLC 0x0bf0U // Pace Micro Technology PLC +#define UHS_VID_INTRACOM 0x0bf1U // Intracom S.A. +#define UHS_VID_KONEXX 0x0bf2U // Konexx +#define UHS_VID_ADDONICS_TECHNOLOGIES_1 0x0bf6U // Addonics Technologies, Inc. +#define UHS_VID_SUNNY_GIKEN 0x0bf7U // Sunny Giken, Inc. +#define UHS_VID_FUJITSU_SIEMENS_COMPUTERS_1 0x0bf8U // Fujitsu Siemens Computers +#define UHS_VID_KVASER 0x0bfdU // Kvaser AB +#define UHS_VID_MOTO_DEVELOPMENT_GROUP 0x0c04U // MOTO Development Group, Inc. +#define UHS_VID_APPIAN_GRAPHICS 0x0c05U // Appian Graphics +#define UHS_VID_HASBRO_GAMES 0x0c06U // Hasbro Games, Inc. +#define UHS_VID_INFINITE_DATA_STORAGE 0x0c07U // Infinite Data Storage, Ltd +#define UHS_VID_AGATE 0x0c08U // Agate +#define UHS_VID_COMJET_INFORMATION_SYSTEM 0x0c09U // Comjet Information System +#define UHS_VID_HIGHPOINT_TECHNOLOGIES 0x0c0aU // Highpoint Technologies, Inc. +#define UHS_VID_DURA_MICRO_INC_ACOMDATA 0x0c0bU // Dura Micro, Inc. (Acomdata) +#define UHS_VID_ZEROPLUS 0x0c12U // Zeroplus +#define UHS_VID_IRIS_GRAPHICS 0x0c15U // Iris Graphics +#define UHS_VID_GYRATION 0x0c16U // Gyration, Inc. +#define UHS_VID_CYBERBOARD_AS 0x0c17U // Cyberboard A/S +#define UHS_VID_SYNERTEK_KOREA 0x0c18U // SynerTek Korea, Inc. +#define UHS_VID_CYBERPIXIE 0x0c19U // cyberPIXIE, Inc. +#define UHS_VID_SILICON_MOTION 0x0c1aU // Silicon Motion, Inc. +#define UHS_VID_MIPS_TECHNOLOGIES 0x0c1bU // MIPS Technologies +#define UHS_VID_HANG_ZHOU_SILAN_ELECTRONICS 0x0c1cU // Hang Zhou Silan Electronics Co., Ltd +#define UHS_VID_TALLY_PRINTER 0x0c22U // Tally Printer Corp. +#define UHS_VID_LERNOUT__HAUSPIE 0x0c23U // Lernout + Hauspie +#define UHS_VID_TAIYO_YUDEN 0x0c24U // Taiyo Yuden +#define UHS_VID_SAMPO 0x0c25U // Sampo Corp. +#define UHS_VID_PROLIFIC_TECHNOLOGY_1 0x0c26U // Prolific Technology Inc. +#define UHS_VID_RFIDEAS 0x0c27U // RFIDeas, Inc +#define UHS_VID_METROLOGIC_INSTRUMENTS 0x0c2eU // Metrologic Instruments +#define UHS_VID_EAGLETRON 0x0c35U // Eagletron, Inc. +#define UHS_VID_E_INK 0x0c36U // E Ink Corp. +#define UHS_VID_EDIGITAL 0x0c37U // e.Digital +#define UHS_VID_DER_AN_ELECTRIC_WIRE_AND_CABLE 0x0c38U // Der An Electric Wire & Cable Co., Ltd +#define UHS_VID_IFR 0x0c39U // IFR +#define UHS_VID_FURUI_PRECISE_COMPONENT_KUNSHAN 0x0c3aU // Furui Precise Component (Kunshan) Co., Ltd +#define UHS_VID_KOMATSU 0x0c3bU // Komatsu, Ltd +#define UHS_VID_RADIUS 0x0c3cU // Radius Co., Ltd +#define UHS_VID_INNOCOM 0x0c3dU // Innocom, Inc. +#define UHS_VID_NEXTCELL 0x0c3eU // Nextcell, Inc. +#define UHS_VID_MOTOROLA_IDEN 0x0c44U // Motorola iDEN +#define UHS_VID_MICRODIA 0x0c45U // Microdia +#define UHS_VID_WAVERIDER_COMMUNICATIONS 0x0c46U // WaveRider Communications, Inc. +#define UHS_VID_ALGE_TIMING 0x0c4aU // ALGE-TIMING GmbH +#define UHS_VID_REINER_SCT_KARTENSYSTEME 0x0c4bU // Reiner SCT Kartensysteme GmbH +#define UHS_VID_NEEDHAMS_ELECTRONICS 0x0c4cU // Needham's Electronics +#define UHS_VID_SEALEVEL_SYSTEMS 0x0c52U // Sealevel Systems, Inc. +#define UHS_VID_VIEWPLUS 0x0c53U // ViewPLUS, Inc. +#define UHS_VID_GLORY 0x0c54U // Glory, Ltd +#define UHS_VID_SPECTRUM_DIGITAL 0x0c55U // Spectrum Digital, Inc. +#define UHS_VID_BILLION_BRIGHT 0x0c56U // Billion Bright, Ltd +#define UHS_VID_IMAGINATIVE_DESIGN_OPERATION 0x0c57U // Imaginative Design Operation Co., Ltd +#define UHS_VID_VIDAR_SYSTEMS 0x0c58U // Vidar Systems Corp. +#define UHS_VID_DONG_GUAN_SHINKO_WIRE 0x0c59U // Dong Guan Shinko Wire Co., Ltd +#define UHS_VID_TRS_INTERNATIONAL_MFG 0x0c5aU // TRS International Mfg., Inc. +#define UHS_VID_XYTRONIX_RESEARCH_AND_DESIGN 0x0c5eU // Xytronix Research & Design +#define UHS_VID_APOGEE_ELECTRONICS 0x0c60U // Apogee Electronics Corp. +#define UHS_VID_CHANT_SINCERE 0x0c62U // Chant Sincere Co., Ltd +#define UHS_VID_TOKO 0x0c63U // Toko, Inc. +#define UHS_VID_SIGNALITY_SYSTEM_ENGINEERING 0x0c64U // Signality System Engineering Co., Ltd +#define UHS_VID_EMINENCE_ENTERPRISE 0x0c65U // Eminence Enterprise Co., Ltd +#define UHS_VID_REXON_ELECTRONICS 0x0c66U // Rexon Electronics Corp. +#define UHS_VID_CONCEPT_TELECOM 0x0c67U // Concept Telecom, Ltd +#define UHS_VID_ACS 0x0c6aU // ACS +#define UHS_VID_JETI_TECHNISCHE_INSTRUMENTE 0x0c6cU // JETI Technische Instrumente GmbH +#define UHS_VID_MCT_ELEKTRONIKLADEN 0x0c70U // MCT Elektronikladen +#define UHS_VID_PEAK_SYSTEM 0x0c72U // PEAK System +#define UHS_VID_OPTRONIC_LABORATORIES 0x0c74U // Optronic Laboratories Inc. +#define UHS_VID_JMTEK 0x0c76U // JMTek, LLC. +#define UHS_VID_SIPIX_GROUP 0x0c77U // Sipix Group, Ltd +#define UHS_VID_DETTO 0x0c78U // Detto Corp. +#define UHS_VID_NUCONNEX_TECHNOLOGIES_PTE 0x0c79U // NuConnex Technologies Pte., Ltd +#define UHS_VID_WING_SPAN_ENTERPRISE 0x0c7aU // Wing-Span Enterprise Co., Ltd +#define UHS_VID_NDA_TECHNOLOGIES 0x0c86U // NDA Technologies, Inc. +#define UHS_VID_KYOCERA_WIRELESS 0x0c88U // Kyocera Wireless Corp. +#define UHS_VID_HONDA_TSUSHIN_KOGYO 0x0c89U // Honda Tsushin Kogyo Co., Ltd +#define UHS_VID_PATHWAY_CONNECTIVITY 0x0c8aU // Pathway Connectivity, Inc. +#define UHS_VID_WAVEFLY 0x0c8bU // Wavefly Corp. +#define UHS_VID_COACTIVE_NETWORKS 0x0c8cU // Coactive Networks +#define UHS_VID_TEMPO 0x0c8dU // Tempo +#define UHS_VID_CESSCOM 0x0c8eU // Cesscom Co., Ltd +#define UHS_VID_APPLIED_MICROSYSTEMS 0x0c8fU // Applied Microsystems +#define UHS_VID_CRYPTERA 0x0c94U // Cryptera +#define UHS_VID_BERKSHIRE_PRODUCTS 0x0c98U // Berkshire Products, Inc. +#define UHS_VID_INNOCHIPS 0x0c99U // Innochips Co., Ltd +#define UHS_VID_HANWOOL_ROBOTICS 0x0c9aU // Hanwool Robotics Corp. +#define UHS_VID_JOBIN_YVON 0x0c9bU // Jobin Yvon, Inc. +#define UHS_VID_SEMTEK 0x0c9dU // SemTek +#define UHS_VID_ZYFER 0x0ca2U // Zyfer +#define UHS_VID_SEGA 0x0ca3U // Sega Corp. +#define UHS_VID_STANDT_INSTRUMENT 0x0ca4U // ST&T Instrument Corp. +#define UHS_VID_BAE_SYSTEMS_CANADA 0x0ca5U // BAE Systems Canada, Inc. +#define UHS_VID_CASTLES_TECHNOLOGY 0x0ca6U // Castles Technology Co., Ltd +#define UHS_VID_INFORMATION_SYSTEMS_LABORATORIES 0x0ca7U // Information Systems Laboratories +#define UHS_VID_MOTOROLA_CGISS 0x0cadU // Motorola CGISS +#define UHS_VID_ASCOM_BUSINESS_SYSTEMS 0x0caeU // Ascom Business Systems, Ltd +#define UHS_VID_BUSLINK 0x0cafU // Buslink +#define UHS_VID_FLYING_PIG_SYSTEMS 0x0cb0U // Flying Pig Systems +#define UHS_VID_INNOVONICS 0x0cb1U // Innovonics, Inc. +#define UHS_VID_CELESTIX_NETWORKS_PTE 0x0cb6U // Celestix Networks, Pte., Ltd +#define UHS_VID_SINGATRON_ENTERPRISE 0x0cb7U // Singatron Enterprise Co., Ltd +#define UHS_VID_OPTICIS 0x0cb8U // Opticis Co., Ltd +#define UHS_VID_TRUST_ELECTRONIC_SHANGHAI 0x0cbaU // Trust Electronic (Shanghai) Co., Ltd +#define UHS_VID_SHANGHAI_DARONG_ELECTRONICS 0x0cbbU // Shanghai Darong Electronics Co., Ltd +#define UHS_VID_PALMAX_TECHNOLOGY 0x0cbcU // Palmax Technology Co., Ltd +#define UHS_VID_PENTEL_CO_LTD_ELECTRONICS_EQUIPMENT_DIV 0x0cbdU // Pentel Co., Ltd (Electronics Equipment Div.) +#define UHS_VID_KERYX_TECHNOLOGIES 0x0cbeU // Keryx Technologies, Inc. +#define UHS_VID_UNION_GENIUS_COMPUTER 0x0cbfU // Union Genius Computer Co., Ltd +#define UHS_VID_KUON_YI_INDUSTRIAL 0x0cc0U // Kuon Yi Industrial Corp. +#define UHS_VID_GIVEN_IMAGING 0x0cc1U // Given Imaging, Ltd +#define UHS_VID_TIMEX 0x0cc2U // Timex Corp. +#define UHS_VID_RIMAGE 0x0cc3U // Rimage Corp. +#define UHS_VID_EMSYS 0x0cc4U // emsys GmbH +#define UHS_VID_SENDO 0x0cc5U // Sendo +#define UHS_VID_INTERMAGIC 0x0cc6U // Intermagic Corp. +#define UHS_VID_KONTRON_MEDICAL_AG 0x0cc7U // Kontron Medical AG +#define UHS_VID_TECHNOTOOLS 0x0cc8U // Technotools Corp. +#define UHS_VID_BROADMAX_TECHNOLOGIES 0x0cc9U // BroadMAX Technologies, Inc. +#define UHS_VID_AMPHENOL 0x0ccaU // Amphenol +#define UHS_VID_SKNET 0x0ccbU // SKNet Co., Ltd +#define UHS_VID_DOMEX_TECHNOLOGY 0x0cccU // Domex Technology Corp. +#define UHS_VID_TERRATEC_ELECTRONIC 0x0ccdU // TerraTec Electronic GmbH +#define UHS_VID_BANG_OLUFSEN 0x0cd4U // Bang Olufsen +#define UHS_VID_LABJACK_CORPORATION 0x0cd5U // LabJack Corporation +#define UHS_VID_NEWCHIP_SRL 0x0cd7U // NewChip S.r.l. +#define UHS_VID_JS_DIGITECH 0x0cd8U // JS Digitech, Inc. +#define UHS_VID_HITACHI_SHIN_DIN_CABLE 0x0cd9U // Hitachi Shin Din Cable, Ltd +#define UHS_VID_Z_COM 0x0cdeU // Z-Com +#define UHS_VID_VALIDATION_TECHNOLOGIES_INTERNATIONAL 0x0ce5U // Validation Technologies International +#define UHS_VID_PICO_TECHNOLOGY 0x0ce9U // Pico Technology +#define UHS_VID_E_CONN_ELECTRONIC 0x0cf1U // e-Conn Electronic Co., Ltd +#define UHS_VID_ENE_TECHNOLOGY 0x0cf2U // ENE Technology, Inc. +#define UHS_VID_ATHEROS_COMMUNICATIONS 0x0cf3U // Atheros Communications, Inc. +#define UHS_VID_FOMTEX 0x0cf4U // Fomtex Corp. +#define UHS_VID_CELLINK 0x0cf5U // Cellink Co., Ltd +#define UHS_VID_COMPUCABLE 0x0cf6U // Compucable Corp. +#define UHS_VID_ISHONI_NETWORKS 0x0cf7U // ishoni Networks +#define UHS_VID_CLARISYS 0x0cf8U // Clarisys, Inc. +#define UHS_VID_CENTRAL_SYSTEM_RESEARCH 0x0cf9U // Central System Research Co., Ltd +#define UHS_VID_INVISO 0x0cfaU // Inviso, Inc. +#define UHS_VID_MINOLTA_QMS 0x0cfcU // Minolta-QMS, Inc. +#define UHS_VID_SAFA_MEDIA 0x0cffU // SAFA MEDIA Co., Ltd. +#define UHS_VID_TELOS_EDV_SYSTEMENTWICKLUNG 0x0d06U // telos EDV Systementwicklung GmbH +#define UHS_VID_UTSTARCOM 0x0d08U // UTStarcom +#define UHS_VID_CONTEMPORARY_CONTROLS 0x0d0bU // Contemporary Controls +#define UHS_VID_ASTRON_ELECTRONICS 0x0d0cU // Astron Electronics Co., Ltd +#define UHS_VID_MKNET 0x0d0dU // MKNet Corp. +#define UHS_VID_HYBRID_NETWORKS 0x0d0eU // Hybrid Networks, Inc. +#define UHS_VID_FENG_SHIN_CABLE 0x0d0fU // Feng Shin Cable Co., Ltd +#define UHS_VID_ELASTIC_NETWORKS 0x0d10U // Elastic Networks +#define UHS_VID_MASPRO_DENKOH 0x0d11U // Maspro Denkoh Corp. +#define UHS_VID_HANSOL_ELECTRONICS 0x0d12U // Hansol Electronics, Inc. +#define UHS_VID_BMF 0x0d13U // BMF Corp. +#define UHS_VID_ARRAY_COMM 0x0d14U // Array Comm, Inc. +#define UHS_VID_ONSTREAM_BV 0x0d15U // OnStream b.v. +#define UHS_VID_HI_TOUCH_IMAGING_TECHNOLOGIES 0x0d16U // Hi-Touch Imaging Technologies Co., Ltd +#define UHS_VID_NALTEC 0x0d17U // NALTEC, Inc. +#define UHS_VID_COAXMEDIA 0x0d18U // coaXmedia +#define UHS_VID_HANK_CONNECTION_INDUSTRIAL 0x0d19U // Hank Connection Industrial Co., Ltd +#define UHS_VID_NXP 0x0d28U // NXP +#define UHS_VID_LEO_HUI_ELECTRIC_WIRE_AND_CABLE 0x0d32U // Leo Hui Electric Wire & Cable Co., Ltd +#define UHS_VID_AIRSPEAK 0x0d33U // AirSpeak, Inc. +#define UHS_VID_REARDEN_STEEL_TECHNOLOGIES 0x0d34U // Rearden Steel Technologies +#define UHS_VID_DAH_KUN 0x0d35U // Dah Kun Co., Ltd +#define UHS_VID_POSIFLEX_TECHNOLOGIES 0x0d3aU // Posiflex Technologies, Inc. +#define UHS_VID_SRI_CABLE_TECHNOLOGY 0x0d3cU // Sri Cable Technology, Ltd +#define UHS_VID_TANGTOP_TECHNOLOGY 0x0d3dU // Tangtop Technology Co., Ltd +#define UHS_VID_FITCOM 0x0d3eU // Fitcom, inc. +#define UHS_VID_MTS_SYSTEMS 0x0d3fU // MTS Systems Corp. +#define UHS_VID_ASCOR 0x0d40U // Ascor, Inc. +#define UHS_VID_TA_YUN_TERMINALS_INDUSTRIAL 0x0d41U // Ta Yun Terminals Industrial Co., Ltd +#define UHS_VID_FULL_DER 0x0d42U // Full Der Co., Ltd +#define UHS_VID_KOBIL_SYSTEMS 0x0d46U // Kobil Systems GmbH +#define UHS_VID_PROMETHEAN_LIMITED 0x0d48U // Promethean Limited +#define UHS_VID_MAXTOR 0x0d49U // Maxtor +#define UHS_VID_NF 0x0d4aU // NF Corp. +#define UHS_VID_GRAPE_SYSTEMS 0x0d4bU // Grape Systems, Inc. +#define UHS_VID_TEDAS_AG 0x0d4cU // Tedas AG +#define UHS_VID_COHERENT 0x0d4dU // Coherent, Inc. +#define UHS_VID_AGERE_SYSTEMS_NETHERLAND_BV 0x0d4eU // Agere Systems Netherland BV +#define UHS_VID_EADS_AIRBUS_FRANCE 0x0d4fU // EADS Airbus France +#define UHS_VID_CLEWARE 0x0d50U // Cleware GmbH +#define UHS_VID_VOLEX_ASIA_PTE 0x0d51U // Volex (Asia) Pte., Ltd +#define UHS_VID_HMI 0x0d53U // HMI Co., Ltd +#define UHS_VID_HOLON 0x0d54U // Holon Corp. +#define UHS_VID_ASKA_TECHNOLOGIES 0x0d55U // ASKA Technologies, Inc. +#define UHS_VID_AVLAB_TECHNOLOGY 0x0d56U // AVLAB Technology, Inc. +#define UHS_VID_SOLOMON_MICROTECH 0x0d57U // Solomon Microtech, Ltd +#define UHS_VID_SMC_NETWORKS 0x0d5cU // SMC Networks, Inc. +#define UHS_VID_MYACOM 0x0d5eU // Myacom, Ltd +#define UHS_VID_CSI 0x0d5fU // CSI, Inc. +#define UHS_VID_IVL_TECHNOLOGIES 0x0d60U // IVL Technologies, Ltd +#define UHS_VID_MEILU_ELECTRONICS_SHENZHEN 0x0d61U // Meilu Electronics (Shenzhen) Co., Ltd +#define UHS_VID_DARFON_ELECTRONICS 0x0d62U // Darfon Electronics Corp. +#define UHS_VID_FRITZ_GEGAUF_AG 0x0d63U // Fritz Gegauf AG +#define UHS_VID_DXG_TECHNOLOGY 0x0d64U // DXG Technology Corp. +#define UHS_VID_KMJP 0x0d65U // KMJP Co., Ltd +#define UHS_VID_TMT 0x0d66U // TMT +#define UHS_VID_ADVANET 0x0d67U // Advanet, Inc. +#define UHS_VID_SUPER_LINK_ELECTRONICS 0x0d68U // Super Link Electronics Co., Ltd +#define UHS_VID_NSI 0x0d69U // NSI +#define UHS_VID_MEGAPOWER_INTERNATIONAL 0x0d6aU // Megapower International Corp. +#define UHS_VID_AND_OR_LOGIC 0x0d6bU // And-Or Logic +#define UHS_VID_TRY_COMPUTER 0x0d70U // Try Computer Co., Ltd +#define UHS_VID_HIRAKAWA_HEWTECH 0x0d71U // Hirakawa Hewtech Corp. +#define UHS_VID_WINMATE_COMMUNICATION 0x0d72U // Winmate Communication, Inc. +#define UHS_VID_HITS_COMMUNICATIONS 0x0d73U // Hit's Communications, Inc. +#define UHS_VID_MFP_KOREA 0x0d76U // MFP Korea, Inc. +#define UHS_VID_POWER_SENTRYNEWPOINT 0x0d77U // Power Sentry/Newpoint +#define UHS_VID_JAPAN_DISTRIBUTOR 0x0d78U // Japan Distributor Corp. +#define UHS_VID_MARX_DATENTECHNIK 0x0d7aU // MARX Datentechnik GmbH +#define UHS_VID_WELLCO_TECHNOLOGY 0x0d7bU // Wellco Technology Co., Ltd +#define UHS_VID_TAIWAN_LINE_TEK_ELECTRONIC 0x0d7cU // Taiwan Line Tek Electronic Co., Ltd +#define UHS_VID_PHISON_ELECTRONICS 0x0d7dU // Phison Electronics Corp. +#define UHS_VID_AMERICAN_COMPUTER_AND_DIGITAL_COMPONENTS 0x0d7eU // American Computer & Digital Components +#define UHS_VID_ESSENTIAL_REALITY 0x0d7fU // Essential Reality LLC +#define UHS_VID_HR_SILVINE_ELECTRONICS 0x0d80U // H.R. Silvine Electronics, Inc. +#define UHS_VID_TECHNOVISION 0x0d81U // TechnoVision +#define UHS_VID_THINK_OUTSIDE 0x0d83U // Think Outside, Inc. +#define UHS_VID_DOLBY_LABORATORIES 0x0d87U // Dolby Laboratories Inc. +#define UHS_VID_OZ_SOFTWARE 0x0d89U // Oz Software +#define UHS_VID_KING_JIM 0x0d8aU // King Jim Co., Ltd +#define UHS_VID_ASCOM_TELECOMMUNICATIONS 0x0d8bU // Ascom Telecommunications, Ltd +#define UHS_VID_C_MEDIA_ELECTRONICS 0x0d8cU // C-Media Electronics, Inc. +#define UHS_VID_PROMOTION_AND_DISPLAY_TECHNOLOGY 0x0d8dU // Promotion & Display Technology, Ltd +#define UHS_VID_GLOBAL_SUN_TECHNOLOGY 0x0d8eU // Global Sun Technology, Inc. +#define UHS_VID_PITNEY_BOWES 0x0d8fU // Pitney Bowes +#define UHS_VID_SURE_FIRE_ELECTRICAL 0x0d90U // Sure-Fire Electrical Corp. +#define UHS_VID_SKANHEX_TECHNOLOGY 0x0d96U // Skanhex Technology, Inc. +#define UHS_VID_SANTA_BARBARA_INSTRUMENT_GROUP 0x0d97U // Santa Barbara Instrument Group +#define UHS_VID_MARS_SEMICONDUCTOR 0x0d98U // Mars Semiconductor Corp. +#define UHS_VID_TRAZER_TECHNOLOGIES 0x0d99U // Trazer Technologies, Inc. +#define UHS_VID_RTX_TELECOM_AS 0x0d9aU // RTX Telecom AS +#define UHS_VID_TAT_SHING_ELECTRICAL 0x0d9bU // Tat Shing Electrical Co. +#define UHS_VID_CHEE_CHEN_HI_TECHNOLOGY 0x0d9cU // Chee Chen Hi-Technology Co., Ltd +#define UHS_VID_SANWA_SUPPLY 0x0d9dU // Sanwa Supply, Inc. +#define UHS_VID_AVAYA 0x0d9eU // Avaya +#define UHS_VID_POWERCOM 0x0d9fU // Powercom Co., Ltd +#define UHS_VID_DANGER_RESEARCH 0x0da0U // Danger Research +#define UHS_VID_SUZHOU_PETERS_PRECISE_INDUSTRIAL 0x0da1U // Suzhou Peter's Precise Industrial Co., Ltd +#define UHS_VID_LAND_INSTRUMENTS_INTERNATIONAL 0x0da2U // Land Instruments International, Ltd +#define UHS_VID_NIPPON_ELECTRO_SENSORY_DEVICES 0x0da3U // Nippon Electro-Sensory Devices Corp. +#define UHS_VID_POLAR_ELECTRO_OY 0x0da4U // Polar Electro Oy +#define UHS_VID_IOGEAR 0x0da7U // IOGear, Inc. +#define UHS_VID_SOFTDSP 0x0da8U // softDSP Co., Ltd +#define UHS_VID_CUBIG_GROUP 0x0dabU // Cubig Group +#define UHS_VID_WESTOVER_SCIENTIFIC 0x0dadU // Westover Scientific +#define UHS_VID_MICRO_STAR_INTERNATIONAL 0x0db0U // Micro Star International +#define UHS_VID_WEN_TE_ELECTRONICS 0x0db1U // Wen Te Electronics Co., Ltd +#define UHS_VID_SHIAN_HWI_PLUG_PARTS_PLASTIC_FACTORY 0x0db2U // Shian Hwi Plug Parts, Plastic Factory +#define UHS_VID_TEKRAM_TECHNOLOGY_1 0x0db3U // Tekram Technology Co., Ltd +#define UHS_VID_CHUNG_FU_CHEN_YEH_ENTERPRISE 0x0db4U // Chung Fu Chen Yeh Enterprise Corp. +#define UHS_VID_ACCESS_IS 0x0db5U // Access IS +#define UHS_VID_ELCON_SYSTEMTECHNIK 0x0db7U // ELCON Systemtechnik +#define UHS_VID_DIGIDESIGN 0x0dbaU // Digidesign +#define UHS_VID_AANDD_MEDICAL 0x0dbcU // A&D Medical +#define UHS_VID_JIUH_SHIUH_PRECISION_INDUSTRY 0x0dbeU // Jiuh Shiuh Precision Industry Co., Ltd +#define UHS_VID_JESS_LINK_INTERNATIONAL 0x0dbfU // Jess-Link International +#define UHS_VID_G7_SOLUTIONS_FORMERLY_GREAT_NOTIONS 0x0dc0U // G7 Solutions (formerly Great Notions) +#define UHS_VID_TAMAGAWA_SEIKI 0x0dc1U // Tamagawa Seiki Co., Ltd +#define UHS_VID_ATHENA_SMARTCARD_SOLUTIONS 0x0dc3U // Athena Smartcard Solutions, Inc. +#define UHS_VID_MACPOWER_PERIPHERALS 0x0dc4U // Macpower Peripherals, Ltd +#define UHS_VID_SDK 0x0dc5U // SDK Co., Ltd +#define UHS_VID_PRECISION_SQUARED_TECHNOLOGY 0x0dc6U // Precision Squared Technology Corp. +#define UHS_VID_FIRST_CABLE_LINE 0x0dc7U // First Cable Line, Inc. +#define UHS_VID_NETWORKFAB 0x0dcdU // NetworkFab Corp. +#define UHS_VID_ACCESS_SOLUTIONS 0x0dd0U // Access Solutions +#define UHS_VID_CONTEK_ELECTRONICS 0x0dd1U // Contek Electronics Co., Ltd +#define UHS_VID_POWER_QUOTIENT_INTERNATIONAL 0x0dd2U // Power Quotient International Co., Ltd +#define UHS_VID_MEDIAQ 0x0dd3U // MediaQ +#define UHS_VID_CUSTOM_ENGINEERING_SPA 0x0dd4U // Custom Engineering SPA +#define UHS_VID_CALIFORNIA_MICRO_DEVICES 0x0dd5U // California Micro Devices +#define UHS_VID_KOCOM 0x0dd7U // Kocom Co., Ltd +#define UHS_VID_NETAC_TECHNOLOGY 0x0dd8U // Netac Technology Co., Ltd +#define UHS_VID_HIGHSPEED_SURFING 0x0dd9U // HighSpeed Surfing +#define UHS_VID_INTEGRATED_CIRCUIT_SOLUTION 0x0ddaU // Integrated Circuit Solution, Inc. +#define UHS_VID_TAMARACK 0x0ddbU // Tamarack, Inc. +#define UHS_VID_DATELINK_TECHNOLOGY 0x0dddU // Datelink Technology Co., Ltd +#define UHS_VID_UBICOM 0x0ddeU // Ubicom, Inc. +#define UHS_VID_BD_CONSUMER_HEALTHCARE 0x0de0U // BD Consumer Healthcare +#define UHS_VID_USBMICRO 0x0de7U // USBmicro +#define UHS_VID_UTECH_ELECTRONIC_DG 0x0deaU // UTECH Electronic (D.G.) Co., Ltd. +#define UHS_VID_NOVASONICS 0x0dedU // Novasonics +#define UHS_VID_LIFETIME_MEMORY_PRODUCTS 0x0deeU // Lifetime Memory Products +#define UHS_VID_FULL_RISE_ELECTRONIC 0x0defU // Full Rise Electronic Co., Ltd +#define UHS_VID_NETANDSYS 0x0df4U // NET&SYS +#define UHS_VID_SITECOM_EUROPE_BV 0x0df6U // Sitecom Europe B.V. +#define UHS_VID_MOBILE_ACTION_TECHNOLOGY 0x0df7U // Mobile Action Technology, Inc. +#define UHS_VID_TOYO_COMMUNICATION_EQUIPMENT 0x0dfaU // Toyo Communication Equipment Co., Ltd +#define UHS_VID_GENERALTOUCH_TECHNOLOGY 0x0dfcU // GeneralTouch Technology Co., Ltd +#define UHS_VID_NIPPON_SYSTEMWARE 0x0e03U // Nippon Systemware Co., Ltd +#define UHS_VID_WINBEST_TECHNOLOGY 0x0e08U // Winbest Technology Co., Ltd +#define UHS_VID_AMIGO_TECHNOLOGY 0x0e0bU // Amigo Technology Inc. +#define UHS_VID_GESYTEC 0x0e0cU // Gesytec +#define UHS_VID_PICOQUANT 0x0e0dU // PicoQuant GmbH +#define UHS_VID_VMWARE 0x0e0fU // VMware, Inc. +#define UHS_VID_JMTEK_1 0x0e16U // JMTek, LLC +#define UHS_VID_WALEX_ELECTRONIC 0x0e17U // Walex Electronic, Ltd +#define UHS_VID_UNISYS_1 0x0e1aU // Unisys +#define UHS_VID_CREWAVE 0x0e1bU // Crewave +#define UHS_VID_PEGASUS_TECHNOLOGIES 0x0e20U // Pegasus Technologies Ltd. +#define UHS_VID_COWON_SYSTEMS 0x0e21U // Cowon Systems, Inc. +#define UHS_VID_SYMBIAN 0x0e22U // Symbian Ltd. +#define UHS_VID_LIOU_YUANE_ENTERPRISE 0x0e23U // Liou Yuane Enterprise Co., Ltd +#define UHS_VID_VINCHIP_SYSTEMS 0x0e25U // VinChip Systems, Inc. +#define UHS_VID_J_PHONE_EAST 0x0e26U // J-Phone East Co., Ltd +#define UHS_VID_HEARTMATH 0x0e30U // HeartMath LLC +#define UHS_VID_MICRO_COMPUTER_CONTROL 0x0e34U // Micro Computer Control Corp. +#define UHS_VID_3PEA_TECHNOLOGIES 0x0e35U // 3Pea Technologies, Inc. +#define UHS_VID_TIEPIE_ENGINEERING 0x0e36U // TiePie engineering +#define UHS_VID_STRATITEC 0x0e38U // Stratitec, Inc. +#define UHS_VID_SMART_MODULAR_TECHNOLOGIES 0x0e39U // Smart Modular Technologies, Inc. +#define UHS_VID_NEOSTAR_TECHNOLOGY 0x0e3aU // Neostar Technology Co., Ltd +#define UHS_VID_MANSELLA 0x0e3bU // Mansella, Ltd +#define UHS_VID_LINE6 0x0e41U // Line6, Inc. +#define UHS_VID_SUN_RISEFUL_TECHNOLOGY 0x0e44U // Sun-Riseful Technology Co., Ltd. +#define UHS_VID_JULIA 0x0e48U // Julia Corp., Ltd +#define UHS_VID_SHENZHEN_BAO_HING_ELECTRIC_WIRE_AND_CABLE_MFR 0x0e4aU // Shenzhen Bao Hing Electric Wire & Cable Mfr. Co. +#define UHS_VID_RADICA_GAMES 0x0e4cU // Radica Games, Ltd +#define UHS_VID_TECHNODATA_INTERWARE 0x0e50U // TechnoData Interware +#define UHS_VID_SPEED_DRAGON_MULTIMEDIA 0x0e55U // Speed Dragon Multimedia, Ltd +#define UHS_VID_KINGSTON_TECHNOLOGY_COMPANY 0x0e56U // Kingston Technology Company, Inc. +#define UHS_VID_ACTIVE 0x0e5aU // Active Co., Ltd +#define UHS_VID_UNION_POWER_INFORMATION_INDUSTRIAL 0x0e5bU // Union Power Information Industrial Co., Ltd +#define UHS_VID_BITLAND_INFORMATION_TECHNOLOGY 0x0e5cU // Bitland Information Technology Co., Ltd +#define UHS_VID_NELTRON_INDUSTRIAL 0x0e5dU // Neltron Industrial Co., Ltd +#define UHS_VID_CONWISE_TECHNOLOGY 0x0e5eU // Conwise Technology Co., Ltd. +#define UHS_VID_HAWKING_TECHNOLOGIES 0x0e66U // Hawking Technologies +#define UHS_VID_FOSSIL 0x0e67U // Fossil, Inc. +#define UHS_VID_MEGAWIN_TECHNOLOGY 0x0e6aU // Megawin Technology Co., Ltd +#define UHS_VID_LOGIC3 0x0e6fU // Logic3 +#define UHS_VID_TOKYO_ELECTRONIC_INDUSTRY 0x0e70U // Tokyo Electronic Industry Co., Ltd +#define UHS_VID_HSI_CHIN_ELECTRONICS 0x0e72U // Hsi-Chin Electronics Co., Ltd +#define UHS_VID_TVS_ELECTRONICS 0x0e75U // TVS Electronics, Ltd +#define UHS_VID_ARCHOS 0x0e79U // Archos, Inc. +#define UHS_VID_ON_TECH_INDUSTRY 0x0e7bU // On-Tech Industry Co., Ltd +#define UHS_VID_GMATE 0x0e7eU // Gmate, Inc. +#define UHS_VID_CHING_TAI_ELECTRIC_WIRE_AND_CABLE 0x0e82U // Ching Tai Electric Wire & Cable Co., Ltd +#define UHS_VID_SHIN_AN_WIRE_AND_CABLE 0x0e83U // Shin An Wire & Cable Co. +#define UHS_VID_WELL_FORCE_ELECTRONIC 0x0e8cU // Well Force Electronic Co., Ltd +#define UHS_VID_MEDIATEK_1 0x0e8dU // MediaTek Inc. +#define UHS_VID_GREENASIA 0x0e8fU // GreenAsia Inc. +#define UHS_VID_WIEBETECH 0x0e90U // WiebeTech, LLC +#define UHS_VID_VTECH_ENGINEERING_CANADA 0x0e91U // VTech Engineering Canada, Ltd +#define UHS_VID_CS_GLORY_ENTERPRISE 0x0e92U // C's Glory Enterprise Co., Ltd +#define UHS_VID_EM_TECHNICS 0x0e93U // eM Technics Co., Ltd +#define UHS_VID_FUTURE_TECHNOLOGY 0x0e95U // Future Technology Co., Ltd +#define UHS_VID_APLUX_COMMUNICATIONS 0x0e96U // Aplux Communications, Ltd +#define UHS_VID_FINGERWORKS 0x0e97U // Fingerworks, Inc. +#define UHS_VID_ADVANCED_ANALOGIC_TECHNOLOGIES 0x0e98U // Advanced Analogic Technologies, Inc. +#define UHS_VID_PARALLEL_DICE 0x0e99U // Parallel Dice Co., Ltd +#define UHS_VID_TA_HSING_INDUSTRIES 0x0e9aU // TA HSING Industries, Ltd +#define UHS_VID_ADTEC 0x0e9bU // ADTEC Corp. +#define UHS_VID_STREAMZAP 0x0e9cU // Streamzap, Inc. +#define UHS_VID_TAMURA 0x0e9fU // Tamura Corp. +#define UHS_VID_OURS_TECHNOLOGY 0x0ea0U // Ours Technology, Inc. +#define UHS_VID_NIHON_COMPUTER 0x0ea6U // Nihon Computer Co., Ltd +#define UHS_VID_MSL_ENTERPRISES 0x0ea7U // MSL Enterprises Corp. +#define UHS_VID_CENDYNE 0x0ea8U // CenDyne, Inc. +#define UHS_VID_HUMAX_1 0x0eadU // Humax Co., Ltd +#define UHS_VID_NOVATECH 0x0eb0U // NovaTech +#define UHS_VID_WIS_TECHNOLOGIES 0x0eb1U // WIS Technologies, Inc. +#define UHS_VID_Y_S_ELECTRONIC 0x0eb2U // Y-S Electronic Co., Ltd +#define UHS_VID_SAINT_TECHNOLOGY 0x0eb3U // Saint Technology Corp. +#define UHS_VID_ENDOR_AG 0x0eb7U // Endor AG +#define UHS_VID_METTLER_TOLEDO 0x0eb8U // Mettler Toledo +#define UHS_VID_THERMO_FISHER_SCIENTIFIC 0x0ebbU // Thermo Fisher Scientific +#define UHS_VID_VWEB 0x0ebeU // VWeb Corp. +#define UHS_VID_OMEGA_TECHNOLOGY_OF_TAIWAN 0x0ebfU // Omega Technology of Taiwan, Inc. +#define UHS_VID_LHI_TECHNOLOGY_CHINA 0x0ec0U // LHI Technology (China) Co., Ltd +#define UHS_VID_ABIT_COMPUTER 0x0ec1U // Abit Computer Corp. +#define UHS_VID_SWEETRAY_INDUSTRIAL 0x0ec2U // Sweetray Industrial, Ltd +#define UHS_VID_AXELL 0x0ec3U // Axell Co., Ltd +#define UHS_VID_BALLRACING_DEVELOPMENTS 0x0ec4U // Ballracing Developments, Ltd +#define UHS_VID_GT_INFORMATION_SYSTEM 0x0ec5U // GT Information System Co., Ltd +#define UHS_VID_INNOVISION_MULTIMEDIA 0x0ec6U // InnoVISION Multimedia, Ltd +#define UHS_VID_THETA_LINK 0x0ec7U // Theta Link Corp. +#define UHS_VID_LITE_ON_IT 0x0ecdU // Lite-On IT Corp. +#define UHS_VID_TAISOL_ELECTRONICS 0x0eceU // TaiSol Electronics Co., Ltd +#define UHS_VID_PHOGENIX_IMAGING 0x0ecfU // Phogenix Imaging, LLC +#define UHS_VID_WINMAXGROUP 0x0ed1U // WinMaxGroup +#define UHS_VID_KYOTO_MICRO_COMPUTER 0x0ed2U // Kyoto Micro Computer Co., Ltd +#define UHS_VID_WING_TECH_ENTERPRISE 0x0ed3U // Wing-Tech Enterprise Co., Ltd +#define UHS_VID_FIBERBYTE 0x0ed5U // Fiberbyte +#define UHS_VID_NORIAKE_ITRON 0x0edaU // Noriake Itron Corp. +#define UHS_VID_E_MDT 0x0edfU // e-MDT Co., Ltd +#define UHS_VID_SHIMA_SEIKI_MFG 0x0ee0U // Shima Seiki Mfg., Ltd +#define UHS_VID_SAROTECH 0x0ee1U // Sarotech Co., Ltd +#define UHS_VID_AMI_SEMICONDUCTOR 0x0ee2U // AMI Semiconductor, Inc. +#define UHS_VID_COMTRUE_TECHNOLOGY 0x0ee3U // ComTrue Technology Corp. +#define UHS_VID_SUNRICH_TECHNOLOGY 0x0ee4U // Sunrich Technology, Ltd +#define UHS_VID_DIGITAL_STREAM_TECHNOLOGY 0x0eeeU // Digital Stream Technology, Inc. +#define UHS_VID_D_WAV_SCIENTIFIC 0x0eefU // D-WAV Scientific Co., Ltd +#define UHS_VID_HITACHI_CABLE 0x0ef0U // Hitachi Cable, Ltd +#define UHS_VID_AICHI_MICRO_INTELLIGENT 0x0ef1U // Aichi Micro Intelligent Corp. +#define UHS_VID_IO_MAGIC 0x0ef2U // I/O Magic Corp. +#define UHS_VID_LYNN_PRODUCTS 0x0ef3U // Lynn Products, Inc. +#define UHS_VID_DSI_DATOTECH 0x0ef4U // DSI Datotech +#define UHS_VID_POINTCHIPS 0x0ef5U // PointChips +#define UHS_VID_YIELD_MICROELECTRONICS 0x0ef6U // Yield Microelectronics Corp. +#define UHS_VID_SM_TECH_CO_LTD_TULIP 0x0ef7U // SM Tech Co., Ltd (Tulip) +#define UHS_VID_OASIS_SEMICONDUCTOR 0x0efdU // Oasis Semiconductor +#define UHS_VID_WEM_TECHNOLOGY 0x0efeU // Wem Technology, Inc. +#define UHS_VID_UNITEK_UPS_SYSTEMS 0x0f03U // Unitek UPS Systems +#define UHS_VID_VISUAL_FRONTIER_ENTERPRISE 0x0f06U // Visual Frontier Enterprise Co., Ltd +#define UHS_VID_CSL_WIRE_AND_PLUG_SHEN_ZHEN 0x0f08U // CSL Wire & Plug (Shen Zhen) Co. +#define UHS_VID_CAS 0x0f0cU // CAS Corp. +#define UHS_VID_HORI 0x0f0dU // Hori Co., Ltd +#define UHS_VID_ENERGY_FULL 0x0f0eU // Energy Full Corp. +#define UHS_VID_LD_DIDACTIC 0x0f11U // LD Didactic GmbH +#define UHS_VID_MARS_ENGINEERING 0x0f12U // Mars Engineering Corp. +#define UHS_VID_ACETEK_TECHNOLOGY 0x0f13U // Acetek Technology Co., Ltd +#define UHS_VID_INGENICO_1 0x0f14U // Ingenico +#define UHS_VID_FINGER_LAKES_INSTRUMENTATION 0x0f18U // Finger Lakes Instrumentation +#define UHS_VID_ORACOM 0x0f19U // Oracom Co., Ltd +#define UHS_VID_ONSET_COMPUTER 0x0f1bU // Onset Computer Corp. +#define UHS_VID_FUNAI_ELECTRIC 0x0f1cU // Funai Electric Co., Ltd +#define UHS_VID_IWILL 0x0f1dU // Iwill Corp. +#define UHS_VID_IOI_TECHNOLOGY 0x0f21U // IOI Technology Corp. +#define UHS_VID_SENIOR_INDUSTRIES 0x0f22U // Senior Industries, Inc. +#define UHS_VID_LEADER_TECH_MANUFACTURER 0x0f23U // Leader Tech Manufacturer Co., Ltd +#define UHS_VID_FLEX_P_INDUSTRIES_SND_BHD 0x0f24U // Flex-P Industries, Snd., Bhd. +#define UHS_VID_VIPOWER 0x0f2dU // ViPower, Inc. +#define UHS_VID_GENIALITY_MAPLE_TECHNOLOGY 0x0f2eU // Geniality Maple Technology Co., Ltd +#define UHS_VID_PRIVA_DESIGN_SERVICES 0x0f2fU // Priva Design Services +#define UHS_VID_JESS_TECHNOLOGY 0x0f30U // Jess Technology Co., Ltd +#define UHS_VID_CHRYSALIS_DEVELOPMENT 0x0f31U // Chrysalis Development +#define UHS_VID_YFC_BONEAGLE_ELECTRIC 0x0f32U // YFC-BonEagle Electric Co., Ltd +#define UHS_VID_KOKUYO 0x0f37U // Kokuyo Co., Ltd +#define UHS_VID_NIEN_YI_INDUSTRIAL 0x0f38U // Nien-Yi Industrial Corp. +#define UHS_VID_TG3_ELECTRONICS_1 0x0f39U // TG3 Electronics +#define UHS_VID_AIRPRIME_INCORPORATED 0x0f3dU // Airprime, Incorporated +#define UHS_VID_RDC_SEMICONDUCTOR 0x0f41U // RDC Semiconductor Co., Ltd +#define UHS_VID_NITAL_CONSULTING_SERVICES 0x0f42U // Nital Consulting Services, Inc. +#define UHS_VID_POLHEMUS 0x0f44U // Polhemus +#define UHS_VID_ST_JOHN_TECHNOLOGY 0x0f4bU // St. John Technology Co., Ltd +#define UHS_VID_WORLDWIDE_CABLE_OPTO 0x0f4cU // WorldWide Cable Opto Corp. +#define UHS_VID_MICROTUNE 0x0f4dU // Microtune, Inc. +#define UHS_VID_FREEDOM_SCIENTIFIC 0x0f4eU // Freedom Scientific +#define UHS_VID_WING_KEY_ELECTRICAL 0x0f52U // Wing Key Electrical Co., Ltd +#define UHS_VID_DONGGUAN_WHITE_HORSE_CABLE_FACTORY 0x0f53U // Dongguan White Horse Cable Factory, Ltd +#define UHS_VID_KAWAI_MUSICAL_INSTRUMENTS_MFG 0x0f54U // Kawai Musical Instruments Mfg. Co., Ltd +#define UHS_VID_AMBICOM 0x0f55U // AmbiCom, Inc. +#define UHS_VID_PRAIRIECOMM 0x0f5cU // Prairiecomm, Inc. +#define UHS_VID_NEWAGE_INTERNATIONAL 0x0f5dU // NewAge International, LLC +#define UHS_VID_KEY_TECHNOLOGY 0x0f5fU // Key Technology Corp. +#define UHS_VID_NTK 0x0f60U // NTK, Ltd +#define UHS_VID_VARIAN 0x0f61U // Varian, Inc. +#define UHS_VID_ACROX_TECHNOLOGIES 0x0f62U // Acrox Technologies Co., Ltd +#define UHS_VID_LEAPFROG_ENTERPRISES 0x0f63U // LeapFrog Enterprises +#define UHS_VID_KOBE_STEEL 0x0f68U // Kobe Steel, Ltd +#define UHS_VID_DIONEX 0x0f69U // Dionex Corp. +#define UHS_VID_VIBREN_TECHNOLOGIES 0x0f6aU // Vibren Technologies, Inc. +#define UHS_VID_INTELLIGENT_SYSTEMS 0x0f6eU // INTELLIGENT SYSTEMS +#define UHS_VID_DFI_1 0x0f73U // DFI +#define UHS_VID_GUNTERMANN_AND_DRUNCK 0x0f78U // Guntermann & Drunck GmbH +#define UHS_VID_DQ_TECHNOLOGY 0x0f7cU // DQ Technology, Inc. +#define UHS_VID_NETBOTZ 0x0f7dU // NetBotz, Inc. +#define UHS_VID_FLUKE 0x0f7eU // Fluke Corp. +#define UHS_VID_VTECH_HOLDINGS 0x0f88U // VTech Holdings, Ltd +#define UHS_VID_YAZAKI 0x0f8bU // Yazaki Corp. +#define UHS_VID_YOUNG_GENERATION_INTERNATIONAL 0x0f8cU // Young Generation International Corp. +#define UHS_VID_UNIWILL_COMPUTER 0x0f8dU // Uniwill Computer Corp. +#define UHS_VID_KINGNET_TECHNOLOGY 0x0f8eU // Kingnet Technology Co., Ltd +#define UHS_VID_SOMA_NETWORKS 0x0f8fU // Soma Networks +#define UHS_VID_CVILUX 0x0f97U // CviLux Corp. +#define UHS_VID_CYBERBANK 0x0f98U // CyberBank Corp. +#define UHS_VID_HYUN_WON 0x0f9cU // Hyun Won, Inc. +#define UHS_VID_LUCENT_TECHNOLOGIES_1 0x0f9eU // Lucent Technologies +#define UHS_VID_STARCONN_ELECTRONIC 0x0fa3U // Starconn Electronic Co., Ltd +#define UHS_VID_ATL_TECHNOLOGY 0x0fa4U // ATL Technology +#define UHS_VID_SOTEC 0x0fa5U // Sotec Co., Ltd +#define UHS_VID_EPOX_COMPUTER 0x0fa7U // Epox Computer Co., Ltd +#define UHS_VID_LOGIC_CONTROLS 0x0fa8U // Logic Controls, Inc. +#define UHS_VID_WINPOINT_ELECTRONIC 0x0fafU // Winpoint Electronic Corp. +#define UHS_VID_HAURTIAN_WIRE_AND_CABLE 0x0fb0U // Haurtian Wire & Cable Co., Ltd +#define UHS_VID_INCLOSE_DESIGN 0x0fb1U // Inclose Design, Inc. +#define UHS_VID_JUAN_CHERN_INDUSTRIAL 0x0fb2U // Juan-Chern Industrial Co., Ltd +#define UHS_VID_HEBER 0x0fb6U // Heber Ltd +#define UHS_VID_WISTRON 0x0fb8U // Wistron Corp. +#define UHS_VID_AACOM 0x0fb9U // AACom Corp. +#define UHS_VID_SAN_SHING_ELECTRONICS 0x0fbaU // San Shing Electronics Co., Ltd +#define UHS_VID_BITWISE_SYSTEMS 0x0fbbU // Bitwise Systems, Inc. +#define UHS_VID_MITAC_INTERNATINAL 0x0fc1U // Mitac Internatinal Corp. +#define UHS_VID_PLUG_AND_JACK_INDUSTRIAL 0x0fc2U // Plug and Jack Industrial, Inc. +#define UHS_VID_DELCOM_ENGINEERING 0x0fc5U // Delcom Engineering +#define UHS_VID_DATAPLUS_SUPPLIES 0x0fc6U // Dataplus Supplies, Inc. +#define UHS_VID_RESEARCH_IN_MOTION 0x0fcaU // Research In Motion, Ltd. +#define UHS_VID_SONY_ERICSSON_MOBILE_COMMUNICATIONS 0x0fceU // Sony Ericsson Mobile Communications AB +#define UHS_VID_DYNASTREAM_INNOVATIONS 0x0fcfU // Dynastream Innovations, Inc. +#define UHS_VID_TULIP_COMPUTERS_BV 0x0fd0U // Tulip Computers B.V. +#define UHS_VID_GIANT_ELECTRONICS 0x0fd1U // Giant Electronics Ltd. +#define UHS_VID_SEAC_BANCHE 0x0fd2U // Seac Banche +#define UHS_VID_TENOVIS_GMBH_AND_CO_KG 0x0fd4U // Tenovis GmbH & Co., KG +#define UHS_VID_DIRECT_ACCESS_TECHNOLOGY 0x0fd5U // Direct Access Technology, Inc. +#define UHS_VID_ELGATO_SYSTEMS 0x0fd9U // Elgato Systems GmbH +#define UHS_VID_QUANTEC_NETWORKS 0x0fdaU // Quantec Networks GmbH +#define UHS_VID_MICRO_PLUS 0x0fdcU // Micro Plus +#define UHS_VID_OREGON_SCIENTIFIC 0x0fdeU // Oregon Scientific +#define UHS_VID_OSTERHOUT_DESIGN_GROUP 0x0fe0U // Osterhout Design Group +#define UHS_VID_IN_TECH_ELECTRONICS 0x0fe4U // IN-Tech Electronics, Ltd +#define UHS_VID_GREENCONN_USA 0x0fe5U // Greenconn (U.S.A.), Inc. +#define UHS_VID_KONTRON_INDUSTRIAL_COMPUTER_SOURCE_ICS_ADVENT 0x0fe6U // Kontron (Industrial Computer Source / ICS Advent) +#define UHS_VID_DVICO 0x0fe9U // DVICO +#define UHS_VID_UNITED_COMPUTER_ACCESSORIES 0x0feaU // United Computer Accessories +#define UHS_VID_CRS_ELECTRONIC 0x0febU // CRS Electronic Co., Ltd +#define UHS_VID_UMC_ELECTRONICS 0x0fecU // UMC Electronics Co., Ltd +#define UHS_VID_ACCESS 0x0fedU // Access Co., Ltd +#define UHS_VID_XSIDO 0x0feeU // Xsido Corp. +#define UHS_VID_MJ_RESEARCH 0x0fefU // MJ Research, Inc. +#define UHS_VID_CORE_VALLEY 0x0ff6U // Core Valley Co., Ltd +#define UHS_VID_CHI_SHING_COMPUTER_ACCESSORIES 0x0ff7U // CHI SHING Computer Accessories Co., Ltd +#define UHS_VID_CLAVIA_DMI 0x0ffcU // Clavia DMI AB +#define UHS_VID_EARLYSENSE 0x0ffdU // EarlySense +#define UHS_VID_AOPEN 0x0fffU // Aopen, Inc. +#define UHS_VID_SPEED_TECH 0x1000U // Speed Tech Corp. +#define UHS_VID_RITRONICS_COMPONENTS_S_PTE 0x1001U // Ritronics Components (S) Pte., Ltd +#define UHS_VID_SIGMA 0x1003U // Sigma Corp. +#define UHS_VID_LG_ELECTRONICS 0x1004U // LG Electronics, Inc. +#define UHS_VID_APACER_TECHNOLOGY 0x1005U // Apacer Technology, Inc. +#define UHS_VID_IRIVER 0x1006U // iRiver, Ltd. +#define UHS_VID_EMUZED 0x1009U // Emuzed, Inc. +#define UHS_VID_AV_CHASEWAY 0x100aU // AV Chaseway, Ltd +#define UHS_VID_CHOU_CHIN_INDUSTRIAL 0x100bU // Chou Chin Industrial Co., Ltd +#define UHS_VID_NETOPIA 0x100dU // Netopia, Inc. +#define UHS_VID_FUKUDA_DENSHI 0x1010U // Fukuda Denshi Co., Ltd +#define UHS_VID_MOBILE_MEDIA_TECH 0x1011U // Mobile Media Tech. +#define UHS_VID_SDKM_FIBRES_WIRES_AND_CABLES_BERHAD 0x1012U // SDKM Fibres, Wires & Cables Berhad +#define UHS_VID_TST_TOUCHLESS_SENSOR_TECHNOLOGY_AG 0x1013U // TST-Touchless Sensor Technology AG +#define UHS_VID_DENSITRON_TECHNOLOGIES_PLC 0x1014U // Densitron Technologies PLC +#define UHS_VID_SOFTRONICS_PTY 0x1015U // Softronics Pty., Ltd +#define UHS_VID_XIAMEN_HUNGS_ENTERPRISE 0x1016U // Xiamen Hung's Enterprise Co., Ltd +#define UHS_VID_SPEEDY_INDUSTRIAL_SUPPLIES_PTE 0x1017U // Speedy Industrial Supplies, Pte., Ltd +#define UHS_VID_ELITEGROUP_COMPUTER_SYSTEMS_ECS 0x1019U // Elitegroup Computer Systems (ECS) +#define UHS_VID_LABTEC_1 0x1020U // Labtec +#define UHS_VID_SHINKO_SHOJI 0x1022U // Shinko Shoji Co., Ltd +#define UHS_VID_HYPER_PALTEK 0x1025U // Hyper-Paltek +#define UHS_VID_NEWLY 0x1026U // Newly Corp. +#define UHS_VID_TIME_DOMAIN 0x1027U // Time Domain +#define UHS_VID_INOVYS 0x1028U // Inovys Corp. +#define UHS_VID_ATLANTIC_COAST_TELESYS 0x1029U // Atlantic Coast Telesys +#define UHS_VID_RAMOS_TECHNOLOGY 0x102aU // Ramos Technology Co., Ltd +#define UHS_VID_INFOTRONIC_AMERICA 0x102bU // Infotronic America, Inc. +#define UHS_VID_ETOMS_ELECTRONICS 0x102cU // Etoms Electronics Corp. +#define UHS_VID_WINIC 0x102dU // Winic Corp. +#define UHS_VID_COMAX_TECHNOLOGY 0x1031U // Comax Technology, Inc. +#define UHS_VID_C_ONE_TECHNOLOGY 0x1032U // C-One Technology Corp. +#define UHS_VID_NUCAM 0x1033U // Nucam Corp. +#define UHS_VID_STEELSERIES_APS 0x1038U // SteelSeries ApS +#define UHS_VID_DEVOLO_AG 0x1039U // devolo AG +#define UHS_VID_PSA 0x103aU // PSA +#define UHS_VID_STANTON 0x103dU // Stanton +#define UHS_VID_ICREATE_TECHNOLOGIES 0x1043U // iCreate Technologies Corp. +#define UHS_VID_CHU_YUEN_ENTERPRISE 0x1044U // Chu Yuen Enterprise Co., Ltd +#define UHS_VID_WINBOND_ELECTRONICS_CORP_HEX_ 0x1046U // Winbond Electronics Corp. [hex] +#define UHS_VID_TARGUS_GROUP_INTERNATIONAL 0x1048U // Targus Group International +#define UHS_VID_MYLEX_BUSLOGIC 0x104bU // Mylex / Buslogic +#define UHS_VID_AMCO_TEC_INTERNATIONAL 0x104cU // AMCO TEC International, Inc. +#define UHS_VID_NEWPORT_CORPORATION 0x104dU // Newport Corporation +#define UHS_VID_WB_ELECTRONICS 0x104fU // WB Electronics +#define UHS_VID_YUBICOCOM 0x1050U // Yubico.com +#define UHS_VID_IMMANUEL_ELECTRONICS 0x1053U // Immanuel Electronics Co., Ltd +#define UHS_VID_BMS_INTERNATIONAL_BEHEER_NV 0x1054U // BMS International Beheer N.V. +#define UHS_VID_COMPLEX_MICRO_INTERCONNECTION 0x1055U // Complex Micro Interconnection Co., Ltd +#define UHS_VID_HSIN_CHEN_ENT 0x1056U // Hsin Chen Ent Co., Ltd +#define UHS_VID_ON_SEMICONDUCTOR 0x1057U // ON Semiconductor +#define UHS_VID_WESTERN_DIGITAL_TECHNOLOGIES 0x1058U // Western Digital Technologies, Inc. +#define UHS_VID_GIESECKE_AND_DEVRIENT 0x1059U // Giesecke & Devrient GmbH +#define UHS_VID_FOXCONN_INTERNATIONAL 0x105bU // Foxconn International, Inc. +#define UHS_VID_HONG_JI_ELECTRIC_WIRE_AND_CABLE_DONGGUAN 0x105cU // Hong Ji Electric Wire & Cable (Dongguan) Co., Ltd +#define UHS_VID_DELKIN_DEVICES 0x105dU // Delkin Devices, Inc. +#define UHS_VID_VALENCE_SEMICONDUCTOR_DESIGN 0x105eU // Valence Semiconductor Design, Ltd +#define UHS_VID_CHIN_SHONG_ENTERPRISE 0x105fU // Chin Shong Enterprise Co., Ltd +#define UHS_VID_EASTHOME_INDUSTRIAL 0x1060U // Easthome Industrial Co., Ltd +#define UHS_VID_MOTOROLA_ELECTRONICS_TAIWAN_LTD_HEX_ 0x1063U // Motorola Electronics Taiwan, Ltd [hex] +#define UHS_VID_CCYU_TECHNOLOGY 0x1065U // CCYU Technology +#define UHS_VID_LOYAL_LEGEND 0x106aU // Loyal Legend, Ltd +#define UHS_VID_CURITEL_COMMUNICATIONS 0x106cU // Curitel Communications, Inc. +#define UHS_VID_SAN_CHIEH_MANUFACTURING 0x106dU // San Chieh Manufacturing, Ltd +#define UHS_VID_CONECTL 0x106eU // ConectL +#define UHS_VID_MONEY_CONTROLS 0x106fU // Money Controls +#define UHS_VID_GCT_SEMICONDUCTOR 0x1076U // GCT Semiconductor, Inc. +#define UHS_VID_GATEWAY_1 0x107bU // Gateway, Inc. +#define UHS_VID_ARLEC_AUSTRALIA 0x107dU // Arlec Australia, Ltd +#define UHS_VID_MIDORIYA_ELECTRIC 0x107eU // Midoriya Electric Co., Ltd +#define UHS_VID_KIDZMOUSE 0x107fU // KidzMouse, Inc. +#define UHS_VID_SHIN_ETSUKAKEN 0x1082U // Shin-Etsukaken Co., Ltd +#define UHS_VID_CANON_ELECTRONICS 0x1083U // Canon Electronics, Inc. +#define UHS_VID_PANTECH 0x1084U // Pantech Co., Ltd +#define UHS_VID_CHLORIDE_POWER_PROTECTION 0x108aU // Chloride Power Protection +#define UHS_VID_GRAND_TEK_TECHNOLOGY 0x108bU // Grand-tek Technology Co., Ltd +#define UHS_VID_ROBERT_BOSCH 0x108cU // Robert Bosch GmbH +#define UHS_VID_LOTES 0x108eU // Lotes Co., Ltd. +#define UHS_VID_SURFACE_OPTICS 0x1099U // Surface Optics Corp. +#define UHS_VID_DATASOFT_SYSTEMS 0x109aU // DATASOFT Systems GmbH +#define UHS_VID_HISENSE 0x109bU // Hisense +#define UHS_VID_ESOL 0x109fU // eSOL Co., Ltd +#define UHS_VID_HIROTECH 0x10a0U // Hirotech, Inc. +#define UHS_VID_MITSUBISHI_MATERIALS 0x10a3U // Mitsubishi Materials Corp. +#define UHS_VID_SK_TELETECH 0x10a9U // SK Teletech Co., Ltd +#define UHS_VID_CABLES_TO_GO 0x10aaU // Cables To Go +#define UHS_VID_USI 0x10abU // USI Co., Ltd +#define UHS_VID_HONEYWELL 0x10acU // Honeywell, Inc. +#define UHS_VID_PRINCETON_TECHNOLOGY 0x10aeU // Princeton Technology Corp. +#define UHS_VID_LIEBERT 0x10afU // Liebert Corp. +#define UHS_VID_COMODO_PLX_UNKNOWN 0x10b5U // Comodo (PLX?) +#define UHS_VID_DIBCOM 0x10b8U // DiBcom +#define UHS_VID_TM_TECHNOLOGY 0x10bbU // TM Technology, Inc. +#define UHS_VID_DINGING_TECHNOLOGY 0x10bcU // Dinging Technology Co., Ltd +#define UHS_VID_TMT_TECHNOLOGY 0x10bdU // TMT Technology, Inc. +#define UHS_VID_SMARTHOME 0x10bfU // SmartHome +#define UHS_VID_UNIVERSAL_LASER_SYSTEMS 0x10c3U // Universal Laser Systems, Inc. +#define UHS_VID_CYGNAL_INTEGRATED_PRODUCTS 0x10c4U // Cygnal Integrated Products, Inc. +#define UHS_VID_SANEI_ELECTRIC 0x10c5U // Sanei Electric, Inc. +#define UHS_VID_INTEC 0x10c6U // Intec, Inc. +#define UHS_VID_ERATECH 0x10cbU // Eratech +#define UHS_VID_GBM_CONNECTOR 0x10ccU // GBM Connector Co., Ltd +#define UHS_VID_KYCON 0x10cdU // Kycon, Inc. +#define UHS_VID_SILICON_LABS 0x10ceU // Silicon Labs +#define UHS_VID_VELLEMAN_COMPONENTS 0x10cfU // Velleman Components, Inc. +#define UHS_VID_HOTTINGER_BALDWIN_MEASUREMENT 0x10d1U // Hottinger Baldwin Measurement +#define UHS_VID_RAYCOMPOSER__R_ADAMS 0x10d2U // RayComposer - R. Adams +#define UHS_VID_MAN_BOON_MANUFACTORY 0x10d4U // Man Boon Manufactory, Ltd +#define UHS_VID_UNI_CLASS_TECHNOLOGY 0x10d5U // Uni Class Technology Co., Ltd +#define UHS_VID_ACTIONS_SEMICONDUCTOR 0x10d6U // Actions Semiconductor Co., Ltd +#define UHS_VID_AUTHENEX 0x10deU // Authenex, Inc. +#define UHS_VID_IN_WIN_DEVELOPMENT 0x10dfU // In-Win Development, Inc. +#define UHS_VID_POST_OP_VIDEO 0x10e0U // Post-Op Video, Inc. +#define UHS_VID_CABLEPLUS 0x10e1U // CablePlus, Ltd +#define UHS_VID_NADA_ELECTRONICS 0x10e2U // Nada Electronics, Ltd +#define UHS_VID_VAST_TECHNOLOGIES 0x10ecU // Vast Technologies, Inc. +#define UHS_VID_NEXIO 0x10f0U // Nexio Co., Ltd +#define UHS_VID_IMPORTEK 0x10f1U // Importek +#define UHS_VID_TURTLE_BEACH 0x10f5U // Turtle Beach +#define UHS_VID_PICTOS_TECHNOLOGIES 0x10fbU // Pictos Technologies, Inc. +#define UHS_VID_ANUBIS_ELECTRONICS 0x10fdU // Anubis Electronics, Ltd +#define UHS_VID_THRANE_AND_THRANE 0x10feU // Thrane & Thrane +#define UHS_VID_VIRTOUCH 0x1100U // VirTouch, Ltd +#define UHS_VID_EASYPASS_INDUSTRIAL 0x1101U // EasyPass Industrial Co., Ltd +#define UHS_VID_BRIGHTCOM_TECHNOLOGIES 0x1108U // Brightcom Technologies, Ltd +#define UHS_VID_MOXA_TECHNOLOGIES 0x110aU // Moxa Technologies Co., Ltd. +#define UHS_VID_ANALOG_DEVICES_CANADA_LTD_ALLIED_TELESYN 0x1110U // Analog Devices Canada, Ltd (Allied Telesyn) +#define UHS_VID_PANDORA_INTERNATIONAL 0x1111U // Pandora International Ltd. +#define UHS_VID_YM_ELECTRIC 0x1112U // YM ELECTRIC CO., Ltd +#define UHS_VID_MEDION_AG 0x1113U // Medion AG +#define UHS_VID_VSO_ELECTRIC 0x111eU // VSO Electric Co., Ltd +#define UHS_VID_REDRAT 0x112aU // RedRat +#define UHS_VID_MASTER_HILL_ELECTRIC_WIRE_AND_CABLE 0x112eU // Master Hill Electric Wire and Cable Co., Ltd +#define UHS_VID_CELLON_INTERNATIONAL 0x112fU // Cellon International, Inc. +#define UHS_VID_TENX_TECHNOLOGY 0x1130U // Tenx Technology, Inc. +#define UHS_VID_INTEGRATED_SYSTEM_SOLUTION 0x1131U // Integrated System Solution Corp. +#define UHS_VID_TOSHIBA_CORP_DIGITAL_MEDIA_EQUIPMENT_HEX_ 0x1132U // Toshiba Corp., Digital Media Equipment [hex] +#define UHS_VID_CTS_ELECTRONINCS 0x1136U // CTS Electronincs +#define UHS_VID_ARIN_TECH 0x113cU // Arin Tech Co., Ltd +#define UHS_VID_MAPOWER_ELECTRONICS 0x113dU // Mapower Electronics Co., Ltd +#define UHS_VID_V_ONE_MULTIMEDIA_PTE 0x1141U // V One Multimedia, Pte., Ltd +#define UHS_VID_CYBERSCAN_TECHNOLOGIES 0x1142U // CyberScan Technologies, Inc. +#define UHS_VID_JAPAN_RADIO_COMPANY 0x1145U // Japan Radio Company +#define UHS_VID_SHIMANE_SANYO_ELECTRIC 0x1146U // Shimane SANYO Electric Co., Ltd. +#define UHS_VID_EVER_GREAT_ELECTRIC_WIRE_AND_CABLE 0x1147U // Ever Great Electric Wire and Cable Co., Ltd +#define UHS_VID_SPHAIRON_ACCESS_SYSTEMS 0x114bU // Sphairon Access Systems GmbH +#define UHS_VID_TINIUS_OLSEN_TESTING_MACHINE 0x114cU // Tinius Olsen Testing Machine Co., Inc. +#define UHS_VID_ALPHA_IMAGING_TECHNOLOGY 0x114dU // Alpha Imaging Technology Corp. +#define UHS_VID_WAVECOM 0x114fU // Wavecom +#define UHS_VID_SALIX_TECHNOLOGY 0x115bU // Salix Technology Co., Ltd. +#define UHS_VID_SECUGEN 0x1162U // Secugen Corp. +#define UHS_VID_DELORME_PUBLISHING 0x1163U // DeLorme Publishing, Inc. +#define UHS_VID_YUAN_HIGH_TECH_DEVELOPMENT 0x1164U // YUAN High-Tech Development Co., Ltd +#define UHS_VID_TELSON_ELECTRONICS 0x1165U // Telson Electronics Co., Ltd +#define UHS_VID_BANTAM_INTERACTIVE_TECHNOLOGIES 0x1166U // Bantam Interactive Technologies +#define UHS_VID_SALIENT_SYSTEMS 0x1167U // Salient Systems Corp. +#define UHS_VID_BIZCONN_INTERNATIONAL 0x1168U // BizConn International Corp. +#define UHS_VID_GIGASTORAGE 0x116eU // Gigastorage Corp. +#define UHS_VID_SILICON_10_TECHNOLOGY 0x116fU // Silicon 10 Technology Corp. +#define UHS_VID_SHENGYIH_STEEL_MOLD 0x1175U // Shengyih Steel Mold Co., Ltd +#define UHS_VID_SANTA_ELECTRONIC 0x117dU // Santa Electronic, Inc. +#define UHS_VID_JNC 0x117eU // JNC, Inc. +#define UHS_VID_VENTURE 0x1182U // Venture Corp., Ltd +#define UHS_VID_COMPAQ_COMPUTER_CORP_HEX_DIGITAL_DREAM_UNKNOWN 0x1183U // Compaq Computer Corp. [hex] (Digital Dream ?) +#define UHS_VID_KYOCERA_ELCO 0x1184U // Kyocera Elco Corp. +#define UHS_VID_BLOOMBERG_LP 0x1188U // Bloomberg L.P. +#define UHS_VID_ACER_COMMUNICATIONS_AND_MULTIMEDIA 0x1189U // Acer Communications & Multimedia +#define UHS_VID_YOU_YANG_TECHNOLOGY 0x118fU // You Yang Technology Co., Ltd +#define UHS_VID_TRIPACE 0x1190U // Tripace +#define UHS_VID_LOYALTY_FOUNDER_ENTERPRISE 0x1191U // Loyalty Founder Enterprise Co., Ltd +#define UHS_VID_YANKEE_ROBOTICS 0x1196U // Yankee Robotics, LLC +#define UHS_VID_TECHNOIMAGIA 0x1197U // Technoimagia Co., Ltd +#define UHS_VID_STARSHINE_TECHNOLOGY 0x1198U // StarShine Technology Corp. +#define UHS_VID_SIERRA_WIRELESS 0x1199U // Sierra Wireless, Inc. +#define UHS_VID_ZHAN_QI_TECHNOLOGY 0x119aU // ZHAN QI Technology Co., Ltd +#define UHS_VID_RUWIDO_AUSTRIA 0x119bU // ruwido austria GmbH +#define UHS_VID_CHIPCON_AS 0x11a0U // Chipcon AS +#define UHS_VID_TECHNOVAS 0x11a3U // Technovas Co., Ltd +#define UHS_VID_GLOBALMEDIA_GROUP 0x11aaU // GlobalMedia Group, LLC +#define UHS_VID_EXITO_ELECTRONICS 0x11abU // Exito Electronics Co., Ltd +#define UHS_VID_NIKE 0x11acU // Nike +#define UHS_VID_ATECH_FLASH_TECHNOLOGY 0x11b0U // ATECH FLASH TECHNOLOGY +#define UHS_VID_RANDD_INTERNATIONAL_NV 0x11beU // R&D International NV +#define UHS_VID_INMAX 0x11c5U // Inmax +#define UHS_VID_VERIFONE 0x11caU // VeriFone Inc +#define UHS_VID_TOPFIELD 0x11dbU // Topfield Co., Ltd. +#define UHS_VID_KI_TECHNOLOGY 0x11e6U // K.I. Technology Co. Ltd. +#define UHS_VID_SIEMENS_AG_1 0x11f5U // Siemens AG +#define UHS_VID_PROLIFIC 0x11f6U // Prolific +#define UHS_VID_ALCATEL_UNKNOWN 0x11f7U // Alcatel (?) +#define UHS_VID_TSC_AUTO_ID_TECHNOLOGY 0x1203U // TSC Auto ID Technology Co., Ltd +#define UHS_VID_INTERBIOMETRICS 0x1209U // InterBiometrics +#define UHS_VID_HUDSON_SOFT 0x120eU // Hudson Soft Co., Ltd +#define UHS_VID_MAGELLAN 0x120fU // Magellan +#define UHS_VID_DIGITECH 0x1210U // DigiTech +#define UHS_VID_JUNGSOFT 0x121eU // Jungsoft Co., Ltd +#define UHS_VID_UNKNOWN_MANUFACTURER_1 0x1221U // Unknown manufacturer +#define UHS_VID_SKYCABLE_ENTERPRISE 0x1223U // SKYCABLE ENTERPRISE. CO., LTD. +#define UHS_VID_DATAPAQ_LIMITED 0x1228U // Datapaq Limited +#define UHS_VID_CHIPIDEA_MICROELECTRONICA 0x1230U // Chipidea-Microelectronica, S.A. +#define UHS_VID_DENVER_ELECTRONICS 0x1233U // Denver Electronics +#define UHS_VID_BRAIN_ACTUATED_TECHNOLOGIES 0x1234U // Brain Actuated Technologies +#define UHS_VID_FOCUSRITE_NOVATION 0x1235U // Focusrite-Novation +#define UHS_VID_BELKIN 0x1241U // Belkin +#define UHS_VID_AIRVAST 0x124aU // AirVast +#define UHS_VID_NYKO_HONEY_BEE 0x124bU // Nyko (Honey Bee) +#define UHS_VID_MXI__MEMORY_EXPERTS_INTERNATIONAL 0x124cU // MXI - Memory Experts International, Inc. +#define UHS_VID_APOGEE 0x125cU // Apogee Inc. +#define UHS_VID_A_DATA_TECHNOLOGY 0x125fU // A-DATA Technology Co., Ltd. +#define UHS_VID_STANDARD_MICROSYSTEMS_3 0x1260U // Standard Microsystems Corp. +#define UHS_VID_COVIDIEN_ENERGY_BASED_DEVICES 0x1264U // Covidien Energy-based Devices +#define UHS_VID_PIRELLI_BROADBAND_SOLUTIONS 0x1266U // Pirelli Broadband Solutions +#define UHS_VID_LOGIC3_SPECTRAVIDEO_PLC 0x1267U // Logic3 / SpectraVideo plc +#define UHS_VID_ARISTOCRAT_TECHNOLOGIES 0x126cU // Aristocrat Technologies +#define UHS_VID_BEL_STEWART 0x126dU // Bel Stewart +#define UHS_VID_STROBE_DATA 0x126eU // Strobe Data, Inc. +#define UHS_VID_TWINMOS 0x126fU // TwinMOS +#define UHS_VID_ENSONIQ 0x1274U // Ensoniq +#define UHS_VID_XAXERO_MARINE_SOFTWARE_ENGINEERING 0x1275U // Xaxero Marine Software Engineering, Ltd. +#define UHS_VID_STARLIGHT_XPRESS 0x1278U // Starlight Xpress +#define UHS_VID_ZEBRIS_MEDICAL 0x1283U // zebris Medical GmbH +#define UHS_VID_MARVELL_SEMICONDUCTOR 0x1286U // Marvell Semiconductor, Inc. +#define UHS_VID_QUALCOMM_FLARION_TECHNOLOGIES_INC_LEADTEK_RESEARCH 0x1291U // Qualcomm Flarion Technologies, Inc. / Leadtek Research, Inc. +#define UHS_VID_INNOMEDIA_1 0x1292U // Innomedia +#define UHS_VID_BELKIN_COMPONENTS_HEX_ 0x1293U // Belkin Components [hex] +#define UHS_VID_RISO_KAGAKU 0x1294U // RISO KAGAKU CORP. +#define UHS_VID_CYBERTAN_TECHNOLOGY 0x129bU // CyberTAN Technology +#define UHS_VID_TRENDCHIP_TECHNOLOGIES 0x12a7U // Trendchip Technologies Corp. +#define UHS_VID_HONEY_BEE_ELECTRONIC_INTERNATIONAL 0x12abU // Honey Bee Electronic International Ltd. +#define UHS_VID_ZHEJIANG_XINYA_ELECTRONIC_TECHNOLOGY 0x12b8U // Zhejiang Xinya Electronic Technology Co., Ltd. +#define UHS_VID_E28 0x12b9U // E28 +#define UHS_VID_LICENSED_BY_SONY_COMPUTER_ENTERTAINMENT_AMERICA 0x12baU // Licensed by Sony Computer Entertainment America +#define UHS_VID_GEMBIRD 0x12bdU // Gembird +#define UHS_VID_AUTOCUE_GROUP 0x12c4U // Autocue Group Ltd +#define UHS_VID_DEXIN_1 0x12cfU // DEXIN +#define UHS_VID_HUAWEI_TECHNOLOGIES 0x12d1U // Huawei Technologies Co., Ltd. +#define UHS_VID_LINE_TECH_INDUSTRIAL 0x12d2U // LINE TECH INDUSTRIAL CO., LTD. +#define UHS_VID_EMS_DR_THOMAS_WUENSCHE 0x12d6U // EMS Dr. Thomas Wuensche +#define UHS_VID_BETTER_WIRE_FACTORY 0x12d7U // BETTER WIRE FACTORY CO., LTD. +#define UHS_VID_ARANEUS_INFORMATION_SYSTEMS_OY 0x12d8U // Araneus Information Systems Oy +#define UHS_VID_WALDORF_MUSIC 0x12e6U // Waldorf Music GmbH +#define UHS_VID_TAPWAVE 0x12efU // Tapwave, Inc. +#define UHS_VID_DYNAMIC_SYSTEM_ELECTRONICS 0x12f5U // Dynamic System Electronics Corp. +#define UHS_VID_MEMOREX_PRODUCTS 0x12f7U // Memorex Products, Inc. +#define UHS_VID_AIN_COMM_TECHNOLOGY 0x12fdU // AIN Comm. Technology Co., Ltd +#define UHS_VID_FASCINATING_ELECTRONICS 0x12ffU // Fascinating Electronics, Inc. +#define UHS_VID_TRANSCEND_INFORMATION 0x1307U // Transcend Information, Inc. +#define UHS_VID_SHUTTLE_1 0x1308U // Shuttle, Inc. +#define UHS_VID_ROPER 0x1310U // Roper +#define UHS_VID_ICS_ELECTRONICS 0x1312U // ICS Electronics +#define UHS_VID_THORLABS 0x1313U // ThorLabs +#define UHS_VID_NATURAL_POINT 0x131dU // Natural Point +#define UHS_VID_ENVARA 0x132aU // Envara Inc. +#define UHS_VID_KONICA_MINOLTA 0x132bU // Konica Minolta +#define UHS_VID_KEMPER_DIGITAL 0x133eU // Kemper Digital GmbH +#define UHS_VID_MOBILITY 0x1342U // Mobility +#define UHS_VID_CITIZEN_SYSTEMS 0x1343U // Citizen Systems +#define UHS_VID_SINO_LITE_TECHNOLOGY 0x1345U // Sino Lite Technology Corp. +#define UHS_VID_MORAVIAN_INSTRUMENTS 0x1347U // Moravian Instruments +#define UHS_VID_KATSURAGAWA_ELECTRIC 0x1348U // Katsuragawa Electric Co., Ltd. +#define UHS_VID_PANJIT_INTERNATIONAL 0x134cU // PanJit International Inc. +#define UHS_VID_DIGBYS_BITPILE_INC_DBA_D_BIT 0x134eU // Digby's Bitpile, Inc. DBA D Bit +#define UHS_VID_PANDE_MICROCOMPUTER_SYSTEMS 0x1357U // P&E Microcomputer Systems +#define UHS_VID_CONTROL_DEVELOPMENT 0x135fU // Control Development Inc. +#define UHS_VID_SEGGER 0x1366U // SEGGER +#define UHS_VID_STEC 0x136bU // STEC +#define UHS_VID_ANDOR_TECHNOLOGY 0x136eU // Andor Technology Ltd. +#define UHS_VID_SWISSBIT 0x1370U // Swissbit +#define UHS_VID_CNET_TECHNOLOGY 0x1371U // CNet Technology Inc. +#define UHS_VID_VIMTRON_ELECTRONICS 0x1376U // Vimtron Electronics Co., Ltd. +#define UHS_VID_SCAPS 0x137bU // SCAPS GmbH +#define UHS_VID_NETGEAR_2 0x1385U // Netgear, Inc +#define UHS_VID_VALIDITY_SENSORS 0x138aU // Validity Sensors, Inc. +#define UHS_VID_JUNGO 0x138eU // Jungo LTD +#define UHS_VID_TOMTOM_BV 0x1390U // TOMTOM B.V. +#define UHS_VID_IDEALTEK 0x1391U // IdealTEK, Inc. +#define UHS_VID_SENNHEISER_COMMUNICATIONS 0x1395U // Sennheiser Communications +#define UHS_VID_BEHRINGER_INTERNATIONAL 0x1397U // BEHRINGER International GmbH +#define UHS_VID_Q_TEC 0x1398U // Q-tec +#define UHS_VID_BALTECH 0x13adU // Baltech +#define UHS_VID_PERKINELMER_OPTOELECTRONICS 0x13b0U // PerkinElmer Optoelectronics +#define UHS_VID_LINKSYS_2 0x13b1U // Linksys +#define UHS_VID_ALESIS 0x13b2U // Alesis +#define UHS_VID_NIPPON_DICS 0x13b3U // Nippon Dics Co., Ltd. +#define UHS_VID_PCPLAY 0x13baU // PCPlay +#define UHS_VID_RICOH_PRINTING_SYSTEMS 0x13beU // Ricoh Printing Systems, Ltd. +#define UHS_VID_JYETAI_PRECISION_INDUSTRIAL 0x13caU // JyeTai Precision Industrial Co., Ltd. +#define UHS_VID_WISAIR 0x13cfU // Wisair Ltd. +#define UHS_VID_TECHSAN_ELECTRONICS 0x13d0U // Techsan Electronics Co., Ltd. +#define UHS_VID_A_MAX_TECHNOLOGY_MACAO_COMMERCIAL_OFFSHORE 0x13d1U // A-Max Technology Macao Commercial Offshore Co. Ltd. +#define UHS_VID_SHARK_MULTIMEDIA_1 0x13d2U // Shark Multimedia +#define UHS_VID_IMC_NETWORKS 0x13d3U // IMC Networks +#define UHS_VID_GUIDANCE_SOFTWARE 0x13d7U // Guidance Software, Inc. +#define UHS_VID_ALEREON 0x13dcU // ALEREON, INC. +#define UHS_VID_ITECH_DYNAMIC_LIMITED 0x13ddU // i.Tech Dynamic Limited +#define UHS_VID_KAIBO_WIRE_AND_CABLE_SHENZHEN 0x13e1U // Kaibo Wire & Cable (Shenzhen) Co., Ltd. +#define UHS_VID_RANE 0x13e5U // Rane +#define UHS_VID_TECHNOSCOPE 0x13e6U // TechnoScope Co., Ltd. +#define UHS_VID_HENGSTLER 0x13eaU // Hengstler +#define UHS_VID_ZYDACRON 0x13ecU // Zydacron +#define UHS_VID_MOSART 0x13eeU // MosArt +#define UHS_VID_INITIO_CORPORATION 0x13fdU // Initio Corporation +#define UHS_VID_KINGSTON_TECHNOLOGY_COMPANY_1 0x13feU // Kingston Technology Company Inc. +#define UHS_VID_AXXION_GROUP 0x1400U // Axxion Group Corp. +#define UHS_VID_BOWE_BELL_AND_HOWELL 0x1402U // Bowe Bell & Howell +#define UHS_VID_SITRONIX 0x1403U // Sitronix +#define UHS_VID_IDS_IMAGING_DEVELOPMENT_SYSTEMS 0x1409U // IDS Imaging Development Systems GmbH +#define UHS_VID_TELECHIPS 0x140eU // Telechips, Inc. +#define UHS_VID_NOVATEL_WIRELESS_1 0x1410U // Novatel Wireless +#define UHS_VID_NAM_TAI_EANDE_PRODUCTS_LTD_OR_OMNIVISION_TECHNOLOGIES 0x1415U // Nam Tai E&E Products Ltd. or OmniVision Technologies, Inc. +#define UHS_VID_ABILITY_ENTERPRISE 0x1419U // ABILITY ENTERPRISE CO., LTD. +#define UHS_VID_SENSOR_TECHNOLOGY 0x1421U // Sensor Technology +#define UHS_VID_VEGA_TECHNOLOGIES_INDUSTRIAL_AUSTRIA 0x1429U // Vega Technologies Industrial (Austria) Co. +#define UHS_VID_THALES_E_TRANSACTIONS 0x142aU // Thales E-Transactions +#define UHS_VID_ARBITER_SYSTEMS 0x142bU // Arbiter Systems, Inc. +#define UHS_VID_REDOCTANE 0x1430U // RedOctane +#define UHS_VID_PERTECH_RESOURCES 0x1431U // Pertech Resources, Inc. +#define UHS_VID_WISTRON_NEWEB 0x1435U // Wistron NeWeb +#define UHS_VID_DENALI_SOFTWARE 0x1436U // Denali Software, Inc. +#define UHS_VID_ALTEK_CORPORATION 0x143cU // Altek Corporation +#define UHS_VID_DIGILENT 0x1443U // Digilent +#define UHS_VID_XJGROUP 0x1446U // X.J.GROUP +#define UHS_VID_RADIO_SHACK 0x1453U // Radio Shack +#define UHS_VID_EXTENDING_WIRE_AND_CABLE 0x1456U // Extending Wire & Cable Co., Ltd. +#define UHS_VID_FIRST_INTERNATIONAL_COMPUTER_1 0x1457U // First International Computer, Inc. +#define UHS_VID_TRUST 0x145fU // Trust +#define UHS_VID_TATUNG 0x1460U // Tatung Co. +#define UHS_VID_STACCATO_COMMUNICATIONS 0x1461U // Staccato Communications +#define UHS_VID_MICRO_STAR_INTERNATIONAL_1 0x1462U // Micro Star International +#define UHS_VID_HUAWEI_3COM 0x1472U // Huawei-3Com +#define UHS_VID_FORMOSA_INDUSTRIAL_COMPUTING 0x147aU // Formosa Industrial Computing, Inc. +#define UHS_VID_UPEK 0x147eU // Upek +#define UHS_VID_HAMA_GMBH_AND_CO_KG 0x147fU // Hama GmbH & Co., KG +#define UHS_VID_VAILLANT 0x1482U // Vaillant +#define UHS_VID_ELSA_AG_HEX_ 0x1484U // Elsa AG [hex] +#define UHS_VID_SILICOM_1 0x1485U // Silicom +#define UHS_VID_DSP_GROUP 0x1487U // DSP Group, Ltd. +#define UHS_VID_EVATRONIX 0x148eU // EVATRONIX SA +#define UHS_VID_RALINK_TECHNOLOGY 0x148fU // Ralink Technology, Corp. +#define UHS_VID_FUTRONIC_TECHNOLOGY 0x1491U // Futronic Technology Co. Ltd. +#define UHS_VID_SUUNTO 0x1493U // Suunto +#define UHS_VID_PANSTRONG_COMPANY 0x1497U // Panstrong Company Ltd. +#define UHS_VID_MICROTEK_INTERNATIONAL_1 0x1498U // Microtek International Inc. +#define UHS_VID_IMAGINATION_TECHNOLOGIES 0x149aU // Imagination Technologies +#define UHS_VID_WIDEVIEW_TECHNOLOGY 0x14aaU // WideView Technology Inc. +#define UHS_VID_CTK_CORPORATION 0x14adU // CTK Corporation +#define UHS_VID_PRINTRONIX 0x14aeU // Printronix Inc. +#define UHS_VID_ATP_ELECTRONICS 0x14afU // ATP Electronics Inc. +#define UHS_VID_STARTECHCOM 0x14b0U // StarTech.com Ltd. +#define UHS_VID_RALINK_TECHNOLOGY_1 0x14b2U // Ralink Technology, Corp. +#define UHS_VID_ROCKWELL_AUTOMATION 0x14c0U // Rockwell Automation, Inc. +#define UHS_VID_GEMLIGHT_COMPUTER 0x14c2U // Gemlight Computer, Ltd +#define UHS_VID_ZYTRONIC 0x14c8U // Zytronic +#define UHS_VID_SUPER_TOP 0x14cdU // Super Top +#define UHS_VID_JAMER_INDUSTRIES 0x14d8U // JAMER INDUSTRIES CO., LTD. +#define UHS_VID_RARITAN_COMPUTER 0x14ddU // Raritan Computer, Inc. +#define UHS_VID_WINRADIO_COMMUNICATIONS 0x14e0U // WiNRADiO Communications +#define UHS_VID_DIALOGUE_TECHNOLOGY 0x14e1U // Dialogue Technology Corp. +#define UHS_VID_SAIN_INFORMATION_AND_COMMUNICATIONS 0x14e5U // SAIN Information & Communications Co., Ltd. +#define UHS_VID_PLANEX_COMMUNICATIONS_1 0x14eaU // Planex Communications +#define UHS_VID_SHURE 0x14edU // Shure Inc. +#define UHS_VID_TECHNISAT_DIGITAL 0x14f7U // TechniSat Digital GmbH +#define UHS_VID_ELLISYS_1 0x1500U // Ellisys +#define UHS_VID_PINE_TUM_ENTERPRISE 0x1501U // Pine-Tum Enterprise Co., Ltd. +#define UHS_VID_FIRST_INTERNATIONAL_COMPUTER_2 0x1509U // First International Computer, Inc. +#define UHS_VID_MEDMOBILE 0x1513U // medMobile +#define UHS_VID_ACTEL 0x1514U // Actel +#define UHS_VID_COMPUSA 0x1516U // CompUSA +#define UHS_VID_CHESHIRE_ENGINEERING 0x1518U // Cheshire Engineering Corp. +#define UHS_VID_COMNEON 0x1519U // Comneon +#define UHS_VID_BITWIRE 0x1520U // Bitwire Corp. +#define UHS_VID_ENE_TECHNOLOGY_1 0x1524U // ENE Technology Inc +#define UHS_VID_SILICON_PORTALS 0x1527U // Silicon Portals +#define UHS_VID_UBIQUAM 0x1529U // UBIQUAM Co., Ltd. +#define UHS_VID_THESYCON_SYSTEMSOFTWARE_AND_CONSULTING 0x152aU // Thesycon Systemsoftware & Consulting GmbH +#define UHS_VID_MIR_SRL 0x152bU // MIR Srl +#define UHS_VID_JMICRON_TECHNOLOGY_CORP_JMICRON_USA_TECHNOLOGY 0x152dU // JMicron Technology Corp. / JMicron USA Technology Corp. +#define UHS_VID_LG_HLDS 0x152eU // LG (HLDS) +#define UHS_VID_RAZER_USA 0x1532U // Razer USA, Ltd +#define UHS_VID_TERRATEC_ELECTRONIC_1 0x153bU // TerraTec Electronic GmbH +#define UHS_VID_U_BLOX_AG 0x1546U // U-Blox AG +#define UHS_VID_SG_INTEC_LTD_AND_CO_KG 0x1547U // SG Intec Ltd & Co KG +#define UHS_VID_CELECTRONIC 0x154aU // Celectronic GmbH +#define UHS_VID_PNY 0x154bU // PNY +#define UHS_VID_CONNECTCOUNTY_HOLDINGS_BERHAD 0x154dU // ConnectCounty Holdings Berhad +#define UHS_VID_DANDM_HOLDINGS_INC_DENONMARANTZ 0x154eU // D&M Holdings, Inc. (Denon/Marantz) +#define UHS_VID_SNBC 0x154fU // SNBC CO., Ltd +#define UHS_VID_PROLINK_MICROSYSTEMS 0x1554U // Prolink Microsystems Corp. +#define UHS_VID_OQO 0x1557U // OQO +#define UHS_VID_SUNF_PU_TECHNOLOGY 0x1568U // Sunf Pu Technology Co., Ltd +#define UHS_VID_QUANTUM_CORPORATION 0x156fU // Quantum Corporation +#define UHS_VID_ALLTOP_TECHNOLOGY 0x1570U // ALLTOP TECHNOLOGY CO., LTD. +#define UHS_VID_KETRON_SRL 0x157bU // Ketron SRL +#define UHS_VID_TRENDNET 0x157eU // TRENDnet +#define UHS_VID_FIBERLINE 0x1582U // Fiberline +#define UHS_VID_SMA_TECHNOLOGIE_AG 0x1587U // SMA Technologie AG +#define UHS_VID_OAKLEY 0x158dU // Oakley Inc. +#define UHS_VID_JDS_UNIPHASE_CORPORATION_JDSU 0x158eU // JDS Uniphase Corporation (JDSU) +#define UHS_VID_KUNSHAN_GUOJI_ELECTRONICS 0x1598U // Kunshan Guoji Electronics Co., Ltd. +#define UHS_VID_FREESCALE_SEMICONDUCTOR 0x15a2U // Freescale Semiconductor, Inc. +#define UHS_VID_AFATECH_TECHNOLOGIES 0x15a4U // Afatech Technologies, Inc. +#define UHS_VID_TEAMS_POWER_LIMITED 0x15a8U // Teams Power Limited +#define UHS_VID_GEMTEK 0x15a9U // Gemtek +#define UHS_VID_GEARWAY_ELECTRONICS_DONG_GUAN 0x15aaU // Gearway Electronics (Dong Guan) Co., Ltd. +#define UHS_VID_VMWARE_1 0x15adU // VMware Inc. +#define UHS_VID_OLIMEX 0x15baU // Olimex Ltd. +#define UHS_VID_XL_IMAGING 0x15c0U // XL Imaging +#define UHS_VID_SOUNDGRAPH 0x15c2U // SoundGraph Inc. +#define UHS_VID_ADVANCE_MULTIMEDIA_INTERNET_TECHNOLOGY_INC_AMIT 0x15c5U // Advance Multimedia Internet Technology Inc. (AMIT) +#define UHS_VID_LABORATOIRES_MXM 0x15c6U // Laboratoires MXM +#define UHS_VID_KTF_TECHNOLOGIES 0x15c8U // KTF Technologies +#define UHS_VID_D_BOX_TECHNOLOGIES 0x15c9U // D-Box Technologies +#define UHS_VID_TEXTECH_INTERNATIONAL 0x15caU // Textech International Ltd. +#define UHS_VID_COULOMB_ELECTRONICS 0x15d5U // Coulomb Electronics Ltd. +#define UHS_VID_TRUST_INTERNATIONAL_BV_1 0x15d9U // Trust International B.V. +#define UHS_VID_HYNIX_SEMICONDUCTOR 0x15dcU // Hynix Semiconductor Inc. +#define UHS_VID_SEONG_JI_INDUSTRIAL 0x15e0U // Seong Ji Industrial Co., Ltd. +#define UHS_VID_RSA 0x15e1U // RSA +#define UHS_VID_NUMARK 0x15e4U // Numark +#define UHS_VID_SOHOWARE 0x15e8U // SohoWare +#define UHS_VID_PACIFIC_DIGITAL 0x15e9U // Pacific Digital Corp. +#define UHS_VID_BELCARRA_TECHNOLOGIES 0x15ecU // Belcarra Technologies Corp. +#define UHS_VID_HANFTEK 0x15f4U // HanfTek +#define UHS_VID_TASCAM 0x1604U // Tascam +#define UHS_VID_UMAX_1 0x1606U // Umax +#define UHS_VID_INSIDE_OUT_NETWORKS_HEX_ 0x1608U // Inside Out Networks [hex] +#define UHS_VID_VIA_TECHNOLOGIES_1 0x160aU // VIA Technologies, Inc. +#define UHS_VID_INRO 0x160eU // INRO +#define UHS_VID_AMOI_ELECTRONICS 0x1614U // Amoi Electronics +#define UHS_VID_SONY_1 0x1617U // Sony Corp. +#define UHS_VID_L_AND_K_PRECISION_TECHNOLOGY 0x1619U // L & K Precision Technology Co., Ltd. +#define UHS_VID_WIONICS_RESEARCH 0x1621U // Wionics Research +#define UHS_VID_STONESTREET_ONE 0x1628U // Stonestreet One, Inc. +#define UHS_VID_AIRGO_NETWORKS 0x162aU // Airgo Networks Inc. +#define UHS_VID_WIQUEST_COMMUNICATIONS 0x162fU // WiQuest Communications, Inc. +#define UHS_VID_2WIRE_1 0x1630U // 2Wire, Inc. +#define UHS_VID_GOOD_WAY_TECHNOLOGY 0x1631U // Good Way Technology +#define UHS_VID_ENTREGA_HEX_ 0x1645U // Entrega [hex] +#define UHS_VID_SOFTEC_MICROSYSTEMS 0x1649U // SofTec Microsystems +#define UHS_VID_CHIPX 0x164aU // ChipX +#define UHS_VID_MATRIX_VISION 0x164cU // Matrix Vision GmbH +#define UHS_VID_STRUCK_INNOVATIVE_SYSTEME 0x1657U // Struck Innovative Systeme GmbH +#define UHS_VID_FRONTIER_DESIGN_GROUP 0x165bU // Frontier Design Group +#define UHS_VID_KONDO_KAGAKU 0x165cU // Kondo Kagaku +#define UHS_VID_CREATIX_POLYMEDIA 0x1660U // Creatix Polymedia GmbH +#define UHS_VID_GIGA_TMS 0x1667U // GIGA-TMS INC. +#define UHS_VID_ACTIONTEC_ELECTRONICS_INC_HEX_ 0x1668U // Actiontec Electronics, Inc. [hex] +#define UHS_VID_PIKRON_LTD_HEX_ 0x1669U // PiKRON Ltd. [hex] +#define UHS_VID_CLIPSAL 0x166aU // Clipsal +#define UHS_VID_CHINA_HUADA_INTEGRATED_CIRCUIT_DESIGN_GROUP_CO_LTD_CIDC_GROUP 0x1677U // China Huada Integrated Circuit Design (Group) Co., Ltd. (CIDC Group) +#define UHS_VID_TOTAL_PHASE 0x1679U // Total Phase +#define UHS_VID_GOLDEN_BRIDGE_ELECTECH_1 0x1680U // Golden Bridge Electech Inc. +#define UHS_VID_PREVO_TECHNOLOGIES 0x1681U // Prevo Technologies, Inc. +#define UHS_VID_MAXWISE_PRODUCTION_ENTERPRISE 0x1682U // Maxwise Production Enterprise Ltd. +#define UHS_VID_GODSPEED_COMPUTER 0x1684U // Godspeed Computer Corp. +#define UHS_VID_DELOCK 0x1685U // Delock +#define UHS_VID_ZOOM_CORPORATION 0x1686U // ZOOM Corporation +#define UHS_VID_KINGMAX_DIGITAL 0x1687U // Kingmax Digital Inc. +#define UHS_VID_SAAB 0x1688U // Saab AB +#define UHS_VID_RAZER_USA_1 0x1689U // Razer USA, Ltd +#define UHS_VID_ATHEROS_COMMUNICATIONS_1 0x168cU // Atheros Communications +#define UHS_VID_ASKEY_COMPUTER_CORP_HEX_ 0x1690U // Askey Computer Corp. [hex] +#define UHS_VID_HITACHI_VIDEO_AND_INFORMATION_SYSTEM 0x1696U // Hitachi Video and Information System, Inc. +#define UHS_VID_VTEC_TEST 0x1697U // VTec Test, Inc. +#define UHS_VID_SHENZHEN_ZHENGERYA_CABLE 0x16a5U // Shenzhen Zhengerya Cable Co., Ltd. +#define UHS_VID_UNIGRAF 0x16a6U // Unigraf +#define UHS_VID_GLOBAL_SUN_TECHNOLOGY_1 0x16abU // Global Sun Technology +#define UHS_VID_DONGGUAN_CHINGLUNG_WIRE_AND_CABLE 0x16acU // Dongguan ChingLung Wire & Cable Co., Ltd. +#define UHS_VID_ISTATION 0x16b4U // iStation +#define UHS_VID_PERSENTEC 0x16b5U // Persentec, Inc. +#define UHS_VID_VAN_OOIJEN_TECHNISCHE_INFORMATICA 0x16c0U // Van Ooijen Technische Informatica +#define UHS_VID_WIRELESS_CABLES 0x16caU // Wireless Cables, Inc. +#define UHS_VID_SILEX_TECHNOLOGY 0x16ccU // silex technology, Inc. +#define UHS_VID_MCS 0x16d0U // MCS +#define UHS_VID_SUPREMA 0x16d1U // Suprema Inc. +#define UHS_VID_FRONTLINE_TEST_EQUIPMENT 0x16d3U // Frontline Test Equipment, Inc. +#define UHS_VID_ANYDATA_CORPORATION 0x16d5U // AnyDATA Corporation +#define UHS_VID_JABLOCOM_SRO 0x16d6U // JABLOCOM s.r.o. +#define UHS_VID_CMOTECH 0x16d8U // CMOTECH Co., Ltd. +#define UHS_VID_WIENER_PLEIN_AND_BAUS 0x16dcU // Wiener, Plein & Baus +#define UHS_VID_KING_BILLION_ELECTRONICS 0x16dfU // King Billion Electronics Co., Ltd. +#define UHS_VID_GN_RESOUND_AS 0x16f0U // GN ReSound A/S +#define UHS_VID_FUTURELOGIC 0x16f5U // Futurelogic Inc. +#define UHS_VID_BLUEVIEW_TECHNOLOGIES 0x1706U // BlueView Technologies, Inc. +#define UHS_VID_ARTIMI 0x1707U // ARTIMI +#define UHS_VID_SWISSONIC 0x170bU // Swissonic +#define UHS_VID_AVNERA 0x170dU // Avnera +#define UHS_VID_LEICA_MICROSYSTEMS 0x1711U // Leica Microsystems +#define UHS_VID_MEYER_INSTRUMENTS_MIS 0x1724U // Meyer Instruments (MIS) +#define UHS_VID_VITESSE_SEMICONDUCTOR 0x1725U // Vitesse Semiconductor +#define UHS_VID_AXESSTEL 0x1726U // Axesstel, Inc. +#define UHS_VID_WALTOP_INTERNATIONAL 0x172fU // Waltop International Corp. +#define UHS_VID_CELLINK_TECHNOLOGY 0x1733U // Cellink Technology Co., Ltd +#define UHS_VID_CANON_IMAGING_SYSTEM_TECHNOLOGIES 0x1736U // CANON IMAGING SYSTEM TECHNOLOGIES INC. +#define UHS_VID_LINKSYS_3 0x1737U // Linksys +#define UHS_VID_QSENN 0x173dU // QSENN +#define UHS_VID_SENAO 0x1740U // Senao +#define UHS_VID_GENERAL_ATOMICS 0x1743U // General Atomics +#define UHS_VID_MQP_ELECTRONICS 0x1748U // MQP Electronics +#define UHS_VID_ASMEDIA_TECHNOLOGY 0x174cU // ASMedia Technology Inc. +#define UHS_VID_SYNTEK 0x174fU // Syntek +#define UHS_VID_GERTEC_TELECOMUNICACOES_LTDA 0x1753U // GERTEC Telecomunicacoes Ltda. +#define UHS_VID_ENENSYS_TECHNOLOGIES 0x1756U // ENENSYS Technologies +#define UHS_VID_LUCIDPORT_TECHNOLOGY 0x1759U // LucidPort Technology, Inc. +#define UHS_VID_ASUSTEK_COMPUTER_INC_WRONG_ID 0x1761U // ASUSTek Computer, Inc. (wrong ID) +#define UHS_VID_SYSTEM_LEVEL_SOLUTIONS 0x1772U // System Level Solutions, Inc. +#define UHS_VID_AROWANA 0x1776U // Arowana +#define UHS_VID_SWEEX 0x177fU // Sweex +#define UHS_VID_MULTIPLE_VENDORS 0x1781U // Multiple Vendors +#define UHS_VID_SPREADTRUM_COMMUNICATIONS 0x1782U // Spreadtrum Communications Inc. +#define UHS_VID_TOPSEED_TECHNOLOGY 0x1784U // TopSeed Technology Corp. +#define UHS_VID_ATI_AIB 0x1787U // ATI AIB +#define UHS_VID_SHENZHEN_LITKCONN_TECHNOLOGY 0x1788U // ShenZhen Litkconn Technology Co., Ltd. +#define UHS_VID_PRINTREX 0x1796U // Printrex, Inc. +#define UHS_VID_JALCO 0x1797U // JALCO CO., LTD. +#define UHS_VID_THALES_NORWAY_AS 0x1799U // Thales Norway A/S +#define UHS_VID_RICAVISION_INTERNATIONAL 0x179dU // Ricavision International, Inc. +#define UHS_VID_SAMSON_TECHNOLOGIES 0x17a0U // Samson Technologies Corp. +#define UHS_VID_CONCEPT2 0x17a4U // Concept2 +#define UHS_VID_ADVANCED_CONNECTION_TECHNOLOGY 0x17a5U // Advanced Connection Technology Inc. +#define UHS_VID_MICOMSOFT 0x17a7U // MICOMSOFT CO., LTD. +#define UHS_VID_KAMSTRUP_AS 0x17a8U // Kamstrup A/S +#define UHS_VID_GREY_INNOVATION 0x17b3U // Grey Innovation +#define UHS_VID_LUNATONE 0x17b5U // Lunatone +#define UHS_VID_SAURIS 0x17baU // SAURIS GmbH +#define UHS_VID_SINGIM_INTERNATIONAL 0x17c3U // Singim International Corp. +#define UHS_VID_NATIVE_INSTRUMENTS 0x17ccU // Native Instruments +#define UHS_VID_HIP_HING_CABLE_AND_PLUG_MFY 0x17cfU // Hip Hing Cable & Plug Mfy. Ltd. +#define UHS_VID_SANFORD_LP 0x17d0U // Sanford L.P. +#define UHS_VID_KOREA_TECHTRON 0x17d3U // Korea Techtron Co., Ltd. +#define UHS_VID_DISPLAYLINK 0x17e9U // DisplayLink +#define UHS_VID_CORNICE 0x17ebU // Cornice, Inc. +#define UHS_VID_LENOVO 0x17efU // Lenovo +#define UHS_VID_WAVESENSE 0x17f4U // WaveSense +#define UHS_VID_KK_ROCKY 0x17f5U // K.K. Rocky +#define UHS_VID_UNICOMP 0x17f6U // Unicomp, Inc +#define UHS_VID_ADVANTECH 0x1809U // Advantech +#define UHS_VID_TWINHAN 0x1822U // Twinhan +#define UHS_VID_GWO_JINN_INDUSTRIES 0x1831U // Gwo Jinn Industries Co., Ltd. +#define UHS_VID_HUIZHOU_SHENGHUA_INDUSTRIAL 0x1832U // Huizhou Shenghua Industrial Co., Ltd. +#define UHS_VID_VIVOPHONE 0x183dU // VIVOphone +#define UHS_VID_VAISALA 0x1843U // Vaisala +#define UHS_VID_ASROCK_INCORPORATION 0x1849U // ASRock Incorporation +#define UHS_VID_GYROCOM_CANDC 0x1852U // GYROCOM C&C Co., LTD +#define UHS_VID_MEMORY_DEVICES 0x1854U // Memory Devices Ltd. +#define UHS_VID_COMPRO 0x185bU // Compro +#define UHS_VID_TECH_TECHNOLOGY_INDUSTRIAL_COMPANY 0x1861U // Tech Technology Industrial Company +#define UHS_VID_TERIDIAN_SEMICONDUCTOR 0x1862U // Teridian Semiconductor Corp. +#define UHS_VID_NEXIO_1 0x1870U // Nexio Co., Ltd +#define UHS_VID_AVEO_TECHNOLOGY 0x1871U // Aveo Technology Corp. +#define UHS_VID_NAVILOCK 0x1873U // Navilock +#define UHS_VID_ALIENWARE_CORPORATION 0x187cU // Alienware Corporation +#define UHS_VID_SIANO_MOBILE_SILICON 0x187fU // Siano Mobile Silicon +#define UHS_VID_VAST_TECHNOLOGIES_1 0x1892U // Vast Technologies, Inc. +#define UHS_VID_TOPSEED 0x1894U // Topseed +#define UHS_VID_EVERTOP_WIRE_CABLE 0x1897U // Evertop Wire Cable Co. +#define UHS_VID_3SHAPE_AS 0x189fU // 3Shape A/S +#define UHS_VID_CSSN 0x18a4U // CSSN +#define UHS_VID_VERBATIM 0x18a5U // Verbatim, Ltd +#define UHS_VID_PETALYNX 0x18b1U // Petalynx +#define UHS_VID_E3C_TECHNOLOGIES 0x18b4U // e3C Technologies +#define UHS_VID_MIKKON_TECHNOLOGY_LIMITED 0x18b6U // Mikkon Technology Limited +#define UHS_VID_ZOTEK_ELECTRONIC 0x18b7U // Zotek Electronic Co., Ltd. +#define UHS_VID_AMIT_TECHNOLOGY 0x18c5U // AMIT Technology, Inc. +#define UHS_VID_ECAMM 0x18cdU // Ecamm +#define UHS_VID_GOOGLE 0x18d1U // Google Inc. +#define UHS_VID_STARLINE_INTERNATIONAL_GROUP_LIMITED 0x18d5U // Starline International Group Limited +#define UHS_VID_KABA 0x18d9U // Kaba +#define UHS_VID_LKC_TECHNOLOGIES 0x18dcU // LKC Technologies, Inc. +#define UHS_VID_PLANON_SYSTEM_SOLUTIONS 0x18ddU // Planon System Solutions Inc. +#define UHS_VID_FITIPOWER_INTEGRATED_TECHNOLOGY 0x18e3U // Fitipower Integrated Technology Inc +#define UHS_VID_QCOM 0x18e8U // Qcom +#define UHS_VID_MATROX_GRAPHICS 0x18eaU // Matrox Graphics, Inc. +#define UHS_VID_ARKMICRO_TECHNOLOGIES 0x18ecU // Arkmicro Technologies Inc. +#define UHS_VID_FINEARCH 0x18fdU // FineArch Inc. +#define UHS_VID_GEMBIRD_1 0x1908U // GEMBIRD +#define UHS_VID_MOTOROLA_GSG 0x190dU // Motorola GSG +#define UHS_VID_ALCO_DIGITAL_DEVICES_LIMITED 0x1914U // Alco Digital Devices Limited +#define UHS_VID_NORDIC_SEMICONDUCTOR_ASA 0x1915U // Nordic Semiconductor ASA +#define UHS_VID_FITLINXX 0x1923U // FitLinxx +#define UHS_VID_NEXTWINDOW 0x1926U // NextWindow +#define UHS_VID_AVAGO_TECHNOLOGIES_PTE 0x192fU // Avago Technologies, Pte. +#define UHS_VID_SHENZHEN_XIANHE_TECHNOLOGY 0x1930U // Shenzhen Xianhe Technology Co., Ltd. +#define UHS_VID_NINGBO_BROAD_TELECOMMUNICATION 0x1931U // Ningbo Broad Telecommunication Co., Ltd. +#define UHS_VID_FEATURE_INTEGRATION_TECHNOLOGY_INC_FINTEK 0x1934U // Feature Integration Technology Inc. (Fintek) +#define UHS_VID_DREAM_LINK 0x1941U // Dream Link +#define UHS_VID_SENSORAY 0x1943U // Sensoray Co., Inc. +#define UHS_VID_LAB126 0x1949U // Lab126, Inc. +#define UHS_VID_PRESONUS_AUDIO_ELECTRONICS 0x194fU // PreSonus Audio Electronics, Inc. +#define UHS_VID_HYPERSTONE_AG 0x1951U // Hyperstone AG +#define UHS_VID_IRONKEY 0x1953U // Ironkey Inc. +#define UHS_VID_RADIIENT_TECHNOLOGIES 0x1954U // Radiient Technologies +#define UHS_VID_ITRON_TECHNOLOGY_IONE 0x195dU // Itron Technology iONE +#define UHS_VID_UNIDEN_CORPORATION 0x1965U // Uniden Corporation +#define UHS_VID_CASIO_HITACHI_MOBILE_COMMUNICATIONS 0x1967U // CASIO HITACHI Mobile Communications Co., Ltd. +#define UHS_VID_WISPRO_TECHNOLOGY 0x196bU // Wispro Technology Inc. +#define UHS_VID_DANE_ELEC_CORP_USA 0x1970U // Dane-Elec Corp. USA +#define UHS_VID_DONGGUAN_GUNEETAL_WIRE_AND_CABLE 0x1975U // Dongguan Guneetal Wire & Cable Co., Ltd. +#define UHS_VID_CHIPSBRAND_MICROELECTRONICS_HK 0x1976U // Chipsbrand Microelectronics (HK) Co., Ltd. +#define UHS_VID_T_LOGIC 0x1977U // T-Logic +#define UHS_VID_LEUZE_ELECTRONIC 0x197dU // Leuze electronic +#define UHS_VID_NUCONN_TECHNOLOGY 0x1989U // Nuconn Technology Corp. +#define UHS_VID_BECEEM_COMMUNICATIONS 0x198fU // Beceem Communications Inc. +#define UHS_VID_ACRON_PRECISION_INDUSTRIAL 0x1990U // Acron Precision Industrial Co., Ltd. +#define UHS_VID_TRILLIUM_TECHNOLOGY_PTY 0x1995U // Trillium Technology Pty. Ltd. +#define UHS_VID_PIXELINK 0x1996U // PixeLINK +#define UHS_VID_MICROSTRAIN 0x199bU // MicroStrain, Inc. +#define UHS_VID_THE_IMAGING_SOURCE_EUROPE 0x199eU // The Imaging Source Europe GmbH +#define UHS_VID_BENICA_CORPORATION 0x199fU // Benica Corporation +#define UHS_VID_BIFORST_TECHNOLOGY 0x19a8U // Biforst Technology Inc. +#define UHS_VID_BODELIN 0x19abU // Bodelin +#define UHS_VID_S_LIFE 0x19afU // S Life +#define UHS_VID_BATRONIX 0x19b2U // Batronix +#define UHS_VID_CELESTRON 0x19b4U // Celestron +#define UHS_VID_B_AND_W_GROUP 0x19b5U // B & W Group +#define UHS_VID_INFOTECH_LOGISTIC 0x19b6U // Infotech Logistic, LLC +#define UHS_VID_DATA_ROBOTICS 0x19b9U // Data Robotics +#define UHS_VID_FUTUBA 0x19c2U // Futuba +#define UHS_VID_MINDTRIBE 0x19caU // Mindtribe +#define UHS_VID_PARROT 0x19cfU // Parrot SA +#define UHS_VID_ZTE_WCDMA_TECHNOLOGIES_MSM 0x19d2U // ZTE WCDMA Technologies MSM +#define UHS_VID_KFI_PRINTERS 0x19dbU // KFI Printers +#define UHS_VID_WEIDUAN_ELECTRONIC_ACCESSORY_SZ 0x19e1U // WeiDuan Electronic Accessory (S.Z.) Co., Ltd. +#define UHS_VID_INDUSTRIAL_TECHNOLOGY_RESEARCH_INSTITUTE 0x19e8U // Industrial Technology Research Institute +#define UHS_VID_PAK_HENG_TECHNOLOGY_SHENZHEN 0x19efU // Pak Heng Technology (Shenzhen) Co., Ltd. +#define UHS_VID_RODE_MICROPHONES 0x19f7U // RODE Microphones +#define UHS_VID_GAMPAQ_COLTD 0x19faU // Gampaq Co.Ltd +#define UHS_VID_DYNEX 0x19ffU // Dynex +#define UHS_VID_BELLWOOD_INTERNATIONAL 0x1a08U // Bellwood International, Inc. +#define UHS_VID_USB_IF_NON_WORKSHOP 0x1a0aU // USB-IF non-workshop +#define UHS_VID_KES 0x1a12U // KES Co., Ltd. +#define UHS_VID_VEHO 0x1a1dU // Veho +#define UHS_VID_AMPHENOL_EAST_ASIA 0x1a25U // Amphenol East Asia Ltd. +#define UHS_VID_SEAGATE_BRANDED_SOLUTIONS 0x1a2aU // Seagate Branded Solutions +#define UHS_VID_CHINA_RESOURCE_SEMICO 0x1a2cU // China Resource Semico Co., Ltd +#define UHS_VID_QUANTA_MICROSYSTEMS 0x1a32U // Quanta Microsystems, Inc. +#define UHS_VID_ACRUX 0x1a34U // ACRUX +#define UHS_VID_BIWIN_TECHNOLOGY 0x1a36U // Biwin Technology Ltd. +#define UHS_VID_TERMINUS_TECHNOLOGY 0x1a40U // Terminus Technology Inc. +#define UHS_VID_ACTION_ELECTRONICS 0x1a41U // Action Electronics Co., Ltd. +#define UHS_VID_VASCO_DATA_SECURITY_INTERNATIONAL 0x1a44U // VASCO Data Security International +#define UHS_VID_SILICON_IMAGE 0x1a4aU // Silicon Image +#define UHS_VID_SAFEBOOT_INTERNATIONAL_BV 0x1a4bU // SafeBoot International B.V. +#define UHS_VID_TANDBERG_DATA 0x1a5aU // Tandberg Data +#define UHS_VID_ABBOTT_DIABETES_CARE 0x1a61U // Abbott Diabetes Care +#define UHS_VID_SPANSION 0x1a6aU // Spansion Inc. +#define UHS_VID_SAMYOUNG_ELECTRONICS 0x1a6dU // SamYoung Electronics Co., Ltd +#define UHS_VID_GLOBAL_UNICHIP 0x1a6eU // Global Unichip Corp. +#define UHS_VID_SAGEM_ORGA 0x1a6fU // Sagem Orga GmbH +#define UHS_VID_PHYSIK_INSTRUMENTE 0x1a72U // Physik Instrumente +#define UHS_VID_BAYER_HEALTH_CARE 0x1a79U // Bayer Health Care LLC +#define UHS_VID_LUMBERG_CONNECT_GMBH_AND_CO_KG 0x1a7bU // Lumberg Connect GmbH & Co. KG +#define UHS_VID_EVOLUENT 0x1a7cU // Evoluent +#define UHS_VID_HOLTEK_SEMICONDUCTOR_1 0x1a81U // Holtek Semiconductor, Inc. +#define UHS_VID_QINHENG_ELECTRONICS 0x1a86U // QinHeng Electronics +#define UHS_VID_DYNALITH_SYSTEMS 0x1a89U // Dynalith Systems Co., Ltd. +#define UHS_VID_SGS_TAIWAN 0x1a8bU // SGS Taiwan Ltd. +#define UHS_VID_BANDRICH 0x1a8dU // BandRich, Inc. +#define UHS_VID_LEICA_CAMERA_AG 0x1a98U // Leica Camera AG +#define UHS_VID_DATA_DRIVE_THRU 0x1aa4U // Data Drive Thru, Inc. +#define UHS_VID_UBEACON_TECHNOLOGIES 0x1aa5U // UBeacon Technologies, Inc. +#define UHS_VID_EFORTUNE_TECHNOLOGY 0x1aa6U // eFortune Technology Corp. +#define UHS_VID_KEETOUCH 0x1aadU // KeeTouch +#define UHS_VID_RIGOL_TECHNOLOGIES 0x1ab1U // Rigol Technologies +#define UHS_VID_SALCOMP_PLC 0x1acbU // Salcomp Plc +#define UHS_VID_MIDIPLUS 0x1accU // Midiplus Co, Ltd. +#define UHS_VID_DESAY_WIRE 0x1ad1U // Desay Wire Co., Ltd. +#define UHS_VID_APS 0x1ad4U // APS +#define UHS_VID_SEL_C662_SERIAL_CABLE 0x1adbU // SEL C662 Serial Cable +#define UHS_VID_IC_DESIGN_REINHARD_GOTTINGER 0x1ae4U // ic-design Reinhard Gottinger GmbH +#define UHS_VID_X_TENSIONS 0x1ae7U // X-TENSIONS +#define UHS_VID_HIGH_TOP_PRECISION_ELECTRONIC 0x1aedU // High Top Precision Electronic Co., Ltd. +#define UHS_VID_CONNTECH_ELECTRONIC_SUZHOU_CORPORATION 0x1aefU // Conntech Electronic (Suzhou) Corporation +#define UHS_VID_CONNECT_ONE 0x1af1U // Connect One Ltd. +#define UHS_VID_A_EBERLE_GMBH_AND_CO_KG 0x1afeU // A. Eberle GmbH & Co. KG +#define UHS_VID_MEILHAUS_ELECTRONIC 0x1b04U // Meilhaus Electronic GmbH +#define UHS_VID_BLUTRONICS_SRL 0x1b0eU // BLUTRONICS S.r.l. +#define UHS_VID_CORSAIR 0x1b1cU // Corsair +#define UHS_VID_MSTAR_SEMICONDUCTOR 0x1b20U // MStar Semiconductor, Inc. +#define UHS_VID_WILINX 0x1b22U // WiLinx Corp. +#define UHS_VID_CELLEX_POWER_PRODUCTS 0x1b26U // Cellex Power Products, Inc. +#define UHS_VID_CURRENT_ELECTRONICS 0x1b27U // Current Electronics Inc. +#define UHS_VID_NAVISIS 0x1b28U // NAVIsis Inc. +#define UHS_VID_UGOBE_LIFE_FORMS 0x1b32U // Ugobe Life Forms, Inc. +#define UHS_VID_VIXS_SYSTEMS 0x1b36U // ViXS Systems, Inc. +#define UHS_VID_IPASSION_TECHNOLOGY 0x1b3bU // iPassion Technology Inc. +#define UHS_VID_GENERALPLUS_TECHNOLOGY 0x1b3fU // Generalplus Technology Inc. +#define UHS_VID_ENERGIZER_HOLDINGS 0x1b47U // Energizer Holdings, Inc. +#define UHS_VID_PLASTRON_PRECISION 0x1b48U // Plastron Precision Co., Ltd. +#define UHS_VID_ARH 0x1b52U // ARH Inc. +#define UHS_VID_KS_TERMINALS 0x1b59U // K.S. Terminals Inc. +#define UHS_VID_CHAO_ZHOU_KAI_YUAN_ELECTRIC 0x1b5aU // Chao Zhou Kai Yuan Electric Co., Ltd. +#define UHS_VID_THE_HONG_KONG_STANDARDS_AND_TESTING_CENTRE 0x1b65U // The Hong Kong Standards and Testing Centre Ltd. +#define UHS_VID_FUSHICAI 0x1b71U // Fushicai +#define UHS_VID_ATERGI_TECHNOLOGY 0x1b72U // ATERGI TECHNOLOGY CO., LTD. +#define UHS_VID_FRESCO_LOGIC 0x1b73U // Fresco Logic +#define UHS_VID_OVISLINK 0x1b75U // Ovislink Corp. +#define UHS_VID_LEGEND_SILICON 0x1b76U // Legend Silicon Corp. +#define UHS_VID_AFATECH 0x1b80U // Afatech +#define UHS_VID_DONGGUAN_GUANSHANG_ELECTRONICS 0x1b86U // Dongguan Guanshang Electronics Co., Ltd. +#define UHS_VID_SHENMING_ELECTRON_DONG_GUAN 0x1b88U // ShenMing Electron (Dong Guan) Co., Ltd. +#define UHS_VID_ALTIUM_LIMITED 0x1b8cU // Altium Limited +#define UHS_VID_E_MOVE_TECHNOLOGY 0x1b8dU // e-MOVE Technology Co., Ltd. +#define UHS_VID_AMLOGIC 0x1b8eU // Amlogic, Inc. +#define UHS_VID_MA_LABS 0x1b8fU // MA LABS, Inc. +#define UHS_VID_N_TRIG 0x1b96U // N-Trig +#define UHS_VID_YMAX_COMMUNICATIONS 0x1b98U // YMax Communications Corp. +#define UHS_VID_SHENZHEN_YUANCHUAN_ELECTRONIC 0x1b99U // Shenzhen Yuanchuan Electronic +#define UHS_VID_JINQ_CHERN_ENTERPRISE 0x1ba1U // JINQ CHERN ENTERPRISE CO., LTD. +#define UHS_VID_LITE_METALS_AND_PLASTIC_SHENZHEN 0x1ba2U // Lite Metals & Plastic (Shenzhen) Co., Ltd. +#define UHS_VID_EMBER_CORPORATION 0x1ba4U // Ember Corporation +#define UHS_VID_ABILIS_SYSTEMS 0x1ba6U // Abilis Systems +#define UHS_VID_CHINA_TELECOMMUNICATION_TECHNOLOGY_LABS 0x1ba8U // China Telecommunication Technology Labs +#define UHS_VID_HARMONIX_MUSIC 0x1badU // Harmonix Music +#define UHS_VID_VUZIX_CORPORATION 0x1baeU // Vuzix Corporation +#define UHS_VID_T_AND_A_MOBILE_PHONES 0x1bbbU // T & A Mobile Phones +#define UHS_VID_FORD_MOTOR 0x1bc4U // Ford Motor Co. +#define UHS_VID_AVIXE_TECHNOLOGY_CHINA 0x1bc5U // AVIXE Technology (China) Ltd. +#define UHS_VID_TELIT_WIRELESS_SOLUTIONS 0x1bc7U // Telit Wireless Solutions +#define UHS_VID_CONTAC_CABLE_INDUSTRIAL_LIMITED 0x1bceU // Contac Cable Industrial Limited +#define UHS_VID_SUNPLUS_INNOVATION_TECHNOLOGY 0x1bcfU // Sunplus Innovation Technology Inc. +#define UHS_VID_HANGZHOU_RIYUE_ELECTRONIC 0x1bd0U // Hangzhou Riyue Electronic Co., Ltd. +#define UHS_VID_BG_SYSTEMS 0x1bd5U // BG Systems, Inc. +#define UHS_VID_P_TWO_INDUSTRIES 0x1bdeU // P-TWO INDUSTRIES, INC. +#define UHS_VID_SHENZHEN_TONGYUAN_NETWORK_COMMUNICATION_CABLES 0x1befU // Shenzhen Tongyuan Network-Communication Cables Co., Ltd +#define UHS_VID_REALVISION 0x1bf0U // RealVision Inc. +#define UHS_VID_EXTRANET_SYSTEMS 0x1bf5U // Extranet Systems Inc. +#define UHS_VID_ORIENT_SEMICONDUCTOR_ELECTRONICS 0x1bf6U // Orient Semiconductor Electronics, Ltd. +#define UHS_VID_TOUCHPACK 0x1bfdU // TouchPack +#define UHS_VID_KRETON_CORPORATION 0x1c02U // Kreton Corporation +#define UHS_VID_QNAP_SYSTEM 0x1c04U // QNAP System Inc. +#define UHS_VID_IONICS_EMS 0x1c0cU // Ionics EMS, Inc. +#define UHS_VID_RELM_WIRELESS 0x1c0dU // Relm Wireless +#define UHS_VID_LANTERRA_INDUSTRIAL 0x1c10U // Lanterra Industrial Co., Ltd. +#define UHS_VID_ALECTRONIC_LIMITED 0x1c13U // ALECTRONIC LIMITED +#define UHS_VID_DATEL_ELECTRONICS 0x1c1aU // Datel Electronics Ltd. +#define UHS_VID_VOLKSWAGEN_OF_AMERICA 0x1c1bU // Volkswagen of America, Inc. +#define UHS_VID_GOLDVISH 0x1c1fU // Goldvish S.A. +#define UHS_VID_FUJI_ELECTRIC_DEVICE_TECHNOLOGY 0x1c20U // Fuji Electric Device Technology Co., Ltd. +#define UHS_VID_ADDMM 0x1c21U // ADDMM LLC +#define UHS_VID_ZHONGSHAN_CHIANG_YU_ELECTRIC 0x1c22U // ZHONGSHAN CHIANG YU ELECTRIC CO., LTD. +#define UHS_VID_SHANGHAI_HAIYING_ELECTRONICS 0x1c26U // Shanghai Haiying Electronics Co., Ltd. +#define UHS_VID_HUIYANG_D_AND_S_CABLE 0x1c27U // HuiYang D & S Cable Co., Ltd. +#define