From 005af8414020165b3c2625549a0f9c08b760b197 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jo=C3=A3o=20Br=C3=A1zio?= Date: Wed, 13 Jul 2016 21:06:31 +0100 Subject: [PATCH] Update the bq Hephestos 2 configuration --- Marlin/example_configurations/Hephestos_2/Configuration.h | 8 ++++---- Marlin/example_configurations/Hephestos_2/README.md | 2 ++ 2 files changed, 6 insertions(+), 4 deletions(-) diff --git a/Marlin/example_configurations/Hephestos_2/Configuration.h b/Marlin/example_configurations/Hephestos_2/Configuration.h index 0d6252eabd89..53d522562bb5 100644 --- a/Marlin/example_configurations/Hephestos_2/Configuration.h +++ b/Marlin/example_configurations/Hephestos_2/Configuration.h @@ -711,16 +711,16 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l // default settings -#define DEFAULT_AXIS_STEPS_PER_UNIT {160, 160, 8000, 203} // default steps per unit for Ultimaker -#define DEFAULT_MAX_FEEDRATE {250, 250, 2, 200} // (mm/sec) -#define DEFAULT_MAX_ACCELERATION {1000, 1000, 20, 1000} // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for Skeinforge 40+, for older versions raise them a lot. +#define DEFAULT_AXIS_STEPS_PER_UNIT {160, 160, 8000, 210.02} // Steps per unit +#define DEFAULT_MAX_FEEDRATE {250, 250, 2, 200} // mm/sec +#define DEFAULT_MAX_ACCELERATION {1000, 1000, 20, 1000} // X, Y, Z, E max start speed for accelerated moves #define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration in mm/s^2 for printing moves #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration in mm/s^2 for retracts #define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration in mm/s^2 for travel (non printing) moves // The speed change that does not require acceleration (i.e. the software might assume it can be done instantaneously) -#define DEFAULT_XYJERK 10.0 // (mm/sec) +#define DEFAULT_XYJERK 20.0 // (mm/sec) #define DEFAULT_ZJERK 0.4 // (mm/sec) #define DEFAULT_EJERK 2.0 // (mm/sec) diff --git a/Marlin/example_configurations/Hephestos_2/README.md b/Marlin/example_configurations/Hephestos_2/README.md index 447022c94d9c..8fcb53c3dd5f 100644 --- a/Marlin/example_configurations/Hephestos_2/README.md +++ b/Marlin/example_configurations/Hephestos_2/README.md @@ -10,3 +10,5 @@ NOTE: The look and feel of the Hephestos 2 while navigating the LCD menu will ch * 2016/06/21 - Disabled hot bed related options Activated software endstops SD printing now disables the heater when finished + * 2016/07/13 - Update the `DEFAULT_AXIS_STEPS_PER_UNIT` for the Z axis + Increased the `DEFAULT_XYJERK`