diff --git a/Marlin/src/module/temperature.cpp b/Marlin/src/module/temperature.cpp index 2f1a54e91dc74..72d801652f6fa 100644 --- a/Marlin/src/module/temperature.cpp +++ b/Marlin/src/module/temperature.cpp @@ -576,8 +576,7 @@ volatile bool Temperature::raw_temps_ready = false; const millis_t ms = millis(); - if (raw_temps_ready) { // temp sample ready - updateTemperaturesFromRawValues(); + if (updateTemperaturesIfReady()) { // temp sample ready // Get the current temperature and constrain it current_temp = GHV(degChamber(), degBed(), degHotend(heater_id)); @@ -1212,9 +1211,7 @@ void Temperature::manage_heater() { } #endif - if (!raw_temps_ready) return; - - updateTemperaturesFromRawValues(); // also resets the watchdog + if (!updateTemperaturesIfReady()) return; // Will also reset the watchdog if temperatures are ready #if DISABLED(IGNORE_THERMOCOUPLE_ERRORS) #if TEMP_SENSOR_0_IS_MAX_TC @@ -1890,29 +1887,88 @@ void Temperature::manage_heater() { #endif // HAS_TEMP_PROBE /** - * Get the raw values into the actual temperatures. - * The raw values are created in interrupt context, - * and this function is called from normal context - * as it would block the stepper routine. + * Convert the raw sensor readings into actual Celsius temperatures and + * validate raw temperatures. Bad readings generate min/maxtemp errors. + * + * The raw values are generated entirely in interrupt context, and this + * method is called from normal context once 'raw_temps_ready' has been + * set by update_raw_temperatures(). + * + * The watchdog is dependent on this method. If 'raw_temps_ready' stops + * being set by the interrupt so that this method is not called for over + * 4 seconds then something has gone afoul and the machine will be reset. */ void Temperature::updateTemperaturesFromRawValues() { + + watchdog_refresh(); // Reset because raw_temps_ready was set by the interrupt + TERN_(TEMP_SENSOR_0_IS_MAX_TC, temp_hotend[0].raw = READ_MAX_TC(0)); TERN_(TEMP_SENSOR_1_IS_MAX_TC, TERN(TEMP_SENSOR_1_AS_REDUNDANT, temp_redundant, temp_hotend[1]).raw = READ_MAX_TC(1)); #if HAS_HOTEND HOTEND_LOOP() temp_hotend[e].celsius = analog_to_celsius_hotend(temp_hotend[e].raw, e); #endif TERN_(TEMP_SENSOR_1_AS_REDUNDANT, temp_redundant.celsius = analog_to_celsius_hotend(temp_redundant.raw, 1)); - TERN_(HAS_HEATED_BED, temp_bed.celsius = analog_to_celsius_bed(temp_bed.raw)); + + TERN_(HAS_HEATED_BED, temp_bed.celsius = analog_to_celsius_bed(temp_bed.raw)); TERN_(HAS_TEMP_CHAMBER, temp_chamber.celsius = analog_to_celsius_chamber(temp_chamber.raw)); - TERN_(HAS_TEMP_COOLER, temp_cooler.celsius = analog_to_celsius_cooler(temp_cooler.raw)); - TERN_(HAS_TEMP_PROBE, temp_probe.celsius = analog_to_celsius_probe(temp_probe.raw)); + TERN_(HAS_TEMP_COOLER, temp_cooler.celsius = analog_to_celsius_cooler(temp_cooler.raw)); + TERN_(HAS_TEMP_PROBE, temp_probe.celsius = analog_to_celsius_probe(temp_probe.raw)); + TERN_(FILAMENT_WIDTH_SENSOR, filwidth.update_measured_mm()); - TERN_(HAS_POWER_MONITOR, power_monitor.capture_values()); + TERN_(HAS_POWER_MONITOR, power_monitor.capture_values()); - // Reset the watchdog on good temperature measurement - watchdog_refresh(); + #if HAS_HOTEND + + static constexpr int8_t temp_dir[] = { + TERN(TEMP_SENSOR_0_IS_MAX_TC, 