diff --git a/EXPERIMENTS.MD b/EXPERIMENTS.MD index fd3f75f..ef5012a 100644 --- a/EXPERIMENTS.MD +++ b/EXPERIMENTS.MD @@ -77,25 +77,25 @@ Cardboard, string, bubblewrap and plastic bags.
![selecting_accelerometers](resources/selecting_accelerometers.png) _4. Configure the accelerometers to read only when the reading is above 50 using events:__ -_4.1 Press A on the first sensor:
+__4.1 Press A on the first sensor:
![selecting_logging_settings_sensors](resources/selecting_logging_settings_sensors.png) -_4.2 Press A on measurements and then use Up and Down. Press A when you are done to confirm:
+__4.2 Press A on measurements and then use Up and Down. Press A when you are done to confirm:
![selecting_measurement_qty](resources/selecting_measurement_qty.png) -_4.3 Move Down to the Period/Event toggle:
+__4.3 Move Down to the Period/Event toggle:
![selecting_period_vs_event](resources/selecting_period_vs_event.png) -_4.4 Press Left & Right to toggle between modes (Green is active, White is inactive). Then press A to continue:
+__4.4 Press Left & Right to toggle between modes (Green is active, White is inactive). Then press A to continue:
![selecting_period_vs_event_2](resources/selecting_period_vs_event_2.png) -_4.5 Use the Up and Down to change the inequality sign to a >:
+__4.5 Use the Up and Down to change the inequality sign to a >:
![selecting_inequality](resources/selecting_inequality.png) -_4.6 Press Right, then press Up to change the comparator to 50:
+__4.6 Press Right, then press Up to change the comparator to 50:
![selecting_comparator](resources/selecting_comparator.png) -_4.7 Press Done and repeat the configuration for the other sensors:
+__4.7 Press Done and repeat the configuration for the other sensors:
![selecting_logging_settings_2](resources/selecting_logging_settings_2.png) 3. When you have configured the last sensor the Target microbits that are connected to the Commander will receive their commands to record those 3 accelerometers. You will be brought back to the Commander mode screen.