From 50e5ee4de44d7fbf011334e2c31e9fe8b87b4e91 Mon Sep 17 00:00:00 2001 From: Rerouter Date: Wed, 28 Sep 2016 17:38:09 +1000 Subject: [PATCH] Update Configuration.h --- Marlin/Configuration.h | 3 --- 1 file changed, 3 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 08b6b75b09bb..477c4674d150 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -298,7 +298,6 @@ // Set/get with gcode: M301 E[extruder number, 0-2] #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - #define PID_INTEGRAL_DRIVE_MAX PID_MAX //limit for the integral term #define K1 0.95 //smoothing factor within the PID // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it @@ -345,8 +344,6 @@ //#define PID_BED_DEBUG // Sends debug data to the serial port. - #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) #define DEFAULT_bedKp 10.00