train.json

{"role": "system", "content": "Configuration commands for Arista EOS devices."}, {"role": "user", "content": "Configure ip address 192.168.1.1/32 on interface ethernet 1"}, {"role": "assistant", "content": "enable\nconfigure terminal\ninterface ethernet 1\nip address 192.168.1.1/32\n"}, {"role": "user", "content": "Configure MTU 5000 on interface ethernet 1"}, {"role": "assistant", "content": "enable\nconfigure terminal\ninterface ethernet 1\nmtu 5000\n"}, {"role": "user", "content": "Configure load interval as 5 sec on interface ethernet1"}, {"role": "assistant", "content": "enable\nconfigure terminal\ninterface ethernet1\nload-interval 5\n"}, {"role": "user", "content": "Configure BGP with ASN 500, neighbor as 192.168.1.1, and neighbor ASN as 1000"}, {"role": "assistant", "content": "enable\nconfigure terminal\nrouter bgp 500\nneighbor 192.168.1.1 remote-as 1000\n"}, {"role": "user", "content": "Add new user with name arista and password as arista"}, {"role": "assistant", "content": "enable\nconfigure terminal\nusername arista secret arista\n"}, {"role": "user", "content": "Change the hostname as DLFW1"}, {"role": "assistant", "content": "enable\nconfigure terminal\nhostname DLFW1\n"}, {"role": "user", "content": "Configure OSPF 1 with router ID as 10.10.10.10, area ID as 0.0.0.0, range as 192.168.0.0/24, network as 10.0.0.0/24on interface ethernet 1"}, {"role": "assistant", "content": "enable\nconfigure terminal\nrouter ospf 1\nrouter-id 10.10.10.10\narea 0.0.0.0 range 192.168.0.0/24\nnetwork 10.0.0.0/24 area 0.0.0.0\nexit\ninterface ethernet 1\nip ospf area 0.0.0.0\n"}, {"role": "user", "content": "Add a static route for ip address 10.10.1.1/24 from next hop as Vlan50"}, {"role": "assistant", "content": "enable\nconfigure terminal\nip route 10.10.1.1/24 Vlan50\n"}, {"role": "user", "content": "Update the description as 'This is test description' on interface ethernet1"}, {"role": "assistant", "content": "enable\nconfigure terminal\ninterface ethernet1\ndescription This is a test description\n"}, {"role": "user", "content": "Create patch panel name as arsita, connector1 interface as ethernt10, On connector2 connection type as BGP, VPWS name as test-vpws, PW name as test-pw and VPWS type as vlan"}, {"role": "assistant", "content": "enable\nconfigure terminal\npatch panel\npatch arista\nconnector 1 interface ethernet 10\nconnector 2 pseudowire bgp vpws test-vpws pseudowire test-pw\n"}, {"role": "user", "content": "Configure HTTP with port 80 and HTTPS with port 443"}, {"role": "assistant", "content": "enable\nconfigure terminal\nmanagement http\nprotocol http port 80 \n\nmanagement http\nprotocol https port 443\n\n"}, {"role": "user", "content": "Configure interface Ethernet1 with rate as 1Gbps full duplex"}, {"role": "assistant", "content": "enable\nconfigure terminal\ninterface Ethernet1\nspeed forced 1000full\n"}, {"role": "user", "content": "Configure a schedule job for show tech-support command with name tech-suuport, start at 12:00:00, interval 120 min, max log files 100 and log location as flash:schedule/tech-support/"}, {"role": "assistant", "content": "enable\nconfigure terminal\nschedule tech-support at 12:00:00 interval 120 max-log-files 100 loglocation flash:schedule/tech-support/ command show tech-support\n"}, {"role": "user", "content": "Create a vlan 1000 with name as arista"}, {"role": "assistant", "content": "enable\nconfigure terminal\nvlan 1000\name arsita\n"}, {"role": "user", "content": "Configure user password complexity of length 20"}, {"role": "assistant", "content": "enable\nconfigure terminal\nmanagement security\npassword minimum length 20\n"},{"role": "user", "content": "Configure user password complexity of length 20"}, {"role": "assistant", "content": "enable\nconfigure terminal\nmanagement security\npassword minimum length 20\n"},{"role": "user", "content": "Configure a switch with source interface as Management1, Logging VRF as MGMT and syslog server ip as 192,168.1.1 514"}, {"role": "assistant", "content": "enable\nconfigure terminal\nlogging vrf MGMT source-interface Management1\nlogging vrf MGMT host 192.168.1.1 514\n"},{"role": "user", "content": "configure a name-server 9.8.8.8 in vrf default"}, {"role": "assistant", "content": "enable\nconfigure terminal\nip name-server vrf