diff --git a/base/accumulate.jl b/base/accumulate.jl
new file mode 100644
index 0000000000000..6bc0f27892727
--- /dev/null
+++ b/base/accumulate.jl
@@ -0,0 +1,393 @@
+# accumulate_pairwise slightly slower then accumulate, but more numerically
+# stable in certain situations (e.g. sums).
+# it does double the number of operations compared to accumulate,
+# though for cheap operations like + this does not have much impact (20%)
+function _accumulate_pairwise!(op::Op, c::AbstractVector{T}, v::AbstractVector, s, i1, n)::T where {T,Op}
+    @inbounds if n < 128
+        s_ = v[i1]
+        c[i1] = op(s, s_)
+        for i = i1+1:i1+n-1
+            s_ = op(s_, v[i])
+            c[i] = op(s, s_)
+        end
+    else
+        n2 = n >> 1
+        s_ = _accumulate_pairwise!(op, c, v, s, i1, n2)
+        s_ = op(s_, _accumulate_pairwise!(op, c, v, op(s, s_), i1+n2, n-n2))
+    end
+    return s_
+end
+
+function accumulate_pairwise!(op::Op, result::AbstractVector, v::AbstractVector) where Op
+    li = linearindices(v)
+    li != linearindices(result) && throw(DimensionMismatch("input and output array sizes and indices must match"))
+    n = length(li)
+    n == 0 && return result
+    i1 = first(li)
+    @inbounds result[i1] = v1 = reduce_first(op,v[i1])
+    n == 1 && return result
+    _accumulate_pairwise!(op, result, v, v1, i1+1, n-1)
+    return result
+end
+
+function accumulate_pairwise(op, v::AbstractVector{T}) where T
+    out = similar(v, promote_op(op, T, T))
+    return accumulate_pairwise!(op, out, v)
+end
+
+
+"""
+    cumsum!(B, A; dims::Integer)
+
+Cumulative sum of `A` along the dimension `dims`, storing the result in `B`. See also [`cumsum`](@ref).
+"""
+cumsum!(B::AbstractArray{T}, A; dims::Integer) where {T} =
+    accumulate!(add_sum, B, A, dims=dims)
+
+function cumsum!(out::AbstractArray, v::AbstractVector; dims::Integer=1)
+    # we dispatch on the possibility of numerical stability issues
+    _cumsum!(out, v, dims, ArithmeticStyle(eltype(out)))
+end
+
+function _cumsum!(out::AbstractArray{T}, v, dim, ::ArithmeticRounds) where {T}
+    dim == 1 ? accumulate_pairwise!(add_sum, out, v) : copyto!(out, v)
+end
+function _cumsum!(out::AbstractArray, v, dim, ::ArithmeticUnknown)
+    _cumsum!(out, v, dim, ArithmeticRounds())
+end
+function _cumsum!(out::AbstractArray{T}, v, dim, ::ArithmeticStyle) where {T}
+    dim == 1 ? accumulate!(add_sum, out, v) : copyto!(out, v)
+end
+
+"""
+    cumsum(A; dims::Integer)
+
+Cumulative sum along the dimension `dims`. See also [`cumsum!`](@ref)
+to use a preallocated output array, both for performance and to control the precision of the
+output (e.g. to avoid overflow).
+
+# Examples
+```jldoctest
+julia> a = [1 2 3; 4 5 6]
+2×3 Array{Int64,2}:
+ 1  2  3
+ 4  5  6
+
+julia> cumsum(a, dims=1)
+2×3 Array{Int64,2}:
+ 1  2  3
+ 5  7  9
+
+julia> cumsum(a, dims=2)
+2×3 Array{Int64,2}:
+ 1  3   6
+ 4  9  15
+```
+"""
+function cumsum(A::AbstractArray{T}; dims::Union{Nothing,Integer}=nothing) where T
+    if dims === nothing
+        depwarn("`cumsum(A::AbstractArray)` is deprecated, use `cumsum(A, dims=1)` instead.", :cumsum)
+        dims = 1
+    end
+    out = similar(A, promote_op(add_sum, T, T))
+    cumsum!(out, A, dims=dims)
+end
+
+"""
+    cumsum(x::AbstractVector)
+
+Cumulative sum a vector. See also [`cumsum!`](@ref)
+to use a preallocated output array, both for performance and to control the precision of the
+output (e.g. to avoid overflow).