UHS_VID_ELSTER 0x1c29U // Elster GmbH +#define UHS_VID_LS_CABLE 0x1c31U // LS Cable Ltd. +#define UHS_VID_SPRINGCARD 0x1c34U // SpringCard +#define UHS_VID_AUTHORIZER_TECHNOLOGIES 0x1c37U // Authorizer Technologies, Inc. +#define UHS_VID_NONIN_MEDICAL 0x1c3dU // NONIN MEDICAL INC. +#define UHS_VID_WEP_PERIPHERALS 0x1c3eU // Wep Peripherals +#define UHS_VID_EZPROTOTYPES 0x1c40U // EZPrototypes +#define UHS_VID_CHERNG_WEEI_TECHNOLOGY 0x1c49U // Cherng Weei Technology Corp. +#define UHS_VID_SIGMA_MICRO 0x1c4fU // SiGma Micro +#define UHS_VID_PHILIPS_AND_LITE_ON_DIGITAL_SOLUTIONS_CORPORATION 0x1c6bU // Philips & Lite-ON Digital Solutions Corporation +#define UHS_VID_SKYDIGITAL 0x1c6cU // Skydigital Inc. +#define UHS_VID_AMT 0x1c73U // AMT +#define UHS_VID_KAETAT_INDUSTRIAL 0x1c77U // Kaetat Industrial Co., Ltd. +#define UHS_VID_DATASCOPE 0x1c78U // Datascope Corp. +#define UHS_VID_UNIGEN_CORPORATION 0x1c79U // Unigen Corporation +#define UHS_VID_LIGHTUNING_TECHNOLOGY 0x1c7aU // LighTuning Technology Inc. +#define UHS_VID_LUXSHARE_PRECISION_INDUSTRY_SHENZHEN 0x1c7bU // LUXSHARE PRECISION INDUSTRY (SHENZHEN) CO., LTD. +#define UHS_VID_SCHOMAECKER 0x1c83U // Schomaecker GmbH +#define UHS_VID_2N_TELEKOMUNIKACE_AS 0x1c87U // 2N TELEKOMUNIKACE a.s. +#define UHS_VID_SOMAGIC 0x1c88U // Somagic, Inc. +#define UHS_VID_HONGKONG_WEIDIDA_ELECTRON_LIMITED 0x1c89U // HONGKONG WEIDIDA ELECTRON LIMITED +#define UHS_VID_ASTRON_INTERNATIONAL 0x1c8eU // ASTRON INTERNATIONAL CORP. +#define UHS_VID_ALPINE_ELECTRONICS 0x1c98U // ALPINE ELECTRONICS, INC. +#define UHS_VID_OMEGA_TECHNOLOGY 0x1c9eU // OMEGA TECHNOLOGY +#define UHS_VID_ACCARIO 0x1ca0U // ACCARIO Inc. +#define UHS_VID_SYMWAVE 0x1ca1U // Symwave +#define UHS_VID_KINSTONE 0x1cacU // Kinstone +#define UHS_VID_ACES_ELECTRONIC 0x1cb3U // Aces Electronic Co., Ltd. +#define UHS_VID_OPEX_CORPORATION 0x1cb4U // OPEX CORPORATION +#define UHS_VID_IDEACOM_TECHNOLOGY 0x1cb6U // IdeaCom Technology Inc. +#define UHS_VID_LUMINARY_MICRO 0x1cbeU // Luminary Micro Inc. +#define UHS_VID_FORTAT_SKYMARK_INDUSTRIAL_COMPANY 0x1cbfU // FORTAT SKYMARK INDUSTRIAL COMPANY +#define UHS_VID_PLANTSENSE 0x1cc0U // PlantSense +#define UHS_VID_NEXTWAVE_BROADBAND 0x1ccaU // NextWave Broadband Inc. +#define UHS_VID_BODATONG_TECHNOLOGY_SHENZHEN 0x1ccdU // Bodatong Technology (Shenzhen) Co., Ltd. +#define UHS_VID_ADP_CORPORATION 0x1cd4U // adp corporation +#define UHS_VID_FIRECOMMS 0x1cd5U // Firecomms Ltd. +#define UHS_VID_ANTONIO_PRECISE_PRODUCTS_MANUFACTORY 0x1cd6U // Antonio Precise Products Manufactory Ltd. +#define UHS_VID_TELECOMMUNICATIONS_TECHNOLOGY_ASSOCIATION_TTA 0x1cdeU // Telecommunications Technology Association (TTA) +#define UHS_VID_WONTEN_TECHNOLOGY 0x1cdfU // WonTen Technology Co., Ltd. +#define UHS_VID_EDIMAX_TECHNOLOGY 0x1ce0U // EDIMAX TECHNOLOGY CO., LTD. +#define UHS_VID_AMPHENOL_KAE 0x1ce1U // Amphenol KAE +#define UHS_VID_DRESDEN_ELEKTRONIK 0x1cf1U // Dresden Elektronik +#define UHS_VID_ANDES_TECHNOLOGY_CORPORATION 0x1cfcU // ANDES TECHNOLOGY CORPORATION +#define UHS_VID_FLEXTRONICS_DIGITAL_DESIGN_JAPAN 0x1cfdU // Flextronics Digital Design Japan, LTD. +#define UHS_VID_ICON 0x1d03U // iCON +#define UHS_VID_SOLID_MOTION 0x1d07U // Solid-Motion +#define UHS_VID_NINGBO_HENTEK_DRAGON_ELECTRONICS 0x1d08U // NINGBO HENTEK DRAGON ELECTRONICS CO., LTD. +#define UHS_VID_TECHFAITH_WIRELESS_TECHNOLOGY_LIMITED 0x1d09U // TechFaith Wireless Technology Limited +#define UHS_VID_JOHNSON_CONTROLS_INC_THE_AUTOMOTIVE_BUSINESS_UNIT 0x1d0aU // Johnson Controls, Inc. The Automotive Business Unit +#define UHS_VID_HAN_HUA_CABLE_AND_WIRE_TECHNOLOGY_JX 0x1d0bU // HAN HUA CABLE & WIRE TECHNOLOGY (J.X.) CO., LTD. +#define UHS_VID_SONIX_TECHNOLOGY 0x1d0fU // Sonix Technology Co., Ltd. +#define UHS_VID_ALPHA_SAT_TECHNOLOGY_LIMITED 0x1d14U // ALPHA-SAT TECHNOLOGY LIMITED +#define UHS_VID_C_THRU_MUSIC 0x1d17U // C-Thru Music Ltd. +#define UHS_VID_DEXATEK_TECHNOLOGY 0x1d19U // Dexatek Technology Ltd. +#define UHS_VID_DIOSTECH 0x1d1fU // Diostech Co., Ltd. +#define UHS_VID_SAMTACK 0x1d20U // SAMTACK INC. +#define UHS_VID_ASUS 0x1d27U // ASUS +#define UHS_VID_DREAM_CHEEKY 0x1d34U // Dream Cheeky +#define UHS_VID_TOUCH 0x1d45U // Touch +#define UHS_VID_PEGATRON_CORPORATION 0x1d4dU // PEGATRON CORPORATION +#define UHS_VID_OPENMOKO 0x1d50U // OpenMoko, Inc. +#define UHS_VID_XENTA 0x1d57U // Xenta +#define UHS_VID_SMARTRONIX 0x1d5bU // Smartronix, Inc. +#define UHS_VID_LINUX_FOUNDATION 0x1d6bU // Linux Foundation +#define UHS_VID_CITIZEN 0x1d90U // Citizen +#define UHS_VID_ACTIONS_MICROELECTRONICS 0x1de1U // Actions Microelectronics Co. +#define UHS_VID_QUALCOMM_OPTION 0x1e0eU // Qualcomm / Option +#define UHS_VID_POINT_GREY_RESEARCH 0x1e10U // Point Grey Research, Inc. +#define UHS_VID_MIRION_TECHNOLOGIES_DOSIMETRY_SERVICES_DIVISION 0x1e17U // Mirion Technologies Dosimetry Services Division +#define UHS_VID_LUMENSION_SECURITY 0x1e1dU // Lumension Security +#define UHS_VID_INVIA 0x1e1fU // INVIA +#define UHS_VID_FESTO_AG_AND_CO_KG 0x1e29U // Festo AG & Co. KG +#define UHS_VID_CHIPSBANK_MICROELECTRONICS_1 0x1e3dU // Chipsbank Microelectronics Co., Ltd +#define UHS_VID_CLEVERSCOPE 0x1e41U // Cleverscope +#define UHS_VID_CUBETERNET 0x1e4eU // Cubeternet +#define UHS_VID_TYPEMATRIX 0x1e54U // TypeMatrix +#define UHS_VID_TREKSTOR_GMBH_AND_CO_KG 0x1e68U // TrekStor GmbH & Co. KG +#define UHS_VID_NZXT 0x1e71U // NZXT +#define UHS_VID_COBY_ELECTRONICS_CORPORATION 0x1e74U // Coby Electronics Corporation +#define UHS_VID_ROCCAT 0x1e7dU // ROCCAT +#define UHS_VID_NUCORE_TECHNOLOGY 0x1ebbU // NuCORE Technology, Inc. +#define UHS_VID_AIRTIES_WIRELESS_NETWORKS 0x1edaU // AirTies Wireless Networks +#define UHS_VID_BLACKMAGIC_DESIGN 0x1edbU // Blackmagic design +#define UHS_VID_ONDA_COMMUNICATION_SPA 0x1ee8U // ONDA COMMUNICATION S.p.a. +#define UHS_VID_EADS_DEUTSCHLAND 0x1ef6U // EADS Deutschland GmbH +#define UHS_VID_CAL_COMP 0x1f28U // Cal-Comp +#define UHS_VID_ONDA_UNVERIFIED 0x1f3aU // Onda (unverified) +#define UHS_VID_THE_NEAT_COMPANY 0x1f44U // The Neat Company +#define UHS_VID_H_TRONIC 0x1f48U // H-TRONIC GmbH +#define UHS_VID_G_TEK_ELECTRONICS_GROUP 0x1f4dU // G-Tek Electronics Group +#define UHS_VID_ALIPH 0x1f6fU // Aliph +#define UHS_VID_INNOSTOR_TECHNOLOGY_CORPORATION 0x1f75U // Innostor Technology Corporation +#define UHS_VID_TANDBERG 0x1f82U // TANDBERG +#define UHS_VID_ALERE 0x1f84U // Alere, Inc. +#define UHS_VID_STANTUM 0x1f87U // Stantum +#define UHS_VID_UBIQUITI_NETWORKS 0x1f9bU // Ubiquiti Networks, Inc. +#define UHS_VID_SAMSUNG_OPTO_ELECTRONCS 0x1fabU // Samsung Opto-Electroncs Co., Ltd. +#define UHS_VID_DELPHIN_TECHNOLOGY_AG 0x1fbdU // Delphin Technology AG +#define UHS_VID_NXP_SEMICONDUCTORS 0x1fc9U // NXP Semiconductors +#define UHS_VID_ILX_LIGHTWAVE_CORPORATION 0x1fdeU // ILX Lightwave Corporation +#define UHS_VID_VERTEX_WIRELESS 0x1fe7U // Vertex Wireless Co., Ltd. +#define UHS_VID_CVT_ELECTRONICSCOLTD 0x1ff7U // CVT Electronics.Co.,Ltd +#define UHS_VID_IDEOFY 0x1fffU // Ideofy Inc. +#define UHS_VID_D_LINK 0x2001U // D-Link Corp. +#define UHS_VID_DAP_TECHNOLOGIES 0x2002U // DAP Technologies +#define UHS_VID_DETECTOMAT 0x2003U // detectomat +#define UHS_VID_RELOOP 0x200cU // Reloop +#define UHS_VID_PCTV_SYSTEMS 0x2013U // PCTV Systems +#define UHS_VID_PLANEX_1 0x2019U // PLANEX +#define UHS_VID_ENCORE_ELECTRONICS 0x203dU // Encore Electronics Inc. +#define UHS_VID_HAUPPAUGE 0x2040U // Hauppauge +#define UHS_VID_TEXAS_INSTRUMENTS_2 0x2047U // Texas Instruments +#define UHS_VID_NANO_RIVER_TECHNOLOGY 0x2058U // Nano River Technology +#define UHS_VID_TAICANG_TANDW_ELECTRONICS 0x2077U // Taicang T&W Electronics Co. Ltd +#define UHS_VID_BARNES_AND_NOBLE 0x2080U // Barnes & Noble +#define UHS_VID_SIMPASS 0x2086U // SIMPASS +#define UHS_VID_CANDO 0x2087U // Cando +#define UHS_VID_CLAY_LOGIC 0x20a0U // Clay Logic +#define UHS_VID_XMOS 0x20b1U // XMOS Ltd +#define UHS_VID_HANVON 0x20b3U // Hanvon +#define UHS_VID_QI_HARDWARE 0x20b7U // Qi Hardware +#define UHS_VID_MINICIRCUITS 0x20ceU // Minicircuits +#define UHS_VID_SIMTEC_ELECTRONICS 0x20dfU // Simtec Electronics +#define UHS_VID_NET_NEW_ELECTRONIC_TECHNOLOGY 0x20f1U // NET New Electronic Technology GmbH +#define UHS_VID_TRENDNET_1 0x20f4U // TRENDnet +#define UHS_VID_XIMEA 0x20f7U // XIMEA +#define UHS_VID_RT_SYSTEMS 0x2100U // RT Systems +#define UHS_VID_ACTIONSTAR 0x2101U // ActionStar +#define UHS_VID_VIA_LABS 0x2109U // VIA Labs, Inc. +#define UHS_VID_SOFTKINETIC 0x2113U // Softkinetic +#define UHS_VID_ADVANCED_SILICON 0x2149U // Advanced Silicon S.A. +#define UHS_VID_CREATIVE_UNKNOWN 0x2162U // Creative (?) +#define UHS_VID_GW_INSTEK 0x2184U // GW Instek +#define UHS_VID_EMOTIV_SYSTEMS_PTY 0x21a1U // Emotiv Systems Pty. Ltd. +#define UHS_VID_AGECODAGIS_SARL 0x21d6U // Agecodagis SARL +#define UHS_VID_MACALLY_1 0x2222U // MacAlly +#define UHS_VID_SAMWOO_ENTERPRISE 0x2227U // SAMWOO Enterprise +#define UHS_VID_SILICON_MOTION_1 0x2232U // Silicon Motion +#define UHS_VID_RADIOSHACK_CORPORATION 0x2233U // RadioShack Corporation +#define UHS_VID_KOBO 0x2237U // Kobo Inc. +#define UHS_VID_MORPHO 0x225dU // Morpho +#define UHS_VID_8D_TECHNOLOGIES 0x228dU // 8D Technologies inc. +#define UHS_VID_PIE_DIGITAL 0x22a6U // Pie Digital, Inc. +#define UHS_VID_MOTOROLA_PCS 0x22b8U // Motorola PCS +#define UHS_VID_ETURBOTOUCH_TECHNOLOGY 0x22b9U // eTurboTouch Technology, Inc. +#define UHS_VID_TECHNOLOGY_INNOVATION_HOLDINGS 0x22baU // Technology Innovation Holdings, Ltd +#define UHS_VID_PINNACLE_SYSTEMS_1 0x2304U // Pinnacle Systems, Inc. +#define UHS_VID_SHINING_TECHNOLOGIES_INC_HEX_ 0x2318U // Shining Technologies, Inc. [hex] +#define UHS_VID_ARDUINO 0x2341U // Arduino SA +#define UHS_VID_PUMATRONIX_LTDA 0x2373U // Pumatronix Ltda +#define UHS_VID_DIGITALWAY_1 0x2375U // Digit@lway, Inc. +#define UHS_VID_SANHO_DIGITAL_ELECTRONICS 0x2406U // SANHO Digital Electronics Co., Ltd. +#define UHS_VID_AESSENT_TECHNOLOGY 0x2443U // Aessent Technology Ltd +#define UHS_VID_TRIPP_LITE_1 0x2478U // Tripp-Lite +#define UHS_VID_MAXXTER 0x248aU // Maxxter +#define UHS_VID_M2TECH_SRL 0x249cU // M2Tech s.r.l. +#define UHS_VID_PARATRONIC 0x24e1U // Paratronic +#define UHS_VID_TWINMOS_1 0x2632U // TwinMOS +#define UHS_VID_XSENS 0x2639U // Xsens +#define UHS_VID_ELECTRONICS_FOR_IMAGING_INC_HEX_ 0x2650U // Electronics For Imaging, Inc. [hex] +#define UHS_VID_SUNDTEK 0x2659U // Sundtek +#define UHS_VID_BASLER_AG 0x2676U // Basler AG +#define UHS_VID_CITIZEN_1 0x2730U // Citizen +#define UHS_VID_DIGITALWAY_2 0x2735U // DigitalWay +#define UHS_VID_NHJ 0x2770U // NHJ, Ltd +#define UHS_VID_THINGM 0x27b8U // ThingM +#define UHS_VID_ASUSTEK_COMPUTER_1 0x2821U // ASUSTek Computer Inc. +#define UHS_VID_TOPTRONIC_INDUSTRIAL 0x2899U // Toptronic Industrial Co., Ltd +#define UHS_VID_DRACALRAPHNET_TECHNOLOGIES 0x289bU // Dracal/Raphnet technologies +#define UHS_VID_JOLLA_OY 0x2931U // Jolla Oy +#define UHS_VID_DOG_HUNTER_AG 0x2a03U // dog hunter AG +#define UHS_VID_RTD_EMBEDDED_TECHNOLOGIES 0x2a37U // RTD Embedded Technologies, Inc. +#define UHS_VID_MEIZU 0x2a45U // Meizu Corp. +#define UHS_VID_PLANEX_COMMUNICATIONS_2 0x2c02U // Planex Communications +#define UHS_VID_DOLPHIN_PERIPHERALS 0x2c1aU // Dolphin Peripherals +#define UHS_VID_FUJITSU_1 0x2fb2U // Fujitsu, Ltd +#define UHS_VID_EAGLETRON_1 0x3125U // Eagletron +#define UHS_VID_NAVINI_NETWORKS 0x3136U // Navini Networks +#define UHS_VID_WHANAM_ELECTRONICS 0x3176U // Whanam Electronics Co., Ltd +#define UHS_VID_LINK_INSTRUMENTS 0x3195U // Link Instruments +#define UHS_VID_VIDZMEDIA_PTE 0x3275U // VidzMedia Pte Ltd +#define UHS_VID_INLINE 0x3333U // InLine +#define UHS_VID_AEI 0x3334U // AEI +#define UHS_VID_YAKUMO 0x3340U // Yakumo +#define UHS_VID_LEAGUER_MICROELECTRONICS_LME 0x3344U // Leaguer Microelectronics (LME) +#define UHS_VID_MICRO_STAR 0x3504U // Micro Star +#define UHS_VID_POWER_QUOTIENT_INTERNATIONAL_1 0x3538U // Power Quotient International Co., Ltd +#define UHS_VID_DIVA 0x3579U // DIVA +#define UHS_VID_SHARKOON 0x357dU // Sharkoon +#define UHS_VID_INVIBRO 0x3636U // InVibro +#define UHS_VID_WEM 0x3838U // WEM +#define UHS_VID_NATIONAL_INSTRUMENTS 0x3923U // National Instruments Corp. +#define UHS_VID_I_O_DATA 0x40bbU // I-O Data +#define UHS_VID_I_ROCKS 0x4101U // i-rocks +#define UHS_VID_IRIVER_1 0x4102U // iRiver, Ltd. +#define UHS_VID_DELL_COMPUTER_1 0x413cU // Dell Computer Corp. +#define UHS_VID_USBEST_TECHNOLOGY 0x4146U // USBest Technology +#define UHS_VID_TARGUS 0x4168U // Targus +#define UHS_VID_USB_DESIGN_BY_EXAMPLE 0x4242U // USB Design by Example +#define UHS_VID_GOPRO 0x4255U // GoPro +#define UHS_VID_BROADCOM_1 0x4317U // Broadcom Corp. +#define UHS_VID_WINCHIPHEAD 0x4348U // WinChipHead +#define UHS_VID_SHUTTLE_2 0x4572U // Shuttle, Inc. +#define UHS_VID_PANRAM 0x4586U // Panram +#define UHS_VID_EMS_PRODUCTION 0x4670U // EMS Production +#define UHS_VID_MIDITECH 0x4752U // Miditech +#define UHS_VID_GW_INSTEK_1 0x4757U // GW Instek +#define UHS_VID_ACEECA 0x4766U // Aceeca +#define UHS_VID_MEMOREX 0x4855U // Memorex +#define UHS_VID_SIMPLETECH 0x4971U // SimpleTech +#define UHS_VID_MUSICAL_FIDELITY 0x4d46U // Musical Fidelity +#define UHS_VID_GRANDTEC 0x5032U // Grandtec +#define UHS_VID_LINKSYS_UNKNOWN 0x5041U // Linksys (?) +#define UHS_VID_AVERATEC_UNKNOWN 0x50c2U // Averatec (?) +#define UHS_VID_SWEEX_1 0x5173U // Sweex +#define UHS_VID_I_TETRA 0x5219U // I-Tetra +#define UHS_VID_OWON 0x5345U // Owon +#define UHS_VID_SATOSHILABS 0x534cU // SatoshiLabs +#define UHS_VID_MEYER_INSTRUMENTS_MIS_1 0x5354U // Meyer Instruments (MIS) +#define UHS_VID_TRANSMETA 0x544dU // Transmeta Corp. +#define UHS_VID_UC_LOGIC_TECHNOLOGY 0x5543U // UC-Logic Technology Corp. +#define UHS_VID_EPIPHAN_SYSTEMS 0x5555U // Epiphan Systems Inc. +#define UHS_VID_ONSPEC_ELECTRONIC 0x55aaU // OnSpec Electronic, Inc. +#define UHS_VID_GOTVIEW 0x5654U // Gotview +#define UHS_VID_UNI_TREND_GROUP_LIMITED 0x5656U // Uni-Trend Group Limited +#define UHS_VID_IRTOUCHSYSTEMS 0x595aU // IRTOUCHSYSTEMS Co. Ltd. +#define UHS_VID_ACER_2 0x5986U // Acer, Inc +#define UHS_VID_NONOLITH_LABS 0x59e3U // Nonolith Labs +#define UHS_VID_ZINWELL 0x5a57U // Zinwell +#define UHS_VID_BEHOLDER_INTERNATIONAL 0x6000U // Beholder International Ltd. +#define UHS_VID_INGENIC_SEMICONDUCTOR 0x601aU // Ingenic Semiconductor Ltd. +#define UHS_VID_SITECOM 0x6189U // Sitecom +#define UHS_VID_LIGHTINGSOFT_AG 0x6244U // LightingSoft AG +#define UHS_VID_TWINHAN_TECHNOLOGY 0x6253U // TwinHan Technology Co., Ltd +#define UHS_VID_CORELOGIC 0x636cU // CoreLogic, Inc. +#define UHS_VID_UNKNOWN_SONY_UNKNOWN 0x6472U // Unknown (Sony?) +#define UHS_VID_ARKMICRO_TECHNOLOGIES_1 0x6547U // Arkmicro Technologies Inc. +#define UHS_VID_IRTOUCHSYSTEMS_1 0x6615U // IRTOUCHSYSTEMS Co. Ltd. +#define UHS_VID_PROTOTYPE_PRODUCT_VENDOR_ID 0x6666U // Prototype product Vendor ID +#define UHS_VID_WISEGROUP 0x6677U // WiseGroup, Ltd. +#define UHS_VID_3COM_1 0x6891U // 3Com +#define UHS_VID_OPERA1 0x695cU // Opera1 +#define UHS_VID_YEALINK_NETWORK_TECHNOLOGY 0x6993U // Yealink Network Technology Co., Ltd. +#define UHS_VID_SHANGHAI_JUJO_ELECTRONICS 0x6a75U // Shanghai Jujo Electronics Co., Ltd +#define UHS_VID_CME_CENTRAL_MUSIC 0x7104U // CME (Central Music Co.) +#define UHS_VID_STACKFOUNDRY 0x726cU // StackFoundry LLC +#define UHS_VID_TBS_TECHNOLOGIES_CHINA 0x734cU // TBS Technologies China +#define UHS_VID_BEIJING_STONE_TECHNOLOGY 0x7373U // Beijing STONE Technology Co. Ltd. +#define UHS_VID_EDIMAX_TECHNOLOGY_1 0x7392U // Edimax Technology Co., Ltd +#define UHS_VID_INTEL_1 0x8086U // Intel Corp. +#define UHS_VID_INTEL_2 0x8087U // Intel Corp. +#define UHS_VID_VIRTUALBOX 0x80eeU // VirtualBox +#define UHS_VID_KEIO 0x8282U // Keio +#define UHS_VID_EGO_SYSTEMS_1 0x8341U // EGO Systems, Inc. +#define UHS_VID_TRANSCEND_INFORMATION_1 0x8564U // Transcend Information, Inc. +#define UHS_VID_INTENSO_GMBG 0x8644U // Intenso GmbG +#define UHS_VID_CH_PRODUCTS_1 0x8e06U // CH Products, Inc. +#define UHS_VID_SITECOM_1 0x9016U // Sitecom +#define UHS_VID_TEVII_TECHNOLOGY 0x9022U // TeVii Technology Ltd. +#define UHS_VID_GEOLAB 0x9148U // GeoLab, Ltd +#define UHS_VID_MOSCHIP_SEMICONDUCTOR 0x9710U // MosChip Semiconductor +#define UHS_VID_BESTMEDIA_CD_RECORDABLE_GMBH_AND_CO_KG 0x9849U // Bestmedia CD Recordable GmbH & Co. KG +#define UHS_VID_ODEON 0x9999U // Odeon +#define UHS_VID_GRANDTEC_1 0x99faU // Grandtec +#define UHS_VID_J_WESTHUES 0x9ac4U // J. Westhues +#define UHS_VID_MARVELL_SEMICONDUCTOR_1 0x9e88U // Marvell Semiconductor, Inc. +#define UHS_VID_ANMO_ELECTRONICS_CORP_DINO_LITE_UNKNOWN 0xa128U // AnMo Electronics Corp. / Dino-Lite (?) +#define UHS_VID_ANMO_ELECTRONICS_CORPORATION 0xa168U // AnMo Electronics Corporation +#define UHS_VID_ASIX 0xa600U // Asix +#define UHS_VID_3COM_2 0xa727U // 3Com +#define UHS_VID_MXT 0xaaaaU // MXT +#define UHS_VID_UNKNOWN_3 0xabcdU // Unknown +#define UHS_VID_BLUE_MICROPHONES 0xb58eU // Blue Microphones +#define UHS_VID_CARD_DEVICE_EXPERT 0xc216U // Card Device Expert Co., LTD +#define UHS_VID_KEIL_SOFTWARE_1 0xc251U // Keil Software, Inc. +#define UHS_VID_CACE_TECHNOLOGIES 0xcaceU // CACE Technologies Inc. +#define UHS_VID_SMART_TECHNOLOGY_INDUSTRIAL 0xcd12U // SMART TECHNOLOGY INDUSTRIAL LTD. +#define UHS_VID_ULTIMARC 0xd208U // Ultimarc +#define UHS_VID_ULTIMARC_1 0xd209U // Ultimarc +#define UHS_VID_LOGILINK 0xd904U // LogiLink +#define UHS_VID_XORCOM 0xe4e4U // Xorcom Ltd. +#define UHS_VID_MAKINGTHINGS 0xeb03U // MakingThings +#define UHS_VID_EMPIA_TECHNOLOGY 0xeb1aU // eMPIA Technology, Inc. +#define UHS_VID_KWORLD 0xeb2aU // KWorld +#define UHS_VID_SMART_TECHNOLOGY_INDUSTRIAL_1 0xef18U // SMART TECHNOLOGY INDUSTRIAL LTD. +#define UHS_VID_HEWLETT_PACKARD_1 0xf003U // Hewlett Packard +#define UHS_VID_LEAP_MOTION 0xf182U // Leap Motion +#define UHS_VID_ATTEN_ELECTRONICS_SIGLENT_TECHNOLOGIES 0xf4ecU // Atten Electronics / Siglent Technologies +#define UHS_VID_SHENZHEN_SIGLENT 0xf4edU // Shenzhen Siglent Co., Ltd. +#define UHS_VID_HAMA_1 0xf766U // Hama +#define UHS_VID_CONRAD_ELECTRONIC_SE 0xfc08U // Conrad Electronic SE +#define UHS_VID_FNK_TECH 0xffeeU // FNK Tech + +#endif + + diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_UsbCore.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_UsbCore.h new file mode 100644 index 000000000000..cad84fba1128 --- /dev/null +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_UsbCore.h @@ -0,0 +1,336 @@ +/* Copyright (C) 2015-2016 Andrew J. Kroll + and +Copyright (C) 2011 Circuits At Home, LTD. All rights reserved. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +Contact information +------------------- + +Circuits At Home, LTD +Web : http://www.circuitsathome.com +e-mail : support@circuitsathome.com + */ + +#if !defined(_UHS_host_h_) || defined(USBCORE_H) +#error "Never include UHS_UsbCore.h directly; include UHS_Host.h instead" +#else +#define USBCORE_H + +#ifndef UHS_HOST_MAX_INTERFACE_DRIVERS +#define UHS_HOST_MAX_INTERFACE_DRIVERS 0x10U // Default maximum number of USB interface drivers +#endif + +#if !defined(SYSTEM_OR_SPECIAL_YIELD) +#define SYSTEM_OR_SPECIAL_YIELD(...) VOID0 +#endif + +#if !defined(SYSTEM_OR_SPECIAL_YIELD_FROM_ISR) +#define SYSTEM_OR_SPECIAL_YIELD_FROM_ISR(...) SYSTEM_OR_SPECIAL_YIELD +#endif + +// As we make extensions to a target interface add to UHS_HOST_MAX_INTERFACE_DRIVERS +// This offset gets calculated for supporting wide subclasses, such as HID, BT, etc. +#define UHS_HID_INDEX (UHS_HOST_MAX_INTERFACE_DRIVERS + 1) + +/* Common setup data constant combinations */ +//get descriptor request type +#define UHS_bmREQ_GET_DESCR (USB_SETUP_DEVICE_TO_HOST|USB_SETUP_TYPE_STANDARD|USB_SETUP_RECIPIENT_DEVICE) + +//set request type for all but 'set feature' and 'set interface' +#define UHS_bmREQ_SET (USB_SETUP_HOST_TO_DEVICE|USB_SETUP_TYPE_STANDARD|USB_SETUP_RECIPIENT_DEVICE) + +//get interface request type +#define UHS_bmREQ_CL_GET_INTF (USB_SETUP_DEVICE_TO_HOST|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_INTERFACE) + +// D7 data transfer direction (0 - host-to-device, 1 - device-to-host) +// D6-5 Type (0- standard, 1 - class, 2 - vendor, 3 - reserved) +// D4-0 Recipient (0 - device, 1 - interface, 2 - endpoint, 3 - other, 4..31 - reserved) + + +// TO-DO: Use the python script to generate these. +// TO-DO: Add _all_ subclasses here. +// USB Device Classes, Subclasses and Protocols +//////////////////////////////////////////////////////////////////////////////// +// Use Class Info in the Interface Descriptors +#define UHS_USB_CLASS_USE_CLASS_INFO 0x00U + +//////////////////////////////////////////////////////////////////////////////// +// Audio +#define UHS_USB_CLASS_AUDIO 0x01U +// Subclasses +#define UHS_USB_SUBCLASS_AUDIOCONTROL 0x01U +#define UHS_USB_SUBCLASS_AUDIOSTREAMING 0x02U +#define UHS_USB_SUBCLASS_MIDISTREAMING 0x03U + +//////////////////////////////////////////////////////////////////////////////// +// Communications and CDC Control +#define UHS_USB_CLASS_COM_AND_CDC_CTRL 0x02U + +//////////////////////////////////////////////////////////////////////////////// +// HID +#define UHS_USB_CLASS_HID 0x03U +// Subclasses +#define UHS_HID_BOOT_SUBCLASS 0x01U +// Protocols +#define UHS_HID_PROTOCOL_HIDBOOT_KEYBOARD 0x01U +#define UHS_HID_PROTOCOL_HIDBOOT_MOUSE 0x02U +//////////////////////////////////////////////////////////////////////////////// +// Physical +#define UHS_USB_CLASS_PHYSICAL 0x05U + +//////////////////////////////////////////////////////////////////////////////// +// Image +#define UHS_USB_CLASS_IMAGE 0x06U + +//////////////////////////////////////////////////////////////////////////////// +// Printer +#define UHS_USB_CLASS_PRINTER 0x07U + +//////////////////////////////////////////////////////////////////////////////// +// Mass Storage +#define UHS_USB_CLASS_MASS_STORAGE 0x08 +// Subclasses +#define UHS_BULK_SUBCLASS_SCSI_NOT_REPORTED 0x00U // De facto use +#define UHS_BULK_SUBCLASS_RBC 0x01U +#define UHS_BULK_SUBCLASS_ATAPI 0x02U // MMC-5 (ATAPI) +#define UHS_BULK_SUBCLASS_OBSOLETE1 0x03U // Was QIC-157 +#define UHS_BULK_SUBCLASS_UFI 0x04U // Specifies how to interface Floppy Disk Drives to USB +#define UHS_BULK_SUBCLASS_OBSOLETE2 0x05U // Was SFF-8070i +#define UHS_BULK_SUBCLASS_SCSI 0x06U // SCSI Transparent Command Set +#define UHS_BULK_SUBCLASS_LSDFS 0x07U // Specifies how host has to negotiate access before trying SCSI +#define UHS_BULK_SUBCLASS_IEEE1667 0x08U +// Protocols +#define UHS_STOR_PROTO_CBI 0x00U // CBI (with command completion interrupt) +#define UHS_STOR_PROTO_CBI_NO_INT 0x01U // CBI (without command completion interrupt) +#define UHS_STOR_PROTO_OBSOLETE 0x02U +#define UHS_STOR_PROTO_BBB 0x50U // Bulk Only Transport +#define UHS_STOR_PROTO_UAS 0x62U + +//////////////////////////////////////////////////////////////////////////////// +// Hub +#define UHS_USB_CLASS_HUB 0x09U + +//////////////////////////////////////////////////////////////////////////////// +// CDC-Data +#define UHS_USB_CLASS_CDC_DATA 0x0AU + +//////////////////////////////////////////////////////////////////////////////// +// Smart-Card +#define UHS_USB_CLASS_SMART_CARD 0x0BU + +//////////////////////////////////////////////////////////////////////////////// +// Content Security +#define UHS_USB_CLASS_CONTENT_SECURITY 0x0DU + +//////////////////////////////////////////////////////////////////////////////// +// Video +#define UHS_USB_CLASS_VIDEO 0x0EU + +//////////////////////////////////////////////////////////////////////////////// +// Personal Healthcare +#define UHS_USB_CLASS_PERSONAL_HEALTH 0x0FU + +//////////////////////////////////////////////////////////////////////////////// +// Diagnostic Device +#define UHS_USB_CLASS_DIAGNOSTIC_DEVICE 0xDCU + +//////////////////////////////////////////////////////////////////////////////// +// Wireless Controller +#define UHS_USB_CLASS_WIRELESS_CTRL 0xE0U + +//////////////////////////////////////////////////////////////////////////////// +// Miscellaneous +#define UHS_USB_CLASS_MISC 0xEFU + +//////////////////////////////////////////////////////////////////////////////// +// Application Specific +#define UHS_USB_CLASS_APP_SPECIFIC 0xFEU + +//////////////////////////////////////////////////////////////////////////////// +// Vendor Specific +#define UHS_USB_CLASS_VENDOR_SPECIFIC 0xFFU + +//////////////////////////////////////////////////////////////////////////////// + + +/* USB state machine states */ +#define UHS_USB_HOST_STATE_MASK 0xF0U + +// Configure states, MSN == 0 --------------------------V +#define UHS_USB_HOST_STATE_DETACHED 0x00U +#define UHS_USB_HOST_STATE_DEBOUNCE 0x01U +#define UHS_USB_HOST_STATE_DEBOUNCE_NOT_COMPLETE 0x02U +#define UHS_USB_HOST_STATE_RESET_NOT_COMPLETE 0x03U +#define UHS_USB_HOST_STATE_WAIT_SOF 0x04U +#define UHS_USB_HOST_STATE_WAIT_BUS_READY 0x05U +#define UHS_USB_HOST_STATE_RESET_DEVICE 0x0AU +#define UHS_USB_HOST_STATE_CONFIGURING 0x0CU // Looks like "CO"nfig (backwards) +#define UHS_USB_HOST_STATE_CONFIGURING_DONE 0x0DU // Looks like "DO"one (backwards) +#define UHS_USB_HOST_STATE_CHECK 0x0EU +#define UHS_USB_HOST_STATE_ILLEGAL 0x0FU // Foo + +// Run states, MSN != 0 --------------------------------V +#define UHS_USB_HOST_STATE_RUNNING 0x60U // Looks like "GO" +#define UHS_USB_HOST_STATE_IDLE 0x1DU // Looks like "ID"le +#define UHS_USB_HOST_STATE_ERROR 0xF0U // Looks like "FO"o +#define UHS_USB_HOST_STATE_INITIALIZE 0x10U // Looks like "I"nit + +// Host SE result codes. +// Common SE results are stored in the low nybble, all interface drivers understand these plus 0x1f. +// Extended SE results are 0x10-0x1e. SE code only understands these internal to the hardware. +// Values > 0x1F are driver or other internal error conditions. +// Return these result codes from your host controller driver to match the error condition +// ALL Non-zero values are errors. +// Values not listed in this table are not handled in the base class, or any host driver. + +#define UHS_HOST_ERROR_NONE 0x00U // No error +#define UHS_HOST_ERROR_BUSY 0x01U // transfer pending +#define UHS_HOST_ERROR_BADREQ 0x02U // Transfer Launch Request was bad +#define UHS_HOST_ERROR_DMA 0x03U // DMA was too short, or too long +#define UHS_HOST_ERROR_NAK 0x04U // Peripheral returned NAK +#define UHS_HOST_ERROR_STALL 0x05U // Peripheral returned STALL +#define UHS_HOST_ERROR_TOGERR 0x06U // Toggle error/ISO over-underrun +#define UHS_HOST_ERROR_WRONGPID 0x07U // Received wrong Packet ID +#define UHS_HOST_ERROR_BADBC 0x08U // Byte count is bad +#define UHS_HOST_ERROR_PIDERR 0x09U // Received Packet ID is corrupted +#define UHS_HOST_ERROR_BADRQ 0x0AU // Packet error. Increase max packet. +#define UHS_HOST_ERROR_CRC 0x0BU // USB CRC was incorrect +#define UHS_HOST_ERROR_KERR 0x0CU // K-state instead of response, usually indicates wrong speed +#define UHS_HOST_ERROR_JERR 0x0DU // J-state instead of response, usually indicates wrong speed +#define UHS_HOST_ERROR_TIMEOUT 0x0EU // Device did not respond in time +#define UHS_HOST_ERROR_BABBLE 0x0FU // Line noise/unexpected data +#define UHS_HOST_ERROR_MEM_LAT 0x10U // Error caused by memory latency. +#define UHS_HOST_ERROR_NYET 0x11U // OUT transfer accepted with NYET + +// Addressing error codes +#define ADDR_ERROR_INVALID_INDEX 0xA0U +#define ADDR_ERROR_INVALID_ADDRESS 0xA1U + +// Common Interface Driver error codes +#define UHS_HOST_ERROR_DEVICE_NOT_SUPPORTED 0xD1U // Driver doesn't support the device or interfaces +#define UHS_HOST_ERROR_DEVICE_INIT_INCOMPLETE 0xD2U // Init partially finished, but died. +#define UHS_HOST_ERROR_CANT_REGISTER_DEVICE_CLASS 0xD3U // There was no driver for the interface requested. +#define UHS_HOST_ERROR_ADDRESS_POOL_FULL 0xD4U // No addresses left in the address pool. +#define UHS_HOST_ERROR_HUB_ADDRESS_OVERFLOW 0xD5U // No hub addresses left. The maximum is 7. +#define UHS_HOST_ERROR_NO_ADDRESS_IN_POOL 0xD6U // Address was not allocated in the pool, thus not found. +#define UHS_HOST_ERROR_NULL_EPINFO 0xD7U // The supplied endpoint was NULL, indicates a bug or other problem. +#define UHS_HOST_ERROR_BAD_ARGUMENT 0xD8U // Indicates a range violation bug. +#define UHS_HOST_ERROR_DEVICE_DRIVER_BUSY 0xD9U // The interface driver is busy or out buffer is full, try again later. +#define UHS_HOST_ERROR_BAD_MAX_PACKET_SIZE 0xDAU // The maximum packet size was exceeded. Try again with smaller size. +#define UHS_HOST_ERROR_NO_ENDPOINT_IN_TABLE 0xDBU // The endpoint could not be found in the endpoint table. +#define UHS_HOST_ERROR_UNPLUGGED 0xDEU // Someone removed the USB device, or Vbus was turned off. +#define UHS_HOST_ERROR_NOMEM 0xDFU // Out Of Memory. + +// Control request stream errors +#define UHS_HOST_ERROR_FailGetDevDescr 0xE1U +#define UHS_HOST_ERROR_FailSetDevTblEntry 0xE2U +#define UHS_HOST_ERROR_FailGetConfDescr 0xE3U +#define UHS_HOST_ERROR_END_OF_STREAM 0xEFU + +// Host base class specific Error codes +#define UHS_HOST_ERROR_NOT_IMPLEMENTED 0xFEU +#define UHS_HOST_ERROR_TRANSFER_TIMEOUT 0xFFU + +// SEI interaction defaults +#define UHS_HOST_TRANSFER_MAX_MS 10000 // USB transfer timeout in ms, per section 9.2.6.1 of USB 2.0 spec +#define UHS_HOST_TRANSFER_RETRY_MAXIMUM 3 // 3 retry limit for a transfer +#define UHS_HOST_DEBOUNCE_DELAY_MS 500 // settle delay in milliseconds +#define UHS_HUB_RESET_DELAY_MS 20 // hub port reset delay, 10ms recomended, but can be up to 20ms + +// +// We only provide the minimum needed information for enumeration. +// Interface drivers should be able to set up what is needed with nothing more. +// A driver needs to know the following information: +// 1: address on the USB network, parent and port (aka UsbDeviceAddress) +// 2: endpoints +// 3: vid:pid, class, subclass, protocol +// + +struct ENDPOINT_INFO { + uint8_t bEndpointAddress; // Endpoint address. Bit 7 indicates direction (0=OUT, 1=IN). + uint8_t bmAttributes; // Endpoint transfer type. + uint16_t wMaxPacketSize; // Maximum packet size. + uint8_t bInterval; // Polling interval in frames. +} __attribute__((packed)); + +struct INTERFACE_INFO { + uint8_t bInterfaceNumber; + uint8_t bAlternateSetting; + uint8_t numep; + uint8_t klass; + uint8_t subklass; + uint8_t protocol; + ENDPOINT_INFO epInfo[16]; +} __attribute__((packed)); + +struct ENUMERATION_INFO { + uint16_t vid; + uint16_t pid; + uint16_t bcdDevice; + uint8_t klass; + uint8_t subklass; + uint8_t protocol; + uint8_t bMaxPacketSize0; + uint8_t currentconfig; + uint8_t parent; + uint8_t port; + uint8_t address; + INTERFACE_INFO interface; +} __attribute__((packed)); + +/* USB Setup Packet Structure */ +typedef struct { + // offset description + // 0 Bit-map of request type + union { + uint8_t bmRequestType; + + struct { + uint8_t recipient : 5; // Recipient of the request + uint8_t type : 2; // Type of request + uint8_t direction : 1; // Direction of data transfer + } __attribute__((packed)); + } ReqType_u; + + // 1 Request + uint8_t bRequest; + + // 2 Depends on bRequest + union { + uint16_t wValue; + + struct { + uint8_t wValueLo; + uint8_t wValueHi; + } __attribute__((packed)); + } wVal_u; + // 4 Depends on bRequest + uint16_t wIndex; + // 6 Depends on bRequest + uint16_t wLength; + // 8 bytes total +} __attribute__((packed)) SETUP_PKT, *PSETUP_PKT; + + +// little endian :-) 8 8 8 8 16 16 +#define mkSETUP_PKT8(bmReqType, bRequest, wValLo, wValHi, wInd, total) ((uint64_t)(((uint64_t)(bmReqType)))|(((uint64_t)(bRequest))<<8)|(((uint64_t)(wValLo))<<16)|(((uint64_t)(wValHi))<<24)|(((uint64_t)(wInd))<<32)|(((uint64_t)(total)<<48))) +#define mkSETUP_PKT16(bmReqType, bRequest, wVal, wInd, total) ((uint64_t)(((uint64_t)(bmReqType)))|(((uint64_t)(bRequest))<<8)|(((uint64_t)(wVal ))<<16) |(((uint64_t)(wInd))<<32)|(((uint64_t)(total)<<48))) + +// Big endian -- but we aren't able to use this :-/ +//#define mkSETUP_PKT8(bmReqType, bRequest, wValLo, wValHi, wInd, total) ((uint64_t)(((uint64_t)(bmReqType))<<56)|(((uint64_t)(bRequest))<<48)|(((uint64_t)(wValLo))<<40)|(((uint64_t)(wValHi))<<32)|(((uint64_t)(wInd))<<16)|((uint64_t)(total))) +//#define mkSETUP_PKT16(bmReqType, bRequest, wVal, wInd, total) ((uint64_t)(((uint64_t)(bmReqType))<<56)|(((uint64_t)(bRequest))<<48) |(((uint64_t)(wVal))<<32) |(((uint64_t)(wInd))<<16)|((uint64_t)(total))) + +#endif /* USBCORE_H */ diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_address.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_address.h new file mode 100644 index 000000000000..ce60e44ec5fb --- /dev/null +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_address.h @@ -0,0 +1,248 @@ +/* Copyright (C) 2015-2016 Andrew J. Kroll + and +Copyright (C) 2011 Circuits At Home, LTD. All rights reserved. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +Contact information +------------------- + +Circuits At Home, LTD +Web : http://www.circuitsathome.com +e-mail : support@circuitsathome.com + */ + +#if !defined(_UHS_host_h_) || defined(__ADDRESS_H__) +#error "Never include UHS_address.h directly; include UHS_Usb.h instead" +#else +#define __ADDRESS_H__ + + + +/* NAK powers. To save space in endpoint data structure, amount of retries before giving up and returning 0x4 is stored in */ +/* bmNakPower as a power of 2. The actual nak_limit is then calculated as nak_limit = ( 2^bmNakPower - 1) */ +#define UHS_USB_NAK_MAX_POWER 14 // NAK binary order maximum value +#define UHS_USB_NAK_DEFAULT 13 // default 16K-1 NAKs before giving up +#define UHS_USB_NAK_NOWAIT 1 // Single NAK stops transfer +#define UHS_USB_NAK_NONAK 0 // Do not count NAKs, stop retrying after USB Timeout. Try not to use this. + +#define bmUSB_DEV_ADDR_PORT 0x07 +#define bmUSB_DEV_ADDR_PARENT 0x78 +#define bmUSB_DEV_ADDR_HUB 0x40 + +// TODO: embed parent? +struct UHS_EpInfo { + uint8_t epAddr; // Endpoint address + uint8_t bIface; + uint16_t maxPktSize; // Maximum packet size + + union { + uint8_t epAttribs; + + struct { + uint8_t bmSndToggle : 1; // Send toggle, when zero bmSNDTOG0, bmSNDTOG1 otherwise + uint8_t bmRcvToggle : 1; // Send toggle, when zero bmRCVTOG0, bmRCVTOG1 otherwise + uint8_t bmNeedPing : 1; // 1 == ping protocol needed for next out packet + uint8_t bmNakPower : 5; // Binary order for NAK_LIMIT value + } __attribute__((packed)); + }; +} __attribute__((packed)); + +// TODO: embed parent address and port into epinfo struct, +// and nuke this address stupidity. +// This is a compact scheme. Should also support full spec. +// This produces a 7 hub limit, 49 devices + 7 hubs, 56 total. +// +// 7 6 5 4 3 2 1 0 +// --------------------------------- +// | | H | P | P | P | A | A | A | +// --------------------------------- +// +// H - if 1 the address is a hub address +// P - parent hub number +// A - port number of parent +// + +struct UHS_DeviceAddress { + + union { + + struct { + uint8_t bmAddress : 3; // port number + uint8_t bmParent : 3; // parent hub address + uint8_t bmHub : 1; // hub flag + uint8_t bmReserved : 1; // reserved, must be zero + } __attribute__((packed)); + uint8_t devAddress; + }; +} __attribute__((packed)); + +struct UHS_Device { + volatile UHS_EpInfo *epinfo[UHS_HOST_MAX_INTERFACE_DRIVERS]; // endpoint info pointer + UHS_DeviceAddress address; + uint8_t epcount; // number of endpoints + uint8_t speed; // indicates device speed +} __attribute__((packed)); + +typedef void (*UsbDeviceHandleFunc)(UHS_Device *pdev); + +class AddressPool { + UHS_EpInfo dev0ep; //Endpoint data structure used during enumeration for uninitialized device + + // In order to avoid hub address duplication, this should use bits + uint8_t hubCounter; // hub counter + + UHS_Device thePool[UHS_HOST_MAX_INTERFACE_DRIVERS]; + + // Initializes address pool entry + + void UHS_NI InitEntry(uint8_t index) { + thePool[index].address.devAddress = 0; + thePool[index].epcount = 1; + thePool[index].speed = 0; + for(uint8_t i = 0; i < UHS_HOST_MAX_INTERFACE_DRIVERS; i++) { + thePool[index].epinfo[i] = &dev0ep; + } + }; + + // Returns thePool index for a given address + + uint8_t UHS_NI FindAddressIndex(uint8_t address = 0) { + for(uint8_t i = 1; i < UHS_HOST_MAX_INTERFACE_DRIVERS; i++) { + if(thePool[i].address.devAddress == address) + return i; + } + return 0; + }; + + // Returns thePool child index for a given parent + + uint8_t UHS_NI FindChildIndex(UHS_DeviceAddress addr, uint8_t start = 1) { + for(uint8_t i = (start < 1 || start >= UHS_HOST_MAX_INTERFACE_DRIVERS) ? 1 : start; i < UHS_HOST_MAX_INTERFACE_DRIVERS; i++) { + if(thePool[i].address.bmParent == addr.bmAddress) + return i; + } + return 0; + }; + + // Frees address entry specified by index parameter + + void UHS_NI FreeAddressByIndex(uint8_t index) { + // Zero field is reserved and should not be affected + if(index == 0) + return; + + UHS_DeviceAddress uda = thePool[index].address; + // If a hub was switched off all port addresses should be freed + if(uda.bmHub == 1) { + for(uint8_t i = 1; (i = FindChildIndex(uda, i));) + FreeAddressByIndex(i); + + // FIXME: use BIT MASKS + // If the hub had the last allocated address, hubCounter should be decremented + if(hubCounter == uda.bmAddress) + hubCounter--; + } + InitEntry(index); + } + + void InitAllAddresses(void) { + for(uint8_t i = 1; i < UHS_HOST_MAX_INTERFACE_DRIVERS; i++) InitEntry(i); + hubCounter = 0; + }; +public: + + AddressPool() { + hubCounter = 0; + // Zero address is reserved + InitEntry(0); + + thePool[0].epinfo[0] = &dev0ep; + dev0ep.epAddr = 0; +#if UHS_DEVICE_WINDOWS_USB_SPEC_VIOLATION_DESCRIPTOR_DEVICE + dev0ep.maxPktSize = 0x40; //starting at 0x40 and work down +#else + dev0ep.maxPktSize = 0x08; +#endif + dev0ep.epAttribs = 0; //set DATA0/1 toggles to 0 + dev0ep.bmNakPower = UHS_USB_NAK_MAX_POWER; + InitAllAddresses(); + }; + + // Returns a pointer to a specified address entry + + UHS_Device* UHS_NI GetUsbDevicePtr(uint8_t addr) { + if(!addr) + return thePool; + + uint8_t index = FindAddressIndex(addr); + + return (!index) ? NULL : &thePool[index]; + }; + + + // Allocates new address + + uint8_t UHS_NI AllocAddress(uint8_t parent, bool is_hub = false, uint8_t port = 1) { + /* if (parent != 0 && port == 0) + USB_HOST_SERIAL.println("PRT:0"); */ + UHS_DeviceAddress _parent; + _parent.devAddress = parent; + if(_parent.bmReserved || port > 7) + //if(parent > 127 || port > 7) + return 0; + + // FIXME: use BIT MASKS + if(is_hub && hubCounter == 7) + return 0; + + // finds first empty address entry starting from one + uint8_t index = FindAddressIndex(0); + + if(!index) // if empty entry is not found + return 0; + + UHS_DeviceAddress addr; + addr.devAddress = port; + addr.bmParent = _parent.bmAddress; + + // FIXME: use BIT MASKS + if(is_hub) { + hubCounter++; + addr.bmHub = 1; + addr.bmAddress = hubCounter; + } + thePool[index].address = addr; +#if DEBUG_PRINTF_EXTRA_HUGE +#if defined(UHS_DEBUG_USB_ADDRESS) + printf("Address: %x (%x.%x.%x)\r\n", addr.devAddress, addr.bmHub, addr.bmParent, addr.bmAddress); +#endif +#endif + return thePool[index].address.devAddress; + }; + + void UHS_NI FreeAddress(uint8_t addr) { + // if the root hub is disconnected all the addresses should be initialized + if(addr == 0x41) { + InitAllAddresses(); + return; + } + uint8_t index = FindAddressIndex(addr); + FreeAddressByIndex(index); + }; + +}; + +#endif // __ADDRESS_H__ diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_hexdump.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_hexdump.h new file mode 100644 index 000000000000..1e12908a8923 --- /dev/null +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_hexdump.h @@ -0,0 +1,70 @@ +/* Copyright (C) 2015-2016 Andrew J. Kroll + and +Copyright (C) 2011 Circuits At Home, LTD. All rights reserved. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +Contact information +------------------- + +Circuits At Home, LTD +Web : http://www.circuitsathome.com +e-mail : support@circuitsathome.com + */ +#if !defined(_usb_h_) || defined(__HEXDUMP_H__) +#error "Never include UHS_hexdump.h directly; include UHS_Usb.h instead" +#else +#define __HEXDUMP_H__ + +extern int UsbDEBUGlvl; + +template +class HexDumper : public BASE_CLASS { + uint8_t byteCount; + OFFSET_TYPE byteTotal; + +public: + + HexDumper() : byteCount(0), byteTotal(0) { + }; + + void Initialize(void) { + byteCount = 0; + byteTotal = 0; + }; + + virtual void Parse(const LEN_TYPE len, const uint8_t *pbuf, const OFFSET_TYPE &offset); +}; + +template +void HexDumper::Parse(const LEN_TYPE len, const uint8_t *pbuf, const OFFSET_TYPE &offset) { + if(UsbDEBUGlvl >= 0x80) { // Fully bypass this block of code if we do not debug. + for(LEN_TYPE j = 0; j < len; j++, byteCount++, byteTotal++) { + if(!byteCount) { + PrintHex (byteTotal, 0x80); + E_Notify(PSTR(": "), 0x80); + } + PrintHex (pbuf[j], 0x80); + E_Notify(PSTR(" "), 0x80); + + if(byteCount == 15) { + E_Notify(PSTR("\r\n"), 0x80); + byteCount = 0xFF; + } + } + } +} + +#endif // __HEXDUMP_H__ diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_host.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_host.h new file mode 100644 index 000000000000..36ca2bfc4d3c --- /dev/null +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_host.h @@ -0,0 +1,111 @@ +/* Copyright (C) 2015-2016 Andrew J. Kroll + and +Copyright (C) 2011 Circuits At Home, LTD. All rights reserved. