From 225c100fea4ea0f3400026e10512a3e009412063 Mon Sep 17 00:00:00 2001
From: ljlzonda <1500011309@pku.edu.cn>
Date: Mon, 5 Apr 2021 18:54:07 +0800
Subject: [PATCH 1/5] Add files via upload
---
zh_cn_ljl.json | 472 +++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 472 insertions(+)
create mode 100644 zh_cn_ljl.json
diff --git a/zh_cn_ljl.json b/zh_cn_ljl.json
new file mode 100644
index 0000000..8e6ef93
--- /dev/null
+++ b/zh_cn_ljl.json
@@ -0,0 +1,472 @@
+{
+ "@metadata": {
+ "authors": [
+ "hsu8116"
+ ],
+ "last-updated": "2020-12-18",
+ "locale": "zh",
+ "message-documentation": "qqq"
+ },
+ "aux.0": "--",
+ "aux.1": "低",
+ "aux.2": "中低",
+ "aux.3": "中",
+ "aux.4": "中高",
+ "aux.5": "高",
+ "aux.6": "旋钮",
+ "breakpoint.1": "零油门",
+ "breakpoint.2": "断点 1",
+ "breakpoint.3": "断点 2",
+ "breakpoint.4": "满油门",
+ "button.activate": "激活",
+ "button.activation-failed": "激活失败 请重新尝试",
+ "button.backup": "备份",
+ "button.calibrate-accelerometer": "校准加速度计",
+ "button.download-firmware": "下载固件",
+ "button.esc-flasher-accept": "我已了解风险",
+ "button.flash-firmware": "刷写固件",
+ "button.reset-model": "重置模型",
+ "button.restore": "恢复",
+ "button.save": "保存",
+ "button.saved": "已保存",
+ "button.saving": "保存中...",
+ "button.select-firmware": "选择本地固件",
+ "button.select-remote-firmware": "选择网络固件",
+ "button.share": "分享",
+ "button.test": "测试",
+ "column.3d": "3D",
+ "column.3d-mode": "3D 模式",
+ "column.PentaForward": "向前",
+ "column.PentaHover": "悬停",
+ "column.RealPit": "RealPit",
+ "column.adaptive-filter": "开启自适应滤波器",
+ "column.altitude": "海拔:",
+ "column.angle-x": "X角度:",
+ "column.angle-y": "Y角度:",
+ "column.arm": "解锁",
+ "column.battery-voltage": "鋰電池電壓 [V]",
+ "column.buzzer": "蜂鸣器",
+ "column.buzzer-emulation": "电机蜂鸣",
+ "column.course": "航向:",
+ "column.custom-tpa-influence": "使用自定义的 TPA 影响值",
+ "column.d": "D",
+ "column.debug-fields": "调试数据域",
+ "column.device": "设备",
+ "column.direction": "朝向",
+ "column.distance": "距离",
+ "column.dji.osd.crosshair": "中心十字准线",
+ "column.dji.osd.gps": "GPS",
+ "column.dji.osd.layout": "布局",
+ "column.dji.osd.units": "单位",
+ "column.esc-3dmode": "3D模式",
+ "column.esc-mode": "电调协议",
+ "column.esc-number": "电调",
+ "column.esc-reverse": "反向",
+ "column.fc-orientation": "飞控旋转角度 °",
+ "column.i": "I",
+ "column.idle": "CPU负载:",
+ "column.influence-percentage": "影响值 [%]",
+ "column.lap-timer-type": "連接類型",
+ "column.latitude": "纬度:",
+ "column.launchMode": "启用弹射模式",
+ "column.led": "LED",
+ "column.led-brightness": "LED 亮度",
+ "column.led-color": "设置颜色",
+ "column.level": "自稳",
+ "column.level-max": "最大角度",
+ "column.lipo-mah": "消耗电量大于 (mAh) ",
+ "column.lipo-volts": "电压小于 (V) ",
+ "column.longitude": "经度:",
+ "column.lpf-frequency": "低通滤波器截止频率",
+ "column.max-throttle": "最大油门值",
+ "column.mid-command": "指令中点",
+ "column.min-command": "指令低点",
+ "column.min-throttle": "最小油门值",
+ "column.mode": "模式:",
+ "column.nonStandardDshot": "DShot non-standard led signal",
+ "column.notch-center": "中心频率: (Hz)",
+ "column.notch-cutoff": "截止频率: (Hz)",
+ "column.p": "P",
+ "column.pid-strength-percentage": "PID 強度 [%]",
+ "column.pid-voltage-correction": "PID 電壓校正",
+ "column.pitch": "Pitch",
+ "column.rc-curve": "RC 曲线",
+ "column.rc-expo": "RATE",
+ "column.rc-rate": "RC Rate",
+ "column.relativeAlt": "相对海拔",
+ "column.reverse-motors": "反转 Yaw 控制方向（电机反转）",
+ "column.roll": "Roll",
+ "column.rth": "返航",
+ "column.rth.descent.radius": "下降半径 (m)",
+ "column.rth.failsafe.action": "失控时返航",
+ "column.rth.home.action": "返航点动作",
+ "column.rth.home.altitude": "返航点高度 (m)",
+ "column.rth.hover.throttle": "悬停油门 (0 - 自动)",
+ "column.rth.max.throttle": "最大油门 (0 - 自动)",
+ "column.rth.min.throttle": "最小油门 (0 - 自动)",
+ "column.rth.return.altitude": "返航高度 (m) (0 - 自动)",
+ "column.rth.return.speed": "返航速度 (km/h)",
+ "column.runcam-split": "RunCam Split",
+ "column.rx-deadband": "死区区间",
+ "column.satellites": "卫星数:",
+ "column.setpoint-weight": "设定点权重 (%)",
+ "column.speed": "速度:",
+ "column.status": "状态:",
+ "column.throttle": "油门",
+ "column.throttle-percentage": "油门 [%]",
+ "column.tpa": "TPA",
+ "column.tri-yaw-invert": "三轴 YAW 舵机反向",
+ "column.tri-yaw-mid": "三轴 YAW 舵机中点",
+ "column.turtle-mode": "反乌龟",
+ "column.use-custom-orientation": "使用自定义朝向",
+ "column.use-custom-serialconfiguration": "使用高级串口配置",
+ "column.voltage": "电压:",
+ "column.vtx-band": "圖傳頻段",
+ "column.vtx-channel": "圖傳頻道",
+ "column.vtx-frequency": "频率",
+ "column.vtx-high-power": "高功率 (mW) ",
+ "column.vtx-low-power": "低功率 (mW) ",
+ "column.vtx-power": "图传功率",
+ "column.vtx-type": "类型",
+ "column.yaw": "Yaw",
+ "column.yaw-filter-strength": "Yaw 滤波强度",
+ "debug.0": "--",
+ "debug.1": "原始陀螺仪数据",
+ "debug.2": "原始加速度计数据",
+ "debug.3": "循環參數",
+ "debug.4": "电调电压",
+ "debug.5": "电调电流",
+ "debug.6": "电调温度",
+ "debug.7": "电调 RPM",
+ "debug.8": "电调电量消耗",
+ "debug.9": "滤波器频率",
+ "escOrientation.0": "默认",
+ "escOrientation.1": "顺时针旋转90°",
+ "escOrientation.10": "BF 逆时针旋转90°",
+ "escOrientation.11": "BF 顺/逆时针旋转180°",
+ "escOrientation.12": "BF 上下翻转",
+ "escOrientation.13": "BF 上下翻转后顺时针旋转90°",
