Ip-adapter behavior (only the second half)

[Ratinod]

If you try to use IP-Adapter you will get interesting behavior.

When using "Ip-adapter-plus" you will have two different parts of the video and only the second one will stick to the IP adapter.
And this behavior can be controlled a little. (reduce Ip-adapter weight a little)

But as you can understand, IP-Adapter has practically no effect on the first half of the video.
I would like to leave this behavior as well, but also to be able to have the IP-Adapter work throughout the entire video and not just the second half.
test image:

Bonus:

[Kosinkadink]

Gotcha, I have a hunch about why this happens. Try rerunning it with the "unlimited_batch_area" on the Load AnimateDiff Model node set to True (might fail if not enough VRAM, but will help debugging). Let me know if that changes anything in the output.

[Ratinod]

Yes. You're right. If you enable the Unlimited area hack in the AnimateDiff Loader, then the IP-Adapter works throughout the entire video. In addition, bright saturated colors are obtained as a result.

And to my surprise, in my case, the consumption of video memory did not rise as much as I thought. 8GB VRAM (7.8/8.0) is just enough for me to create 24 frames at 512x768 resolution (I haven't tried the upscaling technique you described yet.).

I will look forward to updates. :)

[Ratinod]

Square image limit (when using IP-Adapter) - 608x608