Remap Rules

Create / Edit / Remove remap rules here. Up to 50 per profile is allowed.

• Use to add new rule to the list.
• Use SQUARE to enable/disable (Default: *ON) selected remap rule.
• Use TRIANGLE to toggle propagation mode (Default: *OFF) for selected rule. When propagation is enabled, remapped input would be sent alongside. emulated one. For example, if you enable propagation for a rule CROSS>SQUARE, pressing CROSS, will send both buttons, CROSS and SQUARE to the app, while with propagation disabled, only SQUARE will be sent.
• Use *L1 to toggle 'sticky' mode (Default: OFF). When 'sticky' mode is enabled, rule will remain active, until you trigger it again.
• Use R1 to toggle 'turbo' mode (Default: OFF). When turbo mode, rule is activated in short bursts, duration of witch could be set under Profile>Turbo menu.