+ "escOrientation.14": "BF 上下翻转后逆时针旋转90°",
+ "escOrientation.15": "BF 上下翻转后旋转180°",
+ "escOrientation.2": "逆时针旋转90°",
+ "escOrientation.3": "顺/逆时针旋转180°",
+ "escOrientation.4": "上下翻转",
+ "escOrientation.5": "上下翻转后顺时针旋转90°",
+ "escOrientation.6": "上下翻转后逆时针旋转90°",
+ "escOrientation.7": "上下翻转后旋转180°",
+ "escOrientation.8": "BF",
+ "escOrientation.9": "BF 顺时针旋转90°",
+ "filter.0": "关",
+ "filter.1": "高",
+ "filter.2": "中高",
+ "filter.3": "中",
+ "filter.4": "中低",
+ "filter.5": "低",
+ "filter.6": "极低",
+ "filter.7": "高级设置",
+ "lap-timer.0": "--",
+ "lap-timer.17": "EeasyRaceLapTimer on BUZZER pin",
+ "lap-timer.18": "EeasyRaceLapTimer on PWM5 pin",
+ "lap-timer.19": "EeasyRaceLapTimer on PWM6 pin",
+ "led.black": "黑色",
+ "led.blue": "蓝色",
+ "led.custom": "自定义",
+ "led.cyan": "青色",
+ "led.green": "绿色",
+ "led.orange": "橙色",
+ "led.purple": "紫色",
+ "led.red": "红色",
+ "led.white": "白色",
+ "led.yellow": "黄色",
+ "legend.1": "陀螺仪 X",
+ "legend.10": "电调共计消耗 A/h",
+ "legend.11": "电调最大 eRpM",
+ "legend.12": "电调最大功率",
+ "legend.13": "ESC on PWM1",
+ "legend.14": "ESC on PWM2",
+ "legend.15": "ESC on PWM3",
+ "legend.16": "ESC on PWM4",
+ "legend.17": "ESC on PWM5",
+ "legend.18": "ESC on PWM6",
+ "legend.19": "RSSI 1 dBm",
+ "legend.2": "陀螺仪 Y",
+ "legend.20": "RSSI 2 dBm",
+ "legend.21": "LQ %",
+ "legend.22": "SNR dBm",
+ "legend.23": "天线",
+ "legend.24": "RF Mode",
+ "legend.25": "TX Power mW",
+ "legend.26": "RSSI dBm",
+ "legend.27": "LQ %",
+ "legend.28": "SNR dBm",
+ "legend.29": "CPU 负载",
+ "legend.3": "陀螺仪 Z",
+ "legend.30": "电池电压",
+ "legend.4": "加速度计 X",
+ "legend.5": "加速度计 Y",
+ "legend.6": "加速度计 Z",
+ "legend.7": "电调最高温度",
+ "legend.8": "电调最低电压",
+ "legend.9": "电调最大电流",
+ "menu.advanced": "高级配置",
+ "menu.configuration": "基础配置",
+ "menu.connect": "连接",
+ "menu.connecting": "连接中...",
+ "menu.data-output": "数据输出",
+ "menu.disconnect": "断开连接",
+ "menu.esc-flasher": "电调固件升级",
+ "menu.fc-flasher": "飞控固件升级",
+ "menu.lang": "语言",
+ "menu.menu": "選單",
+ "menu.rates": "Rates",
+ "menu.tpa": "TPA",
+ "mixer.0": "Tricopter",
+ "mixer.1": "Quad Plus",
+ "mixer.10": "Octo X",
+ "mixer.11": "Car",
+ "mixer.2": "Quad X",
+ "mixer.3": "Y4",
+ "mixer.4": "Y6",
+ "mixer.5": "Hexacopter Plus",
+ "mixer.6": "Hexacopter X",
+ "mixer.7": "P3+2 Hover",
+ "mixer.8": "P3+2 Forward",
+ "mixer.9": "Flat Octo",
+ "option.custom": "自定义",
+ "option.preset": "预设",
+ "option.user": "用户",
+ "output.0": "PWM",
+ "output.1": "OneShot 125",
+ "output.2": "OneShot 42",
+ "output.3": "Dshot 150",
+ "output.4": "Dshot 300",
+ "output.5": "Dshot 600",
+ "output.6": "Dshot 1200",
+ "output.7": "Dshot 2400",
+ "output.8": "FETtec OneWire",
+ "popup.newGUIavailable": "当前 GUI 版本过旧
请在以下链接中下载最新 GUI
Download
",
+ "rx-type.0": "Autodetect",
+ "rx-type.1": "4-6 single Channel",
+ "rx-type.10": "Jeti EX Bus",
+ "rx-type.11": "Futaba S-BUS",
+ "rx-type.12": "PPM:Pitch,Roll,Thr.,Yaw",
+ "rx-type.13": "PPM:Roll,Pitch,Thr.,Yaw",
+ "rx-type.14": "Multiplex SRXL",
+ "rx-type.15": "FrSky S-BUS (not inverted)",
+ "rx-type.16": "JR XBus Mode B",
+ "rx-type.17": "TBS CRSF",
+ "rx-type.18": "FrSky F-Port (un-inverted)",
+ "rx-type.19": "FrSky F-Port",
+ "rx-type.2": "PPM:Thr.,Roll,Pitch,Yaw",
+ "rx-type.20": "Futaba FAST S-BUS / DJI",
+ "rx-type.21": "IRC Ghost",
+ "rx-type.3": "PPM:Pitch,Thr.,Roll,Yaw",
+ "rx-type.4": "PPM:Thr.,Pitch,Yaw,Roll",
+ "rx-type.5": "PPM:Roll,Pitch,Yaw,Thr.",
+ "rx-type.6": "Spekt. Sat. DSM2",
+ "rx-type.7": "Spekt. Sat. DSMX",
+ "rx-type.8": "FrSky S-BUS",
+ "rx-type.9": "Gr. SUMD",
+ "serial.0": "Logger Disabled/OSD",
+ "serial.1": "Logger / 10%",
+ "serial.10": "Logger / 100%",
+ "serial.11": "VTX",
+ "serial.2": "Logger / 20%",
+ "serial.3": "Logger / 30%",
+ "serial.4": "Logger / 40%",
+ "serial.5": "Logger / 50%",
+ "serial.6": "Logger / 60%",
+ "serial.7": "Logger / 70%",
+ "serial.8": "Logger / 80%",
+ "serial.9": "Logger / 90%",
+ "serialtype.0": "KissProtocol/OSD",
+ "serialtype.1": "Logger",
+ "serialtype.2": "Receiver",
+ "serialtype.3": "VTX",
+ "serialtype.4": "ESC TLM / OneWire",
+ "serialtype.5": "Runcam",
+ "serialtype.6": "VTX + ESC TLM",
+ "serialtype.7": "GPS",
+ "serialtype.8": "DJI MSP",
+ "serialtype.9": "DISABLED",
+ "telemetry.0": "陀螺仪&加速度计",
+ "telemetry.1": "电调温度",
+ "telemetry.2": "电调电压",
+ "telemetry.3": "电调电流",
+ "telemetry.4": "电调电量消耗",
+ "telemetry.5": "电调E-RpM / 1000",
+ "telemetry.6": "电调回传数据",
+ "telemetry.7": "接收机上行数据",
+ "telemetry.8": "接收机下行数据",
+ "telemetry.9": "系统数据",
+ "text.3d": "3D",
+ "text.acro": "手动",
+ "text.activated": "已激活",
+ "text.armed": "已解锁",
+ "text.connect": "请连接 KISS 飞控至电脑, 并在上方选择正确端口",
+ "text.disarmed": "已锁定",
+ "text.eeprom-version": "EEPROM 版本:",
+ "text.enable-motor-test": "启用电机测试",
+ "text.esc-flasher-complete": "
出于安全考虑，电调与 KISS 飞控间的通讯已被中断
请拔下电池, 并重新连接 KISS 飞控
",
+ "text.esc-flasher-invalid-firmware": "该电调固件并不适合刷写",
+ "text.esc-flasher-loaded": "从 $2 加载了 $1 blocks",
+ "text.esc-flasher-progress": "进度 $1%",
+ "text.esc-flasher-success": "刷写成功!",
+ "text.esc-flasher-warning": "危险 ⚠️ 注意!!!
此电调升级工具仅适用于拥有 bootloader (版本号 1.02 或更高)的 KISS 电调!
