From 2e193b596dc7a31551200d2853801c65af70b37a Mon Sep 17 00:00:00 2001
From: Chris <chris@rootiest.com>
Date: Sat, 13 May 2023 06:49:38 -0400
Subject: [PATCH] sample macros

---
 dev/discord_print.cfg | 93 +++++++++++++++++++++++++++++++++++++++++++
 dev/dual_sensors.cfg  | 29 ++++++++++++++
 2 files changed, 122 insertions(+)
 create mode 100644 dev/discord_print.cfg
 create mode 100644 dev/dual_sensors.cfg

diff --git a/dev/discord_print.cfg b/dev/discord_print.cfg
new file mode 100644
index 0000000..5aca704
--- /dev/null
+++ b/dev/discord_print.cfg
@@ -0,0 +1,93 @@
+# Start G-Code:
+# 
+# START_PRINT BED_TEMP_0={first_layer_bed_temperature[0]} BED_TEMP1={first_layer_bed_temperature[1]} EXTRUDER_TEMP_0={first_layer_temperature[0]} EXTRUDER_TEMP_1={first_layer_temperature[1]} INITIAL_EXTRUDER={initial_extruder} INITIAL_EXTRUDER_TEMP={first_layer_temperature[initial_extruder]} INITIAL_BED_TEMP={first_layer_bed_temperature[initial_extruder]} START_X_MIN={first_layer_print_min[0]} START_Y_MIN={first_layer_print_min[1]} START_X_MAX={first_layer_print_max[0]} START_Y_MAX={first_layer_print_max[1]} 
+# 
+# 
+
+
+[gcode_macro START_PRINT]
+gcode:
+    {% set bed_temp_0 = params.BED_TEMP_0|default(60)|float %}
+    {% set bed_temp_1 = params.BED_TEMP_1|default(60)|float %}
+    {% set extruder_temp_0 = params.EXTRUDER_TEMP_0|default(200)|float %}
+    {% set extruder_temp_1 = params.EXTRUDER_TEMP_1|default(200)|float %}
+    {% set initial_extruder = params.INITIAL_EXTRUDER|default(0)|int %}
+    {% set initial_extruder_temp = params.INITIAL_EXTRUDER_TEMP|default(200)|int %}
+    {% set initial_bed_temp = params.INITIAL_BED_TEMP|default(60)|int %}
+    {% set first_layer_print_min_x = params.START_X_MIN %}
+    {% set first_layer_print_min_y = params.START_Y_MIN %}
+    {% set first_layer_print_max_x = params.START_X_MAX %}
+    {% set first_layer_print_max_y = params.START_Y_MAX %}
+    ; set rpi fan to full
+    SET_FAN_SPEED FAN=rpi SPEED=1
+    ; set bed temperature
+    M118{"Bed Set to Temp "}{max(bed_temp_0, bed_temp_1)}
+    M140 S{max(bed_temp_0, bed_temp_1)}
+    ; set standby temp, extruder 0
+    {% if extruder_temp_0 > 50 %}
+        M118{"T0 Set to Standby Temp "}{round(extruder_temp_0*.85)}
+        M104 S{round(extruder_temp_0*.85)} T0
+    {% else %}
+        M118{"T0 Set to Temp Off"}
+        M104 S0 T0
+    {% endif %}
+    ; set standby temp, extruder 1
+    {% if extruder_temp_1 > 50 %}
+        M118{"T1 Set to Standby Temp "}{round(extruder_temp_1*.85)}
+        M104 S{round(extruder_temp_1*.85)} T1
+    {% else %}
+        M118{"T1 Set to Temp Off "}
+        M104 S0 T1
+    {% endif %}
+    ; set initial temp, initial extruder
+    M118{"T"}[initial_extruder]{" Initial Extruder Set to Temp "}{initial_extruder_temp}
+    M104 S{initial_extruder_temp} T[initial_extruder]
+    ; heat to temp, bed temperature
+    M118{"Bed Heating to Temp "}{max(bed_temp_0, bed_temp_1)}
+    M190 S{max(bed_temp_0, bed_temp_1)}
+    ; heat to temp, initial extruder
+    M118{"T"}[initial_extruder]{" Initial Extruder Heating to Temp "}{initial_extruder_temp}
+    M109 S{initial_extruder_temp} T[initial_extruder]
+    ; heat soak, bed temperature
+    M118{"Bed Heat Soaking to Temp "}{max(bed_temp_0, bed_temp_1)}
+    G4 P60000
+    ; home, tram gantry, and home
+    G34
+    ; auto bed leveling
+    ;G29
+    ; auto bed leveling, only active print area
+    BED_MESH_CALIBRATE PRINT_MIN={first_layer_print_min_x},{first_layer_print_min_y} PRINT_MAX={first_layer_print_max_x},{first_layer_print_max_y} FORCE_NEW_MESH=True
+    ; park extruders
+    _PARK_extruder1
+    _PARK_extruder
+    ; initiate extruder
+    T[initial_extruder]
+
+
+
+# End G-Code:
+# 
+# END_PRINT
+# 
+# 
+
+[gcode_macro END_PRINT]
+gcode:
+    ; zero rpi fan
+    SET_FAN_SPEED FAN=rpi SPEED=0
+    ; turn off heaters
+    TURN_OFF_HEATERS
+    ; raise z
+    G91
+    G0 Z5 F500
+    G90
+    ; kill fan
+    M107
+    ; park extruders
+    _PARK_extruder1
+    _PARK_extruder
+    T0
+    ; present print
+    BED_PRESENT
+    ; disable steppers
+    M18
\ No newline at end of file
diff --git a/dev/dual_sensors.cfg b/dev/dual_sensors.cfg
new file mode 100644
index 0000000..d5f9475
--- /dev/null
+++ b/dev/dual_sensors.cfg
@@ -0,0 +1,29 @@
+[filament_motion_sensor extruder0]
+pause_on_runout: False ; pause handled by macro
+runout_gcode:
+    FILAMENT_RUNOUT EXTRUDER=0 ; trigger filament runout
+
+[filament_motion_sensor extruder1]
+pause_on_runout: False ; pause handled by macro
+runout_gcode:
+    FILAMENT_RUNOUT EXTRUDER=1 ; trigger filament runout
+
+[gcode_macro filament_runout]
+variable_extruder: 0
+gcode:
+    {% set runout = params.extruder|int|default(0) %}
+    {% if extruder == 0 and runout == 0 %}
+        M600
+    {% elif extruder == 1 and runout == 1 %}
+        M600
+    {% endif %}
+
+[gcode_macro T0]
+gcode:
+    SET_GCODE_VARIABLE MACRO=filament_runout VARIABLE=extruder VALUE=0
+    # etc
+
+[gcode_macro T1]
+gcode:
+    SET_GCODE_VARIABLE MACRO=filament_runout VARIABLE=extruder VALUE=1
+    # etc
\ No newline at end of file