diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 2fc388d15f8f..31cbd678bfd4 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -304,8 +304,8 @@ #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 + #if ENABLED(ADAPTIVE_FAN_SLOWING) && EITHER(MPCTEMP, PIDTEMP) + //#define TEMP_TUNING_MAINTAIN_FAN // Don't slow fan speed during M303 or M306 T #endif /** diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h index 74845cfa49db..5c149cee89e1 100644 --- a/Marlin/src/inc/Conditionals_post.h +++ b/Marlin/src/inc/Conditionals_post.h @@ -3054,7 +3054,7 @@ */ #if !HAS_FAN #undef ADAPTIVE_FAN_SLOWING - #undef NO_FAN_SLOWING_IN_PID_TUNING + #undef TEMP_TUNING_MAINTAIN_FAN #endif #if !BOTH(HAS_BED_PROBE, HAS_FAN) #undef PROBING_FANS_OFF diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h index e2accaaf977e..ec6d3ee1fb11 100644 --- a/Marlin/src/inc/SanityCheck.h +++ b/Marlin/src/inc/SanityCheck.h @@ -97,6 +97,8 @@ #error "Thermal Runaway Protection for hotends is now enabled with THERMAL_PROTECTION_HOTENDS." #elif DISABLED(THERMAL_PROTECTION_BED) && defined(THERMAL_PROTECTION_BED_PERIOD) #error "Thermal Runaway Protection for the bed is now enabled with THERMAL_PROTECTION_BED." +#elif defined(NO_FAN_SLOWING_IN_PID_TUNING) + #error "NO_FAN_SLOWING_IN_PID_TUNING is now TEMP_TUNING_MAINTAIN_FAN." #elif (CORE_IS_XZ || CORE_IS_YZ) && ENABLED(Z_LATE_ENABLE) #error "Z_LATE_ENABLE can't be used with COREXZ, COREZX, COREYZ, or COREZY." #elif defined(X_HOME_RETRACT_MM) diff --git a/Marlin/src/module/temperature.cpp b/Marlin/src/module/temperature.cpp index 5a018d257b71..60094128e26c 100644 --- a/Marlin/src/module/temperature.cpp +++ b/Marlin/src/module/temperature.cpp @@ -311,7 +311,7 @@ PGMSTR(str_t_heating_failed, STR_T_HEATING_FAILED); * public: */ -#if ENABLED(NO_FAN_SLOWING_IN_PID_TUNING) +#if ENABLED(TEMP_TUNING_MAINTAIN_FAN) bool Temperature::adaptive_fan_slowing = true; #endif @@ -731,7 +731,7 @@ volatile bool Temperature::raw_temps_ready = false; LEDColor color = ONHEATINGSTART(); #endif - TERN_(NO_FAN_SLOWING_IN_PID_TUNING, adaptive_fan_slowing = false); + TERN_(TEMP_TUNING_MAINTAIN_FAN, adaptive_fan_slowing = false); LCD_MESSAGE(MSG_HEATING); @@ -919,7 +919,7 @@ volatile bool Temperature::raw_temps_ready = false; TERN_(DWIN_PID_TUNE, DWIN_PidTuning(PID_DONE)); EXIT_M303: - TERN_(NO_FAN_SLOWING_IN_PID_TUNING, adaptive_fan_slowing = true); + TERN_(TEMP_TUNING_MAINTAIN_FAN, adaptive_fan_slowing = true); return; } @@ -950,10 +950,10 @@ volatile bool Temperature::raw_temps_ready = false; SERIAL_ECHOPGM(STR_MPC_AUTOTUNE); SERIAL_ECHOLNPGM(STR_MPC_AUTOTUNE_INTERRUPTED); TERN_(DWIN_LCD_PROUI, DWIN_MPCTuning(MPC_INTERRUPTED)); - return false; + return true; } - return true; + return false; }; struct OnExit { @@ -970,6 +970,8 @@ volatile bool Temperature::raw_temps_ready = false; #endif do_z_clearance(MPC_TUNING_END_Z); + + TERN_(TEMP_TUNING_MAINTAIN_FAN, adaptive_fan_slowing = true); } } on_exit; @@ -978,6 +980,8 @@ volatile bool Temperature::raw_temps_ready = false; MPCHeaterInfo &hotend = temp_hotend[active_extruder]; MPC_t &mpc = hotend.mpc; + TERN_(TEMP_TUNING_MAINTAIN_FAN, adaptive_fan_slowing = false); + // Move to center of bed, just above bed height