升级电调前请移除桨叶!
使用此功能需自行承担相关风险
刷写成功后需对 KISS 飞控重新上电!
",
+ "text.esc-type": "电调型号",
+ "text.fc-flasher-complete": "刷写完成!!!",
+ "text.fc-flasher-failure": "失败: $1",
+ "text.fc-flasher-flashing": "刷写固件",
+ "text.fc-flasher-invalid-firmware": "该飞控固件并不适合刷写",
+ "text.fc-flasher-loaded": "从 $2 加载了 $1 blocks",
+ "text.fc-flasher-progress": "进度 $1%",
+ "text.fc-flasher-success": "刷写成功!",
+ "text.fc-flasher-unprotect": "Protection removed",
+ "text.fc-type": "FC type",
+ "text.firmware-version": "固件版本:",
+ "text.firmware-versions": "固件版本",
+ "text.flight-controller": "飞控型号",
+ "text.fs-mode-sec": "失控后自稳模式时长",
+ "text.level": "自稳",
+ "text.motor-test-button": "我已了解风险",
+ "text.motor-test-warning": "危险 ⚠️ 注意!!!
电机测试前请移除桨叶!
使用此功能需自行承担相关风险!
仅在飞控处于锁定状态时有效
",
+ "text.need-activation": "KISS 飞控尚未激活
请确认网络连接正常, 否则激活将会失败
",
+ "text.need-downgrade-gui": "KISS 固件比 GUI 所支持版本更旧
",
+ "text.need-upgrade-gui": "KISS 固件比 GUI 所支持版本更新
",
+ "text.not-activated": "未激活",
+ "text.rates-flips": "flips/",
+ "text.rates-max": "最大",
+ "text.rates-max-rotation": "最大角速度 > 2000 °/秒!",
+ "text.rates-rolls": "rolls/",
+ "text.rates-sec": "秒",
+ "text.rates-turns": "turns/",
+ "text.rates-warning": "警告 ⚠️",
+ "text.release-notes": "更新说明",
+ "text.rth": "返航",
+ "text.serial-clipboard": "序列号已复制至剪切板",
+ "text.serial-number": "序列号",
+ "text.serial-warning": "此选项为高级功能, 如果更改串口配置, 接线可能会不同于说明书
若想回到默认值, 请禁用此功能
",
+ "text.sn": "序列号:",
+ "text.turtle-mode": "反烏龜模式",
+ "text.voltage-prefix": "With battery voltage",
+ "text.voltage-suffix": "its influence on PIDS will be",
+ "title.adaptive-filter": "自适应滤波器",
+ "title.aux-functions": "辅助通道",
+ "title.battery-influence": "電池影響",
+ "title.buzzer-emulation": "模拟蜂鸣器",
+ "title.charts": "曲线图",
+ "title.custom-esc-orientation": "电机输出顺序",
+ "title.custom-orientation": "自定义飞控朝向",
+ "title.dji.osd": "DJI OSD",
+ "title.esc-flasher": "KISS 电调固件升级",
+ "title.esc-flasher-complete": "电调固件刷写完成!!!",
+ "title.esc-info": "KISS 电调信息",
+ "title.esc-settings": "KISS 电调设置",
+ "title.fc-flasher": "KISS 飞控固件升级",
+ "title.filter": "滤波",
+ "title.general-settings": "通用设置",
+ "title.gps": "GPS",
+ "title.homePoint": "返航点",
+ "title.kiss": "KISS 飞控 GUI",
+ "title.lap-timer": "Lap timer configuration",
+ "title.launchMode": "弹射模式",
+ "title.led-color": "LED 颜色",
+ "title.lipo-alarm": "电池警报",
+ "title.logger-config": "黑盒配置",
+ "title.logger-debug-configuration": "記錄器調試配置",
+ "title.motors": "电机",
+ "title.nonStandardDshot": "非标准 Dshot 信号",
+ "title.notch-filter": "陷波滤波器",
+ "title.other": "其他",
+ "title.pids": "PIDs",
+ "title.pids-and-rates": "PIDs & Rates",
+ "title.presets": "PID 预设",
+ "title.rates": "Rates",
+ "title.receiver": "接收机",
+ "title.reverse-motors": "Yaw 控制方向",
+ "title.rth": "KISS 返航",
+ "title.rx-deadbands": "接收机死区",
+ "title.serial": "串口",
+ "title.serial-config": "串口配置",
+ "title.telemetry": "数据",
+ "title.tpa-influence": "自定义TPA",
+ "title.tpa-influence-chart": "TPA 曲线图",
+ "title.uav-type": "无人机类型",
+ "title.vtx-config": "图传配置",
+ "title.warning": "警告 ⚠️",
+ "title.yaw-filter": "Yaw 滤波器",
+ "voltage.1": "電壓 1",
+ "voltage.2": "電壓 2",
+ "voltage.3": "電壓 3",
+ "volts.10": "10v",
+ "volts.10.5": "10.5v",
+ "volts.11": "11v",
+ "volts.11.5": "11.5v",
+ "volts.12": "12v",
+ "volts.12.5": "12.5v",
+ "volts.13": "13v",
+ "volts.13.5": "13.5v",
+ "volts.14": "14v",
+ "volts.14.5": "14.5v",
+ "volts.15": "15v",
+ "volts.15.5": "15.5v",
+ "volts.16": "16v",
+ "volts.16.5": "16.5v",
+ "volts.17": "17v",
+ "volts.17.5": "17.5v",
+ "volts.18": "18v",
+ "volts.18.5": "18.5v",
+ "volts.19": "19v",
+ "volts.19.5": "19.5v",
+ "volts.20": "20v",
+ "volts.20.5": "20.5v",
+ "volts.21": "21v",
+ "volts.21.5": "21.5v",
+ "volts.22": "22v",
+ "volts.22.5": "22.5v",
+ "vtx-freq.0": "A:1 (5865 MHz)",
+ "vtx-freq.1": "A:2 (5845 MHz)",
+ "vtx-freq.10": "B:3 (5771 MHz)",
+ "vtx-freq.11": "B:4 (5790 MHz)",
+ "vtx-freq.12": "B:5 (5809 MHz)",
+ "vtx-freq.13": "B:6 (5828 MHz)",
+ "vtx-freq.14": "B:7 (5847 MHz)",
+ "vtx-freq.15": "B:8 (5866 MHz)",
+ "vtx-freq.16": "E:1 (5705 MHz)",
+ "vtx-freq.17": "E:2 (5685 MHz)",
+ "vtx-freq.18": "E:3 (5665 MHz)",
+ "vtx-freq.19": "E:4 (5645 MHz)",
+ "vtx-freq.2": "A:3 (5825 MHz)",
+ "vtx-freq.20": "E:5 (5885 MHz)",
+ "vtx-freq.21": "E:6 (5905 MHz)",
+ "vtx-freq.22": "E:7 (5925 MHz)",
+ "vtx-freq.23": "E:8 (5945 MHz)",
+ "vtx-freq.24": "IRC/FS:1 (5740 MHz)",
+ "vtx-freq.25": "IRC/FS:2 (5760 MHz)",
+ "vtx-freq.26": "IRC/FS:3 (5780 MHz)",
+ "vtx-freq.27": "IRC/FS:4 (5800 MHz)",
+ "vtx-freq.28": "IRC/FS:5 (5820 MHz)",
+ "vtx-freq.29": "IRC/FS:6 (5840 MHz)",
+ "vtx-freq.3": "A:4 (5805 MHz)",
+ "vtx-freq.30": "IRC/FS:7 (5860 MHz)",
+ "vtx-freq.31": "IRC/FS:8 (5880 MHz)",
+ "vtx-freq.32": "RaceBand:1 (5658 MHz)",
+ "vtx-freq.33": "RaceBand:2 (5695 MHz)",
+ "vtx-freq.34": "RaceBand:3 (5732 MHz)",
+ "vtx-freq.35": "RaceBand:4 (5769 MHz)",
+ "vtx-freq.36": "RaceBand:5 (5806 MHz)",
+ "vtx-freq.37": "RaceBand:6 (5843 MHz)",
+ "vtx-freq.38": "RaceBand:7 (5880 MHz)",
+ "vtx-freq.39": "RaceBand:8 (5917 MHz)",
+ "vtx-freq.4": "A:5 (5785 MHz)",
+ "vtx-freq.5": "A:6 (5765 MHz)",
+ "vtx-freq.6": "A:7 (5745 MHz)",
+ "vtx-freq.7": "A:8 (5725 MHz)",
+ "vtx-freq.8": "B:1 (5733 MHz)",