default 9.9.9.9\n"},{"role": "user", "content": "Enable management api for http commands"}, {"role": "assistant", "content": "enable\nconfigure terminal\nmanagement api http-commands\nvrf default\n"},{"role": "user", "content": "Configure NTP server with ip 8.7.7.7"}, {"role": "assistant", "content": "enable\nconfigure terminal\nntp server 8.7.7.7\nvrf default\n"}, {"role": "user", "content": "Configure login banner on the switch"}, {"role": "assistant", "content": "enable\nconfigure terminal\nbanner login\nThis is a sample login banner. EOF\n"}, {"role": "user", "content": "Configure interface ethernet1 as trunk port"}, {"role": "assistant", "content": "enable\nconfigure terminal\ninterface ethernet1\nswitchport mode trunk\n"}, {"role": "user", "content": "Configure VARP on an arista switch"}, {"role": "assistant", "content": "enable\nconfigure terminal\nip virtual-router mac-address 001c.7300.0999\ninterface vlan 50\nip address 10.10.4.1/24\nip virtual-router address 10.10.4.10\ninterface vlan 70\nip address 10.24.4.17/24\nip virtual-router address 10.24.4.1\nexit\n"}, {"role": "user", "content": "Configure SVI on arista switch"}, {"role": "assistant", "content": "enable\nconfigure terminal\ninterface vlan 10\nip address 10.0.0.2/24\nip virtual-router address 10.0.0.6\nexit\n"}, {"role": "user", "content": "Configure boot security unencrypted password as arista."},  {"role": "assistant", "content": "enable\nconfigure terminal\nboot secret 0 arista\n"}, {"role": "user", "content": "Configure a name-server 192.168.10.10 on vlan 1197."},  {"role": "assistant", "content": "enable\nconfigure terminal\ninterface vlan 1197\nip name-server 192.168.10.10\n"}, {"role": "user", "content": "Configure DHCP server 192.168.10.0/24 with 2 days lease time."},  {"role": "assistant", "content": "enable\nconfigure terminal\ndhcp server\nlease time ipv4 2 days 0 hours 0 minutes\nsubnet 192.168.10.0/24\n"}, {"role": "system", "content": "Configuration commands for Arista EOS devices."}, {"role": "user", "content": "Configure switch group on an arista switch"}, {"role": "assistant", "content": "enable\nconfigure terminal\nmanagement xmpp\nswitch-group abc@test.com\n"}, {"role": "user", "content": "Configure and create a profile that allows forwarding of all frames"}, {"role": "assistant", "content": "enable\nconfigure terminal\nforwarding profile abc\nisis forward\nmacsec tagged forward\npause untagged forward\nexit\n"}, {"role": "user", "content": "CConfigure a layer2 sub interface ethernet1.1 with encapsulation dot1q vlan 100 on arista switch"}, {"role": "assistant", "content": "enable\nconfigure terminal\ninterface et1\nno switchport\ninterface et1.1\nencapsulation dot1q vlan 100\nvlan id 200\n"}, {"role": "user", "content": "Configure BFD on interface Ethernet3 with echo enabled and 10000 milliseconds interval and 4 packets that must be missed in succession before BFD declares the session to be down."}, {"role": "assistant", "content": "enable\nconfigure terminal\ninterface Ethernet3\nbfd authentication mode disabled\nbfd echo\nbfd interval 10000 min-rx 10000 multiplier 4\n"}, {"role": "user", "content": "Enable LLDP transmit and receive on interface ethernet 3"}, {"role": "assistant", "content": "enable\nconfigure terminal\ninterface Ethernet3\nlldp receive\nlldp transmit\n"}, {"role": "user", "content": "Add interface ethernet 7 to channel group 7 with static link aggregation."}, {"role": "assistant", "content": "enable\nconfigure terminal\ninterface Ethernet7\nchannel-group 7 mode on\n"}, {"role": "user", "content": "Add interface ethernet 7 to channel group 7 with LACP enabled."}, {"role": "assistant", "content": "enable\nconfigure terminal\ninterface Ethernet7\nchannel-group 7 mode active\n"}, {"role": "user", "content": "Configure multi agent routing model on device."}, {"role": "assistant", "content": "enable\nconfigure terminal\nservice routing protocols model multi-agent\n"}, {"role": "user", "content": "Configure ribd routing protcol."}, {"role": "assistant", "content": "enable\nconfigure terminal\nservice routing protocols model ribd\n"}, {"role": "user", "content": "Configure rip protocol on an arista switch"}, {"role": "assistant", "content": "enable\nconfigure terminal\nrouter rip\nnetwork 192.168.1.0/24\nnetwork 10.0.0.0/8\nexit\n"},