+
+# Examples
+```jldoctest
+julia> cumsum([1, 1, 1])
+3-element Array{Int64,1}:
+ 1
+ 2
+ 3
+
+julia> cumsum([fill(1, 2) for i in 1:3])
+3-element Array{Array{Int64,1},1}:
+ [1, 1]
+ [2, 2]
+ [3, 3]
+```
+"""
+cumsum(x::AbstractVector) = cumsum(x, dims=1)
+
+
+"""
+    cumprod!(B, A; dims::Integer)
+
+Cumulative product of `A` along the dimension `dims`, storing the result in `B`.
+See also [`cumprod`](@ref).
+"""
+cumprod!(B::AbstractArray{T}, A; dims::Integer) where {T} =
+    accumulate!(add_sum, B, A, dims=dims)
+
+"""
+    cumprod!(y::AbstractVector, x::AbstractVector)
+
+Cumulative product of a vector `x`, storing the result in `y`.
+See also [`cumprod`](@ref).
+"""
+cumprod!(y::AbstractVector, x::AbstractVector) = cumprod!(y, x, dims=1)
+
+"""
+    cumprod(A; dims::Integer)
+
+Cumulative product along the dimension `dim`. See also
+[`cumprod!`](@ref) to use a preallocated output array, both for performance and
+to control the precision of the output (e.g. to avoid overflow).
+
+# Examples
+```jldoctest
+julia> a = [1 2 3; 4 5 6]
+2×3 Array{Int64,2}:
+ 1  2  3
+ 4  5  6
+
+julia> cumprod(a, dims=1)
+2×3 Array{Int64,2}:
+ 1   2   3
+ 4  10  18
+
+julia> cumprod(a, dims=2)
+2×3 Array{Int64,2}:
+ 1   2    6
+ 4  20  120
+```
+"""
+function cumprod(A::AbstractArray; dims::Union{Nothing,Integer}=nothing)
+    if dims === nothing
+        depwarn("`cumprod(A::AbstractArray)` is deprecated, use `cumprod(A, dims=1)` instead.", :cumprod)
+        dims = 1
+    end
+    return accumulate(mul_prod, A, dims=dims)
+end
+
+"""
+    cumprod(x::AbstractVector)
+
+Cumulative product of a vector. See also
+[`cumprod!`](@ref) to use a preallocated output array, both for performance and
+to control the precision of the output (e.g. to avoid overflow).
