We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Flashed a brand new Lanbon L8 over serial with the latest firmware, there is extensive screen corruption and the firmware is unusable on my device.
Flash new device using latest firmware Configure device for WiFi and MQTT Upload sample jsonl file for 3-relay example
Device works, screen is responsive and clear
The text was updated successfully, but these errors were encountered:
What is the PCB version noted on the board, just below the pinheader? If it is v1.17 it sounds a lot like this frequency issue.
Sorry, something went wrong.
It is indeed v1.17
I set the SPI frequency to 60MHz in the development branch. Feel free to test it. The build is available at the bottom of this page.
Thank you. I ran a custom build and amended the speed and it does indeed work fine. Thank you for confirming this issue and also for the fix.
Thanks, this will be the new default setting in v0.6.3, since v1.17 PCB are getting more common these days.
fvanroie
No branches or pull requests
Perform all steps below and tick them with [x]
Describe the bug
Flashed a brand new Lanbon L8 over serial with the latest firmware, there is extensive screen corruption and the firmware is unusable on my device.
To Reproduce
Flash new device using latest firmware
Configure device for WiFi and MQTT
Upload sample jsonl file for 3-relay example
Expected behavior
Device works, screen is responsive and clear
Screenshots or video
FullSizeRender.mp4
The text was updated successfully, but these errors were encountered: