diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index cc5b0a88ad01..4956505ce9cc 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -1031,7 +1031,7 @@
  * Override with M203
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
-#define DEFAULT_MAX_FEEDRATE          { 500, 500, 10, 25 }  // MRiscoC increased Z speed, increased E speed for BMG
+#define DEFAULT_MAX_FEEDRATE          { 500, 500, 10, 50 }  // MRiscoC increased Z speed, increased E speed for BMG
 
 //#define LIMITED_MAX_FR_EDITING        // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
 #if ENABLED(LIMITED_MAX_FR_EDITING)
@@ -1044,7 +1044,7 @@
  * Override with M201
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
-#define DEFAULT_MAX_ACCELERATION      { 1000, 1000, 150, 1000 }  // MRiscoC Acceleration limits increased
+#define DEFAULT_MAX_ACCELERATION      { 500, 500, 100, 5000 }  // MRiscoC Acceleration limits increased
 
 //#define LIMITED_MAX_ACCEL_EDITING     // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
 #if ENABLED(LIMITED_MAX_ACCEL_EDITING)
@@ -1060,8 +1060,8 @@
  *   M204 T    Travel Acceleration
  */
 #define DEFAULT_ACCELERATION          500    // X, Y, Z and E acceleration for printing moves
-#define DEFAULT_RETRACT_ACCELERATION  500    // E acceleration for retracts
-#define DEFAULT_TRAVEL_ACCELERATION   1000    // X, Y, Z acceleration for travel (non printing) moves
+#define DEFAULT_RETRACT_ACCELERATION  1000    // E acceleration for retracts  // Ender3v2 Configs
+#define DEFAULT_TRAVEL_ACCELERATION   500    // X, Y, Z acceleration for travel (non printing) moves  // Ender3v2 Configs
 
 /**
  * Default Jerk limits (mm/s)
@@ -1073,9 +1073,9 @@
  */
 #define CLASSIC_JERK
 #if ENABLED(CLASSIC_JERK)
-  #define DEFAULT_XJERK 10.0
-  #define DEFAULT_YJERK 10.0
-  #define DEFAULT_ZJERK  0.3
+  #define DEFAULT_XJERK 8.0  // Ender3v2 Configs
+  #define DEFAULT_YJERK 8.0  // Ender3v2 Configs
+  #define DEFAULT_ZJERK  0.4  // Ender3v2 Configs
   //#define DEFAULT_IJERK  0.3
   //#define DEFAULT_JJERK  0.3
   //#define DEFAULT_KJERK  0.3
@@ -1375,8 +1375,8 @@
 #define Z_PROBE_LOW_POINT          -4 // Farthest distance below the trigger-point to go before stopping  // MRiscoC allows reach lower points
 
 // For M851 give a range for adjusting the Z probe offset
-#define Z_PROBE_OFFSET_RANGE_MIN -10
-#define Z_PROBE_OFFSET_RANGE_MAX 10
+#define Z_PROBE_OFFSET_RANGE_MIN -20
+#define Z_PROBE_OFFSET_RANGE_MAX 20
 
 // Enable the M48 repeatability test to test probe accuracy
 #define Z_MIN_PROBE_REPEATABILITY_TEST
@@ -2036,7 +2036,7 @@
 
 #if ENABLED(NOZZLE_PARK_FEATURE)
   // Specify a park position as { X, Y, Z_raise }
-  #define NOZZLE_PARK_POINT { (X_MAX_POS - 25), (Y_MAX_POS - 10), 10 }
+  #define NOZZLE_PARK_POINT { (X_MAX_POS - 25), (Y_MAX_POS - 10), 20 }
   #define NOZZLE_PARK_MOVE          0   // Park motion: 0 = XY Move, 1 = X Only, 2 = Y Only, 3 = X before Y, 4 = Y before X
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)