+
+# Examples
+```jldoctest
+julia> cumprod(fill(1//2, 3))
+3-element Array{Rational{Int64},1}:
+ 1//2
+ 1//4
+ 1//8
+
+julia> cumprod([fill(1//3, 2, 2) for i in 1:3])
+3-element Array{Array{Rational{Int64},2},1}:
+ [1//3 1//3; 1//3 1//3]
+ [2//9 2//9; 2//9 2//9]
+ [4//27 4//27; 4//27 4//27]
+```
+"""
+cumprod(x::AbstractVector) = cumprod(x, dims=1)
+
+
+"""
+    accumulate(op, A; dims::Integer)
+
+Cumulative operation `op` along the dimension `dims`. See also
+[`accumulate!`](@ref) to use a preallocated output array, both for performance and
+to control the precision of the output (e.g. to avoid overflow). For common operations
+there are specialized variants of `accumulate`, see:
+[`cumsum`](@ref), [`cumprod`](@ref)
+
+# Examples
+```jldoctest
+julia> accumulate(+, fill(1, 3, 3), dims=1)
+3×3 Array{Int64,2}:
+ 1  1  1
+ 2  2  2
+ 3  3  3
+
+julia> accumulate(+, fill(1, 3, 3), dims=2)
+3×3 Array{Int64,2}:
+ 1  2  3
+ 1  2  3
+ 1  2  3
+```
+"""
+function accumulate(op, A; dims::Integer)
+    out = similar(A, promote_op(op, eltype(A), eltype(A)))
+    accumulate!(op, out, A, dims=dims)
+end
+
+"""
+    accumulate(op, x::AbstractVector)
+
+Cumulative operation `op` on a vector. See also
+[`accumulate!`](@ref) to use a preallocated output array, both for performance and
+to control the precision of the output (e.g. to avoid overflow). For common operations
+there are specialized variants of `accumulate`, see:
+[`cumsum`](@ref), [`cumprod`](@ref)
+
+# Examples
+```jldoctest
+julia> accumulate(+, [1,2,3])
+3-element Array{Int64,1}:
+ 1
+ 3
+ 6
+
+julia> accumulate(*, [1,2,3])
+3-element Array{Int64,1}:
+ 1
+ 2
+ 6
+```
+"""
+accumulate(op, x::AbstractVector) = accumulate(op, x, dims=1)
+
+"""
+    accumulate!(op, B, A; dims::Integer)
+
+Cumulative operation `op` on `A` along the dimension `dims`, storing the result in `B`.
+See also [`accumulate`](@ref).
+
+# Examples
+```jldoctest
+julia> A = [1 2; 3 4];
+
+julia> B = [0 0; 0 0];
+
+julia> accumulate!(-, B, A, dims=1);
+
+julia> B
+2×2 Array{Int64,2}:
+  1   2
+ -2  -2
+
+julia> accumulate!(-, B, A, dims=2);
+
+julia> B
+2×2 Array{Int64,2}:
+ 1  -1
+ 3  -1
+```
+"""
+function accumulate!(op, B, A; dims::Integer)
+    dim = dims
+    dim > 0 || throw(ArgumentError("dim must be a positive integer"))
+    inds_t = axes(A)
+    axes(B) == inds_t || throw(DimensionMismatch("shape of B must match A"))
+    dim > ndims(A) && return copyto!(B, A)
+    isempty(inds_t[dim]) && return B
+    if dim == 1
+        # We can accumulate to a temporary variable, which allows
+        # register usage and will be slightly faster
+        ind1 = inds_t[1]
+        @inbounds for I in CartesianIndices(tail(inds_t))
+            tmp = reduce_first(op, A[first(ind1), I])
+            B[first(ind1), I] = tmp
+            for i_1 = first(ind1)+1:last(ind1)
+                tmp = op(tmp, A[i_1, I])
+                B[i_1, I] = tmp
+            end
+        end
+    else
+        R1 = CartesianIndices(axes(A)[1:dim-1])   # not type-stable
+        R2 = CartesianIndices(axes(A)[dim+1:end])
+        _accumulate!(op, B, A, R1, inds_t[dim], R2) # use function barrier
+    end
+    return B
+end
+
+"""
+    accumulate!(op, y, x::AbstractVector)
+
+Cumulative operation `op` on a vector `x`, storing the result in `y`.
+See also [`accumulate`](@ref).
+
+# Examples
+``jldoctest
+julia> x = [1, 0, 2, 0, 3];
+
+julia> y = [0, 0, 0, 0, 0];
+
+julia> accumulate!(+, y, x);
+
+julia> y
+5-element Array{Int64,1}:
+ 1
+ 1
+ 3
+ 3
+ 6
+```
+"""
+function accumulate!(op::Op, y, x::AbstractVector) where Op
+    isempty(x) && return y
+    v1 = first(x)
+    _accumulate1!(op, y, v1, x, 1)
+end
+
+@noinline function _accumulate!(op, B, A, R1, ind, R2)
+    # Copy the initial element in each 1d vector along dimension `dim`
+    ii = first(ind)
+    @inbounds for J in R2, I in R1
+        B[I, ii, J] = reduce_first(op, A[I, ii, J])
+    end
+    # Accumulate
+    @inbounds for J in R2, i in first(ind)+1:last(ind), I in R1
+        B[I, i, J] = op(B[I, i-1, J], A[I, i, J])
+    end
+    B
+end
+
+"""
+    accumulate(op, v0, x::AbstractVector)
+
+Like `accumulate`, but using a starting element `v0`. The first entry of the result will be
+`op(v0, first(A))`.
