README.md

The photoprism port for FreeBSD

The port will compile and install photoprism from source on FreeBSD.

Dependencies

This port depends on science/libtensorflow1

• freshports
• Git repo

You can install it by freebsd ports or build a private copy using poudriere.

If you need pre-built binaries you can use this repo

AVX2 is required for your CPU.

https://github.com/Gaojianli/photoprism-freebsd-port/releases

Install using ports

Download and Install

git clone https://github.com/huo-ju/photoprism-freebsd-port
cd photoprism-freebsd-port
make && make install

Upgrade from an old version

cd photoprism-freebsd-port
git pull
make reinstall clean

Poudriere

If you are using poudriere to build the port, you will need to set the following in poudriere.conf:

• ALLOW_NETWORKING_PACKAGES="photoprism" as the dep-js target downloads node packages.
• TMPFS_LIMIT or MFSSIZE should be at least 6 as the build is very large.
• MAX_MEMORY=16 or more is required for node

Add entries to rc.conf

photoprism_enable="YES"
photoprism_assetspath="/var/db/photoprism/assets"
photoprism_storagepath="/var/db/photoprism/storage"

Set an initial admin password (fresh install)

photoprism --assets-path=/var/db/photoprism/assets --storage-path=/var/db/photoprism/storage --originals-path=/var/db/photoprism/storage/originals --import-path=/var/db/photoprism/storage/import passwd

Run the service

service photoprism start

Go to http://your_server_IP_address:2342/ in your browser