and cool with max fan gcode.home_all_axes(true); disable_all_heaters(); @@ -1002,7 +1006,7 @@ volatile bool Temperature::raw_temps_ready = false; wait_for_heatup = true; for (;;) { // Can be interrupted with M108 - if (!housekeeping(ms, current_temp, next_report_ms)) return; + if (housekeeping(ms, current_temp, next_report_ms)) return; if (ELAPSED(ms, next_test_ms)) { if (current_temp >= ambient_temp) { @@ -1025,15 +1029,16 @@ volatile bool Temperature::raw_temps_ready = false; SERIAL_ECHOLNPGM(STR_MPC_HEATING_PAST_200); TERN(DWIN_LCD_PROUI, LCD_ALERTMESSAGE(MSG_MPC_HEATING_PAST_200), LCD_MESSAGE(MSG_HEATING)); hotend.target = 200.0f; // So M105 looks nice - hotend.soft_pwm_amount = MPC_MAX >> 1; + hotend.soft_pwm_amount = (MPC_MAX) >> 1; const millis_t heat_start_time = next_test_ms = ms; celsius_float_t temp_samples[16]; uint8_t sample_count = 0; uint16_t sample_distance = 1; float t1_time = 0; + wait_for_heatup = true; for (;;) { // Can be interrupted with M108 - if (!housekeeping(ms, current_temp, next_report_ms)) return; + if (housekeeping(ms, current_temp, next_report_ms)) return; if (ELAPSED(ms, next_test_ms)) { // Record samples between 100C and 200C @@ -1055,6 +1060,8 @@ volatile bool Temperature::raw_temps_ready = false; next_test_ms += 1000UL * sample_distance; } } + wait_for_heatup = false; + hotend.soft_pwm_amount = 0; // Calculate physical constants from three equally-spaced samples @@ -1088,8 +1095,9 @@ volatile bool Temperature::raw_temps_ready = false; #endif float last_temp = current_temp; + wait_for_heatup = true; for (;;) { // Can be interrupted with M108 - if (!housekeeping(ms, current_temp, next_report_ms)) return; + if (housekeeping(ms, current_temp, next_report_ms)) return; if (ELAPSED(ms, next_test_ms)) { hotend.soft_pwm_amount = (int)get_pid_output_hotend(active_extruder) >> 1; @@ -1119,6 +1127,7 @@ volatile bool Temperature::raw_temps_ready = false; break; } } + wait_for_heatup = false; const float power_fan0 = total_energy_fan0 * 1000 / test_duration; mpc.ambient_xfer_coeff_fan0 = power_fan0 / (hotend.target - ambient_temp); @@ -4167,6 +4176,7 @@ void Temperature::isr() { } while (wait_for_heatup && TEMP_CONDITIONS); + // If wait_for_heatup is set, temperature was reached, no cancel if (wait_for_heatup) { wait_for_heatup = false; #if HAS_DWIN_E3V2_BASIC @@ -4305,6 +4315,7 @@ void Temperature::isr() { } while (wait_for_heatup && TEMP_BED_CONDITIONS); + // If wait_for_heatup is set, temperature was reached, no cancel if (wait_for_heatup) { wait_for_heatup = false; ui.reset_status(); @@ -4383,6 +4394,7 @@ void Temperature::isr() { } } + // If wait_for_heatup is set, temperature was reached, no cancel if (wait_for_heatup) { wait_for_heatup = false; ui.reset_status(); @@ -4482,6 +4494,7 @@ void Temperature::isr() { } } while (wait_for_heatup && TEMP_CHAMBER_CONDITIONS); + // If wait_for_heatup is set, temperature was reached, no cancel if (wait_for_heatup) { wait_for_heatup = false; ui.reset_status(); @@ -4568,6 +4581,7 @@ void Temperature::isr() { first_loop = false; #endif // TEMP_COOLER_RESIDENCY_TIME > 0 + // Prevent a wait-forever situation if R is misused i.e. M191 R0 if (wants_to_cool) { // Break after MIN_COOLING_SLOPE_TIME_CHAMBER