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +Contact information +------------------- + +Circuits At Home, LTD +Web : http://www.circuitsathome.com +e-mail : support@circuitsathome.com + */ +/* USB functions */ +#ifndef _UHS_host_h_ +#define _UHS_host_h_ + +// WARNING: Do not change the order of includes, or stuff will break! +#include +#include +#include +#include + +#if DISABLED(USE_UHS3_USB) +#include +#include +#include +#include +#endif +#include "UHS_macros.h" + +// None of these should ever be directly included by a driver, or a user's sketch. +#include "../dyn_SWI/dyn_SWI.h" +#include "UHS_USB_IDs.h" +#include "UHS_settings.h" +#include "UHS_usb_ch9.h" +#include "UHS_UsbCore.h" +#include "UHS_address.h" +#include "UHS_usbhost.h" +#include "UHS_printhex.h" +#include "UHS_message.h" + +// Load system components as required +#if defined(LOAD_USB_HOST_SYSTEM) && !defined(USB_HOST_SYSTEM_LOADED) +#include "UHS_util_INLINE.h" +#include "UHS_host_INLINE.h" +#include "UHS_printf_HELPER.h" + +#if defined(LOAD_USB_HOST_SHIELD) +#include "USB_HOST_SHIELD/USB_HOST_SHIELD.h" +#endif + +#if defined(LOAD_UHS_KINETIS_FS_HOST) && !defined(UHS_KINETIS_FS_HOST_LOADED) +#include "UHS_KINETIS_FS_HOST/UHS_KINETIS_FS_HOST.h" +#endif + +#if defined(LOAD_UHS_KINETIS_EHCI) && !defined(UHS_KINETIS_EHCI_LOADED) +#include "UHS_KINETIS_EHCI/UHS_KINETIS_EHCI.h" +#endif + +// Load USB drivers and multiplexers + +#if defined(LOAD_UHS_HUB) +#include "UHS_HUB/UHS_HUB.h" +#endif // HUB loaded + +#if defined(LOAD_UHS_BULK_STORAGE) +#include "UHS_BULK_STORAGE/UHS_BULK_STORAGE.h" +#endif + +#if defined(LOAD_GENERIC_STORAGE) +#include "../UHS_FS/UHS_FS.h" +#endif +// Add BT and optionally HID if directed to do so +#if defined(LOAD_UHS_BT) +#include "UHS_BT/UHS_BT.h" +#endif // BT and optionally HID loaded + +// Add HID +#if defined(LOAD_UHS_HID) +#include "UHS_HID/UHS_HID.h" +#endif // HID loaded + +// Add CDC multiplexers (currently only ACM) +#if defined(LOAD_UHS_CDC_ACM) || defined(LOAD_UHS_CDC_ACM_FTDI) || defined(LOAD_UHS_CDC_ACM_PROLIFIC) || defined(LOAD_UHS_CDC_ACM_XR21B1411) +#include "UHS_CDC/UHS_CDC.h" +#endif // CDC loaded + +#if defined(LOAD_UHS_ADK) +#include "UHS_ADK/UHS_ADK.h" +#endif + +#if defined(LOAD_UHS_MIDI) +#include "UHS_MIDI/UHS_MIDI.h" +#endif + +#endif // System code loaded + +#endif // _UHS_host_h_ diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_host_INLINE.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_host_INLINE.h new file mode 100644 index 000000000000..908391a157f1 --- /dev/null +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_host_INLINE.h @@ -0,0 +1,1224 @@ +/* Copyright (C) 2015-2016 Andrew J. Kroll + and +Copyright (C) 2011 Circuits At Home, LTD. All rights reserved. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +Contact information +------------------- + +Circuits At Home, LTD +Web : http://www.circuitsathome.com +e-mail : support@circuitsathome.com + */ + +#if defined(LOAD_USB_HOST_SYSTEM) && !defined(USB_HOST_SYSTEM_LOADED) +#define USB_HOST_SYSTEM_LOADED + +#ifndef DEBUG_PRINTF_EXTRA_HUGE_UHS_HOST +#define DEBUG_PRINTF_EXTRA_HUGE_UHS_HOST 0 +#endif + +#if DEBUG_PRINTF_EXTRA_HUGE +#if DEBUG_PRINTF_EXTRA_HUGE_UHS_HOST +#define HOST_DEBUG(...) printf(__VA_ARGS__) +#else +#define HOST_DEBUG(...) VOID0 +#endif +#else +#define HOST_DEBUG(...) VOID0 +#endif + +UHS_EpInfo* UHS_USB_HOST_BASE::getEpInfoEntry(uint8_t addr, uint8_t ep) { + UHS_Device *p = addrPool.GetUsbDevicePtr(addr); + + if(!p || !p->epinfo) + return NULL; + + + UHS_EpInfo *pep; + for(uint8_t j = 0; j < UHS_HOST_MAX_INTERFACE_DRIVERS; j++) { + pep = (UHS_EpInfo *)(p->epinfo[j]); + + for(uint8_t i = 0; i < p->epcount; i++) { + if((pep)->epAddr == ep) { + HOST_DEBUG("ep entry for interface %d ep %d max packet size = %d\r\n", pep->bIface, ep, pep->maxPktSize); + return pep; + } + + pep++; + } + } + return NULL; +} + +/** + * Sets a device table entry for a device. + * Each device is different and has different number of endpoints. + * This function plugs endpoint record structure, defined in application, to devtable + * + * @param addr device address + * @param epcount how many endpoints + * @param eprecord pointer to the endpoint structure + * @return Zero for success, or error code + */ +uint8_t UHS_USB_HOST_BASE::setEpInfoEntry(uint8_t addr, uint8_t iface, uint8_t epcount, volatile UHS_EpInfo* eprecord) { + if(!eprecord) + return UHS_HOST_ERROR_BAD_ARGUMENT; + + UHS_Device *p = addrPool.GetUsbDevicePtr(addr); + + if(!p) + return UHS_HOST_ERROR_NO_ADDRESS_IN_POOL; + + p->address.devAddress = addr; + p->epinfo[iface] = eprecord; + p->epcount = epcount; + return 0; +} + +/** + * sets all enpoint addresses to zero. + * Sets all max packet sizes to defaults + * Clears all endpoint attributes + * Sets bmNakPower to USB_NAK_DEFAULT + * Sets binterface to zero. + * Sets bNumEP to zero. + * Sets bAddress to zero. + * Clears qNextPollTime and sets bPollEnable to false. + * + * @param maxep How many endpoints to initialize + * @param device pointer to the device driver instance (this) + * + */ + +void UHS_USB_HOST_BASE::DeviceDefaults(uint8_t maxep, UHS_USBInterface *interface) { + + for(uint8_t i = 0; i < maxep; i++) { + interface->epInfo[i].epAddr = 0; + interface->epInfo[i].maxPktSize = (i) ? 0 : 8; + interface->epInfo[i].epAttribs = 0; + interface->epInfo[i].bmNakPower = UHS_USB_NAK_DEFAULT; + } + interface->pUsb->GetAddressPool()->FreeAddress(interface->bAddress); + interface->bIface = 0; + interface->bNumEP = 1; + interface->bAddress = 0; + interface->qNextPollTime = 0; + interface->bPollEnable = false; +} + +/** + * Perform a bus reset to the port of the connected device + * + * @param parent index to Parent + * @param port what port on the parent + * @param address address of the device + * @return Zero for success, or error code + */ + +uint8_t UHS_USB_HOST_BASE::doSoftReset(uint8_t parent, uint8_t port, uint8_t address) { + uint8_t rcode = 0; + + if(parent == 0) { + // Send a bus reset on the root interface. + doHostReset(); + } else { + // reset parent port + devConfig[parent]->ResetHubPort(port); + } + + // + // Many devices require a delay before setting the address here... + // We loop upon fails for up to 2 seconds instead. + // Most devices will be happy without a retry. + // + uint8_t retries = 0; + if(address) { + do { + rcode = setAddr(0, address); + if(!rcode) break; + retries++; + sof_delay(10); + } while(retries < 200); + HOST_DEBUG("%i retries.\r\n", retries); + } else { +#if DEBUG_PRINTF_EXTRA_HUGE + printf("\r\ndoSoftReset called with address == 0.\r\n"); +#endif + } + return rcode; +} + +/* + * Pseudo code so you may understand the code flow. + * + * reset; (happens at the lower level) + * GetDevDescr(); + * reset; + * If there are no configuration descriptors { + * // + * // Note: I know of no device that does this. + * // I suppose there could be one though. + * // + * try to enumerate. + * } else { + * last success count = 0 + * best config = 0 + * for each configuration descriptor { + * for each interface descriptor { + * get the endpoint descriptors for this interface. + * Check to see if a driver can handle this interface. + * If it can, add 1 to the success count. + * } + * if success count > last success count { + * best config = current config + * last success count = success count + * } + * } + * set the device config to the best config + * for each best config interface descriptor { + * initialize driver that can handle this interface config + * } + * } + * + * NOTES: + * 1: We do not need to save toggle states anymore and have not + * needed to for some time, because the lower level driver + * actually corrects wrong toggles on-the-fly for us. + * + * 2: We always do a second reset, since this stupid bug is + * actually part of the specification documents that I + * have found all over the net. Even Linux does it, and + * many devices actually EXPECT this behavior. Some devices + * will not enumerate without it. For devices that do not + * need it, the additional reset is harmless. Here is an + * example of one of these documents, see page Five: + * http://www.ftdichip.com/Support/Documents/TechnicalNotes/TN_113_Simplified%20Description%20of%20USB%20Device%20Enumeration.pdf + * + * + */ + +/** + * Enumerates interfaces on devices + * + * @param parent index to Parent + * @param port what port on the parent + * @param speed the speed of the device + * @return Zero for success, or error code + */ +uint8_t UHS_USB_HOST_BASE::Configuring(uint8_t parent, uint8_t port, uint8_t speed) { + //uint8_t bAddress = 0; + HOST_DEBUG("\r\n\r\n\r\nConfiguring: parent = %i, port = %i, speed = %i\r\n", parent, port, speed); + uint8_t rcode = 0; + uint8_t retries = 0; + uint8_t numinf = 0; + uint8_t configs; + UHS_Device *p = NULL; + //EpInfo epInfo; // cap at 16, this should be fairly reasonable. + ENUMERATION_INFO ei; + uint8_t bestconf = 0; + uint8_t bestsuccess = 0; + + uint8_t devConfigIndex; + +#if UHS_DEVICE_WINDOWS_USB_SPEC_VIOLATION_DESCRIPTOR_DEVICE + const uint8_t biggest = 0x40; + // wrap in {} to throw away the 64 byte buffer when we are done with it + { + uint8_t buf[biggest]; + USB_DEVICE_DESCRIPTOR *udd = reinterpret_cast(buf); +#else + const uint8_t biggest = 18; + uint8_t buf[biggest]; + USB_DEVICE_DESCRIPTOR *udd = reinterpret_cast(buf); + USB_CONFIGURATION_DESCRIPTOR *ucd = reinterpret_cast(buf); +#endif + + //for(devConfigIndex = 0; devConfigIndex < UHS_HOST_MAX_INTERFACE_DRIVERS; devConfigIndex++) { + // if((devConfig[devConfigIndex]->bAddress) && (!devConfig[devConfigIndex]->bPollEnable)) { + // devConfig[devConfigIndex]->bAddress = 0; + // } + //} + // Serial.print("HOST USB Host @ 0x"); + // Serial.println((uint32_t)this, HEX); + // Serial.print("HOST USB Host Address Pool @ 0x"); + // Serial.println((uint32_t)GetAddressPool(), HEX); + + sof_delay(200); + p = addrPool.GetUsbDevicePtr(0); + if(!p) { + HOST_DEBUG("Configuring error: USB_ERROR_ADDRESS_NOT_FOUND_IN_POOL\r\n"); + return UHS_HOST_ERROR_NO_ADDRESS_IN_POOL; + } + + p->speed = speed; +#if UHS_DEVICE_WINDOWS_USB_SPEC_VIOLATION_DESCRIPTOR_DEVICE + + p->epinfo[0][0].maxPktSize = 0x40; // Windows bug is expected. + // poison data + // udd->bMaxPacketSize0 = 0U; +#else + p->epinfo[0][0].maxPktSize = 0x08; // USB Spec, start small, work your way up. +#endif +again: + memset((void *)buf, 0, biggest); + HOST_DEBUG("\r\n\r\nConfiguring PktSize 0x%2.2x, rcode: 0x%2.2x, retries %i,\r\n", p->epinfo[0][0].maxPktSize, rcode, retries); + rcode = getDevDescr(0, biggest, (uint8_t*)buf); +#if UHS_DEVICE_WINDOWS_USB_SPEC_VIOLATION_DESCRIPTOR_DEVICE + if(rcode || udd->bMaxPacketSize0 < 8) +#else + if(rcode) +#endif + { + if(rcode == UHS_HOST_ERROR_JERR && retries < 4) { + // + // Some devices return JERR when plugged in. + // Attempts to reinitialize the device usually works. + // + // I have a hub that will refuse to work and acts like + // this unless external power is supplied. + // So this may not always work, and you may be fooled. + // + sof_delay(100); + retries++; + goto again; +#if UHS_DEVICE_WINDOWS_USB_SPEC_VIOLATION_DESCRIPTOR_DEVICE + } else if(((rcode == UHS_HOST_ERROR_DMA || rcode == UHS_HOST_ERROR_MEM_LAT) && retries < 4) || (udd->bMaxPacketSize0 < 8 && !rcode)) { + + if(p->epinfo[0][0].maxPktSize > 8 && rcode == UHS_HOST_ERROR_DMA) p->epinfo[0][0].maxPktSize = p->epinfo[0][0].maxPktSize >> 1; +#else + } else if((rcode == UHS_HOST_ERROR_DMA || rcode == UHS_HOST_ERROR_MEM_LAT) && retries < 4) { + if(p->epinfo[0][0].maxPktSize < 32) p->epinfo[0][0].maxPktSize = p->epinfo[0][0].maxPktSize << 1; +#endif + HOST_DEBUG("Configuring error: 0x%2.2x UHS_HOST_ERROR_DMA. Retry with maxPktSize: %i\r\n", rcode, p->epinfo[0][0].maxPktSize); + doSoftReset(parent, port, 0); + retries++; + sof_delay(200); + goto again; + } + HOST_DEBUG("Configuring error: 0x%2.2x Can't get USB_DEVICE_DESCRIPTOR\r\n", rcode); + return rcode; + } + + +#if UHS_DEVICE_WINDOWS_USB_SPEC_VIOLATION_DESCRIPTOR_DEVICE + ei.address = addrPool.AllocAddress(parent, false, port); + + if(!ei.address) { + return UHS_HOST_ERROR_ADDRESS_POOL_FULL; + } + + p = addrPool.GetUsbDevicePtr(ei.address); + // set to 1 if you suspect address table corruption. +#if 0 + if(!p) { + return UHS_HOST_ERROR_NO_ADDRESS_IN_POOL; + } +#endif + + p->speed = speed; + + rcode = doSoftReset(parent, port, ei.address); + + if(rcode) { + addrPool.FreeAddress(ei.address); + HOST_DEBUG("Configuring error: %2.2x Can't set USB INTERFACE ADDRESS\r\n", rcode); + return rcode; + } + + { // the { } wrapper saves on stack. + HOST_DEBUG("DevDescr 2nd poll, bMaxPacketSize0:%u\r\n", udd->bMaxPacketSize0); + UHS_EpInfo dev1ep; + dev1ep.maxPktSize = udd->bMaxPacketSize0; + dev1ep.epAddr = 0; + dev1ep.epAttribs = 0; + dev1ep.bmNakPower = UHS_USB_NAK_MAX_POWER; + p->address.devAddress = ei.address; + p->epcount = 1; + p->epinfo[0] = &dev1ep; + + sof_delay(10); + memset((void *)buf, 0, biggest); + rcode = getDevDescr(ei.address, 18, (uint8_t*)buf); + if(rcode) HOST_DEBUG("getDevDescr err: 0x%x \r\n", rcode); + + addrPool.FreeAddress(ei.address); + if(rcode && rcode != UHS_HOST_ERROR_DMA) { + return rcode; + } + sof_delay(10); + } +#endif + + ei.vid = udd->idVendor; + ei.pid = udd->idProduct; + ei.bcdDevice = udd->bcdDevice; + ei.klass = udd->bDeviceClass; + ei.subklass = udd->bDeviceSubClass; + ei.protocol = udd->bDeviceProtocol; + ei.bMaxPacketSize0 = udd->bMaxPacketSize0; + ei.currentconfig = 0; + ei.parent = parent; + ei.port = port; + configs = udd->bNumConfigurations; +#if UHS_DEVICE_WINDOWS_USB_SPEC_VIOLATION_DESCRIPTOR_DEVICE + } // unwrapped, old large buf now invalid and discarded. + + uint8_t buf[18]; + USB_CONFIGURATION_DESCRIPTOR *ucd = reinterpret_cast(buf); +#endif + + ei.address = addrPool.AllocAddress(parent, IsHub(ei.klass), port); + + if(!ei.address) { + return UHS_HOST_ERROR_ADDRESS_POOL_FULL; + } + + p = addrPool.GetUsbDevicePtr(ei.address); + // set to 1 if you suspect address table corruption. +#if 0 + if(!p) { + return UHS_HOST_ERROR_NO_ADDRESS_IN_POOL; + } +#endif + + p->speed = speed; + + rcode = doSoftReset(parent, port, ei.address); + + if(rcode) { + addrPool.FreeAddress(ei.address); + HOST_DEBUG("Configuring error: %2.2x Can't set USB INTERFACE ADDRESS\r\n", rcode); + return rcode; + } + + if(configs < 1) { + HOST_DEBUG("No interfaces?!\r\n"); + addrPool.FreeAddress(ei.address); + // rcode = TestInterface(&ei); + // Not implemented (yet) + rcode = UHS_HOST_ERROR_DEVICE_NOT_SUPPORTED; + } else { + HOST_DEBUG("configs: %i\r\n", configs); + for(uint8_t conf = 0; (!rcode) && (conf < configs); conf++) { + // read the config descriptor into a buffer. + rcode = getConfDescr(ei.address, sizeof (USB_CONFIGURATION_DESCRIPTOR), conf, buf); + if(rcode) { + HOST_DEBUG("Configuring error: %2.2x Can't get USB_INTERFACE_DESCRIPTOR\r\n", rcode); + rcode = UHS_HOST_ERROR_FailGetConfDescr; + continue; + } + ei.currentconfig = conf; + numinf = ucd->bNumInterfaces; // Does _not_ include alternates! + HOST_DEBUG("CONFIGURATION: %i, bNumInterfaces %i, wTotalLength %i\r\n", conf, numinf, ucd->wTotalLength); + uint8_t success = 0; + uint16_t inf = 0; + uint8_t data[ei.bMaxPacketSize0]; + UHS_EpInfo *pep; + pep = ctrlReqOpen(ei.address, mkSETUP_PKT8(UHS_bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, ei.currentconfig, USB_DESCRIPTOR_CONFIGURATION, 0x0000U, ucd->wTotalLength), data); + if(!pep) { + rcode = UHS_HOST_ERROR_NULL_EPINFO; + continue; + } + uint16_t left; + uint16_t read; + uint8_t offset; + rcode = initDescrStream(&ei, ucd, pep, data, &left, &read, &offset); + if(rcode) { + HOST_DEBUG("Configuring error: %2.2x Can't get USB_INTERFACE_DESCRIPTOR stream.\r\n", rcode); + break; + } + for(; (numinf) && (!rcode); inf++) { + // iterate for each interface on this config + rcode = getNextInterface(&ei, pep, data, &left, &read, &offset); + if(rcode == UHS_HOST_ERROR_END_OF_STREAM) { + HOST_DEBUG("USB_INTERFACE END OF STREAM\r\n"); + ctrlReqClose(pep, UHS_bmREQ_GET_DESCR, left, ei.bMaxPacketSize0, data); + rcode = 0; + break; + } + if(rcode) { + HOST_DEBUG("Configuring error: %2.2x Can't close USB_INTERFACE_DESCRIPTOR stream.\r\n", rcode); + continue; + } + rcode = TestInterface(&ei); + if(!rcode) success++; + rcode = 0; + } + if(!inf) { + rcode = TestInterface(&ei); + if(!rcode) success++; + rcode = 0; + } + if(success > bestsuccess) { + bestconf = conf; + bestsuccess = success; + } + } + if(!bestsuccess) rcode = UHS_HOST_ERROR_DEVICE_NOT_SUPPORTED; + } + if(!rcode) { + rcode = getConfDescr(ei.address, sizeof (USB_CONFIGURATION_DESCRIPTOR), bestconf, buf); + if(rcode) { + HOST_DEBUG("Configuring error: %2.2x Can't get USB_INTERFACE_DESCRIPTOR\r\n", rcode); + rcode = UHS_HOST_ERROR_FailGetConfDescr; + } + } + if(!rcode) { + bestconf++; + ei.currentconfig = bestconf; + numinf = ucd->bNumInterfaces; // Does _not_ include alternates! + HOST_DEBUG("CONFIGURATION: %i, bNumInterfaces %i, wTotalLength %i\r\n", bestconf, numinf, ucd->wTotalLength); + if(!rcode) { + HOST_DEBUG("Best configuration is %i, enumerating interfaces.\r\n", bestconf); + uint16_t inf = 0; + uint8_t data[ei.bMaxPacketSize0]; + UHS_EpInfo *pep; + pep = ctrlReqOpen(ei.address, mkSETUP_PKT8(UHS_bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, ei.currentconfig - 1, USB_DESCRIPTOR_CONFIGURATION, 0x0000U, ucd->wTotalLength), data); + if(!pep) { + rcode = UHS_HOST_ERROR_NULL_EPINFO; + + } else { + uint16_t left; + uint16_t read; + uint8_t offset; + rcode = initDescrStream(&ei, ucd, pep, data, &left, &read, &offset); + if(rcode) { + HOST_DEBUG("Configuring error: %2.2x Can't get USB_INTERFACE_DESCRIPTOR stream.\r\n", rcode); + } else { + for(; (numinf) && (!rcode); inf++) { + // iterate for each interface on this config + rcode = getNextInterface(&ei, pep, data, &left, &read, &offset); + if(rcode == UHS_HOST_ERROR_END_OF_STREAM) { + ctrlReqClose(pep, UHS_bmREQ_GET_DESCR, left, ei.bMaxPacketSize0, data); + rcode = 0; + break; + } + if(rcode) { + HOST_DEBUG("Configuring error: %2.2x Can't close USB_INTERFACE_DESCRIPTOR stream.\r\n", rcode); + continue; + } + + if(enumerateInterface(&ei) == UHS_HOST_MAX_INTERFACE_DRIVERS) { + HOST_DEBUG("No interface driver for this interface."); + } else { + HOST_DEBUG("Interface Configured\r\n"); + } + } + } + } + } else { + HOST_DEBUG("Configuring error: %2.2x Can't set USB_INTERFACE_CONFIG stream.\r\n", rcode); + } + } + + if(!rcode) { + rcode = setConf(ei.address, bestconf); + if(rcode) { + HOST_DEBUG("Configuring error: %2.2x Can't set Configuration.\r\n", rcode); + addrPool.FreeAddress(ei.address); + } else { + for(devConfigIndex = 0; devConfigIndex < UHS_HOST_MAX_INTERFACE_DRIVERS; devConfigIndex++) { + HOST_DEBUG("Driver %i ", devConfigIndex); + if(!devConfig[devConfigIndex]) { + HOST_DEBUG("no driver at this index.\r\n"); + continue; // no driver + } + HOST_DEBUG("@ %2.2x ", devConfig[devConfigIndex]->bAddress); + if(devConfig[devConfigIndex]->bAddress) { + if(!devConfig[devConfigIndex]->bPollEnable) { + HOST_DEBUG("Initialize\r\n"); + rcode = devConfig[devConfigIndex]->Finalize(); + rcode = devConfig[devConfigIndex]->Start(); + if(!rcode) { + HOST_DEBUG("Total endpoints = (%i)%i\r\n", p->epcount, devConfig[devConfigIndex]->bNumEP); + } else { + break; + } + } else { + HOST_DEBUG("Already initialized.\r\n"); + continue; // consumed + } + } else { + HOST_DEBUG("Skipped\r\n"); + } + } +#if 0 // defined(UHS_HID_LOADED) + // Now do HID +#endif + } + } else { + addrPool.FreeAddress(ei.address); + } + return rcode; +} + +/** + * Removes a device from the tables + * + * @param addr address of the device + * @return nothing + */ +void UHS_USB_HOST_BASE::ReleaseDevice(uint8_t addr) { + if(addr) { +#if 0 // defined(UHS_HID_LOADED) + // Release any HID children + UHS_HID_Release(this, addr); +#endif + for(uint8_t i = 0; i < UHS_HOST_MAX_INTERFACE_DRIVERS; i++) { + if(!devConfig[i]) continue; + if(devConfig[i]->bAddress == addr) { + devConfig[i]->Release(); + break; + } + } + } +} + +/** + * Gets the device descriptor, or part of it from endpoint Zero. + * + * @param addr Address of the device + * @param nbytes how many bytes to return + * @param dataptr pointer to the data to return + * @return status of the request, zero is success. + */ +uint8_t UHS_USB_HOST_BASE::getDevDescr(uint8_t addr, uint16_t nbytes, uint8_t* dataptr) { + return ( ctrlReq(addr, mkSETUP_PKT8(UHS_bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, 0x00, USB_DESCRIPTOR_DEVICE, 0x0000, nbytes), nbytes, dataptr)); +} + +/** + * Gets the config descriptor, or part of it from endpoint Zero. + * + * @param addr Address of the device + * @param nbytes how many bytes to return + * @param conf index to descriptor to return + * @param dataptr ointer to the data to return + * @return status of the request, zero is success. + */ +uint8_t UHS_USB_HOST_BASE::getConfDescr(uint8_t addr, uint16_t nbytes, uint8_t conf, uint8_t* dataptr) { + return ( ctrlReq(addr, mkSETUP_PKT8(UHS_bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, conf, USB_DESCRIPTOR_CONFIGURATION, 0x0000, nbytes), nbytes, dataptr)); +} + +/** + * Get the string descriptor from a device + * + * @param addr Address of the device + * @param ns + * @param index + * @param langid language ID + * @param dataptr pointer to the data to return + * @return status of the request, zero is success. + */ +uint8_t UHS_USB_HOST_BASE::getStrDescr(uint8_t addr, uint16_t ns, uint8_t index, uint16_t langid, uint8_t* dataptr) { + return ( ctrlReq(addr, mkSETUP_PKT8(UHS_bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, index, USB_DESCRIPTOR_STRING, langid, ns), ns, dataptr)); +} + +// +//set address +// + +/** + * Set the address of a device to a new address via endpoint Zero. + * + * @param oldaddr current address + * @param newaddr new address + * @return status of the request, zero is success. + */ +uint8_t UHS_USB_HOST_BASE::setAddr(uint8_t oldaddr, uint8_t newaddr) { + uint8_t rcode = ctrlReq(oldaddr, mkSETUP_PKT8(UHS_bmREQ_SET, USB_REQUEST_SET_ADDRESS, newaddr, 0x00, 0x0000, 0x0000), 0x0000, NULL); + sof_delay(300); // Older spec says you should wait at least 200ms + return rcode; +} + +// +//set configuration +// + +/** + * Set the configuration for the device to use via endpoint Zero. + * + * @param addr Address of the device + * @param conf_value configuration index value + * @return status of the request, zero is success. + */ +uint8_t UHS_USB_HOST_BASE::setConf(uint8_t addr, uint8_t conf_value) { + return ( ctrlReq(addr, mkSETUP_PKT8(UHS_bmREQ_SET, USB_REQUEST_SET_CONFIGURATION, conf_value, 0x00, 0x0000, 0x0000), 0x0000, NULL)); +} + +/* rcode 0 if no errors. rcode 01-0f is relayed from HRSL */ + +/** + * Writes data to an interface pipe + * + * @param addr Address of the device + * @param ep Endpoint of the pipe + * @param nbytes number of bytes to transfer + * @param data pointer to buffer to hold transfer + * @return zero for success or error code + */ +uint8_t UHS_USB_HOST_BASE::outTransfer(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t* data) { + UHS_EpInfo *pep = NULL; + uint16_t nak_limit = 0; + HOST_DEBUG("outTransfer: addr: 0x%2.2x ep: 0x%2.2x nbytes: 0x%4.4x data: 0x%p\r\n", addr, ep, nbytes, data); + + uint8_t rcode = SetAddress(addr, ep, &pep, nak_limit); + HOST_DEBUG("outTransfer: SetAddress 0x%2.2x\r\n", rcode); + if(!rcode) + rcode = OutTransfer(pep, nak_limit, nbytes, data); + return rcode; +}; + +/** + * Reads data from an interface pipe + * + * @param addr Address of the device + * @param ep Endpoint of the pipe + * @param nbytesptr number of bytes to transfer + * @param data pointer to buffer to hold transfer + * @return zero for success or error code + */ +uint8_t UHS_USB_HOST_BASE::inTransfer(uint8_t addr, uint8_t ep, uint16_t *nbytesptr, uint8_t* data) { + UHS_EpInfo *pep = NULL; + uint16_t nak_limit = 0; + + uint8_t rcode = SetAddress(addr, ep, &pep, nak_limit); + + // if(rcode) { + // USBTRACE3("(USB::InTransfer) SetAddress Failed ", rcode, 0x81); + // USBTRACE3("(USB::InTransfer) addr requested ", addr, 0x81); + // USBTRACE3("(USB::InTransfer) ep requested ", ep, 0x81); + // return rcode; + // } + if(!rcode) + rcode = InTransfer(pep, nak_limit, nbytesptr, data); + return rcode; + +} + +/** + * Initialize the descriptor stream, works much like opening a file. + * + * @param ei + * @param ucd + * @param pep + * @param data + * @param left + * @param read + * @param offset + * @return zero for success or error code + */ +uint8_t UHS_USB_HOST_BASE::initDescrStream(ENUMERATION_INFO *ei, USB_CONFIGURATION_DESCRIPTOR *ucd, UHS_EpInfo *pep, uint8_t *data, uint16_t *left, uint16_t *read, uint8_t *offset) { + if(!ei || !ucd) return UHS_HOST_ERROR_BAD_ARGUMENT; + if(!pep) return UHS_HOST_ERROR_NULL_EPINFO; + *left = ucd->wTotalLength; + *read = 0; + *offset = 1; + uint8_t rcode; + pep->maxPktSize = ei->bMaxPacketSize0; + rcode = getone(pep, left, read, data, offset); + return rcode; +} + +uint8_t UHS_USB_HOST_BASE::getNextInterface(ENUMERATION_INFO *ei, UHS_EpInfo *pep, uint8_t data[], uint16_t *left, uint16_t *read, uint8_t *offset) { + uint16_t remain; + uint8_t ty; + uint8_t rcode = UHS_HOST_ERROR_END_OF_STREAM; + uint8_t *ptr; + uint8_t epc = 0; + ei->interface.numep = 0; + ei->interface.klass = 0; + ei->interface.subklass = 0; + ei->interface.protocol = 0; + while(*left + *read) { + remain = data[*offset]; // bLength + while(remain < 2) { + rcode = getone(pep, left, read, data, offset); + if(rcode) + return rcode; + remain = data[*offset]; + } + rcode = getone(pep, left, read, data, offset); + if(rcode) + return rcode; + ty = data[*offset]; // bDescriptorType + HOST_DEBUG("bLength: %i ", remain); + HOST_DEBUG("bDescriptorType: %2.2x\r\n", ty); + remain--; + if(ty == USB_DESCRIPTOR_INTERFACE) { + HOST_DEBUG("INTERFACE DESCRIPTOR FOUND\r\n"); + ptr = (uint8_t *)(&(ei->interface.bInterfaceNumber)); + for(int i = 0; i < 6; i++) { + rcode = getone(pep, left, read, data, offset); + if(rcode) + return rcode; + *ptr = data[*offset]; + ptr++; + } + rcode = getone(pep, left, read, data, offset); + if(rcode) + return rcode; + // Now at iInterface + // Get endpoints. + HOST_DEBUG("Getting %i endpoints\r\n", ei->interface.numep); + while(epc < ei->interface.numep) { + rcode = getone(pep, left, read, data, offset); + if(rcode) { + HOST_DEBUG("ENDPOINT DESCRIPTOR DIED WAY EARLY\r\n"); + return rcode; + } + remain = data[*offset]; // bLength + while(remain < 2) { + rcode = getone(pep, left, read, data, offset); + if(rcode) + return rcode; + remain = data[*offset]; + } + rcode = getone(pep, left, read, data, offset); + if(rcode) { + HOST_DEBUG("ENDPOINT DESCRIPTOR DIED EARLY\r\n"); + return rcode; + } + ty = data[*offset]; // bDescriptorType + HOST_DEBUG("bLength: %i ", remain); + HOST_DEBUG("bDescriptorType: %2.2x\r\n", ty); + remain -= 2; + if(ty == USB_DESCRIPTOR_ENDPOINT) { + HOST_DEBUG("ENDPOINT DESCRIPTOR: %i\r\n", epc); + ptr = (uint8_t *)(&(ei->interface.epInfo[epc].bEndpointAddress)); + for(unsigned int i = 0; i< sizeof (ENDPOINT_INFO); i++) { + rcode = getone(pep, left, read, data, offset); + if(rcode) { + HOST_DEBUG("ENDPOINT DESCRIPTOR DIED LATE\r\n"); + return rcode; + } + *ptr = data[*offset]; + ptr++; + remain--; + } + epc++; + HOST_DEBUG("ENDPOINT DESCRIPTOR OK\r\n"); + } + rcode = eat(pep, left, read, data, offset, &remain); + if(rcode) { + HOST_DEBUG("ENDPOINT DESCRIPTOR DIED EATING\r\n"); + return rcode; + } + remain = 0; + } + remain = 1; + // queue ahead, but do not report if error. + rcode = eat(pep, left, read, data, offset, &remain); + if(!ei->interface.numep && rcode) { + return rcode; + } + HOST_DEBUG("ENDPOINT DESCRIPTORS FILLED\r\n"); + return 0; + } else { + rcode = eat(pep, left, read, data, offset, &remain); + if(rcode) + return rcode; + } + rcode = UHS_HOST_ERROR_END_OF_STREAM; + } + return rcode; +} + +uint8_t UHS_USB_HOST_BASE::seekInterface(ENUMERATION_INFO *ei, uint16_t inf, USB_CONFIGURATION_DESCRIPTOR *ucd) { + if(!ei || !ucd) return UHS_HOST_ERROR_BAD_ARGUMENT; + uint8_t data[ei->bMaxPacketSize0]; + UHS_EpInfo *pep; + pep = ctrlReqOpen(ei->address, mkSETUP_PKT8(UHS_bmREQ_GET_DESCR, USB_REQUEST_GET_DESCRIPTOR, ei->currentconfig, + USB_DESCRIPTOR_CONFIGURATION, 0x0000U, ucd->wTotalLength), data); + if(!pep) return UHS_HOST_ERROR_NULL_EPINFO; + uint16_t left = ucd->wTotalLength; + uint8_t cinf = 0; + uint8_t ty; + uint8_t epc = 0; + uint16_t remain = ucd->bLength; + uint16_t read = 0; + uint8_t offset = remain; + uint8_t *ptr; + uint8_t rcode; + ei->interface.numep = 0; + ei->interface.klass = 0; + ei->interface.subklass = 0; + ei->interface.protocol = 0; + pep->maxPktSize = ei->bMaxPacketSize0; + + rcode = getone(pep, &left, &read, data, &offset); + if(rcode) + return rcode; + HOST_DEBUG("\r\nGetting interface: %i\r\n", inf); + inf++; + while(cinf != inf && (left + read)) { + //HOST_DEBUG("getInterface: cinf: %i inf: %i left: %i read: %i offset: %i remain %i\r\n", cinf, inf, left, read, offset, remain); + // Go past current descriptor + HOST_DEBUG("Skip: %i\r\n", remain); + rcode = eat(pep, &left, &read, data, &offset, &remain); + if(rcode) + return rcode; + remain = data[offset]; // bLength + while(remain < 2) { + rcode = getone(pep, &left, &read, data, &offset); + if(rcode) + return rcode; + remain = data[offset]; + } + rcode = getone(pep, &left, &read, data, &offset); + if(rcode) + return rcode; + ty = data[offset]; // bDescriptorType + HOST_DEBUG("bLength: %i ", remain); + HOST_DEBUG("bDescriptorType: %2.2x\r\n", ty); + remain--; + if(ty == USB_DESCRIPTOR_INTERFACE) { + HOST_DEBUG("INTERFACE DESCRIPTOR: %i\r\n", cinf); + cinf++; + if(cinf == inf) { + // Get the interface descriptor information. + ptr = (uint8_t *)(&(ei->interface.bInterfaceNumber)); + for(int i = 0; i < 6; i++) { + rcode = getone(pep, &left, &read, data, &offset); + if(rcode) + return rcode; + *ptr = data[offset]; + ptr++; + } + rcode = getone(pep, &left, &read, data, &offset); + if(rcode) + return rcode; + // Now at iInterface + remain = 0; + // Get endpoints. + HOST_DEBUG("Getting %i endpoints\r\n", ei->interface.numep); + while(epc < ei->interface.numep) { + rcode = getone(pep, &left, &read, data, &offset); + if(rcode) + return rcode; + remain = data[offset]; // bLength + while(remain < 2) { + rcode = getone(pep, &left, &read, data, &offset); + if(rcode) + return rcode; + remain = data[offset]; + } + rcode = getone(pep, &left, &read, data, &offset); + if(rcode) + return rcode; + ty = data[offset]; // bDescriptorType + HOST_DEBUG("bLength: %i ", remain); + HOST_DEBUG("bDescriptorType: %2.2x\r\n", ty); + remain--; + if(ty == USB_DESCRIPTOR_ENDPOINT) { + HOST_DEBUG("ENDPOINT DESCRIPTOR: %i\r\n", epc); + ptr = (uint8_t *)(&(ei->interface.epInfo[epc].bEndpointAddress)); + for(unsigned int i = 0; i< sizeof (ENDPOINT_INFO); i++) { + rcode = getone(pep, &left, &read, data, &offset); + if(rcode) + return rcode; + *ptr = data[offset]; + ptr++; + } + epc++; + remain = 0; + } else { + rcode = eat(pep, &left, &read, data, &offset, &remain); + if(rcode) + return rcode; + remain = 0; + } + } + } + } + } + + return ctrlReqClose(pep, UHS_bmREQ_GET_DESCR, left, ei->bMaxPacketSize0, data); +} + +uint8_t UHS_USB_HOST_BASE::getone(UHS_EpInfo *pep, uint16_t *left, uint16_t *read, uint8_t *dataptr, uint8_t *offset) { + uint8_t rcode = 0; + *offset += 1; + if(*offset < *read) { + return 0; + } else if(*left > 0) { + // uint16_t num = *left; + uint16_t num = pep->maxPktSize; + if(num > *left) num = *left; + *offset = 0; + rcode = ctrlReqRead(pep, left, read, num, dataptr); + if(rcode == 0) { + if(*read == 0) { + rcode = UHS_HOST_ERROR_END_OF_STREAM; + } else if(*read < num) *left = 0; + } + } else { + rcode = UHS_HOST_ERROR_END_OF_STREAM; + } + return rcode; +} + +uint8_t UHS_USB_HOST_BASE::eat(UHS_EpInfo *pep, uint16_t *left, uint16_t *read, uint8_t *dataptr, uint8_t *offset, uint16_t *yum) { + uint8_t rcode = 0; + HOST_DEBUG("eating %i\r\n", *yum); + while(*yum) { + *yum -= 1; + rcode = getone(pep, left, read, dataptr, offset); + if(rcode) break; + } + return rcode; +} + +uint8_t UHS_USB_HOST_BASE::ctrlReq(uint8_t addr, uint64_t Request, uint16_t nbytes, uint8_t* dataptr) { + //bool direction = bmReqType & 0x80; //request direction, IN or OUT + uint8_t rcode = 0; + + // Serial.println(""); + UHS_EpInfo *pep = ctrlReqOpen(addr, Request, dataptr); + if(!pep) { + HOST_DEBUG("ctrlReq1: ERROR_NULL_EPINFO addr: %d\r\n", addr); + return UHS_HOST_ERROR_NULL_EPINFO; + } + uint8_t rt = (uint8_t)(Request & 0xFFU); + + // Serial.println("Opened"); + uint16_t left = (uint16_t)(Request >> 48) /*total*/; + if(dataptr != NULL) { + //data stage + if((rt & 0x80) == 0x80) { + //IN transfer + while(left) { + // Bytes read into buffer + uint16_t read = nbytes; + HOST_DEBUG("ctrlReq2: left: %i, read:%i, nbytes %i\r\n", left, read, nbytes); + rcode = ctrlReqRead(pep, &left, &read, nbytes, dataptr); + +#if UHS_DEVICE_WINDOWS_USB_SPEC_VIOLATION_DESCRIPTOR_DEVICE + HOST_DEBUG("RESULT: 0x%2.2x 0x%2.2x 0x%2.2x 0x%8.8lx%8.8lx\r\n", rcode, addr, read, (uint32_t)((Request>>32)&0xfffffffflu), (uint32_t)(Request&0xfffffffflu)); + // Should only be used for GET_DESCRIPTOR USB_DESCRIPTOR_DEVICE + constexpr uint32_t req_match = ((uint32_t)USB_DESCRIPTOR_DEVICE << 24) | + ((uint32_t)USB_REQUEST_GET_DESCRIPTOR << 8); + const uint32_t req_found = Request & 0xFF00FF00ul; + if(!addr && read && (req_found == req_match)) { + HOST_DEBUG("ctrlReq3: acceptBuffer sz %i nbytes %i left %i\n\r", read, nbytes, left); + left = 0; + rcode = UHS_HOST_ERROR_NONE; + break; + } +#endif + if(rcode) { + return rcode; + } + } + } else { + // OUT transfer + rcode = OutTransfer(pep, 0, nbytes, dataptr); + } + if(rcode) { + //return error + return ( rcode); + } + } + + // Serial.println("Close Phase"); + // Serial.flush(); + // Status stage + rcode = ctrlReqClose(pep, rt, left, nbytes, dataptr); + // Serial.println("Closed"); + return rcode; +} + +uint8_t UHS_USB_HOST_BASE::EPClearHalt(uint8_t addr, uint8_t ep) { + return ctrlReq(addr, mkSETUP_PKT8(USB_SETUP_HOST_TO_DEVICE | USB_SETUP_TYPE_STANDARD | USB_SETUP_RECIPIENT_ENDPOINT, USB_REQUEST_CLEAR_FEATURE, USB_FEATURE_ENDPOINT_HALT, 0, ep, 0), 0, NULL); +} + +uint8_t UHS_USB_HOST_BASE::TestInterface(ENUMERATION_INFO *ei) { + + uint8_t devConfigIndex; + uint8_t rcode = 0; + HOST_DEBUG("TestInterface VID:%4.4x PID:%4.4x Class:%2.2x Subclass:%2.2x Protocol %2.2x\r\n", ei->vid, ei->pid, ei->klass, ei->subklass, ei->protocol); + HOST_DEBUG("Interface data: Class:%2.2x Subclass:%2.2x Protocol %2.2x, number of endpoints %i\r\n", ei->interface.klass, ei->interface.subklass, ei->interface.subklass, ei->interface.numep); + HOST_DEBUG("Parent: %2.2x, bAddress: %2.2x\r\n", ei->parent, ei->address); + for(devConfigIndex = 0; devConfigIndex < UHS_HOST_MAX_INTERFACE_DRIVERS; devConfigIndex++) { + if(!devConfig[devConfigIndex]) { + HOST_DEBUG("No driver at index %i\r\n", devConfigIndex); + continue; // no driver + } + if(devConfig[devConfigIndex]->bAddress) { + HOST_DEBUG("Driver %i is already consumed @ %2.2x\r\n", devConfigIndex, devConfig[devConfigIndex]->bAddress); + continue; // consumed + } + + if(devConfig[devConfigIndex]->OKtoEnumerate(ei)) { + HOST_DEBUG("Driver %i supports this interface\r\n", devConfigIndex); + break; + } + } + if(devConfigIndex == UHS_HOST_MAX_INTERFACE_DRIVERS) { + rcode = UHS_HOST_ERROR_DEVICE_NOT_SUPPORTED; +#if 0 // defined(UHS_HID_LOADED) + // Check HID here, if it is, then lie + if(ei->klass == UHS_USB_CLASS_HID) { + devConfigIndex = UHS_HID_INDEX; // for debugging, otherwise this has no use. + rcode = 0; + } +#endif + } + if(!rcode) HOST_DEBUG("Driver %i can be used for this interface\r\n", devConfigIndex); + else HOST_DEBUG("No driver for this interface.\r\n"); + return rcode; +}; + +uint8_t UHS_USB_HOST_BASE::enumerateInterface(ENUMERATION_INFO *ei) { + uint8_t devConfigIndex; + + HOST_DEBUG("AttemptConfig: parent = %i, port = %i\r\n", ei->parent, ei->port); + +#if 0 // defined(UHS_HID_LOADED) + // Check HID here, if it is, then lie + if(ei->klass == UHS_USB_CLASS_HID || ei->interface.klass == UHS_USB_CLASS_HID) { + UHS_HID_SetUSBInterface(this, ENUMERATION_INFO * ei); + devConfigIndex = UHS_HID_INDEX; + } else +#endif + for(devConfigIndex = 0; devConfigIndex < UHS_HOST_MAX_INTERFACE_DRIVERS; devConfigIndex++) { + if(!devConfig[devConfigIndex]) { + HOST_DEBUG("No driver at index %i\r\n", devConfigIndex); + continue; // no driver + } + if(devConfig[devConfigIndex]->bAddress) { + HOST_DEBUG("Driver %i is already consumed @ %2.2x\r\n", devConfigIndex, devConfig[devConfigIndex]->bAddress); + continue; // consumed + } + + if(devConfig[devConfigIndex]->OKtoEnumerate(ei)) { + HOST_DEBUG("Driver %i supports this interface\r\n", devConfigIndex); + if(!devConfig[devConfigIndex]->SetInterface(ei)) break; + else devConfigIndex = UHS_HOST_MAX_INTERFACE_DRIVERS; + } + } + return devConfigIndex; +}; + + +//////////////////////////////////////////////////////////////////////////////// +// Vendor Specific Interface Class +//////////////////////////////////////////////////////////////////////////////// + +#if 0 +/** + * Might go away, depends on if it is useful, or not. + * + * @param ei Enumeration information + * @return true if this interface driver can handle this interface description + */ +bool UHS_NI UHS_VSI::OKtoEnumerate(ENUMERATION_INFO *ei) { + return ( + (ei->subklass == UHS_USB_CLASS_VENDOR_SPECIFIC) || + (ei->interface.subklass == UHS_USB_CLASS_VENDOR_SPECIFIC) + ); +} + +/** + * Copy the entire ENUMERATION_INFO structure + * @param ei Enumeration information + * @return 0 + */ +uint8_t UHS_NI UHS_VSI::SetInterface(ENUMERATION_INFO *ei) { + bNumEP = 1; + bAddress = ei->address; + + eInfo.address = ei->address; + eInfo.bMaxPacketSize0 = ei->bMaxPacketSize0; + eInfo.currentconfig = ei->currentconfig; + eInfo.interface.bAlternateSetting = ei->interface.bAlternateSetting; + eInfo.interface.bInterfaceNumber = ei->interface.bInterfaceNumber; + eInfo.interface.numep = ei->interface.numep; + eInfo.interface.protocol = ei->interface.protocol; + eInfo.interface.subklass = ei->interface.subklass; + eInfo.klass = ei->klass; + eInfo.parent = ei->parent; + eInfo.pid = ei->pid; + eInfo.port = ei->port; + eInfo.protocol = ei->protocol; + eInfo.subklass = ei->subklass; + eInfo.vid = ei->vid; + for(uint8_t i = 0; i < eInfo.interface.numep; i++) { + eInfo.interface.epInfo[i].bEndpointAddress = ei->interface.epInfo[i].bEndpointAddress; + eInfo.interface.epInfo[i].bInterval = ei->interface.epInfo[i].bInterval; + eInfo.interface.epInfo[i].bmAttributes = ei->interface.epInfo[i].bmAttributes; + eInfo.interface.epInfo[i].wMaxPacketSize = ei->interface.epInfo[i].wMaxPacketSize; + } + return 0; +} +#endif + +//////////////////////////////////////////////////////////////////////////////// +//////////////////////////////////////////////////////////////////////////////// +//////////////////////////////////////////////////////////////////////////////// + + +#if 0 + +/* TO-DO: Move this silliness to a NONE driver. + * When we have a generic NONE driver we can: + * o Extract ALL device information to help users with a new device. + * o Use an unknown device from a sketch, kind of like usblib does. + * This will aid in making more drivers in a faster way. + */ +uint8_t UHS_USB_HOST_BASE::DefaultAddressing(uint8_t parent, uint8_t port, uint8_t speed) { + uint8_t rcode; + UHS_Device *p0 = NULL, *p = NULL; + + // Get pointer to pseudo device with address 0 assigned + p0 = addrPool.GetUsbDevicePtr(0); + + if(!p0) + return UHS_HOST_ERROR_NO_ADDRESS_IN_POOL; + + if(!p0->epinfo) + return UHS_HOST_ERROR_NULL_EPINFO; + + p0->speed = speed; + + // Allocate new address according to device class + uint8_t bAddress = addrPool.AllocAddress(parent, false, port); + + if(!bAddress) + return UHS_HOST_ERROR_ADDRESS_POOL_FULL; + + p = addrPool.GetUsbDevicePtr(bAddress); + + if(!p) + return UHS_HOST_ERROR_NO_ADDRESS_IN_POOL; + + p->speed = speed; + + // Assign new address to the device + rcode = setAddr(0, bAddress); + + if(rcode) { + addrPool.FreeAddress(bAddress); + bAddress = 0; + return rcode; + } + return 0; +} +#endif + +#else +#error "Never include UHS_host_INLINE.h, include UHS_host.h instead" +#endif diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_macros.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_macros.h new file mode 100644 index 000000000000..afa20f30d4e3 --- /dev/null +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_macros.h @@ -0,0 +1,393 @@ +/* Copyright (C) 2015-2016 Andrew J. Kroll + and +Copyright (C) 2011 Circuits At Home, LTD. All rights reserved. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +Contact information +------------------- + +Circuits At Home, LTD +Web : http://www.circuitsathome.com +e-mail : support@circuitsathome.com + */ + +#if !defined(MACROS_H) +#define MACROS_H +#include "macro_logic.h" +/* + * Universal Arduino(tm) "IDE" fixups. + */ + + +// Just in case... +#ifndef SERIAL_PORT_MONITOR +#define SERIAL_PORT_MONITOR Serial +#endif + +#ifndef INT16_MIN +#define INT16_MIN -32768 +#endif +// require 10607+ +#if defined(ARDUINO) && ARDUINO >=10607 +// nop :-) +#else +#error "Arduino version too old, and must be at least 1.6.7" +#endif + +// Nuke screwed up macro junk from the IDE. +#ifdef __cplusplus +#if defined(true) +#undef true +#endif +#if defined(false) +#undef false +#endif +#endif + + +#if !defined(UHS_DEVICE_WINDOWS_USB_SPEC_VIOLATION_DESCRIPTOR_DEVICE) + +#if !defined(UHS_BIG_FLASH) + +#if defined(FLASHEND) && defined(FLASHSTART) +#if (FLASHEND - FLASHSTART) > 0x0FFFFU +#define UHS_BIG_FLASH 1 +#else +#define UHS_BIG_FLASH 0 +#endif + +#elif defined(__PIC32_FLASH_SIZE) +#if __PIC32_FLASH_SIZE > 511 +#define UHS_BIG_FLASH 1 +#else +#define UHS_BIG_FLASH 0 +#endif + +#elif defined(FLASHEND) && !defined(FLASHSTART) +// Assumes flash starts at 0x00000, is this a safe assumption? +// 192K + should be OK +#if FLASHEND > 0x02FFFFU +#define UHS_BIG_FLASH 1 +#else +#define UHS_BIG_FLASH 0 +#endif + +#elif defined(IFLASH_SIZE) +#if IFLASH_SIZE > 0x0FFFFU +#define UHS_BIG_FLASH 1 +#else +#define UHS_BIG_FLASH 0 +#endif + +#elif defined(ESP8266) +#define UHS_BIG_FLASH 1 +#define SYSTEM_OR_SPECIAL_YIELD(...) yield() + +#elif defined(__arm__) && defined(CORE_TEENSY) +#define UHS_BIG_FLASH 1 + +#elif defined(ARDUINO_spresense_ast) +#define UHS_BIG_FLASH 1 +#else +// safe default +#warning Small flash? +#define UHS_BIG_FLASH 0 +#endif +#endif + +#if UHS_BIG_FLASH +#define UHS_DEVICE_WINDOWS_USB_SPEC_VIOLATION_DESCRIPTOR_DEVICE 1 +#else +#define UHS_DEVICE_WINDOWS_USB_SPEC_VIOLATION_DESCRIPTOR_DEVICE 0 +#endif +#endif + +#if defined(__arm__) && defined(CORE_TEENSY) +#define UHS_PIN_WRITE(p, v) digitalWriteFast(p, v) +#define UHS_PIN_READ(p) digitalReadFast(p) +#endif +// TODO: Fast inline code for AVR and SAM based microcontrollers +// This can be done pretty easily. +// For now, this will just work out-of-the-box. +#if !defined(UHS_PIN_WRITE) +#define UHS_PIN_WRITE(p, v) digitalWrite(p, v) +#endif +#if !defined(UHS_PIN_READ) +#define UHS_PIN_READ(p) digitalRead(p) +#endif + +#if defined( __PIC32MX__ ) && !defined(interrupts) // compiling with Microchip XC32 compiler +#define interrupts() __builtin_enable_interrupts() +#edfine noInterrupts() __builtin_disable_interrupts() +#endif + +#if !defined(ARDUINO_SAMD_ZERO) +#if defined(ARDUINO_AVR_ADK) +#define UHS_GET_DPI(x) (x == 54 ? 