diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h
index d4ec9f22c0c17..e15aeb5c4b9cc 100644
--- a/Marlin/src/pins/pins.h
+++ b/Marlin/src/pins/pins.h
@@ -613,7 +613,7 @@
 #elif MB(BTT_MANTA_M8P_V1_1)
   #include "stm32g0/pins_BTT_MANTA_M8P_V1_1.h"    // STM32G0                              env:STM32G0B1VE_btt env:STM32G0B1VE_btt_xfer
 #elif MB(BTT_SKR_MINI_E3_V3_0_1)
-  #include "stm32f4/pins_BTT_SKR_MINI_E3_V3_0_1.h"// STM32F4                              env:STM32F401RC_btt
+  #include "stm32f4/pins_BTT_SKR_MINI_E3_V3_0_1.h"// STM32F4                              env:STM32F401RC_btt env:STM32F401RC_btt_xfer
 #elif MB(BTT_SKR_MINI_MZ_V1_0)
   #include "stm32f1/pins_BTT_SKR_MINI_MZ_V1_0.h"  // STM32F1                              env:STM32F103RC_btt env:STM32F103RC_btt_USB env:STM32F103RC_btt_maple env:STM32F103RC_btt_USB_maple
 #elif MB(BTT_SKR_E3_DIP)
diff --git a/ini/stm32f4.ini b/ini/stm32f4.ini
index 34a5c4d607bde..0f5bfdeb5326c 100644
--- a/ini/stm32f4.ini
+++ b/ini/stm32f4.ini
@@ -745,6 +745,20 @@ build_flags                 = ${stm32_variant.build_flags}
 upload_protocol             = stlink
 debug_tool                  = stlink
 
+#
+# BigTreeTech SKR Mini E3 V3.0.1 (STM32F401RCT6 ARM Cortex-M0+)
+# Custom upload to SD via Marlin with Binary Protocol
+# Requires Marlin with BINARY_FILE_TRANSFER already installed on the target board.
+# If CUSTOM_FIRMWARE_UPLOAD is also installed, Marlin will reboot the board to install the firmware.
+# Currently CUSTOM_FIRMWARE_UPLOAD must also be enabled to use 'xfer' build envs.
+#
+[env:STM32F401RC_btt_xfer]
+extends         = env:STM32F401RC_btt
+build_flags     = ${env:STM32F401RC_btt.build_flags} -DXFER_BUILD
+extra_scripts   = ${env:STM32F401RC_btt.extra_scripts}
+                  pre:buildroot/share/scripts/upload.py
+upload_protocol = custom
+
 #
 # MKS SKIPR v1.0 all-in-one board (STM32F407VE)
 #