+ "vtx-freq.9": "B:2 (5752 MHz)",
+ "vtx.0": "--",
+ "vtx.1": "Dummy VTX",
+ "vtx.2": "IRC Tramp HV",
+ "vtx.3": "TBS Unify Smart Audio",
+ "vtx.4": "TBS EVO Crossfire"
+}
\ No newline at end of file
From ccac992838b6f53711b62d1c5c1dffcf4d108066 Mon Sep 17 00:00:00 2001
From: ljlzonda <1500011309@pku.edu.cn>
Date: Mon, 5 Apr 2021 20:02:59 +0800
Subject: [PATCH 2/5] Delete zh_cn_ljl.json
---
zh_cn_ljl.json | 472 -------------------------------------------------
1 file changed, 472 deletions(-)
delete mode 100644 zh_cn_ljl.json
diff --git a/zh_cn_ljl.json b/zh_cn_ljl.json
deleted file mode 100644
index 8e6ef93..0000000
--- a/zh_cn_ljl.json
+++ /dev/null
@@ -1,472 +0,0 @@
-{
- "@metadata": {
- "authors": [
- "hsu8116"
- ],
- "last-updated": "2020-12-18",
- "locale": "zh",
- "message-documentation": "qqq"
- },
- "aux.0": "--",
- "aux.1": "低",
- "aux.2": "中低",
- "aux.3": "中",
- "aux.4": "中高",
- "aux.5": "高",
- "aux.6": "旋钮",
- "breakpoint.1": "零油门",
- "breakpoint.2": "断点 1",
- "breakpoint.3": "断点 2",
- "breakpoint.4": "满油门",
- "button.activate": "激活",
- "button.activation-failed": "激活失败 请重新尝试",
- "button.backup": "备份",
- "button.calibrate-accelerometer": "校准加速度计",
- "button.download-firmware": "下载固件",
- "button.esc-flasher-accept": "我已了解风险",
- "button.flash-firmware": "刷写固件",
- "button.reset-model": "重置模型",
- "button.restore": "恢复",
- "button.save": "保存",
- "button.saved": "已保存",
- "button.saving": "保存中...",
- "button.select-firmware": "选择本地固件",
- "button.select-remote-firmware": "选择网络固件",
- "button.share": "分享",
- "button.test": "测试",
- "column.3d": "3D",
- "column.3d-mode": "3D 模式",
- "column.PentaForward": "向前",
- "column.PentaHover": "悬停",
- "column.RealPit": "RealPit",
- "column.adaptive-filter": "开启自适应滤波器",
- "column.altitude": "海拔:",
- "column.angle-x": "X角度:",
- "column.angle-y": "Y角度:",
- "column.arm": "解锁",
- "column.battery-voltage": "鋰電池電壓 [V]",
- "column.buzzer": "蜂鸣器",
- "column.buzzer-emulation": "电机蜂鸣",
- "column.course": "航向:",
- "column.custom-tpa-influence": "使用自定义的 TPA 影响值",
- "column.d": "D",
- "column.debug-fields": "调试数据域",
- "column.device": "设备",
- "column.direction": "朝向",
- "column.distance": "距离",
- "column.dji.osd.crosshair": "中心十字准线",
- "column.dji.osd.gps": "GPS",
- "column.dji.osd.layout": "布局",
- "column.dji.osd.units": "单位",
- "column.esc-3dmode": "3D模式",
- "column.esc-mode": "电调协议",
- "column.esc-number": "电调",
- "column.esc-reverse": "反向",
- "column.fc-orientation": "飞控旋转角度 °",
- "column.i": "I",
- "column.idle": "CPU负载:",
- "column.influence-percentage": "影响值 [%]",
- "column.lap-timer-type": "連接類型",
- "column.latitude": "纬度:",
- "column.launchMode": "启用弹射模式",
- "column.led": "LED",
- "column.led-brightness": "LED 亮度",
- "column.led-color": "设置颜色",
- "column.level": "自稳",
- "column.level-max": "最大角度",
- "column.lipo-mah": "消耗电量大于 (mAh) ",
- "column.lipo-volts": "电压小于 (V) ",
- "column.longitude": "经度:",
- "column.lpf-frequency": "低通滤波器截止频率",
- "column.max-throttle": "最大油门值",
- "column.mid-command": "指令中点",
- "column.min-command": "指令低点",
- "column.min-throttle": "最小油门值",
- "column.mode": "模式:",
- "column.nonStandardDshot": "DShot non-standard led signal",
- "column.notch-center": "中心频率: (Hz)",
- "column.notch-cutoff": "截止频率: (Hz)",
- "column.p": "P",
- "column.pid-strength-percentage": "PID 強度 [%]",
- "column.pid-voltage-correction": "PID 電壓校正",
- "column.pitch": "Pitch",
- "column.rc-curve": "RC 曲线",
- "column.rc-expo": "RATE",
- "column.rc-rate": "RC Rate",
- "column.relativeAlt": "相对海拔",
- "column.reverse-motors": "反转 Yaw 控制方向（电机反转）",
- "column.roll": "Roll",
- "column.rth": "返航",
- "column.rth.descent.radius": "下降半径 (m)",
- "column.rth.failsafe.action": "失控时返航",
- "column.rth.home.action": "返航点动作",
- "column.rth.home.altitude": "返航点高度 (m)",
- "column.rth.hover.throttle": "悬停油门 (0 - 自动)",
- "column.rth.max.throttle": "最大油门 (0 - 自动)",
- "column.rth.min.throttle": "最小油门 (0 - 自动)",
- "column.rth.return.altitude": "返航高度 (m) (0 - 自动)",
- "column.rth.return.speed": "返航速度 (km/h)",
- "column.runcam-split": "RunCam Split",
- "column.rx-deadband": "死区区间",
- "column.satellites": "卫星数:",
- "column.setpoint-weight": "设定点权重 (%)",
- "column.speed": "速度:",
- "column.status": "状态:",
- "column.throttle": "油门",
- "column.throttle-percentage": "油门 [%]",
- "column.tpa": "TPA",
- "column.tri-yaw-invert": "三轴 YAW 舵机反向",
- "column.tri-yaw-mid": "三轴 YAW 舵机中点",
- "column.turtle-mode": "反乌龟",
- "column.use-custom-orientation": "使用自定义朝向",
- "column.use-custom-serialconfiguration": "使用高级串口配置",
- "column.voltage": "电压:",
- "column.vtx-band": "圖傳頻段",
- "column.vtx-channel": "圖傳頻道",
- "column.vtx-frequency": "频率",
- "column.vtx-high-power": "高功率 (mW) ",
- "column.vtx-low-power": "低功率 (mW) ",
- "column.vtx-power": "图传功率",
- "column.vtx-type": "类型",
- "column.yaw": "Yaw",
- "column.yaw-filter-strength": "Yaw 滤波强度",
- "debug.0": "--",
- "debug.1": "原始陀螺仪数据",
- "debug.2": "原始加速度计数据",
- "debug.3": "循環參數",
- "debug.4": "电调电压",
- "debug.5": "电调电流",
- "debug.6": "电调温度",
- "debug.7": "电调 RPM",
- "debug.8": "电调电量消耗",
- "debug.9": "滤波器频率",
- "escOrientation.0": "默认",
- "escOrientation.1": "顺时针旋转90°",
- "escOrientation.10": "BF 逆时针旋转90°",
