Numark Mixtrack Pro 3

Numark Mixtrack (Pro) 3

• Manufacturer's product page
• Forum thread
• Download mapping - current version: 2.0

The Numark Mixtrack 3 and Numark Mixtrack Pro 3 are the same controller except that the Pro version has an integrated 4 channel output sound card and costs $100 more. If you use the non-Pro version, you would need a splitter cable or separate sound card to be able to preview tracks in headphones.

Configuration options

Configuration options can be set in the mapping. You will need to edit the values below at the very top of the JavaScript file “Numark-Mixtrack-3-scripts.js” and save changes. Allowed values are “true” or “false”

• TrackEndWarning: whether the Wheel button flashes near the end of a track
• iCutEnabled: whether to enable iCut with the jog wheel. See #platter/jog wheel section for details
• fastSeekEnabled: whether to enable fast seeking with the jog wheel. See #platter/jog wheel section for details
• smartPFL: When the Load button is used, the Cue/PFL button is automatically activated on the deck being loaded and deactivated on the other deck
• beatlooprollActivate: Use beatlooproll (slip mode loop) instead of beatloop command when using pads in Autoloop mode
• DarkMetalSkin: Specify if Dark Metal skin is used for your installation. This is required in order for Expand Library feature to work properly.
• noPlayOnSyncDoublePress: Specify if Play is disabled on Sync button Double Press.

Mapping

1. Browser Knob

Rotate this knob to cycle through tracks in main library window. Press the Knob to expand library view.
Shift + Turn: allows selecting Play Lists and side navigation bar items.
Shift + Push: opens / closes selected side navigation bar item.

2. Master Gain

Adjusts the master volume in the software.
Note: This control does not affect the microphone volume which is summed with the final output of the Master Gain to the Master Output. Use the Mic Gain knob to control the microphone volume.

3. Cue Mix

Adjusts the software’s audio output to the headphones, mixing between the cue (PFL) output and the master mix output.

4. Cue Gain

Adjusts the volume for headphone cueing in the software.

5. Load

Press one of these buttons while a track is selected in the library window to assign it to Deck 1 and 2, respectively, in the software.
Shift + Load: Activates Fader Start mode for the corresponding (PFL Button is then blinking). Fader start guide: In fader start mode, not only you can press the play/pause button to play/pause the track, but if you move up the level fader (the volume fader if you prefer) of the deck, the track will be played and if you close it to zero, the track will be paused.
Configurable option:
If the smartPFL option is set to true, the Cue/PFL button is automatically activated on the deck being loaded and deactivated on the other deck.

6. High EQ Knobs

Adjust High frequencies of the deck
Shift + High : Adjust FX 1, parameter 1 of the Effect Unit assigned to the deck
Padmode + high : Adjust FX 2, parameter 1 of the Effect Unit assigned to the deck
Tap + high : Adjust FX 2, parameter 1 of the Effect Unit assigned to the deck

7. Mid EQ Knobs

Adjust Mid frequencies of the deck
Shift + Mid: Adjust FX 1, parameter 2 of the Effect Unit assigned to the deck
Padmode + Mid: Adjust FX 2, parameter 2 of the Effect Unit assigned to the deck
Tap + Mid: Adjust FX 3, parameter 2 of the Effect Unit assigned to the deck

8 Low EQ Knobs

Adjust Low frequencies of the deck
Shift + Mid: Adjust FX 1, parameter 3 of the Effect Unit assigned to the deck
Padmode + Mid: Adjust FX 2, parameter 3 of the Effect Unit assigned to the deck
Tap + Mid: Adjust FX 3 parameter 3 of the Effect Unit assigned to the deck

9. Filter

Adjusts the amount of the filter effect. Turning the knob left controls the low pass filter; turning it right controls the high pass filter.
Shift + Filter: Adjust FX 1, parameter 4 of the Effect Unit assigned to the deck
Padmode + Filter: Adjust FX 2, parameter 4 of the Effect Unit assigned to the deck
Tap + Filter: Adjust FX 3, parameter 4 of the Effect Unit assigned to the deck

10. Cue/PFL/Headphones

Sends pre-fader audio to the headphone output
SHIFT + press: toggle slip mode
SHIFT + double press: toggle quantize mode

11. Volume fader

Adjusts the volume of the deck

12. Crossfader

Controls the blend between the two decks

13-14. Pitch Bend Down/Up

Press and hold to momentarily reduce the speed of the track.
Shift+Pitch Bend Down/Up: Jump 1 beat backward/forward

15. Pitch Fader

Adjust the speed of the music (activate keylock to adjust tempo without affecting pitch). Note that moving the fader down increases speed, as marked by the "+" at the bottom of the fader on the controller. This can be reversed in Mixxx's preferences under Interface > Speed slider direction

16. Touch Strip

Left Strip: Use the Touch Strip to adjust the Effect Rack 1 Superknob
Right Strip: Use the Touch Strip to adjust the Effect Rack 1 Dry/Wet mix ratio
Shift + Touch Strip: search through a track’s timeline

17. Beats Multiplier

Moves the beat grid left (turn counterclockwise) or right (turn clockwise)
Shift + Beats: adjust beatgrid size Configurable option:
If BeatKnobAsSamplerVolume is set to "true", use Beat knob to adjust Sampler Volume. Deck 1 beat knob will adjusts Samplers 1-4; Deck 2 knob will adjusts Samplers 5-8. Shift + Beat knob will move the beat grid.

18-20. FX 1/2/3 On/Off

Assigns selected deck to Effect Rack 1, Unit 1/2/3
Shift + FX1/2/3 to select from the list of available effects for the respective effect unit. Left deck selects the previous effect, right deck selects the next effect.