6 : digitalPinToInterrupt(x)) +#else +#define UHS_GET_DPI(x) digitalPinToInterrupt(x) +#endif +#else +#define UHS_GET_DPI(x) (x) +#endif + +#ifndef __AVR__ +#ifndef __PGMSPACE_H_ +// This define should prevent reading the system pgmspace.h if included elsewhere +// This is not normally needed. +#define __PGMSPACE_H_ 1 +#endif + +#ifndef PROGMEM +#define PROGMEM +#endif +#ifndef PGM_P +#define PGM_P const char * +#endif +#ifndef PSTR +#define PSTR(str) (str) +#endif +#ifndef F +#define F(str) (str) +#endif +#ifndef _SFR_BYTE +#define _SFR_BYTE(n) (n) +#endif +#ifndef memchr_P +#define memchr_P(str, c, len) memchr((str), (c), (len)) +#endif +#ifndef memcmp_P +#define memcmp_P(a, b, n) memcmp((a), (b), (n)) +#endif +#ifndef memcpy_P +#define memcpy_P(dest, src, num) memcpy((dest), (src), (num)) +#endif +#ifndef memmem_P +#define memmem_P(a, alen, b, blen) memmem((a), (alen), (b), (blen)) +#endif +#ifndef memrchr_P +#define memrchr_P(str, val, len) memrchr((str), (val), (len)) +#endif +#ifndef strcat_P +#define strcat_P(dest, src) strcat((dest), (src)) +#endif +#ifndef strchr_P +#define strchr_P(str, c) strchr((str), (c)) +#endif +#ifndef strchrnul_P +#define strchrnul_P(str, c) strchrnul((str), (c)) +#endif +#ifndef strcmp_P +#define strcmp_P(a, b) strcmp((a), (b)) +#endif +#ifndef strcpy_P +#define strcpy_P(dest, src) strcpy((dest), (src)) +#endif +#ifndef strcasecmp_P +#define strcasecmp_P(a, b) strcasecmp((a), (b)) +#endif +#ifndef strcasestr_P +#define strcasestr_P(a, b) strcasestr((a), (b)) +#endif +#ifndef strlcat_P +#define strlcat_P(dest, src, len) strlcat((dest), (src), (len)) +#endif +#ifndef strlcpy_P +#define strlcpy_P(dest, src, len) strlcpy((dest), (src), (len)) +#endif +#ifndef strlen_P +#define strlen_P(s) strlen((const char *)(s)) +#endif +#ifndef strnlen_P +#define strnlen_P(str, len) strnlen((str), (len)) +#endif +#ifndef strncmp_P +#define strncmp_P(a, b, n) strncmp((a), (b), (n)) +#endif +#ifndef strncasecmp_P +#define strncasecmp_P(a, b, n) strncasecmp((a), (b), (n)) +#endif +#ifndef strncat_P +#define strncat_P(a, b, n) strncat((a), (b), (n)) +#endif +#ifndef strncpy_P +#define strncpy_P(a, b, n) strncmp((a), (b), (n)) +#endif +#ifndef strpbrk_P +#define strpbrk_P(str, chrs) strpbrk((str), (chrs)) +#endif +#ifndef strrchr_P +#define strrchr_P(str, c) strrchr((str), (c)) +#endif +#ifndef strsep_P +#define strsep_P(strp, delim) strsep((strp), (delim)) +#endif +#ifndef strspn_P +#define strspn_P(str, chrs) strspn((str), (chrs)) +#endif +#ifndef strstr_P +#define strstr_P(a, b) strstr((a), (b)) +#endif +#ifndef sprintf_P +#define sprintf_P(s, ...) sprintf((s), __VA_ARGS__) +#endif +#ifndef vfprintf_P +#define vfprintf_P(s, ...) vfprintf((s), __VA_ARGS__) +#endif +#ifndef printf_P +#define printf_P(...) printf(__VA_ARGS__) +#endif +#ifndef snprintf_P +#define snprintf_P(s, n, ...) ((s), (n), __VA_ARGS__) +#endif +#ifndef vsprintf_P +#define vsprintf_P(s, ...) ((s),__VA_ARGS__) +#endif +#ifndef vsnprintf_P +#define vsnprintf_P(s, n, ...) ((s), (n),__VA_ARGS__) +#endif +#ifndef fprintf_P +#define fprintf_P(s, ...) ((s), __VA_ARGS__) +#endif + +#ifndef pgm_read_byte +#define pgm_read_byte(addr) (*(const unsigned char *)(addr)) +#endif +#ifndef pgm_read_word +#define pgm_read_word(addr) (*(const unsigned short *)(addr)) +#endif +#ifndef pgm_read_dword +#define pgm_read_dword(addr) (*(const unsigned long *)(addr)) +#endif +#ifndef pgm_read_float +#define pgm_read_float(addr) (*(const float *)(addr)) +#endif + +#ifndef pgm_read_byte_near +#define pgm_read_byte_near(addr) pgm_read_byte(addr) +#endif +#ifndef pgm_read_word_near +#define pgm_read_word_near(addr) pgm_read_word(addr) +#endif +#ifndef pgm_read_dword_near +#define pgm_read_dword_near(addr) pgm_read_dword(addr) +#endif +#ifndef pgm_read_float_near +#define pgm_read_float_near(addr) pgm_read_float(addr) +#endif +#ifndef pgm_read_byte_far +#define pgm_read_byte_far(addr) pgm_read_byte(addr) +#endif +#ifndef pgm_read_word_far +#define pgm_read_word_far(addr) pgm_read_word(addr) +#endif +#ifndef pgm_read_dword_far +#define pgm_read_dword_far(addr) pgm_read_dword(addr) +#endif +#ifndef pgm_read_float_far +#define pgm_read_float_far(addr) pgm_read_float(addr) +#endif + +#ifndef pgm_read_pointer +#define pgm_read_pointer +#endif + +#endif + + +//////////////////////////////////////////////////////////////////////////////// +// HANDY MACROS +//////////////////////////////////////////////////////////////////////////////// + +// Atmoically set/clear single bits using bitbands. +// Believe it or not, this boils down to a constant, +// and is less code than using |= &= operators. +// Bonus, it makes code easier to read too. +// Bitbanding is a wonderful thing. +#define BITNR(i) (i&0x1?0:i&0x2?1:i&0x4?2:i&0x8?3:i&0x10?4:i&0x20?5:i&0x40?6:i&0x80?7:i&0x100?8:i&0x200?9:i&0x400?10:i&0x800?11:i&0x1000?12:i&0x2000?13:i&0x4000?14:i&0x8000?15:i&0x10000?16:i&0x20000?17:i&0x40000?18:i&0x80000?19:i&0x100000?20:i&0x200000?21:i&0x400000?22:i&0x800000?23:i&0x1000000?24:i&0x2000000?25:i&0x4000000?26:i&0x8000000?27:i&0x10000000?28:i&0x20000000?29:i&0x40000000?30:i&0x80000000?31:32) +#define UHS_KIO_BITBAND_ADDR(r, i) (((uint32_t)&(r) - 0x40000000) * 32 + (i) * 4 + 0x42000000) +#define UHS_KIO_SETBIT_ATOMIC(r, m) (*(uint32_t *)UHS_KIO_BITBAND_ADDR((r), BITNR((m)))) = 1 +#define UHS_KIO_CLRBIT_ATOMIC(r, m) (*(uint32_t *)UHS_KIO_BITBAND_ADDR((r), BITNR((m)))) = 0 + + +#define VALUE_BETWEEN(v,l,h) (((v)>(l)) && ((v)<(h))) +#define VALUE_WITHIN(v,l,h) (((v)>=(l)) && ((v)<=(h))) +#define output_pgm_message(wa,fp,mp,el) wa = &mp, fp((char *)pgm_read_pointer(wa), el) +#define output_if_between(v,l,h,wa,fp,mp,el) if(VALUE_BETWEEN(v,l,h)) output_pgm_message(wa,fp,mp[v-(l+1)],el); + +#define UHS_SWAP_VALUES(a, b) (((a) ^= (b)), ((b) ^= (a)), ((a) ^= (b))) +#ifndef __BYTE_GRABBING_DEFINED__ +#define __BYTE_GRABBING_DEFINED__ 1 +#ifdef BROKEN_OPTIMIZER_LITTLE_ENDIAN +// Note: Use this if your compiler generates horrible assembler! +#define UHS_UINT8_BYTE0(__usi__) (((uint8_t *)&(__usi__))[0]) +#define UHS_UINT8_BYTE1(__usi__) (((uint8_t *)&(__usi__))[1]) +#define UHS_UINT8_BYTE2(__usi__) (((uint8_t *)&(__usi__))[2]) +#define UHS_UINT8_BYTE3(__usi__) (((uint8_t *)&(__usi__))[3]) +#define UHS_UINT8_BYTE4(__usi__) (((uint8_t *)&(__usi__))[4]) +#define UHS_UINT8_BYTE5(__usi__) (((uint8_t *)&(__usi__))[5]) +#define UHS_UINT8_BYTE6(__usi__) (((uint8_t *)&(__usi__))[6]) +#define UHS_UINT8_BYTE7(__usi__) (((uint8_t *)&(__usi__))[7]) +#else +// Note: The cast alone to uint8_t is actually enough. +// GCC throws out the "& 0xff", and the size is no different. +// Some compilers need it. +#define UHS_UINT8_BYTE0(__usi__) ((uint8_t)((__usi__) & 0xff )) +#define UHS_UINT8_BYTE1(__usi__) ((uint8_t)(((__usi__) >> 8) & 0xff)) +#define UHS_UINT8_BYTE2(__usi__) ((uint8_t)(((__usi__) >> 16) & 0xff)) +#define UHS_UINT8_BYTE3(__usi__) ((uint8_t)(((__usi__) >> 24) & 0xff)) +#define UHS_UINT8_BYTE4(__usi__) ((uint8_t)(((__usi__) >> 32) & 0xff)) +#define UHS_UINT8_BYTE5(__usi__) ((uint8_t)(((__usi__) >> 40) & 0xff)) +#define UHS_UINT8_BYTE6(__usi__) ((uint8_t)(((__usi__) >> 48) & 0xff)) +#define UHS_UINT8_BYTE7(__usi__) ((uint8_t)(((__usi__) >> 56) & 0xff)) +#endif +#define UHS_UINT16_SET_BYTE1(__usi__) ((uint16_t)(__usi__) << 8) +#define UHS_UINT32_SET_BYTE1(__usi__) ((uint32_t)(__usi__) << 8) +#define UHS_UINT64_SET_BYTE1(__usi__) ((uint64_t)(__usi__) << 8) +#define UHS_UINT32_SET_BYTE2(__usi__) ((uint32_t)(__usi__) << 16) +#define UHS_UINT64_SET_BYTE2(__usi__) ((uint64_t)(__usi__) << 16) +#define UHS_UINT32_SET_BYTE3(__usi__) ((uint32_t)(__usi__) << 24) +#define UHS_UINT64_SET_BYTE3(__usi__) ((uint64_t)(__usi__) << 24) +#define UHS_UINT64_SET_BYTE4(__usi__) ((uint64_t)(__usi__) << 32) +#define UHS_UINT64_SET_BYTE5(__usi__) ((uint64_t)(__usi__) << 40) +#define UHS_UINT64_SET_BYTE6(__usi__) ((uint64_t)(__usi__) << 48) +#define UHS_UINT64_SET_BYTE7(__usi__) ((uint64_t)(__usi__) << 56) + +// These are the smallest and fastest ways I have found so far in pure C/C++. +#define UHS_BYTES_TO_UINT16(__usc1__,__usc0__) ((uint16_t)((uint16_t)(__usc0__) | (uint16_t)UHS_UINT16_SET_BYTE1(__usc1__))) +#define UHS_BYTES_TO_UINT32(__usc3__,__usc2__,__usc1__,__usc0__) ((uint32_t)((uint32_t)(__usc0__) | UHS_UINT32_SET_BYTE1(__usc1__) | UHS_UINT32_SET_BYTE2(__usc2__) | UHS_UINT32_SET_BYTE3(__usc3__))) +#define UHS_BYTES_TO_UINT64(__usc7__,__usc6__,__usc5__,__usc4__,__usc3__,__usc2__,__usc1__,__usc0__) ((uint64_t)((uint64_t)__usc0__ | UHS_UINT64_SET_BYTE1(__usc1__) | UHS_UINT64_SET_BYTE2(__usc2__) | UHS_UINT64_SET_BYTE3(__usc3__) | UHS_UINT64_SET_BYTE4(__usc4__) | UHS_UINT64_SET_BYTE5(__usc5__) | UHS_UINT64_SET_BYTE6(__usc6__) | UHS_UINT64_SET_BYTE7(__usc7__))) +#endif +/* + * Debug macros. + * Useful when porting from UHS2. + * Do not use these for any new code. + * Change to better debugging after port is completed. + * Strings are stored in progmem (flash) instead of RAM. + */ +#define USBTRACE1(s,l) (Notify(PSTR(s), l)) +#define USBTRACE(s) (USBTRACE1((s), 0x80)); USB_HOST_SERIAL.flush() +#define USBTRACE3(s,r,l) (Notify(PSTR(s), l), D_PrintHex((r), l), Notify(PSTR("\r\n"), l)) +#define USBTRACE3X(s,r,l) (Notify(PSTR(s), l), D_PrintHex((r), l)) +#define USBTRACE2(s,r) (USBTRACE3((s),(r),0x80)); USB_HOST_SERIAL.flush() +#define USBTRACE2X(s,r) (USBTRACE3X((s),(r),0x80)); USB_HOST_SERIAL.flush() + +#define VOID0 ((void)0) +#if !defined(NOTUSED) +#define NOTUSED(...) __VA_ARGS__ __attribute__((unused)) +#endif +#endif /* MACROS_H */ + diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_message.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_message.h new file mode 100644 index 000000000000..93a3de2e0f45 --- /dev/null +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_message.h @@ -0,0 +1,91 @@ +/* Copyright (C) 2015-2016 Andrew J. Kroll + and +Copyright (C) 2011 Circuits At Home, LTD. All rights reserved. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +Contact information +------------------- + +Circuits At Home, LTD +Web : http://www.circuitsathome.com +e-mail : support@circuitsathome.com + */ +#if !defined(_UHS_host_h_) || defined(__MESSAGE_H__) +#error "Never include UHS_message.h directly; include UHS_Usb.h instead" +#else +#define __MESSAGE_H__ + +extern int UsbDEBUGlvl; + +void E_Notify(char const * msg, int lvl); +void E_Notify(uint8_t b, int lvl); +void E_NotifyStr(char const * msg, int lvl); +void E_Notifyc(char c, int lvl); + +#ifdef DEBUG_USB_HOST +#define Notify E_Notify +#define NotifyStr E_NotifyStr +#define Notifyc E_Notifyc +void NotifyFailGetDevDescr(uint8_t reason); +void NotifyFailSetDevTblEntry(uint8_t reason); +void NotifyFailGetConfDescr(uint8_t reason); +void NotifyFailSetConfDescr(uint8_t reason); +void NotifyFailGetDevDescr(void); +void NotifyFailSetDevTblEntry(void); +void NotifyFailGetConfDescr(void); +void NotifyFailSetConfDescr(void); +void NotifyFailUnknownDevice(uint16_t VID, uint16_t PID); +void NotifyFail(uint8_t rcode); +#else +#define Notify(...) VOID0 +#define NotifyStr(...) VOID0 +#define Notifyc(...) VOID0 +#define NotifyFailGetDevDescr(...) VOID0 +#define NotifyFailSetDevTblEntry(...) VOID0 +#define NotifyFailGetConfDescr(...) VOID0 +#define NotifyFailGetDevDescr(...) VOID0 +#define NotifyFailSetDevTblEntry(...) VOID0 +#define NotifyFailGetConfDescr(...) VOID0 +#define NotifyFailSetConfDescr(...) VOID0 +#define NotifyFailUnknownDevice(...) VOID0 +#define NotifyFail(...) VOID0 +#endif + +#ifdef DEBUG_USB_HOST +template void ErrorMessage(uint8_t level, char const * msg, ERROR_TYPE rcode = 0) { + Notify(msg, level); + Notify(PSTR(": "), level); + D_PrintHex (rcode, level); + Notify(PSTR("\r\n"), level); +#else +template void ErrorMessage(NOTUSED(uint8_t level), NOTUSED(char const * msg), ERROR_TYPE rcode = 0) { + (void)rcode; +#endif +} + +#ifdef DEBUG_USB_HOST +template void ErrorMessage(char const * msg, ERROR_TYPE rcode = 0) { + Notify(msg, 0x80); + Notify(PSTR(": "), 0x80); + D_PrintHex (rcode, 0x80); + Notify(PSTR("\r\n"), 0x80); +#else +template void ErrorMessage(NOTUSED(char const * msg), ERROR_TYPE rcode = 0) { + (void)rcode; +#endif +} + +#endif // __MESSAGE_H__ diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_printf_HELPER.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_printf_HELPER.h new file mode 100644 index 000000000000..c5f87739c814 --- /dev/null +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_printf_HELPER.h @@ -0,0 +1,201 @@ +/* Copyright (C) 2015-2016 Andrew J. Kroll + and +Copyright (C) 2011 Circuits At Home, LTD. All rights reserved. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +Contact information +------------------- + +Circuits At Home, LTD +Web : http://www.circuitsathome.com +e-mail : support@circuitsathome.com + */ + +#ifndef UHS_PRINTF_HELPER_H +#define UHS_PRINTF_HELPER_H + +#if defined(LOAD_UHS_PRINTF_HELPER) +#include +#ifdef true +#undef true +#endif +#ifdef false +#undef false +#endif + +#if !defined(STDIO_IS_OK_TO_USE_AS_IS) +#if defined(ARDUINO_SAMD_ZERO) || defined(ARDUINO_SAM_DUE) || defined(ARDUINO_spresense_ast) +// STDIO patching not required. +#define STDIO_IS_OK_TO_USE_AS_IS +#endif +#endif + +#if !defined(STDIO_IS_OK_TO_USE_AS_IS) +// We need to patch STDIO so it can be used. + +#ifndef SERIAL_PORT_MONITOR +// Some don't define this. +#define SERIAL_PORT_MONITOR Serial +#endif + +#ifndef SERIAL_PORT_HARDWARE +// Some don't define this. +#define SERIAL_PORT_HARDWARE SERIAL_PORT_MONITOR +#endif + +#ifndef USB_HOST_SERIAL +#if defined(SERIAL_PORT_USBVIRTUAL) && defined(LOAD_UHS_KINETIS_FS_HOST) +#define USB_HOST_SERIAL SERIAL_PORT_HARDWARE +#else +#define USB_HOST_SERIAL SERIAL_PORT_MONITOR +#endif +#endif + +#if !defined(NOTUSED) +#define NOTUSED(...) __VA_ARGS__ __attribute__((unused)) +#endif + +#ifndef __AVR__ +#ifndef printf_P +#define printf_P(...) printf(__VA_ARGS__) +#endif +#endif + +#if defined(ARDUINO_ARCH_PIC32) +/* + * For printf() output with pic32 Arduino + */ +extern "C" { + + void _mon_putc(char s) { + USB_HOST_SERIAL.write(s); + } + + int _mon_getc() { + while(!USB_HOST_SERIAL.available()); + return USB_HOST_SERIAL.read(); + } +} + +#elif defined(__AVR__) +extern "C" { + + static FILE tty_stdio; + static FILE tty_stderr; + + static int NOTUSED(tty_stderr_putc(char c, NOTUSED(FILE *t))); + static int NOTUSED(tty_stderr_flush(NOTUSED(FILE *t))); + static int NOTUSED(tty_std_putc(char c, NOTUSED(FILE *t))); + static int NOTUSED(tty_std_getc(NOTUSED(FILE *t))); + static int NOTUSED(tty_std_flush(NOTUSED(FILE *t))); + + static int tty_stderr_putc(char c, NOTUSED(FILE *t)) { + USB_HOST_SERIAL.write(c); + return 0; + } + + static int tty_stderr_flush(NOTUSED(FILE *t)) { + USB_HOST_SERIAL.flush(); + return 0; + } + + static int tty_std_putc(char c, NOTUSED(FILE *t)) { + USB_HOST_SERIAL.write(c); + return 0; + } + + static int tty_std_getc(NOTUSED(FILE *t)) { + while(!USB_HOST_SERIAL.available()); + return USB_HOST_SERIAL.read(); + } + + static int tty_std_flush(NOTUSED(FILE *t)) { + USB_HOST_SERIAL.flush(); + return 0; + } +} +#elif defined(CORE_TEENSY) +extern "C" { + + int _write(int fd, const char *ptr, int len) { + int j; + for(j = 0; j < len; j++) { + if(fd == 1) + USB_HOST_SERIAL.write(*ptr++); + else if(fd == 2) + USB_HOST_SERIAL.write(*ptr++); + } + return len; + } + + int _read(int fd, char *ptr, int len) { + if(len > 0 && fd == 0) { + while(!USB_HOST_SERIAL.available()); + *ptr = USB_HOST_SERIAL.read(); + return 1; + } + return 0; + } + +#include + + int _fstat(int fd, struct stat *st) { + memset(st, 0, sizeof (*st)); + st->st_mode = S_IFCHR; + st->st_blksize = 1024; + return 0; + } + + int _isatty(int fd) { + return (fd < 3) ? 1 : 0; + } +} +#else +#error no STDIO +#endif // defined(ARDUINO_ARCH_PIC32) + + + +#if defined(__AVR__) +// The only wierdo in the bunch... +void UHS_AVR_printf_HELPER_init(void) { + // Set up stdio/stderr + tty_stdio.put = tty_std_putc; + tty_stdio.get = tty_std_getc; + tty_stdio.flags = _FDEV_SETUP_RW; + tty_stdio.udata = 0; + + tty_stderr.put = tty_stderr_putc; + tty_stderr.get = NULL; + tty_stderr.flags = _FDEV_SETUP_WRITE; + tty_stderr.udata = 0; + + stdout = &tty_stdio; + stdin = &tty_stdio; + stderr = &tty_stderr; + +} +#define UHS_printf_HELPER_init() UHS_AVR_printf_HELPER_init() +#endif + +#endif /* STDIO_IS_OK_TO_USE_AS_IS */ +#endif /* load.... */ + +#if !defined(UHS_printf_HELPER_init) +#define UHS_printf_HELPER_init() (void(0)) +#endif +#endif /* UHS_PRINTF_HELPER_H */ + diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_printhex.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_printhex.h new file mode 100644 index 000000000000..09e336510771 --- /dev/null +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_printhex.h @@ -0,0 +1,96 @@ +/* Copyright (C) 2015-2016 Andrew J. Kroll + and +Copyright (C) 2011 Circuits At Home, LTD. All rights reserved. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +Contact information +------------------- + +Circuits At Home, LTD +Web : http://www.circuitsathome.com +e-mail : support@circuitsathome.com + */ + +#if !defined(_UHS_host_h_) || defined(__PRINTHEX_H__) +#error "Never include UHS_printhex.h directly; include UHS_Usb.h instead" +#else +#define __PRINTHEX_H__ + +void E_Notifyc(char c, int lvl); + +template +void PrintHex(T val, int lvl) { + int num_nibbles = sizeof (T) * 2; + + do { + char v = 48 + (((val >> (num_nibbles - 1) * 4)) & 0x0f); + if(v > 57) v += 7; + E_Notifyc(v, lvl); + } while(--num_nibbles); +} + +template +void PrintBin(T val, int lvl) { + for(T mask = (((T)1) << ((sizeof (T) << 3) - 1)); mask; mask >>= 1) + if(val & mask) + E_Notifyc('1', lvl); + else + E_Notifyc('0', lvl); +} + +template +void SerialPrintHex(T val) { + int num_nibbles = sizeof (T) * 2; + + do { + char v = 48 + (((val >> (num_nibbles - 1) * 4)) & 0x0f); + if(v > 57) v += 7; + USB_HOST_SERIAL.print(v); + } while(--num_nibbles); +} + +template +void PrintHex2(Print *prn, T val) { + T mask = (((T)1) << (((sizeof (T) << 1) - 1) << 2)); + + while(mask > 1) { + if(val < mask) + prn->print("0"); + + mask >>= 4; + } + prn->print((T)val, HEX); +} + +#ifdef DEBUG_USB_HOST +template void D_PrintHex(T val, int lvl) { + PrintHex (val, lvl); +#else +template void D_PrintHex(NOTUSED(T val), NOTUSED(int lvl)) { +#endif +} + +#ifdef DEBUG_USB_HOST +template void D_PrintBin(T val, int lvl) { + PrintBin (val, lvl); +#else +template void D_PrintBin(NOTUSED(T val), NOTUSED(int lvl)) { +#endif +} + + + +#endif // __PRINTHEX_H__ diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_settings.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_settings.h new file mode 100644 index 000000000000..a401c2851647 --- /dev/null +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_settings.h @@ -0,0 +1,141 @@ +/* Copyright (C) 2015-2016 Andrew J. Kroll + and +Copyright (C) 2011 Circuits At Home, LTD. All rights reserved. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +Contact information +------------------- + +Circuits At Home, LTD +Web : http://www.circuitsathome.com +e-mail : support@circuitsathome.com + */ + +#ifndef UHS_SETTINGS_H +#define UHS_SETTINGS_H + +// TO-DO: Move specific settings to modules which use them. + +//////////////////////////////////////////////////////////////////////////////// +// Define any of these options at the top of your sketch to override +// the defaults contained herewith. Do NOT do modifications here. +// Individual Components have their own settings. +// +// Macro | Settings and notes | Default +// -----------------------------+-----------------------+----------------------- +// | Any class that does | +// USB_HOST_SERIAL | text streaming | SERIAL_PORT_MONITOR +// | e.g. Serial2 | +// -----------------------------+-----------------------+----------------------- +// ENABLE_UHS_DEBUGGING | 0 = off, 1 = on | 0 +// -----------------------------+-----------------------+----------------------- +// | 0 = off, 1 = on | +// | Caution! Can make | +// DEBUG_PRINTF_EXTRA_HUGE | program too large! | 0 +// | Other modules depend | +// | on this setting. | +// -----------------------------+-----------------------+----------------------- +// USE_UHS_BLACK_WIDDOW | 0 = no, 1 = yes | 0 +// -----------------------------+-----------------------+----------------------- +// ENABLE_WII_IR_CAMERA | 0 = no, 1 = yes | 0 +// -----------------------------^-----------------------^----------------------- +// +//////////////////////////////////////////////////////////////////////////////// + + +//////////////////////////////////////////////////////////////////////////////// +// DEBUGGING +//////////////////////////////////////////////////////////////////////////////// + +#ifndef USB_HOST_SERIAL +#if defined(SERIAL_PORT_USBVIRTUAL) && defined(LOAD_UHS_KINETIS_FS_HOST) +#define USB_HOST_SERIAL SERIAL_PORT_HARDWARE +#else +#define USB_HOST_SERIAL SERIAL_PORT_MONITOR +#endif +#endif + +#ifndef ENABLE_UHS_DEBUGGING +#define ENABLE_UHS_DEBUGGING 0 +#endif + +#ifndef DEBUG_PRINTF_EXTRA_HUGE +#define DEBUG_PRINTF_EXTRA_HUGE 0 +#endif + +//////////////////////////////////////////////////////////////////////////////// +// Manual board activation +//////////////////////////////////////////////////////////////////////////////// + +/* Set this to 1 if you are using a Black Widdow */ +#ifndef USE_UHS_BLACK_WIDDOW +#define USE_UHS_BLACK_WIDDOW 0 +#endif + +//////////////////////////////////////////////////////////////////////////////// +// Wii IR camera +//////////////////////////////////////////////////////////////////////////////// + +/* Set this to 1 to activate code for the Wii IR camera */ +#ifndef ENABLE_WII_IR_CAMERA +#define ENABLE_WII_IR_CAMERA 0 +#endif + +//////////////////////////////////////////////////////////////////////////////// +// Set to 1 to use the faster spi4teensy3 driver. (not used yet)) +//////////////////////////////////////////////////////////////////////////////// +#ifndef USE_SPI4TEENSY3 +#define USE_SPI4TEENSY3 0 +#endif + +//////////////////////////////////////////////////////////////////////////////// +// AUTOMATIC Settings +//////////////////////////////////////////////////////////////////////////////// + +// No user serviceable parts below this line. +// DO NOT change anything below here unless you are a developer! + +#if defined(__GNUC__) && defined(__AVR__) +#ifndef GCC_VERSION +#define GCC_VERSION (__GNUC__ * 10000 + __GNUC_MINOR__ * 100 + __GNUC_PATCHLEVEL__) +#endif +#if GCC_VERSION < 40602 // Test for GCC < 4.6.2 +#ifdef PROGMEM +#undef PROGMEM +#define PROGMEM __attribute__((section(".progmem.data"))) // Workaround for http://gcc.gnu.org/bugzilla/show_bug.cgi?id=34734#c4 +#ifdef PSTR +#undef PSTR +#define PSTR(s) (__extension__({static const char __c[] PROGMEM = (s); &__c[0];})) // Copied from pgmspace.h in avr-libc source +#endif +#endif +#endif +#endif + +#if !defined(DEBUG_USB_HOST) && ENABLE_UHS_DEBUGGING +#define DEBUG_USB_HOST +#endif + +#if !defined(WIICAMERA) && ENABLE_WII_IR_CAMERA +#define WIICAMERA +#endif + +#define UHS_SLEEP_MS(v) pUsb->sof_delay(v) + +#ifndef UHS_NI +#define UHS_NI __attribute__((noinline)) +#endif + +#endif /* SETTINGS_H */ diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_usb_ch9.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_usb_ch9.h new file mode 100644 index 000000000000..34b8ad72e7ef --- /dev/null +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_usb_ch9.h @@ -0,0 +1,222 @@ +/* Copyright (C) 2015-2016 Andrew J. Kroll + and +Copyright (C) 2011 Circuits At Home, LTD. All rights reserved. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +Contact information +------------------- + +Circuits At Home, LTD +Web : http://www.circuitsathome.com +e-mail : support@circuitsathome.com + */ + +#if !defined(_UHS_host_h_) || defined(_UHS_ch9_h_) +#error "Never include UHS_usb_ch9.h directly; include UHS_Usb.h instead" +#else + +/* USB chapter 9 structures */ +#define _UHS_ch9_h_ + +/* Misc.USB constants */ +#define DEV_DESCR_LEN 18 //device descriptor length +#define CONF_DESCR_LEN 9 //configuration descriptor length +#define INTR_DESCR_LEN 9 //interface descriptor length +#define EP_DESCR_LEN 7 //endpoint descriptor length + +/* Standard Device Requests */ +#define USB_REQUEST_GET_STATUS 0 // Standard Device Request - GET STATUS +#define USB_REQUEST_CLEAR_FEATURE 1 // Standard Device Request - CLEAR FEATURE +#define USB_REQUEST_SET_FEATURE 3 // Standard Device Request - SET FEATURE +#define USB_REQUEST_SET_ADDRESS 5 // Standard Device Request - SET ADDRESS +#define USB_REQUEST_GET_DESCRIPTOR 6 // Standard Device Request - GET DESCRIPTOR +#define USB_REQUEST_SET_DESCRIPTOR 7 // Standard Device Request - SET DESCRIPTOR +#define USB_REQUEST_GET_CONFIGURATION 8 // Standard Device Request - GET CONFIGURATION +#define USB_REQUEST_SET_CONFIGURATION 9 // Standard Device Request - SET CONFIGURATION +#define USB_REQUEST_GET_INTERFACE 10 // Standard Device Request - GET INTERFACE +#define USB_REQUEST_SET_INTERFACE 11 // Standard Device Request - SET INTERFACE +#define USB_REQUEST_SYNCH_FRAME 12 // Standard Device Request - SYNCH FRAME + +/* Wireless USB Device Requests */ +#define USB_REQ_SET_ENCRYPTION 0x0D +#define USB_REQ_GET_ENCRYPTION 0x0E +#define USB_REQ_RPIPE_ABORT 0x0E +#define USB_REQ_SET_HANDSHAKE 0x0F +#define USB_REQ_RPIPE_RESET 0x0F +#define USB_REQ_GET_HANDSHAKE 0x10 +#define USB_REQ_SET_CONNECTION 0x11 +#define USB_REQ_SET_SECURITY_DATA 0x12 +#define USB_REQ_GET_SECURITY_DATA 0x13 +#define USB_REQ_SET_WUSB_DATA 0x14 +#define USB_REQ_LOOPBACK_DATA_WRITE 0x15 +#define USB_REQ_LOOPBACK_DATA_READ 0x16 +#define USB_REQ_SET_INTERFACE_DS 0x17 + +/* USB feature flags */ +#define USB_DEVICE_SELF_POWERED 0 /* (read only) */ +#define USB_DEVICE_REMOTE_WAKEUP 1 /* dev may initiate wakeup */ +#define USB_DEVICE_TEST_MODE 2 /* (wired high speed only) */ +#define USB_DEVICE_BATTERY 2 /* (wireless) */ +#define USB_DEVICE_B_HNP_ENABLE 3 /* (otg) dev may initiate HNP */ +#define USB_DEVICE_WUSB_DEVICE 3 /* (wireless)*/ +#define USB_DEVICE_A_HNP_SUPPORT 4 /* (otg) RH port supports HNP */ +#define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */ +#define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */ + +#define USB_FEATURE_ENDPOINT_HALT 0 // CLEAR/SET FEATURE - Endpoint Halt +#define USB_FEATURE_DEVICE_REMOTE_WAKEUP 1 // CLEAR/SET FEATURE - Device remote wake-up +#define USB_FEATURE_TEST_MODE 2 // CLEAR/SET FEATURE - Test mode +/* OTG SET FEATURE Constants */ +#define OTG_FEATURE_B_HNP_ENABLE 3 // SET FEATURE OTG - Enable B device to perform HNP +#define OTG_FEATURE_A_HNP_SUPPORT 4 // SET FEATURE OTG - A device supports HNP +#define OTG_FEATURE_A_ALT_HNP_SUPPORT 5 // SET FEATURE OTG - Another port on the A device supports HNP + +/* Setup Data Constants */ +#define USB_SETUP_HOST_TO_DEVICE 0x00 // Device Request bmRequestType transfer direction - host to device transfer +#define USB_SETUP_DEVICE_TO_HOST 0x80 // Device Request bmRequestType transfer direction - device to host transfer +#define USB_SETUP_TYPE_STANDARD 0x00 // Device Request bmRequestType type - standard +#define USB_SETUP_TYPE_CLASS 0x20 // Device Request bmRequestType type - class +#define USB_SETUP_TYPE_VENDOR 0x40 // Device Request bmRequestType type - vendor +#define USB_SETUP_RECIPIENT_DEVICE 0x00 // Device Request bmRequestType recipient - device +#define USB_SETUP_RECIPIENT_INTERFACE 0x01 // Device Request bmRequestType recipient - interface +#define USB_SETUP_RECIPIENT_ENDPOINT 0x02 // Device Request bmRequestType recipient - endpoint +#define USB_SETUP_RECIPIENT_OTHER 0x03 // Device Request bmRequestType recipient - other +#define USB_SETUP_RECIPIENT_PORT 0x04 // Wireless USB 1.0 +#define USB_SETUP_RECIPIENT_RPIPE 0x05 // Wireless USB 1.0 + + +/* USB descriptors */ +#define USB_DESCRIPTOR_DEVICE 0x01 // bDescriptorType for a Device Descriptor. +#define USB_DESCRIPTOR_CONFIGURATION 0x02 // bDescriptorType for a Configuration Descriptor. +#define USB_DESCRIPTOR_STRING 0x03 // bDescriptorType for a String Descriptor. +#define USB_DESCRIPTOR_INTERFACE 0x04 // bDescriptorType for an Interface Descriptor. +#define USB_DESCRIPTOR_ENDPOINT 0x05 // bDescriptorType for an Endpoint Descriptor. +#define USB_DESCRIPTOR_DEVICE_QUALIFIER 0x06 // bDescriptorType for a Device Qualifier. +#define USB_DESCRIPTOR_OTHER_SPEED 0x07 // bDescriptorType for a Other Speed Configuration. +#define USB_DESCRIPTOR_INTERFACE_POWER 0x08 // bDescriptorType for Interface Power. +#define USB_DESCRIPTOR_OTG 0x09 // bDescriptorType for an OTG Descriptor. +#define USB_DESCRIPTOR_DEBUG 0x0a +#define USB_DESCRIPTOR_INTERFACE_ASSOCIATION 0x0b +#define USB_DESCRIPTOR_SECURITY 0x0c +#define USB_DESCRIPTOR_KEY 0x0d +#define USB_DESCRIPTOR_ENCRYPTION_TYPE 0x0e +#define USB_DESCRIPTOR_BOS 0x0f +#define USB_DESCRIPTOR_DEVICE_CAPABILITY 0x10 +#define USB_DESCRIPTOR_WIRELESS_ENDPOINT_COMP 0x11 +#define USB_DESCRIPTOR_WIRE_ADAPTER 0x21 +#define USB_DESCRIPTOR_RPIPE 0x22 +#define USB_DESCRIPTOR_CS_RADIO_CONTROL 0x23 +#define USB_DESCRIPTOR_SS_ENDPOINT_COMP 0x30 + +#define USB_HID_DESCRIPTOR 0x21 + + +// Conventional codes for class-specific descriptors. "Common Class" Spec (3.11) +#define USB_DESCRIPTOR_CS_DEVICE 0x21 +#define USB_DESCRIPTOR_CS_CONFIG 0x22 +#define USB_DESCRIPTOR_CS_STRING 0x23 +#define USB_DESCRIPTOR_CS_INTERFACE 0x24 +#define USB_DESCRIPTOR_CS_ENDPOINT 0x25 + + + +/* USB Endpoint Transfer Types */ +#define USB_TRANSFER_TYPE_CONTROL 0x00 // Endpoint is a control endpoint. +#define USB_TRANSFER_TYPE_ISOCHRONOUS 0x01 // Endpoint is an isochronous endpoint. +#define USB_TRANSFER_TYPE_BULK 0x02 // Endpoint is a bulk endpoint. +#define USB_TRANSFER_TYPE_INTERRUPT 0x03 // Endpoint is an interrupt endpoint. +#define bmUSB_TRANSFER_TYPE 0x03 // bit mask to separate transfer type from ISO attributes +#define USB_TRANSFER_DIRECTION_IN 0x80 // Indicate direction is IN + +/* Standard Feature Selectors for CLEAR_FEATURE Requests */ +#define USB_FEATURE_ENDPOINT_STALL 0 // Endpoint recipient +#define USB_FEATURE_DEVICE_REMOTE_WAKEUP 1 // Device recipient +#define USB_FEATURE_TEST_MODE 2 // Device recipient + +/* descriptor data structures */ + +/* Device descriptor structure */ +typedef struct { + uint8_t bLength; // Length of this descriptor. + uint8_t bDescriptorType; // DEVICE descriptor type (USB_DESCRIPTOR_DEVICE). + uint16_t bcdUSB; // USB Spec Release Number (BCD). + uint8_t bDeviceClass; // Class code (assigned by the USB-IF). 0xFF-Vendor specific. + uint8_t bDeviceSubClass; // Subclass code (assigned by the USB-IF). + uint8_t bDeviceProtocol; // Protocol code (assigned by the USB-IF). 0xFF-Vendor specific. + uint8_t bMaxPacketSize0; // Maximum packet size for endpoint 0. + uint16_t idVendor; // Vendor ID (assigned by the USB-IF). + uint16_t idProduct; // Product ID (assigned by the manufacturer). + uint16_t bcdDevice; // Device release number (BCD). + uint8_t iManufacturer; // Index of String Descriptor describing the manufacturer. + uint8_t iProduct; // Index of String Descriptor describing the product. + uint8_t iSerialNumber; // Index of String Descriptor with the device's serial number. + uint8_t bNumConfigurations; // Number of possible configurations. +} __attribute__((packed)) USB_DEVICE_DESCRIPTOR; + +/* Configuration descriptor structure */ +typedef struct { + uint8_t bLength; // Length of this descriptor. + uint8_t bDescriptorType; // CONFIGURATION descriptor type (USB_DESCRIPTOR_CONFIGURATION). + uint16_t wTotalLength; // Total length of all descriptors for this configuration. + uint8_t bNumInterfaces; // Number of interfaces in this configuration. + uint8_t bConfigurationValue; // Value of this configuration (1 based). + uint8_t iConfiguration; // Index of String Descriptor describing the configuration. + uint8_t bmAttributes; // Configuration characteristics. + uint8_t bMaxPower; // Maximum power consumed by this configuration. +} __attribute__((packed)) USB_CONFIGURATION_DESCRIPTOR; + +/* Interface descriptor structure */ +typedef struct { + uint8_t bLength; // Length of this descriptor. + uint8_t bDescriptorType; // INTERFACE descriptor type (USB_DESCRIPTOR_INTERFACE). + uint8_t bInterfaceNumber; // Number of this interface (0 based). + uint8_t bAlternateSetting; // Value of this alternate interface setting. + uint8_t bNumEndpoints; // Number of endpoints in this interface. + uint8_t bInterfaceClass; // Class code (assigned by the USB-IF). 0xFF-Vendor specific. + uint8_t bInterfaceSubClass; // Subclass code (assigned by the USB-IF). + uint8_t bInterfaceProtocol; // Protocol code (assigned by the USB-IF). 0xFF-Vendor specific. + uint8_t iInterface; // Index of String Descriptor describing the interface. +} __attribute__((packed)) USB_INTERFACE_DESCRIPTOR; + +/* Endpoint descriptor structure */ +typedef struct { + uint8_t bLength; // Length of this descriptor. + uint8_t bDescriptorType; // ENDPOINT descriptor type (USB_DESCRIPTOR_ENDPOINT). + uint8_t bEndpointAddress; // Endpoint address. Bit 7 indicates direction (0=OUT, 1=IN). + uint8_t bmAttributes; // Endpoint transfer type. + uint16_t wMaxPacketSize; // Maximum packet size. + uint8_t bInterval; // Polling interval in frames. +} __attribute__((packed)) USB_ENDPOINT_DESCRIPTOR; + +/* HID descriptor */ +/* +typedef struct { + uint8_t bLength; + uint8_t bDescriptorType; + uint16_t bcdHID; // HID class specification release + uint8_t bCountryCode; + uint8_t bNumDescriptors; // Number of additional class specific descriptors + uint8_t bDescrType; // Type of class descriptor + uint16_t wDescriptorLength; // Total size of the Report descriptor +} __attribute__((packed)) USB_HID_DESCRIPTOR; +*/ + +typedef struct { + uint8_t bDescrType; // Type of class descriptor + uint16_t wDescriptorLength; // Total size of the Report descriptor +} __attribute__((packed)) HID_CLASS_DESCRIPTOR_LEN_AND_TYPE; + +#endif // _ch9_h_ diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_usbhost.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_usbhost.h new file mode 100644 index 000000000000..6db65c00a0ec --- /dev/null +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_usbhost.h @@ -0,0 +1,452 @@ +/* Copyright (C) 2015-2016 Andrew J. Kroll + and +Copyright (C) 2011 Circuits At Home, LTD. All rights reserved. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +Contact information +------------------- + +Circuits At Home, LTD +Web : http://www.circuitsathome.com +e-mail : support@circuitsathome.com + */ + +#if !defined(_UHS_host_h_) +#error "Never include UHS_usbhost.h directly; include UHS_host.h instead" +#else +#if !defined(_USBHOST_H_) +#define _USBHOST_H_ + +// Very early prototypes +#if defined(UHS_LOAD_BT) +void UHS_BT_SetUSBInterface(UHS_USB_HOST_BASE *host, ENUMERATION_INFO *ei); +void UHS_BT_ScanUninitialized(UHS_USB_HOST_BASE *host); +void UHS_BT_Poll(UHS_USB_HOST_BASE *host); +#endif +#if defined(UHS_LOAD_HID) +void UHS_HID_SetUSBInterface(UHS_USB_HOST_BASE *host, ENUMERATION_INFO *ei); +void UHS_HID_ScanUninitialized(UHS_USB_HOST_BASE *host); +void UHS_HID_Poll(UHS_USB_HOST_BASE *host); +#endif + +//#if defined(LOAD_UHS_CDC_ACM) || defined(LOAD_UHS_CDC_ACM_FTDI) || defined(LOAD_UHS_CDC_ACM_PROLIFIC) || defined(LOAD_UHS_CDC_ACM_XR21B1411) +//void UHS_CDC_ACM_SetUSBInterface(UHS_USB_HOST_BASE *host, ENUMERATION_INFO *ei); +//void UHS_CDC_ACM_ScanUninitialized(UHS_USB_HOST_BASE *host); +//void UHS_CDC_ACM_Poll(UHS_USB_HOST_BASE *host); +//#endif + +class UHS_USBInterface; // forward class declaration + +// enumerator to turn the VBUS on/off + +typedef enum { + vbus_on = 0, + vbus_off = 1 +} VBUS_t; + +// All host SEI use this base class + +class UHS_USB_HOST_BASE { +public: + AddressPool addrPool; + UHS_USBInterface* devConfig[UHS_HOST_MAX_INTERFACE_DRIVERS]; + volatile uint8_t usb_error; + volatile uint8_t usb_task_state; + volatile uint8_t usb_task_polling_disabled; + volatile uint8_t usb_host_speed; + volatile uint8_t hub_present; + + UHS_USB_HOST_BASE(void) { + for(uint16_t i = 0; i < UHS_HOST_MAX_INTERFACE_DRIVERS; i++) { + devConfig[i] = NULL; + } + usb_task_polling_disabled = 0; + usb_task_state = UHS_USB_HOST_STATE_INITIALIZE; //set up state machine + usb_host_speed = 0; + usb_error = 0; + }; + + ///////////////////////////////////////////// + // + // Virtual methods that interface to the SIE + // Overriding each is mandatory. + // + ///////////////////////////////////////////// + + /** + * Delay for x milliseconds + * Override if your controller provides an SOF IRQ, which may involve + * some sort of reentrant ISR or workaround with interrupts enabled. + * + * @param x how many milliseconds to delay + * @return true if delay completed without a state change, false if delay aborted + */ + virtual bool UHS_NI sof_delay(uint16_t x) { + if(!(usb_task_state & UHS_USB_HOST_STATE_MASK)) return false; + uint8_t current_state = usb_task_state; + while(current_state == usb_task_state && x--) { + delay(1); + } + return (current_state == usb_task_state); + }; + + virtual UHS_EpInfo * UHS_NI ctrlReqOpen(NOTUSED(uint8_t addr), NOTUSED(uint64_t Request), NOTUSED(uint8_t* dataptr)) { + return NULL; + }; + + virtual void UHS_NI vbusPower(NOTUSED(VBUS_t state)) { + }; + + virtual void UHS_NI Task(void) { + }; + + virtual uint8_t UHS_NI SetAddress(NOTUSED(uint8_t addr), NOTUSED(uint8_t ep), NOTUSED(UHS_EpInfo **ppep), NOTUSED(uint16_t &nak_limit)) { + return UHS_HOST_ERROR_NOT_IMPLEMENTED; + }; + + virtual uint8_t UHS_NI OutTransfer(NOTUSED(UHS_EpInfo *pep), NOTUSED(uint16_t nak_limit), NOTUSED(uint16_t nbytes), NOTUSED(uint8_t *data)) { + return UHS_HOST_ERROR_NOT_IMPLEMENTED; + }; + + virtual uint8_t UHS_NI InTransfer(NOTUSED(UHS_EpInfo *pep), NOTUSED(uint16_t nak_limit), NOTUSED(uint16_t *nbytesptr), NOTUSED(uint8_t *data)) { + return UHS_HOST_ERROR_NOT_IMPLEMENTED; + }; + + virtual uint8_t UHS_NI ctrlReqClose(NOTUSED(UHS_EpInfo *pep), NOTUSED(uint8_t bmReqType), NOTUSED(uint16_t left), NOTUSED(uint16_t nbytes), NOTUSED(uint8_t *dataptr)) { + return UHS_HOST_ERROR_NOT_IMPLEMENTED; + }; + + virtual uint8_t UHS_NI ctrlReqRead(NOTUSED(UHS_EpInfo *pep), NOTUSED(uint16_t *left), NOTUSED(uint16_t *read), NOTUSED(uint16_t nbytes), NOTUSED(uint8_t *dataptr)) { + return UHS_HOST_ERROR_NOT_IMPLEMENTED; + }; + + virtual uint8_t UHS_NI dispatchPkt(NOTUSED(uint8_t token), NOTUSED(uint8_t ep), NOTUSED(uint16_t nak_limit)) { + return UHS_HOST_ERROR_NOT_IMPLEMENTED; + }; + + virtual uint8_t UHS_NI init(void) { + return 0; + }; + + virtual void UHS_NI doHostReset(void) { + }; + + virtual int16_t UHS_NI Init(NOTUSED(int16_t mseconds)) { + return -1; + }; + + virtual int16_t UHS_NI Init(void) { + return Init(INT16_MIN); + }; + + virtual uint8_t hwlPowerUp(void) { + /* This is for machine specific support to enable/power up the USB HW to operate*/ + return UHS_HOST_ERROR_NOT_IMPLEMENTED; + }; + + virtual uint8_t hwPowerDown(void) { + /* This is for machine specific support to disable/powerdown the USB Hw */ + return UHS_HOST_ERROR_NOT_IMPLEMENTED; + }; + + virtual bool IsHub(uint8_t klass) { + return (klass == UHS_USB_CLASS_HUB); + }; + + virtual void UHS_NI suspend_host(void) { + // Used on MCU that lack control of IRQ priority (AVR). + // Suspends ISRs, for critical code. IRQ will be serviced after it is resumed. + // NOTE: you must track the state yourself! + }; + + virtual void UHS_NI resume_host(void) { + // Used on MCU that lack control of IRQ priority (AVR). + // Resumes ISRs. + // NOTE: you must track the state yourself! + }; + + ///////////////////////////////////////////// + // + // Built-ins, No need to override + // + ///////////////////////////////////////////// + // these two probably will go away, and won't be used, TBD + inline void Poll_Others(void) { +#if defined(UHS_LOAD_BT) + UHS_BT_Poll(this); +#endif +#if defined(UHS_LOAD_HID) + UHS_HID_Poll(this); +#endif + } + + inline void DisablePoll(void) { + noInterrupts(); + usb_task_polling_disabled++; + DDSB(); + interrupts(); + } + + inline void EnablePoll(void) { + noInterrupts(); + usb_task_polling_disabled--; + DDSB(); + interrupts(); + } + + uint8_t UHS_NI seekInterface(ENUMERATION_INFO *ei, uint16_t inf, USB_CONFIGURATION_DESCRIPTOR *ucd); + + uint8_t UHS_NI setEpInfoEntry(uint8_t addr, uint8_t iface, uint8_t epcount, volatile UHS_EpInfo* eprecord_ptr); + + uint8_t UHS_NI EPClearHalt(uint8_t addr, uint8_t ep); + + uint8_t UHS_NI ctrlReq(uint8_t addr, uint64_t Request, uint16_t nbytes, uint8_t* dataptr); + + uint8_t UHS_NI getDevDescr(uint8_t addr, uint16_t nbytes, uint8_t* dataptr); + + uint8_t UHS_NI getConfDescr(uint8_t addr, uint16_t nbytes, uint8_t conf, uint8_t* dataptr); + + uint8_t UHS_NI setAddr(uint8_t oldaddr, uint8_t newaddr); + + uint8_t UHS_NI setConf(uint8_t addr, uint8_t conf_value); + + uint8_t UHS_NI getStrDescr(uint8_t addr, uint16_t nbytes, uint8_t index, uint16_t langid, uint8_t* dataptr); + + void UHS_NI ReleaseDevice(uint8_t addr); + + uint8_t UHS_NI Configuring(uint8_t parent, uint8_t port, uint8_t speed); + + void UHS_NI DeviceDefaults(uint8_t maxep, UHS_USBInterface *device); + + UHS_EpInfo* UHS_NI getEpInfoEntry(uint8_t addr, uint8_t ep); + + inline uint8_t getUsbTaskState(void) { + return ( usb_task_state); + }; + + inline AddressPool* GetAddressPool(void) { + return &addrPool; + }; + + int UHS_NI RegisterDeviceClass(UHS_USBInterface *pdev) { + for(uint8_t i = 0; i < UHS_HOST_MAX_INTERFACE_DRIVERS; i++) { + if(!devConfig[i]) { + devConfig[i] = pdev; + return i; + } + } + //return UHS_HOST_ERROR_CANT_REGISTER_DEVICE_CLASS; + return -1; + }; +#if 0 + + inline void ForEachUsbDevice(UsbDeviceHandleFunc pfunc) { + addrPool.ForEachUsbDevice(pfunc); + }; +#endif + + uint8_t TestInterface(ENUMERATION_INFO *ei); + uint8_t enumerateInterface(ENUMERATION_INFO *ei); + uint8_t getNextInterface(ENUMERATION_INFO *ei, UHS_EpInfo *pep, uint8_t data[], uint16_t *left, uint16_t *read, uint8_t *offset); + uint8_t initDescrStream(ENUMERATION_INFO *ei, USB_CONFIGURATION_DESCRIPTOR *ucd, UHS_EpInfo *pep, uint8_t *data, uint16_t *left, uint16_t *read, uint8_t *offset); + uint8_t outTransfer(uint8_t addr, uint8_t ep, uint16_t nbytes, uint8_t* data); + uint8_t inTransfer(uint8_t addr, uint8_t ep, uint16_t *nbytesptr, uint8_t* data); + uint8_t doSoftReset(uint8_t parent, uint8_t port, uint8_t address); + uint8_t getone(UHS_EpInfo *pep, uint16_t *left, uint16_t *read, uint8_t *dataptr, uint8_t *offset); + uint8_t eat(UHS_EpInfo *pep, uint16_t *left, uint16_t *read, uint8_t *dataptr, uint8_t *offset, uint16_t *yum); + +}; + +// All device interface drivers use this subclass + +class UHS_USBInterface { +public: + + UHS_USB_HOST_BASE *pUsb; // Parent USB host + volatile uint8_t bNumEP; // total number of EP in this interface + volatile UHS_EpInfo epInfo[16]; // This is a stub, override in the driver. + + volatile uint8_t bAddress; // address of the device + volatile uint8_t bConfNum; // configuration number + volatile uint8_t bIface; // interface value + volatile bool bPollEnable; // poll enable flag, operating status + volatile uint32_t qNextPollTime; // next poll time + + /** + * Resets interface driver to unused state. You should override this in + * your driver if it requires extra class variable cleanup. + */ + virtual void DriverDefaults(void) { + printf("Default driver defaults.