- "escOrientation.11": "BF 顺/逆时针旋转180°",
- "escOrientation.12": "BF 上下翻转",
- "escOrientation.13": "BF 上下翻转后顺时针旋转90°",
- "escOrientation.14": "BF 上下翻转后逆时针旋转90°",
- "escOrientation.15": "BF 上下翻转后旋转180°",
- "escOrientation.2": "逆时针旋转90°",
- "escOrientation.3": "顺/逆时针旋转180°",
- "escOrientation.4": "上下翻转",
- "escOrientation.5": "上下翻转后顺时针旋转90°",
- "escOrientation.6": "上下翻转后逆时针旋转90°",
- "escOrientation.7": "上下翻转后旋转180°",
- "escOrientation.8": "BF",
- "escOrientation.9": "BF 顺时针旋转90°",
- "filter.0": "关",
- "filter.1": "高",
- "filter.2": "中高",
- "filter.3": "中",
- "filter.4": "中低",
- "filter.5": "低",
- "filter.6": "极低",
- "filter.7": "高级设置",
- "lap-timer.0": "--",
- "lap-timer.17": "EeasyRaceLapTimer on BUZZER pin",
- "lap-timer.18": "EeasyRaceLapTimer on PWM5 pin",
- "lap-timer.19": "EeasyRaceLapTimer on PWM6 pin",
- "led.black": "黑色",
- "led.blue": "蓝色",
- "led.custom": "自定义",
- "led.cyan": "青色",
- "led.green": "绿色",
- "led.orange": "橙色",
- "led.purple": "紫色",
- "led.red": "红色",
- "led.white": "白色",
- "led.yellow": "黄色",
- "legend.1": "陀螺仪 X",
- "legend.10": "电调共计消耗 A/h",
- "legend.11": "电调最大 eRpM",
- "legend.12": "电调最大功率",
- "legend.13": "ESC on PWM1",
- "legend.14": "ESC on PWM2",
- "legend.15": "ESC on PWM3",
- "legend.16": "ESC on PWM4",
- "legend.17": "ESC on PWM5",
- "legend.18": "ESC on PWM6",
- "legend.19": "RSSI 1 dBm",
- "legend.2": "陀螺仪 Y",
- "legend.20": "RSSI 2 dBm",
- "legend.21": "LQ %",
- "legend.22": "SNR dBm",
- "legend.23": "天线",
- "legend.24": "RF Mode",
- "legend.25": "TX Power mW",
- "legend.26": "RSSI dBm",
- "legend.27": "LQ %",
- "legend.28": "SNR dBm",
- "legend.29": "CPU 负载",
- "legend.3": "陀螺仪 Z",
- "legend.30": "电池电压",
- "legend.4": "加速度计 X",
- "legend.5": "加速度计 Y",
- "legend.6": "加速度计 Z",
- "legend.7": "电调最高温度",
- "legend.8": "电调最低电压",
- "legend.9": "电调最大电流",
- "menu.advanced": "高级配置",
- "menu.configuration": "基础配置",
- "menu.connect": "连接",
- "menu.connecting": "连接中...",
- "menu.data-output": "数据输出",
- "menu.disconnect": "断开连接",
- "menu.esc-flasher": "电调固件升级",
- "menu.fc-flasher": "飞控固件升级",
- "menu.lang": "语言",
- "menu.menu": "選單",
- "menu.rates": "Rates",
- "menu.tpa": "TPA",
- "mixer.0": "Tricopter",
- "mixer.1": "Quad Plus",
- "mixer.10": "Octo X",
- "mixer.11": "Car",
- "mixer.2": "Quad X",
- "mixer.3": "Y4",
- "mixer.4": "Y6",
- "mixer.5": "Hexacopter Plus",
- "mixer.6": "Hexacopter X",
- "mixer.7": "P3+2 Hover",
- "mixer.8": "P3+2 Forward",
- "mixer.9": "Flat Octo",
- "option.custom": "自定义",
- "option.preset": "预设",
- "option.user": "用户",
- "output.0": "PWM",
- "output.1": "OneShot 125",
- "output.2": "OneShot 42",
- "output.3": "Dshot 150",
- "output.4": "Dshot 300",
- "output.5": "Dshot 600",
- "output.6": "Dshot 1200",
- "output.7": "Dshot 2400",
- "output.8": "FETtec OneWire",
- "popup.newGUIavailable": "当前 GUI 版本过旧
请在以下链接中下载最新 GUI
Download
",
- "rx-type.0": "Autodetect",
- "rx-type.1": "4-6 single Channel",
- "rx-type.10": "Jeti EX Bus",
- "rx-type.11": "Futaba S-BUS",
- "rx-type.12": "PPM:Pitch,Roll,Thr.,Yaw",
- "rx-type.13": "PPM:Roll,Pitch,Thr.,Yaw",
- "rx-type.14": "Multiplex SRXL",
- "rx-type.15": "FrSky S-BUS (not inverted)",
- "rx-type.16": "JR XBus Mode B",
- "rx-type.17": "TBS CRSF",
- "rx-type.18": "FrSky F-Port (un-inverted)",
- "rx-type.19": "FrSky F-Port",
- "rx-type.2": "PPM:Thr.,Roll,Pitch,Yaw",
- "rx-type.20": "Futaba FAST S-BUS / DJI",
- "rx-type.21": "IRC Ghost",
- "rx-type.3": "PPM:Pitch,Thr.,Roll,Yaw",
- "rx-type.4": "PPM:Thr.,Pitch,Yaw,Roll",
- "rx-type.5": "PPM:Roll,Pitch,Yaw,Thr.",
- "rx-type.6": "Spekt. Sat. DSM2",
- "rx-type.7": "Spekt. Sat. DSMX",
- "rx-type.8": "FrSky S-BUS",
- "rx-type.9": "Gr. SUMD",
- "serial.0": "Logger Disabled/OSD",
- "serial.1": "Logger / 10%",
- "serial.10": "Logger / 100%",
- "serial.11": "VTX",
- "serial.2": "Logger / 20%",
- "serial.3": "Logger / 30%",
- "serial.4": "Logger / 40%",
- "serial.5": "Logger / 50%",
- "serial.6": "Logger / 60%",
- "serial.7": "Logger / 70%",
- "serial.8": "Logger / 80%",
- "serial.9": "Logger / 90%",
- "serialtype.0": "KissProtocol/OSD",
- "serialtype.1": "Logger",
- "serialtype.2": "Receiver",
- "serialtype.3": "VTX",
- "serialtype.4": "ESC TLM / OneWire",
- "serialtype.5": "Runcam",
- "serialtype.6": "VTX + ESC TLM",
- "serialtype.7": "GPS",
- "serialtype.8": "DJI MSP",
- "serialtype.9": "DISABLED",
- "telemetry.0": "陀螺仪&加速度计",
- "telemetry.1": "电调温度",
- "telemetry.2": "电调电压",
- "telemetry.3": "电调电流",
- "telemetry.4": "电调电量消耗",
- "telemetry.5": "电调E-RpM / 1000",
- "telemetry.6": "电调回传数据",
- "telemetry.7": "接收机上行数据",
- "telemetry.8": "接收机下行数据",
- "telemetry.9": "系统数据",
- "text.3d": "3D",
- "text.acro": "手动",
- "text.activated": "已激活",
- "text.armed": "已解锁",
- "text.connect": "请连接 KISS 飞控至电脑, 并在上方选择正确端口",
- "text.disarmed": "已锁定",
- "text.eeprom-version": "EEPROM 版本:",
- "text.enable-motor-test": "启用电机测试",
- "text.esc-flasher-complete": "
出于安全考虑，电调与 KISS 飞控间的通讯已被中断
请拔下电池, 并重新连接 KISS 飞控
",
- "text.esc-flasher-invalid-firmware": "该电调固件并不适合刷写",
- "text.esc-flasher-loaded": "从 $2 加载了 $1 blocks",
- "text.esc-flasher-progress": "进度 $1%",
- "text.esc-flasher-success": "刷写成功!",
- "text.esc-flasher-warning": "危险 ⚠️ 注意!!!
