diff --git a/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h b/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h
index e99c15e70e99..f37028f15a65 100644
--- a/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h
+++ b/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h
@@ -182,13 +182,13 @@
 #endif
 
 /**
- *                  _____
- *              5V | 1 2 | GND
- *  (LCD_EN) P0_18 | 3 4 | P0_17 (LCD_RS)
- *  (LCD_D4) P0_15 | 5 6   P0_20 (BTN_EN2)
- *           RESET | 7 8 | P0_19 (BTN_EN1)
- * (BTN_ENC) P0_16 | 9 10| P2_08 (BEEPER)
- *                  -----
+ *                  ______
+ *              5V | 1  2 | GND
+ *  (LCD_EN) P0_18 | 3  4 | P0_17 (LCD_RS)
+ *  (LCD_D4) P0_15 | 5  6   P0_20 (BTN_EN2)
+ *           RESET | 7  8 | P0_19 (BTN_EN1)
+ * (BTN_ENC) P0_16 | 9 10 | P2_08 (BEEPER)
+ *                  ------
  *                   EXP
  */
 
@@ -204,6 +204,17 @@
 #if ENABLED(DWIN_CREALITY_LCD)
   #error "DWIN_CREALITY_LCD requires a custom cable with TX = P0_15, RX = P0_16. Comment out this line to continue."
 
+ /** 
+  *          Ender 3 V2 display                       SKR E3 Turbo (EXP1)                Ender 3 V2 display --> SKR E3 Turbo 
+  *                ______                                     ______                                  RX  8 -->  5  P0_15
+  *            5V | 1  2 | GND                            5V | 1  2 | GND                             TX  7 -->  9  P0_16
+  *   (BTN_E1)  A | 3  4 | B   (BTN_E2)       (LCD_EN) P0_18 | 3  4 | P0_17 (LCD_RS)              BEEPER  5 --> 10  P2_08
+  *        BEEPER | 5  6   ENT (BTN_ENC)      (LCD_D4) P0_15 | 5  6   P0_20 (BTN_EN2)
+  *  (SKR_RX1) TX | 7  8 | RX  (SKR_TX1)               Reset | 7  8 | P0_19 (BTN_EN1)
+  *            NC | 9 10 | NC                (BTN_ENC) P0_16 | 9 10 | P2_08 (BEEPER)
+  *                ------					                            ------
+  */
+
   #define BEEPER_PIN                 EXP1_10_PIN
   #define BTN_EN1                    EXP1_03_PIN
   #define BTN_EN2                    EXP1_04_PIN