seconds // if the temperature did not drop at least MIN_COOLING_SLOPE_DEG_CHAMBER @@ -4580,7 +4594,7 @@ void Temperature::isr() { } while (wait_for_heatup && TEMP_COOLER_CONDITIONS); - // Prevent a wait-forever situation if R is misused i.e. M191 R0 + // If wait_for_heatup is set, temperature was reached, no cancel if (wait_for_heatup) { wait_for_heatup = false; ui.reset_status(); diff --git a/Marlin/src/module/temperature.h b/Marlin/src/module/temperature.h index 9f44be3d5c4b..c3730fda78a7 100644 --- a/Marlin/src/module/temperature.h +++ b/Marlin/src/module/temperature.h @@ -1162,6 +1162,12 @@ class Temperature { static void auto_job_check_timer(const bool can_start, const bool can_stop); #endif + #if ENABLED(TEMP_TUNING_MAINTAIN_FAN) + static bool adaptive_fan_slowing; + #elif ENABLED(ADAPTIVE_FAN_SLOWING) + static constexpr bool adaptive_fan_slowing = true; + #endif + /** * Perform auto-tuning for hotend or bed in response to M303 */ @@ -1173,12 +1179,6 @@ class Temperature { static void PID_autotune(const celsius_t target, const heater_id_t heater_id, const int8_t ncycles, const bool set_result=false); - #if ENABLED(NO_FAN_SLOWING_IN_PID_TUNING) - static bool adaptive_fan_slowing; - #elif ENABLED(ADAPTIVE_FAN_SLOWING) - static constexpr bool adaptive_fan_slowing = true; - #endif - // Update the temp manager when PID values change #if ENABLED(PIDTEMP) static void updatePID() { HOTEND_LOOP() temp_hotend[e].pid.reset(); } diff --git a/buildroot/tests/LPC1768 b/buildroot/tests/LPC1768 index 535e776a3892..2e680b60d797 100755 --- a/buildroot/tests/LPC1768 +++ b/buildroot/tests/LPC1768 @@ -40,7 +40,7 @@ opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EEB \ NOZZLE_CLEAN_MIN_TEMP 170 \ NOZZLE_CLEAN_START_POINT "{ { 10, 10, 3 }, { 10, 10, 3 } }" \ NOZZLE_CLEAN_END_POINT "{ { 10, 20, 3 }, { 10, 20, 3 } }" -opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER ADAPTIVE_FAN_SLOWING NO_FAN_SLOWING_IN_PID_TUNING \ +opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER ADAPTIVE_FAN_SLOWING TEMP_TUNING_MAINTAIN_FAN \ FILAMENT_WIDTH_SENSOR FILAMENT_LCD_DISPLAY PID_EXTRUSION_SCALING SOUND_MENU_ITEM \ NOZZLE_AS_PROBE AUTO_BED_LEVELING_BILINEAR PREHEAT_BEFORE_LEVELING G29_RETRY_AND_RECOVER Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \ ASSISTED_TRAMMING ASSISTED_TRAMMING_WIZARD REPORT_TRAMMING_MM ASSISTED_TRAMMING_WAIT_POSITION \ diff --git a/buildroot/tests/LPC1769 b/buildroot/tests/LPC1769 index dae65b6a3509..b3348c6d6528 100755 --- a/buildroot/tests/LPC1769 +++ b/buildroot/tests/LPC1769 @@ -18,7 +18,7 @@ opt_set MOTHERBOARD BOARD_SMOOTHIEBOARD \ GRID_MAX_POINTS_X 16 \ NOZZLE_CLEAN_START_POINT "{ { 10, 10, 3 }, { 10, 10, 3 } }" \ NOZZLE_CLEAN_END_POINT "{ { 10, 20, 3 }, { 10, 20, 3 } }" -opt_enable TFTGLCD_PANEL_SPI SDSUPPORT ADAPTIVE_FAN_SLOWING NO_FAN_SLOWING_IN_PID_TUNING \ +opt_enable TFTGLCD_PANEL_SPI SDSUPPORT ADAPTIVE_FAN_SLOWING TEMP_TUNING_MAINTAIN_FAN \ MAX31865_SENSOR_OHMS_0 MAX31865_CALIBRATION_OHMS_0 \ MAG_MOUNTED_PROBE AUTO_BED_LEVELING_BILINEAR G29_RETRY_AND_RECOVER Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \ BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BED_TRAMMING_USE_PROBE BED_TRAMMING_VERIFY_RAISED \