diff --git a/Marlin/src/HAL/STM32F1/onboard_sd.h b/Marlin/src/HAL/STM32F1/onboard_sd.h
index f228d068c9db..f8846e95bcaa 100644
--- a/Marlin/src/HAL/STM32F1/onboard_sd.h
+++ b/Marlin/src/HAL/STM32F1/onboard_sd.h
@@ -1,11 +1,31 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
 /*-----------------------------------------------------------------------
-/ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 / * Copyright (c) 2019 BigTreeTech [https://github.com/bigtreetech]
-/ * Low level disk interface module include file   (C)ChaN, 2015
+/ * Low level disk interface module include file (c) ChaN, 2015
 /-----------------------------------------------------------------------*/
 
-#pragma once
-
 #define _DISKIO_WRITE   1   /* 1: Enable disk_write function */
 #define _DISKIO_IOCTL   1   /* 1: Enable disk_ioctl function */
 #define _DISKIO_ISDIO   0   /* 1: Enable iSDIO control function */
diff --git a/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3_common.h b/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3_common.h
index 603da09d14ef..d26811199bc8 100644
--- a/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3_common.h
+++ b/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3_common.h
@@ -19,7 +19,6 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
-
 #pragma once
 
 //