+
+# Examples
+```jldoctest
+julia> accumulate(+, 100, [1,2,3])
+3-element Array{Int64,1}:
+ 101
+ 103
+ 106
+
+julia> accumulate(min, 0, [1,2,-1])
+3-element Array{Int64,1}:
+  0
+  0
+ -1
+```
+"""
+function accumulate(op, v0, x::AbstractVector)
+    T = promote_op(op, typeof(v0), eltype(x))
+    out = similar(x, T)
+    accumulate!(op, out, v0, x)
+end
+
+function accumulate!(op, y, v0, x::AbstractVector)
+    isempty(x) && return y
+    v1 = op(v0, first(x))
+    _accumulate1!(op, y, v1, x, 1)
+end
+
+function _accumulate1!(op, B, v1, A::AbstractVector, dim::Integer)
+    dim > 0 || throw(ArgumentError("dim must be a positive integer"))
+    inds = linearindices(A)
+    inds == linearindices(B) || throw(DimensionMismatch("linearindices of A and B don't match"))
+    dim > 1 && return copyto!(B, A)
+    i1 = inds[1]
+    cur_val = reduce_first(op, v1)
+    B[i1] = cur_val
+    @inbounds for i in inds[2:end]
+        cur_val = op(cur_val, A[i])
+        B[i] = cur_val
+    end
+    return B
+end
diff --git a/base/multidimensional.jl b/base/multidimensional.jl
index 8c8997e053435..57dc95c12cf9d 100644
--- a/base/multidimensional.jl
+++ b/base/multidimensional.jl
@@ -680,405 +680,6 @@ _iterable(v) = Iterators.repeated(v)
     end
 end
 
-# see discussion in #18364 ... we try not to widen type of the resulting array
-# from cumsum or cumprod, but in some cases (+, Bool) we may not have a choice.
-rcum_promote_type(op, ::Type{T}, ::Type{S}) where {T,S<:Number} = promote_op(op, T, S)
-rcum_promote_type(op, ::Type{T}) where {T<:Number} = rcum_promote_type(op, T,T)
-rcum_promote_type(op, ::Type{T}) where {T} = T
-
-# handle sums of Vector{Bool} and similar.   it would be nice to handle
-# any AbstractArray here, but it's not clear how that would be possible
-rcum_promote_type(op, ::Type{Array{T,N}}) where {T,N} = Array{rcum_promote_type(op,T), N}
-
-# accumulate_pairwise slightly slower then accumulate, but more numerically
-# stable in certain situations (e.g. sums).