0, TEMPDIR(0)) + #if HAS_MULTI_HOTEND + , TERN(TEMP_SENSOR_1_IS_MAX_TC, 0, TEMPDIR(1)) + #if HOTENDS > 2 + #define _TEMPDIR(N) , TEMPDIR(N) + REPEAT_S(2, HOTENDS, _TEMPDIR) + #endif + #endif + }; + + LOOP_L_N(e, COUNT(temp_dir)) { + const int8_t tdir = temp_dir[e]; + if (tdir) { + const int16_t rawtemp = temp_hotend[e].raw * tdir; // normal direction, +rawtemp, else -rawtemp + if (rawtemp > temp_range[e].raw_max * tdir) max_temp_error((heater_id_t)e); - raw_temps_ready = false; + const bool heater_on = temp_hotend[e].target > 0; + if (heater_on && rawtemp < temp_range[e].raw_min * tdir && !is_preheating(e)) { + #if MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED > 1 + if (++consecutive_low_temperature_error[e] >= MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED) + #endif + min_temp_error((heater_id_t)e); + } + #if MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED > 1 + else + consecutive_low_temperature_error[e] = 0; + #endif + } + } + + #endif // HAS_HOTEND + + #if ENABLED(THERMAL_PROTECTION_BED) + #define BEDCMP(A,B) (TEMPDIR(BED) < 0 ? ((A)<(B)) : ((A)>(B))) + if (BEDCMP(temp_bed.raw, maxtemp_raw_BED)) max_temp_error(H_BED); + if (temp_bed.target > 0 && BEDCMP(mintemp_raw_BED, temp_bed.raw)) min_temp_error(H_BED); + #endif + + #if BOTH(HAS_HEATED_CHAMBER, THERMAL_PROTECTION_CHAMBER) + #define CHAMBERCMP(A,B) (TEMPDIR(CHAMBER) < 0 ? ((A)<(B)) : ((A)>(B))) + if (CHAMBERCMP(temp_chamber.raw, maxtemp_raw_CHAMBER)) max_temp_error(H_CHAMBER); + if (temp_chamber.target > 0 && CHAMBERCMP(mintemp_raw_CHAMBER, temp_chamber.raw)) min_temp_error(H_CHAMBER); + #endif + + #if BOTH(HAS_COOLER, THERMAL_PROTECTION_COOLER) + #define COOLERCMP(A,B) (TEMPDIR(COOLER) < 0 ? ((A)<(B)) : ((A)>(B))) + if (cutter.unitPower > 0 && COOLERCMP(temp_cooler.raw, maxtemp_raw_COOLER)) max_temp_error(H_COOLER); + if (COOLERCMP(mintemp_raw_COOLER, temp_cooler.raw)) min_temp_error(H_COOLER); + #endif } #if THERMO_SEPARATE_SPI @@ -2657,6 +2713,9 @@ void Temperature::disable_all_heaters() { /** * Update raw temperatures + * + * Called by ISR => readings_ready when new temperatures have been set by updateTemperaturesFromRawValues. + * Applies all the accumulators to the current raw temperatures. */ void Temperature::update_raw_temperatures() { @@ -2686,14 +2745,19 @@ void Temperature::update_raw_temperatures() { TERN_(HAS_JOY_ADC_X, joystick.x.update()); TERN_(HAS_JOY_ADC_Y, joystick.y.update()); TERN_(HAS_JOY_ADC_Z, joystick.z.update()); - - raw_temps_ready = true; } +/** + * Called by the Temperature ISR when all the ADCs have been processed. + * Reset all the ADC accumulators for another round of updates. + */ void Temperature::readings_ready() { - // Update the raw values if they've been read. Else we could be updating them during reading. - if (!raw_temps_ready) update_raw_temperatures(); + // Update raw values only if they're not already set. + if (!raw_temps_ready) { + update_raw_temperatures(); + raw_temps_ready = true; + } // Filament Sensor - can be read any time since IIR filtering is used TERN_(FILAMENT_WIDTH_SENSOR, filwidth.reading_ready()); @@ -2711,75 +2775,6 @@ void Temperature::readings_ready() { TERN_(HAS_JOY_ADC_X, joystick.x.reset()); TERN_(HAS_JOY_ADC_Y, joystick.y.reset()); TERN_(HAS_JOY_ADC_Z, joystick.z.reset()); - - #if