此电调升级工具仅适用于拥有 bootloader (版本号 1.02 或更高)的 KISS 电调!
升级电调前请移除桨叶!
使用此功能需自行承担相关风险
刷写成功后需对 KISS 飞控重新上电!
",
- "text.esc-type": "电调型号",
- "text.fc-flasher-complete": "刷写完成!!!",
- "text.fc-flasher-failure": "失败: $1",
- "text.fc-flasher-flashing": "刷写固件",
- "text.fc-flasher-invalid-firmware": "该飞控固件并不适合刷写",
- "text.fc-flasher-loaded": "从 $2 加载了 $1 blocks",
- "text.fc-flasher-progress": "进度 $1%",
- "text.fc-flasher-success": "刷写成功!",
- "text.fc-flasher-unprotect": "Protection removed",
- "text.fc-type": "FC type",
- "text.firmware-version": "固件版本:",
- "text.firmware-versions": "固件版本",
- "text.flight-controller": "飞控型号",
- "text.fs-mode-sec": "失控后自稳模式时长",
- "text.level": "自稳",
- "text.motor-test-button": "我已了解风险",
- "text.motor-test-warning": "危险 ⚠️ 注意!!!
电机测试前请移除桨叶!
使用此功能需自行承担相关风险!
仅在飞控处于锁定状态时有效
",
- "text.need-activation": "KISS 飞控尚未激活
请确认网络连接正常, 否则激活将会失败
",
- "text.need-downgrade-gui": "KISS 固件比 GUI 所支持版本更旧
",
- "text.need-upgrade-gui": "KISS 固件比 GUI 所支持版本更新
",
- "text.not-activated": "未激活",
- "text.rates-flips": "flips/",
- "text.rates-max": "最大",
- "text.rates-max-rotation": "最大角速度 > 2000 °/秒!",
- "text.rates-rolls": "rolls/",
- "text.rates-sec": "秒",
- "text.rates-turns": "turns/",
- "text.rates-warning": "警告 ⚠️",
- "text.release-notes": "更新说明",
- "text.rth": "返航",
- "text.serial-clipboard": "序列号已复制至剪切板",
- "text.serial-number": "序列号",
- "text.serial-warning": "此选项为高级功能, 如果更改串口配置, 接线可能会不同于说明书
若想回到默认值, 请禁用此功能
",
- "text.sn": "序列号:",
- "text.turtle-mode": "反烏龜模式",
- "text.voltage-prefix": "With battery voltage",
- "text.voltage-suffix": "its influence on PIDS will be",
- "title.adaptive-filter": "自适应滤波器",
- "title.aux-functions": "辅助通道",
- "title.battery-influence": "電池影響",
- "title.buzzer-emulation": "模拟蜂鸣器",
- "title.charts": "曲线图",
- "title.custom-esc-orientation": "电机输出顺序",
- "title.custom-orientation": "自定义飞控朝向",
- "title.dji.osd": "DJI OSD",
- "title.esc-flasher": "KISS 电调固件升级",
- "title.esc-flasher-complete": "电调固件刷写完成!!!",
- "title.esc-info": "KISS 电调信息",
- "title.esc-settings": "KISS 电调设置",
- "title.fc-flasher": "KISS 飞控固件升级",
- "title.filter": "滤波",
- "title.general-settings": "通用设置",
- "title.gps": "GPS",
- "title.homePoint": "返航点",
- "title.kiss": "KISS 飞控 GUI",
- "title.lap-timer": "Lap timer configuration",
- "title.launchMode": "弹射模式",
- "title.led-color": "LED 颜色",
- "title.lipo-alarm": "电池警报",
- "title.logger-config": "黑盒配置",
- "title.logger-debug-configuration": "記錄器調試配置",
- "title.motors": "电机",
- "title.nonStandardDshot": "非标准 Dshot 信号",
- "title.notch-filter": "陷波滤波器",
- "title.other": "其他",
- "title.pids": "PIDs",
- "title.pids-and-rates": "PIDs & Rates",
- "title.presets": "PID 预设",
- "title.rates": "Rates",
- "title.receiver": "接收机",
- "title.reverse-motors": "Yaw 控制方向",
- "title.rth": "KISS 返航",
- "title.rx-deadbands": "接收机死区",
- "title.serial": "串口",
- "title.serial-config": "串口配置",
- "title.telemetry": "数据",
- "title.tpa-influence": "自定义TPA",
- "title.tpa-influence-chart": "TPA 曲线图",
- "title.uav-type": "无人机类型",
- "title.vtx-config": "图传配置",
- "title.warning": "警告 ⚠️",
- "title.yaw-filter": "Yaw 滤波器",
- "voltage.1": "電壓 1",
- "voltage.2": "電壓 2",
- "voltage.3": "電壓 3",
- "volts.10": "10v",
- "volts.10.5": "10.5v",
- "volts.11": "11v",
- "volts.11.5": "11.5v",
- "volts.12": "12v",
- "volts.12.5": "12.5v",
- "volts.13": "13v",
- "volts.13.5": "13.5v",
- "volts.14": "14v",
- "volts.14.5": "14.5v",
- "volts.15": "15v",
- "volts.15.5": "15.5v",
- "volts.16": "16v",
- "volts.16.5": "16.5v",
- "volts.17": "17v",
- "volts.17.5": "17.5v",
- "volts.18": "18v",
- "volts.18.5": "18.5v",
- "volts.19": "19v",
- "volts.19.5": "19.5v",
- "volts.20": "20v",
- "volts.20.5": "20.5v",
- "volts.21": "21v",
- "volts.21.5": "21.5v",
- "volts.22": "22v",
- "volts.22.5": "22.5v",
- "vtx-freq.0": "A:1 (5865 MHz)",
- "vtx-freq.1": "A:2 (5845 MHz)",
- "vtx-freq.10": "B:3 (5771 MHz)",
- "vtx-freq.11": "B:4 (5790 MHz)",
- "vtx-freq.12": "B:5 (5809 MHz)",
- "vtx-freq.13": "B:6 (5828 MHz)",
- "vtx-freq.14": "B:7 (5847 MHz)",
- "vtx-freq.15": "B:8 (5866 MHz)",
- "vtx-freq.16": "E:1 (5705 MHz)",
- "vtx-freq.17": "E:2 (5685 MHz)",
- "vtx-freq.18": "E:3 (5665 MHz)",
- "vtx-freq.19": "E:4 (5645 MHz)",
- "vtx-freq.2": "A:3 (5825 MHz)",
- "vtx-freq.20": "E:5 (5885 MHz)",
- "vtx-freq.21": "E:6 (5905 MHz)",
- "vtx-freq.22": "E:7 (5925 MHz)",
- "vtx-freq.23": "E:8 (5945 MHz)",
- "vtx-freq.24": "IRC/FS:1 (5740 MHz)",
- "vtx-freq.25": "IRC/FS:2 (5760 MHz)",
- "vtx-freq.26": "IRC/FS:3 (5780 MHz)",
- "vtx-freq.27": "IRC/FS:4 (5800 MHz)",
- "vtx-freq.28": "IRC/FS:5 (5820 MHz)",
- "vtx-freq.29": "IRC/FS:6 (5840 MHz)",
- "vtx-freq.3": "A:4 (5805 MHz)",
- "vtx-freq.30": "IRC/FS:7 (5860 MHz)",
- "vtx-freq.31": "IRC/FS:8 (5880 MHz)",
- "vtx-freq.32": "RaceBand:1 (5658 MHz)",
- "vtx-freq.33": "RaceBand:2 (5695 MHz)",
- "vtx-freq.34": "RaceBand:3 (5732 MHz)",
- "vtx-freq.35": "RaceBand:4 (5769 MHz)",
- "vtx-freq.36": "RaceBand:5 (5806 MHz)",
- "vtx-freq.37": "RaceBand:6 (5843 MHz)",
- "vtx-freq.38": "RaceBand:7 (5880 MHz)",
- "vtx-freq.39": "RaceBand:8 (5917 MHz)",
- "vtx-freq.4": "A:5 (5785 MHz)",
- "vtx-freq.5": "A:6 (5765 MHz)",
- "vtx-freq.6": "A:7 (5745 MHz)",
- "vtx-freq.7": "A:8 (5725 MHz)",
- "vtx-freq.8": "B:1 (5733 MHz)",
- "vtx-freq.9": "B:2 (5752 MHz)",
- "vtx.0": "--",
- "vtx.1": "Dummy VTX",
- "vtx.2": "IRC Tramp HV",
- "vtx.3": "TBS Unify Smart Audio",
- "vtx.4": "TBS EVO Crossfire"
-}
\ No newline at end of file
From 3b9bf4c4ad5cd664d23e52ed0951fa91b304dd4c Mon Sep 17 00:00:00 2001
From: ljlzonda <1500011309@pku.edu.cn>
Date: Mon, 5 Apr 2021 20:26:15 +0800
Subject: [PATCH 3/5] Update zh_CN.json
---
zh_CN.json | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/zh_CN.json b/zh_CN.json
index 0395d06..479526a 100644
--- a/zh_CN.json
+++ b/zh_CN.json
@@ -29,7 +29,8 @@
"button.reset-model": "重置模型",
"button.restore": "恢复",
"button.save": "保存",
- "button.saved": "已保存！",