-# it does double the number of operations compared to accumulate,
-# though for cheap operations like + this does not have much impact (20%)
-function _accumulate_pairwise!(op::Op, c::AbstractVector{T}, v::AbstractVector, s, i1, n)::T where {T,Op}
-    @inbounds if n < 128
-        s_ = v[i1]
-        c[i1] = op(s, s_)
-        for i = i1+1:i1+n-1
-            s_ = op(s_, v[i])
-            c[i] = op(s, s_)
-        end
-    else
-        n2 = n >> 1
-        s_ = _accumulate_pairwise!(op, c, v, s, i1, n2)
-        s_ = op(s_, _accumulate_pairwise!(op, c, v, op(s, s_), i1+n2, n-n2))
-    end
-    return s_
-end
-
-function accumulate_pairwise!(op::Op, result::AbstractVector, v::AbstractVector) where Op
-    li = linearindices(v)
-    li != linearindices(result) && throw(DimensionMismatch("input and output array sizes and indices must match"))
-    n = length(li)
-    n == 0 && return result
-    i1 = first(li)
-    @inbounds result[i1] = v1 = v[i1]
-    n == 1 && return result
-    _accumulate_pairwise!(op, result, v, v1, i1+1, n-1)
-    return result
-end
-
-function accumulate_pairwise(op, v::AbstractVector{T}) where T
-    out = similar(v, rcum_promote_type(op, T))
-    return accumulate_pairwise!(op, out, v)
-end
-
-function cumsum!(out, v::AbstractVector; dims::Integer=1)
-    # we dispatch on the possibility of numerical stability issues
-    _cumsum!(out, v, dims, ArithmeticStyle(eltype(out)))
-end
-
-function _cumsum!(out, v, dim, ::ArithmeticRounds)
-    dim == 1 ? accumulate_pairwise!(+, out, v) : copyto!(out, v)
-end
-function _cumsum!(out, v, dim, ::ArithmeticUnknown)
-    _cumsum!(out, v, dim, ArithmeticRounds())
-end
-function _cumsum!(out, v, dim, ::ArithmeticStyle)
-    dim == 1 ? accumulate!(+, out, v) : copyto!(out, v)
-end
-
-"""
-    cumsum(A; dims::Integer)
-
-Cumulative sum along the dimension `dims`. See also [`cumsum!`](@ref)
-to use a preallocated output array, both for performance and to control the precision of the
-output (e.g. to avoid overflow).
-
-# Examples
-```jldoctest
-julia> a = [1 2 3; 4 5 6]
-2×3 Array{Int64,2}:
- 1  2  3
- 4  5  6
-
-julia> cumsum(a, dims=1)
-2×3 Array{Int64,2}:
- 1  2  3
- 5  7  9
-
-julia> cumsum(a, dims=2)
-2×3 Array{Int64,2}:
- 1  3   6
- 4  9  15
-```
-"""
-function cumsum(A::AbstractArray{T}; dims::Union{Nothing,Integer}=nothing) where T
-    if dims === nothing
-        depwarn("`cumsum(A::AbstractArray)` is deprecated, use `cumsum(A, dims=1)` instead.", :cumsum)
-        dims = 1
-    end
-    out = similar(A, rcum_promote_type(+, T))
-    cumsum!(out, A, dims=dims)
-end
-
-"""
-    cumsum(x::AbstractVector)
-
-Cumulative sum a vector. See also [`cumsum!`](@ref)
-to use a preallocated output array, both for performance and to control the precision of the
-output (e.g. to avoid overflow).
-
-# Examples
-```jldoctest
-julia> cumsum([1, 1, 1])
-3-element Array{Int64,1}:
- 1
- 2
- 3
-
-julia> cumsum([fill(1, 2) for i in 1:3])
-3-element Array{Array{Int64,1},1}:
- [1, 1]
- [2, 2]
- [3, 3]
-```
-"""
-cumsum(x::AbstractVector) = cumsum(x, dims=1)
-
-"""
-    cumsum!(B, A; dims::Integer)
-
-Cumulative sum of `A` along the dimension `dims`, storing the result in `B`. See also [`cumsum`](@ref).
-"""
-cumsum!(B, A; dims::Integer) = accumulate!(+, B, A, dims=dims)
-
-"""
-    cumprod(A; dims::Integer)
-
-Cumulative product along the dimension `dim`. See also
-[`cumprod!`](@ref) to use a preallocated output array, both for performance and
-to control the precision of the output (e.g. to avoid overflow).