\r\n"); + pUsb->DeviceDefaults(bNumEP, this); + }; + + /** + * Checks if this interface is supported. + * Executed called when new devices are connected. + * + * @param ei + * @return true if the interface is supported + */ + virtual bool OKtoEnumerate(NOTUSED(ENUMERATION_INFO *ei)) { + return false; + }; + + /** + * Configures any needed endpoint information for an interface. + * You must provide this in your driver. + * Executed when new devices are connected and OKtoEnumerate() + * returned true. + * + * @param ei + * @return zero on success + */ + virtual uint8_t SetInterface(NOTUSED(ENUMERATION_INFO *ei)) { + return UHS_HOST_ERROR_NOT_IMPLEMENTED; + }; + + /** + * Interface specific additional setup and enumeration that + * can't occur when the descriptor stream is open. + * Also used for collection of unclaimed interfaces, to link to the master. + * + * @return zero on success + */ + virtual uint8_t Finalize(void) { + return 0; + }; + + /** + * Executed after interface is finalized but, before polling has started. + * + * @return 0 on success + */ + virtual uint8_t OnStart(void) { + return 0; + }; + + /** + * Start interface polling + * @return + */ + virtual uint8_t Start(void) { + uint8_t rcode = OnStart(); + if(!rcode) bPollEnable = true; + return rcode; + }; + + /** + * Executed before anything else in Release(). + * + */ + virtual void OnRelease(void) { + return; + }; + + /** + * Release resources when device is disconnected. + * Normally this does not need to be overridden. + */ + virtual void Release(void) { + OnRelease(); + DriverDefaults(); + return; + }; + + /** + * Executed After driver polls. + * Can be used when there is an important change detected during polling + * and you want to handle it elsewhere. + * Examples: + * Media status change for bulk, e.g. ready, not-ready, media changed, door opened. + * Button state/joystick position/etc changes on a HID device. + * Flow control status change on a communication device, e.g. CTS on serial + */ + virtual void OnPoll(void) { + return; + }; + + /** + * Poll interface driver. You should override this in your driver if you + * require polling faster or slower than every 100 milliseconds, or your + * driver requires special housekeeping. + */ + virtual void Poll() { + OnPoll(); + qNextPollTime = millis() + 100; + }; + + virtual bool UHS_NI Polling(void) { + return bPollEnable; + } + + /** + * This is only for a hub. + * @param port + */ + virtual void ResetHubPort(NOTUSED(uint8_t port)) { + return; + }; + +#if 0 + /** + * + * @return true if this interface is Vendor Specific. + */ + virtual bool IsVSI() { + return false; + } +#endif +}; + +#if 0 +/** + * + * Vendor Specific interface class. + * This is used by a partner interface. + * It can also be used to force-enumerate an interface that + * can use this interface directly. + * You can also add an instance of this class within the interface constructor + * if you expect the interface. + * + * If this is not needed, it may be removed. Nothing I have written needs this. + * Let me know if it is not required, then IsVSI method can also be shit-canned. + * -- AJK + */ + +class UHS_VSI : public UHS_USBInterface { +public: + volatile UHS_EpInfo epInfo[1]; + volatile ENUMERATION_INFO eInfo; + UHS_VSI(UHS_USB_HOST_BASE *p); + bool OKtoEnumerate(ENUMERATION_INFO *ei); + uint8_t SetInterface(ENUMERATION_INFO *ei); + virtual void DriverDefaults(void); + virtual void Release(void); + + uint8_t GetAddress(void) { + return bAddress; + }; + + virtual bool IsVSI() { + return true; + } + +}; +#endif + +#endif //_USBHOST_H_ +#endif diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_util_INLINE.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_util_INLINE.h new file mode 100644 index 000000000000..04cfb61430f4 --- /dev/null +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_util_INLINE.h @@ -0,0 +1,129 @@ +/* Copyright (C) 2015-2016 Andrew J. Kroll + and +Copyright (C) 2011 Circuits At Home, LTD. All rights reserved. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +Contact information +------------------- + +Circuits At Home, LTD +Web : http://www.circuitsathome.com +e-mail : support@circuitsathome.com + */ + +#if defined(LOAD_USB_HOST_SYSTEM) && !defined(USB_HOST_SYSTEM_UTIL_LOADED) +#define USB_HOST_SYSTEM_UTIL_LOADED + +// 0x80 is the default (i.e. trace) to turn off set this global to something lower. +// this allows for 126 other debugging levels. +// TO-DO: Allow assignment to a different serial port by software +int UsbDEBUGlvl = 0x80; + +void E_Notifyc(char c, int lvl) { + if(UsbDEBUGlvl < lvl) return; +#if defined(ARDUINO) && ARDUINO >=100 + USB_HOST_SERIAL.print(c); +#else + USB_HOST_SERIAL.print(c, BYTE); +#endif + //USB_HOST_SERIAL.flush(); +} + +void E_Notify(char const * msg, int lvl) { + if(UsbDEBUGlvl < lvl) return; + if(!msg) return; + char c; + + while((c = pgm_read_byte(msg++))) E_Notifyc(c, lvl); +} + +void E_NotifyStr(char const * msg, int lvl) { + if(UsbDEBUGlvl < lvl) return; + if(!msg) return; + char c; + + while((c = *msg++)) E_Notifyc(c, lvl); +} + +void E_Notify(uint8_t b, int lvl) { + if(UsbDEBUGlvl < lvl) return; +#if defined(ARDUINO) && ARDUINO >=100 + USB_HOST_SERIAL.print(b); +#else + USB_HOST_SERIAL.print(b, DEC); +#endif +} + +void E_Notify(double d, int lvl) { + if(UsbDEBUGlvl < lvl) return; + USB_HOST_SERIAL.print(d); +} + +#ifdef DEBUG_USB_HOST + +void NotifyFailGetDevDescr(void) { + Notify(PSTR("\r\ngetDevDescr "), 0x80); +} + +void NotifyFailSetDevTblEntry(void) { + Notify(PSTR("\r\nsetDevTblEn "), 0x80); +} + +void NotifyFailGetConfDescr(void) { + Notify(PSTR("\r\ngetConf "), 0x80); +} + +void NotifyFailSetConfDescr(void) { + Notify(PSTR("\r\nsetConf "), 0x80); +} + +void NotifyFailGetDevDescr(uint8_t reason) { + NotifyFailGetDevDescr(); + NotifyFail(reason); +} + +void NotifyFailSetDevTblEntry(uint8_t reason) { + NotifyFailSetDevTblEntry(); + NotifyFail(reason); + +} + +void NotifyFailGetConfDescr(uint8_t reason) { + NotifyFailGetConfDescr(); + NotifyFail(reason); +} + +void NotifyFailSetConfDescr(uint8_t reason) { + NotifyFailSetConfDescr(); + NotifyFail(reason); +} + +void NotifyFailUnknownDevice(uint16_t VID, uint16_t PID) { + Notify(PSTR("\r\nUnknown Device Connected - VID: "), 0x80); + D_PrintHex (VID, 0x80); + Notify(PSTR(" PID: "), 0x80); + D_PrintHex (PID, 0x80); +} + +void NotifyFail(uint8_t rcode) { + D_PrintHex (rcode, 0x80); + Notify(PSTR("\r\n"), 0x80); +} +#endif + +#else +#error "Never include UHS_util_INLINE.h, include UHS_host.h instead" +#endif diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/USB_HOST_SHIELD/UHS_max3421e.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/USB_HOST_SHIELD/UHS_max3421e.h new file mode 100644 index 000000000000..f42a806d7038 --- /dev/null +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/USB_HOST_SHIELD/UHS_max3421e.h @@ -0,0 +1,226 @@ +/* Copyright (C) 2015-2016 Andrew J. Kroll + and +Copyright (C) 2011 Circuits At Home, LTD. All rights reserved. + +This software may be distributed and modified under the terms of the GNU +General Public License version 2 (GPL2) as published by the Free Software +Foundation and appearing in the file GPL2.TXT included in the packaging of +this file. Please note that GPL2 Section 2[b] requires that all works based +on this software must also be made publicly available under the terms of +the GPL2 ("Copyleft"). + +Contact information +------------------- + +Circuits At Home, LTD +Web : http://www.circuitsathome.com +e-mail : support@circuitsathome.com + */ +#if !defined(USB_HOST_SHIELD_H) || defined(_max3421e_h_) +#error "Never include UHS_max3421e.h directly; include USB_HOST_SHIELD.h instead" +#else + +#define _max3421e_h_ + +/* MAX3421E register/bit names and bitmasks */ + +#define SE0 0 +#define SE1 1 +#define FSHOST 2 +#define LSHOST 3 + +/* MAX3421E command byte format: rrrrr0wa where 'r' is register number */ + +// +// MAX3421E Registers in HOST mode. +// +#define rRCVFIFO 0x08 // Receive FIFO Register +#define rSNDFIFO 0x10 // Send FIFO Register +#define rSUDFIFO 0x20 // Set Up Data FIFO Register +#define rRCVBC 0x30 // Receive FIFO Byte Count Register +#define rSNDBC 0x38 // Send FIFO Byte Count Register + +// USB Interrupt Request Status (USBIRQ) +#define rUSBIRQ 0x68 // USB Interrupt Request Register +#define bmVBUSIRQ 0x40 // Vbus Present Interrupt Request +#define bmNOVBUSIRQ 0x20 // Vbus Absent Interrupt Request +#define bmOSCOKIRQ 0x01 // Oscillator OK Interrupt Request + +// USB Interrupt Request Control (USBIEN) +#define rUSBIEN 0x70 // USB Interrupt Request Enable Register +#define bmVBUSIE bmVBUSIRQ // Vbus Present Interrupt Request Enable +#define bmNOVBUSIE bmNOVBUSIRQ // Vbus Absent Interrupt Request Enable +#define bmOSCOKIE bmOSCOKIRQ // Oscillator OK Interrupt Request Enable + +// (USBCTL) +#define rUSBCTL 0x78 //15<<3 +#define bmCHIPRES 0x20 //b5 +#define bmPWRDOWN 0x10 //b4 + +// (CPUCTL) +#define rCPUCTL 0x80 //16<<3 +#define bmPUSLEWID1 0x80 //b7 +#define bmPULSEWID0 0x40 //b6 +#define bmIE 0x01 //b0 + +// bmPUSLEWID1 bmPULSEWID0 Pulse width +// 0 0 10.6uS +// 0 1 5.3uS +// 1 0 2.6uS +// 1 1 1.3uS +#define PUSLEWIDTH10_6 (0) +#define PUSLEWIDTH5_3 (bmPULSEWID0) +#define PUSLEWIDTH2_6 (bmPUSLEWID1) +#define PUSLEWIDTH1_3 (bmPULSEWID0 | bmPUSLEWID1) + +// (PINCTL) +#define rPINCTL 0x88 //17<<3 +#define bmFDUPSPI 0x10 //b4 +#define bmINTLEVEL 0x08 //b3 +#define bmPOSINT 0x04 //b2 +#define bmGPXB 0x02 //b1 +#define bmGPXA 0x01 //b0 + +// GPX pin selections +#define GPX_OPERATE 0x00 // +#define GPX_VBDET 0x01 // +#define GPX_BUSACT 0x02 // +#define GPX_SOF 0x03 // + +#define rREVISION 0x90 //18<<3 + +// (IOPINS1) +#define rIOPINS1 0xa0 //20<<3 +#define bmGPOUT0 0x01 // +#define bmGPOUT1 0x02 // +#define bmGPOUT2 0x04 // +#define bmGPOUT3 0x08 // +#define bmGPIN0 0x10 // +#define bmGPIN1 0x20 // +#define bmGPIN2 0x40 // +#define bmGPIN3 0x80 // + +// (IOPINS2) +#define rIOPINS2 0xa8 //21<<3 +#define bmGPOUT4 0x01 // +#define bmGPOUT5 0x02 // +#define bmGPOUT6 0x04 // +#define bmGPOUT7 0x08 // +#define bmGPIN4 0x10 // +#define bmGPIN5 0x20 // +#define bmGPIN6 0x40 // +#define bmGPIN7 0x80 // + +// (GPINIRQ) +#define rGPINIRQ 0xb0 //22<<3 +#define bmGPINIRQ0 0x01 // +#define bmGPINIRQ1 0x02 // +#define bmGPINIRQ2 0x04 // +#define bmGPINIRQ3 0x08 // +#define bmGPINIRQ4 0x10 // +#define bmGPINIRQ5 0x20 // +#define bmGPINIRQ6 0x40 // +#define bmGPINIRQ7 0x80 // + +// (GPINIEN) +#define rGPINIEN 0xb8 //23<<3 +#define bmGPINIEN0 0x01 // +#define bmGPINIEN1 0x02 // +#define bmGPINIEN2 0x04 // +#define bmGPINIEN3 0x08 // +#define bmGPINIEN4 0x10 // +#define bmGPINIEN5 0x20 // +#define bmGPINIEN6 0x40 // +#define bmGPINIEN7 0x80 // + +// (GPINPOL) +#define rGPINPOL 0xc0 //24<<3 +#define bmGPINPOL0 0x01 // +#define bmGPINPOL1 0x02 // +#define bmGPINPOL2 0x04 // +#define bmGPINPOL3 0x08 // +#define bmGPINPOL4 0x10 // +#define bmGPINPOL5 0x20 // +#define bmGPINPOL6 0x40 // +#define bmGPINPOL7 0x80 // + +// +// If any data transfer errors occur, the HXFRDNIRQ asserts, while the RCVDAVIRQ does not. +// +// The CPU clears the SNDBAVIRQ by writing the SNDBC register. +// The CPU should never directly clear the SNDBAVIRQ bit. + +// Host Interrupt Request Status (HIRQ) +#define rHIRQ 0xc8 // Host Interrupt Request Register +#define bmBUSEVENTIRQ 0x01 // BUS Reset Done or BUS Resume Interrupt Request +#define bmRWUIRQ 0x02 // Remote Wakeup Interrupt Request +#define bmRCVDAVIRQ 0x04 // Receive FIFO Data Available Interrupt Request +#define bmSNDBAVIRQ 0x08 // Send Buffer Available Interrupt Request +#define bmSUSDNIRQ 0x10 // Suspend operation Done Interrupt Request +#define bmCONDETIRQ 0x20 // Peripheral Connect/Disconnect Interrupt Request +#define bmFRAMEIRQ 0x40 // Frame Generator Interrupt Request +#define bmHXFRDNIRQ 0x80 // Host Transfer Done Interrupt Request + +// IRQs that are OK for the CPU to clear +#define ICLRALLBITS (bmBUSEVENTIRQ | bmRWUIRQ | bmRCVDAVIRQ | bmSUSDNIRQ | bmCONDETIRQ | bmFRAMEIRQ | bmHXFRDNIRQ) + +// Host Interrupt Request Control (HIEN) +#define rHIEN 0xd0 // +#define bmBUSEVENTIE bmBUSEVENTIRQ // BUS Reset Done or BUS Resume Interrupt Request Enable +#define bmRWUIE bmRWUIRQ // Remote Wakeup Interrupt Request Enable +#define bmRCVDAVIE bmRCVDAVIRQ // Receive FIFO Data Available Interrupt Request Enable +#define bmSNDBAVIE bmSNDBAVIRQ // Send Buffer Available Interrupt Request Enable +#define bmSUSDNIE bmSUSDNIRQ // Suspend operation Done Interrupt Request Enable +#define bmCONDETIE bmCONDETIRQ // Peripheral Connect/Disconnect Interrupt Request Enable +#define bmFRAMEIE bmFRAMEIRQ // Frame Generator Interrupt Request Enable +#define bmHXFRDNIE bmHXFRDNIRQ // Host Transfer Done Interrupt Request Enable + +// (MODE)) +#define rMODE 0xd8 //27<<3 +#define bmHOST 0x01 // +#define bmLOWSPEED 0x02 // +#define bmHUBPRE 0x04 // +#define bmSOFKAENAB 0x08 // +#define bmSEPIRQ 0x10 // +#define bmDELAYISO 0x20 // +#define bmDMPULLDN 0x40 // +#define bmDPPULLDN 0x80 // + +#define rPERADDR 0xe0 //28<<3 + +// (HCTL) +#define rHCTL 0xe8 //29<<3 +#define bmBUSRST 0x01 // +#define bmFRMRST 0x02 // +#define bmSAMPLEBUS 0x04 // +#define bmSIGRSM 0x08 // +#define bmRCVTOG0 0x10 // +#define bmRCVTOG1 0x20 // +#define bmSNDTOG0 0x40 // +#define bmSNDTOG1 0x80 // + +// Host transfer (HXFR) +#define rHXFR 0xf0 //30<<3 +/* Host transfer token values for writing the HXFR register (R30) */ +/* OR this bit field with the endpoint number in bits 3:0 */ +#define MAX3421E_tokSETUP 0x10 // HS=0, ISO=0, OUTNIN=0, SETUP=1 +#define MAX3421E_tokIN 0x00 // HS=0, ISO=0, OUTNIN=0, SETUP=0 +#define MAX3421E_tokOUT 0x20 // HS=0, ISO=0, OUTNIN=1, SETUP=0 +#define MAX3421E_tokINHS 0x80 // HS=1, ISO=0, OUTNIN=0, SETUP=0 +#define MAX3421E_tokOUTHS 0xA0 // HS=1, ISO=0, OUTNIN=1, SETUP=0 +#define MAX3421E_tokISOIN 0x40 // HS=0, ISO=1, OUTNIN=0, SETUP=0 +#define MAX3421E_tokISOOUT 0x60 // HS=0, ISO=1, OUTNIN=1, SETUP=0 + +// (HRSL) +#define rHRSL 0xf8 //31<<3 +#define bmRCVTOGRD 0x10 // +#define bmSNDTOGRD 0x20 // +#define bmKSTATUS 0x40 // +#define bmJSTATUS 0x80 // +#define bmSE0 0x00 //SE0 - disconnect state +#define bmSE1 0xc0 //SE1 - illegal state + +#define MODE_FS_HOST (bmDPPULLDN|bmDMPULLDN|bmHOST|bmSOFKAENAB) +#define MODE_LS_HOST (bmDPPULLDN|bmDMPULLDN|bmHOST|bmLOWSPEED|bmSOFKAENAB) + +#endif //_max3421e_h_ diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/USB_HOST_SHIELD/USB_HOST_SHIELD.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/USB_HOST_SHIELD/USB_HOST_SHIELD.h new file mode 100644 index 000000000000..ab80f6541735 --- /dev/null +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/USB_HOST_SHIELD/USB_HOST_SHIELD.h @@ -0,0 +1,519 @@ +/* Copyright (C) 2015-2016 Andrew J. Kroll + and +Copyright (C) 2011 Circuits At Home, LTD. All rights reserved. + +This software may be distributed and modified under the terms of the GNU +General Public License version 2 (GPL2) as published by the Free Software +Foundation and appearing in the file GPL2.TXT included in the packaging of +this file. Please note that GPL2 Section 2[b] requires that all works based +on this software must also be made publicly available under the terms of +the GPL2 ("Copyleft"). + +Contact information +------------------- + +Circuits At Home, LTD +Web : http://www.circuitsathome.com +e-mail : support@circuitsathome.com + */ + +#ifndef USB_HOST_SHIELD_H +#define USB_HOST_SHIELD_H + +// uncomment to get 'printf' console debugging. NOT FOR UNO! +//#define DEBUG_PRINTF_EXTRA_HUGE_USB_HOST_SHIELD + +#ifdef LOAD_USB_HOST_SHIELD +#include "UHS_max3421e.h" +#include + + +#if !defined(SPI_HAS_TRANSACTION) +#error "Your SPI library installation is too old." +#else +#if !defined(SPI_ATOMIC_VERSION) +#warning "Your SPI library installation lacks 'SPI_ATOMIC_VERSION'. Please complain to the maintainer." +#elif SPI_ATOMIC_VERSION < 1 +#error "Your SPI library installation is too old." +#endif + +#endif +#if DEBUG_PRINTF_EXTRA_HUGE +#ifdef DEBUG_PRINTF_EXTRA_HUGE_USB_HOST_SHIELD +#define MAX_HOST_DEBUG(...) printf_P(__VA_ARGS__) +#else +#define MAX_HOST_DEBUG(...) VOID0 +#endif +#else +#define MAX_HOST_DEBUG(...) VOID0 +#endif + +#if !defined(USB_HOST_SHIELD_USE_ISR) +#if defined(USE_MULTIPLE_APP_API) +#define USB_HOST_SHIELD_USE_ISR 0 +#else +#define USB_HOST_SHIELD_USE_ISR 1 +#endif +#else +#define USB_HOST_SHIELD_USE_ISR 1 +#endif + + + +#if !USB_HOST_SHIELD_USE_ISR +#error NOISR Polled mode _NOT SUPPORTED YET_ + +// +// Polled defaults +// +#if defined(BOARD_BLACK_WIDDOW) +#define UHS_MAX3421E_SS_ 6 +#define UHS_MAX3421E_INT_ 3 +#elif defined(CORE_TEENSY) && (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)) +#if EXT_RAM +// Teensy++ 2.0 with XMEM2 +#define UHS_MAX3421E_SS_ 20 +#define UHS_MAX3421E_INT_ 7 +#else +#define UHS_MAX3421E_SS_ 9 +#define UHS_MAX3421E_INT_ 8 +#endif +#define UHS_MAX3421E_SPD +#elif defined(ARDUINO_AVR_ADK) +#define UHS_MAX3421E_SS_ 53 +#define UHS_MAX3421E_INT_ 54 +#elif defined(ARDUINO_AVR_BALANDUINO) +#define UHS_MAX3421E_SS_ 20 +#define UHS_MAX3421E_INT_ 19 +#else +#define UHS_MAX3421E_SS_ 10 +#define UHS_MAX3421E_INT_ 9 +#endif + +#else +#if defined(ARDUINO_ARCH_PIC32) +// PIC32 only allows edge interrupts, isn't that lovely? We'll emulate it... +#if CHANGE < 2 +#error core too old. +#endif + +#define IRQ_IS_EDGE 0 +#ifndef digitalPinToInterrupt +// great, this isn't implemented. +#warning digitalPinToInterrupt is not defined, complain here https://github.com/chipKIT32/chipKIT-core/issues/114 +#if defined(_BOARD_UNO_) || defined(_BOARD_UC32_) +#define digitalPinToInterrupt(p) ((p) == 2 ? 1 : ((p) == 7 ? 2 : ((p) == 8 ? 3 : ((p) == 35 ? 4 : ((p) == 38 ? 0 : NOT_AN_INTERRUPT))))) +#warning digitalPinToInterrupt is now defined until this is taken care of. +#else +#error digitalPinToInterrupt not defined for your board, complain here https://github.com/chipKIT32/chipKIT-core/issues/114 +#endif +#endif +#else +#define IRQ_IS_EDGE 0 +#endif + +// More stupidity from our friends @ Sony... +#if defined(ARDUINO_spresense_ast) +#if !defined(NOT_AN_INTERRUPT) +#define NOT_AN_INTERRUPT -1 +#endif +#endif + +// SAMD uses an enum for this instead of a define. Isn't that just dandy? +#if !defined(NOT_AN_INTERRUPT) && !defined(ARDUINO_ARCH_SAMD) +#warning NOT_AN_INTERRUPT not defined, possible problems ahead. +#warning If NOT_AN_INTERRUPT is an enum or something else, complain to UHS30 developers on github. +#warning Otherwise complain to your board core developer/maintainer. +#define NOT_AN_INTERRUPT -1 +#endif + +// +// Interrupt defaults. Int0 or Int1 +// +#ifdef BOARD_BLACK_WIDDOW +#error "HELP! Please send us an email, I don't know the values for Int0 and Int1 on the Black Widow board!" +#elif defined(ARDUINO_AVR_ADK) +#define UHS_MAX3421E_SS_ 53 +#define UHS_MAX3421E_INT_ 54 +#elif defined(ARDUINO_spresense_ast) +#define UHS_MAX3421E_SS_ 21 +#define UHS_MAX3421E_INT_ 20 +#define SPIclass SPI5 +//#define UHS_MAX3421E_SPD 100000 +#elif defined(CORE_TEENSY) && (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)) + +// TO-DO! + +#if EXT_RAM +// Teensy++ 2.0 with XMEM2 +#define UHS_MAX3421E_SS_ 20 +#define UHS_MAX3421E_INT_ 7 +#else +#define UHS_MAX3421E_SS_ 9 +#define UHS_MAX3421E_INT_ 8 +#endif + +#elif defined(ARDUINO_AVR_BALANDUINO) +#error "ISR mode is currently not supported on the Balanduino. Please set USB_HOST_SHIELD_USE_ISR to 0." +#else +#define UHS_MAX3421E_SS_ 10 +#ifdef __AVR__ +#if defined(__AVR_ATmega32U4__) +#define INT_FOR_PIN2 1 +#define INT_FOR_PIN3 0 +#else +// Everybody else??? +#define INT_FOR_PIN2 0 +#define INT_FOR_PIN3 1 +#endif +#define UHS_MAX3421E_INT_ 3 +#else +// Non-avr +#if defined(ARDUINO_ARCH_PIC32) +// UNO32 External Interrupts: +// Pin 38 (INT0), Pin 2 (INT1), Pin 7 (INT2), Pin 8 (INT3), Pin 35 (INT4) +#define UHS_MAX3421E_INT_ 7 +#else +#define UHS_MAX3421E_INT_ 9 +#endif +#endif +#endif +#endif + + + +#if defined(NO_AUTO_SPEED) +// Ugly details section... +// MAX3421E characteristics +// SPI Serial - Clock Input. An external SPI master supplies SCLK with frequencies up to 26MHz. The +// logic level is referenced to the voltage on VL. Data is clocked into the SPI slave inter face on the +// rising edge of SCLK. Data is clocked out of the SPI slave interface on the falling edge of SCLK. +// Serial Clock (SCLK) Period 38.4ns minimum. 17ns minimum pulse width. VL >2.5V +// SCLK Fall to MISO Propagation Delay 14.2ns +// SCLK Fall to MOSI Propagation Delay 14.2ns +// SCLK Fall to MOSI Drive 3.5ns +// Theoretical deadline for reply 17.7ns +// 26MHz 38.4615ns period <-- MAX3421E theoretical maximum + +#if !defined(UHS_MAX3421E_SPD) +#if defined(ARDUINO_SAMD_ZERO) +// Zero violates spec early, needs a long setup time, or doesn't like high latency. +#define UHS_MAX3421E_SPD 10000000 +#elif defined(ARDUINO_ARCH_PIC32) +// PIC MX 5/6/7 characteristics +// 25MHZ 40ns period <-- PIC MX 5/6/7 theoretical maximum +// pulse width minimum Tsclk/2ns +// Trise/fall 10ns maximum. 5ns is typical but not guaranteed. +// Tsetup minimum for MISO 10ns. +// We are in violation by 7.7ns @ 25MHz due to latency alone. +// Even reading at end of data cycle, we only have a 2.3ns window. +// This is too narrow to to compensate for capacitance, trace lengths, and noise. + +// 17.7ns + 10ns = 27.7ns +// 18MHz fits and has enough slack time to compensate for capacitance, trace lengths, and noise. +// For high speeds the SMP bit is recommended too, which samples at the end instead of the middle. +// 20Mhz seems to work. + +#define UHS_MAX3421E_SPD 20000000 +#else +#define UHS_MAX3421E_SPD 25000000 +#endif +#endif +#else +// We start at 25MHz, and back down until hardware can take it. +// Of course, SPI library can adjust this for us too. +// Why not 26MHz? Because I have not found any MCU board that +// can actually go that fast without problems. +// Could be a shield limitation too. +#if !defined(UHS_MAX3421E_SPD) +#define UHS_MAX3421E_SPD 25000000 +#endif +#endif + +#ifndef UHS_MAX3421E_INT +#define UHS_MAX3421E_INT UHS_MAX3421E_INT_ +#endif + +#ifndef UHS_MAX3421E_SS +#define UHS_MAX3421E_SS UHS_MAX3421E_SS_ +#endif + +// NOTE: On the max3421e the irq enable and irq bits are in the same position. + +// IRQs used if CPU polls +#define ENIBITSPOLLED (bmCONDETIE | bmBUSEVENTIE | bmFRAMEIE) +// IRQs used if CPU is interrupted +#define ENIBITSISR (bmCONDETIE | bmBUSEVENTIE | bmFRAMEIE /* | bmRCVDAVIRQ | bmSNDBAVIRQ | bmHXFRDNIRQ */ ) + +#if !USB_HOST_SHIELD_USE_ISR +#define IRQ_CHECK_MASK (ENIBITSPOLLED & ICLRALLBITS) +#define IRQ_IS_EDGE 0 +#else +#define IRQ_CHECK_MASK (ENIBITSISR & ICLRALLBITS) +#endif + +#if IRQ_IS_EDGE +// Note: UNO32 Interrupts can only be RISING, or FALLING. +// This poses an interesting problem, since we want to use a LOW level. +// The MAX3421E provides for pulse width control for an IRQ. +// We do need to watch the timing on this, as a second IRQ could cause +// a missed IRQ, since we read the level of the line to check if the IRQ +// is actually for this chip. The only other alternative is to add a capacitor +// and an NPN transistor, and use two lines. We can try this first, though. +// Worse case, we can ignore reading the pin for verification on UNO32. +// Too bad there is no minimum low width setting. +// +// Single Clear First Second Clear first Clear last +// IRQ Single IRQ IRQ Second active pending IRQ +// | | | | | | +// V V V V V V +// _____ _________ _ _ _______ +// |______| |______| |______| |______________| +// +#define IRQ_SENSE FALLING +#if defined(ARDUINO_ARCH_PIC32) +//#define bmPULSEWIDTH PUSLEWIDTH10_6 +#define bmPULSEWIDTH 0 +#define bmIRQ_SENSE 0 +#else +#define bmPULSEWIDTH PUSLEWIDTH1_3 +#define bmIRQ_SENSE 0 +#endif +#else +#if !defined(IRQ_SENSE) +#define IRQ_SENSE LOW +#endif +#if !defined(bmPULSEWIDTH) +#define bmPULSEWIDTH 0 +#endif +#if !defined(bmIRQ_SENSE) +#define bmIRQ_SENSE bmINTLEVEL +#endif +#endif + +class MAX3421E_HOST : +public UHS_USB_HOST_BASE +#if defined(SWI_IRQ_NUM) +, public dyn_SWI +#endif +{ + // TO-DO: move these into the parent class. + volatile uint8_t vbusState; + volatile uint16_t sof_countdown; + + // TO-DO: pack into a struct/union and use one byte + volatile bool busevent; + volatile bool sofevent; + volatile bool counted; + volatile bool condet; + volatile bool doingreset; + + #ifdef USB_HOST_MANUAL_POLL + volatile bool frame_irq_enabled = false; + + bool enable_frame_irq(bool enable) { + const bool prev_state = frame_irq_enabled; + if(prev_state != enable) { + if(enable) + regWr(rHIEN, regRd(rHIEN) | bmFRAMEIE); + else + regWr(rHIEN, regRd(rHIEN) & ~bmFRAMEIE); + frame_irq_enabled = enable; + } + return prev_state; + } + #endif + +public: + SPISettings MAX3421E_SPI_Settings; + uint8_t ss_pin; + uint8_t irq_pin; + // Will use the defaults UHS_MAX3421E_SS, UHS_MAX3421E_INT and speed + + UHS_NI MAX3421E_HOST(void) { + sof_countdown = 0; + busevent = false; + doingreset = false; + sofevent = false; + condet = false; + ss_pin = UHS_MAX3421E_SS; + irq_pin = UHS_MAX3421E_INT; + MAX3421E_SPI_Settings = SPISettings(UHS_MAX3421E_SPD, MSBFIRST, SPI_MODE0); + hub_present = 0; + }; + + // Will use user supplied pins, and UHS_MAX3421E_SPD + + UHS_NI MAX3421E_HOST(uint8_t pss, uint8_t pirq) { + sof_countdown = 0; + busevent = false; + doingreset = false; + sofevent = false; + condet = false; + ss_pin = pss; + irq_pin = pirq; + MAX3421E_SPI_Settings = SPISettings(UHS_MAX3421E_SPD, MSBFIRST, SPI_MODE0); + hub_present = 0; + }; + + // Will use user supplied pins, and speed + + UHS_NI MAX3421E_HOST(uint8_t pss, uint8_t pirq, uint32_t pspd) { + sof_countdown = 0; + doingreset = false; + busevent = false; + sofevent = false; + condet = false; + ss_pin = pss; + irq_pin = pirq; + MAX3421E_SPI_Settings = SPISettings(pspd, MSBFIRST, SPI_MODE0); + hub_present = 0; + }; + + virtual bool UHS_NI sof_delay(uint16_t x) { +#ifdef USB_HOST_MANUAL_POLL + const bool saved_irq_state = enable_frame_irq(true); +#endif + sof_countdown = x; + while((sof_countdown != 0) && !condet) { + SYSTEM_OR_SPECIAL_YIELD(); +#if !USB_HOST_SHIELD_USE_ISR + Task(); +#endif + } +#ifdef USB_HOST_MANUAL_POLL + enable_frame_irq(saved_irq_state); +#endif + // Serial.println("...Wake"); + return (!condet); + }; + + virtual UHS_EpInfo *ctrlReqOpen(uint8_t addr, uint64_t Request, uint8_t* dataptr); + + virtual void UHS_NI vbusPower(VBUS_t state) { + regWr(rPINCTL, (bmFDUPSPI | bmIRQ_SENSE) | (uint8_t)(state)); + }; + + void UHS_NI Task(void); + + virtual uint8_t SetAddress(uint8_t addr, uint8_t ep, UHS_EpInfo **ppep, uint16_t &nak_limit); + virtual uint8_t OutTransfer(UHS_EpInfo *pep, uint16_t nak_limit, uint16_t nbytes, uint8_t *data); + virtual uint8_t InTransfer(UHS_EpInfo *pep, uint16_t nak_limit, uint16_t *nbytesptr, uint8_t *data); + virtual uint8_t ctrlReqClose(UHS_EpInfo *pep, uint8_t bmReqType, uint16_t left, uint16_t nbytes, uint8_t *dataptr); + virtual uint8_t ctrlReqRead(UHS_EpInfo *pep, uint16_t *left, uint16_t *read, uint16_t nbytes, uint8_t *dataptr); + virtual uint8_t dispatchPkt(uint8_t token, uint8_t ep, uint16_t nak_limit); + + void UHS_NI ReleaseChildren(void) { + for(uint8_t i = 0; i < UHS_HOST_MAX_INTERFACE_DRIVERS; i++) + if(devConfig[i]) + devConfig[i]->Release(); + hub_present = 0; + }; + + virtual bool IsHub(uint8_t klass) { + if(klass == UHS_USB_CLASS_HUB) { + hub_present = bmHUBPRE; + return true; + } + return false; + }; + + virtual void VBUS_changed(void); + + virtual void UHS_NI doHostReset(void) { +#if USB_HOST_SHIELD_USE_ISR + // Enable interrupts + noInterrupts(); +#endif + doingreset = true; + busevent = true; + regWr(rHIRQ, bmBUSEVENTIRQ); // see data sheet. + regWr(rHCTL, bmBUSRST); //issue bus reset +#if USB_HOST_SHIELD_USE_ISR + DDSB(); + // Enable interrupts + interrupts(); +#endif + while(busevent) { + DDSB(); + SYSTEM_OR_SPECIAL_YIELD(); + } +#endif +#if USB_HOST_SHIELD_USE_ISR + // Enable interrupts + noInterrupts(); +#endif + #ifdef USB_HOST_MANUAL_POLL + enable_frame_irq(true); + #endif + sofevent = true; +#if USB_HOST_SHIELD_USE_ISR + DDSB(); + // Enable interrupts + interrupts(); +#endif + // Wait for SOF + while(sofevent) { + } +#if USB_HOST_SHIELD_USE_ISR + // Enable interrupts + noInterrupts(); +#endif + doingreset = false; +#if USB_HOST_SHIELD_USE_ISR + DDSB(); + // Enable interrupts + interrupts(); + }; + + + int16_t UHS_NI Init(int16_t mseconds); + + int16_t UHS_NI Init(void) { + return Init(INT16_MIN); + }; + + void ISRTask(void); + void ISRbottom(void); + void busprobe(void); + uint16_t reset(void); + + // MAX3421e specific + void regWr(uint8_t reg, uint8_t data); + void gpioWr(uint8_t data); + uint8_t regRd(uint8_t reg); + uint8_t gpioRd(void); + uint8_t* bytesWr(uint8_t reg, uint8_t nbytes, uint8_t* data_p); + uint8_t* bytesRd(uint8_t reg, uint8_t nbytes, uint8_t* data_p); + + // ARM/NVIC specific, used to emulate reentrant ISR. +#if defined(SWI_IRQ_NUM) + + void dyn_SWISR(void) { + ISRbottom(); + }; +#endif + + virtual void UHS_NI suspend_host(void) { + // Used on MCU that lack control of IRQ priority (AVR). + // Suspends ISRs, for critical code. IRQ will be serviced after it is resumed. + // NOTE: you must track the state yourself! +#if defined(__AVR__) + noInterrupts(); + detachInterrupt(UHS_GET_DPI(irq_pin)); + interrupts(); +#endif + }; + + virtual void UHS_NI resume_host(void); +}; +#if !defined(SPIclass) +#define SPIclass SPI +#endif +#if !defined(USB_HOST_SHIELD_LOADED) +#include "USB_HOST_SHIELD_INLINE.h" +#endif +#else +#error "define LOAD_USB_HOST_SHIELD in your sketch, never include USB_HOST_SHIELD.h in a driver." +#endif +#endif /* USB_HOST_SHIELD_H */ diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/USB_HOST_SHIELD/USB_HOST_SHIELD_INLINE.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/USB_HOST_SHIELD/USB_HOST_SHIELD_INLINE.h new file mode 100644 index 000000000000..78669305d989 --- /dev/null +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/USB_HOST_SHIELD/USB_HOST_SHIELD_INLINE.h @@ -0,0 +1,1003 @@ +/* Copyright (C) 2015-2016 Andrew J. Kroll + and +Copyright (C) 2011 Circuits At Home, LTD. All rights reserved. + +This software may be distributed and modified under the terms of the GNU +General Public License version 2 (GPL2) as publishe7d by the Free Software +Foundation and appearing in the file GPL2.TXT included in the packaging of +this file. Please note that GPL2 Section 2[b] requires that all works based +on this software must also be made publicly available under the terms of +the GPL2 ("Copyleft"). + +Contact information +------------------- + +Circuits At Home, LTD +Web : http://www.circuitsathome.com +e-mail : support@circuitsathome.com + */ + +#if defined(USB_HOST_SHIELD_H) && !defined(USB_HOST_SHIELD_LOADED) +#define USB_HOST_SHIELD_LOADED +#include + +#if !defined(digitalPinToInterrupt) +#error digitalPinToInterrupt not defined, complain to your board maintainer. +#endif + + +#if USB_HOST_SHIELD_USE_ISR + +// allow two slots. this makes the maximum allowed shield count TWO +// for AVRs this is limited to pins 2 and 3 ONLY +// for all other boards, one odd and one even pin number is allowed. +static MAX3421E_HOST *ISReven; +static MAX3421E_HOST *ISRodd; + +static void UHS_NI call_ISReven(void) { + ISReven->ISRTask(); +} + +static void UHS_NI call_ISRodd(void) { + UHS_PIN_WRITE(LED_BUILTIN, HIGH); + ISRodd->ISRTask(); +} +#endif + + +void UHS_NI MAX3421E_HOST::resume_host(void) { + // Used on MCU that lack control of IRQ priority (AVR). + // Resumes ISRs. + // NOTE: you must track the state yourself! +#if defined(__AVR__) + noInterrupts(); + if(irq_pin & 1) { + ISRodd = this; + attachInterrupt(UHS_GET_DPI(irq_pin), call_ISRodd, IRQ_SENSE); + } else { + ISReven = this; + attachInterrupt(UHS_GET_DPI(irq_pin), call_ISReven, IRQ_SENSE); + } + interrupts(); +#endif + +} +/* write single byte into MAX3421e register */ +void UHS_NI MAX3421E_HOST::regWr(uint8_t reg, uint8_t data) { + SPIclass.beginTransaction(MAX3421E_SPI_Settings); + MARLIN_UHS_WRITE_SS(LOW); + SPIclass.transfer(reg | 0x02); + SPIclass.transfer(data); + MARLIN_UHS_WRITE_SS(HIGH); + SPIclass.endTransaction(); +} + + +/* multiple-byte write */ + +/* returns a pointer to memory position after last written */ +uint8_t* UHS_NI MAX3421E_HOST::bytesWr(uint8_t reg, uint8_t nbytes, uint8_t* data_p) { + SPIclass.beginTransaction(MAX3421E_SPI_Settings); + MARLIN_UHS_WRITE_SS(LOW); + SPIclass.transfer(reg | 0x02); + //printf("%2.2x :", reg); + + while(nbytes) { + SPIclass.transfer(*data_p); + //printf("%2.2x ", *data_p); + nbytes--; + data_p++; // advance data pointer + } + MARLIN_UHS_WRITE_SS(HIGH); + SPIclass.endTransaction(); + //printf("\r\n"); + return (data_p); +} +/* GPIO write */ +/*GPIO byte is split between 2 registers, so two writes are needed to write one byte */ + +/* GPOUT bits are in the low nibble. 0-3 in IOPINS1, 4-7 in IOPINS2 */ +void UHS_NI MAX3421E_HOST::gpioWr(uint8_t data) { + regWr(rIOPINS1, data); + data >>= 4; + regWr(rIOPINS2, data); + return; +} + +/* single host register read */ +uint8_t UHS_NI MAX3421E_HOST::regRd(uint8_t reg) { + SPIclass.beginTransaction(MAX3421E_SPI_Settings); + MARLIN_UHS_WRITE_SS(LOW); + SPIclass.transfer(reg); + uint8_t rv = SPIclass.transfer(0); + MARLIN_UHS_WRITE_SS(HIGH); + SPIclass.endTransaction(); + return (rv); +} +/* multiple-byte register read */ + +/* returns a pointer to a memory position after last read */ +uint8_t* UHS_NI MAX3421E_HOST::bytesRd(uint8_t reg, uint8_t nbytes, uint8_t* data_p) { + SPIclass.beginTransaction(MAX3421E_SPI_Settings); + MARLIN_UHS_WRITE_SS(LOW); + SPIclass.transfer(reg); + while(nbytes) { + *data_p++ = SPIclass.transfer(0); + nbytes--; + } + MARLIN_UHS_WRITE_SS(HIGH); + SPIclass.endTransaction(); + return ( data_p); +} + +/* GPIO read. See gpioWr for explanation */ + +/* GPIN pins are in high nibbles of IOPINS1, IOPINS2 */ +uint8_t UHS_NI MAX3421E_HOST::gpioRd(void) { + uint8_t gpin = 0; + gpin = regRd(rIOPINS2); //pins 4-7 + gpin &= 0xf0; //clean lower nibble + gpin |= (regRd(rIOPINS1) >> 4); //shift low bits and OR with upper from previous operation. + return ( gpin); +} + +/* reset MAX3421E. Returns number of microseconds it took for PLL to stabilize after reset + or zero if PLL haven't stabilized in 65535 cycles */ +uint16_t UHS_NI MAX3421E_HOST::reset(void) { + uint16_t i = 0; + + // Initiate chip reset + regWr(rUSBCTL, bmCHIPRES); + regWr(rUSBCTL, 0x00); + + int32_t now; + uint32_t expires = micros() + 65535; + + // Enable full-duplex SPI so we can read rUSBIRQ + regWr(rPINCTL, bmFDUPSPI); + while((int32_t)(micros() - expires) < 0L) { + if((regRd(rUSBIRQ) & bmOSCOKIRQ)) { + break; + } + } + now = (int32_t)(micros() - expires); + if(now < 0L) { + i = 65535 + now; // Note this subtracts, as now is negative + } + return (i); +} + +void UHS_NI MAX3421E_HOST::VBUS_changed(void) { + /* modify USB task state because Vbus changed or unknown */ + uint8_t speed = 1; + //printf("\r\n\r\n\r\n\r\nSTATE %2.2x -> ", usb_task_state); + switch(vbusState) { + case LSHOST: // Low speed + + speed = 0; + // Intentional fall-through + case FSHOST: // Full speed + // Start device initialization if we are not initializing + // Resets to the device cause an IRQ + // usb_task_state == UHS_USB_HOST_STATE_RESET_NOT_COMPLETE; + //if((usb_task_state & UHS_USB_HOST_STATE_MASK) != UHS_USB_HOST_STATE_DETACHED) { + ReleaseChildren(); + if(!doingreset) { + if(usb_task_state == UHS_USB_HOST_STATE_RESET_NOT_COMPLETE) { + usb_task_state = UHS_USB_HOST_STATE_WAIT_BUS_READY; + } else if(usb_task_state != UHS_USB_HOST_STATE_WAIT_BUS_READY) { + usb_task_state = UHS_USB_HOST_STATE_DEBOUNCE; + } + } + sof_countdown = 0; + break; + case SE1: //illegal state + sof_countdown = 0; + doingreset = false; + ReleaseChildren(); + usb_task_state = UHS_USB_HOST_STATE_ILLEGAL; + break; + case SE0: //disconnected + default: + sof_countdown = 0; + doingreset = false; + ReleaseChildren(); + usb_task_state = UHS_USB_HOST_STATE_IDLE; + break; + } + usb_host_speed = speed; + //printf("0x%2.2x\r\n\r\n\r\n\r\n", usb_task_state); + return; +}; + +/** + * Probe bus to determine device presence and speed, + * then switch host to detected speed. + */ +void UHS_NI MAX3421E_HOST::busprobe(void) { + uint8_t bus_sample; + uint8_t tmpdata; + bus_sample = regRd(rHRSL); //Get J,K status + bus_sample &= (bmJSTATUS | bmKSTATUS); //zero the rest of the byte + switch(bus_sample) { //start full-speed or low-speed host + case(bmJSTATUS): + // Serial.println("J"); + if((regRd(rMODE) & bmLOWSPEED) == 0) { + regWr(rMODE, MODE_FS_HOST); // start full-speed host + vbusState = FSHOST; + } else { + regWr(rMODE, MODE_LS_HOST); // start low-speed host + vbusState = LSHOST; + } + #ifdef USB_HOST_MANUAL_POLL + enable_frame_irq(true); + #endif + tmpdata = regRd(rMODE) | bmSOFKAENAB; // start SOF generation + regWr(rHIRQ, bmFRAMEIRQ); // see data sheet. + regWr(rMODE, tmpdata); + break; + case(bmKSTATUS): + // Serial.println("K"); + if((regRd(rMODE) & bmLOWSPEED) == 0) { + regWr(rMODE, MODE_LS_HOST); // start low-speed host + vbusState = LSHOST; + } else { + regWr(rMODE, MODE_FS_HOST); // start full-speed host + vbusState = FSHOST; + } + #ifdef USB_HOST_MANUAL_POLL + enable_frame_irq(true); + #endif + tmpdata = regRd(rMODE) | bmSOFKAENAB; // start SOF generation + regWr(rHIRQ, bmFRAMEIRQ); // see data sheet. + regWr(rMODE, tmpdata); + break; + case(bmSE1): //illegal state + // Serial.println("I"); + regWr(rMODE, bmDPPULLDN | bmDMPULLDN | bmHOST); + vbusState = SE1; + // sofevent = false; + break; + case(bmSE0): //disconnected state + // Serial.println("D"); + regWr(rMODE, bmDPPULLDN | bmDMPULLDN | bmHOST); + vbusState = SE0; + // sofevent = false; + break; + }//end switch( bus_sample ) +} + +/** + * Initialize USB hardware, turn on VBUS + * + * @param mseconds Delay energizing VBUS after mseconds, A value of INT16_MIN means no delay. + * @return 0 on success, -1 on error + */ +int16_t UHS_NI MAX3421E_HOST::Init(int16_t mseconds) { + usb_task_state = UHS_USB_HOST_STATE_INITIALIZE; //set up state machine + // Serial.print("MAX3421E 'this' USB Host @ 0x"); + // Serial.println((uint32_t)this, HEX); + // Serial.print("MAX3421E 'this' USB Host Address Pool @ 0x"); + // Serial.println((uint32_t)GetAddressPool(), HEX); + Init_dyn_SWI(); + UHS_printf_HELPER_init(); + noInterrupts(); +#ifdef ARDUINO_AVR_ADK + // For Mega ADK, which has a Max3421e on-board, + // set MAX_RESET to output mode, and then set it to HIGH + // PORTJ bit 2 + if(irq_pin == 54) { + DDRJ |= 0x04; // output + PORTJ |= 0x04; // HIGH + } +#endif + SPIclass.begin(); +#ifdef ARDUINO_AVR_ADK + if(irq_pin == 54) { + DDRE &= ~0x20; // input + PORTE |= 0x20; // pullup + } else +#endif + pinMode(irq_pin, INPUT_PULLUP); + //UHS_PIN_WRITE(irq_pin, HIGH); + pinMode(ss_pin, OUTPUT); + MARLIN_UHS_WRITE_SS(HIGH); + +#ifdef USB_HOST_SHIELD_TIMING_PIN + pinMode(USB_HOST_SHIELD_TIMING_PIN, OUTPUT); + // My counter/timer can't work on an inverted gate signal + // so we gate using a high pulse -- AJK + UHS_PIN_WRITE(USB_HOST_SHIELD_TIMING_PIN, LOW); +#endif + interrupts(); + +#if USB_HOST_SHIELD_USE_ISR + int intr = digitalPinToInterrupt(irq_pin); + if(intr == NOT_AN_INTERRUPT) { +#if defined(ARDUINO_AVR_ADK) + if(irq_pin == 54) + intr = 6; + else +#endif + return (-2); + } + SPIclass.usingInterrupt(intr); +#else + SPIclass.usingInterrupt(255); +#endif +#if !defined(NO_AUTO_SPEED) + // test to get to reset acceptance. + uint32_t spd = UHS_MAX3421E_SPD; +again: + MAX3421E_SPI_Settings = SPISettings(spd, MSBFIRST, SPI_MODE0); + if(reset() == 0) { + MAX_HOST_DEBUG(PSTR("Fail SPI speed %lu\r\n"), spd); + if(spd > 1999999) { + spd -= 1000000; + goto again; + } + return (-1); + } else { + // reset passes, does 64k? + uint8_t sample_wr = 0; + uint8_t sample_rd = 0; + uint8_t gpinpol_copy = regRd(rGPINPOL); + for(uint16_t j = 0; j < 65535; j++) { + regWr(rGPINPOL, sample_wr); + sample_rd = regRd(rGPINPOL); + if(sample_rd != sample_wr) { + MAX_HOST_DEBUG(PSTR("Fail SPI speed %lu\r\n"), spd); + if(spd > 1999999) { + spd -= 1000000; + goto again; + } + return (-1); + } + sample_wr++; + } + regWr(rGPINPOL, gpinpol_copy); + } + + MAX_HOST_DEBUG(PSTR("Pass SPI speed %lu\r\n"), spd); +#endif + + if(reset() == 0) { //OSCOKIRQ hasn't asserted in time + MAX_HOST_DEBUG(PSTR("OSCOKIRQ hasn't asserted in time")); + return ( -1); + } + + /* MAX3421E - full-duplex SPI, interrupt kind, vbus off */ + regWr(rPINCTL, (bmFDUPSPI | bmIRQ_SENSE | GPX_VBDET)); + + // Delay a minimum of 1 second to ensure any capacitors are drained. + // 1 second is required to make sure we do not smoke a Microdrive! + if(mseconds != INT16_MIN) { + if(mseconds < 1000) mseconds = 1000; + delay(mseconds); // We can't depend on SOF timer here. + } + + regWr(rMODE, bmDPPULLDN | bmDMPULLDN | bmHOST); // set pull-downs, Host + + // Enable interrupts on the MAX3421e + regWr(rHIEN, IRQ_CHECK_MASK); + // Enable interrupt pin on the MAX3421e, set pulse width for edge + regWr(rCPUCTL, (bmIE | bmPULSEWIDTH)); + + /* check if device is connected */ + regWr(rHCTL, bmSAMPLEBUS); // sample USB bus + while(!