HAS_HOTEND - - static constexpr int8_t temp_dir[] = { - TERN(TEMP_SENSOR_0_IS_MAX_TC, 0, TEMPDIR(0)) - #if HAS_MULTI_HOTEND - , TERN(TEMP_SENSOR_1_IS_MAX_TC, 0, TEMPDIR(1)) - #if HOTENDS > 2 - #define _TEMPDIR(N) , TEMPDIR(N) - REPEAT_S(2, HOTENDS, _TEMPDIR) - #endif - #endif - }; - - LOOP_L_N(e, COUNT(temp_dir)) { - const int8_t tdir = temp_dir[e]; - if (tdir) { - const int16_t rawtemp = temp_hotend[e].raw * tdir; // normal direction, +rawtemp, else -rawtemp - if (rawtemp > temp_range[e].raw_max * tdir) max_temp_error((heater_id_t)e); - - const bool heater_on = (temp_hotend[e].target > 0 || TERN0(PIDTEMP, temp_hotend[e].soft_pwm_amount > 0)); - if (heater_on && rawtemp < temp_range[e].raw_min * tdir && !is_preheating(e)) { - #if MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED > 1 - if (++consecutive_low_temperature_error[e] >= MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED) - #endif - min_temp_error((heater_id_t)e); - } - #if MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED > 1 - else - consecutive_low_temperature_error[e] = 0; - #endif - } - } - - #endif // HAS_HOTEND - - #if ENABLED(THERMAL_PROTECTION_BED) - #if TEMPDIR(BED) < 0 - #define BEDCMP(A,B) ((A)<(B)) - #else - #define BEDCMP(A,B) ((A)>(B)) - #endif - const bool bed_on = (temp_bed.target > 0) || TERN0(PIDTEMPBED, temp_bed.soft_pwm_amount > 0); - if (BEDCMP(temp_bed.raw, maxtemp_raw_BED)) max_temp_error(H_BED); - if (bed_on && BEDCMP(mintemp_raw_BED, temp_bed.raw)) min_temp_error(H_BED); - #endif - - #if BOTH(HAS_HEATED_CHAMBER, THERMAL_PROTECTION_CHAMBER) - #if TEMPDIR(CHAMBER) < 0 - #define CHAMBERCMP(A,B) ((A)<(B)) - #else - #define CHAMBERCMP(A,B) ((A)>(B)) - #endif - const bool chamber_on = (temp_chamber.target > 0); - if (CHAMBERCMP(temp_chamber.raw, maxtemp_raw_CHAMBER)) max_temp_error(H_CHAMBER); - if (chamber_on && CHAMBERCMP(mintemp_raw_CHAMBER, temp_chamber.raw)) min_temp_error(H_CHAMBER); - #endif - - #if BOTH(HAS_COOLER, THERMAL_PROTECTION_COOLER) - #if TEMPDIR(COOLER) < 0 - #define COOLERCMP(A,B) ((A)<(B)) - #else - #define COOLERCMP(A,B) ((A)>(B)) - #endif - if (cutter.unitPower > 0) { - if (COOLERCMP(temp_cooler.raw, maxtemp_raw_COOLER)) max_temp_error(H_COOLER); - } - if (COOLERCMP(mintemp_raw_COOLER, temp_cooler.raw)) min_temp_error(H_COOLER); - #endif } /** diff --git a/Marlin/src/module/temperature.h b/Marlin/src/module/temperature.h index 96ff8b58955d4..83fbc8fd465d8 100644 --- a/Marlin/src/module/temperature.h +++ b/Marlin/src/module/temperature.h @@ -419,8 +419,6 @@ class Temperature { private: - static volatile bool raw_temps_ready; - #if ENABLED(WATCH_HOTENDS) static hotend_watch_t watch_hotend[HOTENDS]; #endif @@ -880,9 +878,19 @@ class Temperature { #endif private: + + // Reading raw temperatures and converting to Celsius when ready + static volatile bool raw_temps_ready; static void update_raw_temperatures(); static void updateTemperaturesFromRawValues(); + static inline bool updateTemperaturesIfReady() { + if (!raw_temps_ready) return false; + updateTemperaturesFromRawValues(); + raw_temps_ready = false; + return true; + } + // MAX Thermocouples #if HAS_MAX_TC #define MAX_TC_COUNT 1 + BOTH(TEMP_SENSOR_0_IS_MAX_TC, TEMP_SENSOR_1_IS_MAX_TC) #if MAX_TC_COUNT > 1