+
+ "button.saved": "已保存"
"button.saving": "保存中...",
"button.select-firmware": "选择本地固件",
"button.select-remote-firmware": "选择网络固件",
@@ -470,4 +471,4 @@
"vtx.2": "IRC Tramp HV",
"vtx.3": "TBS Unify Smart Audio",
"vtx.4": "TBS EVO Crossfire"
-}
\ No newline at end of file
+}
From 63b0f8fd275af39acdf2ac0a2c62e1fae0101b50 Mon Sep 17 00:00:00 2001
From: ljlzonda <1500011309@pku.edu.cn>
Date: Tue, 6 Apr 2021 00:01:30 +0800
Subject: [PATCH 4/5] Update zh_CN.json
---
zh_CN.json | 81 +++++++++++++++++++++++++++---------------------------
1 file changed, 40 insertions(+), 41 deletions(-)
diff --git a/zh_CN.json b/zh_CN.json
index 479526a..838d5c5 100644
--- a/zh_CN.json
+++ b/zh_CN.json
@@ -4,7 +4,7 @@
"ljlzonda",
"Hugo Chiang"
],
- "last-updated": "2021-04-02",
+ "last-updated": "2021-04-05",
"locale": "zh_CN",
"message-documentation": "qqq"
},
@@ -19,7 +19,7 @@
"breakpoint.2": "断点 1",
"breakpoint.3": "断点 2",
"breakpoint.4": "满油门",
- "button.activate": "立刻激活",
+ "button.activate": "激活",
"button.activation-failed": "激活失败，请重新尝试",
"button.backup": "备份",
"button.calibrate-accelerometer": "校准加速度计",
@@ -29,8 +29,7 @@
"button.reset-model": "重置模型",
"button.restore": "恢复",
"button.save": "保存",
-
- "button.saved": "已保存"
+ "button.saved": "已保存",
"button.saving": "保存中...",
"button.select-firmware": "选择本地固件",
"button.select-remote-firmware": "选择网络固件",
@@ -40,17 +39,17 @@
"column.3d-mode": "3D 模式",
"column.PentaForward": "向前",
"column.PentaHover": "悬停",
- "column.RealPit": "真·维修站模式",
+ "column.RealPit": "RealPit",
"column.adaptive-filter": "开启自适应滤波器",
"column.altitude": "海拔:",
- "column.angle-x": "X 角度:",
- "column.angle-y": "Y 角度:",
+ "column.angle-x": "X角度:",
+ "column.angle-y": "Y角度:",
"column.arm": "解锁",
"column.battery-voltage": "锂电池电压 [V]",
"column.buzzer": "蜂鸣器",
- "column.buzzer-emulation": "用电机模拟",
+ "column.buzzer-emulation": "电机蜂鸣",
"column.course": "航向:",
- "column.custom-tpa-influence": "使用自定义的 TPA 影响力数值",
+ "column.custom-tpa-influence": "使用自定义的 TPA 影响值",
"column.d": "D",
"column.debug-fields": "调试数据域",
"column.device": "设备",
@@ -60,17 +59,17 @@
"column.dji.osd.gps": "GPS",
"column.dji.osd.layout": "布局",
"column.dji.osd.units": "单位",
- "column.esc-3dmode": "3D 模式",
- "column.esc-mode": "电调模式",
+ "column.esc-3dmode": "3D模式",
+ "column.esc-mode": "电调协议",
"column.esc-number": "电调",
"column.esc-reverse": "反向",
"column.fc-orientation": "飞控旋转角度 °",
"column.i": "I",
- "column.idle": "怠速:",
- "column.influence-percentage": "影响 [%]",
+ "column.idle": "CPU负载:",
+ "column.influence-percentage": "影响值 [%]",
"column.lap-timer-type": "输入并连接",
"column.latitude": "纬度:",
- "column.launchMode": "已启用弹射模式",
+ "column.launchMode": "启用弹射模式",
"column.led": "LED",
"column.led-brightness": "LED 亮度",
"column.led-color": "设置颜色",
@@ -86,11 +85,11 @@
"column.min-throttle": "最小油门值",
"column.mode": "模式:",
"column.nonStandardDshot": "非标准 DShot LED 信号",
- "column.notch-center": "中心频率： (Hz)",
- "column.notch-cutoff": "截止频率： (Hz)",
+ "column.notch-center": "中心频率: (Hz)",
+ "column.notch-cutoff": "截止频率: (Hz)",
"column.p": "P",
"column.pid-strength-percentage": "PID 强度 [%]",
- "column.pid-voltage-correction": "使用 PID 电压校正",
+ "column.pid-voltage-correction": "PID 电压校正",
"column.pitch": "Pitch",
"column.rc-curve": "RC 曲线",
"column.rc-expo": "RATE",
@@ -98,7 +97,7 @@
"column.relativeAlt": "相对海拔",
"column.reverse-motors": "反转 Yaw 控制方向（电机反转）",
"column.roll": "Roll",
- "column.rth": "返航至返航点",
+ "column.rth": "返航",
"column.rth.descent.radius": "下降半径 (m)",
"column.rth.failsafe.action": "失控时返航",
"column.rth.home.action": "返航点动作",
@@ -109,7 +108,7 @@
"column.rth.return.altitude": "返航高度 (m) (0 - 自动)",
"column.rth.return.speed": "返航速度 (km/h)",
"column.runcam-split": "RunCam Split",
- "column.rx-deadband": "接收机信号死区",
+ "column.rx-deadband": "死区区间",
"column.satellites": "卫星数:",
"column.setpoint-weight": "设定点权重 (%)",
"column.speed": "速度:",
@@ -119,11 +118,11 @@
"column.tpa": "TPA",
"column.tri-yaw-invert": "三轴 YAW 舵机反向",
"column.tri-yaw-mid": "三轴 YAW 舵机中点",
- "column.turtle-mode": "反乌龟模式",
+ "column.turtle-mode": "反乌龟",
"column.use-custom-orientation": "使用自定义朝向",
"column.use-custom-serialconfiguration": "使用高级串口配置",
"column.voltage": "电压:",
- "column.vtx-band": "图传频段",
+ "column.vtx-band": "图传频组",
"column.vtx-channel": "图传频道",
"column.vtx-frequency": "频率",
"column.vtx-high-power": "高功率: (mW) ",
@@ -246,7 +245,7 @@
"output.6": "Dshot 1200",
"output.7": "Dshot 2400",
"output.8": "FETtec OneWire",
- "popup.newGUIavailable": "当前 GUI 版本过旧
请在以下链接中下载最新 GUI。
Download
",
+ "popup.newGUIavailable": "当前 GUI 版本过旧
请在以下链接中下载最新 GUI
Download
",
"rx-type.0": "自动检测",
"rx-type.1": "4-6 single Channel",
"rx-type.10": "Jeti EX Bus",
@@ -291,50 +290,50 @@
"serialtype.7": "GPS",
"serialtype.8": "DJI MSP",
"serialtype.9": "禁用",
- "telemetry.0": "陀螺仪 & 加速度计数据",
+ "telemetry.0": "陀螺仪 & 加速度计",
"telemetry.1": "电调温度",
"telemetry.2": "电调电压",
"telemetry.3": "电调电流",
"telemetry.4": "电调电量消耗",
- "telemetry.5": "电调 ERPM / 1000",
- "telemetry.6": "电调回传状态",
+ "telemetry.5": "电调 eRPM / 1000",
+ "telemetry.6": "电调回传数据",
"telemetry.7": "接收机上行数据",
"telemetry.8": "接收机下行数据",
- "telemetry.9": "系统",
+ "telemetry.9": "系统数据",
"text.3d": "3D",
"text.acro": "手动",
"text.activated": "已激活",
"text.armed": "已解锁",
- "text.connect": "请连接 KISS 飞控至电脑, 并在上方选择正确端口。",
+ "text.connect": "请连接 KISS 飞控至电脑, 并在上方选择正确端口",
"text.disarmed": "已锁定",
"text.eeprom-version": "EEPROM 版本:",
"text.enable-motor-test": "启用电机测试",
- "text.esc-flasher-complete": "
出于安全考虑，电调与 KISS 飞控间的通讯已被中断。
请拔下电池, 并重新连接 KISS 飞控。
",
- "text.esc-flasher-invalid-firmware": "该电调固件并不适合刷写。",
+ "text.esc-flasher-complete": "
出于安全考虑，电调与 KISS 飞控间的通讯已被中断
请拔下电池, 并重新连接 KISS 飞控
",
+ "text.esc-flasher-invalid-firmware": "该电调固件并不适合刷写",
"text.esc-flasher-loaded": "从 $2 加载了 $1 blocks",
"text.esc-flasher-progress": "进度 $1%",
"text.esc-flasher-success": "刷写成功!",
- "text.esc-flasher-warning": "危险 ⚠️ 注意!!!