(regRd(rHCTL) & bmSAMPLEBUS)); //wait for sample operation to finish + + busprobe(); //check if anything is connected + VBUS_changed(); + + // GPX pin on. This is done here so that a change is detected if we have a switch connected. + /* MAX3421E - full-duplex SPI, interrupt kind, vbus on */ + regWr(rPINCTL, (bmFDUPSPI | bmIRQ_SENSE)); + regWr(rHIRQ, bmBUSEVENTIRQ); // see data sheet. + regWr(rHCTL, bmBUSRST); // issue bus reset to force generate yet another possible IRQ + + +#if USB_HOST_SHIELD_USE_ISR + // Attach ISR to service IRQ from MAX3421e + noInterrupts(); + if(irq_pin & 1) { + ISRodd = this; + attachInterrupt(UHS_GET_DPI(irq_pin), call_ISRodd, IRQ_SENSE); + } else { + ISReven = this; + attachInterrupt(UHS_GET_DPI(irq_pin), call_ISReven, IRQ_SENSE); + } + interrupts(); +#endif + //printf("\r\nrPINCTL 0x%2.2X\r\n", rPINCTL); + //printf("rCPUCTL 0x%2.2X\r\n", rCPUCTL); + //printf("rHIEN 0x%2.2X\r\n", rHIEN); + //printf("irq_pin %i\r\n", irq_pin); + return 0; +} + +/** + * Setup UHS_EpInfo structure + * + * @param addr USB device address + * @param ep Endpoint + * @param ppep pointer to the pointer to a valid UHS_EpInfo structure + * @param nak_limit how many NAKs before aborting + * @return 0 on success + */ +uint8_t UHS_NI MAX3421E_HOST::SetAddress(uint8_t addr, uint8_t ep, UHS_EpInfo **ppep, uint16_t &nak_limit) { + UHS_Device *p = addrPool.GetUsbDevicePtr(addr); + + if(!p) + return UHS_HOST_ERROR_NO_ADDRESS_IN_POOL; + + if(!p->epinfo) + return UHS_HOST_ERROR_NULL_EPINFO; + + *ppep = getEpInfoEntry(addr, ep); + + if(!*ppep) + return UHS_HOST_ERROR_NO_ENDPOINT_IN_TABLE; + + nak_limit = (0x0001UL << (((*ppep)->bmNakPower > UHS_USB_NAK_MAX_POWER) ? UHS_USB_NAK_MAX_POWER : (*ppep)->bmNakPower)); + nak_limit--; + /* + USBTRACE2("\r\nAddress: ", addr); + USBTRACE2(" EP: ", ep); + USBTRACE2(" NAK Power: ",(*ppep)->bmNakPower); + USBTRACE2(" NAK Limit: ", nak_limit); + USBTRACE("\r\n"); + */ + regWr(rPERADDR, addr); //set peripheral address + + uint8_t mode = regRd(rMODE); + + //Serial.print("\r\nMode: "); + //Serial.println( mode, HEX); + //Serial.print("\r\nLS: "); + //Serial.println(p->speed, HEX); + + // Set bmLOWSPEED and bmHUBPRE in case of low-speed device, reset them otherwise + regWr(rMODE, (p->speed) ? mode & ~(bmHUBPRE | bmLOWSPEED) : mode | bmLOWSPEED | hub_present); + + return 0; +} + +/** + * Receive a packet + * + * @param pep pointer to a valid UHS_EpInfo structure + * @param nak_limit how many NAKs before aborting + * @param nbytesptr pointer to maximum number of bytes of data to receive + * @param data pointer to data buffer + * @return 0 on success + */ +uint8_t UHS_NI MAX3421E_HOST::InTransfer(UHS_EpInfo *pep, uint16_t nak_limit, uint16_t *nbytesptr, uint8_t* data) { + uint8_t rcode = 0; + uint8_t pktsize; + + uint16_t nbytes = *nbytesptr; + MAX_HOST_DEBUG(PSTR("Requesting %i bytes "), nbytes); + uint8_t maxpktsize = pep->maxPktSize; + + *nbytesptr = 0; + regWr(rHCTL, (pep->bmRcvToggle) ? bmRCVTOG1 : bmRCVTOG0); //set toggle value + + // use a 'break' to exit this loop + while(1) { + rcode = dispatchPkt(MAX3421E_tokIN, pep->epAddr, nak_limit); //IN packet to EP-'endpoint'. Function takes care of NAKS. +#if 0 + // This issue should be resolved now. + if(rcode == UHS_HOST_ERROR_TOGERR) { + //MAX_HOST_DEBUG(PSTR("toggle wrong\r\n")); + // yes, we flip it wrong here so that next time it is actually correct! + pep->bmRcvToggle = (regRd(rHRSL) & bmSNDTOGRD) ? 0 : 1; + regWr(rHCTL, (pep->bmRcvToggle) ? bmRCVTOG1 : bmRCVTOG0); //set toggle value + continue; + } +#endif + if(rcode) { + //MAX_HOST_DEBUG(PSTR(">>>>>>>> Problem! dispatchPkt %2.2x\r\n"), rcode); + break; //should be 0, indicating ACK. Else return error code. + } + /* check for RCVDAVIRQ and generate error if not present */ + /* the only case when absence of RCVDAVIRQ makes sense is when toggle error occurred. Need to add handling for that */ + if((regRd(rHIRQ) & bmRCVDAVIRQ) == 0) { + //MAX_HOST_DEBUG(PSTR(">>>>>>>> Problem! NO RCVDAVIRQ!\r\n")); + rcode = 0xf0; //receive error + break; + } + pktsize = regRd(rRCVBC); //number of received bytes + MAX_HOST_DEBUG(PSTR("Got %i bytes \r\n"), pktsize); + + if(pktsize > nbytes) { //certain devices send more than asked + //MAX_HOST_DEBUG(PSTR(">>>>>>>> Warning: wanted %i bytes but got %i.\r\n"), nbytes, pktsize); + pktsize = nbytes; + } + + int16_t mem_left = (int16_t)nbytes - *((int16_t*)nbytesptr); + + if(mem_left < 0) + mem_left = 0; + + data = bytesRd(rRCVFIFO, ((pktsize > mem_left) ? mem_left : pktsize), data); + + regWr(rHIRQ, bmRCVDAVIRQ); // Clear the IRQ & free the buffer + *nbytesptr += pktsize; // add this packet's byte count to total transfer length + + /* The transfer is complete under two conditions: */ + /* 1. The device sent a short packet (L.T. maxPacketSize) */ + /* 2. 'nbytes' have been transferred. */ + if((pktsize < maxpktsize) || (*nbytesptr >= nbytes)) // have we transferred 'nbytes' bytes? + { + // Save toggle value + pep->bmRcvToggle = ((regRd(rHRSL) & bmRCVTOGRD)) ? 1 : 0; + //MAX_HOST_DEBUG(PSTR("\r\n")); + rcode = 0; + break; + } // if + } //while( 1 ) + return ( rcode); +} + +/** + * Transmit a packet + * + * @param pep pointer to a valid UHS_EpInfo structure + * @param nak_limit how many NAKs before aborting + * @param nbytes number of bytes of data to send + * @param data pointer to data buffer + * @return 0 on success + */ +uint8_t UHS_NI MAX3421E_HOST::OutTransfer(UHS_EpInfo *pep, uint16_t nak_limit, uint16_t nbytes, uint8_t *data) { + uint8_t rcode = UHS_HOST_ERROR_NONE; + uint8_t retry_count; + uint8_t *data_p = data; //local copy of the data pointer + uint16_t bytes_tosend; + uint16_t nak_count; + uint16_t bytes_left = nbytes; + + uint8_t maxpktsize = pep->maxPktSize; + + if(maxpktsize < 1 || maxpktsize > 64) + return UHS_HOST_ERROR_BAD_MAX_PACKET_SIZE; + + unsigned long timeout = millis() + UHS_HOST_TRANSFER_MAX_MS; + + regWr(rHCTL, (pep->bmSndToggle) ? bmSNDTOG1 : bmSNDTOG0); //set toggle value + + while(bytes_left) { + SYSTEM_OR_SPECIAL_YIELD(); + retry_count = 0; + nak_count = 0; + bytes_tosend = (bytes_left >= maxpktsize) ? maxpktsize : bytes_left; + bytesWr(rSNDFIFO, bytes_tosend, data_p); //filling output FIFO + regWr(rSNDBC, bytes_tosend); //set number of bytes + regWr(rHXFR, (MAX3421E_tokOUT | pep->epAddr)); //dispatch packet + while(!(regRd(rHIRQ) & bmHXFRDNIRQ)); //wait for the completion IRQ + regWr(rHIRQ, bmHXFRDNIRQ); //clear IRQ + rcode = (regRd(rHRSL) & 0x0f); + + while(rcode && ((long)(millis() - timeout) < 0L)) { + switch(rcode) { + case UHS_HOST_ERROR_NAK: + nak_count++; + if(nak_limit && (nak_count == nak_limit)) + goto breakout; + break; + case UHS_HOST_ERROR_TIMEOUT: + retry_count++; + if(retry_count == UHS_HOST_TRANSFER_RETRY_MAXIMUM) + goto breakout; + break; + case UHS_HOST_ERROR_TOGERR: + // yes, we flip it wrong here so that next time it is actually correct! + pep->bmSndToggle = (regRd(rHRSL) & bmSNDTOGRD) ? 0 : 1; + regWr(rHCTL, (pep->bmSndToggle) ? bmSNDTOG1 : bmSNDTOG0); //set toggle value + break; + default: + goto breakout; + }//switch( rcode + + /* process NAK according to Host out NAK bug */ + regWr(rSNDBC, 0); + regWr(rSNDFIFO, *data_p); + regWr(rSNDBC, bytes_tosend); + regWr(rHXFR, (MAX3421E_tokOUT | pep->epAddr)); //dispatch packet + while(!(regRd(rHIRQ) & bmHXFRDNIRQ)); //wait for the completion IRQ + regWr(rHIRQ, bmHXFRDNIRQ); //clear IRQ + rcode = (regRd(rHRSL) & 0x0f); + SYSTEM_OR_SPECIAL_YIELD(); + }//while( rcode && .... + bytes_left -= bytes_tosend; + data_p += bytes_tosend; + }//while( bytes_left... +breakout: + + pep->bmSndToggle = (regRd(rHRSL) & bmSNDTOGRD) ? 1 : 0; //bmSNDTOG1 : bmSNDTOG0; //update toggle + return ( rcode); //should be 0 in all cases +} + +/** + * Send the actual packet. + * + * @param token + * @param ep Endpoint + * @param nak_limit how many NAKs before aborting, 0 == exit after timeout + * @return 0 on success, 0xFF indicates NAK timeout. @see + */ +/* Assumes peripheral address is set and relevant buffer is loaded/empty */ +/* If NAK, tries to re-send up to nak_limit times */ +/* If nak_limit == 0, do not count NAKs, exit after timeout */ +/* If bus timeout, re-sends up to USB_RETRY_LIMIT times */ + +/* return codes 0x00-0x0f are HRSLT( 0x00 being success ), 0xff means timeout */ +uint8_t UHS_NI MAX3421E_HOST::dispatchPkt(uint8_t token, uint8_t ep, uint16_t nak_limit) { + unsigned long timeout = millis() + UHS_HOST_TRANSFER_MAX_MS; + uint8_t tmpdata; + uint8_t rcode = UHS_HOST_ERROR_NONE; + uint8_t retry_count = 0; + uint16_t nak_count = 0; + + for(;;) { + regWr(rHXFR, (token | ep)); //launch the transfer + while((long)(millis() - timeout) < 0L) //wait for transfer completion + { + SYSTEM_OR_SPECIAL_YIELD(); + tmpdata = regRd(rHIRQ); + + if(tmpdata & bmHXFRDNIRQ) { + regWr(rHIRQ, bmHXFRDNIRQ); //clear the interrupt + //rcode = 0x00; + break; + }//if( tmpdata & bmHXFRDNIRQ + + }//while ( millis() < timeout + + rcode = (regRd(rHRSL) & 0x0f); //analyze transfer result + + switch(rcode) { + case UHS_HOST_ERROR_NAK: + nak_count++; + if(nak_limit && (nak_count == nak_limit)) + return (rcode); + delayMicroseconds(200); + break; + case UHS_HOST_ERROR_TIMEOUT: + retry_count++; + if(retry_count == UHS_HOST_TRANSFER_RETRY_MAXIMUM) + return (rcode); + break; + default: + return (rcode); + }//switch( rcode + } +} + +// +// NULL is error, we don't need to know the reason. +// + +UHS_EpInfo * UHS_NI MAX3421E_HOST::ctrlReqOpen(uint8_t addr, uint64_t Request, uint8_t *dataptr) { + uint8_t rcode; + UHS_EpInfo *pep = NULL; + uint16_t nak_limit = 0; + rcode = SetAddress(addr, 0, &pep, nak_limit); + + if(!rcode) { + + bytesWr(rSUDFIFO, 8, (uint8_t*)(&Request)); //transfer to setup packet FIFO + + rcode = dispatchPkt(MAX3421E_tokSETUP, 0, nak_limit); //dispatch packet + if(!rcode) { + if(dataptr != NULL) { + if(((Request)/* bmReqType*/ & 0x80) == 0x80) { + pep->bmRcvToggle = 1; //bmRCVTOG1; + } else { + pep->bmSndToggle = 1; //bmSNDTOG1; + } + } + } else { + pep = NULL; + } + } + return pep; +} + +uint8_t UHS_NI MAX3421E_HOST::ctrlReqRead(UHS_EpInfo *pep, uint16_t *left, uint16_t *read, uint16_t nbytes, uint8_t *dataptr) { + *read = 0; + uint16_t nak_limit = 0; + MAX_HOST_DEBUG(PSTR("ctrlReqRead left: %i\r\n"), *left); + if(*left) { +again: + *read = nbytes; + uint8_t rcode = InTransfer(pep, nak_limit, read, dataptr); + if(rcode == UHS_HOST_ERROR_TOGERR) { + // yes, we flip it wrong here so that next time it is actually correct! + pep->bmRcvToggle = (regRd(rHRSL) & bmSNDTOGRD) ? 0 : 1; + goto again; + } + + if(rcode) { + MAX_HOST_DEBUG(PSTR("ctrlReqRead ERROR: %2.2x, left: %i, read %i\r\n"), rcode, *left, *read); + return rcode; + } + *left -= *read; + MAX_HOST_DEBUG(PSTR("ctrlReqRead left: %i, read %i\r\n"), *left, *read); + } + return 0; +} + +uint8_t UHS_NI MAX3421E_HOST::ctrlReqClose(UHS_EpInfo *pep, uint8_t bmReqType, uint16_t left, uint16_t nbytes, uint8_t *dataptr) { + uint8_t rcode = 0; + + //MAX_HOST_DEBUG(PSTR("Closing")); + if(((bmReqType & 0x80) == 0x80) && pep && left && dataptr) { + MAX_HOST_DEBUG(PSTR("ctrlReqRead Sinking %i\r\n"), left); + // If reading, sink the rest of the data. + while(left) { + uint16_t read = nbytes; + rcode = InTransfer(pep, 0, &read, dataptr); + if(rcode == UHS_HOST_ERROR_TOGERR) { + // yes, we flip it wrong here so that next time it is actually correct! + pep->bmRcvToggle = (regRd(rHRSL) & bmSNDTOGRD) ? 0 : 1; + continue; + } + if(rcode) break; + left -= read; + if(read < nbytes) break; + } + } + if(!rcode) { + // Serial.println("Dispatching"); + rcode = dispatchPkt(((bmReqType & 0x80) == 0x80) ? MAX3421E_tokOUTHS : MAX3421E_tokINHS, 0, 0); //GET if direction + // } else { + // Serial.println("Bypassed Dispatch"); + } + return rcode; +} + +/** + * Bottom half of the ISR task + */ +void UHS_NI MAX3421E_HOST::ISRbottom(void) { + uint8_t x; + // Serial.print("Enter "); + // Serial.print((uint32_t)this,HEX); + // Serial.print(" "); + // Serial.println(usb_task_state, HEX); + + DDSB(); + if(condet) { + VBUS_changed(); +#if USB_HOST_SHIELD_USE_ISR + noInterrupts(); +#endif + condet = false; +#if USB_HOST_SHIELD_USE_ISR + interrupts(); +#endif + } + switch(usb_task_state) { + case UHS_USB_HOST_STATE_INITIALIZE: + // should never happen... + MAX_HOST_DEBUG(PSTR("UHS_USB_HOST_STATE_INITIALIZE\r\n")); + busprobe(); + VBUS_changed(); + break; + case UHS_USB_HOST_STATE_DEBOUNCE: + MAX_HOST_DEBUG(PSTR("UHS_USB_HOST_STATE_DEBOUNCE\r\n")); + // This seems to not be needed. The host controller has debounce built in. + sof_countdown = UHS_HOST_DEBOUNCE_DELAY_MS; + usb_task_state = UHS_USB_HOST_STATE_DEBOUNCE_NOT_COMPLETE; + break; + case UHS_USB_HOST_STATE_DEBOUNCE_NOT_COMPLETE: + MAX_HOST_DEBUG(PSTR("UHS_USB_HOST_STATE_DEBOUNCE_NOT_COMPLETE\r\n")); + if(!sof_countdown) usb_task_state = UHS_USB_HOST_STATE_RESET_DEVICE; + break; + case UHS_USB_HOST_STATE_RESET_DEVICE: + MAX_HOST_DEBUG(PSTR("UHS_USB_HOST_STATE_RESET_DEVICE\r\n")); + busevent = true; + usb_task_state = UHS_USB_HOST_STATE_RESET_NOT_COMPLETE; + regWr(rHIRQ, bmBUSEVENTIRQ); // see data sheet. + regWr(rHCTL, bmBUSRST); // issue bus reset + break; + case UHS_USB_HOST_STATE_RESET_NOT_COMPLETE: + MAX_HOST_DEBUG(PSTR("UHS_USB_HOST_STATE_RESET_NOT_COMPLETE\r\n")); + if(!busevent) usb_task_state = UHS_USB_HOST_STATE_WAIT_BUS_READY; + break; + case UHS_USB_HOST_STATE_WAIT_BUS_READY: + MAX_HOST_DEBUG(PSTR("UHS_USB_HOST_STATE_WAIT_BUS_READY\r\n")); + usb_task_state = UHS_USB_HOST_STATE_CONFIGURING; + break; // don't fall through + + case UHS_USB_HOST_STATE_CONFIGURING: + usb_task_state = UHS_USB_HOST_STATE_CHECK; + x = Configuring(0, 1, usb_host_speed); + usb_error = x; + if(usb_task_state == UHS_USB_HOST_STATE_CHECK) { + if(x) { + MAX_HOST_DEBUG(PSTR("Error 0x%2.2x"), x); + if(x == UHS_HOST_ERROR_JERR) { + usb_task_state = UHS_USB_HOST_STATE_IDLE; + } else if(x != UHS_HOST_ERROR_DEVICE_INIT_INCOMPLETE) { + usb_error = x; + usb_task_state = UHS_USB_HOST_STATE_ERROR; + } + } else + usb_task_state = UHS_USB_HOST_STATE_CONFIGURING_DONE; + } + break; + + case UHS_USB_HOST_STATE_CHECK: + // Serial.println((uint32_t)__builtin_return_address(0), HEX); + break; + case UHS_USB_HOST_STATE_CONFIGURING_DONE: + usb_task_state = UHS_USB_HOST_STATE_RUNNING; + break; + #ifdef USB_HOST_MANUAL_POLL + case UHS_USB_HOST_STATE_RUNNING: + case UHS_USB_HOST_STATE_ERROR: + case UHS_USB_HOST_STATE_IDLE: + case UHS_USB_HOST_STATE_ILLEGAL: + enable_frame_irq(false); + break; + #else + case UHS_USB_HOST_STATE_RUNNING: + Poll_Others(); + for(x = 0; (usb_task_state == UHS_USB_HOST_STATE_RUNNING) && (x < UHS_HOST_MAX_INTERFACE_DRIVERS); x++) { + if(devConfig[x]) { + if(devConfig[x]->bPollEnable) devConfig[x]->Poll(); + } + } + // fall thru + #endif + default: + // Do nothing + break; + } // switch( usb_task_state ) + DDSB(); +#if USB_HOST_SHIELD_USE_ISR + if(condet) { + VBUS_changed(); + noInterrupts(); + condet = false; + interrupts(); + } +#endif +#ifdef USB_HOST_SHIELD_TIMING_PIN + // My counter/timer can't work on an inverted gate signal + // so we gate using a high pulse -- AJK + UHS_PIN_WRITE(USB_HOST_SHIELD_TIMING_PIN, LOW); +#endif + //usb_task_polling_disabled--; + EnablePoll(); + DDSB(); +} + + +/* USB main task. Services the MAX3421e */ +#if !USB_HOST_SHIELD_USE_ISR + +void UHS_NI MAX3421E_HOST::ISRTask(void) { +} +void UHS_NI MAX3421E_HOST::Task(void) +#else + +void UHS_NI MAX3421E_HOST::Task(void) { +#ifdef USB_HOST_MANUAL_POLL + if(usb_task_state == UHS_USB_HOST_STATE_RUNNING) { + noInterrupts(); + for(uint8_t x = 0; x < UHS_HOST_MAX_INTERFACE_DRIVERS; x++) + if(devConfig[x] && devConfig[x]->bPollEnable) + devConfig[x]->Poll(); + interrupts(); + } +#endif +} + +void UHS_NI MAX3421E_HOST::ISRTask(void) +#endif +{ + DDSB(); + +#if !defined(SWI_IRQ_NUM) + suspend_host(); +#if USB_HOST_SHIELD_USE_ISR + // Enable interrupts + interrupts(); +#endif +#endif + + counted = false; + if(!MARLIN_UHS_READ_IRQ()) { + uint8_t HIRQALL = regRd(rHIRQ); //determine interrupt source + uint8_t HIRQ = HIRQALL & IRQ_CHECK_MASK; + uint8_t HIRQ_sendback = 0x00; + + if((HIRQ & bmCONDETIRQ) || (HIRQ & bmBUSEVENTIRQ)) { + MAX_HOST_DEBUG + (PSTR("\r\nBEFORE CDIRQ %s BEIRQ %s resetting %s state 0x%2.2x\r\n"), + (HIRQ & bmCONDETIRQ) ? "T" : "F", + (HIRQ & bmBUSEVENTIRQ) ? "T" : "F", + doingreset ? "T" : "F", + usb_task_state + ); + } + // ALWAYS happens BEFORE or WITH CONDETIRQ + if(HIRQ & bmBUSEVENTIRQ) { + HIRQ_sendback |= bmBUSEVENTIRQ; + if(!doingreset) condet = true; + busprobe(); + busevent = false; + } + + if(HIRQ & bmCONDETIRQ) { + HIRQ_sendback |= bmCONDETIRQ; + if(!doingreset) condet = true; + busprobe(); + } + +#if 1 + if((HIRQ & bmCONDETIRQ) || (HIRQ & bmBUSEVENTIRQ)) { + MAX_HOST_DEBUG + (PSTR("\r\nAFTER CDIRQ %s BEIRQ %s resetting %s state 0x%2.2x\r\n"), + (HIRQ & bmCONDETIRQ) ? "T" : "F", + (HIRQ & bmBUSEVENTIRQ) ? "T" : "F", + doingreset ? "T" : "F", + usb_task_state + ); + } +#endif + + if(HIRQ & bmFRAMEIRQ) { + HIRQ_sendback |= bmFRAMEIRQ; + if(sof_countdown) { + sof_countdown--; + counted = true; + } + sofevent = false; + } + + //MAX_HOST_DEBUG(PSTR("\r\n%s%s%s\r\n"), + // sof_countdown ? "T" : "F", + // counted ? "T" : "F", + // usb_task_polling_disabled? "T" : "F"); + DDSB(); + regWr(rHIRQ, HIRQ_sendback); +#if !defined(SWI_IRQ_NUM) + resume_host(); +#if USB_HOST_SHIELD_USE_ISR + // Disable interrupts + noInterrupts(); +#endif +#endif + if(!sof_countdown && !counted && !usb_task_polling_disabled) { + DisablePoll(); + //usb_task_polling_disabled++; +#ifdef USB_HOST_SHIELD_TIMING_PIN + // My counter/timer can't work on an inverted gate signal + // so we gate using a high pulse -- AJK + UHS_PIN_WRITE(USB_HOST_SHIELD_TIMING_PIN, HIGH); +#endif + +#if defined(SWI_IRQ_NUM) + // MAX_HOST_DEBUG(PSTR("--------------- Doing SWI ----------------")); + exec_SWI(this); +#else +#if USB_HOST_SHIELD_USE_ISR + // Enable interrupts + interrupts(); +#endif /* USB_HOST_SHIELD_USE_ISR */ + ISRbottom(); +#endif /* SWI_IRQ_NUM */ + } + } +} + +#if 0 +DDSB(); +#endif +#else +#error "Never include USB_HOST_SHIELD_INLINE.h, include UHS_host.h instead" +#endif diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/macro_logic.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/macro_logic.h new file mode 100644 index 000000000000..9b2b5a374688 --- /dev/null +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/macro_logic.h @@ -0,0 +1,153 @@ +/* + * File: macro_logic.h + * Author: root + * + * Created on December 22, 2018, 4:49 AM + * + * To test: + * gcc -DAJK_TEST_MACRO_LOGIC -E macro_logic.h + * + */ + +#ifndef MACRO_LOGIC_H +#define MACRO_LOGIC_H + +#define AJK_CAT(a, ...) AJK_PRIMITIVE_CAT(a, __VA_ARGS__) +#define AJK_PRIMITIVE_CAT(a, ...) a ## __VA_ARGS__ + +#define AJK_COMPL(b) AJK_PRIMITIVE_CAT(AJK_COMPL_, b) +#define AJK_COMPL_0 1 +#define AJK_COMPL_1 0 + +#define AJK_BITAND(x) AJK_PRIMITIVE_CAT(AJK_BITAND_, x) +#define AJK_BITAND_0(y) 0 +#define AJK_BITAND_1(y) y + +#define AJK_INC(x) AJK_PRIMITIVE_CAT(AJK_INC_, x) +#define AJK_INC_0 1 +#define AJK_INC_1 2 +#define AJK_INC_2 3 +#define AJK_INC_3 4 +#define AJK_INC_4 5 +#define AJK_INC_5 6 +#define AJK_INC_6 7 +#define AJK_INC_7 8 +#define AJK_INC_8 9 +#define AJK_INC_9 10 +#define AJK_INC_10 10 + +#define AJK_DEC(x) AJK_PRIMITIVE_CAT(AJK_DEC_, x) +#define AJK_DEC_0 0 +#define AJK_DEC_1 0 +#define AJK_DEC_2 1 +#define AJK_DEC_3 2 +#define AJK_DEC_4 3 +#define AJK_DEC_5 4 +#define AJK_DEC_6 5 +#define AJK_DEC_7 6 +#define AJK_DEC_8 7 +#define AJK_DEC_9 8 +#define AJK_DEC_10 9 + +#define AJK_CHECK_N(x, n, ...) n +#define AJK_CHECK(...) AJK_CHECK_N(__VA_ARGS__, 0,) +#define AJK_PROBE(x) x, 1, + +#define AJK_IS_PAREN(x) AJK_CHECK(AJK_IS_PAREN_PROBE x) +#define AJK_IS_PAREN_PROBE(...) AJK_PROBE(~) + +#define AJK_NOT(x) AJK_CHECK(AJK_PRIMITIVE_CAT(AJK_NOT_, x)) +#define AJK_NOT_0 AJK_PROBE(~) + +#define AJK_COMPL(b) AJK_PRIMITIVE_CAT(AJK_COMPL_, b) +#define AJK_COMPL_0 1 +#define AJK_COMPL_1 0 + +#define AJK_BOOL(x) AJK_COMPL(AJK_NOT(x)) + +#define AJK_IIF(c) AJK_PRIMITIVE_CAT(AJK_IIF_, c) +#define AJK_IIF_0(t, ...) __VA_ARGS__ +#define AJK_IIF_1(t, ...) t + +#define AJK_IF(c) AJK_IIF(AJK_BOOL(c)) + +#define AJK_EAT(...) +#define AJK_EXPAND(...) __VA_ARGS__ +#define AJK_WHEN(c) AJK_IF(c)(AJK_EXPAND, AJK_EAT) + +#define AJK_EMPTY() +#define AJK_DEFER(id) id AJK_EMPTY() +#define AJK_OBSTRUCT(id) id AJK_DEFER(AJK_EMPTY)() + +#define AJK_EVAL(...) AJK_EVAL1(AJK_EVAL1(AJK_EVAL1(__VA_ARGS__))) +#define AJK_EVAL1(...) AJK_EVAL2(AJK_EVAL2(AJK_EVAL2(__VA_ARGS__))) +#define AJK_EVAL2(...) AJK_EVAL3(AJK_EVAL3(AJK_EVAL3(__VA_ARGS__))) +#define AJK_EVAL3(...) AJK_EVAL4(AJK_EVAL4(AJK_EVAL4(__VA_ARGS__))) +#define AJK_EVAL4(...) AJK_EVAL5(AJK_EVAL5(AJK_EVAL5(__VA_ARGS__))) +#define AJK_EVAL5(...) __VA_ARGS__ + +#define AJK_REPEAT(AJK_count, AJK_macro, ...) \ + AJK_WHEN(AJK_count) \ + ( \ + AJK_OBSTRUCT(AJK_REPEAT_INDIRECT) () \ + ( \ + AJK_DEC(AJK_count), AJK_macro, __VA_ARGS__ \ + ) \ + AJK_OBSTRUCT(AJK_macro) \ + ( \ + AJK_DEC(AJK_count), __VA_ARGS__ \ + ) \ + ) +#define AJK_REPEAT_INDIRECT() AJK_REPEAT + +#define AJK_WHILE(AJK_pred, AJK_op, ...) \ + IF(AJK_pred(__VA_ARGS__)) \ + ( \ + AJK_OBSTRUCT(AJK_WHILE_INDIRECT) () \ + ( \ + AJK_pred, AJK_op, AJK_op(__VA_ARGS__) \ + ), \ + __VA_ARGS__ \ + ) +#define AJK_WHILE_INDIRECT() AJK_WHILE + +#define AJK_PRIMITIVE_COMPARE(x, y) AJK_IS_PAREN \ +( \ + AJK_COMPARE_ ## x ( AJK_COMPARE_ ## y) (()) \ +) + +#define AJK_IS_COMPARABLE(x) AJK_IS_PAREN( AJK_CAT(AJK_COMPARE_, x) (()) ) + +#define AJK_NOT_EQUAL(x, y) \ +AJK_IIF(AJK_BITAND(AJK_IS_COMPARABLE(x))(AJK_IS_COMPARABLE(y)) ) \ +( \ + AJK_PRIMITIVE_COMPARE, \ + 1 AJK_EAT \ +)(x, y) + +#define AJK_EQUAL(x, y) AJK_COMPL(AJK_NOT_EQUAL(x, y)) + + +#define AJK_COMMA() , + +#define AJK_COMMA_IF(n) AJK_IF(n)(AJK_COMMA, AJK_EAT)() + + +#define AJK_COMMA_VAR(AJK_count, AJK_v) AJK_COMMA_IF(AJK_count) AJK_v ## AJK_count + +#define AJK_MAKE_LIST(AJK_v, AJK_count) AJK_EVAL(AJK_REPEAT(AJK_count, AJK_COMMA_VAR, AJK_v)) + +#define AJK_FUN(AJK_count, AJK_v, AJK_args, AJK_body) AJK_v ## AJK_count (AJK_args) { AJK_body(AJK_count) } +#define AJK_MAKE_FUNS(AJK_v, AJK_args, AJK_count, AJK_body) AJK_EVAL(AJK_REPEAT(AJK_count, AJK_FUN, AJK_v, AJK_args, AJK_body)) +#if defined(AJK_TEST_MACRO_LOGIC) + +#define BODY(AJKindex) some(C, statement); contaning(a, test[AJKindex]); +#define ZERO_TIMES_TEST 0 +#define THREE_TIMES_TEST 3 +blank > AJK_MAKE_LIST(VARIABLE_, ZERO_TIMES_TEST) < because zero repeats +Make 3 comma separated indexed variables : AJK_MAKE_LIST(VARIABLE_, THREE_TIMES_TEST) +Make 3 bogus function bodies +AJK_MAKE_FUNS(unsigned Cfunc,(arg1, arg2),3,BODY) +#endif + +#endif /* MACRO_LOGIC_H */ diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/dyn_SWI/SWI_INLINE.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/dyn_SWI/SWI_INLINE.h new file mode 100644 index 000000000000..5516fbf126e1 --- /dev/null +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/dyn_SWI/SWI_INLINE.h @@ -0,0 +1,246 @@ +/* + * File: SWI_INLINE.h + * Author: xxxajk@gmail.com + * + * Created on December 5, 2014, 9:40 AM + * + * This is the actual library. + * There are no 'c' or 'cpp' files. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifdef DYN_SWI_H +#ifndef SWI_INLINE_H +#define SWI_INLINE_H + +#ifndef SWI_MAXIMUM_ALLOWED +#define SWI_MAXIMUM_ALLOWED 4 +#endif + + + +#if defined(__arm__) || defined(ARDUINO_ARCH_PIC32) +static char dyn_SWI_initied = 0; +static dyn_SWI* dyn_SWI_LIST[SWI_MAXIMUM_ALLOWED]; +static dyn_SWI* dyn_SWI_EXEC[SWI_MAXIMUM_ALLOWED]; +#if defined(__arm__) +#if defined(__USE_CMSIS_VECTORS__) +extern "C" { + void (*_VectorsRam[VECTORTABLE_SIZE])(void)__attribute__((aligned(VECTORTABLE_ALIGNMENT))); +} +#else + +__attribute__((always_inline)) static inline void __DSB(void) { + __asm__ volatile ("dsb"); +} +#endif // defined(__USE_CMSIS_VECTORS__) +#else // defined(__arm__) +__attribute__((always_inline)) static inline void __DSB(void) { + __asm__ volatile ("sync" : : : "memory"); +} +#endif // defined(__arm__) + +/** + * Execute queued class ISR routines. + */ +#if defined(ARDUINO_ARCH_PIC32) +static p32_regset *ifs = ((p32_regset *) & IFS0) + (SWI_IRQ_NUM / 32); //interrupt flag register set +static p32_regset *iec = ((p32_regset *) & IEC0) + (SWI_IRQ_NUM / 32); //interrupt enable control reg set +static uint32_t swibit = 1 << (SWI_IRQ_NUM % 32); + +void +#if defined(__PIC32MZXX__) + __attribute__((nomips16,at_vector(SWI_VECTOR),interrupt(SWI_IPL))) +#else + __attribute__((interrupt(),nomips16)) +#endif + softISR(void) { +#else +#if defined(ARDUINO_spresense_ast) +unsigned int softISR(void) { +#else +void softISR(void) { +#endif +#endif + + // + // TO-DO: Perhaps limit to 8, and inline this? + // + + + // Make a working copy, while clearing the queue. + noInterrupts(); +#if defined(ARDUINO_ARCH_PIC32) + //ifs->clr = swibit; +#endif + for(int i = 0; i < SWI_MAXIMUM_ALLOWED; i++) { + dyn_SWI_EXEC[i] = dyn_SWI_LIST[i]; + dyn_SWI_LIST[i] = NULL; + } + __DSB(); + interrupts(); + + // Execute each class SWI + for(int i = 0; i < SWI_MAXIMUM_ALLOWED; i++) { + if(dyn_SWI_EXEC[i]) { +#if defined(__DYN_SWI_DEBUG_LED__) + digitalWrite(__DYN_SWI_DEBUG_LED__, HIGH); +#endif + dyn_SWI_EXEC[i]->dyn_SWISR(); +#if defined(__DYN_SWI_DEBUG_LED__) + digitalWrite(__DYN_SWI_DEBUG_LED__, LOW); +#endif + } + } +#if defined(ARDUINO_ARCH_PIC32) + noInterrupts(); + if(!dyn_SWI_EXEC[0]) ifs->clr = swibit; + interrupts(); +#endif +#if defined(ARDUINO_spresense_ast) + return 0; +#endif +} + +#define DDSB() __DSB() +#endif + + +#if defined(__arm__) +#ifndef interruptsStatus +#define interruptsStatus() __interruptsStatus() +static inline unsigned char __interruptsStatus(void) __attribute__((always_inline, unused)); + +static inline unsigned char __interruptsStatus(void) { + unsigned int primask; + asm volatile ("mrs %0, primask" : "=r" (primask)); + if(primask) return 0; + return 1; +} +#endif + +/** + * Initialize the Dynamic (class) Software Interrupt + */ +static void Init_dyn_SWI(void) { + if(!dyn_SWI_initied) { +#if defined(__USE_CMSIS_VECTORS__) + uint32_t *X_Vectors = (uint32_t*)SCB->VTOR; + for(int i = 0; i < VECTORTABLE_SIZE; i++) { + _VectorsRam[i] = reinterpret_cast(X_Vectors[i]); /* copy vector table to RAM */ + } + /* relocate vector table */ + noInterrupts(); + SCB->VTOR = reinterpret_cast(&_VectorsRam); + DDSB(); + interrupts(); +#endif +#if !defined(ARDUINO_spresense_ast) + for(int i = 0; i < SWI_MAXIMUM_ALLOWED; i++) dyn_SWI_LIST[i] = NULL; + noInterrupts(); + _VectorsRam[SWI_IRQ_NUM + 16] = reinterpret_cast(softISR); + DDSB(); + interrupts(); + NVIC_SET_PRIORITY(SWI_IRQ_NUM, 255); + NVIC_ENABLE_IRQ(SWI_IRQ_NUM); +#endif +#if defined(__DYN_SWI_DEBUG_LED__) + pinMode(__DYN_SWI_DEBUG_LED__, OUTPUT); + digitalWrite(__DYN_SWI_DEBUG_LED__, LOW); +#endif + dyn_SWI_initied = 1; + } +} + +/** + * + * @param klass class that extends dyn_SWI + * @return 0 on queue full, else returns queue position (ones based) + */ +int exec_SWI(const dyn_SWI* klass) { + int rc = 0; + + uint8_t irestore = interruptsStatus(); + // Allow use from inside a critical section... + // ... and prevent races if also used inside an ISR + noInterrupts(); + for(int i = 0; i < SWI_MAXIMUM_ALLOWED; i++) { + if(!dyn_SWI_LIST[i]) { + rc = 1 + i; // Success! + dyn_SWI_LIST[i] = (dyn_SWI*)klass; +#if !defined(ARDUINO_spresense_ast) + if(!NVIC_GET_PENDING(SWI_IRQ_NUM)) NVIC_SET_PENDING(SWI_IRQ_NUM); +#else + // Launch 1-shot timer as an emulated SWI + // Hopefully the value of Zero is legal. + // 1 microsecond latency would suck! + attachTimerInterrupt(softISR, 100); +#endif + DDSB(); + break; + } + } + // Restore interrupts, if they were on. + if(irestore) interrupts(); + return rc; +} +#elif defined(ARDUINO_ARCH_PIC32) + +/** + * Initialize the Dynamic (class) Software Interrupt + */ +static void Init_dyn_SWI(void) { + if(!dyn_SWI_initied) { + uint32_t sreg = disableInterrupts(); + + setIntVector(SWI_VECTOR, softISR); + setIntPriority(SWI_VECTOR, 1, 1); // Lowest priority, ever. + ifs->clr = swibit; + iec->clr = swibit; + iec->set = swibit; + restoreInterrupts(sreg); +#if defined(__DYN_SWI_DEBUG_LED__) + pinMode(__DYN_SWI_DEBUG_LED__, OUTPUT); + UHS_PIN_WRITE(__DYN_SWI_DEBUG_LED__, LOW); +#endif + } +} + +/** + * + * @param klass class that extends dyn_SWI + * @return 0 on queue full, else returns queue position (ones based) + */ +int exec_SWI(const dyn_SWI* klass) { + int rc = 0; + uint32_t sreg = disableInterrupts(); + for(int i = 0; i < SWI_MAXIMUM_ALLOWED; i++) { + if(!dyn_SWI_LIST[i]) { + rc = 1 + i; // Success! + dyn_SWI_LIST[i] = (dyn_SWI*)klass; + if(!(ifs->reg & swibit)) ifs->set = swibit; + ; + break; + } + } + restoreInterrupts(sreg); + return rc; +} + +#endif /* defined(__arm__) */ +#endif /* SWI_INLINE_H */ +#else +#error "Never include SWI_INLINE.h directly, include dyn_SWI.h instead" +#endif diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/dyn_SWI/dyn_SWI.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/dyn_SWI/dyn_SWI.h new file mode 100644 index 000000000000..93118a6d7554 --- /dev/null +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/dyn_SWI/dyn_SWI.h @@ -0,0 +1,172 @@ +/* + * File: dyn_SWI.h + * Author: xxxajk@gmail.com + * + * Created on December 5, 2014, 9:12 AM + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef DYN_SWI_H +#define DYN_SWI_H + + +#if defined(__arm__) || defined(ARDUINO_ARCH_PIC32) +#if defined(ARDUINO_ARCH_PIC32) +#include +#endif +#ifdef __cplusplus + +#if defined(true) +#undef true +#endif + +#if defined(false) +#undef false +#endif + +#endif + +#if defined(ARDUINO_spresense_ast) +#define SWI_IRQ_NUM 666 // because this board is totally evil. +#elif defined(ARDUINO_ARCH_PIC32) +#ifndef SWI_IRQ_NUM +#if defined(_DSPI0_IPL_ISR) +#define SWI_IPL _DSPI0_IPL_ISR +#define SWI_VECTOR _DSPI0_ERR_IRQ +#define SWI_IRQ_NUM _DSPI0_ERR_IRQ +#elif defined(_PMP_ERROR_IRQ) +#define SWI_IRQ_NUM _PMP_ERROR_IRQ +#define SWI_VECTOR _PMP_VECTOR +#else +#error SWI_IRQ_NUM and SWI_VECTOR need a definition +#endif +#ifdef __cplusplus +extern "C" +{ + void +#if defined(__PIC32MZXX__) + __attribute__((nomips16,at_vector(SWI_VECTOR),interrupt(SWI_IPL))) +#else + __attribute__((interrupt(),nomips16)) +#endif + softISR(void); +} +#endif +#endif +#elif !defined(NVIC_NUM_INTERRUPTS) +// Assume CMSIS +#define __USE_CMSIS_VECTORS__ +#if defined(NUMBER_OF_INT_VECTORS) +#define NVIC_NUM_INTERRUPTS (NUMBER_OF_INT_VECTORS-16) +#else +#define NVIC_NUM_INTERRUPTS ((int)PERIPH_COUNT_IRQn) +#endif +#define VECTORTABLE_SIZE (NVIC_NUM_INTERRUPTS+16) +#define VECTORTABLE_ALIGNMENT (0x100ul) +#define NVIC_GET_ACTIVE(n) NVIC_GetActive((IRQn_Type)n) +#define NVIC_GET_PENDING(n) NVIC_GetPendingIRQ((IRQn_Type)n) +#define NVIC_SET_PENDING(n) NVIC_SetPendingIRQ((IRQn_Type)n) +#define NVIC_ENABLE_IRQ(n) NVIC_EnableIRQ((IRQn_Type)n) +#define NVIC_SET_PRIORITY(n ,p) NVIC_SetPriority((IRQn_Type)n, (uint32_t) p) +//extern "C" { +// extern uint32_t _VectorsRam[VECTORTABLE_SIZE] __attribute__((aligned(VECTORTABLE_ALIGNMENT))); +//} + +#ifndef SWI_IRQ_NUM +#if defined(__SAM3X8E__) && defined(_VARIANT_ARDUINO_DUE_X_) +// DUE +// Choices available: +// HSMCI_IRQn Multimedia Card Interface (HSMCI) +// EMAC_IRQn Ethernet MAC (EMAC) +// EMAC is not broken out on the official DUE, but is on clones. +// SPI0_IRQn Serial Peripheral Interface (SPI0) +// SPI0_IRQn seems to be the best choice, as long as nobody uses an ISR based master +#define SWI_IRQ_NUM SPI0_IRQn +#elif defined(ARDUINO_SAMD_ZERO) +// Just use sercom4's unused IRQ vector. +#define SWI_IRQ_NUM I2S_IRQn +//#define SWI_IRQ_NUM SERCOM4_IRQn +#endif +#endif + +#ifndef SWI_IRQ_NUM +#error SWI_IRQ_NUM not defined (CMSIS) +#endif + +#elif defined(CORE_TEENSY) + +#ifndef NVIC_GET_ACTIVE +#define NVIC_GET_ACTIVE(n) (*((volatile uint32_t *)0xE000E300 + ((n) >> 5)) & (1 << ((n) & 31))) +#endif +#ifndef NVIC_GET_PENDING +#define NVIC_GET_PENDING(n) (*((volatile uint32_t *)0xE000E200 + ((n) >> 5)) & (1 << ((n) & 31))) +#ifndef SWI_IRQ_NUM +#if defined(__MK20DX256__) +#define SWI_IRQ_NUM 17 +#elif defined(__MK20DX128__) +#define SWI_IRQ_NUM 5 +#elif defined(__MKL26Z64__) +#define SWI_IRQ_NUM 4 +#elif defined(__MK66FX1M0__) +#define SWI_IRQ_NUM 30 +#elif defined(__MK64FX512__) +#define SWI_IRQ_NUM 30 +#elif defined(__IMXRT1052__) || defined(__IMXRT1062__) +#define SWI_IRQ_NUM 71 +#else +#error Do not know how to relocate IRQ vectors for this pjrc product +#endif +#endif +#endif +#else // Not CMSIS or PJRC CORE_TEENSY or PIC32 or SPRESENSE +#error Do not know how to relocate IRQ vectors or perform SWI +#endif // SWI_IRQ_NUM + + +#ifndef SWI_IRQ_NUM +#error SWI_IRQ_NUM not defined +#else +/** + * Use this class to extend your class, in order to provide + * a C++ context callable SWI. + */ +class dyn_SWI { +public: + + /** + * Override this method with your code. + */ + virtual void dyn_SWISR(void) { + }; +}; + +extern int exec_SWI(const dyn_SWI* klass); + +#include "SWI_INLINE.h" + +// IMPORTANT! Define this so that you do NOT end up with a NULL stub! +#define SWI_NO_STUB +#endif /* SWI_IRQ_NUM */ +#endif /* __arm__ */ + +// if no SWI for CPU (e.g. AVR) make a void stub. +#ifndef SWI_NO_STUB +#define Init_dyn_SWI() (void(0)) +#if !defined(DDSB) +#define DDSB() (void(0)) +#endif +#endif +#endif /* DYN_SWI_H */ diff --git a/Marlin/src/sd/usb_flashdrive/usb-2.0-host-library-changes.patch b/Marlin/src/sd/usb_flashdrive/usb-2.0-host-library-changes.patch deleted file mode 100644 index c057aaba04d7..000000000000 --- a/Marlin/src/sd/usb_flashdrive/usb-2.0-host-library-changes.patch +++ /dev/null @@ -1,187 +0,0 @@ -diff -Naur /home/aleph/Downloads/USB_Host_Shield_2.0-master/masstorage.cpp lib/masstorage.cpp ---- /home/aleph/Downloads/USB_Host_Shield_2.0-master/masstorage.cpp 2018-09-21 10:19:36.107502252 -0600 -+++ lib/masstorage.cpp 2018-09-21 09:46:19.620175519 -0600 -@@ -24,6 +24,8 @@ - - #include "masstorage.h" - -+#if ENABLED(USB_FLASH_DRIVE_SUPPORT) -+ - const uint8_t BulkOnly::epDataInIndex = 1; - const uint8_t BulkOnly::epDataOutIndex = 2; - const uint8_t BulkOnly::epInterruptInIndex = 3; -@@ -796,6 +798,9 @@ - buf[i] = 0x00; - } - WriteOk[lun] = true; -+ #if ENABLED(USB_FLASH_DRIVE_SUPPORT) && defined(SKIP_WRITE_PROTECT) -+ return 0; -+ #endif - uint8_t rc = ModeSense6(lun, 0, 0x3f, 0, 192, buf); - if(!rc) { - WriteOk[lun] = ((buf[2] & 0x80) == 0); -@@ -1271,3 +1276,5 @@ - return MASS_ERR_NOT_IMPLEMENTED; - #endif - } -+ -+#endif // USB_FLASH_DRIVE_SUPPORT -\ No newline at end of file -diff -Naur /home/aleph/Downloads/USB_Host_Shield_2.0-master/message.cpp lib/message.cpp ---- /home/aleph/Downloads/USB_Host_Shield_2.0-master/message.cpp 2018-09-21 10:20:15.995647957 -0600 -+++ lib/message.cpp 2018-09-19 07:43:46.520339375 -0600 -@@ -23,6 +23,9 @@ - */ - - #include "Usb.h" -+ -+#if ENABLED(USB_FLASH_DRIVE_SUPPORT) -+ - // 0x80 is the default (i.e. trace) to turn off set this global to something lower. - // this allows for 126 other debugging levels. - // TO-DO: Allow assignment to a different serial port by software -@@ -120,4 +123,6 @@ - D_PrintHex (rcode, 0x80); - Notify(PSTR("\r\n"), 0x80); - } --#endif -+#endif // DEBUG_USB_HOST -+ -+#endif // USB_FLASH_DRIVE_SUPPORT -\ No newline at end of file -diff -Naur /home/aleph/Downloads/USB_Host_Shield_2.0-master/parsetools.cpp lib/parsetools.cpp ---- /home/aleph/Downloads/USB_Host_Shield_2.0-master/parsetools.cpp 2018-09-21 10:21:16.215867769 -0600 -+++ lib/parsetools.cpp 2018-09-19 07:43:46.520339375 -0600 -@@ -23,6 +23,8 @@ - */ - #include "Usb.h" - -+#if ENABLED(USB_FLASH_DRIVE_SUPPORT) -+ - bool MultiByteValueParser::Parse(uint8_t **pp, uint16_t *pcntdn) { - if(!pBuf) { - Notify(PSTR("Buffer pointer is NULL!