21. Tap BPM

Press this 4 or more times on beat to manually enter a new BPM. The software will ignore the track's BPM and follow your manually entered tempo.

22. Wheel button

Activate this button to use the platter/jog wheel to grab and move the audio, scratching the track like a vinyl record.

23. Platter/Jog Wheel

Touch side: Pitch bend if track is playing (Wheel On & Off) / track positioning (Wheel On)
Wheel On + Touch platter: scratching: touch the platter and move it
Shift + Wheel On + Touch platter: iCut mode: simulates a scratch routine with the jog wheel. When the jog wheel is turned back, the crossfader closes; when the jog wheel is turned forward the crossfader will open. As a visual reference, TAP LED and Wheel button LED will be ON.
Wheel Button Off + Touch platter: No action (Wheel is off!)
Shift + Wheel Off + Touch platter: fast seek through track

Configuration Options: The iCutEnabled and fastSeekEnabled options can be used to turn off iCut and fast seeking. These options may be helpful to avoid accidentally using these features when touching the platter with shift lock on.

24. Shift

Allows multiple control commands to be triggered when pressed first along with other buttons
Single Press : Temporary SHIFT
Double press (like a double click): SHIFT Lock enabled (TAP LED will remain ON if Shift Lock is enabled)
Press and release: toggle off SHIFT Lock if enabled

25. Pad Mode

This is used to change the operation mode of the top 4 performance pads. Pressing this button will light the pad indicating the currently active mode (Manual Loop, Auto Loop or Sampler).

26. Sync

Enables BPM syncing between decks.
Short Press: Press once to synchronize the tempo (BPM) to that of to that of the other track
Double Press: press twice QUICKLY to play the track immediately synchronized to the tempo (BPM) and to the phase of the other track, if the track was paused
Long Press (Sync Lock): Hold for at least half of a second to enable sync lock for this deck. Decks with sync locked will all play at the same tempo, and decks that also have quantize enabled will always have their beats lined up. If the Sync Lock was previously activated, it just deactivates it regardless of the Short press/Double Press
Shift + Sync: Toggle Key Lock

Configuration Options: The noPlayOnSyncDoublePress option can be used to turn off Play on Sync Double Press.

27. Cue (Transport Control)

Behavior depends on the cue mode set in the Mixxx preferences.
Shift + Cue: return the play head to the start of the track.

28. Play/Pause

Starts and suspends playback. If no track is loaded, loads the selected track (if any) and play.
Shift + Play/Pause: stutter the track from the last set cue point. If a cue point has not been set, the play head will return to the start of the track.

29. Performance Pads

The top row of pads is for controlling loops and samples. To select a mode, hold down the Pad Mode button and press one of the upper pads. An LED under the pad section indicates the currently selected mode. See the subsections below for details about each mode.

The bottom row of pads is used to trigger hotcue points. If a hotcue point has not already been set for the loaded track, this control will mark the hotcue point. If a hotcue point has already been set, this control will jump to it.
Shift + Hot Cue: Deletes the assigned hotcue point

Manual Loop Mode

Hold Pad Mode and press the pad marked Manual Loop (silkscreened above the pad) to assign the lower 4 pads to the functions listed below:

• Loop In – Sets the beginning of a loop: When assigned, the Pad LED will light blue
• Loop Out – Sets the end point for the loop: When assigned, the Pad LED will light blue
• On/Off – (De)activate the loop. If a loop has not been set, this button will have no effect.: When assigned, the Pad LED will light blue
• Loop x1/2 – Halve the length of the loop. Press Shift + Loop x1/2 to double the length of the loop.

Auto Loop Mode

Hold Pad Mode and press the pad marked Autoloop to assign the lower 4 pads to the functions listed below: When assigned, the respective Pad LED will blink Yellow
* Auto 1 – Sets and starts playback of a 2-beat autoloop.

• Auto 2 – Sets and starts playback of a 4-beat autoloop.
• Auto 3 – Sets and starts playback of a 8-beat autoloop.
• Auto 4 – Sets and starts playback of a 16-beat autoloop.
  * Shift + Auto 1 – Sets and starts playback of a 1/8-beat autoloop.
• Shift + Auto 2 – Sets and starts playback of a 1/4-beat autoloop.
• Shift + Auto 3 – Sets and starts playback of a 1/2-beat autoloop.
• Shift + Auto 4 – Sets and starts playback of a 1-beat autoloop.

Configuration Option: If the PADLoopButtonPressed option is set to true, the loop will only be active while the pad is held down.

Sample Mode

Hold Pad Mode and press the pad marked Sampler to assign the lower 4 pads to the functions listed below. When assigned, the respective Pad LED will blink Purple
Shift + Sample X will play loaded sample, but with Sampler unit Sync disabled

• Deck 1 - Sample 1 – Plays the sample assigned to Sample Pad 1 with the unit Sync activated.
• Deck 1 - Sample 2 – Plays the sample assigned to Sample Pad 2 with the unit Sync activated.
• Deck 1 - Sample 3 – Plays the sample assigned to Sample Pad 3 with the unit Sync activated.
• Deck 1 - Sample 4 – Plays the sample assigned to Sample Pad 4 with the unit Sync activated.
• Deck 2 - Sample 1 – Plays the sample assigned to Sample Pad 5 with the unit Sync activated.
• Deck 2 - Sample 2 – Plays the sample assigned to Sample Pad 6 with the unit Sync activated.
  * Deck 2 - Sample 3 – Plays the sample assigned to Sample Pad 7 with the unit Sync activated.
  * Deck 2 - Sample 4 – Plays the sample assigned to Sample Pad 8 with the unit Sync activated.

Configuration Option: If the PADSampleButtonPressed option is set to true, the sample will only play as long as the pad is held down.

30. Master Output LEDs

Displays the audio level going to the Master Output.