-
-# Examples
-```jldoctest
-julia> a = [1 2 3; 4 5 6]
-2×3 Array{Int64,2}:
- 1  2  3
- 4  5  6
-
-julia> cumprod(a, dims=1)
-2×3 Array{Int64,2}:
- 1   2   3
- 4  10  18
-
-julia> cumprod(a, dims=2)
-2×3 Array{Int64,2}:
- 1   2    6
- 4  20  120
-```
-"""
-function cumprod(A::AbstractArray; dims::Union{Nothing,Integer}=nothing)
-    if dims === nothing
-        depwarn("`cumprod(A::AbstractArray)` is deprecated, use `cumprod(A, dims=1)` instead.", :cumprod)
-        dims = 1
-    end
-    return accumulate(*, A, dims=dims)
-end
-
-"""
-    cumprod(x::AbstractVector)
-
-Cumulative product of a vector. See also
-[`cumprod!`](@ref) to use a preallocated output array, both for performance and
-to control the precision of the output (e.g. to avoid overflow).
-
-# Examples
-```jldoctest
-julia> cumprod(fill(1//2, 3))
-3-element Array{Rational{Int64},1}:
- 1//2
- 1//4
- 1//8
-
-julia> cumprod([fill(1//3, 2, 2) for i in 1:3])
-3-element Array{Array{Rational{Int64},2},1}:
- [1//3 1//3; 1//3 1//3]
- [2//9 2//9; 2//9 2//9]
- [4//27 4//27; 4//27 4//27]
-```
-"""
-cumprod(x::AbstractVector) = cumprod(x, dims=1)
-
-"""
-    cumprod!(B, A; dims::Integer)
-
-Cumulative product of `A` along the dimension `dims`, storing the result in `B`.
-See also [`cumprod`](@ref).
-"""
-cumprod!(B, A; dims::Integer) = accumulate!(*, B, A, dims=dims)
-
-"""
-    cumprod!(y::AbstractVector, x::AbstractVector)
-
-Cumulative product of a vector `x`, storing the result in `y`.
-See also [`cumprod`](@ref).
-"""
-cumprod!(y::AbstractVector, x::AbstractVector) = cumprod!(y, x, dims=1)
-
-"""
-    accumulate(op, A; dims::Integer)
-
-Cumulative operation `op` along the dimension `dims`. See also
-[`accumulate!`](@ref) to use a preallocated output array, both for performance and
-to control the precision of the output (e.g. to avoid overflow). For common operations
-there are specialized variants of `accumulate`, see:
-[`cumsum`](@ref), [`cumprod`](@ref)
-
-# Examples
-```jldoctest
-julia> accumulate(+, fill(1, 3, 3), dims=1)
-3×3 Array{Int64,2}:
- 1  1  1
- 2  2  2
- 3  3  3
-
-julia> accumulate(+, fill(1, 3, 3), dims=2)
-3×3 Array{Int64,2}:
- 1  2  3
- 1  2  3
- 1  2  3
-```
-"""
-function accumulate(op, A; dims::Integer)
-    out = similar(A, rcum_promote_type(op, eltype(A)))
-    accumulate!(op, out, A, dims=dims)
-end
-
-"""
-    accumulate(op, x::AbstractVector)
-
-Cumulative operation `op` on a vector. See also
-[`accumulate!`](@ref) to use a preallocated output array, both for performance and
-to control the precision of the output (e.g. to avoid overflow). For common operations
-there are specialized variants of `accumulate`, see:
-[`cumsum`](@ref), [`cumprod`](@ref)
-
-# Examples
-```jldoctest
-julia> accumulate(+, [1,2,3])
-3-element Array{Int64,1}:
- 1
- 3
- 6
-
-julia> accumulate(*, [1,2,3])
-3-element Array{Int64,1}:
- 1
- 2
- 6
-```
-"""
-accumulate(op, x::AbstractVector) = accumulate(op, x, dims=1)
-
-"""
-    accumulate!(op, B, A; dims::Integer)
-
-Cumulative operation `op` on `A` along the dimension `dims`, storing the result in `B`.
-See also [`accumulate`](@ref).