\r\n"), 0x80); -@@ -72,3 +74,5 @@ - } - return true; - } -+ -+#endif // USB_FLASH_DRIVE_SUPPORT -\ No newline at end of file -diff -Naur /home/aleph/Downloads/USB_Host_Shield_2.0-master/settings.h lib/settings.h ---- /home/aleph/Downloads/USB_Host_Shield_2.0-master/settings.h 2018-09-21 10:22:21.792106872 -0600 -+++ lib/settings.h 2018-09-21 10:01:53.383594081 -0600 -@@ -25,7 +25,21 @@ - #ifndef USB_HOST_SHIELD_SETTINGS_H - #define USB_HOST_SHIELD_SETTINGS_H - #include "macros.h" -- -+#if ENABLED(USB_FLASH_DRIVE_SUPPORT) -+ //////////////////////////////////////////////////////////////////////////////// -+ /* Added by Bill Greiman to speed up mass storage initialization with USB -+ * flash drives and simple USB hard drives. -+ * Disable this by defining DELAY(x) to be delay(x). -+ */ -+ #define delay(x) if((x) < 200) safe_delay(x) -+ /* Almost all USB flash drives and simple USB hard drives fail the write -+ * protect test and add 20 - 30 seconds to USB init. Set SKIP_WRITE_PROTECT -+ * to nonzero to skip the test and assume the drive is writable. -+ */ -+ #define SKIP_WRITE_PROTECT 1 -+ /* Since Marlin only cares about USB flash drives, we only need one LUN. */ -+ #define MASS_MAX_SUPPORTED_LUN 1 -+#endif - //////////////////////////////////////////////////////////////////////////////// - // SPI Configuration - //////////////////////////////////////////////////////////////////////////////// -@@ -45,6 +59,10 @@ - * multiple serial ports are available. - * For example Serial3. - */ -+#if ENABLED(USB_FLASH_DRIVE_SUPPORT) -+ #define USB_HOST_SERIAL MYSERIAL0 -+#endif -+ - #ifndef USB_HOST_SERIAL - #define USB_HOST_SERIAL Serial - #endif -@@ -99,7 +117,7 @@ - // No user serviceable parts below this line. - // DO NOT change anything below here unless you are a developer! - --#include "version_helper.h" -+//#include "version_helper.h" - - #if defined(__GNUC__) && defined(__AVR__) - #ifndef GCC_VERSION -@@ -149,7 +167,6 @@ - #else - #define USING_SPI4TEENSY3 0 - #endif -- - #if ((defined(ARDUINO_SAM_DUE) && defined(__SAM3X8E__)) || defined(__ARDUINO_X86__) || ARDUINO >= 10600) && !USING_SPI4TEENSY3 - #include // Use the Arduino SPI library for the Arduino Due, Intel Galileo 1 & 2, Intel Edison or if the SPI library with transaction is available - #endif -diff -Naur /home/aleph/Downloads/USB_Host_Shield_2.0-master/UsbCore.h lib/UsbCore.h ---- /home/aleph/Downloads/USB_Host_Shield_2.0-master/UsbCore.h 2018-09-21 10:23:09.348280107 -0600 -+++ lib/UsbCore.h 2018-09-19 07:43:46.520339375 -0600 -@@ -32,7 +32,10 @@ - //#define USB_METHODS_INLINE - - /* shield pins. First parameter - SS pin, second parameter - INT pin */ --#ifdef BOARD_BLACK_WIDDOW -+ -+#if defined(__MARLIN_H__) -+typedef MAX3421e MAX3421E; // Marlin redefines this class in "../usb_host.h" -+#elif defined(BOARD_BLACK_WIDDOW) - typedef MAX3421e MAX3421E; // Black Widow - #elif defined(CORE_TEENSY) && (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)) - #if EXT_RAM -diff -Naur /home/aleph/Downloads/USB_Host_Shield_2.0-master/Usb.cpp lib/Usb.cpp ---- /home/aleph/Downloads/USB_Host_Shield_2.0-master/Usb.cpp 2018-09-21 10:23:20.732321559 -0600 -+++ lib/Usb.cpp 2018-09-19 07:43:46.520339375 -0600 -@@ -25,6 +25,8 @@ - - #include "Usb.h" - -+#if ENABLED(USB_FLASH_DRIVE_SUPPORT) -+ - static uint8_t usb_error = 0; - static uint8_t usb_task_state; - -@@ -825,3 +827,4 @@ - } - - #endif // defined(USB_METHODS_INLINE) -+#endif // USB_FLASH_DRIVE_SUPPORT -diff -Naur /home/aleph/Downloads/USB_Host_Shield_2.0-master/Usb.h lib/Usb.h ---- /home/aleph/Downloads/USB_Host_Shield_2.0-master/Usb.h 2018-09-21 10:23:33.756368972 -0600 -+++ lib/Usb.h 2018-09-19 07:43:46.520339375 -0600 -@@ -25,6 +25,8 @@ - #ifndef _usb_h_ - #define _usb_h_ - -+#include "../../../Marlin.h" -+ - // WARNING: Do not change the order of includes, or stuff will break! - #include - #include -@@ -34,13 +36,15 @@ - #include "settings.h" - #include "printhex.h" - #include "message.h" -+ - #include "hexdump.h" --#include "sink_parser.h" -+//#include "sink_parser.h" - #include "max3421e.h" - #include "address.h" --#include "avrpins.h" -+//#include "avrpins.h" - #include "usb_ch9.h" --#include "usbhost.h" -+//#include "usbhost.h" -+#include "../usb_host.h" - #include "UsbCore.h" - #include "parsetools.h" - #include "confdescparser.h" diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index b009eb612d95..68fb51ef5785 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index 6cda88c3dacc..1aa05c6033fb 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/ADIMLab/Granty/Configuration_adv.h b/config/examples/ADIMLab/Granty/Configuration_adv.h index 4a24df1379df..57381ccca5d9 100644 --- a/config/examples/ADIMLab/Granty/Configuration_adv.h +++ b/config/examples/ADIMLab/Granty/Configuration_adv.h @@ -1009,17 +1009,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h index a2db931168e1..368a080a85a4 100644 --- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h +++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index e6fd2a1ff07c..60e23ea93bc6 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -1021,17 +1021,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index 3b8cccb45f86..df0c07d21f44 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index d84a68a5b790..a7568ea856e5 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index d84a68a5b790..a7568ea856e5 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index a3e274c86553..798f624be83c 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index 03c6203d4b4f..e8659d29f1d4 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index 2ad71387cb86..8227546d9013 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Anet/E16/Configuration_adv.h b/config/examples/Anet/E16/Configuration_adv.h index 3ef6f157a23d..43e9c0090e10 100644 --- a/config/examples/Anet/E16/Configuration_adv.h +++ b/config/examples/Anet/E16/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index 8c347fa50ae9..ef2f999d41be 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index b1c278a3bef2..a88d637b7fda 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -1022,17 +1022,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index 04b8913ad20f..381852e994ae 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index 737d8b5b75eb..ae3a6d7366b2 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index 55725ab96851..db4807d53e69 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index 04a00c5a722a..7a6480f0e418 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -1026,17 +1026,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index 55725ab96851..db4807d53e69 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index bc13c8e35885..337b63889828 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Creality/CR-10/Configuration_adv.h b/config/examples/Creality/CR-10/Configuration_adv.h index 3007004a303a..62f257ff0ab4 100644 --- a/config/examples/Creality/CR-10/Configuration_adv.h +++ b/config/examples/Creality/CR-10/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Creality/CR-10S/Configuration_adv.h b/config/examples/Creality/CR-10S/Configuration_adv.h index 516e967b457c..89533ef2d52a 100644 --- a/config/examples/Creality/CR-10S/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Creality/CR-10_5S/Configuration_adv.h b/config/examples/Creality/CR-10_5S/Configuration_adv.h index bafd0a00f8e1..e00675b05ce2 100644 --- a/config/examples/Creality/CR-10_5S/Configuration_adv.h +++ b/config/examples/Creality/CR-10_5S/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Creality/CR-10mini/Configuration_adv.h b/config/examples/Creality/CR-10mini/Configuration_adv.h index 6ad33a18ea7a..8dc630623366 100644 --- a/config/examples/Creality/CR-10mini/Configuration_adv.h +++ b/config/examples/Creality/CR-10mini/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index 7bbe10b5bd12..573969de718e 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h index 63ad1b00c00c..e8bfc8f76c82 100644 --- a/config/examples/Creality/CR-20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index 6ddbd6351600..a4002e4947cd 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index 7d4da6d287cb..9403518cd181 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Creality/Ender-3/Configuration_adv.h b/config/examples/Creality/Ender-3/Configuration_adv.h index a40dfbb22b52..ac81f9b6d9af 100644 --- a/config/examples/Creality/Ender-3/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index 9b9a4dce4225..7e88ebee14de 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Creality/Ender-5/Configuration_adv.h b/config/examples/Creality/Ender-5/Configuration_adv.h index c8a5ba5e94e1..c7672093afd0 100644 --- a/config/examples/Creality/Ender-5/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index 9889528afa2d..7d18ac6a8c93 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h index b21f90225bce..8facf3aa2927 100755 --- a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h +++ b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index 6f3a97e28337..d2debef13e4a 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index b21a0b451720..eda4fd3c684a 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h index ab6e4c9b3ca8..2eba14fa2649 100644 --- a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h b/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h index fd78ee0bb8fc..25a8bc899c55 100644 --- a/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h @@ -1017,17 +1017,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h b/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h index 7c2aa57542a2..33d951513b5f 100644 --- a/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h @@ -1017,17 +1017,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/FYSETC/Cheetah/base/Configuration_adv.h b/config/examples/FYSETC/Cheetah/base/Configuration_adv.h index 7c2aa57542a2..33d951513b5f 100644 --- a/config/examples/FYSETC/Cheetah/base/Configuration_adv.h +++ b/config/examples/FYSETC/Cheetah/base/Configuration_adv.h @@ -1017,17 +1017,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Felix/Configuration_adv.h b/config/examples/Felix/Configuration_adv.h index 92016008be1e..7fc895782157 100644 --- a/config/examples/Felix/Configuration_adv.h +++ b/config/examples/Felix/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index 161382a49e15..0081f1dcdb1c 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -1017,17 +1017,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index 16df7bea45d4..652b41a64605 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index 5d48682fd7d5..e74e91886d3e 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index 8fe80b66d5bd..3217cf9482f7 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -1022,17 +1022,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h index 01657311a549..c1c7c0abef54 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -1022,17 +1022,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index 89483172a4f9..30b8da8d3b8e 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h index c049c7e244f3..3cc640bfe5bf 100644 --- a/config/examples/Geeetech/A10M/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index 31797fd3706d..b7dcd6de89a0 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index ceea59e853c9..ae04289c0df3 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index 89483172a4f9..30b8da8d3b8e 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index 89483172a4f9..30b8da8d3b8e 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index ac27d245777f..45adc41feec5 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -1002,17 +1002,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index bcedda43f985..0d2b25e150f0 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index 943e9c3a7716..b49d65be02ab 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -1023,17 +1023,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index 81a716012b97..04b3080790f2 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index 943e9c3a7716..b49d65be02ab 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -1023,17 +1023,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index 06c86f51e8c2..22b833e1471b 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index 512869baed83..08e487ebe483 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index 7a114194eb3b..95f2bcb5d0f4 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index fad464ffd72b..3d449173a5c2 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h index 7ae20a6509f8..0f49132df6a1 100644 --- a/config/examples/Mks/Robin/Configuration_adv.h +++ b/config/examples/Mks/Robin/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index 23fc1fe5a742..1c4e31b8fb77 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -1019,17 +1019,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index 564aeb7ce329..dd5fb7b475b5 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index 29beb2803dd1..216e357f9361 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/SCARA/Configuration_adv.h b/config/examples/SCARA/Configuration_adv.h index a5200942067e..786c180ce8d3 100644 --- a/config/examples/SCARA/Configuration_adv.h +++ b/config/examples/SCARA/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index 1d3b8b42aa91..419a42296e95 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h index aff0f69c41d9..43c7b60a06fb 100644 --- a/config/examples/Sanguinololu/Configuration_adv.h +++ b/config/examples/Sanguinololu/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index eb5261e5155a..1264dc55f1a1 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -1017,17 +1017,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h index 62650eeee9c4..edbe549bff3b 100755 --- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h @@ -1014,17 +1014,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index db6cec45cea5..7f355036a8c8 100755 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -1017,17 +1017,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h index db6cec45cea5..7f355036a8c8 100755 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h @@ -1017,17 +1017,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h index 3518468a1c52..cfe224af876e 100644 --- a/config/examples/TheBorg/Configuration_adv.h +++ b/config/examples/TheBorg/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index f7b23bf06049..68219cd50efe 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index c8f31e0ece82..c6f795b3b1f6 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h index bed7da7c92f2..1d407b1c1f60 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index 218f0536450e..aa57d5a92b97 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index 0fefd7fc8b8a..74146bfbf9de 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index 81db57b4edb5..ca39e948d9c6 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index 1aa12320881e..4ed328362a95 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -1031,17 +1031,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Velleman/K8400/Configuration_adv.h b/config/examples/Velleman/K8400/Configuration_adv.h index a8d998f0ed48..b384a353c8b6 100644 --- a/config/examples/Velleman/K8400/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index bb0d1f961d6d..483f05676637 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index 6c22876ce8f3..a1c17a103016 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -1020,17 +1020,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index fe8cc7bd0942..8bbd80ca3dea 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index e187a4ba03ea..5bb482ddfeed 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -1020,17 +1020,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index c6e1e8f84788..b7931315bd15 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -1020,17 +1020,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index c6e1e8f84788..b7931315bd15 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -1020,17 +1020,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index 5c90165a1561..d6f2d02e89a9 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -1020,17 +1020,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index 5c90165a1561..d6f2d02e89a9 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -1020,17 +1020,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index 14a8094d0400..1bf5db8d6bad 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -1020,17 +1020,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index ca81342379bf..44b3c7ee5539 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -1020,17 +1020,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index 9b38f3a0a994..47acc3558cab 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -1020,17 +1020,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index 6305d2ac6258..ad039f079303 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -1020,17 +1020,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index 14a8094d0400..1bf5db8d6bad 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -1020,17 +1020,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/delta/kossel_mini/Configuration_adv.h b/config/examples/delta/kossel_mini/Configuration_adv.h index 14a8094d0400..1bf5db8d6bad 100644 --- a/config/examples/delta/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/kossel_mini/Configuration_adv.h @@ -1020,17 +1020,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index 404101748985..54cf8ddfb4d4 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -1020,17 +1020,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index 433f2bb6ac67..f1d692b5490a 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index a49fe6d74914..4b263b4a96a8 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index cf59aa596129..e5fc720095be 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -1018,17 +1018,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** diff --git a/config/examples/wt150/Configuration_adv.h b/config/examples/wt150/Configuration_adv.h index d94bcc0bcb0f..a4f13609e091 100644 --- a/config/examples/wt150/Configuration_adv.h +++ b/config/examples/wt150/Configuration_adv.h @@ -1019,17 +1019,33 @@ * equivalent MAX3421E breakout board. The USB thumb drive will appear * to Marlin as an SD card. * - * The MAX3421E must be assigned the same pins as the SD card reader, with + * The MAX3421E can be assigned the same pins as the SD card reader, with * the following pin mapping: * * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN + * INT --> SD_DETECT_PIN [1] * SS --> SDSS + * + * [1] On AVR, it is recommended to use a pin capable of external + * interrupts for compatibility with UHS3. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_CS_PIN SDSS #define USB_INTR_PIN SD_DETECT_PIN + + // There are two versions of the USB Host Shield Library: + // + // - UHS2 does not use interrupts. The code is has been + // production tested on the LulzBot TAZ Pro with a + // 32-bit Archim board. + // + // - UHS3 requires USB_INTR_PIN to be interrupt-capable. + // It is newer code with better USB compatibility. But + // it is less tested and there are known interference + // between it and the servo motor code. + // + //#define USE_UHS3_USB #endif /** From 35314ac0f179a947146e19c302c7db8edabd7df3 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Wed, 21 Aug 2019 19:10:05 -0500 Subject: [PATCH 2/4] Apply some code spacing standards --- .../sd/usb_flashdrive/Sd2Card_FlashDrive.cpp | 42 +++++++++---------- 1 file changed, 19 insertions(+), 23 deletions(-) diff --git a/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.cpp b/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.cpp index 552b34bde6e3..a50d874eb057 100644 --- a/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.cpp +++ b/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.cpp @@ -112,7 +112,7 @@ static enum { #endif bool Sd2Card::usbStartup() { - if(state <= DO_STARTUP) { + if (state <= DO_STARTUP) { SERIAL_ECHOPGM("Starting USB host..."); if (!UHS_START) { SERIAL_ECHOLNPGM(" failed."); @@ -123,7 +123,7 @@ bool Sd2Card::usbStartup() { } // SPI quick test - check revision register - switch(usb.regRd(rREVISION)) { + switch (usb.regRd(rREVISION)) { case 0x01: SERIAL_ECHOLNPGM("rev.01 started"); break; case 0x12: SERIAL_ECHOLNPGM("rev.02 started"); break; case 0x13: SERIAL_ECHOLNPGM("rev.03 started"); break; @@ -145,12 +145,12 @@ void Sd2Card::idle() { const uint8_t task_state = usb.getUsbTaskState(); #if USB_DEBUG >= 2 - if(state > DO_STARTUP) { + if (state > DO_STARTUP) { static uint8_t laststate = 232; - if(task_state != laststate) { + if (task_state != laststate) { laststate = task_state; #define UHS_USB_DEBUG(x) case UHS_STATE(x): SERIAL_ECHOLNPGM(#x); break - switch(task_state) { + switch (task_state) { UHS_USB_DEBUG(IDLE); UHS_USB_DEBUG(RESET_DEVICE); UHS_USB_DEBUG(RESET_NOT_COMPLETE); @@ -171,12 +171,12 @@ void Sd2Card::idle() { static millis_t next_state_ms = millis(); - #define GOTO_STATE_AFTER_DELAY(STATE, DELAY) do {state = STATE; next_state_ms = millis() + DELAY; } while(0) + #define GOTO_STATE_AFTER_DELAY(STATE, DELAY) do{ state = STATE; next_state_ms = millis() + DELAY; }while(0) - if(ELAPSED(millis(), next_state_ms)) { + if (ELAPSED(millis(), next_state_ms)) { GOTO_STATE_AFTER_DELAY(state, 250); // Default delay - switch(state) { + switch (state) { case UNINITIALIZED: #ifndef MANUAL_USB_STARTUP @@ -184,12 +184,10 @@ void Sd2Card::idle() { #endif break; - case DO_STARTUP: - usbStartup(); - break; + case DO_STARTUP: usbStartup(); break; case WAIT_FOR_DEVICE: - if(task_state == UHS_STATE(RUNNING)) { + if (task_state == UHS_STATE(RUNNING)) { #if USB_DEBUG >= 1 SERIAL_ECHOLNPGM("USB device inserted"); #endif @@ -200,12 +198,13 @@ void Sd2Card::idle() { case WAIT_FOR_LUN: /* USB device is inserted, but if it is an SD card, * adapter it may not have an SD card in it yet. */ - if(bulk.LUNIsGood(0)) { + if (bulk.LUNIsGood(0)) { #if USB_DEBUG >= 1 SERIAL_ECHOLNPGM("LUN is good"); #endif GOTO_STATE_AFTER_DELAY( MEDIA_READY, 100 ); - } else { + } + else { #ifdef USB_HOST_MANUAL_POLL // Make sure we catch disconnect events usb.busprobe(); @@ -221,26 +220,23 @@ void Sd2Card::idle() { } break; - case MEDIA_READY: - break; - - case MEDIA_ERROR: - break; + case MEDIA_READY: break; + case MEDIA_ERROR: break; } - if(state > WAIT_FOR_DEVICE && task_state != UHS_STATE(RUNNING)) { + if (state > WAIT_FOR_DEVICE && task_state != UHS_STATE(RUNNING)) { // Handle device removal events #if USB_DEBUG >= 1 SERIAL_ECHOLNPGM("USB device removed"); #endif #if EITHER(ULTRA_LCD, EXTENSIBLE_UI) - if(state != MEDIA_READY) + if (state != MEDIA_READY) LCD_MESSAGEPGM("USB device removed"); #endif GOTO_STATE_AFTER_DELAY( WAIT_FOR_DEVICE, 0 ); } - else if(state > WAIT_FOR_LUN && !bulk.LUNIsGood(0)) { + else if (state > WAIT_FOR_LUN && !bulk.LUNIsGood(0)) { // Handle media removal events #if USB_DEBUG >= 1 SERIAL_ECHOLNPGM("Media removed"); @@ -251,7 +247,7 @@ void Sd2Card::idle() { GOTO_STATE_AFTER_DELAY( WAIT_FOR_DEVICE, 0 ); } - else if(task_state == UHS_STATE(ERROR)) { + else if (task_state == UHS_STATE(ERROR)) { #if EITHER(ULTRA_LCD, EXTENSIBLE_UI) LCD_MESSAGEPGM("Media read error"); #endif From 25f51344f89f7ff3d6327cf1315bad919c633bb2 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Wed, 21 Aug 2019 19:19:16 -0500 Subject: [PATCH 3/4] Update masstorage.cpp --- Marlin/src/sd/usb_flashdrive/lib-uhs2/masstorage.cpp | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs2/masstorage.cpp b/Marlin/src/sd/usb_flashdrive/lib-uhs2/masstorage.cpp index 5439423ee249..a57245f78a70 100644 --- a/Marlin/src/sd/usb_flashdrive/lib-uhs2/masstorage.cpp +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs2/masstorage.cpp @@ -762,7 +762,7 @@ uint8_t BulkOnly::Page3F(uint8_t lun) { buf[i] = 0x00; } WriteOk[lun] = true; - #if defined(SKIP_WRITE_PROTECT) + #ifdef SKIP_WRITE_PROTECT return 0; #endif uint8_t rc = ModeSense6(lun, 0, 0x3f, 0, 192, buf); From 39e5eeef295a246b49447b062e7a7e25d3e55148 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Fri, 23 Aug 2019 22:11:39 -0500 Subject: [PATCH 4/4] Tweak config commentary --- Marlin/Configuration_adv.h | 30 +++++++++---------- config/default/Configuration_adv.h | 30 +++++++++---------- .../3DFabXYZ/Migbot/Configuration_adv.h | 30 +++++++++---------- .../ADIMLab/Granty/Configuration_adv.h | 30 +++++++++---------- .../AlephObjects/TAZ4/Configuration_adv.h | 30 +++++++++---------- .../examples/Alfawise/U20/Configuration_adv.h | 30 +++++++++---------- .../AliExpress/UM2pExt/Configuration_adv.h | 30 +++++++++---------- config/examples/Anet/A2/Configuration_adv.h | 30 +++++++++---------- .../examples/Anet/A2plus/Configuration_adv.h | 30 +++++++++---------- config/examples/Anet/A6/Configuration_adv.h | 30 +++++++++---------- config/examples/Anet/A8/Configuration_adv.h | 30 +++++++++---------- .../examples/Anet/A8plus/Configuration_adv.h | 30 +++++++++---------- config/examples/Anet/E16/Configuration_adv.h | 30 +++++++++---------- .../examples/AnyCubic/i3/Configuration_adv.h | 30 +++++++++---------- config/examples/ArmEd/Configuration_adv.h | 30 +++++++++---------- .../BIBO/TouchX/cyclops/Configuration_adv.h | 30 +++++++++---------- .../BIBO/TouchX/default/Configuration_adv.h | 30 +++++++++---------- .../examples/BQ/Hephestos/Configuration_adv.h | 30 +++++++++---------- .../BQ/Hephestos_2/Configuration_adv.h | 30 +++++++++---------- config/examples/BQ/WITBOX/Configuration_adv.h | 30 +++++++++---------- config/examples/Cartesio/Configuration_adv.h | 30 +++++++++---------- .../Creality/CR-10/Configuration_adv.h | 30 +++++++++---------- .../Creality/CR-10S/Configuration_adv.h | 30 +++++++++---------- .../Creality/CR-10_5S/Configuration_adv.h | 30 +++++++++---------- .../Creality/CR-10mini/Configuration_adv.h | 30 +++++++++---------- .../Creality/CR-20 Pro/Configuration_adv.h | 30 +++++++++---------- .../Creality/CR-20/Configuration_adv.h | 30 +++++++++---------- .../Creality/CR-8/Configuration_adv.h | 30 +++++++++---------- .../Creality/Ender-2/Configuration_adv.h | 30 +++++++++---------- .../Creality/Ender-3/Configuration_adv.h | 30 +++++++++---------- .../Creality/Ender-4/Configuration_adv.h | 30 +++++++++---------- .../Creality/Ender-5/Configuration_adv.h | 30 +++++++++---------- .../Dagoma/Disco Ultimate/Configuration_adv.h | 30 +++++++++---------- .../Sidewinder X1/Configuration_adv.h | 30 +++++++++---------- .../examples/Einstart-S/Configuration_adv.h | 30 +++++++++---------- .../FYSETC/AIO_II/Configuration_adv.h | 30 +++++++++---------- .../Cheetah 1.2/BLTouch/Configuration_adv.h | 30 +++++++++---------- .../Cheetah 1.2/base/Configuration_adv.h | 30 +++++++++---------- .../Cheetah/BLTouch/Configuration_adv.h | 30 +++++++++---------- .../FYSETC/Cheetah/base/Configuration_adv.h | 30 +++++++++---------- .../examples/FYSETC/F6_13/Configuration_adv.h | 4 +-- config/examples/Felix/Configuration_adv.h | 30 +++++++++---------- .../FlashForge/CreatorPro/Configuration_adv.h | 30 +++++++++---------- .../FolgerTech/i3-2020/Configuration_adv.h | 30 +++++++++---------- .../Formbot/Raptor/Configuration_adv.h | 30 +++++++++---------- .../Formbot/T_Rex_2+/Configuration_adv.h | 30 +++++++++---------- .../Formbot/T_Rex_3/Configuration_adv.h | 30 +++++++++---------- .../examples/Geeetech/A10/Configuration_adv.h | 30 +++++++++---------- .../Geeetech/A10M/Configuration_adv.h | 30 +++++++++---------- .../Geeetech/A20M/Configuration_adv.h | 30 +++++++++---------- .../Geeetech/MeCreator2/Configuration_adv.h | 30 +++++++++---------- .../Prusa i3 Pro C/Configuration_adv.h | 30 +++++++++---------- .../Prusa i3 Pro W/Configuration_adv.h | 30 +++++++++---------- config/examples/HMS434/Configuration_adv.h | 30 +++++++++---------- .../Infitary/i3-M508/Configuration_adv.h | 30 +++++++++---------- .../examples/JGAurora/A1/Configuration_adv.h | 30 +++++++++---------- .../examples/JGAurora/A5/Configuration_adv.h | 30 +++++++++---------- .../examples/JGAurora/A5S/Configuration_adv.h | 30 +++++++++---------- .../examples/MakerParts/Configuration_adv.h | 30 +++++++++---------- .../examples/Malyan/M150/Configuration_adv.h | 30 +++++++++---------- .../examples/Malyan/M200/Configuration_adv.h | 30 +++++++++---------- .../Micromake/C1/enhanced/Configuration_adv.h | 30 +++++++++---------- config/examples/Mks/Robin/Configuration_adv.h | 30 +++++++++---------- config/examples/Mks/Sbase/Configuration_adv.h | 30 +++++++++---------- .../RapideLite/RL200/Configuration_adv.h | 30 +++++++++---------- config/examples/RigidBot/Configuration_adv.h | 30 +++++++++---------- config/examples/SCARA/Configuration_adv.h | 30 +++++++++---------- .../Black_STM32F407VET6/Configuration_adv.h | 30 +++++++++---------- .../examples/Sanguinololu/Configuration_adv.h | 30 +++++++++---------- .../Tevo/Michelangelo/Configuration_adv.h | 30 +++++++++---------- .../Tevo/Tarantula Pro/Configuration_adv.h | 30 +++++++++---------- .../Tornado/V1 (MKS Base)/Configuration_adv.h | 30 +++++++++---------- .../V2 (MKS GEN-L)/Configuration_adv.h | 30 +++++++++---------- config/examples/TheBorg/Configuration_adv.h | 30 +++++++++---------- config/examples/TinyBoy2/Configuration_adv.h | 30 +++++++++---------- .../examples/Tronxy/X3A/Configuration_adv.h | 30 +++++++++---------- .../Tronxy/X5S-2E/Configuration_adv.h | 30 +++++++++---------- .../UltiMachine/Archim1/Configuration_adv.h | 30 +++++++++---------- .../UltiMachine/Archim2/Configuration_adv.h | 30 +++++++++---------- .../examples/VORONDesign/Configuration_adv.h | 30 +++++++++---------- .../Velleman/K8200/Configuration_adv.h | 30 +++++++++---------- .../Velleman/K8400/Configuration_adv.h | 30 +++++++++---------- .../WASP/PowerWASP/Configuration_adv.h | 30 +++++++++---------- .../Wanhao/Duplicator 6/Configuration_adv.h | 30 +++++++++---------- .../Duplicator i3 Mini/Configuration_adv.h | 30 +++++++++---------- .../delta/Anycubic/Kossel/Configuration_adv.h | 30 +++++++++---------- .../Dreammaker/Overlord/Configuration_adv.h | 30 +++++++++---------- .../Overlord_Pro/Configuration_adv.h | 30 +++++++++---------- .../FLSUN/auto_calibrate/Configuration_adv.h | 30 +++++++++---------- .../delta/FLSUN/kossel/Configuration_adv.h | 30 +++++++++---------- .../FLSUN/kossel_mini/Configuration_adv.h | 30 +++++++++---------- .../Geeetech/Rostock 301/Configuration_adv.h | 30 +++++++++---------- .../delta/MKS/SBASE/Configuration_adv.h | 30 +++++++++---------- .../Tevo Little Monster/Configuration_adv.h | 30 +++++++++---------- .../delta/generic/Configuration_adv.h | 30 +++++++++---------- .../delta/kossel_mini/Configuration_adv.h | 30 +++++++++---------- .../delta/kossel_xl/Configuration_adv.h | 30 +++++++++---------- .../gCreate/gMax1.5+/Configuration_adv.h | 30 +++++++++---------- config/examples/makibox/Configuration_adv.h | 30 +++++++++---------- .../tvrrug/Round2/Configuration_adv.h | 30 +++++++++---------- config/examples/wt150/Configuration_adv.h | 30 +++++++++---------- 101 files changed, 1402 insertions(+), 1602 deletions(-) diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 68fb51ef5785..babbb01bc67f 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index 68fb51ef5785..babbb01bc67f 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index 1aa05c6033fb..ee2be969aa2e 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/ADIMLab/Granty/Configuration_adv.h b/config/examples/ADIMLab/Granty/Configuration_adv.h index 57381ccca5d9..7945eb37e675 100644 --- a/config/examples/ADIMLab/Granty/Configuration_adv.h +++ b/config/examples/ADIMLab/Granty/Configuration_adv.h @@ -1016,25 +1016,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is required for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h index 368a080a85a4..fe2011e1ccd2 100644 --- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h +++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index 60e23ea93bc6..b52184f43006 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -1028,25 +1028,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index df0c07d21f44..e52af82287b5 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index a7568ea856e5..58b94932d215 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index a7568ea856e5..58b94932d215 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index 798f624be83c..c0430d7c0617 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index e8659d29f1d4..c5862c1c73ef 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index 8227546d9013..1cb72e327e84 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Anet/E16/Configuration_adv.h b/config/examples/Anet/E16/Configuration_adv.h index 43e9c0090e10..e0f4e74cfc24 100644 --- a/config/examples/Anet/E16/Configuration_adv.h +++ b/config/examples/Anet/E16/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index ef2f999d41be..b76cceeeb93e 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index a88d637b7fda..29a1e932da54 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -1029,25 +1029,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index 381852e994ae..c995f9851b86 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index ae3a6d7366b2..91d2deac0b0b 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index db4807d53e69..46ba6804ee70 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index 7a6480f0e418..cfe9262c42fc 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -1033,25 +1033,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index db4807d53e69..46ba6804ee70 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index 337b63889828..19648b827548 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Creality/CR-10/Configuration_adv.h b/config/examples/Creality/CR-10/Configuration_adv.h index 62f257ff0ab4..9c3063708395 100644 --- a/config/examples/Creality/CR-10/Configuration_adv.h +++ b/config/examples/Creality/CR-10/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Creality/CR-10S/Configuration_adv.h b/config/examples/Creality/CR-10S/Configuration_adv.h index 89533ef2d52a..e9a2f7f1ed77 100644 --- a/config/examples/Creality/CR-10S/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Creality/CR-10_5S/Configuration_adv.h b/config/examples/Creality/CR-10_5S/Configuration_adv.h index e00675b05ce2..93fcb4ec35e4 100644 --- a/config/examples/Creality/CR-10_5S/Configuration_adv.h +++ b/config/examples/Creality/CR-10_5S/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Creality/CR-10mini/Configuration_adv.h b/config/examples/Creality/CR-10mini/Configuration_adv.h index 8dc630623366..83594ae44355 100644 --- a/config/examples/Creality/CR-10mini/Configuration_adv.h +++ b/config/examples/Creality/CR-10mini/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index 573969de718e..2b8c08d7d5d7 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h index e8bfc8f76c82..3a9f4efba2a5 100644 --- a/config/examples/Creality/CR-20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index a4002e4947cd..97774cb707f4 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index 9403518cd181..90d8f1b90efa 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Creality/Ender-3/Configuration_adv.h b/config/examples/Creality/Ender-3/Configuration_adv.h index ac81f9b6d9af..e942cfdf1342 100644 --- a/config/examples/Creality/Ender-3/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index 7e88ebee14de..eca3601f9754 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Creality/Ender-5/Configuration_adv.h b/config/examples/Creality/Ender-5/Configuration_adv.h index c7672093afd0..3cb1d6e17c8d 100644 --- a/config/examples/Creality/Ender-5/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index 7d18ac6a8c93..23df5cf5e484 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h index 8facf3aa2927..6949849a15c3 100755 --- a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h +++ b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index d2debef13e4a..b39d4379fcd5 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index eda4fd3c684a..74d3bb07400a 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h index 2eba14fa2649..2baa24b71451 100644 --- a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h b/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h index 25a8bc899c55..b31037b2a1dc 100644 --- a/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h @@ -1024,25 +1024,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h b/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h index 33d951513b5f..b4ecd5e18313 100644 --- a/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h @@ -1024,25 +1024,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/FYSETC/Cheetah/base/Configuration_adv.h b/config/examples/FYSETC/Cheetah/base/Configuration_adv.h index 33d951513b5f..b4ecd5e18313 100644 --- a/config/examples/FYSETC/Cheetah/base/Configuration_adv.h +++ b/config/examples/FYSETC/Cheetah/base/Configuration_adv.h @@ -1024,25 +1024,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index 93e544e32c20..9296889f372c 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -1027,8 +1027,8 @@ */ #define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN #endif /** diff --git a/config/examples/Felix/Configuration_adv.h b/config/examples/Felix/Configuration_adv.h index 7fc895782157..c5cd162eeadd 100644 --- a/config/examples/Felix/Configuration_adv.h +++ b/config/examples/Felix/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index 0081f1dcdb1c..9cb9e60246a7 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -1024,25 +1024,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index 652b41a64605..316ad00f01d6 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index e74e91886d3e..25e27512f470 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index 3217cf9482f7..73c9d8483500 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -1029,25 +1029,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h index c1c7c0abef54..6b7b941d53c1 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -1029,25 +1029,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index 30b8da8d3b8e..df66df91bb1b 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h index 3cc640bfe5bf..674a51d385c6 100644 --- a/config/examples/Geeetech/A10M/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index b7dcd6de89a0..5434700c97e5 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index ae04289c0df3..2f7eb338a166 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index 30b8da8d3b8e..df66df91bb1b 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index 30b8da8d3b8e..df66df91bb1b 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index 45adc41feec5..ec050ae2f451 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -1009,25 +1009,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index 0d2b25e150f0..076ab02a18ac 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index b49d65be02ab..0b9e55ff1a32 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -1030,25 +1030,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index 04b3080790f2..33a158320a29 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index b49d65be02ab..0b9e55ff1a32 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -1030,25 +1030,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index 22b833e1471b..80538843b59d 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index 08e487ebe483..8db61b98ad94 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index 95f2bcb5d0f4..70e3133930fc 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index 3d449173a5c2..a32c25d12623 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h index 0f49132df6a1..d1135d52b52f 100644 --- a/config/examples/Mks/Robin/Configuration_adv.h +++ b/config/examples/Mks/Robin/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index 1c4e31b8fb77..91f3777c79c1 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -1026,25 +1026,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index dd5fb7b475b5..b1dba7ca4607 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index 216e357f9361..dd0bd4444f74 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/SCARA/Configuration_adv.h b/config/examples/SCARA/Configuration_adv.h index 786c180ce8d3..2336d66083de 100644 --- a/config/examples/SCARA/Configuration_adv.h +++ b/config/examples/SCARA/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index 419a42296e95..ad929f77442f 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h index 43c7b60a06fb..d9ef33b1e0bb 100644 --- a/config/examples/Sanguinololu/Configuration_adv.h +++ b/config/examples/Sanguinololu/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index 1264dc55f1a1..d26f5fda9ea8 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -1024,25 +1024,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h index edbe549bff3b..0864046d73fd 100755 --- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h @@ -1021,25 +1021,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index 7f355036a8c8..0cb2d8fb2e9b 100755 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -1024,25 +1024,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h index 7f355036a8c8..0cb2d8fb2e9b 100755 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h @@ -1024,25 +1024,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h index cfe224af876e..3b9ca36c610a 100644 --- a/config/examples/TheBorg/Configuration_adv.h +++ b/config/examples/TheBorg/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index 68219cd50efe..cd3684bc7abe 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index c6f795b3b1f6..c1e03f0f8c06 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h index 1d407b1c1f60..dcdbf95edc3b 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index aa57d5a92b97..a9c51d51e759 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index 74146bfbf9de..5383534c8619 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index ca39e948d9c6..d699fc614442 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index 4ed328362a95..b67dc5260655 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -1038,25 +1038,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Velleman/K8400/Configuration_adv.h b/config/examples/Velleman/K8400/Configuration_adv.h index b384a353c8b6..2d964b5dcc71 100644 --- a/config/examples/Velleman/K8400/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index 483f05676637..dd4bea7b4bf3 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index a1c17a103016..765e3f554ddd 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -1027,25 +1027,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index 8bbd80ca3dea..b5b435f95139 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index 5bb482ddfeed..8c1f9fae1302 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -1027,25 +1027,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index b7931315bd15..fb103482be9f 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -1027,25 +1027,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index b7931315bd15..fb103482be9f 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -1027,25 +1027,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index d6f2d02e89a9..b73456c9cef5 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -1027,25 +1027,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index d6f2d02e89a9..b73456c9cef5 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -1027,25 +1027,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index 1bf5db8d6bad..1eea55bb4670 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -1027,25 +1027,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index 44b3c7ee5539..906f031251d7 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -1027,25 +1027,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index 47acc3558cab..0abda20c74a8 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -1027,25 +1027,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index ad039f079303..a8a34066f9c2 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -1027,25 +1027,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index 1bf5db8d6bad..1eea55bb4670 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -1027,25 +1027,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/delta/kossel_mini/Configuration_adv.h b/config/examples/delta/kossel_mini/Configuration_adv.h index 1bf5db8d6bad..1eea55bb4670 100644 --- a/config/examples/delta/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/kossel_mini/Configuration_adv.h @@ -1027,25 +1027,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index 54cf8ddfb4d4..85bbb0a6055e 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -1027,25 +1027,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index f1d692b5490a..7dbe8c25e821 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index 4b263b4a96a8..9f250a0c4edb 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index e5fc720095be..691d33dcea54 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -1025,25 +1025,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif diff --git a/config/examples/wt150/Configuration_adv.h b/config/examples/wt150/Configuration_adv.h index a4f13609e091..9047215a86a6 100644 --- a/config/examples/wt150/Configuration_adv.h +++ b/config/examples/wt150/Configuration_adv.h @@ -1026,25 +1026,23 @@ * INT --> SD_DETECT_PIN [1] * SS --> SDSS * - * [1] On AVR, it is recommended to use a pin capable of external - * interrupts for compatibility with UHS3. + * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ //#define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - // There are two versions of the USB Host Shield Library: - // - // - UHS2 does not use interrupts. The code is has been - // production tested on the LulzBot TAZ Pro with a - // 32-bit Archim board. - // - // - UHS3 requires USB_INTR_PIN to be interrupt-capable. - // It is newer code with better USB compatibility. But - // it is less tested and there are known interference - // between it and the servo motor code. - // + #define USB_CS_PIN SDSS + #define USB_INTR_PIN SD_DETECT_PIN + + /** + * USB Host Shield Library + * + * - UHS2 uses no interrupts and has been production-tested + * on a LulzBot TAZ Pro with a 32-bit Archim board. + * + * - UHS3 is newer code with better USB compatibility. But it + * is less tested and is known to interfere with Servos. + * [1] This requires USB_INTR_PIN to be interrupt-capable. + */ //#define USE_UHS3_USB #endif