此电调升级工具仅适用于拥有 bootloader (版本号 1.02 或更高)的 KISS 电调!
升级电调前请移除桨叶!
使用此功能需自行承担相关风险。
刷写成功后需对 KISS 飞控重新上电!
",
+ "text.esc-flasher-warning": "危险 ⚠️ 注意!!!
此电调升级工具仅适用于拥有 bootloader (版本号 1.02 或更高)的 KISS 电调!
升级电调前请移除桨叶!
使用此功能需自行承担相关风险
刷写成功后需对 KISS 飞控重新上电!
",
"text.esc-type": "电调型号",
"text.fc-flasher-complete": "刷写完成!!!",
"text.fc-flasher-failure": "失败: $1",
"text.fc-flasher-flashing": "刷写固件",
- "text.fc-flasher-invalid-firmware": "该飞控固件并不适合刷写。",
+ "text.fc-flasher-invalid-firmware": "该飞控固件并不适合刷写",
"text.fc-flasher-loaded": "从 $2 加载了 $1 blocks",
"text.fc-flasher-progress": "进度 $1%",
- "text.fc-flasher-success": "成功!",
+ "text.fc-flasher-success": "刷写成功!",
"text.fc-flasher-unprotect": "保护已移除",
"text.fc-type": "飞控类型",
"text.firmware-version": "固件版本:",
"text.firmware-versions": "固件版本",
- "text.flight-controller": "飞行控制器",
+ "text.flight-controller": "飞控型号",
"text.fs-mode-sec": "失控后自稳模式时长",
"text.level": "自稳",
"text.motor-test-button": "我已了解风险",
- "text.motor-test-warning": "危险 ⚠️ 注意!!!
电机测试前请移除桨叶!
使用此功能需自行承担相关风险!
仅在飞控处于锁定状态时有效。
",
- "text.need-activation": "您的 KISS 飞控尚未激活。
请确认网络连接正常, 否则激活将会失败。
",
- "text.need-downgrade-gui": "您的 KISS 固件比 GUI 所支持版本更旧。
",
- "text.need-upgrade-gui": "您的 KISS 固件比 GUI 所支持版本更新。
",
+ "text.motor-test-warning": "危险 ⚠️ 注意!!!
电机测试前请移除桨叶!
使用此功能需自行承担相关风险!
仅在飞控处于锁定状态时有效
",
+ "text.need-activation": "您的 KISS 飞控尚未激活
请确认网络连接正常, 否则激活将会失败
",
+ "text.need-downgrade-gui": "您的 KISS 固件比 GUI 所支持版本更旧
",
+ "text.need-upgrade-gui": "您的 KISS 固件比 GUI 所支持版本更新
",
"text.not-activated": "未激活",
"text.rates-flips": "flips/",
"text.rates-max": "最大",
@@ -345,7 +344,7 @@
"text.rates-warning": "⚠️ 警告 ⚠️",
"text.release-notes": "更新说明",
"text.rth": "返航",
- "text.serial-clipboard": "序列号已复制到剪切板",
+ "text.serial-clipboard": "序列号已复制至剪切板",
"text.serial-number": "序列号",
"text.serial-warning": "请注意，此选项为高级功能。如果更改串口配置, 接线可能会不同于说明书。br/>
若想回到默认值, 请禁用此功能。
",
"text.sn": "序列号:",
@@ -353,7 +352,7 @@
"text.voltage-prefix": "当电池电压低于",
"text.voltage-suffix": "它对于 PID 的影响力将会变成",
"title.adaptive-filter": "自适应滤波器",
- "title.aux-functions": "通道功能",
+ "title.aux-functions": "辅助通道",
"title.battery-influence": "电池影响",
"title.buzzer-emulation": "模拟蜂鸣器",
"title.charts": "曲线图",
@@ -377,7 +376,7 @@
"title.logger-config": "黑盒配置",
"title.logger-debug-configuration": "黑盒调试配置",
"title.motors": "电机",
- "title.nonStandardDshot": "非标准Dshot",
+ "title.nonStandardDshot": "非标准 Dshot 信号",
"title.notch-filter": "陷波滤波器",
"title.other": "其他",
"title.pids": "PIDs",
@@ -391,7 +390,7 @@
"title.serial": "串口",
"title.serial-config": "串口配置",
"title.telemetry": "数据",
- "title.tpa-influence": "TPA 影响力",
+ "title.tpa-influence": "自定义 TPA",
"title.tpa-influence-chart": "TPA 曲线图",
"title.uav-type": "无人机类型",
"title.vtx-config": "图传配置",
From b56fb43b910f071bb19dc5e001e58599e8961b57 Mon Sep 17 00:00:00 2001
From: ljlzonda <1500011309@pku.edu.cn>
Date: Tue, 6 Apr 2021 00:06:02 +0800
Subject: [PATCH 5/5] Update zh_CN.json
---
zh_CN.json | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/zh_CN.json b/zh_CN.json
index 838d5c5..0e6d62e 100644
--- a/zh_CN.json
+++ b/zh_CN.json
@@ -346,7 +346,7 @@
"text.rth": "返航",
"text.serial-clipboard": "序列号已复制至剪切板",
"text.serial-number": "序列号",
- "text.serial-warning": "请注意，此选项为高级功能。如果更改串口配置, 接线可能会不同于说明书。br/>
若想回到默认值, 请禁用此功能。
",
+ "text.serial-warning": "请注意，此选项为高级功能。如果更改串口配置, 接线可能会不同于说明书
若想回到默认值, 请禁用此功能
",
"text.sn": "序列号:",
"text.turtle-mode": "反乌龟模式",
"text.voltage-prefix": "当电池电压低于",