-
-# Examples
-```jldoctest
-julia> A = [1 2; 3 4];
-
-julia> B = [0 0; 0 0];
-
-julia> accumulate!(-, B, A, dims=1);
-
-julia> B
-2×2 Array{Int64,2}:
-  1   2
- -2  -2
-
-julia> accumulate!(-, B, A, dims=2);
-
-julia> B
-2×2 Array{Int64,2}:
- 1  -1
- 3  -1
-```
-"""
-function accumulate!(op, B, A; dims::Integer)
-    dim = dims
-    dim > 0 || throw(ArgumentError("dim must be a positive integer"))
-    inds_t = axes(A)
-    axes(B) == inds_t || throw(DimensionMismatch("shape of B must match A"))
-    dim > ndims(A) && return copyto!(B, A)
-    isempty(inds_t[dim]) && return B
-    if dim == 1
-        # We can accumulate to a temporary variable, which allows
-        # register usage and will be slightly faster
-        ind1 = inds_t[1]
-        @inbounds for I in CartesianIndices(tail(inds_t))
-            tmp = convert(eltype(B), A[first(ind1), I])
-            B[first(ind1), I] = tmp
-            for i_1 = first(ind1)+1:last(ind1)
-                tmp = op(tmp, A[i_1, I])
-                B[i_1, I] = tmp
-            end
-        end
-    else
-        R1 = CartesianIndices(axes(A)[1:dim-1])   # not type-stable
-        R2 = CartesianIndices(axes(A)[dim+1:end])
-        _accumulate!(op, B, A, R1, inds_t[dim], R2) # use function barrier
-    end
-    return B
-end
-
-"""
-    accumulate!(op, y, x::AbstractVector)
-
-Cumulative operation `op` on a vector `x`, storing the result in `y`.
-See also [`accumulate`](@ref).
-
-# Examples
-``jldoctest
-julia> x = [1, 0, 2, 0, 3];
-
-julia> y = [0, 0, 0, 0, 0];
-
-julia> accumulate!(+, y, x);
-
-julia> y
-5-element Array{Int64,1}:
- 1
- 1
- 3
- 3
- 6
-```
-"""
-function accumulate!(op::Op, y, x::AbstractVector) where Op
-    isempty(x) && return y
-    v1 = first(x)
-    _accumulate1!(op, y, v1, x, 1)
-end
-
-@noinline function _accumulate!(op, B, A, R1, ind, R2)
-    # Copy the initial element in each 1d vector along dimension `dim`
-    ii = first(ind)
-    @inbounds for J in R2, I in R1
-        B[I, ii, J] = A[I, ii, J]
-    end
-    # Accumulate
-    @inbounds for J in R2, i in first(ind)+1:last(ind), I in R1
-        B[I, i, J] = op(B[I, i-1, J], A[I, i, J])
-    end
-    B
-end
-
-"""
-    accumulate(op, v0, x::AbstractVector)
-
-Like `accumulate`, but using a starting element `v0`. The first entry of the result will be
-`op(v0, first(A))`.
-
-# Examples
-```jldoctest
-julia> accumulate(+, 100, [1,2,3])
-3-element Array{Int64,1}:
- 101
- 103
- 106
-
-julia> accumulate(min, 0, [1,2,-1])
-3-element Array{Int64,1}:
-  0
-  0
- -1
-```
-"""
-function accumulate(op, v0, x::AbstractVector)
-    T = rcum_promote_type(op, typeof(v0), eltype(x))
-    out = similar(x, T)
-    accumulate!(op, out, v0, x)
-end
-
-function accumulate!(op, y, v0, x::AbstractVector)
-    isempty(x) && return y
-    v1 = op(v0, first(x))
-    _accumulate1!(op, y, v1, x, 1)
-end
-
-function _accumulate1!(op, B, v1, A::AbstractVector, dim::Integer)
-    dim > 0 || throw(ArgumentError("dim must be a positive integer"))
-    inds = linearindices(A)
-    inds == linearindices(B) || throw(DimensionMismatch("linearindices of A and B don't match"))
-    dim > 1 && return copyto!(B, A)
-    i1 = inds[1]
-    cur_val = v1
-    B[i1] = cur_val
-    @inbounds for i in inds[2:end]
-        cur_val = op(cur_val, A[i])
-        B[i] = cur_val
-    end
-    return B
-end
-
 diff(a::AbstractVector) = [ a[i+1] - a[i] for i=1:length(a)-1 ]
 
 """
diff --git a/base/sysimg.jl b/base/sysimg.jl
index 6f1ba531e317f..775c549bafcec 100644
--- a/base/sysimg.jl
+++ b/base/sysimg.jl
@@ -350,6 +350,7 @@ INCLUDE_STATE = 2 # include = _include (from lines above)
 
 # reduction along dims
 include("reducedim.jl")  # macros in this file relies on string.jl
+include("accumulate.jl")
 
 # basic data structures
 include("ordering.jl")
diff --git a/stdlib/SparseArrays/src/sparsematrix.jl b/stdlib/SparseArrays/src/sparsematrix.jl
index bbf0797a0e8c3..cef301cf63036 100644
--- a/stdlib/SparseArrays/src/sparsematrix.jl
+++ b/stdlib/SparseArrays/src/sparsematrix.jl
@@ -2306,7 +2306,7 @@ function getindex(A::SparseMatrixCSC{Tv,Ti}, I::AbstractArray) where {Tv,Ti}
             end
         end
     end
-    colptrB = cumsum(colptrB)
+    cumsum!(colptrB,colptrB)
     if n > (idxB-1)
         deleteat!(nzvalB, idxB:n)
         deleteat!(rowvalB, idxB:n)
diff --git a/test/arrayops.jl b/test/arrayops.jl
index 3c3db385315c0..034d8cd4d9f56 100644
--- a/test/arrayops.jl
+++ b/test/arrayops.jl
@@ -2059,9 +2059,12 @@ end
 # issue #18363
 @test_throws DimensionMismatch cumsum!([0,0], 1:4)
 @test cumsum(Any[])::Vector{Any} == Any[]
-@test cumsum(Any[1, 2.3])::Vector{Any} == [1, 3.3] == cumsum(Real[1, 2.3])::Vector{Real}
+@test cumsum(Any[1, 2.3]) == [1, 3.3] == cumsum(Real[1, 2.3])::Vector{Real}
 @test cumsum([true,true,true]) == [1,2,3]
-@test cumsum(0x00:0xff)[end] === 0x80 # overflow
+@test cumsum(0x00:0xff)[end] === UInt(255*(255+1)÷2) # no overflow
+@test accumulate(+, 0x00:0xff)[end] === 0x80         # overflow
+@test_throws InexactError cumsum!(similar(0x00:0xff), 0x00:0xff) # overflow
+
 @test cumsum([[true], [true], [false]])::Vector{Vector{Int}} == [[1], [2], [2]]
 
 #issue #18336
@@ -2278,6 +2281,13 @@ end
     op(x,y) = 2x+y
     @test accumulate(op, [10,20, 30]) == [10, op(10, 20), op(op(10, 20), 30)] == [10, 40, 110]
     @test accumulate(op, [10 20 30], dims=2) == [10 op(10, 20) op(op(10, 20), 30)] == [10 40 110]
+
+    #25506
+    @test accumulate((acc, x) -> acc+x[1], 0, [(1,2), (3,4), (5,6)]) == [1, 4, 9]
+    @test accumulate(*, ['a', 'b']) == ["a", "ab"]
+    @inferred accumulate(*, String[])
+    @test accumulate(*, ['a' 'b'; 'c' 'd'], dims=1) == ["a" "b"; "ac" "bd"]
+    @test accumulate(*, ['a' 'b'; 'c' 'd'], dims=2) == ["a" "ab"; "c" "cd"]
 end
 
 struct F21666{T <: Base.ArithmeticStyle}